From the Sector

• Dividend of EUR 4.35 per share approved
• Lenzing Supervisory Board reduced from ten to nine elected members
• Dipl.-Bw. Peter Edelmann steps down from the Supervisory Board at his request
• Cord Prinzhorn, MBA, elected Chairman of the Supervisory Board

The 78th Annual General Meeting of Lenzing AG on April 26, 2022, passed a resolution to pay a dividend of EUR 4.35 per share in accordance with the Managing Board’s profit distribution proposal, which had been approved by the Supervisory Board. As a consequence, the payment of the dividend amounts to a total of EUR 115,492,500. The payment will be made on May 03, 2022.

The Annual General Meeting formally discharged the members of the Managing Board and the Supervisory Board from liability for the 2021 financial year, and set in advance the remuneration for the members of the Supervisory Board for the 2022 financial year. In addition, a vote was hold concerning the principles for the remuneration of the members of the Managing Board and the Supervisory Board (remuneration policy). The remuneration policy of Lenzing AG for the performance-based remuneration of the Managing Board is linked not only to financial performance criteria but also to non-financial sustainability criteria (ESG), which further promote the sustainable business strategy.

Elections to the Supervisory Board
Dipl.-Bw. Peter Edelmann stepped down from the Supervisory Board upon his own request, at the end of the Annual General Meeting. Mr. Edelmann has served as a member of the Supervisory Board since 2018 and as its Chairman since 2019, as well as on all committees of Lenzing AG.

The Annual General Meeting passed a resolution to extend the Supervisory Board mandates of Mag. Patrick Prügger (until the AGM that passes related resolutions concerning the 2022 financial year) and of Dr. Astrid Skala-Kuhmann (until the AGM that passes related resolutions concerning the 2025 financial year).

The Supervisory Board of Lenzing AG now consists of nine members elected by the AGM: Mag. Helmut Bernkopf, Dr. Christian Bruch, Dr. Stefan Fida, Dr. Markus Fürst, Dr. Franz Gasselsberger, Melody Harris-Jensbach, Cord Prinzhorn, MBA, Mag. Patrick Prügger and Dr. Astrid Skala-Kuhmann. Herbert Brauneis, Ing. Daniela Födinger, Helmut Kirchmair, Georg Liftinger und Johann Schernberger were appointed to the Supervisory Board by the Works Council.

At the constitutive Supervisory Board meeting following the AGM, Cord Prinzhorn, MBA, who had returned to the Supervisory Board after serving as CEO on an interim basis, was elected Chairman, and Dr. Stefan Fida was elected Deputy Chairman of the Supervisory Board.

Hologenix® announces that its newest innovation has achieved two recognitions. In addition to being a Top Ten winner in the Fibers & Insulation Category of ISPO Textrends Fall/Winter 2023/24, pure white CELLIANT has been shortlisted in the Drapers Sustainable Fashion 2022 Awards. The company is sharing the spotlight with recognized brands such as H&M, Sweaty Betty and Timberland. According to Drapers, the leading authority on fashion retailing in the UK since 1887, which sponsors these awards annually, this year they received the most entries ever, making them very competitive.

To create pure white CELLIANT rPET fiber, Hologenix developed a strategic partnership with the Ireland-based Wellman International Limited, a fully owned subsidiary of Indorama Ventures. Indorama Ventures is investing $1.5 billion on sustainability initiatives, allowing them to recycle 50 billion PET bottles globally by 2025 to support the growth of the circular economy. Wellman International has been a pioneer of recycling technologies for almost 50 years, offering specialist solutions for the medical, hygiene, automotive, home care and apparel sectors.  

Pure white CELLIANT rPET fiber is sustainably manufactured, with a low-impact supply chain. It is achieved by embedding bioceramic materials, that are naturally derived and ethically sourced, into fibers, yarns and fabrics. Wellman International has converted 100% of pure white CELLIANT Polyester production into rPET. This conversion to rPET has been implemented across all CELLIANT product categories, replacing traditional polyester and dramatically enhancing CELLIANT’s sustainability initiatives.

Pure white CELLIANT is recognized as a Class 1 medical device in the European Union and is able to carry the CE mark. Like CELLIANT, pure white CELLIANT captures and converts body heat into infrared energy, powering bio-responsive textiles. This energy is reflected back to the body, resulting in increased local circulation and cellular oxygenation. These advantages have a variety of wellness benefits, including stronger performance, faster recovery and better sleep, as well as many functional properties such as thermoregulation, quick-dry properties and odor inhibition.  

Wellman International distributes pure white CELLIANT fibers across Europe, the Middle East, Africa, Asia and the USA.

• 2021 Annual Results: First IFRS consolidated statements integrating the subsidiary Carbiolice
• Plan to build a first industrial facility with a strong financial support from the French Government and the Grand-Est Region: site selected in France in partnership with Indorama Ventures, world leader in the production recycled PET
• Successful commissioning of a demonstration facility in September 2021 and confirmation of the validity of the scale-up of Carbios’ enzymatic recycling technology
• Takeover of Carbiolice and full integration in the consolidated IFRS statements since June 4th, 2021
• Appointment of Philippe Pouletty as Chairman of the Board of Directors on April 1st, 2022
• Appointment of Emmanuel Ladent as CEO of the Company on December 1st, 2021
• Strengthening of Carbios’ financial structure: capital increase of €114 million with French and International investors and €30 million loan from the European Investment Bank (EIB)
• Group’s cash position of €105 million as of December 31, 2021, which does not include the €30 million EIB loan due to be drawn down in the first half of 2022

Carbios, a pioneer in the development of enzymatic solutions dedicated to the end-of-life of plastic, announced its operating and financial results for the year 2021. The financial statements as of December 31, 2021, were approved by the Company’s Board of Directors at their meeting on March 31, 2022.

“In 2021, Carbios achieved several technical and industrial milestones testifying of the soundness and successful execution of our strategy. The excellent results obtained from our demonstration plant confirms the industrial scale-up potential of our biological technology for the recycling of PET plastics and fibers. Together with our Consortium members, we also produced the world’s first food-grade PET sample bottles produced entirely from enzymatically recycled plastics; a world first. In addition, we have strengthened our financial structure by raising a landmark €114 million in May 2021 and we have taken full control of Carbiolice in June. In line with our objectives and with a strong financial support from the French Government and the Grand-Est Region, we will soon enable France to host the world’s first industrial facility dedicated to the biological recycling of plastics. Carbios’ enzymatic process will make it possible to recycle more than 50,000 tons of PET plastic waste per year,” comments Emmanuel Ladent, CEO of Carbios. “Our priority for 2022 is to finalize the terms of our partnership with Indorama Ventures, which will host the world’s first industrial facility operating our biological recycling process at its French production site in Longlaville. This year will also be about optimizing our commercial strategy, while continuing our innovation efforts on the end-of-life of other polymers.”

Click here to for further information.

The winner of the IMAGINING SUSTAINABLE FASHION competition was announced during a webinar broadcast on March 30 at 4pm attended by Giusy Bettoni, CEO of C.L.A.S.S. Eco Hub, Anna Detheridge, President of Connecting Cultures, Dio Kurazawa, Founding Partner of The Bear Scouts, Stefania Ricci, Director of the Salvatore Ferragamo Museum.
 
Vishal Tolambia, 24, a graduate with an MA in Fashion Futures from the London College of Fashion and in Fashion Design from the National Institute of Fashion Technology India, is a Fashion Sustainability researcher and a multidisciplinary designer. In 2021, Vishal founded the organization Humanity-Centred Designs (HCD) with the aim of transforming "human-centred design into humanity-centred designs through sustainable practices to foster the Fashion Industry."
 
In his communication project, the "Fashion Affair" video proposes a speculative view of fashion dating - derived from dating apps - a tool to effectively evaluate brands and their products, in the form of augmented reality. The consumer is not only informed in real time about the brand and supply chain, but the app also becomes a platform for matching products based on individual sustainability goals and commitments. "Fashion Affair" also won the special social media contest open to the public among the finalists selected by the jury for being the most voted project by Instagram followers on C.L.A.S.S.' profile.
 
Vishal ranked first among the finalists selected by the international jury composed of:
- Anna Detheridge, Founder and President, Connecting Cultures
- Giusy Bettoni, CEO and Founder, C.L.A.S.S.
- Rita Airaghi, Director, Gianfranco Ferré Research Center            
- Paola Arosio, Head of New Brands & Sustainability Projects, Camera Nazionale della Moda Italiana (The National Chamber for Italian Fashion)
- Jeanine Ballone, Managing Director, Fashion 4 Development
- Evie Evangelou, Founder and President, Fashion 4 Development
- Chiara Luisi, Sustainability Projects Coordinator, Camera Nazionale della Moda Italiana (The National Chamber for Italian Fashion)
- Sara Kozlowski, Director of Education and Sustainable Strategies, Council of Fashion Designers of America
- Dio Kurazawa, Founding Partner, The Bear Scouts
- Renata Molho, journalist and fashion writer, former editor-in-chief of L'Uomo Vogue and editor-at-large of L'Uomo Vogue, Vogue Italia, Casa Vogue
- Stefania Ricci, Director, Salvatore Ferragamo Museum.

• Innovation begins with creativity
• A pioneer of the manmade fiber industry

When the manmade fiber age began a century ago, a German company was responsible for the pioneering work involved. Barmag, established in 1922, was one of the world’s first companies to construct machines for the large-scale production of synthetic staple fibers. To this day, the leading manufacturer of manmade fiber spinning systems and texturing machines in Remscheid – a brand under the aegis of the Swiss Oerlikon Group since 2007 – has shaped technological progress in this sector; in future, with ever more innovations focusing on sustainability and digitalization.

Barmer Maschinenfabrik Aktiengesellschaft (Barmag) is founded in Barmen, located in the Bergische Land region, on March 27, 1922. The German and Dutch founders enter unchartered technological territory, one created as the result of a groundbreaking invention: in 1884, French chemist Count Hilaire Bernigaud de Chardonnet used nitrocellulose to produce the first so-called artificial silk, later known as rayon. The following decades see rapid development focusing on the search for synthetic textile fibers and their manufacturing technologies. As one of the first machine factories, Barmag battles its way through the eventful early years of the manmade fiber industry, the ‘Roaring Twenties’ and the Great Depression – and suffers the extensive destruction of its factories at the end of World War Two. Rebuilding is successful. With the unstoppable success story of purely synthetic plastic fibers such as polyamide, the company flourishes from the 1950s through to the 1970s, establishing sites in all international, for the textile industry at the time important, industrial regions and garnering prestige across the globe in the process. In the ups and downs of expansion, global competition and crises, Barmag reaches the very pinnacle of the market and becomes the preferred technological development partner for the manmade fiber industries in China, India and Turkey. The company has been a high-impact brand under the umbrella of the Oerlikon Group since 2007.

On the wings of innovation
Today, Oerlikon Barmag is a leading supplier of manmade fiber filament spinning systems and part of the Manmade Fibers Solutions business unit of the Oerlikon Polymer Processing Solutions Division. And our aspirations have not diminished: “The striving towards innovation and technological leadership has been, is and will always be part of our DNA”, emphasizes Georg Stausberg, CEO of Oerlikon Polymer Processing Solutions. In the past, this has been observable in such trailblazing innovations as the revolutionary WINGS generation of winders for POY in 2007 and WINGS for FDY in 2012. Currently, the focus of new and further developments is very much on digitalization and sustainability. Here, Oerlikon Barmag has – as one of the world’s first systems manufacturers – been implementing fully-networked smart factories for globally-leading polyester manufacturers since the end of the last decade. Within this context, digital solutions and automation are also helping to provide greater climate and environmental compatibility. This sustainability commitment is not only evidenced by the e-save label introduced for all products back in 2004: Oerlikon is endeavoring to also make all its sites carbon-neutral by 2030 and to acquire its energy exclusively from renewable sources. An ambitious target, whose achievement could be helped by the Oerlikon Barmag anniversary, states Georg Stausberg: “Innovation begins with creativity. And remembering the past provides plenty of motivation and inspiration for the future.”

Five players in the textile service industry announce the establishment of Cibutex (Circular Business Textiles). This new cooperative is dedicated to the recycling and recovery of fibres from discarded textiles. Cibutex wants to contribute to a circular textile chain through cooperation in the whole sector.

The textile service has been implementing key Circular Economy solutions for some time: rental, care, repair and reuse of textiles for professional use. "As an industry, we are in a position to delve even deeper into the world of the circular economy. Every linen rental company has many of the same products, which go through the same process every time: the textiles are washed, sorted and collected again after the period of use. After many washes, the textiles are rejected. With this rejected textile, we see a unique opportunity to finally put the idea of a closed textile chain into practice. The used textiles that have reached the end of their useful life can be recycled on an industrial scale and the fibre raw materials can be recovered to make new textiles. We want to exploit this potential to the full by founding Cibutex, a cooperative for all textile service providers in Europe," says Cibutex director Jan Lamme, explaining the background of the unique project.

Cross-competitive goal
The founders of Cibutex are four well-known, competing textile service companies and one supply partner: Blycolin Textile Services (Zaltbommel, NL), Dibella (Aalten), Edelweiss Groep (The Hague), Lamme Textile Management (Amsterdam, NL) and Nedlin (Elsloo, NL). The companies have deliberately joined forces in order to implement sustainability in textiles and clothing by means of closed material cycles throughout the sector.

"Important resources are hidden in our B2B used textiles. We want to recover these in cooperation with relevant recycling companies and thus promote textile recycling as demanded by the EU Commission. We have come together to achieve sufficient critical mass to determine the final recycling of our discarded laundry, with the goal of moving from textiles to textiles," says co-founder Luuk de Win (Nedlin).

Sustainable eco-balance
"By recycling the raw materials of our used textiles, we contribute to reducing the social, environmental and climate impacts of the textile industry related to cultivation and production, and this leads to a long-term improvement of the ecological footprint of our industry," adds co-founder Marc van Boekholt (Blycolin).

Increasing value
To make the final transformation step of the circular economic model "textile service" a success, any European textile service company can become a member of Cibutex. The cooperative takes care of the collection, transport to the recycling partners and remuneration for the old textiles, which are now limited to bed linen, table linen and bath linen. In the future, however, the group wants to develop solutions for other textiles as well. For example, the recycling of workwear is also on the agenda. The founders of Cibutex agree that this too is a treasure trove of resources that must be addressed.

Global Fashion Agenda (GFA), the non-profit organisation that fosters collaboration on sustainability in fashion to drive impact, has forged a new alliance with UN Climate Change secretariat (UNFCCC) to accelerate the fashion industry’s climate action.
 
The Fashion On Climate report projects that if the fashion industry does not accelerate its response to climate change, by 2030 it will produce around twice the volume of greenhouse gas emissions required to align with the Paris Agreement global warming pathways by 2050. With the urgent need for industry transformation, the new alliance between GFA and UNFCCC will accelerate the impact of the UN Fashion Industry Charter for Climate Action which aims to drive the fashion industry to net-zero emissions no later than 2050 in line with keeping global warming below 1.5 degrees.
 
The collaboration will be activated around the organisations’ prestigious forums including GFA’s Global Fashion Summit and UNFCCC’s annual Conference of Parties (COP). Through these forums, the organisations will collaborate to unite fashion leaders and core stakeholders to facilitate knowledge sharing, impactful partnerships, and the implementation of bold actions needed to meet the Fashion Charter targets.
 
Global Fashion Summit: Copenhagen Edition 2022, the leading international forum for sustainability in fashion, will take place on 7-8 June in the grand setting of the Royal Opera House, Copenhagen, Denmark. Under the theme ‘Alliances For a New Era’ - the Summit will endeavour to form previously inconceivable alliances within the fashion industry and also examine atypical cross-industry alliances, in a bid to accelerate the transition to a net positive reality.
 
UNFCCC will, through the Fashion Charter, contribute to the Summit content, where they will share insights on its progress and what further solutions are needed. UNFCCC will also hold its annual Fashion Charter meeting at the Summit, where the organisations will convene relevant experts to join resources and discuss tools that can enable the sector to achieve its climate targets laid out in the charter. The alliance will also continue for future editions Global Fashion Summit in other locations, in addition to Copenhagen.
 
Beyond the Summit, GFA and UNFCCC will continue to work together to elevate publications and reports, such as the Fashion CEO Agenda, and inform Fashion Charter meetings during COP27 to raise awareness among leaders on the most pressing issues and priorities and urging commitments from industry leaders to drive change within social, environmental and circular dimensions.
 
Federica Marchionni, CEO, Global Fashion Agenda, says: “GFA is striving to create impactful alliances that can accelerate the fashion industry’s transition to a net zero reality. We are therefore thrilled to be collaborating with UNFCCC as its Fashion Charter is an essential tool to mobilise the necessary industry transformation. Through our collaboration, we hope to bring together core fashion stakeholders, foster pre-competitive collaboration and provide even deeper insights and guidance to advance progress.”
 
Niclas Svenningsen, Climate Action manager, UNFCCC, says, “We are excited for this opportunity to reinforce our collaboration with the Global Fashion Agenda. The climate crisis is today the paramount issue for the fashion sector to address. While the Fashion Charter brings together a wide range of stakeholders to work collaboratively on solutions, the Global Fashion Agenda is an important venue for broader sustainability discussions in the fashion sector. We see many opportunities for further strengthening and highlighting both the sustainability and the climate work through this collaboration.”

Automatex, a member of TMAS, the Swedish textile machinery association, has recently supplied a number of its latest Industry 4.0-enabled automatic fitted sheet systems to customers in Europe.

The Automatex model FDC-77735-B90D-EC system enables the full production and folding of six fully-fitted sheets per minute – approaching 3,000 an average shift – overseen by a single operator and eliminating many of the repetitive cut and sew operations of the past. Elastics insertion –  usually a highly complex labour-intensive task – can be on all four sides of the sheet, two, or simply within the corners, depending on customer specifications.

Fabric is fed directly from the roll, with precise edge guiding and tension control, into a length-wise hemming and elastics insertion section with adjustable tension devices, before being measured and cross cut in an accumulator. It is then transferred to the cross hemming section, again with elastics insertion.

A side drop forming unit pre-forms the sheet before it is transported by a multi-axis clamp conveyor system to the corner sewing section, consisting of left and right overlock sewing heads. Here, the corners are robotically sewn at 90 degrees and labels are also attached when specified.

Further customised systems for folding are also supplied as required.

• Winners in Six Categories to be Announced at IDEA® 2022 in Miami Beach

Online voting for the IDEA® Achievement Awards representing the “best of the best” innovations in the global nonwovens and engineered fabrics industry in six categories will open on Feb. 28.

Industry professionals will have the opportunity to vote for the winners from the finalists and see award-winning achievements in person at IDEA® 2022, the World’s Preeminent Event for Nonwovens & Engineered Fabrics, March 28-31, at the Miami Beach Convention Center.

Presented by INDA, in partnership with Nonwovens Industry magazine, the awards recognize the leading introductions in equipment, raw materials, short-life, long-life and nonwovens products, and sustainability. To vote on the Nonwovens Industry website, visit: https://www.nonwovens-industry.com/idea-reg-achievement-awards

In addition, INDA will unveil the IDEA® 2022 Lifetime Achievement Award honoree and Nonwovens Industry will announce the IDEA® Entrepreneur Achievement Award recipient at the event.  

All of the winners will be announced on March 30 at a ceremony at IDEA® from 9:30 a.m. to 10:30 a.m. moderated by Dave Rousse, President, INDA and Karen, McIntyre, Editor, Nonwovens Industry.

The INDA Technical Advisory Board, consisting of technical professionals from member companies, has narrowed the competition from more than 100 online nominations to the following 18 finalists selected for their leading innovations since the last IDEA show in 2019.

The industry will have the chance to select their top choices from the three finalists in each of the following six categories through the online voting process:

IDEA® Equipment Achievement Award

• ESC-8 – Curt G. Joa, Inc.
  Imagine endless combinations of insert and chassis designs for adult incontinence production at the push of a button. With patent-pending ESC-8™ Electronic Size Change Technology, JOA has addressed the need for automated product size change. The release of this industry-leading, first-of-a-kind technology gives customers the flexibility to configure endless insert and chassis combinations while maintaining higher production speeds and minimizing raw material usage. The ESC-8™ can be integrated into new and existing machines.
   
• Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics Inc.
  Elastics are an integral component to many hygiene products. Imagine a diaper or incontinence product that is reliable, adhesive-free and extremely soft. Herrmann Ultrasonics Elastic Thread Anchoring (ETA) Sonotrode technology provides just that, in an industry first, easy-to-use closed-loop feedback manufacturing solution. The fixation of the elastic threads is accomplished with ultrasonic energy that offers a wide process window, without the need for tool changeovers, at processing speeds above 2,000 ft./min.
   
• Doffer Airlay Card – Technoplants SRL
  With airlaying suction and a doffing system like traditional roller cards, the Doffer Airlay Card makes it possible to produce carded webs with doffer in thicknesses from 10 to 1.500 gsm. With top and bottom suction, it can produce a partly carded and partly airlaid web. This card can comb, separate and make parallel all types of natural, synthetic and regenerated fibers for applications including hygiene, filtration, medical and gradient acquisition distribution layer (ADL).

IDEA® Raw Material Achievement Award

• sero™ premium hemp fiber – Bast Fibre Technologies Inc.
  sero™ 100 percent premium hemp fibers are the result of years of the company’s top-to-bottom supply chain experience. BFT’s proprietary processing technology is employed to carefully clean, individualize, and soften bast fibers that meet stringent nonwoven technical standards and are plastic-free, tree-free, and compostable. sero™ fibers are a plug-and-play replacement for plastic fibers that run seamlessly on major nonwoven platforms without compromising production speeds, efficiency, or uniformity.
   
• ODOGard – Rem Brands, Inc.
  Rem Brands, Inc.’s patented ODOGard® technology is a revolutionary advancement in odor elimination. This next-generation odor elimination mechanism works by covalent molecular bonding to malodors. Malodors are permanently attached to the ODOGard® molecule, changing them into non-odorous molecules forever. ODOGard® can be impregnated into pulp fluff and other kinds of media. Whether  malodors come from the air or from hygiene products, ODOGard® has it covered.
   
• SharoWIPES™ – Sharon Laboratories
  SharoWIPES™ by Sharon Laboratories, Israel, is a technological breakthrough from in-depth scientific research addressing industry needs for more “clean label, non-irritating, eco-friendly” consumer wet wipes. With their unique anti-biofilm mechanism, SharoWIPES™ offer dual protection from microbial contamination of both the wet wipe formula, as well as the non-woven fabric. SharoWIPES™ preservation systems deliver broad-spectrum protection at low levels contributing to wet wipe brand equity with free from, microbiome friendly, vegan and biodegradable claims.
   

IDEA® Short-Life Product Achievement Award

• MDP™ – Dermasteel, Ltd.
  MDP™ presents a breakthrough approach to restoring the quality of life for men experiencing bladder leakage. MDP™ is a revolutionary nonwoven product for men coping with light urinary incontinence that is invisibly discreet, effective, comfortable, and reliable. It features Body ID Technology™ for customized adjustment, variable elasticity strapping, self-reflexive side panels for unimpeded breathability, form-fitting to the unique characteristics of each man’s anatomy, and the smallest carbon footprint of any comparable male incontinence option.
   
• Organic 2.0 – Ellepot A/S
  In young plant propagation, plastic products are used in large quantities. Ellepot’s new paper is a game-changer supporting plastic exit strategies. During six years in development, Ellepot and Ahlstrom-Munksjö partnered with OrganoClick, the developer of special binders using organocatalysis, a field of chemistry awarded the Nobel Prize in 2021. The product is approved for organic crops in Germany, the UK, Denmark, The Netherlands, Sweden and Canada and certified okay home compostable and biodegradable in soil.
   
• LifeSavers Wipes – LifeSavers LLC
  LifeSavers Wipes are personal hygiene wipes that change color if they detect abnormal health indicators in the urine. The launch product is a diabetic wipe, which will change color if there are abnormal levels of glucose in the urine. The wipes are therefore triple purposed as they assist with personal hygiene after urinating, act as an early warning system, and serve as an instant glucose monitor. UTI and kidney disease wipes are next in line.
   

IDEA® Long-Life Product Achievement Award

• Canopy Hero Pro – Canopy
  Today’s reusable respirators are uncomfortable, limit communication, and can lose effectiveness after cleaning. Disposable options pose similar issues and generate waste. Canopy® has created a next-generation, reusable respirator for healthcare workers that’s comfortable, easy to clean, exceeds federal safety standards, has a transparent front to allow for improved communication, costs less than disposables, and can help save 7,200 tons of waste daily. Its patented, transparent, fully mechanical filter helps protect those who protect us.
   
• Long-Life Cellulose-based Nonwovens for Higher Performance in Reusable Baby Diapers – Kelheim Fibres GmbH and Sumo Diapers
  Innovation exemplified: the trend-setting Sumo Baby Cloth Diaper shows how needle-punched/thermobonded nonwovens find their way into reusable diapers, thanks to Kelheim Fibres’ specialty viscose fibers with adjusted cross-sections (trilobal and hollow). This technology pushes liquid management capabilities and the absorbency of washable hygiene products to new levels, creating a unique duality of high-performance and high-sustainability credentials, and opening up new fields of application.
   
• Nanofiber Cabin Air Filter – MANN + HUMMEL GmbH
  MANN+HUMMEL has developed a hybrid media by combining electret-based spunbond and a pure mechanical filtration layer of ultrafine polymer fibers. The result: an outstanding separation of PM1 particles up to 95 percent, according to DIN EN ISO 16890. This technology enables stable filtration performance and long-term efficiency over the whole filter lifetime. The nanofiber layer can be combined with any cabin air filter media of the MANN+HUMMEL range, improving air quality in a vehicle’s cabin significantly.
   

IDEA® Sustainability Advancement Award

• Pureflow8 – In Flight Material Separator – Diaper Recycling Technology Pte. Ltd.
  New bolt-on additions to the company’s Generation 8 recycling platform guarantee increased performance in terms of material purity and work efficiency. While recovering up to 87 percent of diaper waste raw material’s financial investment, DRT pushes the boundaries further to meet sustainability targets and include active pulp scanning, fluidizing SAP re-gen technology, and gravimetric pulp refeed processes. DRT recognizes its teams and suppliers who have worked tremendously hard to complete this major milestone.
   
• Fitesa® 100 Percent BioBased Bico – Fitesa
  Fitesa® S Bico 100 percent BioBased PE/PLA is a technically sophisticated plant-sourced nonwoven that has been successfully applied in innovative baby diapers as topsheet, backsheet, and front ear components to deliver classic spunbond strength with good abrasion resistance and converting performance. It is responsibly sourced, PE soft, and sustainable, leaving a negative carbon footprint by reducing environmental CO2. It represents the next generation of hygienic nonwovens designed to make work easier and life better.
   
• Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
  Finally, an alternative to metal and plastic screw caps! Blue Ocean Closures partnered with Glatfelter and ALPLA to accelerate and produce sustainable and environmentally-friendly packaging solutions. The companies optimized their use of renewable and recyclable wood fibers and airlaid materials by creating paper-based screw caps that are durable, strong, and water-resistant. The method of proprietary vacuum press forming allows for low production cost and high scalability.
   

IDEA® Nonwoven Product Achievement Award

• Sontara® Silk – Glatfelter Corp.
  Sontara® Silk perfectly fits facial contour, is luxurious on the skin, and has a minimal environmental impact. When infused with lotion, these masks have enhanced elasticity, conform closely to the skin, and have excellent adhesion. Sontara® Silk has superior translucency and ensures even penetration of active ingredients onto the skin. Sontara® Silk fabric is manufactured with premium fibers derived from natural raw material. These sustainable materials allow the product to be biodegradable and compostable.
   
• HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
  Suominen’s latest moist tissue product, HYDRASPUN® Aquaflo achieves dry tissue dispersibility through a proprietary blend of 100 percent sustainable cellulosic materials, minimizing environmental impact. This flushable nonwoven has a premium hand feel for a luxurious consumer experience. In addition, it passes dispersibility standards set by INDA (GD4) and the International Water Services Flushability Group (IWSFG.) HYDRASPUN® Aquaflo is produced in Europe and North America and represents multi-year development and market insights to deliver a personal care product ideal for today’s consumer.
   
• LS SAF™ Nonwoven Fabrics –Technical Absorbents
  Technical Absorbents developed a new grade of Low Shrink (LS) superabsorbent fiber (SAFTM) for use within a new range of nonwovens that are more resistant to shrinkage. The new LS SAFTM fiber and resulting fabrics were developed in response to demand from the medical industry for a superabsorbent nonwoven suitable for use in advanced wound pad dressings. The new fiber was engineered to be capable of withstanding the moisture used in the EtO sterilization process.

Moving forward after this year, the IDEA® Achievement Award will be presented every two years under the new cycle announced for the event with the subsequent IDEA® taking place April 23-25, 2024.

Shawmut Corporation hosted Deputy United States Trade Representative Sarah Bianchi at the company’s headquarters and state-of-the-art manufacturing facility in West Bridgewater, Mass., as part of the ambassador’s inaugural visit to textile manufacturing facilities in the New England area.

Ambassador Bianchi’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $64 billion in output in 2020 and employed nearly 530,000 workers. Shawmut Corporation is part of the broader U.S. textile industry that has been at the forefront of a domestic production chain that has collectively manufactured over one billion personal protective equipment (PPE) items during the COVID-19 pandemic.

The ambassador’s visit to Shawmut included a tour of the company’s manufacturing facility and a roundtable discussion highlighting the critical need for policies supporting a domestic supply chain and the innovative nature of the modern textile industry and its important contribution to the U.S. economy. Shawmut, a fourth-generation, family-run global advanced materials and textile manufacturer, is a global leader in automotive textile composites, innovative technical fabrics and custom laminating services, employing more than 700 employees worldwide with 10 global manufacturing plants and seven commercial offices. The company has also contributed greatly to U.S. PPE efforts, investing $20 million in a new state-of-the-art facility, which can produce up to 180 million NIOSH-approved N95 respirators and other PPE annually and created hundreds of new local jobs.

Ambassador Bianchi said, “Today’s tour of Shawmut’s manufacturing facilities and the roundtable discussion with textile industry executives was an invaluable opportunity for me to see innovative U.S. textile manufacturing first-hand, to learn more about the challenges that U.S. textile manufacturing faces, and to explore ways in which the Administration and industry can cooperate to support a worker-centric trade policy.”

During the visit, U.S. textile executives spanning the fiber, yarn, fabric, and finished product textile and apparel industries participated in a roundtable with the ambassador at which they discussed the innovative achievements and competitiveness of the domestic industry and outlined priority issues in Washington, such as the importance of Buy American and Berry Amendment government procurement policies, maintaining strong rules of origins in free trade agreements and the need to address larger systemic trade issues with China.