From the Sector

Circular fashion and textile technology group Infinited Fiber Company has secured investments totaling 30 million euros in its latest financing round completed on June 30. The round also brought Infinited Fiber Company new investors, including sportswear company adidas, Invest FWD A/S, which is BESTSELLER’s investment arm for sustainable fashion, and investment company Security Trading Oy. Among the existing investors contributing to this round of financing were fashion retailer H&M Group, who was the lead investor, investment company Nidoco AB, and Sateri, the world’s largest viscose producer and a member of the RGE group of companies.

This securement of new funding follows Infinited Fiber Company’s April announcement of plans to build a flagship factory in Finland in response to the strong growth in demand from global fashion and textile brands for its regenerated textile fiber Infinna™. The factory, which will use household textile waste as raw material, is expected to be operational in 2024 and to have an annual production capacity of 30,000 metric tons. The new funding enables Infinited Fiber Company to carry out the work needed to prepare for the flagship factory investment and to increase production at its pilot facilities in the years leading to 2024.

“We are really happy to welcome our new investors and grateful for the continued support from our older investors,” said Infinited Fiber Company co-founder and CEO Petri Alava. “These new investments enable us to proceed at full speed with the pre-engineering, environmental permits, and the recruitment of the skilled professionals needed to take our flagship project forward. We can now also boost production at our pilot facilities so that we can better serve our existing customers and grow our customer-base in preparation for both our flagship factory and for the future licensees of our technology.”

H&M Group is one of Infinited Fiber Company’s earliest investors. They first invested in Infinited Fiber Company in 2019.

H&M Group has also signed a multiyear sales deal with Infinited Fiber Company to secure its access to agreed amounts of Infinna from the planned flagship factory.

New investor BESTSELLER has struck a similar sales deal with Infinited Fiber Company.

In addition to strong interest by global fashion leaders, the technology has significant promise for major textile fiber producers. Allen Zhang, President of Sateri, said: “Sateri is excited to continue to invest in and collaborate with Infinited Fiber Company as part of our long-term commitment towards closed-loop, circular and climate-positive cellulosic fibers. This financing round marks a major milestone for our collaboration in scaling up next-generation fiber solutions.”

Infinited Fiber Company’s flagship plant preparations are also proceeding on other fronts. Several Nordic and international investment banks have given Infinited Fiber Company proposals on the financing options for the investment.

Infinited Fiber Company’s technology turns cellulose-based raw materials, like cotton-rich textile waste, into Infinna, a unique, premium-quality regenerated textile fiber with the natural, soft look and feel of cotton. Infinna is biodegradable and contains no microplastics, and at the end of their life, garments made with it can be recycled in the same process together with other textile waste.

National Council of Textile Organizations (NCTO) President and CEO Kim Glas is testifying on “Supply Chain Resiliency and the Role of Small Manufacturers” before the Small Business Committee’s Subcommittee on Economic Growth, Tax, and Capital Access.
 
In written testimony submitted to the committee, Glas provides an overview of the incredible resiliency of the U.S. textile industry during the COVID-19 pandemic, the impact of the ensuing economic crisis, existing options available to small manufacturers to access capital, and policy recommendations to strengthen the entire industry domestic supply chain.

“One silver lining associated with the immense challenges posed by the COVID-19 crisis is that it afforded the domestic textile industry an opportunity to demonstrate its enormous resiliency, flexibility, and overall value to the U.S. economy,” Glas says in the testimony. “Despite the fact that there was virtually no [full] U.S. production of textile-based PPE prior to the pandemic, the heroic actions of domestic textile manufacturers resulted in the ability to supply homegrown PPE at the height of the greatest healthcare emergency our country has faced in the past 100 years.”

“As we exit the current crisis, rational federal policies are once again needed to ensure a stable overall environment where small businesses can compete and thrive, and targeted initiatives are required to ensure that domestic supply chains for critical materials, such as PPE, exist in the United States,” Glas notes.

Glas details five key policy recommendations supported by 20 trade associations and labor groups, representing the entire domestic supply chain aimed at strengthening the integrated U.S. textile sector:

• Strengthen Buy American procurement rules
• Provide funding assistance for companies to reconstitute domestic supply chains important to U.S. national and healthcare security
• Key contracting reforms
• Streamline the SBA loan application process
• Provide additional funding for workforce training

Please view the full written testimony by NCTO President and CEO Kim Glas here.

With their recently installed high-temperature unidirectional tape line, Japan-based composites manufacturer MaruHachi enables new opportunities for high-end applications in demanding market segments like aerospace, automotive or others outperforming traditional materials based on PP and PA which are already widely available.

In the first phase, MaruHachi will produce up to 40 tons/year and focuses now specifically on high-temperature thermoplastic uni-directional (UD) tapes and multi-layer sheet laminates. The material is based on high-performance fibers like carbon, aramid, glass or natural fibers and the matrix can be high-performance polymers like PPS, PEEK or other higher temperature polymers, which are much tougher than epoxies and easy to recycle. With a width of 500 mm, a specific weight from 60 to 350 g/m2, depending on the chosen material, the lines can operate under temperatures up to 420 degrees Celsius. Working under these extremely high temperatures allows for better material properties of the final application, higher performance, increased resistance and integrated high-performance functionalities e.g. by overmoulding.

Since 2017, MaruHachi Group is active in the European market in cooperation with Dr. Michael Effing,the CEO of AMAC GmbH, who advises and supports the company strategically. The established, family-owned MaruHachi Group has a strong history in automotive and medical textiles and has been active in the innovative composites market for more than 15 years.

Toshi Sugahara, CEO of MaruHachi: “For many years, we have already been cooperating with domestic and international partners on high-demand applications and therefore, MaruHachi decided now to invest over 1 million EUR in this new line in phase 1, including a funding participation from the Japanese government NEDO. New developments in phase 2 will be be undertaken by end of 2021 on the downstream technologies like the automated preforming and consolidation. With our new products, we want to contribute to significant weight reductions of the final products, thus improve energy efficiency while offering a cost-efficient and high-quality solution.”

Dr. Effing, CEO of AMAC GmbH confirms: „The focus on the niche of high-temperature products based on PPS and PEEK allows MaruHachi on very demanding high-end applications such as structural frames on space and aircrafts, aircraft seats or engine components etc. The tapes are fully recyclable and can be processed e.g. with high-speed with laser-based tape placement machines and robots.”

An impairment charge has become necessary based on the current status of the new 5 year plan.

(Market Abuse Regulation N° 596/2014)
•    Impairment loss amounting to €80-100 million in the fourth quarter 2020 in the business unit CFM
•    Restructuring program resolved with savings target of more than €100 million until 2023
•    Guidance 2020 for Group sales and operating recurring Group EBIT confirmed
•    Guidance 2020 for net result reduced to minus €130-150 million

In the current status of the 5 year plan, which is at present under preparation, significant deviations have already become apparent today, particularly in the market segments Automotive, Aerospace and Wind Energy in the business unit Composites – Fibers & Materials (CFM). Partially also due to the pandemic, Automotive and Aerospace is developing slower than anticipated in the last 5 year plan. In contrast, business with Wind Energy is growing much stronger than previously planned. These changes in the product mix lead to lower mid-term earnings at CFM compared to the prior 5 year plan. Following these deviations from the last 5 year plan, an event-driven impairment test was undertaken. This results in a non-cash impairment charge amounting to €80-100 million, which will be recorded in the fourth quarter 2020.

The Board of Management of SGL Carbon SE today also resolved the implementation of a restructuring program, with which the Company is targeting savings of more than €100 million until 2023 (compared to the base year 2019). These savings consist of a planned socially compatible reduction in personnel of more than 500 employees and substantial reduction in indirect spend, particularly in the areas of travel, consulting and external services. Costs of approximately €40 million are anticipated for the implementation of this restructuring program. A little more than half of this is expected to be recorded as expenses in the fourth quarter 2020, while the associated cash outflows are mainly forecasted for 2021.

This requires a partial adjustment of the guidance for 2020. The solid operational development in the third quarter 2020 with Group sales between €220 and €230 million and operating recurring EBIT1 between €13 and €15 million (plus approximately €9 million positive one-time effects) is within the framework of our expectations for the full year 2020. However, the Group net result is likely to develop below the prior year level of minus €90 million and reach approximately between minus €130 and €150 million due to the restructuring provisions as well as the impairment charge (prior guidance: improvement to a negative low double-digit million € amount).

With liquidity of €167 million as of September 30, 2020 (compared to €137 million at year-end 2019) and further cash inflows in the fourth quarter 2020 from successfully implemented additional funding measures, the Company’s position is solid. This liquidity is more than sufficient for the payment of the purchase price for SGL Composites USA in the amount of USD 62 million at the end of 2020 as well as the restructuring-related cash outflows expected mainly in 2021. The Company continues to have access to the revolving credit facility (RCF) in the amount of €175 million, which remains undrawn.

The quarterly statement as of September 30, 2020 will be published on November 12, 2020 as scheduled. Further details on the new 5 year plan as well as the guidance on the fiscal year 2021 will be presented with the publication of the Annual Report 2020 on March 25, 2021.

*The use of KPIs in this notification is aligned to the annual report 2019 and the interim report for the first half year 2020. There were no changes to the scope of consolidation or to valuation methods compared to the previous guidance.

• Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact.
   

Helsinki - Leading chemical binding expert AFFIX Labs has harnessed its global experience in disease prevention to create the first long-lasting surface treatment proven to kill COVID-19. Si-Quat combines a safe and well-established disinfectant and a proprietary chemical binding technique, so that the active ingredient can kill viruses, including SARS-COV-2. Testing at Portugal’s Biochemistry Institute at the University of Lisbon proves that Si-Quat effectively kills the COVID-19 pathogens that it comes into contact with.

“Tragedies have unfolded across the globe, affecting different countries at varying degrees. The second waves of COVID-19 are just appearing on the horizon. This long-lasting surface treatment is a viable, accessible solution across cultures. By killing the COVID-19 pathogen on surfaces before it can infect people, the Si-Quat solution is a game changer. It can provide increased security and peace of mind to your communities, as well as your customers,” says Tom Sam, CEO of AFFIX Labs.

Si-Quat has been tested to kill 99.99% of microbes within minutes, while still being fully safe to touch. Proven to be effective for about a month on frequently touched surfaces, it is the longest lasting anti-viral surface treatment available to reduce the spread of the novel coronavirus. The product is non-corrosive, free from silver salts and heavy metal nanoparticles, and perfectly safe to touch.

Several major agencies around the globe have already accepted quaternary ammonium, the main ingredient in the surface coating, to be an effective surface treatment against the novel coronavirus, including the World Health Organization (WHO), the US Environmental Protection Agency, the American Chemistry Council (ACC) and the European Chemical Agency (ECHA).

Si-Quat was invented in January 2020 by the AFFIX Labs’ Repeltec development team to specifically help combat the COVID-19 outbreak. The product is based on the trusted and safe disinfectant quaternary ammonium, which is chemically bound to align silane quaternary ammonium molecules (silane quats) in a highly effective manner. Positively charged nitrogen particles then actively attract viruses and bacteria, penetrating the membranes and killing them within minutes.

Rigorous testing has shown Si-Quat to adhere to almost any surface, performing as the most durable surface treatment commercially available. Due to its incredibly strong layer, the solution only wears down on surfaces after thousands of touches or multiple cleaning cycles. This means that on heavily used surfaces, such as door handles and counters, Si-Quat will be effective for about a month. On rarely touched surfaces like walls, it has the potential to protect for years. Since the product is incredibly easy to apply, technicians require minimal training and only basic protection. They simply have to brush or spray Si-Quat onto the surface and allow it to dry for 6 hours.

“Other sanitising solutions require reapplication to every surface several times daily, interrupting business operations. This results in additional costs and disruptions at a time when many companies are already struggling,” Sam explains. “By combining proven efficacy, safety and long durability, Si-Quat is emerging as an important weapon in the battle against the spread of COVID-19.”

AFFIX Labs has begun to roll out the distribution of Si-Quat across the globe, with new regions being serviced every week. It is currently looking for distribution partners in local markets.

The project leading to the development of Si-Quat included funding from the European Institute of Innovation and Technology, a body of the European Union, under the Horizon 2020 Framework for Research and Innovation.

Carbon dioxide-based fibre for climate protection and interdisciplinary training with novel Smart Textiles test rig

The Wilhelm-Lorch-Stiftung, based in Frankfurt am Main, Germany, honours a project of the Institut für Textiltechnik of RWTH Aachen University, short ITA, and awards a sponsorship prize to the ITA graduate Ricarda Wissel on 25 June 2020. She is awarded for her outstanding bachelor thesis " Implementation of elastic yarns made from carbon dioxide based thermoplastic polyurethane in socks " with funding for a subject-specific continuation of her education. The ITA receives the project sponsorship prize for the project "Smart Textiles - an interdisciplinary training course to promote young scientists in future technologies", which was submitted to the Wilhelm-Lorch-Stiftung by ITA´s PhD candidate Simon Kammler.

Carbon dioxide-based fibre from industrial waste contributes to climate protection

ITA scientist Dr.-Ing. Pavan Manvi has developed a melt spinning process at ITA for the production of elastic yarn from thermoplastic polyurethane, in which carbon dioxide is used as one of the raw materials. In her bachelor thesis, Ricarda Wissel successfully developed a process chain for the CO2-based yarn in a textile end product for the first time. In cooperation with the company FALKE and Dr Manvi, who supervised Ms. Wissel's work, the yarn was used to produce a sock (see figure "FALKE sock with carbon dioxide filaments").

By reusing carbon dioxide from industrial waste as a raw material for textile and clothing products, the carbon dioxide balance can be improved and thus contributes directly to climate protection. The sponsorship prize of the Wilhelm-Lorch-Stiftung is endowed with 6,000 € for the specialist further training of Ms. Wissel.

Interdisciplinary training with development of a new type of measuring stand for the future-oriented research field "Smart Textiles

The development of textiles with additional digital functions, so-called "Smart Textiles", is considered a future-oriented field of research. In his project submission, ITA´s doctoral candidate Simon Kammler presented a concept for a lecture series on Smart Textiles at ITA and develops a new type of measuring stand for measuring the capacity and conductivity of fibres. The project is funded by the Wilhelm-Lorch-Stiftung with a prize money of 10,000 Euro.

Smart Textiles enable the textile to interact with the environment and the human user. Today they are therefore in demand in many areas of everyday life such as sport, health, living, life and mobility and offer completely new practical solutions. In combination with digital networked services, Smart Textiles promise support and innovation in almost all situations of daily life.

With the conception of a new lecture series, Mr. Simon Kammler is supporting ITA in its goal of providing the best possible training for young scientists. The focus is on imparting far-reaching interdisciplinary skills in order to master the challenges of current fields of research.

Background:

The Wilhelm-Lorch-Stiftung supports particularly talented young people from all areas of the textile industry. Its purpose is the promotion of subject-specific education and further education as well as the promotion of projects at universities, academic schools and vocational schools, which are characterised by the sustainable communication of innovative learning content in science and research. In total, thirteen sponsorship prizes were awarded in 2020. Due to the Corona crisis, the forum of TextilWirtschaft, which is normally the venue for the awards ceremony, unfortunately had to be cancelled in 2020.

Brown Wrote to President Outlining Critical Steps White House can Take Now to Address Shortage of Personal Protective Equipment

 U.S. Sen. Sherrod Brown (D-OH) hosted a news conference call to discuss his plan for addressing the shortage of personal protective equipment (PPE) needed by healthcare workers on the frontline of keeping Americans healthy and safe during the coronavirus pandemic.

This weekend, Brown wrote to President Trump outlining several steps the Administration should take immediately to address the shortage and ramp up manufacturing of these critical medical supplies.

In his plan and in his letter to the President, Brown lists nine steps the Administration could take immediately, including:

1. Designate a government official who can serve as a point person responsible for coordination the acquisition and development of PPE, medical devices, and other supplies necessary to fight the coronavirus pandemic. 
2. Establish a PPE and medical device assessment and database to monitor the supply and anticipated needs for PPE, ventilators, diagnostic test kits, and other needed medical supplies to respond to the coronavirus pandemic. 
3. Publish a list of PPE, medical device, and general medical supply needs to respond to the coronavirus pandemic. 
4. Establish a hotline capable of handling significant call capacity that will provide U.S. producers centralized information about the results of the national assessment and the current need for PPE, devices, and other health care supplies. 
5. Provide immediate funding to manufacturers to purchase equipment, retool machinery, hire additional workers, and cover any other expenses needed to increase production of PPE and necessary medical devices and supplies.
6. Streamline contract and certification procedures to ensure production and delivery of materials are not delayed due to paperwork constraints.
7. Provide critical protections for workers who are making PPE, medical devices, and necessary supplies to receive a waiver from any shelter-in-place requirements to allow workers to volunteer to go to work in these critical industries. 
8. Provide purchase guarantees and delivery assistance of product to the communities and health care facilities that need the products most. 
9. Support companies that have the capacity to sterilize reusable equipment to alleviate the existing PPE shortage. 

In his plan, Brown also pointed out important legislative actions that will help ramp up production of these critical supplies, including expanding the strategic national stockpile authority, substantially increasing Defense Production Act funding and strengthening domestic preferences.

The Mechanical Engineering Industry Association (VDMA) has awarded two prizes to graduates of the Institut für Textiltechnik (ITA) of RWTH Aachen University - the dissertation prize and the creativity prize of the Walter Reiners Foundation of German Textile Machinery 2018. ITA alumnus Dr Benjamin Weise was awarded the dissertation prize for the development of novel fibres for textile charge storage devices. For their work on a guide to 4D product design, Jan Merlin Abram and Aalon Tal (both ITA students) were honoured with the creativity prize. The dissertation prize is endowed with €5,000 whilst the creativity prize contains a one-year scholarship of €250 per month. Peter D. Dornier, President of the Walter Reiners Foundation and Chairman of the Management Board of Lindauer DORNIER, presented the awards on the 18 September 2018 at the 18th Textile Machinery Forum in the Digital Capability Center in Aachen, Germany.

Graphene revolutionizes all-in-one - supercaps, reduction of terahertz radiation and antistatics

In his dissertation "Development of graphene-modified multifilament yarns for the production of textile charge storage devices", laureate Dr Benjamin Weise developed novel fibres made of polyamide and graphene and further processed them into textile surfaces. The newly developed polyamide graphene fibres are featuring a multitude of advantages:

• Due to their high performance in the charge storage area, they are predestined for use in double-layer capacitors, so-called super capacitors, or supercaps in short. Compared to lithium-ion batteries, supercaps offer significantly higher power density and a longer lifetime as no chemical reactions are taking place. towing to the graphene platelets in the filaments, it is now possible for the first time to integrate a charge storage device directly into a textile without having to sew in a rechargeable battery. This new fibre is therefore suitable for prospective use in smart textiles, for instance in a textile defibrillator.
• The new graphene-modified polyamide fibres can attenuate inident terahertz radiation up to 25 % of their original intensity. Terahertz radiation, for example, offers transmission rates of 100 Mbit/sec and is therefore of high interest for high-performance wireless communication. However, the radiation could damage sensible electronics as in aircrafts if this technology will be used widespread. Consequently, the shielding of the radiation is of high importance, e.g. in the form of fibre composite components in the aircraft, which protect the on-board electronics.
• As the fibres are showcasing a dissipative electrical conductivity, personal protective equipment is another prospective field of application.  

The development of a pilot process for graphene-modified fibres and the production of textile demonstrators are novel and disruptive attainments of Dr Weise’s PhD thesis and the reason for the award ceremony to him. Due to its outstanding properties, the European Union is funding research on graphene within the frame of the "Graphene Flagship" with an overall budget of one billion Euro (source: http://graphene-flagship.eu/project/Pages/About-Graphene-Flagship.aspx).

Modular product design of 4D products is now possible in simplified form

How can three-dimensional products change their shape over time and thus become "four-dimensional"? The students Jan Merlin Abram and Aalon Tal provide answers to this question in their project work "Leitfaden zur Auslegung hybrider morphender Textilien am Beispiel eines Scharniers" (Guidelines for the Design of Hybrid Morphing Textiles Using the Example of a Hinge), for which they were awarded the creativity prize. In their work, the students offer a guideline for the development of a four-dimensional textile from the idea to the demonstrator. Four-dimensional textiles, for example, consist of a hybrid material of elastic textile on which three-dimensional structures are printed. The fourth dimension describes the change in shape and/or a property over a defined period of time (= morphing).  This change is caused by external influences such as light and heat.

Every year, the Foundation of the German Textile Machinery awards prizes for the best dissertation, diploma or master's thesis and the creativity prize for the smartest student research project. Further prizes were awarded to Eric Otto, ITM Dresden, and Susanne Fischer, Reutlingen University.

Exhibiting at this week’s Association for Professionals in Infection Control and Epidemiology (APIC) Annual Conference, Hygienically Clean Healthcare certified laundries provided nearly 200 copies of a training video guiding caregivers in improving soiled linen handling performance.

Provided on a flash drive: the 13-minute video (The Six Cs: Handling Soiled Linen in a Healthcare Environment), a quiz to immediately assess viewers’ grasp of the video’s lessons and posters to reinforce these year-round. Distributed since 2016, the video has been hailed for its value in aiding compliance with OSHA universal precautions regarding items saturated with blood, bodily fluids, harmful residue from treatments and other potentially infectious material.

The flash drive offer intrigued infection preventionists (IPs) from a single facility or those responsible for this function throughout health systems, whether acute or outpatient care environments or both. The drive also attracted the attention of other professionals who visited the Hygienically Clean exhibit, such as federal and state health officials and suppliers of products and services to the IP profession.

Distributing the flash drive is a hallmark of the Hygienically Clean program’s philosophy of addressing healthcare providers’ operational needs outside the scope of outsourced laundries’ traditional functions. Certified operators’ certification fees provide funding for creating and distributing the video and other education tools for healthcare facilities.

Visitors to the Minneapolis display who previously received the video vouched for its effectiveness. Certified laundries have individually distributed the flash drive to customers and prospects in addition to  their collective effort to provide them at previous APIC and Association for the Healthcare Environment (AHE) expos.

The video’s easy-to-follow steps improve infection control and patient care and reduce costs by addressing OSHA-required universal precautions. Employees who handle soiled linen (usually nurses and environmental services staff) must assume all human blood and potentially infectious materials they touch are infected, because they can’t be sure which patients are infected or what infections are present.

Adhering to the six Cs (cover, collect, contain, consolidate, clean, cooperate) each day prevents injury and reduces the risk of spreading of infection to co-workers, patients and residents. These positive outcomes are only achieved when workers first protect themselves.

The flash drive is available to all healthcare providers at no cost. It also contains the Hygienically Clean standard and other guidance documents for infection preventionists related to linen and uniforms. Among these documents: Handling Clean Linen in a Healthcare Environment, an 8-page guide to safeguarding through effective transportation, storage and distribution.

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

Among the Aerospace promotions at Hexcel’s booth are carbon-reinforced 3D printed parts, made from Hexcel’s HexAM™ additive manufacturing technology that uses PEKK ultra-high performance polymers. Hexcel acquired this technology from Oxford Performance Materials in December 2017 to provide a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Aircraft engines benefit from a number of Hexcel technologies that will be promoted at JEC 2018, including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.
Another honeycomb innovation from Hexcel is Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs. An example of this technology will be on display at JEC 2018.

Rounding off the aircraft engine exhibits is a CTi fan blade for new generation lightweight turbofan engines from Rolls-Royce, manufactured from Hexcel’s HexPly® M91 high toughness and impact-resistant epoxy prepreg. Hexcel supplies HexPly® M91 as slit tape for the automated lay-up of the complex aerodynamic shape, with a constantly changing thickness across the blade length. The blade which is thinner and lighter than titanium fan blades is currently undergoing flight tests.
Hexcel’s HiTape® and HiMax™ dry carbon reinforcements that were developed for the automated lay-up of preforms for resin-infused aerospace structures will be promoted at the show. Two demonstrator parts, one made with HiMax™ and one with HiTape®, were both infused with HexFlow® RTM6 resin to demonstrate the potential benefits of an integrated design for aircraft skins, spars and stiffeners that meets OEM requirements for production rate increases and cost effectiveness.

Hexcel is also introducing its new range of HiFlow™ advanced liquid resins for aerospace structures manufactured by liquid molding technologies. Based on novel proprietary chemistry, the new resin family will enhance the performance of composites and ease processing when combined with HiTape® and HiMax™ dry carbon reinforcements. HiFlow™ HF610 is the first resin in the range.
Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil last October. Hexcel is relaunching the acquired products under the new HexBond™ brand name at JEC World. This fast-growing range of pastes, liquid shim and film adhesives has a wide spectrum of operating temperatures and is in qualification with a large number of aerospace and industrial OEMs.
In the Planet Aerospace area at JEC, Daher and Hexcel will jointly display an aircraft spar manufactured from HexPly® M56 prepreg. Hexcel’s Neil Parker and Daher R&T Director Dominique Bailly will give a joint presentation focusing on the materials used and the benefits for the finished part. The aircraft spar was designed and manufactured by Daher using Hexcel’s HexPly® M56 prepreg, in slit tape format, that was developed for automated deposition and out-of-autoclave curing. The spar was manufactured using only the vacuum bag process and demonstrates very low porosity levels. It is currently undergoing testing and validation through CORAC funding.

Hexcel’s Automotive promotions at JEC World 2018 include a new prepreg for composite leaf springs, HexPly® M901. In contrast to steel leaf springs used for suspension on vans, trucks and SUVs, newer composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. Hexcel’s HexPly® M901 prepreg raises the bar further, reducing mold cure time below 15 minutes, a 50% reduction compared to standard industrial prepregs. HexPly® M901 provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure. Hexcel’s expertise in manufacturing heavy weight glass UD prepregs, with fiber areal weights of up to 1600gsm, allows the company to offer a highly cost-competitive solution for the rapid manufacture of these safety critical components.

Hexcel is constantly seeking ways to ensure that customers obtain the maximum benefit from composites and has recently acquired state-of-the-art simulation technology that accurately predicts how HiMax™ non-crimp fabrics will drape in a mold. Working in collaboration with Nottingham University Hexcel has created a car seat shell, for which the material selection was optimized using this new drape simulation technology. Visitors to Hexcel’s stand at JEC will see an on-screen demonstration that illustrates how the simulation tool operates, predicting process and performance and ensuring that the optimum fabric architecture is quickly identified, reducing the need for expensive trial programs.
Hexcel’s HexMC®-i 2000 carbon fiber/epoxy molding compound has been successfully used by Audi to manufacture a high-performance engine cross brace. HexMC®-i is a fast curing high-performance molding material, suitable for the series production of complex shaped parts and providing excellent mechanical properties. The Audi cross brace covers the engine, providing torsional stiffness for enhanced drive dynamics.

Hexcel’s product offering for customers in the Marine industry has expanded following the acquisition of Formax in 2016 and Structil in 2017. At JEC World, Hexcel will promote its enhanced portfolio of carbon fibers, prepregs, woven reinforcements and multiaxial fabrics for builders of racing catamarans and luxury yachts.
Marine customers have supplied a number of parts for display to illustrate their expertise in manufacturing composite structures from Hexcel materials. These include part of a Diam 24 yacht mast made by ADH Inotec from Hexcel’s HexPly® M79 fast curing, low temperature cure prepreg. ADH Inotec purchased the prepreg from Composites Distribution, a Hexcel Official Distributor that also supplied HexPly® M9.6 prepreg to Lorima for the Outremer 5X catamaran mast section on display. Part of Lorima’s 42m wing mast for a multihull racing boat made with HexPly® prepreg from Vert-Le-Petit (formerly Structil) will complete the marine display.

Hexcel’s innovations for Wind Energy include Polyspeed® pultruded laminates for load-carrying elements in wind blades. These continuous cross-section profiles, made from a polyurethane matrix reinforced with unidirectional carbon fiber, provide consistently high mechanical properties, including high stiffness, fracture toughness and shear strength, combined with low weight and durability. Visitors to Hexcel’s stand will see a 2m diameter coil of pultruded carbon laminate that contains 255m of material in a single roll. This technology offers an economical way of reinforcing large-scale composite structures such as wind turbine blades. Hexcel will also launch its surface finishing prepreg for wind turbine blades and components. This provides a tough, durable and ready-to-paint blade surface without the use of gel coat and results in faster blade manufacture, saving time in production and reducing material costs. The benefits of the new surfacing prepreg will be demonstrated via a wind blade exhibit that has been given four different treatments across the blade surface. These include a section with gel coat, a section of standard prepreg without gel coat, and a section where a fleece has been added to improve surface quality but still requires preparation before painting due to pin holes. The final section made with new HexPly® XF2P surfacing prepreg has a ready-to-paint surface, straight from the mold, without any requirement for gel coat, fleece or finishing operations.