From the Sector

Reset
15 results
Propylat-Technologie Photo Autoneum Management AG
08.12.2023

Optimized acoustic performance thanks to sustainable technology with high recycled content

Autoneum’s sustainable, textile and lightweight Propylat technology reduces both interior and exterior noise of vehicles. Propylat was originally developed by Borgers Automotive, which was acquired by Autoneum in April 2023. The versatile technology is characterized by a flexible material composition of natural and synthetic fibers with a high recycled content and contributes to significant waste reduction thanks to its complete vertical integration. In addition, the fully recyclable technology variant Propylat PET is now part of the sustainability label Autoneum Pure.

Autoneum’s sustainable, textile and lightweight Propylat technology reduces both interior and exterior noise of vehicles. Propylat was originally developed by Borgers Automotive, which was acquired by Autoneum in April 2023. The versatile technology is characterized by a flexible material composition of natural and synthetic fibers with a high recycled content and contributes to significant waste reduction thanks to its complete vertical integration. In addition, the fully recyclable technology variant Propylat PET is now part of the sustainability label Autoneum Pure.

The ongoing electrification of mobility as well as increasingly strict regulatory requirements for vehicle performance in terms of sustainability and acoustics are presenting new challenges to car manufacturers worldwide. With Propylat, Autoneum now offers another lightweight, fiber-based and versatile technology whose sound-insulating and -absorbing properties as well as high content of recycled materials help customers address these challenges. Propylat-based products not only contribute to reducing pass-by noise and improving driver comfort, but they are also up to 50 percent lighter than equivalent plastic alternatives; this results in a lower vehicle weight and, consequently, less fuel and energy consumption as well as lower CO2 emissions.

Autoneum's innovative Propylat technology consists of a mixture of recycled synthetic and natural fibers – the latter include cotton, jute, flax or hemp, for example – that are consolidated using thermoplastic binding fibers without adding any further chemical binders. Thanks to the flexible fiber composition and the variable density and thickness of the porous material, the properties of the respective Propylat variant, for example with regards to acoustic performance, can be tailored to individual customer requirements. This allows for a versatile application of the technology in a variety of interior and exterior components such as wheelhouse outer liners, trunk trim, underbody systems and carpets. For instance, Propylat-based wheelhouse outer liners significantly reduce rolling noise both inside and outside the vehicle while at the same time offering optimum protection against stone chipping and spray water.

In terms of sustainability, Propylat always contains a high proportion of recycled fibers – up to 100% in some variants – and can be manufactured with zero waste. Thanks to the full vertical integration of Propylat and Autoneum’s extensive expertise in recycling processes, the technology also contributes to a further significant reduction in production waste. Moreover, the Propylat PET technology variant, which consists of 100% PET, of which up to 70% are recycled fibers, is fully recyclable at the end of product life. For this reason, Propylat PET has been selected for Autoneum Pure – the Company’s sustainability label for technologies with excellent environmental performance throughout the product life cycle – where it will replace the current Mono-Liner technology going forward.

Propylat-based components are currently available in Europe, North America and China.

Source:

Autoneum Management AG

DITF: Lignin coating for Geotextiles Photo: DITF
Coating process of a cellulose-based nonwoven with the lignin compound using thermoplastic processing methods on a continuous coating line.
27.10.2023

DITF: Lignin coating for Geotextiles

Textiles are a given in civil engineering: they stabilize water protection dams, prevent runoff containing pollutants from landfills, facilitate the revegetation of slopes at risk of erosion, and even make asphalt layers of roads thinner. Until now, textiles made of highly resistant synthetic fibers have been used for this purpose, which have a very long lifetime. For some applications, however, it would not only be sufficient but even desirable for the auxiliary textile to degrade in the soil when it has done its job. Environmentally friendly natural fibers, on the other hand, often decompose too quickly. The German Institutes of Textile and Fiber Research Denkendorf (DITF) are developing a bio-based protective coating that extends their service life.

Textiles are a given in civil engineering: they stabilize water protection dams, prevent runoff containing pollutants from landfills, facilitate the revegetation of slopes at risk of erosion, and even make asphalt layers of roads thinner. Until now, textiles made of highly resistant synthetic fibers have been used for this purpose, which have a very long lifetime. For some applications, however, it would not only be sufficient but even desirable for the auxiliary textile to degrade in the soil when it has done its job. Environmentally friendly natural fibers, on the other hand, often decompose too quickly. The German Institutes of Textile and Fiber Research Denkendorf (DITF) are developing a bio-based protective coating that extends their service life.

Depending on humidity and temperature, natural fiber materials can degrade in the soil in a matter of months or even a few days. In order to significantly extend the degradation time and make them suitable for geotextiles, the Denkendorf team researches a protective coating. This coating, based on lignin, is itself biodegradable and does not generate microplastics in the soil. Lignin is indeed biodegradable, but this degradation takes a very long time in nature.

Together with cellulose, Lignin forms the building materials for wood and is the "glue" in wood that holds this composite material together. In paper production, usually only the cellulose is used, so lignin is produced in large quantities as a waste material. So-called kraft lignin remains as a fusible material. Textile production can deal well with thermoplastic materials. All in all, this is a good prerequisite for taking a closer look at lignin as a protective coating for geotextiles.

Lignin is brittle by nature. Therefore, it is necessary to blend the kraft lignin with softer biomaterials. These new biopolymer compounds of brittle kraft lignin and softer biopolymers were applied to yarns and textile surfaces in the research project via adapted coating systems. For this purpose, for example, cotton yarns were coated with lignin at different application rates and evaluated. Biodegradation testing was carried out using soil burial tests both in a climatic chamber with temperature and humidity defined precisely according to the standard and outdoors under real environmental conditions. With positive results: the service life of textiles made of natural fibers can be extended by many factors with a lignin coating: The thicker the protective coating, the longer the protection lasts. In the outdoor tests, the lignin coating was still completely intact even after about 160 days of burial.

Textile materials coated with lignin enable sustainable applications. For example, they have an adjustable and sufficiently long service life for certain geotextile applications. In addition, they are still biodegradable and can replace previously used synthetic materials in some applications, such as revegetation of trench and stream banks.

Thus, lignin-coated textiles have the potential to significantly reduce the carbon footprint: They reduce dependence on petroleum-based products and avoid the formation of microplastics in the soil.

Further research is needed to establish lignin, which was previously a waste material, as a new valuable material in industrial manufacturing processes in the textile industry.

The research work was supported by the Baden-Württemberg Ministry of Food, Rural Areas and Consumer Protection as part of the Baden-Württemberg State Strategy for a Sustainable Bioeconomy.

Source:

Deutsche Institute für Textil- und Faserforschung Denkendorf (DITF)

(c) INDIA
13.10.2022

Finalists for Hygienix Innovation Award™ announced

  • Absorbent Hygiene Products Featuring Advanced Technology Announced:
    pH monitoring pantyliner (Kimberly-Clark), roll dispensing period product (Egal Pad) and novel potty training pad (Sposie Kids)

Three new absorbent disposable hygiene products that provide users with greater protection, convenience and discretion are the finalists for the Hygienix Innovation Award™ that will be selected at Hygienix™, the premier event for absorbent hygiene and personal care markets, Nov. 14-17, at The Roosevelt New Orleans Hotel.

The annual award recognizes and rewards innovation that uses nonwoven material or technology in a way that provides consumer benefit and expands its usage.  
Each of the companies will present their products during the event on Nov. 15 and INDA’s Director of Education & Technical Affairs Matt O’Sickey will announce the winner on Nov. 17, at 11:30 a.m. to conclude Hygienix™.  

  • Absorbent Hygiene Products Featuring Advanced Technology Announced:
    pH monitoring pantyliner (Kimberly-Clark), roll dispensing period product (Egal Pad) and novel potty training pad (Sposie Kids)

Three new absorbent disposable hygiene products that provide users with greater protection, convenience and discretion are the finalists for the Hygienix Innovation Award™ that will be selected at Hygienix™, the premier event for absorbent hygiene and personal care markets, Nov. 14-17, at The Roosevelt New Orleans Hotel.

The annual award recognizes and rewards innovation that uses nonwoven material or technology in a way that provides consumer benefit and expands its usage.  
Each of the companies will present their products during the event on Nov. 15 and INDA’s Director of Education & Technical Affairs Matt O’Sickey will announce the winner on Nov. 17, at 11:30 a.m. to conclude Hygienix™.  

Egal Pads: Pads on a Roll™ –A wrapped super-thin absorbent period pad that dispenses like toilet paper in public bathroom stalls, preventing the personal embarrassment of not having a menstrual product when needed. This product promotes period product accessibility and destigmatizes menstrual health. It is targeted to schools and universities and the away-from-home market.

Kimberly-Clark: Kotex® Pantyliner with pH Indicator – The new Kotex Pantyliner with pH indicator, shifts color at the moment it needs to be replaced. This technology works by changing the color from yellow to blue when activated by fluids such as urine, sweat, or others. By indicating the moment to change the product, helps to maintain the intimate area clean, fresh, and consequently healthy.

Sposie Kids: Sposie® Dribbles® Potty Training Pads – An absorbent potty training pad that adheres to boy’s and girl’s underwear to protect against leaks and accidents during the transition from diapers to underwear, while still providing physical cues to the wearer to promote potty training.  The pads absorb over half of an average 2-year-old’s bladder capacity and are 100 percent free from any fragrance, latex, and chlorine.

Hygienix™ Conference Highlights
In addition to the award presentation, the Hygienix™ conference will focus on sustainability with presentations by more than 20 industry experts on sustainable inputs, natural fibers, product transparency, reusable menstrual products, recyclable diapers and the latest market forecasts and insights into consumer buying trends.
Hygienix™ will also offer two specialized workshops, a myriad of business connection opportunities, a welcome reception, first-time attendee mentorship program, and two evenings of tabletop receptions.

More information:
Hygienix India
Source:

INDIA

31.08.2022

DNFI Award 2022 – Deadline 9 Sept

As every year, in 2022 the Discover Natural Fibers Initiative (DNFI) called on individuals, universities, textile researchers and companies to submit their products, projects, processes and ideas in the field of Natural Fibres from the following categories:

  • Innovative products, components or applications
  • Innovative processes and procedures
  • Innovative research and science

The DNFI Innovation in Natural Fibres Award aims to promote the development of new products/components and applications using natural fibres as well as new processes for manufacturing of environmental friendly products. Universities, institutes, industry and individuals working in the area of scientific research are invited to participate. “Sustainability” should be just one important aspect of each submission considered by the judges.

The DNFI Innovation in Natural Fibres Award aims to recognise the innovations as well as the people and institutions responsible for them with the goal of raising public awareness of the achievements of the natural fibre sector as a whole.

As every year, in 2022 the Discover Natural Fibers Initiative (DNFI) called on individuals, universities, textile researchers and companies to submit their products, projects, processes and ideas in the field of Natural Fibres from the following categories:

  • Innovative products, components or applications
  • Innovative processes and procedures
  • Innovative research and science

The DNFI Innovation in Natural Fibres Award aims to promote the development of new products/components and applications using natural fibres as well as new processes for manufacturing of environmental friendly products. Universities, institutes, industry and individuals working in the area of scientific research are invited to participate. “Sustainability” should be just one important aspect of each submission considered by the judges.

The DNFI Innovation in Natural Fibres Award aims to recognise the innovations as well as the people and institutions responsible for them with the goal of raising public awareness of the achievements of the natural fibre sector as a whole.

Get the details online.

More information:
DNFI DNFI award
Source:

European Industry and Research Exchange on Technical Textiles

03.08.2022

Sustainable Developments in Absorbent Hygiene & Personal Care at Hygienix™

  • INDA Announces Full Program and Opens Registration for Premier Event in New Orleans

With reusable and recyclable products and new inputs offering growth opportunities in absorbent hygiene and personal care products, Hygienix™ will provide an insightful view into the market’s future this November in New Orleans.

Industry participants from around the world and throughout the supply chain will convene and connect for the eighth edition of the premier event for the fast-growing segment on November 14-17, at The Roosevelt New Orleans Hotel.

The in-person conference will highlight the segment’s continued growth and new opportunities with presentations by more than 20 industry experts on sustainable inputs, natural fibers, product transparency, reusable menstrual products, recyclable diapers and more as well as the latest market forecasts and insights into consumer buying trends.

  • INDA Announces Full Program and Opens Registration for Premier Event in New Orleans

With reusable and recyclable products and new inputs offering growth opportunities in absorbent hygiene and personal care products, Hygienix™ will provide an insightful view into the market’s future this November in New Orleans.

Industry participants from around the world and throughout the supply chain will convene and connect for the eighth edition of the premier event for the fast-growing segment on November 14-17, at The Roosevelt New Orleans Hotel.

The in-person conference will highlight the segment’s continued growth and new opportunities with presentations by more than 20 industry experts on sustainable inputs, natural fibers, product transparency, reusable menstrual products, recyclable diapers and more as well as the latest market forecasts and insights into consumer buying trends.

Hygienix also will offer two specialized workshops, and a myriad of business connection opportunities including a welcome reception on Nov. 14 and a first-time attendee mentorship program.
Participants will discover innovative products in absorbent hygiene and personal care at tabletop exhibits with evening receptions on Nov. 15-16, providing opportunities for 60 companies to showcase their unique offerings.

Three finalists will each present their innovative and technically sophisticated disposable absorbent hygiene products as they vie for the prestigious Hygienix Innovation Award™. Nominations are open until August 29. Demonstrating the interest in sustainability, last year’s award recipient was Kudos Diaper Subscription featuring its 100% cotton disposable diaper.

Hygienix Highlights
Absorbent hygiene – the single largest nonwoven end‐use category (by square meters) – is expected to continue its strong growth over the next four years, creating market opportunities in this thriving area driven by growing consumer interest for environmentally-friendly options in material inputs and end-of-life options.

Participants will hear the latest data and forecasts from analysts during presentations by Robert Fry, Jr., Ph.D., Principal of Robert Fry Economics LLC on the Global Economy – What we Can Expect in 2023; Pricie Hanna, Managing Partner, and Colin Hanna, Director of Market Research, Price Hanna Consultants on Disposables versus Reusables; and Simon Preisler, Vice President of Logistics, Central National Gottesman delivering a Logistic Market Update.

A panel of entrepreneurs will discuss the challenges, biases and taboos to bringing innovations into the marketplace. Experts sharing their insights will be Mia Abbruzzese and Alexandra Fennell, co-founders of Grace; Amrita Saigal, founder and CEO, Kudos; and Cindy Santa Cruz, President of ParaPatch.

A session on Next-Generation Menstrual Products and their Users will feature Liying Qian, Research Analyst, Euromonitor International providing market data on disposable and reusable period products; Frantisek Riha-Scott, Founder, Confitex discussing reusable products; and Greta Meyer, Co-Founder and CEO, Sequel on Reengineering the Tampon.
Also focusing on period products will be a presentation by Danielle Keiser, Managing Director, Impact, Madami on Changing the Conversation with Consumersmoderated by Heidi Beatty, Chief Executive Officer, Crown Abbey, LLC.

Other intriguing not-to-be-missed presentations centered on sustainability trends include:

  • Assessing Sustainable Fiber Options in the Context of Disposable Hygienic Products – Richard Knowlson, Principal, RPK Consulting LLC
  • Five Generations of Hygiene + Sustainability – Matt Schiering, Professor of Marketing, Dominican University
  • Recycling Approaches for Disposable Diaper Waste – Jeannine Cardin, Quality and R&D, RecycPHP Inc.

Hygienix will provide additional focused learning opportunities with two essential short courses (with separation registration fees) on Nov. 14 focused on Absorption Systems for Absorbent Hygiene Products, from 1 to 3:30 p.m. and Global Diaper Trends from 3:45 to 6 p.m.

More information:
Hygienix INDA
Source:

INDA

Natural fibers combined with bio-derived epoxy resins provide sustainable options for Industrial markets (c) Hexcel
Hexcel HexPly® Nature Range
11.05.2022

Hexcel Launches HexPly® Nature Range

  • Natural fibers combined with bio-derived epoxy resins provide sustainable options for Industrial markets

Hexcel has developed a new product range that combines Hexcel resin systems made with bio-derived resin content with natural fiber reinforcements to create material solutions for Automotive, Winter Sports, Marine and Wind Energy applications.

HexPly Nature Range includes proven resins such as HexPly M49, M78.1-LT and M79 but with bio-derived epoxy resin content. The excellent resin characteristics remain unchanged in the new Nature Range products, maintaining high mechanical performance and consistent processing properties.
In addition, the HexPly Nature Range provides prepreg options with natural fiber reinforcements that can be seamlessly integrated into existing production processes.

Hexcel worked with TÜV Austria to provide independent, high-quality measurement and assessment of the bio-content of HexPly Nature Range products. TÜV Austria’s OK biobased certification uses a standardized measurement of the biobased carbon content enabling transparency and easy like-for-like comparison between products.

  • Natural fibers combined with bio-derived epoxy resins provide sustainable options for Industrial markets

Hexcel has developed a new product range that combines Hexcel resin systems made with bio-derived resin content with natural fiber reinforcements to create material solutions for Automotive, Winter Sports, Marine and Wind Energy applications.

HexPly Nature Range includes proven resins such as HexPly M49, M78.1-LT and M79 but with bio-derived epoxy resin content. The excellent resin characteristics remain unchanged in the new Nature Range products, maintaining high mechanical performance and consistent processing properties.
In addition, the HexPly Nature Range provides prepreg options with natural fiber reinforcements that can be seamlessly integrated into existing production processes.

Hexcel worked with TÜV Austria to provide independent, high-quality measurement and assessment of the bio-content of HexPly Nature Range products. TÜV Austria’s OK biobased certification uses a standardized measurement of the biobased carbon content enabling transparency and easy like-for-like comparison between products.

At JEC World in Paris on May 3-5, Hexcel presented an alpine ski produced by the Tecnica Group Ski Excellence Center which produces skis for Blizzard and for Nordica using HexPly Nature Range M78.1-LT UD flax fiber prepreg. In addition to providing a bio-based material solution, the natural fiber-reinforced prepreg also offers the potential to improve impact performance and vibration damping in the ski.

Claude Despierres, VP of Sales and Marketing – Industrial at Hexcel, said, “Our new HexPly Nature Range forms an important part of providing customers with biobased, TÜV-certified material options based on our established prepreg resin systems. Marine, winter sports, wind energy and automotive manufacturers can now have the choice to switch from petroleum-based material solutions to Hexcel HexPly Nature Range with no compromise in performance or process efficiency.”

More information:
Hexcel’s HexPly® JEC World
Source:

Hexcel

(c) INDA
23.09.2021

Hygienix™ 2021: Live, in-person conference Nov 2021

  • Post-Pandemic Market Opportunities, New Technologies and Sustainability Highlight Conference This Fall in Arizona

 
The global absorbent hygiene and personal care markets are enthusiastically anticipating the return of Hygienix™ 2021 as a live, in-person conference Nov. 15-18, in Scottsdale, Arizona, focusing on post-pandemic opportunities, sustainability, new technologies and award-winning products.

The event will offer exciting opportunities for Hygienix participants to engage with new and existing customers in a face-to-face setting, and discover the latest innovations over four days at the Westin Kierland Resort. Highlights include two nonwovens workshops, a welcome reception, opportunities for 60 tabletop displays with receptions, eight intriguing panel discussions and presentations for the Hygienix Innovation Award™ and the INDA Lifetime Service Award.

  • Post-Pandemic Market Opportunities, New Technologies and Sustainability Highlight Conference This Fall in Arizona

 
The global absorbent hygiene and personal care markets are enthusiastically anticipating the return of Hygienix™ 2021 as a live, in-person conference Nov. 15-18, in Scottsdale, Arizona, focusing on post-pandemic opportunities, sustainability, new technologies and award-winning products.

The event will offer exciting opportunities for Hygienix participants to engage with new and existing customers in a face-to-face setting, and discover the latest innovations over four days at the Westin Kierland Resort. Highlights include two nonwovens workshops, a welcome reception, opportunities for 60 tabletop displays with receptions, eight intriguing panel discussions and presentations for the Hygienix Innovation Award™ and the INDA Lifetime Service Award.

As the market emerges from the pandemic, trends in sustainability such as replacing plastic with natural fibers, recycling and composting will present new opportunities that will be addressed by 30 presenters from industry companies. Conference participants also will discover how new technologies such as smart sensors and haptics — the use of technology that stimulates the senses of touch and motion — are helping to change the consumer experience.

Hygienix sessions featuring moderated discussions with industry-leading experts and Q&A opportunities are focused on the following themes:

  • New Options for Responsible End-of-Life
  • Haptics: Four Approaches to Assessing Feel
  • Products and Process Innovations in Global Absorbent Hygiene Products (AHPS)
  • Absorbent Hygiene Products Market Stats, Trends and Policy Insights
  • E-Hygiene Advancements
  • Feminine Care: Challenges to the Status Quo (presented in two parts)
  • New Approaches and Unmet Needs in Baby and Incontinence AHPS

Hygienix will address the latest research and statistics including:

  • Understanding the State of the Nonwovens Absorbent Hygiene Market, COVID-19 Impact and Baby Boom or Bust
  • Direct-to-Consumer Winners, Losers & Insights
  • Evolution of Sustainable Hygiene: Opportunity, Challenge, and Future Growth
  • Single-Use Plastics Policy Developments in North America
  • Understanding Consumer Needs and Desires When Considering Incontinence Products
More information:
Hygienix nonwovens INDA
Source:

INDA

ANDRITZ receives order for an elliptical cylinder pre-needler (c) ANDRITZ
Elliptical cylinder pre-needler during assembly
19.04.2021

ANDRITZ receives order for an elliptical cylinder pre-needler

International technology Group ANDRITZ has received an order from Amarande SAS to supply an elliptical cylinder pre-needler for their plant in Lussac les Châteaux, France. This machine will process shoddy and natural fibers for the production of heavy felts. Installation and start-up of the machine are scheduled for the second quarter of 2021. The new needlepunch production line with the high-performance ANDRITZ cylinder pre-needler will allow Amarande to offer high-quality products and thus open up new market opportunities.

ANDRITZ offers a complete range of elliptical cylinder pre-needlers serving different weights, widths, speeds and punching capacity. Over the years they have become a must for production of heavy products, special applications and also for demanding applications like automotive. They are a key success factor in enabling the subsequent needling machines to process heavy batts smoothly and control the progressive draft through the consolidation process.  

International technology Group ANDRITZ has received an order from Amarande SAS to supply an elliptical cylinder pre-needler for their plant in Lussac les Châteaux, France. This machine will process shoddy and natural fibers for the production of heavy felts. Installation and start-up of the machine are scheduled for the second quarter of 2021. The new needlepunch production line with the high-performance ANDRITZ cylinder pre-needler will allow Amarande to offer high-quality products and thus open up new market opportunities.

ANDRITZ offers a complete range of elliptical cylinder pre-needlers serving different weights, widths, speeds and punching capacity. Over the years they have become a must for production of heavy products, special applications and also for demanding applications like automotive. They are a key success factor in enabling the subsequent needling machines to process heavy batts smoothly and control the progressive draft through the consolidation process.  

Established in 1990, Amarande is an important French producer of nonwovens, specialized in the production of felt and wadding from recycled textile and natural fibers (wool, cotton, hemp, flax, jute, etc.). The company operates in various markets such as furniture, green spaces, horticultural crops, and insulation.

Source:

ANDRITZ AG

Swiss weaving machinery manufacturers are in the forefront of novel application development ©Stäubli
Multilayer Aramid
17.03.2021

Swiss weaving: Fabrics of the future

  • Swiss weaving machinery manufacturers are in the forefront of novel application development

Shoes and electronic calculators are probably not the first products people would associate with the textile weaving process. But they certainly signpost the future for woven fabrics, as two examples of the ever-wider possibilities of latest technology in the field. Fashion and function already combine in the increasing popularity of woven fabrics for shoes, and this is a present and future trend. Calculators in fabrics? That’s another story of ingenious development, using so-called ‘meander fields’ on the back and keys printed on the front of the material.

  • Swiss weaving machinery manufacturers are in the forefront of novel application development

Shoes and electronic calculators are probably not the first products people would associate with the textile weaving process. But they certainly signpost the future for woven fabrics, as two examples of the ever-wider possibilities of latest technology in the field. Fashion and function already combine in the increasing popularity of woven fabrics for shoes, and this is a present and future trend. Calculators in fabrics? That’s another story of ingenious development, using so-called ‘meander fields’ on the back and keys printed on the front of the material.

These glimpses of the outlook for modern weavers are among the highlights of developments now being pioneered by Swiss textile machinery companies. All weaving markets require innovation, as well as speed, efficiency, quality and sustainability. Member firms of the Swiss Textile Machinery Association respond to these needs at every point in the process – from tightening the first thread in the warp to winding the last inch for fabric delivery. They also share a common advantage, with a leading position in the traditional weaving industry as well as the expertise to foster new and exciting applications.

Technology and research cooperation
The concept of a ‘textile calculator’ was developed by Jakob Müller Group, in cooperation with the textile research institute Thuringen-Vogtland. Müller’s patented MDW® multi-directional weaving technology is able to create the meander fields which allow calculator functions to be accessed at a touch. A novel and useful facility, which suggests limitless expansion.

Today, the latest woven shoes are appreciated for their precise and comfortable fit. They score through their durability, strength and stability, meeting the requirements of individual athletes across many sports, as well as leisurewear. Stäubli is well known as a leading global specialist in weaving preparation, shedding systems and high-speed textile machinery. Its jacquard machines offer great flexibility across a wide range of formats, weaving all types of technical textiles, lightweight reinforcement fabrics – and shoes.

It’s possible to weave new materials such as ceramics, mix fibers such as aramid, carbon and other, and produce innovative multi-layers with variable thicknesses. Such applications put special demands on weaving machines which are fulfilled by Stäubli high-performance TF weaving systems.

Great weaving results are impossible without perfect warp tension, now available thanks to the world-leading electronic warp feeding systems of Crealet. Some market segments in weaving industry today demand warp let-off systems which meet individual customer requirements. For example, the company has recognized expertise to understand that geotextile products often need special treatment, as provided by its intelligent warp tension control system. Individual and connective solutions are designed to allow external support via remote link. Crealet’s warp let-off systems are widely used in both ribbon and broadloom weaving, for technical textiles applied on single or multiple warp beams and creels.

Functional, sustainable, automated
Trends in the field of woven narrow fabrics are clearly focused on functionality and sustainability. The Jakob Müller Group has already embraced these principles – for example using natural fibers for 100% recyclable labels with a soft-feel selvedge. It also focuses as much as possible on the processing of recycled, synthetic materials. Both PET bottles and polyester waste from production are recycled and processed into elastic and rigid tapes for the apparel industry.

For efficient fabric production environments, it is now recognized that automated quality solutions are essential. Quality standards are increasing everywhere and zero-defect levels are mandatory for sensitive applications such as airbags and protective apparel.

Uster’s latest generation of on-loom monitoring and inspection systems offers real operational improvements for weavers. The fabric quality monitoring prevents waste, while the quality assurance system significantly improves first-quality yield for all applications. Protecting fabric makers from costly claims and damaged reputations, automated fabric inspection also removes the need for slow, costly and unreliable manual inspection, freeing operators to focus on higher-skilled jobs.

Smart and collaborative robotics (cobots) offer many automation possibilities in weaving rooms. Stäubli’s future oriented robotics division is a driver in this segment with first effective installations in warp and creel preparation.

Control and productivity
Willy Grob’s specialized solutions for woven fabric winding focus on reliable control of tension, keeping it constant from the start of the process right through to the full cloth roll. Continuous digital control is especially important for sensitive fabrics, while performance and productivity are also critical advantages. In this regard, the company’s large-scale batching units can provide ten times the winding capacity of a regular winder integrated in the weaving machine.

The customized concept by Grob as well as design and implementation result in great flexibility and functionality of the fabric winding equipment – yet another example of Swiss ingenuity in textile machinery.  
There is even more innovation to come in weaving – and in other segments – from members of the Swiss Textile Machinery Association in future! This confident assertion is founded on an impressive statistic: the 4077 years of experience behind the creative power of the association’s member firms. It’s proof positive that their developments grow out of profound knowledge and continuous research.

MaruHachi/AMAC: High-temperature thermoplastic tapes and laminates (c) MaruHachi
16.02.2021

MaruHachi/AMAC: High-temperature thermoplastic tapes and laminates

With their recently installed high-temperature unidirectional tape line, Japan-based composites manufacturer MaruHachi enables new opportunities for high-end applications in demanding market segments like aerospace, automotive or others outperforming traditional materials based on PP and PA which are already widely available.

In the first phase, MaruHachi will produce up to 40 tons/year and focuses now specifically on high-temperature thermoplastic uni-directional (UD) tapes and multi-layer sheet laminates. The material is based on high-performance fibers like carbon, aramid, glass or natural fibers and the matrix can be high-performance polymers like PPS, PEEK or other higher temperature polymers, which are much tougher than epoxies and easy to recycle. With a width of 500 mm, a specific weight from 60 to 350 g/m2, depending on the chosen material, the lines can operate under temperatures up to 420 degrees Celsius. Working under these extremely high temperatures allows for better material properties of the final application, higher performance, increased resistance and integrated high-performance functionalities e.g. by overmoulding.

With their recently installed high-temperature unidirectional tape line, Japan-based composites manufacturer MaruHachi enables new opportunities for high-end applications in demanding market segments like aerospace, automotive or others outperforming traditional materials based on PP and PA which are already widely available.

In the first phase, MaruHachi will produce up to 40 tons/year and focuses now specifically on high-temperature thermoplastic uni-directional (UD) tapes and multi-layer sheet laminates. The material is based on high-performance fibers like carbon, aramid, glass or natural fibers and the matrix can be high-performance polymers like PPS, PEEK or other higher temperature polymers, which are much tougher than epoxies and easy to recycle. With a width of 500 mm, a specific weight from 60 to 350 g/m2, depending on the chosen material, the lines can operate under temperatures up to 420 degrees Celsius. Working under these extremely high temperatures allows for better material properties of the final application, higher performance, increased resistance and integrated high-performance functionalities e.g. by overmoulding.

Since 2017, MaruHachi Group is active in the European market in cooperation with Dr. Michael Effing,the CEO of AMAC GmbH, who advises and supports the company strategically. The established, family-owned MaruHachi Group has a strong history in automotive and medical textiles and has been active in the innovative composites market for more than 15 years.

Toshi Sugahara, CEO of MaruHachi: “For many years, we have already been cooperating with domestic and international partners on high-demand applications and therefore, MaruHachi decided now to invest over 1 million EUR in this new line in phase 1, including a funding participation from the Japanese government NEDO. New developments in phase 2 will be be undertaken by end of 2021 on the downstream technologies like the automated preforming and consolidation. With our new products, we want to contribute to significant weight reductions of the final products, thus improve energy efficiency while offering a cost-efficient and high-quality solution.”

Dr. Effing, CEO of AMAC GmbH confirms: „The focus on the niche of high-temperature products based on PPS and PEEK allows MaruHachi on very demanding high-end applications such as structural frames on space and aircrafts, aircraft seats or engine components etc. The tapes are fully recyclable and can be processed e.g. with high-speed with laser-based tape placement machines and robots.”

Source:

AMAC GmbH

09.02.2021

Sicomin: Collaboration with GREENBOATS® for natural fibre composite

Sicomin announces its latest collaboration with GREENBOATS® as they deliver the first ever natural fibre composite (NFC) nacelle for an offshore wind turbine.  

With more than 2.5 million tons of composite materials in use in the wind industry globally, and the first generation of wind turbines now approaching end of life, there is still a lack of well-established recycling options. GREENBOATS’ mission is to demonstrate how large-scale NFC structures in wind energy can lower energy consumption in manufacturing and significantly improve the sustainability of the composite materials used in the turbine.

In 2020, GREENBOATS was commissioned by a leading wind energy technology developer to design and manufacture a sustainable NFC nacelle. The resulting 7.3m long structure has a surface area of approximately 100m2 and was engineered by GREENBOATS to satisfy all DNV-GL load cases required for an offshore turbine nacelle, including 200km/h max wind loads and 2KN loads on the guard rails.

Sicomin announces its latest collaboration with GREENBOATS® as they deliver the first ever natural fibre composite (NFC) nacelle for an offshore wind turbine.  

With more than 2.5 million tons of composite materials in use in the wind industry globally, and the first generation of wind turbines now approaching end of life, there is still a lack of well-established recycling options. GREENBOATS’ mission is to demonstrate how large-scale NFC structures in wind energy can lower energy consumption in manufacturing and significantly improve the sustainability of the composite materials used in the turbine.

In 2020, GREENBOATS was commissioned by a leading wind energy technology developer to design and manufacture a sustainable NFC nacelle. The resulting 7.3m long structure has a surface area of approximately 100m2 and was engineered by GREENBOATS to satisfy all DNV-GL load cases required for an offshore turbine nacelle, including 200km/h max wind loads and 2KN loads on the guard rails.

Sicomin’s market leading GreenPoxy® range met these challenging engineering requirements, with the company’s recently expanded manufacturing capability also matching the potential supply volumes required by wind turbine manufacturers.  

Sicomin’s DNV-GL type approved bio-based epoxy was used to infuse BComp flax fibre reinforcements and balsa cores, with Sicomins’ intumescent weatherproof gelcoat applied on the outer surface. Cured panels were cut to shape, formed over a male plug and bonded together, before flax reinforcement plies, hand laminated with GreenPoxy resins and vacuum bagged, were added along all the panel joints lines.  Finally, Sicomin’s highly UV resistant clear coating products were used to protect and enhance the finish of the flax fibre feature stripe details.

Source:

100% Marketing

27.01.2021

Rieter: First Information on the Financial Year 2020

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

As expected, as a consequence of the economic effects of the COVID-19 pandemic, the Rieter Group closed the 2020 financial year with considerably lower sales than in the previous year. According to the first, as yet unaudited figures, total sales of CHF 573.0 million were achieved, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million).

Order Intake by Business Group
All three business groups were affected by the slump in demand in the second quarter of 2020 due to the COVID-19 pandemic. Despite the recovery in order intake in the third and fourth quarters of 2020, the weak second quarter was only partially offset.

The Business Group Machines & Systems was particularly hard hit by the effects of the pandemic, with a year-on-year decline of 35%. The Business Groups Components and After Sales each recorded a 24% reduction in order intake.*

Sales by Business Group
The exceptional market situation in 2020 gave rise to a significant decline in sales in all three business groups. Accordingly, reluctance to invest and deferred deliveries by customers caused sales in the Business Group Machines & Systems to decline by 24% compared to the previous year.

Due to COVID-19, a large number of spinning mills stopped production worldwide. This led to low demand for spare parts and wear parts, especially in the second and third quarters of 2020. Accordingly, compared to the previous year, sales in the Business Groups Components and After Sales fell by 24% and 27% respectively in the 2020 financial year.*

Sales by Region
With the exception of Turkey, all regions were affected by the low demand as a consequence of the COVID-19 pandemic.*

EBIT Margin and Net Profit
In the 2020 financial year, Rieter anticipates an EBIT margin of around -15% (2019: 11.2%) and net profit of around -16% of sales (2019: 6.9%). As of December 31, 2020, Rieter had liquid funds of exceeding CHF 280 million and unused credit lines in the mid three-digit million range.

First Half of 2021 Still Heavily Impacted by the COVID-19 Pandemic
Thanks to the improved capacity utilization, Rieter is planning short-time working in only a few areas in the first half of 2021. Nevertheless, Rieter expects sales in the first half of 2021 to be below the break-even point.*

Change to the Group Executive Committee
With effect from March 1, 2021, the Board of Directors of Rieter Holding Ltd. has appointed Roger Albrecht as Head of the Business Group Machines & Systems and a member of the Group Executive Committee.*

Annual General Meeting April 15, 2021
The 2021 Annual General Meeting of Rieter Holding Ltd. will take place in Winterthur on April 15, 2021.*


*See attached document for more information.

Source:

Rieter Management AG

Bemberg™ Natural Stretch linings by Gianni Crespi Foderami : “the preciousfabric that naturally stretches without tricks” (c) Bemberg™
Bemberg™ Natural Stretch by Gianni Crespi Foderami s.r.l
27.07.2020

Bemberg™ Natural Stretch linings by Gianni Crespi Foderami

  • “the preciousfabric that naturally stretches without tricks”

Bemberg™ Natural Stretch, the ground-breakingprecious fabric by Gianni Crespi Foderami s.r.l. is the 100% sustainable lining fabric created from a cutting-edge highly engineered process Specialized  in  the  creation  of linings for high quality menswear,   womenswear   and childrenwear,  Gianni  Crespi Foderami  s.r.l.has  teamed  up with Bemberg™, the Japanese brand of regenerated cellulose fibers by leading    materials manufacturer  Asahi  Kasei, to develop a precious 100% Bemberg™ lining with outstanding stretch performance  woven in its DNA.

  • “the preciousfabric that naturally stretches without tricks”

Bemberg™ Natural Stretch, the ground-breakingprecious fabric by Gianni Crespi Foderami s.r.l. is the 100% sustainable lining fabric created from a cutting-edge highly engineered process Specialized  in  the  creation  of linings for high quality menswear,   womenswear   and childrenwear,  Gianni  Crespi Foderami  s.r.l.has  teamed  up with Bemberg™, the Japanese brand of regenerated cellulose fibers by leading    materials manufacturer  Asahi  Kasei, to develop a precious 100% Bemberg™ lining with outstanding stretch performance  woven in its DNA.

Bemberg™ Natural    Stretch was   achieved   thanks   to the leading  Italian  manufacturer’s ability  to  vertically  set  up,  control,  engineer  and  design  a  whole  integrated  production process, ranging from sectional warping the shipment service.Bemberg™  Natural  Stretch  achieve  maximum  flexibility,  resistance,  and  comfort  without the use of elastomers and polyesters. How? The secret is in the process indeed.Elasticity is achieved thanks to a complex way of yarn twisting, weaving, and finishing.Bemberg™  yarns  are  smart,  responsible  and  high-tech.  Made  from  a  cotton  linter  bio-utility material,  the  natural  derived  source  does  not  deplete  forestry  resources. 

The company’s matchless, high-tech natural fibers are characterized by a unique touch and feel as well as unique performances such as moisture control and is antistatic.Bemberg™Natural Stretch: a smart solution for contemporary living.

Source:

GB Network

JEC World 2018 (c)AGENCE APOCOPE
Crowded aisle of JEC World 2018
08.03.2018

JEC World 2018: Composites Industry in Paris

  • JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries. “The ability of JEC Group to gather the whole composites Industry under one roof over 3 days lies in the fact that we always initiate new precursory programs to the service of composites professionals.” says Ms. Frédérique Mutel, JEC Group President & CEO. “This year we initiated new programs, for instance the Composite Challenge allowing 10 PhD students to pitch their thesis in front of the industry, thus facilitating connections between students and industrialists. In the same spirit, we increased in power our Start Up Booster and Innovation Award Programs to accelerate relations between young or innovative companies with investors or established enterprises.

  • JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries. “The ability of JEC Group to gather the whole composites Industry under one roof over 3 days lies in the fact that we always initiate new precursory programs to the service of composites professionals.” says Ms. Frédérique Mutel, JEC Group President & CEO. “This year we initiated new programs, for instance the Composite Challenge allowing 10 PhD students to pitch their thesis in front of the industry, thus facilitating connections between students and industrialists. In the same spirit, we increased in power our Start Up Booster and Innovation Award Programs to accelerate relations between young or innovative companies with investors or established enterprises. We also introduced one new planet called “Make it Real” along with the Aero, Auto and Construction planets. In this planet, we could discover astonishing futuristic products for example the Aeromobil, a flying car that would revolutionize urban transportation in the near future,“ she adds. “We launched our new Book on Natural Fibers: Flax and Hemp. We had strong communications on Composites Environmental Input and Recycling.”

The event was the first event to promote and host the new “French Fab”, a French government initiative to internationally promote the French Industry and Manufacture. Also, JEC World welcomed the French Secretary of State to the Minister of Economy and Finance Ms. Delphine Gény-Stephann, visit that demonstrates the growing role of composites in the industry.

Inspiring Keynotes to foster composites disruption

Dirk Ahlborn,CEO of Hyperloop opened the Startup Booster ceremony by supporting the spirit of ingenuity in the Industry. Dayton Horvath, industry expert and consultant in additive manufacturing presented his vision of how to apply artificial intelligence to composite Materials and Manufacturing. Finally, Yves Rossy, the “jetman” using the latest carbon-fiber wings for flight introduced the JEC Innovation awards ceremony, motivating the audience to pursue their dreams and explaining how composites could made his dreams come true.

The "Public Choice” Awards Winners

A first at the show this year was the introduction of the public votes to elect their favorite projects among two JEC programs promoting innovation. “The goal to create the “public choice awards” was to involve and embark our community to make their innovation loud. Our vision at JEC is to demonstrate and to make understand towards a broader scope the vast range of possibilities that composite materials offer.”
comments Ms. Anne-Manuèle Hébert, Director for JEC World and European Events for JEC Group.

Public Choice Award for Startup  Booster: Inca-Fiber (Germany) with 62.36% of the 2,221 votes
Public Choice Award for JEC Innovation Awards: Infusion technology for an aircraft wing by AeroComposit JSC (Russia) gaining 20.96% of the 4,126 votes.

Source:

AGENCE APOCOPE

21.02.2018

Filatura C4 is a Re.Verso™ partner of excellence

For the first time at FILO Milano, Filatura C4 is proud to present, in addition to the already established Re.Verso™ collection for contract, the Blue Drop winning fabric by Audejas, made with Re.Verso™ re-engineered wool. A result born from the shared commitment and vision to integrate a new generation of eco values into their circular economy creations.

Since 1962, Filatura C4 has been known for smart innovation in furnishing contract markets and is now specializing in the recovery of both technical and natural fibers. The company offers a wide range of styles and typologies of yarns for the Technical, Natural and Classic categories. From the choice of raw materials up until the final packaging, Filatura C4 develops and proposes, together with its partners, tailored solutions apt to satisfy a diversified demand. Thanks to its background and its grounding, Filatura C4 is a unique partner for Re.Verso™ in the contract sector.

For the first time at FILO Milano, Filatura C4 is proud to present, in addition to the already established Re.Verso™ collection for contract, the Blue Drop winning fabric by Audejas, made with Re.Verso™ re-engineered wool. A result born from the shared commitment and vision to integrate a new generation of eco values into their circular economy creations.

Since 1962, Filatura C4 has been known for smart innovation in furnishing contract markets and is now specializing in the recovery of both technical and natural fibers. The company offers a wide range of styles and typologies of yarns for the Technical, Natural and Classic categories. From the choice of raw materials up until the final packaging, Filatura C4 develops and proposes, together with its partners, tailored solutions apt to satisfy a diversified demand. Thanks to its background and its grounding, Filatura C4 is a unique partner for Re.Verso™ in the contract sector.

The collection was planned to satisfy the market’s increasingly more specific needs, which require increased specialization and responsibility in the recovery of textile fabrics. Thanks to the Re.Verso™ system, the company offers quality products with low environmental impact through the use of pre-consumer wool packaging cuts which are collected, selected and processed in an accredited, fully transparent and traceable way. The Re.Verso™ collection is mainly employed in contract and home furnishing.

The Re.Verso™ product is available in a range of counts going from 5,000 to 9,500 Nm and it can be supplied both in singles and in twisted plies.  Re.VersoTM yarns by Filatura C4 are certified by ICEA (Environmental and Ethical Certification Institute) according to GRS (Global Recycled Standard) issued by the international body Textile Exchange and can boast unique savings (in comparison to virgin wool) in terms of energy (-27%), water consumption (-53%), and CO2 emissions (-49%), as certified by the LCA (Life Cycle Assessment) study led by Prima Q.

At Filo, Filatura C4 presents the prizewinning product signed by Audejas, leading Lithuanian producer of upholstery and home textile fabrics since 1946, made for the 75% of wool (55% Re.Verso™ wool) in mix with 20% polyamide and 5% other fibres. This product received the Blue Drop Award on the second day of MoOD 2017. MoOD Brussels is an exhibition dedicated to producers of upholstery, window and wall coverings for the residential and contract market. The Blue Drop exhibition is an inspiring overview of the “best of the best” of what you can find at MoOD selected from creations submitted by exhibitors. Unique in its own way because it is the world’s only quality label of its kind for interior textiles. The “Floris” fabric by Audejas, won the first prize of the Circular Material category, being recognized as a  product that made great effort reducing waste by focusing on eco-centric materials.