From the Sector

The new chairman of the Industrievereinigung Chemiefaser e. V. is Stefan Braun, managing director of Indorama Ventures Mobility Obernburg GmbH.

Braun, who had already held the chair twice between 2014 and 2020, was elected in June 2023 at the IVC annual members' meeting in Lenzing, Austria. Klaus Holz, Managing Director of Indorama Ventures Fibers Germany GmbH, was not available for re-election after one term as IVC Chair and two previous terms as Vice-Chair.

The IVC General Assembly appointed Dieter Feldmann, Managing Director of CERDIA Produktions GmbH, as Deputy Chairman. He succeeds Werner Häller, COO of Monosuisse AG, who did not stand for this position. The previous Treasurer of the IVC, Dr. Till Boldt, Managing Director of ENKA International Lux SE & Co. KG, was confirmed in office for the fifth consecutive term.

All elections took place according to rotation. Deviating from the usual mandate of 3 years, the Board of Directors had itself elected for a shortened term until June 2024.

IVC Managing Director Dr Wilhelm Rauch will leave IVC after almost 22 years when his contract expires on 31 January 2024 and will take on new tasks. The chemist with a doctorate and REACH expert is looking forward to making his expertise available to companies across sectors in the future.

Giorgio Calculli has been appointed new managing director of ACIMIT, the Association of Italian Textile Machinery Manufacturers. A law graduate with a Master’s degree in training and employment policies, he has been on staff at ACIMIT since 2006 as head of the Association’s training, internal relations and technical department. Calculli takes over as ACIMIT managing director from Federico Pellegata, who after 25 years managing the Association has been appointed CEO of ACIMIT Servizi srl, the company set up by ACIMIT to provide services in support of associated member companies for the promotion of the Italian textile machinery industry in Italy and abroad.

“It has been a truly enriching experience,” asserts Federico Pellegata, “for which I am grateful to our associated members, ACIMIT’s Board, and the Association’s presidents who have served during my years in ACIMIT. However, my commitment to continue to promote the Italian textile machinery sector by no means ends here. As CEO of ACIMIT Servizi, I will continue to work relentlessly to ensure that ITMA, the world’s primary textile machinery trade fair, remains a representative showcase for the success of Italian manufacturers in the sector, as has been the case for the editions of the exhibition held in Italy in 2015 and 2023.”

ACIMIT managing director Giorgio Calculli comments: “I wish to thank the Board of ACIMIT for the appointment and for the opportunity to lend continuity to the work carried out by Federico Pellegata, for whom the success enjoyed at the latest edition of ITMA is only the most evident expression. I will work to further develop the membership base and ensure member companies receive maximum support from the Association in their business activities.”

West Yorkshire is to have a first-of-its-kind apprenticeship training course for textile engineering technicians, reflecting a resurgence in the industry locally, and more generally in the UK.

Calderdale College has partnered with the Textile Centre of Excellence (TCoE) and the British Textile Machinery Association (BTMA) to develop the bespoke Level 3 apprenticeship course which will start in September 2023.

Engineering Technician apprentices at Calderdale College will receive training from the TCoE, helping them to develop the engineering maintenance skills required to close the skills gap in West Yorkshire’s textile industry.

While the region has been a flourishing hub for textile excellence since the 19th century and is being revitalised through digitalization and the localisation of supply chains, its success is currently being hindered by an ageing workforce and high staff turnover.

Through adapting the engineering training at Calderdale College to address the current requirements of the textile industry, the unique new course will ensure the passing on of vital know-how and good practice aligned with the new skills demanded by Industry 4.0 and automation.

Collaborative Apprenticeships
Calderdale College has developed the programme over a two-year period through close collaboration with the TCoE and the BTMA, as well as through consultation with British heritage weaver AW Hainsworth and a number of other local textile companies.

The course launch follows on closely from the success of the Collaborative Apprenticeships project launched in 2022 at Calderdale College. To date, this has seen the college engage with over 100 local employers on the benefits of increasing the quantity and improving the quality of the apprenticeships that they offer, as well as encouraging others to introduce apprenticeships for the first time.

“Over the years, we’ve seen how beneficial apprenticeships can be for several sectors, particularly in terms of helping businesses to retain staff and ensuring that they have a steady flow of skilled workers coming in,” said Claire Williams, head of employer engagement at Calderdale College. “Having identified that employers in the textile manufacturing industry were struggling to find apprenticeship training that was designed around their needs, we knew that alongside employers and our partners, we needed to satisfy this critical gap in the market. We hope that this programme will act as a leading example for the rest of the industry to follow.”

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration and tabletop exhibit reservations are open for the ninth edition of Hygienix™, November 13-16, New Orleans, Louisiana. More than 450 absorbent hygiene and personal care professionals from around the world will gather for four days of networking, presentations, and business opportunities.
 
The theme for this year’s Hygienix is “Shaping the Future of Absorbent Hygiene.” The event will focus on the market’s continued growth with presentations on sustainability, technology advancements, disruptive small brands, and market data and trends. Hygienix will also offer a workshop on absorbent hygiene systems led by Jim Robinson, Absorbent Hygiene Insights, LLC, Monday, November 13^th. The full Hygienix program will be announced at a later date.
 
INDA is also introducing a new element for Hygienix – pre-conference webinars. Carlos Richer, Principal, Diaper Testing International, will present insights and trends in diaper design in the U.S. market and Heidi Beatty, CEO, Crown Abbey, LLC, will share her expertise in the absorbent hygiene sector.
 
More than 50 companies will showcase their innovations and technologies during the evening tabletop exhibits and receptions. Participants will be able to discuss their needs with technical leaders and source better solutions for their products, Nov. 14-15.
 
Nominations are being accepted through August 7th for the Hygienix Innovation Award™. Three finalists will be selected to present their absorbent hygiene products on Tuesday, November 14^th to hundreds of senior-level professionals. The winner of the Award will be announced at the end of the event, Thursday, November 1^6th.

July 12, the European Parliament adopted its position on the Ecodesign Regulation, which aims to improve the environmental sustainability and circularity of products placed on the EU market, including textiles.

While EURATEX recognises the importance of accelerating the green transition and welcomes the progress on the legislation, it regrets the EP’s approach to target the textile industry in a Regulation designed to be a framework legislation for all sectors.  

Representing 160 000 European textile companies, EURATEX has been highlighting that a successful legal framework is based on an inclusive and feasible approach, ensures sufficient capacity and sets a timeline for businesses to adjust. Therefore, EURATEX welcomes MEPs’ call for tailored support and smooth transition for SMEs. Strongly advocated by EURATEX, the European Parliament also strengthens the provisions on market surveillance, which is a key element for ensuring level playing field for EU companies in the Single Market.

As businesses already face difficulties to navigate through all ongoing policy and legislative initiatives, EURATEX appreciates the efforts of the EP to ensure legislative consistency, the lack of which may only create additional costs and administrative burdens for companies. The inclusivity and transparency of the future Ecodesign Forum have indeed received a positive boost.

EURATEX regrets that the European Parliament has overlooked the plea for legislative coherence on substances of concern and for keeping the ESPR aligned with existing chemical legislation to avoid overlapping or conflicting regulation. EURATEX advises that social sustainability aspects should be addressed within the due diligence legislative framework.

Regarding the future Ecodesign requirements for textiles, these will have to be based on reliable data, and supported by thorough analysis and impact assessments. The requirements should be set out in the textile-specific Delegated Act and should be developed with relevant stakeholders.

As the ESPR trialogue negotiations between the European Parliament, the Council of the EU and the European Commission unfold in autumn, EURATEX continues to stress the guiding principle of “fit-for-purpose” rules and the balance between high environmental objectives and competitiveness of companies.

Moreover, on Tuesday 11 July, the European Parliament's position on Industrial Emissions Directive (IED) was adopted by MEPs with 396 votes in favour, 102 against and 131 abstentions. EURATEX expresses concerns on this text because of the inclusion of standalone finishing plants in the scope of the new IED. This creates inconsistencies with the recently finalised Textile BREF document (adopted in Sevilla by all parties), which regulates industrial emissions for both pretreatments and finishing plants. Standalone finishing companies, typically SMEs, now face challenges to comply with specifications which were originally designed for different and bigger companies.

Increasing energy and resource efficiency in the construction sector will be key to the EU’s ambition of achieving climate neutrality by 2050. By enabling the manufacture of strong, durable and lightweight products, composite materials can help the construction sector improve its environmental sustainability, as well as reduce total lifecycle costs. The latest EPTA industry briefing, Pultruded composites contribute to a more sustainable future for construction, discusses how pultruded composites answer the need for materials offering high performance, faster installation, corrosion resistance and low maintenance.

The report is available to download from the EPTA website.

The future of construction
As one of the largest global users of energy and raw materials, the construction industry is under immense pressure to improve its sustainability. At the same time, it must respond to demands for improved performance and reduced total cost of ownership. New materials will be needed to minimise the use of natural resources, enable a reduction of carbon footprint and facilitate circular economy practices. Choosing the optimum materials required for durability throughout the lifecycle will be increasingly important. A shift to off-site production is also forecast, where factory-controlled environments and automated processes can improve quality control, lower waste, and reduce work on site.

Lightweight pultruded parts can be pre-assembled into modules or complete structures in the factory for faster installation on site. Lightweight profiles lower energy use during transportation and installation, and a longer service life combined with minimal maintenance can deliver a reduced through-life carbon footprint. Pultruded parts such as profiles, gratings, beams, tubes and planks are increasingly found in a range of building, construction and infrastructure applications. Examples include bridge decks, fencing, stairs and handrails, train platforms, cladding, utility poles, modular building concepts, and window frames.

One application offering large growth potential for composites is bridges. Composite bridges are being designed to provide a service life of 100 years and unlike steel bridges do not require regular repainting to protect them from corrosion. Over recent years, pultruded glass fibre composite has become a highly popular choice for pedestrian and cycle bridges. Pre-fabricated ‘easy fit’ bridge decking planks, pre-assembled bridge modules and complete bridge ‘kits’ are now available. Corrosion-resistant composite bridges are ideal for use near water or on the coast, and in remote locations where regular maintenance operations would be difficult. A composite bridge can deliver the same performance as a steel structure with a weight saving of up to 50% or more. This enables more streamlined bridge designs which require less substantial supporting structures and foundations, greatly reducing consumption of materials and energy. Lightweight also results in easier logistics and simplified installation. Pultruded are more easily transported to the construction site, with lower fuel consumption, and easier to move on site, often reducing labour requirements and the capacity of lifting equipment.

A lifecycle approach
As the construction industry looks to the future, the environmental and economic benefits of composite materials linked to easier logistics and installation, durability and low maintenance are becoming increasingly valued. More projects are demonstrating the benefits of composite materials and standards covering the design, fabrication and installation of pultruded profiles are making it easier for the construction industry to use them. With ongoing development and collaboration, pultrusion has the potential to contribute to a more sustainable future for construction and many other industries. EPTA will continue to promote the advancement of pultrusion technology and its applications and foster sustainable practices within the industry.

• The A+A Expert Talks head into their third round

On 20 June 2023 between 10.00 am and 11.30 am experts from the fields of sustainability, circular economy, environmental protection as well as corporate fashion and product management will be presenting lectures and discussing the topics of sustainability in supply chains, standardisation and quality seals as well as the associated challenges and solutions in cooperation with German Fashion. They will thereby provide a platform for the exchange of knowledge, experience and innovative approaches.

The focus on sustainability and the circular economy reflects the growing relevance of these topics in the world of work. More and more companies recognise the need to make their business practices more sustainable and optimise the use of resources.

This Expert Talk will be presented by Irina Olm, In-House Lawyer & Counsel of GermanFashion Modeverband Deutschland e.V. and Expert for Circular Economy and CSR, who will contribute her know-how on the European level.  

Benjamin Helfritz, Head of Quality in Digital and Green Transformation, DIN – German Institute for Standardisation, will introduce participants to the new standards for the Green Transition.  
The Digital Product Passport (DPP) is needed for both the green and digital transition. However, it will only achieve its full added value if interoperability is ensured between existing and emerging systems. The use of the DPP promotes more sustainability and digital progress.

Henk Vanhoutte, Secretary General, European Safety Federation (ESF) and Lucia Mendori, Regulatory Affairs Associate / Chair ESF Working Group Sustainability will present practical examples and concrete application factors for sustainable PPE as well as solutions for sustainable jobwear. They will provide an overview of survey results from their members regarding various sustainability aspects – pointing to how the industry is treating this important topic but also flagging up the limits to the sustainability of PPE.

Lena Bay Høyland, Product Director of the Swedish workwear manufacturer Fristads Kansas will share the sustainability strategy of her company which has committed to minimise its environmental impact by targets and effective measures. The progress made by Fristads Kansas was measured using concrete figures and audits. This is a use case highlighting the innovations and challenges associated with sustainable jobwear.

By organising the Expert Talks the leading international trade fair A+A jointly with its strategic partners from the German Federal Association for Occupational Safety and Health (Basi), Fraunhofer IPA, German Fashion (Modeverband Deutschland e.V.), DGUV (Germany Statutory Accident Insurance), BAuA (Federal Agency for Occupational Safety and Health), BMAS (Ministry of Labour and Social Affairs), IVPS Interessenverbund Persönliche Schutzausrüstung e.V. (PPE Stakeholder Association) as well as IFA (Institute for Occupational Safety) will provide its community with a networking and information platform.

Dr. Laurie-Ann Agama, Acting Assistant U.S. Trade Representative (USTR) for Textiles, wrapped up a three-day visit of state-of-the art U.S. textile manufacturing facilities in North and South Carolina, highlighting the importance of trade policies that bolster the competitiveness of the vibrant domestic supply chain that contributes significantly to the U.S. economy and workforce.

Dr. Agama, who advises the nation’s top trade chief on textile and apparel trade policy matters and conducts and oversees negotiations affecting textiles and apparel products, was joined by USTR textile trade officials in touring seven textile manufacturers including: Glen Raven, Barnet, Standard Textile, Parkdale Mills, Beverly Knits, Gildan, and Unifi.

Her three-day tour culminated in an industry roundtable discussion with key textile executives hosted by Unifi, in Greensboro, N.C.

U.S. textile executives spanning the fiber, yarn, fabric, and finished product textile and apparel industries participated in the roundtable and outlined critical policies, such as: the importance of maintaining the yarn forward rule of origin in the Dominican Republic-Central America Free Trade Agreement (CAFTA-DR) and other trade agreements; advancing the Miscellaneous Tariff Bill (MTB) and its importance to domestic manufacturers; closing the de minimis loophole in U.S. trade law; addressing larger systemic trade issues, particularly the use of forced labor, with China; and upholding buy American and Berry Amendment government procurement policies.

“We deeply appreciate Assistant USTR Agama’s visit to the heart of the U.S. textile industry in North and South Carolina this week to meet with U.S. textile executives and experience first-hand the breadth of the industry’s innovation, advanced sustainability practices, capital investments and critical contributions to local economies and the U.S. economy as a whole,” said Kim Glas, president and CEO of NCTO. “The three-day visit by Dr. Agama and the USTR textile team included facility tours of several NCTO member companies, all of which have made major investments in state-of-the-art manufacturing facilities that are part of a broader domestic industry supply chain that produced $65.8 billion in output in 2022 and employed 538,000 workers.”

Glas continued: “We are also grateful for Dr. Agama’s participation in the industry roundtable hosted by Unifi and substantive discussions around policy opportunities and challenges. We look forward to working closely with Dr. Agama, the USTR textile team and U.S. Trade Representative Ambassador Katherine Tai to advance policies that provide incentives for onshoring and nearshoring production and bolstering the industry’s competitiveness, while enforcing policies that address illegal trade practices that undermine this industry.”

“The U.S. textile industry has always been resilient, innovative, and a driving force of our nation’s competitiveness,” said Acting Assistant U.S. Trade Representative for Textiles Dr. Laurie-Ann Agama. “For USTR, this local engagement and conversations underscore our need to create trade policies that put workers first and promote inclusive economic growth. The spinning, knitting, and weaving operations of the textile industry are at the center of many communities across the Carolinas. This was another opportunity to hear first-hand how we trade can create jobs that allow workers, businesses, and communities to thrive.”

Sustainable Chemistry for the Textile Industry (SCTI™) and Together for Sustainability (TfS) are teaming up to support and accelerate the leather and textile industry's sustainability journey through sustainable chemistry. Together they will collaborate in driving convergence in standards and methodologies and inspire industry action for a better future.

SCTI is an alliance of leading chemical companies that strives to empower the textile and leather industries to apply sustainable, state-of-the-art chemistry solutions that protect factory workers, local communities, consumers and the environment.

TfS is a member-driven initiative, raising Corporate Social Responsibility (CSR) standards throughout the chemical industry. TfS members are chemical companies committed to making sustainability improvements within their own – and their suppliers’ – operations. TfS has also launched a comprehensive program to foster defossilization of chemical value chains, providing standardization tools to enable effective Scope 3 management based on primary data and launching the TfS Guideline to determine Product Carbon Footprint (PCF).

Both TfS and SCTI share the mission to drive transformational change, and intend to collaborate on advancing the industry’s sustainability goals, leveraging the TfS Scope 3 greenhouse gas emissions (GHG) program.

• Flame Retardancy for Composites Applications in the Transport Sector

On 10-11 May 2023, the AVK - Industrievereinigung Verstärkte Kunststoffe e. V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V. in Berlin organised for the first time an international, English-language conference on flame retardancy.

In 18 compact lectures, more than 20 experts informed nearly 80 participants about new developments, requirements and innovations regarding specific flame retardant properties of components made of fibre-reinforced plastics/composites for the transport sector.

Among others, there were presentations by industry representatives from Saertex, BÜFA, Clariant, Diehl Aviation and Airbus, but also from institutes such as the Fraunhofer Institutes or the Federal Institute for Materials Research and Testing. Presentations on the topics of standardisation, raw materials, automotive or recycling were on the agenda, but also flame retardants for connectors and battery housings for electric vehicles or fire-retardant systems for rail vehicles or fire-retardant CFRP made from recycled CF nonwoven were presented.