From the Sector

Reset
120 results
(c) ISKO
10.06.2022

ISKO™ purchased new weaving machines by Itema

With the purchase of the latest technology, iSAVER® by Itema, in weaving machines, ISKO pushes the envelope of technological performance and sustainability, making further progress in product and process efficiency.

This decision is an additional, important asset in ISKO’s journey towards a genuine Responsible Innovation™. It is part of other crucial investments made by the company, aimed at further reducing its environmental impact, among which stand out R-TWO™50+ – a new denim generation made with a minimum of 50% pre- and post-consumer recycled blend – and the Green Machine – a pioneering technology providing a 100% post-consumer recycling solution that fully separates and recycles cotton and polyester blends at scale.

After an intensive process, a selection was made where ISKO focuses on the development of technical solutions that enable greater resource savings and more sustainable production methods, always with the protection of workers at heart.

With the purchase of the latest technology, iSAVER® by Itema, in weaving machines, ISKO pushes the envelope of technological performance and sustainability, making further progress in product and process efficiency.

This decision is an additional, important asset in ISKO’s journey towards a genuine Responsible Innovation™. It is part of other crucial investments made by the company, aimed at further reducing its environmental impact, among which stand out R-TWO™50+ – a new denim generation made with a minimum of 50% pre- and post-consumer recycled blend – and the Green Machine – a pioneering technology providing a 100% post-consumer recycling solution that fully separates and recycles cotton and polyester blends at scale.

After an intensive process, a selection was made where ISKO focuses on the development of technical solutions that enable greater resource savings and more sustainable production methods, always with the protection of workers at heart.

As a result, ISKO’s Headquarters extend the company's long-term relationship with Itema,
strengthening the company’s position as the mill with one of the world’s largest denim capacities. The new rapier machines are enhanced by the iSAVER® technology, a breakthrough mechatronic innovation that eliminates the waste selvedge on the left side of the fabric, allowing for saving in energy and raw materials, cutting in half the cotton waste that typically results from the weft yarn. All types of ISKO’s innovative fabrics, with a multitude of different constructions and fiber mixtures, can now be produced using these advanced weaving technologies, with a special focus given to the R-TWO™ technology in terms of its sustainable credentials.

More information:
Isko Itema weaving machine
Source:

ISKO / Menabò Group srl

Photo: Archroma
09.06.2022

Archroma at Techtextil 2022 with latest innovations and system solutions

Archroma will be at Techtextil 2022 in Frankfurt am Main, Germany, from 21 to 24 June 2022, to launch its latest innovations and system solutions aimed to help textile manufacturers with optimized sustainability, productivity and value creation in their markets.

Archroma will present 9 new solution systems and 3 innovations, and will hold 2 booth events.

3 innovation highlights

  • PFC-free* Smartrepel® Hydro SR, a new solution developed for the repellence of water-based soil;
  • Biocide-free OX20, a new odor-neutralizing technology newly launched by our partner SANITIZED AG;
  • Perapret® AIR, a new mineral finishing technology for air purification is activated by natural and artificial light sources and can be applied on all fabrics

9 new solution systems
Archroma introduced its first ever solution systems at the Techtextil 2019 edition, and since then has developed more than 30 systems for technical textile and nonwoven applications.

Archroma will be at Techtextil 2022 in Frankfurt am Main, Germany, from 21 to 24 June 2022, to launch its latest innovations and system solutions aimed to help textile manufacturers with optimized sustainability, productivity and value creation in their markets.

Archroma will present 9 new solution systems and 3 innovations, and will hold 2 booth events.

3 innovation highlights

  • PFC-free* Smartrepel® Hydro SR, a new solution developed for the repellence of water-based soil;
  • Biocide-free OX20, a new odor-neutralizing technology newly launched by our partner SANITIZED AG;
  • Perapret® AIR, a new mineral finishing technology for air purification is activated by natural and artificial light sources and can be applied on all fabrics

9 new solution systems
Archroma introduced its first ever solution systems at the Techtextil 2019 edition, and since then has developed more than 30 systems for technical textile and nonwoven applications.

  • CLEAN AIR, a mineral air purification system that stays put on all kinds of fabrics and is activated by artificial and natural light, for as long as there is light; ➔ based on the new Perapret® AIR;
  • CONSCIOUSLY DEEP, a metal-free one-step scouring and dyeing system for medium to very dark colored nylons that stay deep and bright day after day, and are good for you and the planet;
  • EARTH SOFT, a biomass-based and vegan softening system that is suitable for all kind of fibers and makes you comfortable in your own skin;
  • NATURE BOUND, a compostable binder system for food filtration materials that protect you and the planet;
  • ODOR CONTROL 2.0, a system for odor-free sportswear where permastink cannot build up on your favorite clothes, that’s applicable on polyester, cotton and nylon; ➔ based on the new OX20;
  • RAG N’ROLL, a compostable binder system for nonwoven cleaning rags, that protect you and the planet;
  • SAFE SEATS NextGen, a PFC-free* and halogen-free* modular surface treatment system for safer and cleaner seating materials, ➔ based on the new Smartrepel® Hydro SR;
  • SWEET DREAMS, a metal and particle free* system that redefines protection for mattress ticking fabrics, with long-lasting hygiene and outstanding softness, that protects you and the environment;
  • TAKE A BREATH, an enhanced filtration system that keeps your air clean and fresh for longer putting health first and your competition behind;

2 booth events
A WORLD WITHOUT ODORS, FIGHT OR FLIGHT?
Innovation highlight: Biocide-free OX20 odor management solution by SANITIZED AG

Speakers:

  • Nuria Estape, Panel Moderator, Head of Marketing & Promotion, Brand & Performance Textile Specialties, Archroma
  • Georg Lang, Head of CC Finishing, Archroma
  • Stefan Müller, Head of BU Textiles Additives Sanitized
  • Yann Ribourdouille , Global registration expert Product Stewardship, Archroma

A WORLD WITHOUT PFC, DREAM OR REALITY?
Innovation highlight: PFC-free* Smartrepel® Hydro SR

Speakers

  • Nuria Estape, Panel Moderator, Head of Marketing & Promotion, Brand & Performance Textile Specialties, Archroma
  • Roland Borufka, Head of Competence Center Repellents, Archroma
  • Wolfgang Knaup, Head of R&D repellents, Archroma
  • Yann Ribourdouille, Global registration expert Product Stewardship, Archroma
Source:

Archroma / EMG

Photo: Texaid
07.06.2022

TEXAID enables Textile-to-Textile Recycling

As a leading company in the collecting, sorting, reselling and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. After two years of development, the company has developed a fabric including 50 % of post-consumer textile waste from used clothing, collected and prepared for recycling by TEXAID.

Today’s linear system of «take – make – waste» needs to change. New textiles are produced, used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID invested in the textile-to-textile recycling and product development.

As a leading company in the collecting, sorting, reselling and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. After two years of development, the company has developed a fabric including 50 % of post-consumer textile waste from used clothing, collected and prepared for recycling by TEXAID.

Today’s linear system of «take – make – waste» needs to change. New textiles are produced, used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID invested in the textile-to-textile recycling and product development.

Collaboration enables recycling
After two years of research, product development, and most important, building partnerships in the value chain, TEXAID has been able to develop a fabric made of 100 % recycled fiber in close collaboration with our value chain partners.

The fabric is a blend of 50 % post-consumer textile waste that TEXAID has collected in Germany and Switzerland. White cotton textiles which cannot be worn, have been sorted out in a sorting facility in Apolda, Germany. The other 50% is made from ocean-bound plastic waste which is plastic with a high risk of entering the ocean which has been saved and recycled by Unifi. The fabric and bag have been produced in Italy. The cotton material has been shredded by Marchi & Fildi in Biella, IT, who then spun the recycled cotton and recycled polyester fibers into a yarn. This yarn has been woven into a fabric by Tessitura Casoni.T.F.C.

Through this proof of concept, it has been showcased that making fabrics of 100 % recycled content and with 50 % of post-consumer textiles is possible. TEXAID is looking for strong industry partners to push high-value textile to textile recycling technologies in joint projects like these.

More information:
Texaid Recycling
Source:

Texaid

(c) ISKO
18.05.2022

ISKO returned to Denim Première Vision showcasing its 2023 Collection Vol.2.

Denim Première Vision marks the denim ingredient brand’s return to the tradeshow scene. Under the spotlight is “Iconic by nature”, ISKO’s show concept illustrates the company’s journey of evolution led by its signature Responsible Innovation™ approach. On this occasion, ISKO launches its 2023 Collection Vol.2 with new technologies, finishes and colors, and expressing the company’s passion for a cleaner and safer planet, laying the new foundations of ISKO’s sustainable fashion revolution.

The entire 2023 Collection Vol.2 contains recycled materials, and the majority consists of R-TWO™50+ fabrics made with a minimum of 50% recycled fibers, entirely GRS certified, resulting in less use of natural resources and a reduced carbon and water footprint of up to 45% and 65% respectively. An important and responsible development of this collection is that it features denim containing recycled and/or regenerated fibers, through unique fiber technology significantly saving on resources and energy while allowing for controlled traceability along the supply chain.

Denim Première Vision marks the denim ingredient brand’s return to the tradeshow scene. Under the spotlight is “Iconic by nature”, ISKO’s show concept illustrates the company’s journey of evolution led by its signature Responsible Innovation™ approach. On this occasion, ISKO launches its 2023 Collection Vol.2 with new technologies, finishes and colors, and expressing the company’s passion for a cleaner and safer planet, laying the new foundations of ISKO’s sustainable fashion revolution.

The entire 2023 Collection Vol.2 contains recycled materials, and the majority consists of R-TWO™50+ fabrics made with a minimum of 50% recycled fibers, entirely GRS certified, resulting in less use of natural resources and a reduced carbon and water footprint of up to 45% and 65% respectively. An important and responsible development of this collection is that it features denim containing recycled and/or regenerated fibers, through unique fiber technology significantly saving on resources and energy while allowing for controlled traceability along the supply chain.

The new collection features comfortable ISKO Reform™ Xp 100, allowing for a flattering fit and enhanced shape retention; ISKO Reform™ Hp, characterized by incredible holding power, granting a more streamlined and slimmer appearance; ISKO Blue Skin™, a stretch technology that works 4-ways to respond to the body’s movement like a second skin; ISKO Pop™, a patented concept that starts from the yarn, developed to give a touch of glamour with a soft cotton hand feel. Colors are key in the new collection too, with an important aspect regarding the use of mineral colors, natural dyestuffs.

Source:

ISKO / Menabò Group srl

(c) adidas AG
10.05.2022

adidas and Gucci showcase their collection

Designed by Creative Director Alessandro Michele, adidas x Gucci merges the emblems of the House with those of the iconic sportswear brand. The collection expands on the sartorial streetwear creations that debuted on the runway with a spectrum of sport-inspired pieces, distinguished by the same kaleidoscopic aesthetics of the show.

To present the selection, Alessandro Michele envisioned a series of images inspired by archival catalogs as a cast of characters strikes dynamic poses against brightly colored backdrops alongside sporty props, captured by photographer Carlijn Jacobs.

Designed by Creative Director Alessandro Michele, adidas x Gucci merges the emblems of the House with those of the iconic sportswear brand. The collection expands on the sartorial streetwear creations that debuted on the runway with a spectrum of sport-inspired pieces, distinguished by the same kaleidoscopic aesthetics of the show.

To present the selection, Alessandro Michele envisioned a series of images inspired by archival catalogs as a cast of characters strikes dynamic poses against brightly colored backdrops alongside sporty props, captured by photographer Carlijn Jacobs.

With the heritage of both brands encoded in a trio of lines, a fixation on stripes plays out across ready-to-wear pieces that echo the silhouettes of athletic staples and leisurewear. Track pants feature the white Three Stripes of adidas on one leg, while the other is defined by the red and green Web of Gucci. Energetic prints portray how motifs like the adidas Trefoil and GG monogram find synergy to amplify two legacies. Conventionally formal pieces like leather heels, suede loafers, and silk scarves enter hybridized territory as well, as they are marked with casual codes. Similarly, retro aesthetics become intrinsically contemporary as they proclaim there are no rules when it comes to dressing up.

Reflecting a shared commitment to innovation, progress, sustainability goals and collective action, the collection features multiple pieces crafted with future-conscious material fabrications including polyester, cotton and viscose.

More information:
adidas Gucci Sportswear
Source:

adidas AG

(c) SANITIZED AG
03.05.2022

SANITIZED AG launches biocide-free product for odor-free textiles

SANITIZED AG, a specialist for hygiene function in textiles, is expanding its Sanitized® Odorex™ portfolio for odorneutralizing technologies. The new OX20 product is usable on cotton, viscose, or synthetic fibers. It does not contain any biocides, it is highly wash-resistant, and it can be combined well with other effects.

Sanitized® Odorex™ is the product of several years of experience with environmentally friendly textile treatments. SANITIZED focuses heavily on the causes of, the production of, and the fighting of unpleasant sweat odor in textiles. The basis for the newly introduced biocide-free OX20 product is a metal-free polymer that neutralizes odors. It meets market requirements regarding wash-resistance with excellent results after up to 50 household washes.

SANITIZED AG, a specialist for hygiene function in textiles, is expanding its Sanitized® Odorex™ portfolio for odorneutralizing technologies. The new OX20 product is usable on cotton, viscose, or synthetic fibers. It does not contain any biocides, it is highly wash-resistant, and it can be combined well with other effects.

Sanitized® Odorex™ is the product of several years of experience with environmentally friendly textile treatments. SANITIZED focuses heavily on the causes of, the production of, and the fighting of unpleasant sweat odor in textiles. The basis for the newly introduced biocide-free OX20 product is a metal-free polymer that neutralizes odors. It meets market requirements regarding wash-resistance with excellent results after up to 50 household washes.

Versatile and highly cost-efficient
The new product can be applied in extraction, pad, and spray. It can be used on all common substrates and is compatible with other textile effects. These properties increase the flexibility and efficiency during product design, and they reduce production costs. As one of the first technologies worldwide, OX20 can be applied to synthetics in the dye bath.

Feel and wearing comfort
Binders and particle systems negatively affect the textile’s feel and moisture management. OX20 is a particle-free product with a long-lasting effect that does not change how the textile feels, nor does it affect the textile’s moisture management.

Source:

SANITIZED AG

28.04.2022

ECOSENSOR™ by Asahi Kasei Advance at Performance Days

ECOSENSOR™ by Asahi Kasei Advance presents its SS 2023 collection, made of high-tech fabrics implementing new-generation values, with the aim of keeping nature, body and mind in harmony at Performance Days.

ECOSENSOR™ presents 40 new references that meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™ stands out as a unique eco-high-tech performance proposition in its market. The collection covers the different market applications with 7 items for INNERWEAR, 2 for OUTERWEAR, 17 for SPORT KNIT and 14 for SPORT WOVEN.

ECOSENSOR™ by Asahi Kasei Advance presents its SS 2023 collection, made of high-tech fabrics implementing new-generation values, with the aim of keeping nature, body and mind in harmony at Performance Days.

ECOSENSOR™ presents 40 new references that meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™ stands out as a unique eco-high-tech performance proposition in its market. The collection covers the different market applications with 7 items for INNERWEAR, 2 for OUTERWEAR, 17 for SPORT KNIT and 14 for SPORT WOVEN.

All of ECOSENSOR™ fabrics are made with sustainable materials which are certified by internatinal certification such as GRS, RCS or self-certification by each yarn supplier, through a traceable and transparent production process and supply chain.
100% of the stretch articles (representing 35% of the collection) are made with ROICA™ EF by Asahi Kasei, the recycled stretch yarn made from pre-consumer materials.
 
The main fibers are GRS certified recycled polyester and recycled polyamide, but the collection also features some blends, such as in Bemberg™, the high-tech yarn born from the transformation of cotton linters through a circular, transparent and traceable process with a precious hand, optimal moisture management characteristics,  whose end of life guarantees its biodegradability.
Even the dyeing and finishing phases - key moments for performancewear - have been certified by international labels such as bluesign® or OEKO-TEX® Standard 100.

Source:

Asahi Kasei / C.L.A.S.S.

22.04.2022

Cone Denim launches U.S. Grown Hemp denim collection with BastCore

Cone Denim®, a leader in denim authenticity and sustainable innovation, launches a new U.S. grown hemp denim collection in collaboration with expert hemp processing innovator, BastCore. Cone is excited to expand its sustainable denim offerings and increase its support of the American agriculture industry, featuring denim made with Alabama hemp and U.S. cotton and dyed with natural indigo grown in Tennessee.

Cone Denim is honored to partner with BastCore, a team that aligns with Cone’s values and its commitment to innovation, quality, sustainability, and traceability. The pioneers at BastCore have created patent-pending technology and a proprietary process that produces clean, mechanically processed, OEKO-TEX® STANDARD 100 certified and USDA bio-preferred hemp fiber out of its operation in Montgomery, Alabama.

Cone Denim®, a leader in denim authenticity and sustainable innovation, launches a new U.S. grown hemp denim collection in collaboration with expert hemp processing innovator, BastCore. Cone is excited to expand its sustainable denim offerings and increase its support of the American agriculture industry, featuring denim made with Alabama hemp and U.S. cotton and dyed with natural indigo grown in Tennessee.

Cone Denim is honored to partner with BastCore, a team that aligns with Cone’s values and its commitment to innovation, quality, sustainability, and traceability. The pioneers at BastCore have created patent-pending technology and a proprietary process that produces clean, mechanically processed, OEKO-TEX® STANDARD 100 certified and USDA bio-preferred hemp fiber out of its operation in Montgomery, Alabama.

Cone’s U.S. Hemp Collection includes a range of fabrics featuring classic 3×1 and comfort stretch to modern workwear constructions. The collection further expands upon Cone’s sustainability and traceability practices, driving the future of the industry. The proximity of the hemp, indigo, and cotton crops in the U.S. to the company’s mills in Mexico is also key in creating the smallest environmental impact and footprint possible.

Hemp offers many key benefits in creating the next level of sustainable denim:

  • More than 50% water savings occur, compared to cotton
  • No chemicals, wet processing, pesticides, or herbicides are used
  • Hemp grows in a variety of soils with excellent biodegradability, is antimicrobial, has high tensile strength, moisture regain content, and tenacity
  • Hemp and natural indigo crops have high rates of carbon sequestration, which ultimately benefits the environment and improves the soil’s health for other crops (climate positive)
Source:

Cone Denim

22.04.2022

Haelixa marks and traces sustainable cotton from Costach and Creditex in Peru

Under the United Nations Economic Commission for Europe (UNECE) initiative to enhance transparency and traceability in the garment and footwear industry, Haelixa realizes a pilot project with Costach Cooperative and Peruvian textile company Creditex to give sustainable rural cotton producers in Peru more visibility in the value chain.

Under the United Nations Economic Commission for Europe (UNECE) initiative to enhance transparency and traceability in the garment and footwear industry, Haelixa realizes a pilot project with Costach Cooperative and Peruvian textile company Creditex to give sustainable rural cotton producers in Peru more visibility in the value chain.

In 2019, UNECE and United Nations Centre for Trade Facilitation and Electronic Business (UN/CEFACT) have set up an initiative to drive transparency and traceability for sustainable value chains in the garment and footwear industry. The initiative is jointly implemented with the International Trade Centre (ITC) with financial support by the European Union. Haelixa is proud to be part of the group of experts that develops policy recommendations, traceability standards, and conducts projects to set traceability benchmarks. With the support of the +Cotton Project, implemented by the Food and Agriculture Organization of the United Nations (FAO) and the Brazilian Cooperation Agency (ABC) a pilot is being realized in this context to mark and trace the finest Pima cotton for Creditex directly at the gin in Piura, Peru. Haelixa’s DNA marker connects the actual lint cotton to the entry on a blockchain system provided by UNECE. The Haelixa technology ensures that the information about the product’s origin and the journey of the product along the value chain is always safely embedded into the product itself. The marked cotton will be used to make exclusive pajamas sets for Cat´s Pajamas. DNA traceability will enable the verification of the premium origin of Peruvian Pima cotton in the final garment produced using sustainable practices by family farmers associated with the Costach cooperative.

Costach is the main cooperative of cotton farmers in Peru. The cooperative consists of 5,200 family farmers in the Piura region, producing mostly extra-long fiber of Pima Cotton. Since 2017, the +Cotton project has been supporting the farmers with training on sustainable practices and has been providing technical assistance for improved markets access.

Creditex is vertically integrated from cotton ginning to fine thread, up to the production of high quality apparel for international premium brands. The company takes social responsibility and environmental stewardship very seriously and therefore makes a strong partner for this project, empowering the cotton family farmers that hold the majority of cotton production in Peru.

Source:

Haelixa Ltd

(c) C.L.A.S.S.
07.04.2022

Bemberg™ x Payal Pratap collaboration with colourful prints at FDCI X Lakmé Fashion Week

Through the collaboration Payal Pratap and Bemberg™ by Asahi Kasei show a new way of making fashion, based on merging craft & tech, cutting-edge materials and deeply rooted optimism in troubled times.

With a strong focus on prints, the designer, Payal Pratap, has worked on hand-painted artworks which have then been digitized. The designs capture detailed elements and a three-dimensional depth and texture from the age-old crafts of Batik, plus powerful imagery and minute detailing from the ancient craft of Chintz printing. Batik was named after the Javanese words “Amba” which means to write and “Titik”, which translates to a dot or a point, while Chintz comes from the Hindi word “Cheent”, meaning spotted or speckled.  Both these techniques and crafts have been used in a contemporary context while creating the art works.

Through the collaboration Payal Pratap and Bemberg™ by Asahi Kasei show a new way of making fashion, based on merging craft & tech, cutting-edge materials and deeply rooted optimism in troubled times.

With a strong focus on prints, the designer, Payal Pratap, has worked on hand-painted artworks which have then been digitized. The designs capture detailed elements and a three-dimensional depth and texture from the age-old crafts of Batik, plus powerful imagery and minute detailing from the ancient craft of Chintz printing. Batik was named after the Javanese words “Amba” which means to write and “Titik”, which translates to a dot or a point, while Chintz comes from the Hindi word “Cheent”, meaning spotted or speckled.  Both these techniques and crafts have been used in a contemporary context while creating the art works.

The prints encompass flora and fauna, bringing nature from the outside to the inside through the use of extensive flower, leaf, tree, vine and bird motifs, as an ode to sustainability. Placement prints have been engineered to make tailored jackets and structured pieces. A timeless collection comprising experimental pieces that blend the far east with India. A collection signaling holiday with a burst of colour. Bemberg™ in various avatars ranging from satins, muslins, mulmul, and silk blends have been used to create a collection with fluid drapes as well as structure.

The fabric takes printing and colour beautifully and has a slight sheen and glazed feel which resonates with chintz. The colour palette ranges from indigos, browns, rust, to burgundy brick and gold. Furthermore, Bemberg™ is an inherently sustainable ingredient, since it is made with cotton linters, pre-consumer materials derived from the cotton oil industry, and converted through a traceable and transparent closed loop process. Coming from nature and going back towards nature, the Bemberg™ fiber is also biodegradable and compostable.

Source:

Asahi Kasei / C.L.A.S.S.

(c) UNCG
07.04.2022

Archroma partners with University of North Carolina Greensboro on color expert education

Archroma, a leader in specialty chemicals towards sustainable solutions, has announced the launch of a collaboration with the University of North Carolina Greensboro (UNCG) and its Consumer, Apparel, and Retail Studies (CARS) department, aiming to further the education of its students in the area of color management expertise.

As per the agreement, Archroma will donate its color management tools for their design projects, gaining hands-on expertise that equips them for successful careers in the fashion and textiles industries.

The students will have access to a complete set of the ready-to-use color library developed by Archroma for cotton and polyester. The library, well known among fashion designers and stylists as the Color Atlas by Archroma®, which was launched in 2016 to provide off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Today, the Color Atlas contains 4’320 colors applicable on cotton poplin, almost the double compared to similar tools available to textile and fashion specialists, and 1,440 colors on polyester.

Archroma, a leader in specialty chemicals towards sustainable solutions, has announced the launch of a collaboration with the University of North Carolina Greensboro (UNCG) and its Consumer, Apparel, and Retail Studies (CARS) department, aiming to further the education of its students in the area of color management expertise.

As per the agreement, Archroma will donate its color management tools for their design projects, gaining hands-on expertise that equips them for successful careers in the fashion and textiles industries.

The students will have access to a complete set of the ready-to-use color library developed by Archroma for cotton and polyester. The library, well known among fashion designers and stylists as the Color Atlas by Archroma®, which was launched in 2016 to provide off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Today, the Color Atlas contains 4’320 colors applicable on cotton poplin, almost the double compared to similar tools available to textile and fashion specialists, and 1,440 colors on polyester.

Beside the physical Color Atlas library, the students in the CARS program will also have access to the full digital files for use in the industry-leading 3D fashion design and development software Browzwear VSticher.

The students will be able to use the Color Atlas books and the digital data as a color selection resources to use in a variety projects and assignments.

Source:

Archroma / EMG

30.03.2022

ISKO™ signs Dutch Denim Deal

ISKO has signed the Dutch Denim Deal for circular denim. The Denim Deal, a public-private initiative, was launched by the Dutch government following the EU Green Deal and the Circular Action Plan and includes agreements to make the denim textile chain more circular. In the deal, more than 40 parties, such as Scotch & Soda, PVH and Soorty, are working together to improve post-consumer textiles in the denim industry and make fiber recycling the new norm. The signatories cover a wide range of manufacturing companies, brands and stores, collectors, sorters, cutters, and weavers.

The main objective is to collectively produce a total of 3 million jeans with (a minimum of 20%) post-consumer recycled cotton (PCR) by the end of 2023. In addition, all parties have agreed that they will work together towards the standard of at least 5% recycled textiles in all denim garments as quickly as possible. The Denim Deal is also an opportunity to set up a 'reverse supply chain' for recycled cotton and create a systemic change to close the denim cycle.

ISKO has signed the Dutch Denim Deal for circular denim. The Denim Deal, a public-private initiative, was launched by the Dutch government following the EU Green Deal and the Circular Action Plan and includes agreements to make the denim textile chain more circular. In the deal, more than 40 parties, such as Scotch & Soda, PVH and Soorty, are working together to improve post-consumer textiles in the denim industry and make fiber recycling the new norm. The signatories cover a wide range of manufacturing companies, brands and stores, collectors, sorters, cutters, and weavers.

The main objective is to collectively produce a total of 3 million jeans with (a minimum of 20%) post-consumer recycled cotton (PCR) by the end of 2023. In addition, all parties have agreed that they will work together towards the standard of at least 5% recycled textiles in all denim garments as quickly as possible. The Denim Deal is also an opportunity to set up a 'reverse supply chain' for recycled cotton and create a systemic change to close the denim cycle.

Although the denim industry still has a negative image due to its high carbon footprint, in recent years many good steps have been taken in the field of recycling. But these steps are on a small scale, limiting the overall impact.
"The Dutch Denim Deal fits perfectly into ISKO's circular strategy," says Marc Lensen, ISKO Head of Global Communication. "Our scale and knowledge of sustainable technological solutions will increase the overall impact and accelerate circularity in the denim chain.”

Source:

ISKO / Menabò Group

TEXHIBITION Istanbul Fabric and Textil Accessories Fair
Texhibition 2022
30.03.2022

TEXHIBITION Istanbul Fabric and Textil Accessories Fair

  • March 16-18, 2022, Istanbul Expo Center
  • Successful start of Texhibition, Istanbul Fabric and Textile Accessories Fair with over 10,000 visitors from 63 countries
  • More than 160 exhibitors presented fabrics, yarns and accessories on approx. 5,000 square meters in the Istanbul Expo Center
  • Intensive order activity in a professional trade fair atmosphere of over 1billion US$
  • The organizer's objective: to double the area and number of exhibitors for the second event in September

With over 10,000 visitors, the premiere event of Texhibition Istanbul Fabric and Textile Accessories Fair, organized by the Istanbul Textile and Raw Materials Exporters' Association (ITHIB) and the Istanbul Chamber of Commerce (ITO) from March 16th to 18th, 2022 has successfully started.

  • March 16-18, 2022, Istanbul Expo Center
  • Successful start of Texhibition, Istanbul Fabric and Textile Accessories Fair with over 10,000 visitors from 63 countries
  • More than 160 exhibitors presented fabrics, yarns and accessories on approx. 5,000 square meters in the Istanbul Expo Center
  • Intensive order activity in a professional trade fair atmosphere of over 1billion US$
  • The organizer's objective: to double the area and number of exhibitors for the second event in September

With over 10,000 visitors, the premiere event of Texhibition Istanbul Fabric and Textile Accessories Fair, organized by the Istanbul Textile and Raw Materials Exporters' Association (ITHIB) and the Istanbul Chamber of Commerce (ITO) from March 16th to 18th, 2022 has successfully started.

İTHİB President Ahmet Öksüz: "Our exhibition platforms Texhibition Istanbul Fabric and Textile Accessories Fair and IFCO, Istanbul Fashion Connection, which was launched by our sister association IHKIB in February, play an important role in making Istanbul the fashion center of the Turkish textile and clothing industry. For the follow-up event to Texhibition in September this year, we expect the number of exhibitors and space to double."

The consistently positive feedback from the exhibitors underscores this expectation, as does the great interest shown by international visitors, including those from Denmark, Germany, France, Italy, the Netherlands and the UK.

The Turkish textile industry started with an export target of US$ 15 billion in 2022. The exhibition organizers assume that their platforms will contribute US$ 1 billion. Turkey is one of the most important procurement markets for the European textile industry and is becoming even more important in the course of the global supply chain problem and is now one of the top 3 most interesting procurement locations with its low prices, good quality products, reliable suppliers and short delivery times.

Exhibitors
On offer were high-quality and innovative fabrics from the weaving sector, including Kipaş Textiles, BTD Textile, Özdoku, Bossa and Yünsa; knitters like Gülle, Saka, Örkumod or İskur showed their current collections; yarn market leaders such as Korteks, Tepa and Gama were present, as were Şimşek Ege, EMR Zippers, Çağ-Tek and Öz-El Lastik for the accessories sector. A total of 166 exhibiting companies presented themselves in clearly structured segments in a professional trade fair atmosphere.

Frame program
In the Texhibition Forum, experts discussed the topics Sustainability, New Trends, Supply Chain and GMO-Free Cotton giving an outlook on the upcoming trends and developments in the Turkish textile industry. All events were heavily frequented by visitors.

Next Texhibition September 21-23, 2022

(c) adidas
25.02.2022

adidas unveils its first product with Spinnova

  • The adidas TERREX HS1 is the first product created in partnership with textile material company, Spinnova
  • Part of the hoodie’s fabric is made from wood-based fibres
  • The adidas TERREX HS1 is a step on adidas’ journey to create nine out of 10 articles with a more sustainable technology, materials, design or manufacturing method by 2025

Eight months after adidas announced its partnership with Finnish textile material company Spinnova, the brand has unveiled its first product made in part with Spinnova fibres.

Composed of a minimum of 25% wood-based fibres and 75% organic cotton, the adidas TERREX HS1 is a mid-layer for hikers that sees adidas exploring a more sustainable textile solution.

  • The adidas TERREX HS1 is the first product created in partnership with textile material company, Spinnova
  • Part of the hoodie’s fabric is made from wood-based fibres
  • The adidas TERREX HS1 is a step on adidas’ journey to create nine out of 10 articles with a more sustainable technology, materials, design or manufacturing method by 2025

Eight months after adidas announced its partnership with Finnish textile material company Spinnova, the brand has unveiled its first product made in part with Spinnova fibres.

Composed of a minimum of 25% wood-based fibres and 75% organic cotton, the adidas TERREX HS1 is a mid-layer for hikers that sees adidas exploring a more sustainable textile solution.

adidas is committed to helping end plastic waste via a three-loop strategy that consists of using recycled materials, materials that can be remade into entirely new products, and, in the case of Made with Nature, products created in part with natural ingredients, such as the adidas TERREX HS1. Its outdoor brand, adidas TERREX , is leading the innovation of technical materials with the aim of helping drive better product solutions for adventurers in nature while ensuring there is no compromise on style or performance .

By 2025, nine out of 10 adidas articles will carry a more sustainable technology, material, design, or method of manufacturing and adidas’ partnership with Spinnova is a major part of this journey.

(c) Flocus ™
22.02.2022

Flocus ™ kapok nonwovens and fabrics for the leather goods and footwear

Flocus ™, the trademark for kapok fibers, offers a range of kapok textile materials such as fibers, yarns, textiles and nonwovens. The company presents the most performing and zero carbon footprint solutions based on Flocus™ kapok available for the leather goods industry, a sector that is making an important transition to sustainability in terms of processing and raw materials.

As for nonwoven, some of their most used products in the world of leatherware are:

Flocus ™, the trademark for kapok fibers, offers a range of kapok textile materials such as fibers, yarns, textiles and nonwovens. The company presents the most performing and zero carbon footprint solutions based on Flocus™ kapok available for the leather goods industry, a sector that is making an important transition to sustainability in terms of processing and raw materials.

As for nonwoven, some of their most used products in the world of leatherware are:

  • Maliwatt - 50% Kapok, 50% PLA (based on corn), a 100% biodegradable non-woven which can be used in the shoe sole. Maliwatt can be thermopressed/heat press and turned into a paper/cardboard type and lightweight structure. It is the perfect material for sneakers, casual and active shoes thanks to its quick dry, antibacterial, hydrophobic, hypoallergenic, Insulation properties. Other frequent applications are in the field of automotive, construction and car panels, sound absorption and acoustics panels and geo textiles.
  • HDE /Hydroentanglement - 50% Kapok, 50% Organic cotton. It is a 100% natural and biodegradable material that can be used in the shoe production as a sole, intersole or as a padding for shoes and bags. Thanks to its termoregulating, lightweight, hypoallergenic, thermoconductivity, insulation, soft touch, hydrophobic, anti-moth anti mite properties, it is used for a large range of applications. It is popular in the apparel world as a cruelty free filling for winter jackets, replacing duck down, and in the home industry ad a stuffing for mattresses, duvets, furniture, sleeping bags.

The offer for the leather goods industry includes also Flocus™ kapok-based fabrics in different blends and weights: linings, coatings, fabric inserts, accessories, components rich in performance and style. For example, kapok and organic cotton with GOTS certification, kapok with Tencel and recycled polyester (Repreve), kapok with linen, organic cotton and a small percentage of Spandex.

These materials were presented at the September 2021 edition of Lineapelle in the exhibition "A New point of materials", dedicated to eco-responsible innovations in terms of technologies, applications, materials and machines.

Source:

Flocus

Photo: ANDRITZ
22.02.2022

ANDRITZ at Inlegmash 2022 in Russia

ANDRITZ will be presenting its innovative solutions for nonwovens production and textile manufacturing at INLEGMASH 2022 in Moscow, Russia, from March 14 to 17.

AIRLAY TECHNOLOGY
Protecting the environment and conserving natural resources require new technologies. In the textile-related industries, the current challenge is to develop industrially and economically viable solutions to use eco-friendly fibers in nonwovens. ANDRITZ focuses on the airlay nonwoven application for hemp fibers (used in mattress production, insulation, ...) and also geotextile end uses.

ANDRITZ will be presenting its innovative solutions for nonwovens production and textile manufacturing at INLEGMASH 2022 in Moscow, Russia, from March 14 to 17.

AIRLAY TECHNOLOGY
Protecting the environment and conserving natural resources require new technologies. In the textile-related industries, the current challenge is to develop industrially and economically viable solutions to use eco-friendly fibers in nonwovens. ANDRITZ focuses on the airlay nonwoven application for hemp fibers (used in mattress production, insulation, ...) and also geotextile end uses.

TEXTILE RECYCLING TECHNOLOGIES
ANDRITZ Laroche is a leading supplier of fiber processing technologies such as opening, blending, and dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses. ANDRITZ will present recycling technologies for end-of-life textile products that can be used in multiple applications, such as automotive, insulation, mattresses, and furniture felts.

Customer awareness and regulations are pushing apparel brands to recycle their textile waste and use the recycled textile fibers in their own products. To support ANDRITZ customers, a team with process know-how is available to conduct customized trials in our advanced technical center located at the ANDRITZ Laroche facilities in Cours, France.

BAST FIBERS
For the demanding Russian market for technologies based on bast fibers, ANDRITZ will present innovative products and the valorization of bast fibers, in particular hemp.
ANDRITZ Laroche is a player in the textile waste recycling sector, with airlay nonwoven technologies but also bast fiber decortication and cottonizing lines.

These eco-friendly fibers are used to spin yarn mixed with cotton, saving cotton as raw material, which reduces the consumption of water, pesticides applied in its cultivation and chemicals used during the dyeing and finishing processes.

More information:
Andritz Inlegmash nonwovens Recycling
Source:

ANDRITZ AG

(c) DUARTE / C.L.A.S.S.
22.02.2022

C.L.A.S.S.: DUARTE returns to Milan Fashion Week with its “Eco-Street Dance” collection

The 2021 C.L.A.S.S. Icon Award Portuguese brand Duarte is ready to presents its Fall/Winter 2022/23 collection developed in collaboration with C.L.A.S.S. Eco Hub during Milan Fashion Week. With the support of WHITE, Duarte’s creations will be featured as a special project at WSM (WHITE Sustainable Milano) platform space inside “Unveiling the fashion Backstage”, a docu-event focusing on an immersive journey into the amazing world of premium and smart supply chains that make innovative and responsible fashion wardrobes a reality.

For its second collection Duarte still counts on C.L.A.S.S. support in sourcing materials and communication activities as part of the Icon Award yearly program. The streetwear designer Ana Duarte, with the help of the Milanese hub, is back with a renewed collection that counts 40 pieces continuing the concept and the story behind the previous World Keeper: the irresistible superhero Tadao - Ana Duarte’s dog – fighting against the environmental issues created by mankind and personified as Smog Man (air pollution), Fire Man (climate change), Deforestation Man (forests destruction) and Wave Man (water overconsumption).

The 2021 C.L.A.S.S. Icon Award Portuguese brand Duarte is ready to presents its Fall/Winter 2022/23 collection developed in collaboration with C.L.A.S.S. Eco Hub during Milan Fashion Week. With the support of WHITE, Duarte’s creations will be featured as a special project at WSM (WHITE Sustainable Milano) platform space inside “Unveiling the fashion Backstage”, a docu-event focusing on an immersive journey into the amazing world of premium and smart supply chains that make innovative and responsible fashion wardrobes a reality.

For its second collection Duarte still counts on C.L.A.S.S. support in sourcing materials and communication activities as part of the Icon Award yearly program. The streetwear designer Ana Duarte, with the help of the Milanese hub, is back with a renewed collection that counts 40 pieces continuing the concept and the story behind the previous World Keeper: the irresistible superhero Tadao - Ana Duarte’s dog – fighting against the environmental issues created by mankind and personified as Smog Man (air pollution), Fire Man (climate change), Deforestation Man (forests destruction) and Wave Man (water overconsumption).

This time the inspiration is also Street Dance drawn directly from the city streets, with majorly unisex pieces (apart from some small specific details linked to sizes or ergonomics) and materials that both respect the planet and keep you warm. The prints drawn from ripped posters giving birth to a sort of new style named “Eco-Street Dance”.

The collection presents a selection of urban pieces for everyday superheroes, fighting against environmental issues - with a holistic approach to sustainability values thanks to the synergy with C.L.A.S.S. and its Back in the Loop area: a section dedicated to alternative and sustainable sourcing against the massive amount of materials and textiles produced that are not used and discarded by the fashion system. This is mostly powered by MAEBA International - and its ReLiveTex® fabrics - leader in selecting and repurposing premium Italian fabrics with exceptional 60 years of expertise in collecting high-quality materials from leading brands and textile manufacturers, and one of the first companies at an international level to be accredited for the UNI EN ISO 14021 certification which grants the traceability of the collected materials.

The linings complete the full sustainable picture, thanks to Bemberg™ by Asahi Kasei fabrics by Gianni Crespi Foderami. Bemberg™ is a new generation material made from the smart-tech transformation of cotton linter pre-consumer material, converted through a traceable and transparent closed loop process.

Trützschler Nonwovens auf der IDEA (c) Trützschler Nonwovens & Man-Made Fibers GmbH
A Carded/Pulp (CP) line for biodegradable composite nonwovens from pulp and viscose fibers
21.02.2022

Trützschler Nonwovens at IDEA

IDEA, the North American nonwovens show, will take place in Miami from March 28th to 31st. Trützschler’s booth focuses on the needs of the American market. It's about local service, the efficient production of sustainable nonwovens and the digital support of production processes.

Tomorrow’s products are sustainable
In addition to the in-depth know-how, Trützschler Nonwovens has a broad portfolio of line concepts for the production of sustainable, biodegradable nonwovens. Cotton is an important raw material for American producers, which is why Trützschler is showing solutions for processing raw cotton, comber noils and blends of viscose and cotton. Another focus is on the Voith/Trützschler concepts for wet-laid, hydroentangled WLS and CP nonwovens. Nonwovens made from viscose fibers and NBSK pulp, the raw material for the paper industry, not only offer a good cost/performance ratio, but also a small CO2 footprint.

IDEA, the North American nonwovens show, will take place in Miami from March 28th to 31st. Trützschler’s booth focuses on the needs of the American market. It's about local service, the efficient production of sustainable nonwovens and the digital support of production processes.

Tomorrow’s products are sustainable
In addition to the in-depth know-how, Trützschler Nonwovens has a broad portfolio of line concepts for the production of sustainable, biodegradable nonwovens. Cotton is an important raw material for American producers, which is why Trützschler is showing solutions for processing raw cotton, comber noils and blends of viscose and cotton. Another focus is on the Voith/Trützschler concepts for wet-laid, hydroentangled WLS and CP nonwovens. Nonwovens made from viscose fibers and NBSK pulp, the raw material for the paper industry, not only offer a good cost/performance ratio, but also a small CO2 footprint.

Digital solutions optimize the production floor
In order to ensure lasting quality, Trützschler Nonwovens presents a modular, digital work environment that systematizes, digitizes and simplifies typical work processes. With the help of Industry 4.0 technologies, line, process and quality data relevant to a production lot can be stored, aggregated, visualized and analyzed with regard to process improvements.

Trützschler USA
With its headquarters in Charlotte, North Carolina, and more than 100 employees, Trützschler USA is the first point of contact for all matters relating to American nonwovens producers. The company is able to equip and convert machines according to customer specifications (certified UL508A panel shop), carry out factory acceptance tests and a wide range of repairs in Charlotte.

Source:

Trützschler Nonwovens & Man-Made Fibers GmbH

17.02.2022

C.L.A.S.S. will be at Filo to highlight the role of yarns in responsible innovation

The international eco-hub will be at Filo (23-24 February) with key partners such as Bemberg™ by Asahi Kasei, ROICA™ by Asahi Kasei, Ghezzi, Circular Systems™ and SUPREME GREEN COTTON® by Varvaressos to highlight the role of yarns in responsible innovation.

C.L.A.S.S. is ready for yet another moment dedicated to share and amplify its message of responsible innovation together with its key partners. The international eco-hub has been invited to attend the Filo fair with its own space in order to spread the word on the utmost importance of injecting innovation, sustainability and change starting from the very beginning of the supply chain.

“We are extremely pleased to be here at Filo, the fair for the very first and fundamental ingredient of fashion” Says Giusy Bettoni, Founder and CEO C.L.A.S.S. “We believe this is a valuable opportunity to  share possibilities and chances to start a conscious and yet innovative fashion product by learning about the latest developments in smart yarns”.

The international eco-hub will be at Filo (23-24 February) with key partners such as Bemberg™ by Asahi Kasei, ROICA™ by Asahi Kasei, Ghezzi, Circular Systems™ and SUPREME GREEN COTTON® by Varvaressos to highlight the role of yarns in responsible innovation.

C.L.A.S.S. is ready for yet another moment dedicated to share and amplify its message of responsible innovation together with its key partners. The international eco-hub has been invited to attend the Filo fair with its own space in order to spread the word on the utmost importance of injecting innovation, sustainability and change starting from the very beginning of the supply chain.

“We are extremely pleased to be here at Filo, the fair for the very first and fundamental ingredient of fashion” Says Giusy Bettoni, Founder and CEO C.L.A.S.S. “We believe this is a valuable opportunity to  share possibilities and chances to start a conscious and yet innovative fashion product by learning about the latest developments in smart yarns”.

01.02.2022

C.L.A.S.S. welcomes Circular Systems into its Material Hub

After the C.L.A.S.S. recent evolution of its communication tools, they are really pleased to introduce Circular Systems as new C.L.A.S.S. Material Hub partner.

Circular Systems is a California based materials science company, focused on creating a net positive impact on environment, society and economy through innovation. Its circular plus regenerative technologies provide systemic solutions for transforming waste into valuable fibre, yarns, and fabrics for the fashion industry.

Textile waste and agriculture residues are a huge problem, often burned, left to rot in the fields, or sent to landfills creating massive amounts of CO2. Circular Systems is looking at these waste streams as valuable resources, turning problem into a solution by converting them into high value materials for the fashion industry. The “Lightest Touch™“ philosophy, defines their mission to retain maximum amount of embedded energy in waste inputs while creating the “highest-value outputs” with the lowest impacts. Integration of these technologies into global supply chains is key without compromising quality, thus extending the life cycle of these materials.

After the C.L.A.S.S. recent evolution of its communication tools, they are really pleased to introduce Circular Systems as new C.L.A.S.S. Material Hub partner.

Circular Systems is a California based materials science company, focused on creating a net positive impact on environment, society and economy through innovation. Its circular plus regenerative technologies provide systemic solutions for transforming waste into valuable fibre, yarns, and fabrics for the fashion industry.

Textile waste and agriculture residues are a huge problem, often burned, left to rot in the fields, or sent to landfills creating massive amounts of CO2. Circular Systems is looking at these waste streams as valuable resources, turning problem into a solution by converting them into high value materials for the fashion industry. The “Lightest Touch™“ philosophy, defines their mission to retain maximum amount of embedded energy in waste inputs while creating the “highest-value outputs” with the lowest impacts. Integration of these technologies into global supply chains is key without compromising quality, thus extending the life cycle of these materials.

Circular Systems has three waste-to-fibre platforms that offer an efficient management of textile and agricultural waste:

  • The Agraloop™ refines natural fibers derived from agricultural crops into textile-grade fiber called Agraloop™ BioFibre™.  A NEW Natural Fiber mindfully sourced for circularity. With our specialized processing technique, cellulose fiber from stems and leaves are purified into soft fiber bundles ready to spin into yarns. The Agraloop™ processes leftovers from various food and medicine crops including, oilseed hemp/flax, CBD hemp, banana, and pineapple.
  • Texloop™ Recycling produces high-quality GRS (Global Recycled Standard) certified recycled cotton fibre called RCOT™. Texloop™ preserves fiber quality for the next generation of recycled materials and blends with GOTS (Global Organic Textile Standard) certified organic cotton and Canopy approved man-made cellulosics to create near virgin quality yarns for knitting and weaving.
  • Orbital™ hybrid yarns create high-quality materials with high-performance, using organic and recycled fiber inputs. Orbital's patent-pending technology produces inherent wicking and fast dry performance materials, even with 50%-70% natural fiber composition, eliminating the need for chemical finishes to create high-performance fabrics.

All Circular Systems yarns are GRS, OCS and/or GOTS certified and are in the process of developing  their own Crop Residue Standard with Textile Exchange that would relate to the Agraloop™ platform technology.