From the Sector

Retailers invest in emotionalisation and digitalisation +++ Top theme: linking online with offline shopping +++ Focus on sustainability +++ Accompanying Stages and Specials received very well

The World’s No.1 Retail Trade Fair, EuroShop 2020, drew to a close on Thursday (20 February 2020) after five successful days in Düsseldorf: 2,300 exhibitors from 57 nations reported of very good leads and concluded business deals. Furthermore, lively follow-up business is expected. 94,000 visitors travelled to the Rhine to gather information on the line-up of products, trends and concepts for retailers and their partners featured in 16 exhibition halls.  

“We are delighted that EuroShop once again successfully proved to be the most relevant platform for the global retail community when it comes to trends, inspirations and networking. Our exhibitors deserve the highest praise for their loyalty. With their innovative power they again proved the major attraction for an entire industry,” said Erhard Wienkamp, Managing Director at Messe Düsseldorf, voicing his great satisfaction with EuroShop 2020 results.

Exhibitors especially applauded the high international attendance at EuroShop. 70% of the EuroShop audience travelled to Düsseldorf from abroad. Large delegations came for example from Brazil, Australia and New Zealand. Trade visitors from a total of 142 countries attended EuroShop 2020.

“This high level of international interest clearly documents the dynamism of the global retail world and the exceptional position EuroShop enjoys as its economic engine,” said Michael Gerling, Chairman of the EuroShop Advisory Board and CEO of the EHI Retail Institute Cologne.

“The success of eCommerce is a real encouragement for retailers: they have understood they have to give their shoppers good reasons beyond the ranges to enter their stores. This competition has taken retail as a whole to the next quality level. Investment is being made in shop fitting so as to create customer journeys,” explains Gerling who adds: “Beyond this, retail digitalisation is booming. It enables retailers to offer their shoppers even more services and link online and offline channels, on the one hand, while simplifying process flows, logistics and lots more, on the other.” At EuroShop 2020 digital transformation was therefore a key focus, also in terms of achieving the highest energy efficiency and sustainability possible.

Exhibitors underlined the high level of expertise among visitors at the event, especially their pronounced decision-making powers, because 70% of the trade fair guests were in international top management. Many of them also used their visit to EuroShop to learn about best practice cases and forward-looking trends in retail at the in total eight Stages. The varied programme of lectures held on the individual Stages on such topics as Retail Technology, Architecture and Store Design or Expo & Event was well attended across the board. Meeting with the same high level of approval were the numerous Specials at EuroShop, including the Start-up Hub, the Designer Village and Premium City.

Numbers speak for themselves here: 96% of trade fair visitors were satisfied with their visit to the trade fair. Just as many confirmed the outstanding position of EuroShop as a trend barometer, networking platform and largest event for the retail sectors.

Due to the current situation associated with the Coronavirus 19.000 visitors less attended this time than at the record event 2017.

The next EuroShop will be held in Düsseldorf from 26 February to 2 March 2023.  

Ascend Performance Materials, the largest fully integrated producer of polyamide 66 resin, announced today it signed an agreement to purchase Poliblend and Esseti Plast GD from D’Ottavio Group. The acquisition includes a manufacturing facility in Mozzate, Italy, the masterbatch portfolio of Esseti Plast GD and the engineering plastics portfolio of Poliblend, which consists of virgin and recycled grades of PA66, PA6, PBT and POM.

Poliblend offers compounding and masterbatch services, including color and additive concentrates that enhance the appeal and end-use performance of plastics products, packaging and fibers. Its certifications include ISO 9001, ISO 14001 and ISO TS 16949.

Giancarlo D’Ottavio, Poliblend’s president, will continue to run Poliblend’s operations and join Ascend’s European management team. Terms of the transaction were not disclosed. The acquisition is expected to close in the second quarter.

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The second technology focus offers new opportunities for the Egyptian market and the Middle Eastern markets in particular: with Oerlikon Neumag’s BCF S8 monocolor and tricolor system, the segment will be unveiling its new carpet yarn production flagship. Superlative spinning speeds, up to 700 individual filaments, finer titers of up to 2.5 dpf – the performance data and technological finesse of the new system have already made a huge impression at numerous trade fairs and roadshows over the past year. The tricolor’s core component is the new, patent-pending Color Pop Compacting unit (CPC-T) for even more flexible and more even color separation. With the CPC-T, individually-controllable air pressures for each color provide pre-tangling, which accentuates the colors and hence makes more than 200,000 different shades possible. Whereas it has been very difficult to manufacture strongly color-separated or color-accentuated BCF yarns from polyamide 6 to date, this will in future be possible thanks to the CPC-T system. As a result of the new design, the CPC-T is now also suitable for processes with low yarn tensions.
 
Expanded product offering for manufacturing carpet yarns
Know-how covering all relevant technologies deployed in manmade fiber spinning plants enables Oerlikon – as the world’s only manufacturer – to expand its range of products and services for making carpet yarns. The POY- and texturing-based system concept is designed for a carpet and home textiles segment that demands particularly soft and bulky polyester yarns with BCF-like properties. Here, the aim is to produce yarns with titers of max. 1300dtex and typically more than 1,000 filaments, with typical products including, for example, 1300dtex f1152, 660dtex f1152 and 990dtex f768. The machine concept comprises the well-known WINGS HD POY winder, along with the eAFK Big-V texturing machine.

In the latest short film released on the Monforts YouTube Channel – captured at the recent Denim Première Vision show in London – some of the leading global manufacturers discuss their initiatives for more sustainable denim production.

Cone Denim, based in Greensboro, North Carolina, for example, can lay claim to having put in place its first environmental control measures back in the 1940s when the company first started recycling its water.

“It was a method of efficiency even back then, eighty years ago,” says Gabriel Magopat, of the company’s UK customer service centre, “but  producing high quality products is another method of being sustainable and of being efficient, and I think that’s what Cone stands for. We have an amazing history.”

Cone Denim is known for its signature S Gene® stretch denims which have traditionally incorporated polyester components to provide the stretch. It has now partnered with Intrinsic Advanced Materials of Gastonia, also in North Carolina, to introduce patent-pending CiCLO stretch polyester fibres into its denim collections. 

While still being synthetic based, CiCLO polyester is able to biodegrade in marine environments, wastewater treatment plants and landfill conditions, at rates similar to natural fibres like wool. 

This more sustainable solution for stretch is also being introduced to China for the first time by another leading denim supplier, Advance Denim.

“Advance Denim is spending its resources on being the most technologically advanced company in China, and also the most sustainable,” says Mark Ix, the company’s Director of Marketing. “We are investing heavily in our manufacturing to save both water and chemicals to create cleaner products.”

Monforts denim customer Berto is a family-owned company with its main denim mill in Bovolenta, a small rural town near to Padua in the north east of Italy, where respect for the environment has always been a must.

“The family has always been focused on respect for the environment,” says Berto’s Marketing Manager Francesca Palento. “In particular, we have a river next to the company from which we take our water for production and we then return it cleaner than it was before. We are also now producing GOTS and Global Recycling Standard jean produced with yarns made from our own internal waste production.”

Pakistan’s Soorty has recently received Cradle to Cradle Gold certification – the most stringent and exacting sustainable standard currently in existence – for its Pure D range of denims. These are produced using the company’s proprietary Zero Waste Water dyeing technology, in combination with the most advanced Monforts finishing machines. 

“Our very latest collection is called Climate Jeans, because every single product we now produce draws attention to the climate emergency we are living through right now,” says Eda Dikman, Soorty’s Marketing Communications Manager. “Sustainability is very important to us because we produce at scale and all of the actions we take reflect on the planet.”

• Series order for a total of 500 units
• First SGL Carbon component project for manned autonomous aviation

SGL Carbon will begin serial production of landing gear made from braided carbon fiber material early this year. The landing skids will be installed in around 500 air taxis worldwide over the next two years.

The air taxis will be powered by several electric motors. To optimize the range of the taxis, every single gram counts. Measuring about two meters in length and 1.5 meters in width, the ultra-light landing skid will weigh less than three kilograms, making it about 15 percent lighter than a similar component made from aluminum. This increases the potential flight time capacity of the air taxi which is a key differentiator for the air taxi operator.

“With with our landing gear we help to shape this very new, promising application of manned, autonomous civil aviation. This involvement also demonstrates our wide range of services. From engineering, to prototype manufacture, to serial production with our own materials – all of our competences along the entire value chain made a contribution to the project ,” emphasizes Dr. Andreas Erber, Head of the Aerospace segment of the Composites – Fibers & Materials business unit at SGL Carbon.

The landing gear was developed in close collaboration between customer experts and specialists from SGL Carbon. The carbon fibers for the component are produced at the SGL Carbon plant in Muir of Ord, Scotland. The final part is being manufactured at the SGL Carbon site in Innkreis, Austria.

Peruvian print business delivering DTG capabilities for prestigious apparel brands worldwide

Kornit Digital announced that Textil del Valle South America, a vertically integrated garment manufacturing company based in Peru, has chosen to implement Kornit’s digital direct-to-garment (DTG) printing technology at its 1.1 million-square-foot facility in Lima, Peru.

Textil del Valle services many of the world’s most prominent apparel brands, including global leaders in sports and athleisurewear.

“Kornit’s sustainable print technology provides the last piece of the puzzle, so we have the ‘full package’ for manufacturing the garment itself, imprinting it on demand based on the customer need, and shipping it ourselves, all from a single location,” said Juan Jose Cordova, General Manager at Textil del Valle. “Our market has been veering away from stocking shelves with inventory that may or may not sell, and the Kornit solution helps our business and customers eliminate that uncertainty and risk. We are the most sustainable textile plant in the world, and Kornit enables us to continue answering market demands in an efficient, responsible manner.”

• Elleti Group takes center stage at Denim PV to present a special project realized in partnership with MYR, and to share a selection of iconic garments belonging to M.O.D.E, the company’s Museum of Denim.
• Collaboration will be the main theme of the two-day event, involving not only the leading company’s expertise in garment-making but also its tradition, starring M.O.D.E in its firstever collaboration with a trade show and in Alessio Berto’s  RE-TRACE workshops series.

London – When it comes to long-established traditions in the denim industry, Elleti Group stands out as one of the main key players: strong in the business since the 80’s, the company is highlyspecialized in laundry and garment-making services while covering the entire denim production cycle in its eleven production hub.

Its heritage and approach define a valuable and renowned legacy that is now taking stage at Denim PV on December 3rd and 4th. For the occasion, Elleti Group joined forces and knowledge with MYR, start-up program conceived to digitalize the creative process and connect users, suppliers and final consumers through a digital platform. Both companies will be in the Garments and Finishings area - booth C3,  howcasing an exclusive project to highlight their creativity and competences.

Starting from a selection of bold designs, entirely envisioned and developed with MYR software, Elleti Group worked to recreate their look and fit on six garments, manufacturing each piece according to its signature innovative and responsible approach. Featuring forefront machinery and cutting-edge processing solutions, this relies on a continuous research effort focused on granting high-quality products while increasingly reducing their knock-on effect on both workers and the environment.

The result turned out to be very impactful and inspiring, with denim solutions which proved the mastery of the leading Italian company in the art of washing, cutting and stitching the iconic blue fabric, as well as the great support that MYR software provided in the development of the collections.

M.O.D.E. x Denim PV: an exclusive exhibition to explore the history of denim

Opened on June 19th, M.O.D.E. – Museum of Denim Elleti Group – is a precious resource located within the company’s Headquarters in San Bonifacio (Italy). Here are 106 pieces dating between the second half of the XIX century and the 70s, resulting in an invaluable testimony of how denim evolved through the centuries. For the first-ever collaboration of the Museum with a trade show, a selection of 20 historical garments is exploring three research areas. These are meant to focus on:

• The brand identity of jeans through the main evolutions at Lee;
• The influence of WWII on the design, the creation and the wearing of clothing;
• The history of overall.

Monforts Textilmaschinen GmbH & Co. KG will be providing information on its extensive range of coating and finishing technologies for the production of nonwovens and technical textiles at the forthcoming Techtextil India exhibition.

“India is already a very important market for Monforts and there are exciting prospects ahead for Indian manufacturers of technical textiles, who are well positioned to capitalise on growth opportunities,” says Monforts Head of Denim Hans Wroblowski, who will be at the Monforts stand in Hall 4, booth C52 at the show. “India has one of the largest working-age populations in the world and a complete textile value chain for both natural and synthetic fibres.”

In addition, he adds, India’s government, through its Ministry of Textiles, has been actively promoting the growth of technical textiles through various programmes based on investment promotion, subsidies, the creation of infrastructure and the stimulation of consumption.

As a result, India’s Ministry of Textiles is forecasting that the growth of technical textiles in the country will be over 18% annually in the next few years, from a value of US$16.6 billion in 2018 to US$28.7 billion in 2021.

Value addition

High value-added technical products such as wide-width digital printing substrates, carbon fabrics for high-performance composites, filter media, flame retardant barrier fabrics and heavy-duty membranes are now being coated on Monforts texCoat ranges and finished with the company’s industry-leading Montex stenters.

“Since we acquired the technology that our coating units are based on in 2015, we have made a lot of refinements,” says Hans. “All of these developments are reflected in higher coating accuracy and the resulting quality of the treated fabrics. At the same time, our latest multi-functional coating heads offer an unprecedented range of options, with a wide range of modules available.”

The texCoat user interface is now equipped with the unique Monforts visualisation system and the magnetic doctor blade has greater power reserves. Options include a carbon fibre-reinforced composite coating drum with a more scratch-resistant surface and maximum rigidity and remote control which simplifies exact adjustment for the operator.

Montex stenters in special executions are meanwhile ideal for the drying and finishing of both technical woven fabrics and nonwovens and characterised by high stretching devices in both length and width.

“The European-built Montex range of stenters has earned its leading position in the technical textiles market due to the overall robustness, reliability and economy of these machines,” Hans concludes. “Whatever the intended end-product – and we continue to discover potentially new areas in which technical textiles can be utilised all the time – we have the machine specification and know-how to turn ideas into reality. In India we also benefit from the strong sales and service support of A.T.E. Enterprises.”

Texchtextil India takes place alongside World of Composites at the Bombay Exhibition Centre in Mumbai from November 20-22.

• Forward AM is the company’s new brand name
• Innovative portfolio and services for all AM technologies
• Outstanding scalable applications and industry partnerships
• Presentation of 3D printed footwear

BASF 3D Printing Solutions (B3DPS) will be exhibiting at Formnext 2019, the leading sector show for additive-based manufacturing, with an expanded product range and a new brand presence. Sector specialists are warmly invited to meet B3DPS specialists in person from November 19 through 22 at Booth D21, Hall 12.1 at the Frankfurt Trade Fair. With the introduction of its new Forward AM corporate brand, B3DPS continues to pursue its goal of driving industrial scalability as the next phase of additive-based manufacturing. “Forward” stands for future-oriented, leading-edge materials and technology, while “AM” stands for “additive manufacturing”. The new arrow-symbol brand logo and “Innovating Additive Manufacturing” baseline emphasize the company’s dynamic approach to this exciting industrial manufacturing sector.

Extensive product portfolio with expanded service offer
Under the Forward AM brand the company offers end-to-end materials and service solutions along the entire value chain – from an initial product idea right through to its serial manufacture. Forward AM has the most extensive materials portfolio in the industrial 3D printing market today, encompassing powder bed fusion, advanced plastic and metal filaments, and the latest photopolymers.

Lenzing was awarded for the introduction of the blockchain technology for fiber identification as well as its achievements as a leading company and significant economic engine in the region

On November 4, 2019, Lenzing AG won the “Digital Corona” in Gold. The coveted business prize was awarded for the first time in this category. It is awarded to companies that have dynamically advanced the digitization of business processes, products, services and business models in recent years. At the premiere, Lenzing was delighted to receive the first prize for the introduction of the blockchain technology for fiber identification along the textile value chain.

“Consumers increasingly want to understand the ingredients and suppliers of the products they buy, requesting a new level of transparency and traceability. With the introduction of blockchain technology, Lenzing is pursuing the ambitious goal of creating full transparency across the value chain, driving change in an industry where less than five percent of the top 250 apparel brands can track their garments back to the fiber origin”, Stefan Doboczky, CEO of the Lenzing Group, says. Lenzing enables its customers and partners to identify TENCEL ™ branded fibers across each production and distribution step from fiber-to-retail. The technology also allows consumers to verify the garment composition and the underlying textile supply chain at the point of sale, simply by scanning the barcode with a mobile device. As a result, Lenzing also directly supports the business with its very sustainably produced TENCEL™ lyocell fibers.