From the Sector

Climate change is causing temperatures to rise and storms to increase. Especially in inner cities, summers are becoming a burden for people. While densification makes use of existing infrastructure and avoids urban sprawl, it increases the amount of sealed surfaces. This has a negative impact on the environment and climate. Green facades bring more green into cities. If textile storage structures are used, they can even actively contribute to flood protection. The German Institutes of Textile and Fiber Research (DITF) have developed a corresponding "Living Wall".

The plants on the green facades are supplied with water and nutrients via an automatic irrigation system. The "Living Walls" operate largely autonomously. Sensory yarns detect the water and nutrient content. The effort for care and maintenance is low.

Innovative hydraulic textile structures regulate water flow. The rock wool plant substrate on which the plants grow has a large volume in a small space thanks to its structure. Depending on how heavy the precipitation is, the rainwater is stored in a textile structure and later used to irrigate the plants. In the event of heavy rainfall, the excess water is discharged into the sewage system with a time delay. In this way, the "Living Walls" developed at the DITF help to make efficient use of water as a resource in post-densified urban areas.

The research project also scientifically investigated the cooling performance of a green facade. Modern textile technology in the substrate promotes the "transpiration" of the plants. This creates evaporative cooling and lowers temperatures in the surrounding area.

The work of the Denkendorf research team also included a cost-benefit calculation and a life-cycle analysis. Based on the laboratory and outdoor studies, a "green value" was defined that can be used to evaluate and compare the effect of greening buildings as a whole.

Leaders assembled at the renowned forum for sustainability in fashion to mobilise action and usher in a transformative phase for the industry.

Hosted in the Copenhagen Concert Hall, on 27-28 June, Global Fashion Summit convened over 1000 revered representatives from brands, retailers, NGOs, policy, manufacturers, and innovators to transform ambition into action. The Summit was presented by Global Fashion Agenda (GFA), the non-profit organisation that is accelerating the transition to a net positive fashion industry, under the patronage of HRH The Crown Princess of Denmark.

This year’s theme ‘Ambition to Action’, galvanised participants to transform ambitions into concrete actions that can drive the industry towards more sustainable practices, both socially and environmentally. Under this premise, the event presented content experiences focused on tangible and evidence-based impact, with over half of the programme dedicated to educational and action-oriented business case studies.

This edition included more speakers and content than ever before, with the dynamic and action-orientated sessions spanning across four different stages. The Summit also facilitated more than 10 strategic roundtable meetings that brought together executives and policy makers for productive dialogues on how to address pressing sustainability issues and act accordingly. The content integrated the five priorities of the Fashion CEO Agenda, alongside critical challenges and tangible opportunities relating to some of the key forces that are shaping the fashion industry today: data, policy and storytelling.

Attendees heard from 137 speakers including HRH The Crown Princess of Denmark; Antoine Arnault, Image & Environment, LVMH Group; Jonathan Anderson, Creative Director & Founder, JW Anderson and Creative Director, Loewe; Virginijus Sinkevičius,  Commissioner for the Environment, Oceans and Fisheries, European Commission; Henriette Hallberg Thygesen, Chief Delivery Officer, Maersk; Aude Vergne, Chief Sustainability Officer, Chloé; Nicolaj Reffstrup, Founder, GANNI; Fanny Moizant, Co-Founder & President, Vestiaire Collective; Noel Kinder, Chief Sustainability Officer, Nike; Óscar García Maceiras, CEO, Inditex; Dr. Lewis Akenji, Managing Director, Hot or Cool Institute; Rachel Arthur, Advocacy Lead, Sustainable Fashion, United Nations Environment Programme; and many more.

Innovation Forum connected fashion companies with sustainable solution providers
This year’s Summit also presented an Innovation Forum, enabling small and large companies to meet with 26 sustainable solution providers – equipping them with the concrete tools to quickly turn words into meaningful actions. More than 350 facilitated business meetings between fashion companies and sustainable solution providers took place during the Summit.

Global Fashion Summit: Boston Edition will take place on 27 September 2023, which will mark the second time the Summit has been hosted outside of Copenhagen in its 14-year history.

Lectra supports the transformation of fashion, automotive and furniture companies by providing them with technological solutions that accelerate their transition to a more efficient and more sustainable Industry 4.0. In February, as part of the launch of its new roadmap, Lectra confirmed the importance of CSR in its strategy and presented its new priority measures for 2023-2025. By joining the UN Global Compact, Lectra demonstrates its commitment to reaching the Sustainable Development Goals of the United Nations.

Over the last few years, Lectra has stepped up its CSR initiatives. In 2011, the company implemented a CSR purchasing charter that covered 98% of its industrial purchases in 2022, excluding Gerber Technology (which was acquired in June 2021). In 2023, the new version of our CSR purchasing charter will be extended to Gerber suppliers, with the objective of enrolling 90% of all our industrial suppliers by 2025. Lectra also favors local procurement and production, as demonstrated by the recent inauguration of its manufacturing facility in Tolland, United States.

Another example: knowing that textiles generate 90% of the CO₂ emissions produced during the total lifecycle of a cutting room, Lectra strives to offer its customers solutions that optimize the use of materials. Lectra's equipment makes it possible to achieve material saving of 5 to 10%. In addition, to better inform consumers about product authenticity and provenant, the company has also expanded its software offer to material traceability, as show by the recent majority acquisition of TextileGenesis’ capital. Lectra is committed to systematically using eco-design principles by 2025 for its new equipment platforms in order to reduce its environmental footprint.

For 2023-2025, Lectra has decided to focus on 5 key areas through 12 measures:

1. MEETING THE HIGHEST ETHICAL STANDARDS
   - Uncompromising business ethics
   - Extension of our CSR purchasing policy
2. DESIGNING ECO-RESPONSIBLE OFFERS
   - Developing eco-designed products and services
   - Supplying products and services that help reduce our customers’ impact on the environment
   - Developing safe, accessible and easy-to-use solutions
3. FOSTERING AN INCLUSIVE, DIVERSE AND STIMULATING WORKING CULTURE
   - Zero tolerance for discrimination and harassment and equal opportunities for everyone
   - A working environment conducive to employee engagement
   - Balance between work and private life
   - Sustainable development of talents, team expertise and professional careers
   - Employees’ health and safety
4. REDUCING THE ENVIRONMENTAL FOOTPRINT OF OUR ACTIVITIES
   - Reducing the environmental impact of our company's activities
5. SUPPORTING FUTURE GENERATIONS
   - Supporting the development of professional skills and the employability of future generations

Following a strong start at the Spring Edition of Intertextile Shanghai Home Textiles early this year, global industry players have turned their sights to the next international event in August. As the first Autumn Edition to be held in the wake of China lifting many of its pandemic-related border restrictions, the three-day fair will gather around 1,000 international and domestic exhibitors. Traders looking to meet market demand will be able to source from an extensive range of trending and specialised home and contract textile products from 16 – 18 August 2023.

According to a recent market report, the global home textile market is expected to show a CAGR of 5.6% from 2023 – 2028 to reach USD 174.1 billion by the end of the forecast period. Asia-Pacific has dominated the global market in recent years, with China one of its most significant contributors.^[1]

As a manufacturing hub for home textiles, China is gradually recovering from social and business disruptions caused by the pandemic. Speaking at the recent Spring Edition, Ms Rosemary Li, Domestic Sales Manager of Zhangjiagang Coolist Life Technology Co Ltd, a long-time exhibitor specialised in bio-based and functional bedding products, said: “Since China relaxed its pandemic-related control and prevention measures, after Chinese New Year we have been flooded with orders. With both domestic and export orders increasing, it has been almost impossible for the production line to fulfil the order demand.”

While the spring show’s promising visitor flow was a positive start to the Chinese home textile industry’s post-pandemic era, a higher participation of overseas exhibitors and buyers is expected at the upcoming Autumn Edition

The return of special zones and international pavilions
Later this year in Shanghai, exhibitors will showcase their most up-to-date home and contract textile products, ranging from bedding & towelling, rugs, table & kitchen linen, upholstery & curtain fabrics, editors, home textile technologies and textile design. With a wealth of choices for buyers, several show highlights are listed below:

• Editor & Designer Zone: located in hall 5.1, the zone will feature international, high-end editor and designer brands brought by leading exhibitors J&C, Julai, Qianbaihui, Prestigious, Shanghai Lotus, SohoCut, Yada, and more.
• Country and region pavilions: premium suppliers from Belgium, Türkiye and Taiwan (China) will exhibit quality products in their designated pavilions in hall 6.1.
• Textile Designs: textile design studios from Japan, Portugal and Taiwan (China), namely Amilia Design Studio, Fine Art Inc and Tela's Design Lda, will also showcase their seasonal designs in hall 6.1.

Adding to buyers’ sourcing options, a multitude of domestic players from different categories will also showcase their respective products. Highlighted exhibitors include top curtain and curtain fabric suppliers Fu-Tex, Hangzhou Aico, Hexin and Xiaoxuanchuang; bedding suppliers Coolist, Huizhou Wah Shing and Yantai North Home; as well as Hightex, Huatex, Maya and Suzhou Roufang from the upholstery and sofa fabric sector.

Fairgoers can also learn more about the upcoming global trends and designs by visiting the ‘2023 – 2024 Intertextile International Lifestyle Trend’ area. In aid of this, Intertextile Shanghai Home Textiles has joined forces with NellyRodi™, the renowned French forecasting agency, to present the design theme for 2023 – 2024: ‘ALIVE’. HUMAN CAPITAL, ROUSING COMMITMENT and UNREAL REALITIES are the theme’s three main trends.

^[1] Globe Newswire: Global Home Textile Market Report 2023-2028: Increase in Consumer Spending on Home Renovation and Decoration Bodes Well for the Sector. https://www.globenewswire.com/en/news-release/2023/03/08/2622718/28124/en/Global-Home-Textile-Market-Report-2023-2028-Increase-in-Consumer-Spending-on-Home-Renovation-and-Decoration-Bodes-Well-for-the-Sector.html

The theme for the 13th edition of RISE® (Research, Innovation & Science for Engineered Fabrics) is “A New Era in Manufacturing for Sustainability.” Technology scouts, product managers, senior scientists, development engineers, and business developers will convene September 26-27 at North Carolina State University and The Nonwovens Institute in Raleigh, NC to discover the latest nonwoven innovations.

The RISE conference program features industry leaders from these companies: American Truetzschler, Berry Global, Dilo Incorporated, Evonik Corporation, Indorama Ventures USA, MANN+HUMMEL, the National Renewable Energy Laboratory, NatureWorks, The Nonwovens Institute, Owens Corning, PCI Wood Mackenzie, PolyQuest, Reifenhäuser REICOFIL GmbH, and Simplifyber. These industry experts will discuss the future of nonwoven manufacturing, advances in filter media, rPolymer developments, and sustainable applications.

Innovations that advance the nonwovens industry will be recognized with the 2023 RISE® Innovation Award. Three finalists will present their innovative products or technologies to RISE participants, Tuesday, September 26th. The 2022 award winner was DiaperRecycle, cat litter made from recycled diapers.

RISE participants have the option of touring The Nonwovens Institute’s $65 million-plus, 60,000 square-foot facilities featuring state-of-the-art equipment, pilot lines, and analytical laboratories, as well as attending an evening reception at the Lonnie Pool Golf Course Clubhouse. During the evening reception, graduate students and faculty from North Carolina State University will feature their research and technical advances with poster presentations. The tour and reception will take place Tuesday, September 26th and the tour is limited to 40 attendees.

Just in time for ITMA 2023 in Milan, the flat knitting machine manufacturer STOLL has launched its new collection COLOR IN KNITTING. It holds a range of knitting techniques that were ideated for novel super fine machine gauges such as the E20.

In addition, STOLL reveals its internal design workflow, showcasing how digital software tools can speed up the design process. The core of this is k.innovation CREATE DESIGN. Through the utilization of STOLL’s jointly developed design software solution, k.innovation CREATE DESIGN, in collaboration with @KM.ON, the shape and structures of a garment, can be digitally created, allowing for its simulation before it is even knitted. The interfaces to various external 3D software tools, allow for a realistic representation of the garment facilitating faster design decisions. Once the virtual knits, made in the CREATE DESIGN software are ready for manufacturing, it will be send to a knitting technician for further processing in k.innovation CREATE PLUS, This significantly speeds up product development while reducing communication issues between designers and technicians.

Sustainability and responsible handling of precious natural resources were key factors driving the development of the latest trend collection, COLOR IN KNITTING. STOLL-knit and wear®, a technique that stands for seamless knitted garments, can play a significant role in reducing waste. In addition, fewer process steps are required in the production chain - with advantages for production efficiency.
For another highlight of COLOR IN KNITTING, the STOLL creatives have worked on imitating different yarn effects with knitting technology such as slub yarn optics or the simulation of fabrics like crepe de chine/crepe georgette

On the occasion of the 150th anniversary of STOLL, COLOR IN KNITTING features a selection of vintage pattern replicates. These patterns can be found in STOLL’s extensive sample archives in Reutlingen. It is impressive to learn that all these former fabric constructions can still be replicated today and also reinvented with todays machine features. This approach showcases the steep progression of technical advancements over the past 150 years.

STOLL´s latest trend collection culminates in the creation of an invaluable resource: the book “Color in Knitting: By Designers, for Designers”. This publication aims to cater to a diverse audience by presenting a comprehensive guide to designing with colors using various flat knitting technologies and will be presented in the chapter "Book release".

From 9 to 11 August 2023, IFCO, Istanbul Fashion Connection will be held for the fourth time at the Istanbul Expo Center at 6 Halls. The fashion fair is organised by ITKIB Fairs, a subsidiary of Istanbul Apparel Exporter's Association, the umbrella organisation of the Turkish fashion and apparel industry.

IFCO has developed into a hub for fashion enthusiasts, designers, buyers and trendsetters and has established itself as an important international platform for the global fashion industry. IFCO brings together around 400 exhibitors from all product groups of the apparel and fashion industry under one roof in six clearly structured halls: womenswear, menswear, childrenswear, denim, sportswear, evening and occasion wear, bridal wear, lingerie, hosiery, leather and fur, shoes and accessories.

From high-end tailoring to streetwear and sustainable fashion, the fair will present a wide range of styles and trends. IFCO Brands present market leaders such as İpekyol, Climber, Damat, Kiğılı, B&G Store, Lufian, Jakamen, NaraMaxx, Giovane Gentile and Lee Cooper using IFCOto further expand their international network.

THE CORE ISTANBUL, successfully launched at IFCO in February, once again features a fascinating mix of established and emerging important Turkish designerswith their creative and innovative creations.

One focus of the fair will be the topic of sustainability. Companies will show their innovations. Ekoteks, the association's sustainability laboratory, supports the development of sustainable production and will also have a stand at IFCO to present the latest developments in this area.

The extensive supporting program with fashion shows and trend zones inspires visitors with the latest fashion trends and styles, while the seminars and workshops address current topics in the fashion industry such as digital transformation, smart clothing, technical textiles and sustainability.

30,000 visitors from more than 100 countries are expected at the upcoming IFCO, mainly from the EU, UK, Eastern Europe, CIS, North Africa, Middle East and the USA. The show also offers networking events, such as B2B Speed Dating, which brings together fashion designers, brands, manufacturers, buyers and industry experts to exchange ideas and forge potential business relationships. This is an important aspect of the fair that has helped to position Istanbul Fashion Connection as a key meeting place for the fashion industry.

ECHA’s Enforcement Forum agreed to launch an EU-wide project to check that products sold online comply with REACH restrictions and the requirements of the Classification, Labelling and Packaging (CLP) Regulation. Its subgroup on Biocidal Products Regulation, BPRS, agreed to launch a project on labelling of biocidal products.

The Enforcement Forum including its BPR subgroup (BPRS) is a network of enforcement authorities from the EU and EEA. They are responsible for coordinating the enforcement of the REACH, CLP, PIC, POPs and the Biocidal Product Regulations with the aim of protecting our health and the environment while ensuring a level playing field for companies across the EU market.

Inspections in this REACH-EN-FORCE (REF)-13 project will take place in 2025. The objective is to check that products, such as toys, common household goods or chemicals, sold online comply with REACH restrictions. Inspectors will also check that mixtures are classified, labelled and packaged in line with CLP and that online offers include the required information about the hazards of the mixture. Inspectors may also check compliance with restrictions under the Persistent Organic Pollutants (POPs) Regulation and the Restriction of Hazardous Substances (RoHS) Directive.

The online sale of chemicals is an area of high non-compliance. In a previous Forum project (REF-8), inspectors often found that mixtures and articles sold online contained restricted hazardous substances, including those causing cancer. The project found that 78 % of controlled mixtures or articles did not fulfil the conditions of REACH restrictions.

In the upcoming project, inspectors can rely on stricter rules governing online sales, such as the Digital Services Act and General Product Safety Regulation. These new laws are expected to make enforcement stronger.

The Forum’s subgroup on Biocidal Products Regulation (BPRS), agreed that the next major enforcement project on biocides (BEF-3) will focus on controlling the correctness of product labels for biocidal products. Inspectors will check that the information on the labelling of biocides corresponds to that what has been authorised and included in the Summary of Product Characteristics. Inspectors may also check the presence and quality of information in the Safety Data Sheets, where it is required for biocidal products.

Both REF-13 and BEF-3 projects will be prepared in 2024, inspections are planned for 2025 and reports are expected to be published in 2026.

During the meeting, the Forum members elected a new chair and vice chair. Henrik Hedlund (SE) will start as the Forum chair and Katja vom Hofe (DE) and Maria Orphanou (CY) will be the vice chairs as of 21 June 2023. Its biocides subgroup elected Helmut de Vos (BE) as chair and Jenny Karlsson (SE) and Eugen Anwander (AT) as vice chairs.

Over 1.2 million people came together to Move For The Planet, a new global initiative by adidas that harnessed the collective activity of sporting communities across the world.

Over 173 million active minutes were tracked overall across countries in the adidas Running app with adidas pledging to donate €1 to Common Goal for every 10 minutes of activity logged across 34 sports between June 1-12 – up to €1.5m.

The contributions will support projects around the globe that educate and engage communities through sport. One such organisation selected by adidas and Common Goal is the ISF Cambodia (ISF), a charity with 16 years of experience using education and sport to change lives.

The specific project will enable the installation of solar panels to light their football fields – creating safer spaces for girls and the wider community to practice in whilst at the same time, using renewable energy.

In addition to the solar panels, together with Football for Future and Common Goal, adidas is facilitating education on environmental sustainability through sport for ISF with a focus on helping the organization to raise awareness of environmental action in the community.

This will complement ISF workshops on environmental protection, the use of single use-plastic and waste management processes, enabling the children and young adults involved to be positive role models for their community.

Move For The Planet is part of adidas’ wider sustainability initiatives as the company continues its mission to make what’s best for the athlete. Earlier this year, adidas announced that it is ahead of schedule in its journey to replace virgin polyester with recycled polyester in its products wherever possible by the end of 2024. In 2022, 96% of all the polyester adidas used was recycled.

As part of Sappi Europe's full scale decarbonisation roadmap, Gratkorn mill is expanding the share of biomass to be used as an energy source, further driving the move away from fossil fuels as part of the mill’s contribution to the European roadmap. The project follows the recent modernisation of the power plant boiler which enabled the shift from coal to a combined approach of biomass and natural gas.

The mill is now embarking on a next step, enhancing its infrastructure and therefore capacity in order to handle the delivery, sorting and processing of increased biomass levels. This increased utilisation requires an improved biomass handling system at the mill as well as decentralised intermediate storage terminals within the surrounding regions.

"With our long-standing competent wood sourcing partner Papierholz Austria, we will continue our journey to move away from fossil fuels at Gratkorn mill and work towards a climate-neutral future”, says Peter Putz, Managing Director of Sappi Austria GmbH.

For the near term, Sappi’s decarbonisation roadmap includes close to 80 projects being carried out across its European mills by 2025.

“Our 2025 roadmap identifies the path we have embarked on towards a carbon-neutral future,” explains Sarah Price, Director Sustainability of Sappi Europe. The objective is to reduce emissions of specific greenhouse gases (Scope 1 and 2) by 25 per cent and to increase the share of renewable energy in Europe to 50 per cent by 2025 (compared to 2019). Additionally, Sappi’s 2030 science-based target is to reduce carbon emissions by 41.5% per ton of product. “We’re already making good progress towards these targets, with a large number of projects already well-underway or completed”.