From the Sector

all
Corona
Sustainable
Textile Business
Textile Machinery
Fibres, Yarns & Nonwovens
Technical Textiles
Interior Textiles
Clothing
Companies
Exhibitions & Events
Trade
Associations
People
Archive
Reset
295 results
The Dye-Max system at imogo’s new showroom in Sweden. Photo imogo
The Dye-Max system at imogo’s new showroom in Sweden.
20.10.2025

Dye-Max: Sweden’s imogo in Singapore

With a new strategic partner, its showroom now open in Sweden, and the successful commissioning of a Dye-Max spray dyeing system for a key H&M supplier in Bangladesh, imogo is looking to make a splash at next week’s ITMA Asia+CITME in Singapore.

Compared to conventional jet dyeing, impressive savings can be achieved with imogo’s Dye-Max, which is based on a series of spray cassettes with precision nozzles for accurate and consistent coverage combined with a patented pro-speed valve that controls the volume to be applied.

With a new strategic partner, its showroom now open in Sweden, and the successful commissioning of a Dye-Max spray dyeing system for a key H&M supplier in Bangladesh, imogo is looking to make a splash at next week’s ITMA Asia+CITME in Singapore.

Compared to conventional jet dyeing, impressive savings can be achieved with imogo’s Dye-Max, which is based on a series of spray cassettes with precision nozzles for accurate and consistent coverage combined with a patented pro-speed valve that controls the volume to be applied.

“The savings in treatment water the Dye-Max achieves are due to the extremely low liquor ratio of 0.5 litres per kilo of fabric,” explains imogo executive partner and board member Christian Moore. “At the same time, the low liquor ratio and the spray process require considerably less auxiliary chemistry to start with, and all of it is used in the process, which also greatly reduces the production of waste water, with only 20 litres being required for wash at changeovers. The low liquid content in the fabric meanwhile minimises the energy needed for fixation, while meeting industry quality standards and maintaining superior fabric performance.”  

The Dye-Max machine operates without the need for any changes to existing dyeing installations and employs traditional dyes suitable for application at room temperature. 

Blåkläder backing
In addition to ACG Kinna with whom it will share exhibition space in Singapore, imogo now has the support of Swedish workwear specialist Blåkläder.

With fully owned factories in Sri Lanka, Myanmar and Bangladesh, more than 8,000 employees and an annual turnover of SEK 2.7 billion, Blåkläder is one of the world’s leading manufacturers of quality workwear.

Blåkläder already uses dope dyeing, which reduces resource use in the dyeing of synthetic materials such as polyester, while imogo’s technology can also be used for natural fibres such as cotton, linen and viscose.

“Since most of the environmental impact from clothing occurs during manufacturing, it’s vital to develop methods that reduce resource consumption,” says Anders Carlsson, MD of Blåkläder. “Imogo’s groundbreaking technology addresses several of the industry’s toughest sustainability challenges and we naturally want to support that.

“Ninety percent of all the fabric we use comes from only ten carefully selected textile producers and by building long-term, trust-based relationships with them, we are well placed to influence sustainability efforts throughout the value chain.”

New showroom
Imogo’s new showroom and test centre is meanwhile now open and available for demonstrations and trials at the dyehouse of 7H Färgeri in Kinnahult, Sweden

“With this showroom, we are creating a platform for dialogue and collaboration with textile producers, brands and research partners,” says imogo CEO Joacim Wellander. “It enables visitors to see the technology in operation, understand the business impact and explore how innovation can drive transformation in their value chain.”

The facility will also serve as a knowledge hub, supporting technical training, application testing and joint development projects with partners. 

Chorka Textile
In Bangladesh, imogo has successfully installed a Dye-Max system at the plant of Chorka Textile, as part of retail giant H&M’s Green Fashion Initiative to support its key suppliers.

“The installation was handled by our own team and quality results were quickly achieved,” says Christian Moore. “This installation clearly proves that our technology is ready for the global market after years of development and fine-tuning, and working in Bangladesh taught us a lot. We look forward to discussing the opportunities that our technology can provide to mills around the world in Singapore.”

More information:
spray dyeing imogo ITMA Asia + CITME
Source:

imogo

print close
more
Photo (c) Outlast Technologies
20.10.2025

Outlast Technologies: Aersulate® Wadding thin, light and powerful

Outlast Technologies is showcasing Aersulate® Wadding - its NASA-inspired, fiber-based insulation - at PERFORMANCE DAYS Munich. Recognized among the Top Ten in the show’s Innovation Fo-rum, Aersulate® was selected from over 2,000 fabric submissions, standing out to the jury for its high thermal efficiency with low volume.

At the core of Aersulate® is aerogel - the world’s lightest solid, consisting of up to 99% air. Out-last embeds an impressive 50% by volume of aerogel directly into viscose fibers, creating an insu-lation that is exceptionally light yet extraordinarily effective.

Proven Performance
Independent lab data confirm a significant increase in thermal efficiency versus conventional solutions:

Outlast Technologies is showcasing Aersulate® Wadding - its NASA-inspired, fiber-based insulation - at PERFORMANCE DAYS Munich. Recognized among the Top Ten in the show’s Innovation Fo-rum, Aersulate® was selected from over 2,000 fabric submissions, standing out to the jury for its high thermal efficiency with low volume.

At the core of Aersulate® is aerogel - the world’s lightest solid, consisting of up to 99% air. Out-last embeds an impressive 50% by volume of aerogel directly into viscose fibers, creating an insu-lation that is exceptionally light yet extraordinarily effective.

Proven Performance
Independent lab data confirm a significant increase in thermal efficiency versus conventional solutions:

  • 35% higher RCT values in wadding
  • Up to +37% higher RCT in needlefelt applications
  • Same warmth at up to 35% less volume (no extra bulk)

Performs Under Pressure
Aersulate® Wadding delivers warmth precisely where traditional wadding loses effectiveness - under compression. Air is an excellent natural insulator, but in conventional fills it is squeezed out when pressure is applied (e.g., kneeling or sitting), causing thermal performance to drop. With an exceptionally high aerogel content - 50% by volume - Aersulate® stores air within a sta-ble, porous microstructure that keeps it from escaping. The result is consistently high insulation - even under compression and in humid conditions. From outerwear and ski apparel to technical workwear, Aersulate® reliably sustains thermal performance.

Sustainable by Design
Aersulate® Wadding unites aerogel made from quartz sand with renewable, wood-based viscose to offer a sustainable, animal-free alternative to down and conventional synthetic fills - with no compromise on performance.

“With our patent-pending fiber technology, Aersulate® redefines what textile insulation can be: thin, light, and powerful,” said Ari Pachur, Senior Business Development Manager Overseas of Outlast. “Being selected for the Top Ten out of more than 2,000 entries at PERFORMANCE DAYS is a fantastic recognition of what this technology enables.”

More information:
Outlast Technologies Performance Days Aersulate Aersulate®
Source:

Outlast Technologies

print close
more
(c) Outlast Technologies
20.10.2025

Outlast Technologies: Hochleistungsisolierung - dünn, leicht und leistungs-stark

Outlast Technologies präsentiert auf der PERFORMANCE DAYS in München seine neueste Innova-tion: Aersulate® Watte, eine NASA-inspirierte, faserbasierte Hochleistungsisolierung. Das Pro-dukt schaffte es aus mehr als 2.000 eingereichten Materialien unter die Top Ten und wird im In-novation Forum der Messe zu sehen sein. Die Jury überzeugte vor allem die außergewöhnlich hohe thermische Effizienz bei minimalem Volumen.

Herzstück der Technologie ist Aerogel – der durch einen Luftanteil von bis zu 99% leichteste Fest-stoff der Welt. Outlast gelingt es, einen beeindruckend hohen Aerogelvolumenanteil von 50 % direkt in Viskosefasern zu integrieren und schafft so eine Isolierung, die extrem leicht, dünn und gleichzeitig außergewöhnlich leistungsfähig ist.

Bestätigte Performance
Unabhängige Labortests belegen die hervorragenden Isolierwerte von Aersulate® im Vergleich zu herkömmlichen Lösungen:

Outlast Technologies präsentiert auf der PERFORMANCE DAYS in München seine neueste Innova-tion: Aersulate® Watte, eine NASA-inspirierte, faserbasierte Hochleistungsisolierung. Das Pro-dukt schaffte es aus mehr als 2.000 eingereichten Materialien unter die Top Ten und wird im In-novation Forum der Messe zu sehen sein. Die Jury überzeugte vor allem die außergewöhnlich hohe thermische Effizienz bei minimalem Volumen.

Herzstück der Technologie ist Aerogel – der durch einen Luftanteil von bis zu 99% leichteste Fest-stoff der Welt. Outlast gelingt es, einen beeindruckend hohen Aerogelvolumenanteil von 50 % direkt in Viskosefasern zu integrieren und schafft so eine Isolierung, die extrem leicht, dünn und gleichzeitig außergewöhnlich leistungsfähig ist.

Bestätigte Performance
Unabhängige Labortests belegen die hervorragenden Isolierwerte von Aersulate® im Vergleich zu herkömmlichen Lösungen:

  • +35 % höhere RCT-Werte bei Wattierungen
  • Bis zu +37 % höhere RCT-Werte in Nadelfilz-Anwendungen
  • Gleiche Wärmeleistung bei bis zu 35 % geringerem Volumen 

Leistungsstark selbst unter Druck
Aersulate® Watte überzeugt genau dort, wo herkömmliche Wattierungen an ihre Grenzen stoßen – unter Kompression. Luft ist der beste natürliche Isolator, wird jedoch in klassischen Füllmateri-alien bei Druck, etwa beim Knien oder Sitzen, herausgepresst. Das führt zu einem deutlichen Verlust an Wärmeisolierung.

Dank ihres außergewöhnlich hohen Aerogelvolumenanteils von 50 % speichern Aersulate® Watten die Luft im Inneren der Fasern, was ein Entweichen von Luft verhindert. Das Ergebnis: gleich-bleibend hohe Isolationsleistung, selbst bei Druckbelastung und in feuchten Umgebungen.

Ob in Outdoor- und Skibekleidung oder in technischer Arbeitsbekleidung - Aersulate® sorgt dort zuverlässig für konstante Isolierung, wo andere Materialien versagen.

Nachhaltigkeit neu gedacht
Die Aersulate® Wattierungen verbinden das aus Quarz (Grundstoff für Sand) gewonnene Aerogel mit nachwachsenden, holzbasierten Viskosefasern und bieten damit eine nachhaltige, tierfreie Alternative zu Daunen und herkömmlichen synthetischen Füllmaterialien – ohne Kompromisse bei der Performance einzugehen.

„Mit unserer zum Patent angemeldeten Fasertechnologie definieren die dünnen, extrem leichten Aersulate® Wattierungen die Möglichkeiten und Leistungsfähigkeit textiler Isolierung völlig neu.“, sagt Ari Pachur, Senior Business Development Manager Overseas bei Outlast. „Die Wahl unter die Top Ten aus mehr als 2.000 Einreichungen bei den PERFORMANCE DAYS ist eine fantas-tische Anerkennung für das Potenzial, das in dieser Technologie steckt.“

More information:
Aersulate® Outlast Technologies Performance Days Isolierung
Source:

Outlast Technologies GmbH

print close
more
The Three Finalists for the 2025 Hygienix Innovation Award™ (c) INDA
The Three Finalists for the 2025 Hygienix Innovation Award™
20.10.2025

The Three Finalists for the 2025 Hygienix Innovation Award™

INDA, the Association of the Nonwoven Fabrics Industry, announced the three finalists for the 2025 Hygienix Innovation Award™. These absorbent hygiene products will be presented at Hygienix™, the premier event for absorbent hygiene professionals, taking place November 17–20 at the Omni Orlando ChampionsGate, ChampionsGate, Florida. The 2025 Hygienix Innovation Award™ will be announced on Thursday, November 20th at 10:40 am.

The Award Finalists
Confitex Technology – Washable Nonwoven Sanitary Pads
Making single-use reusable:As regulators, retailers and consumers move toward a greener future, a new category of washable AHPs is creating opportunities for the nonwoven industry. Confitex Technology has created and patented world’s first washable nonwoven sanitary pads designed for sustainability and scalability without the need for SAPs. Confitex Technology is leading Innovator and Private Label supplier. Their purpose is to transform the lives of millions and reduce the Earth’s landfill by creating the ultimate reusable AHPs.

INDA, the Association of the Nonwoven Fabrics Industry, announced the three finalists for the 2025 Hygienix Innovation Award™. These absorbent hygiene products will be presented at Hygienix™, the premier event for absorbent hygiene professionals, taking place November 17–20 at the Omni Orlando ChampionsGate, ChampionsGate, Florida. The 2025 Hygienix Innovation Award™ will be announced on Thursday, November 20th at 10:40 am.

The Award Finalists
Confitex Technology – Washable Nonwoven Sanitary Pads
Making single-use reusable:As regulators, retailers and consumers move toward a greener future, a new category of washable AHPs is creating opportunities for the nonwoven industry. Confitex Technology has created and patented world’s first washable nonwoven sanitary pads designed for sustainability and scalability without the need for SAPs. Confitex Technology is leading Innovator and Private Label supplier. Their purpose is to transform the lives of millions and reduce the Earth’s landfill by creating the ultimate reusable AHPs.

Dukane – Curved Leg Elastic (CLE)
Dukane’s Curved Leg Elastic (CLE) technology redefines how elastic strands are attached in hygiene product manufacturing. By enabling ultrasonic bonding of curved elastics without any hotmelt adhesive, CLE eliminates material waste, simplifies construction, and enhances product performance. For the first time, manufacturers can seamlessly integrate curved and straight elastic strands within the same lamination using ultrasonic technology alone—a breakthrough previously thought possible only with adhesives or complex multilayer designs. CLE represents a new standard in sustainable, high-precision elastic attachment.

ZymoChem – BAYSE™
ZymoChem is a biotechnology leader revolutionizing sustainable chemical production. The company’s breakthrough product, BAYSE™, is the world’s first scalable, bio-based, microplastic-free, and biodegradable Super Absorbent Polymer.

Designed as a drop-in replacement for fossil-based SAPs, BAYSE offers a significantly lower carbon footprint while matching the performance of conventional materials and enabling seamless integration into existing manufacturing processes.  As featured earlier this year on CNBC’s “Clean Start,” this decarbonized solution is dramatically advancing the sustainability outlook for the hygiene industry.

Last year, HIRO Technologies, Inc. received the 2024 Award with its World’s First MycoDigestable Diapers—a breakthrough featuring plastic-eating mushrooms that combined excellent absorbency with sustainable, natural materials.

“Hygienix Innovation Award finalists represent the future of absorbent hygiene,” said Matt O’Sickey, PhD, INDA’s Director of Education & Technical Affairs. “These companies are pushing boundaries with solutions that address consumer needs, sustainability goals, and performance demands. Their work highlights the innovative spirit that drives our industry forward.”

Event Highlights at Hygienix™ 2025
Beyond the Innovation Award, Hygienix 2025 will deliver a powerful program of learning, networking, and collaboration, including:

  • Two Evenings of Exhibits & Receptions – Engage with leading suppliers and solution providers shaping the future of absorbent hygiene.
  • Workshops: Three workshops Monday afternoon covering absorbent hygiene systems, advances in menstrual care, and a deep dive into baby, infant, and toddler care.
  • Women in Nonwovens (WiN) Luncheon – Fostering mentorship, leadership, and collaboration across the industry.
  • Lightning Talks – Fast-paced 5-minute presentations spotlighting exhibitor innovations.
  • Lunch Around with Olivia Ahn, MD, Co-Founder of Planera – Hear her inspiring start-up journey firsthand.
  • Welcome Reception – Kick off the event with the ever-popular Welcome Reception in a relaxed, informal atmosphere Monday evening.

Featured Conference Sessions
Attendees will gain insights and strategies from sessions tackling the industry’s biggest opportunities and challenges:

  • The Illusion vs. Reality of Absorbent Hygiene Products Entrepreneurship – Overcoming Start-Up Hurdles (and Panel Discussion)
  • Economic Realities: Profit, Pressure, and Possibility
  • Panel Discussion: Servicing the Shift – Private Label as a Growth Engine
  • Finding Growth: Paws & Planet
  • Disruption Ahead: Misinformation, Regulation, and Testing in Absorbent Hygiene
  • Designed with the Consumer in Mind
  • Absorbent Hygiene Construction with Non-Traditional Inputs
  • Flushable by Design
  • Sustainable by Design
More information:
Hygienix™ 2021 Hygienix™ INDA Award
Source:

INDA

print close
more
Keeping down drier: Chemical-free and powered by gold micro-particles (c) ALLIED Feather + Down
16.10.2025

Keeping down drier: Chemical-free and powered by gold micro-particles

ALLIED Feather + Down, a global leader in high performance, responsibly sourced, and sustainably processed down, recently secured Okeo-Tex® Standard 100 Certification and bluesign® approval for their ExpeDRY Ultra Dry Down insulation. 

Designed to outperform current chemistry-intensive hydrophobic down treatments and approved for safe use by the textile sustainability authorities at Okeo-Tex and bluesign, ExpeDRY is both cleaner and better performing than standard down treatments in real world situations. It is the result of years of research into how down and moisture interact inside of an insulation chamber. 

After bringing the world’s first hydrophobic down insulation to market, ALLIED learned that these traditional chemistries not only introduce PFAS and other questionable chemistries into the environment, but also lack performance as they tend to slow evaporation and retain moisture inside jackets and sleeping bags. While the down itself stays dry, water droplets can become trapped inside the insulation chamber, slowing dry times and compromising warmth. 

ALLIED Feather + Down, a global leader in high performance, responsibly sourced, and sustainably processed down, recently secured Okeo-Tex® Standard 100 Certification and bluesign® approval for their ExpeDRY Ultra Dry Down insulation. 

Designed to outperform current chemistry-intensive hydrophobic down treatments and approved for safe use by the textile sustainability authorities at Okeo-Tex and bluesign, ExpeDRY is both cleaner and better performing than standard down treatments in real world situations. It is the result of years of research into how down and moisture interact inside of an insulation chamber. 

After bringing the world’s first hydrophobic down insulation to market, ALLIED learned that these traditional chemistries not only introduce PFAS and other questionable chemistries into the environment, but also lack performance as they tend to slow evaporation and retain moisture inside jackets and sleeping bags. While the down itself stays dry, water droplets can become trapped inside the insulation chamber, slowing dry times and compromising warmth. 

ExpeDRY uses FUZE Technologies’s unique gold micro particles to actively reduce moisture in the entire insulation chamber by slowing the formation of water droplets and speeding evaporation. Gold itself is inert, and with FUZE’s ability to control the size and shape of the particles, there is no concern over nano or cytotoxicity. And due to the minute size of the gold material, the amount needed in a common down jacket equates to roughly two grains of salt. Because of this, ALLIED is able to secure Oeko-Tex standard 100 certification and bluesign approval.

“For decades, there has been a fear of using metals to enhance performance, but this is all based on toxic, outdated, silver, zinc or copper ion release technology,” said Andrew Peterson, CTO of FUZE. “FUZE’s parent company is heavily involved in the biomedical space and its proprietary gold meta material technology aids in targeted pharmaceutical therapeutics and medical device development. By using this pharmaceutical grade material, ExpeDRY addresses all environmental and safety concerns, and we are glad to see the certifications backing this technology.” 

“As material innovation evolves and incorporates new solutions, globally recognized certifications play an increasingly important role in supporting sustainability claims and building trust with product developers and brands,” said Daniel Uretsky, President of ALLIED Feather + Down. “The Okeo-Tex Standard 100 certification and bluesign approval bring credibility to what we already know: ExpeDRY takes down, which is arguably the lowest impact insulation on the market, and elevates it to the highest performing insulation, all with less impact on the material than traditional hydrophobic chemistry.” 

ExpeDRY has been adopted worldwide by ALLIED partner brands and demand has quickly overtaken ALLIED’s own hydrophobic down treatment. Now, brands will have even more reason to adopt it. 

ALLIED will be exhibiting at Performance Days in Munich, Functional Fabric Fair in Portland , and ISPO in Munich. 

More information:
ALLIED Feather + Down ExpeDRY Ultra Dry Down insulation down and feathers thermal insulation
Source:

ALLIED Feather + Down

print close
more
(c) BW Converting
16.10.2025

New Baldwin TexChroma™ Spray Dyeing System at ITMA Asia + CITME 2025

BW Converting will preview its new Baldwin TexChroma™ digital spray dyeing system at ITMA Asia + CITME 2025 in Singapore, Oct. 28–31, 2025. This transformative solution builds on the company’s success with Baldwin TexCoat® G4 precision spray finishing system and is designed to help dyehouses achieve major reductions in energy, water, and chemical usage while improving quality and profitability.
 
“We are excited to introduce Baldwin TexChroma because spray dyeing is the future and many of our customers are already experiencing the benefits,” said Yiannis Vasilonikolos, Global Sales Leader for Textiles, BW Converting. “We have conducted successful trials of TexChroma using pigment, reactive, acid, and disperse dyes on both cotton and synthetic fibers.”
 

BW Converting will preview its new Baldwin TexChroma™ digital spray dyeing system at ITMA Asia + CITME 2025 in Singapore, Oct. 28–31, 2025. This transformative solution builds on the company’s success with Baldwin TexCoat® G4 precision spray finishing system and is designed to help dyehouses achieve major reductions in energy, water, and chemical usage while improving quality and profitability.
 
“We are excited to introduce Baldwin TexChroma because spray dyeing is the future and many of our customers are already experiencing the benefits,” said Yiannis Vasilonikolos, Global Sales Leader for Textiles, BW Converting. “We have conducted successful trials of TexChroma using pigment, reactive, acid, and disperse dyes on both cotton and synthetic fibers.”
 
According to production data to date, TexChroma can deliver savings of more than 30% in energy, dyes, and chemicals compared to continuous pad batch dyeing, and up to 50% compared to exhaust reactive dyeing. A unique feature is its ability to mix reactive dyestuffs and alkali fixation chemicals just seconds before spray application, eliminating tailing and listing - common issues that cause uneven dye application and color variation.
 
The launch of TexChroma follows the success of the Baldwin TexCoat G4 precision spray finishing system, which has seen rapid adoption worldwide for its ability to deliver 40–50% energy savings and cut water and chemical usage by half. 
 
“We believe TexChroma will be a game-changer for dyehouses, reducing costly rework and delivering the consistency this market has long been waiting for," explained Rick Stanford, Vice President of Global Business Development for Textiles, BW Converting. "The dyeing process is unforgiving, and we’ve taken a careful, deliberate approach to get it right. The market has been ready for some time, and now, so are we.”
 
BW Converting will showcase TexChroma alongside its textile finishing solutions at ITMA Asia + CITME 2025.

More information:
BW Converting ITMA Asia + CITME spray dyeing dyeing and finishing
Source:

BW Converting

print close
more
Eastman Naia™ at Textile Exxchange Conference 2025 Photo (c) Eastman
Eastman Naia™ at Textile Exxchange Conference 2025
15.10.2025

Eastman Naia™: Sustainability Progress Report and 2025-2030 Sustainability Goals

At Textile Exchange Conference 2025, Eastman Naia™ released its 2025 Sustainability Progress Report and announced its 2025-2030 Sustainability Goals, presenting a record of genuine progress and outlining a renewed roadmap for the years ahead. Rooted in transparency and measurability, the updated goals set a course through 2030 across three key priorities: mitigating climate change, mainstreaming circularity, and caring for society. These commitments reflect the very principles championed at the Textile Exchange conference. 

“We mark five years into our Naia™ sustainability goals journey with pride and humility. This update is a meaningful checkpoint documenting verifiable progress, acknowledging the work still to be done, and presenting a renewed roadmap for the years ahead,” said Ruth Farrell, General Manager of Eastman Textiles. “Most importantly, it reaffirms our unwavering commitment to sustainability, circularity and the health of our industry.”

At Textile Exchange Conference 2025, Eastman Naia™ released its 2025 Sustainability Progress Report and announced its 2025-2030 Sustainability Goals, presenting a record of genuine progress and outlining a renewed roadmap for the years ahead. Rooted in transparency and measurability, the updated goals set a course through 2030 across three key priorities: mitigating climate change, mainstreaming circularity, and caring for society. These commitments reflect the very principles championed at the Textile Exchange conference. 

“We mark five years into our Naia™ sustainability goals journey with pride and humility. This update is a meaningful checkpoint documenting verifiable progress, acknowledging the work still to be done, and presenting a renewed roadmap for the years ahead,” said Ruth Farrell, General Manager of Eastman Textiles. “Most importantly, it reaffirms our unwavering commitment to sustainability, circularity and the health of our industry.”

“We are grateful to our customers, business partners, fellow innovators, and collaborators for their trust, accountability, and continued support. Their engagement has helped drive momentum for Naia™ Renew products and advance regulations and standards for man-made cellulosic fibers (MMCF)” said Claudia de Witte, Marketing and Sustainability Director, Eastman Textiles.

“Achieving circularity at scale remains a major challenge. It requires transforming feedstock infrastructure, advancing regulation, and strengthening industry-wide collaboration. Together, we can help shape the systemic change our industry needs.” 

At Textile Exchange, Naia™ is showcasing the versatility of its sustainable fiber platform through three applications that address brand needs across performance, fashion, and circularity. Designed for light sports and urban lifestyle wear, the Naia™ On the Move blending solution builds on the exceptional performance of Naia™ Renew staple fiber. Naia™ Denim offers comfort and circularity for authentic and fashion denim, also using staple fiber formats. Meanwhile, the new Naia™ GlowNow campaign pays tribute to the classic Naia™ filament yarn, known for its exceptional comfort, easy care and style in low-impact women’s fashion.

These applications are made using Naia™ fibers sourced from sustainably managed forests. When produced with Naia™ Renew, they contain 40% GRS-certified recycled content, through Eastman’s molecular recycling technology. As these fibers demonstrate, Naia™’s sustainability strategy is not just a long-term vision, it’s already taking shape in products designed for real life. From fashion to function, from sourcing to scaling, Naia™ is proving that sustainability and style can go hand in hand.

More information:
Naia™ Renew Textile Exchange Sustainability Report Sustainable Development Goals Eastman
Source:

Eastman

print close
more
Isko Spring Summer 27 Photo (c) Isko
Isko Spring Summer 27
15.10.2025

ISKO: SS27 denim innovations at Kingpins Amsterdam

ISKO presents its SS27 collection at Kingpins Amsterdam, highlighting new developments in fabric innovation that bring together denim heritage and forward-looking design. Through unique fiber blends, summer denim is redefined by unprecedented material concepts and responsibly engineered fabrics. 
    

ISKO presents its SS27 collection at Kingpins Amsterdam, highlighting new developments in fabric innovation that bring together denim heritage and forward-looking design. Through unique fiber blends, summer denim is redefined by unprecedented material concepts and responsibly engineered fabrics. 
    

  • Mechanica: a mono-material stretch concept delivering real elasticity through construction alone, made entirely from organic and recycled cotton, without synthetics. 
  • Wondersoft: fabrics offering superior softness and comfort, crafted for a premium handfeel. 
  • Lightweights: special fiber blends combining durability and breathability for summer wear. 
  • Authentik: preserves the true denim look while adding wearability for everyday comfort. 
  • Contemporary: expressive, character-driven constructions using new slubs and twills. 
  • Expanded rigid range: new ring-spun slubs, twills, and textured constructions that enrich denim's natural depth and character. 

To meet evolving consumer demands and market trends, ISKO SS27 explores diverse thematic stories that combine heritage inspiration, contemporary style, and functional innovation: 

  • Heritage: slub-heavy fabrics inspired by '70s workwear and Japanese denim. 
  • Utility: rugged 2/1 constructions and linen wefts for authentic workwear appeal. 
  • Neo Vintage & Y2K: resinized handfeels and nostalgic washdowns for a fashion-forward statement. 
  • Sunbleached: lighter, faded tones and fresh overdyes for seasonal versatility. 

Color is a central element, with sun-faded shades in Sunbleached, grey tones such as Xenon Grey and Blue Stone, and raw, lived-in Dirty Whites. 

The collection further includes developments from ISKO™ Luxury by PG, blending advanced fabric innovation with refined design to bring denim into the luxury space. 

Finally, event-goers get to experience City Glam and D-Lite, two fabric concepts that explore a more fashion-driven approach to color and finishes, giving designers new opportunities to create expressive, contemporary denim while retaining authentic character. 

“SS27 is a clear expression of ISKO’s vision: to align creativity with market performance and sustainability,” said Tayfun Akbay, Chief Commercial Officer at ISKO. “This collection strengthens our offer to brands and designers seeking premium denim with lasting appeal: high-performing, responsibly made and rich in authentic character. Kingpins is where these ideas meet the market and where the next season’s opportunities begin.”

More information:
Isko Kingpins Amsterdam Denim Spring Summer 27
Source:

Isko

print close
more
RE&UP at Textile Exchange Conference Photo (c) RE&UP
RE&UP at Textile Exchange Conference
15.10.2025

RE&UP at Textile Exchange 2025 with circular textile solutions

RE&UP is diving into Textile Exchange Conference 2025, joining a global community of innovators, brands, and changemakers. This year’s conference theme is Shifting Landscapes: Connecting Environmental Adaptation and Systems Transformation, which explores how the fashion industry can adapt, innovate, and accelerate the shift toward circularity. 

RE&UP is a circulartech company reshaping the traditional textile-to-textile paradigm. By producing Next-Gen Cotton and Next-Gen Polyester that maintain the same performance as virgin fibers, it brings sustainable solutions to life, addressing the planet's most pressing challenges. Enriched by SANKO’s centenary knowledge in textile innovation, RE&UP creates a circular ecosystem that transforms end-of-life textile waste into high-quality raw materials at scale.

RE&UP is diving into Textile Exchange Conference 2025, joining a global community of innovators, brands, and changemakers. This year’s conference theme is Shifting Landscapes: Connecting Environmental Adaptation and Systems Transformation, which explores how the fashion industry can adapt, innovate, and accelerate the shift toward circularity. 

RE&UP is a circulartech company reshaping the traditional textile-to-textile paradigm. By producing Next-Gen Cotton and Next-Gen Polyester that maintain the same performance as virgin fibers, it brings sustainable solutions to life, addressing the planet's most pressing challenges. Enriched by SANKO’s centenary knowledge in textile innovation, RE&UP creates a circular ecosystem that transforms end-of-life textile waste into high-quality raw materials at scale.

On Day 1 of the event, Ebru Ozkucuk Guler, RE&UP’s Chief Sustainability Officer, joined the panel “Toward Impactful Textile-to-Textile Recycling Systems”, alongside Suhas Khandagale (H&M) and Cyndi Rhoades (Circle-8 Textile Ecosystems). The interactive session examined the current and future scale of feedstocks for textile-to-textile recycling, discussed legislation, sorting challenges, and explored practical solutions to accelerate circularity. 

“If we truly want to create a solution, brands must stay committed, stepping back is no longer an option,” said Ebru Ozkucuk Guler, RE&UP. “We were thrilled to share insights and explore actionable solutions with partners committed to circularity.” 

Beyond the panel, RE&UP is showcasing its pioneering circular solutions and engaging with brands and suppliers to translate sustainability commitments into measurable impact. By connecting practical solutions with policy insights and on-the-ground innovation, RE&UP is helping the industry move from theory to action, proving that circularity is not just a goal, but a tangible path forward. 

With the fashion industry facing increasing pressure to reduce waste and embrace regenerative practices, events like Textile Exchange are critical for building collaboration, sharing knowledge, and inspiring systemic change.

More information:
Textile Exchange RE&UP RE&UP Recycling Technologies panel discussion
Source:

RE&UP

print close
more
Markus Huber-Lindinger, Managing Director of EREMA, presents the new LF 812 laser filter on the EREMA stand at K 2025. Foto (c) EREMA GmbH
Markus Huber-Lindinger, Managing Director of EREMA, presents the new LF 812 laser filter on the EREMA stand at K 2025.
14.10.2025

EREMA: Laser filters further developed for high throughputs in plastics recycling

At K 2025, EREMA launches a POWERFIL brand innovation that sets new standards in melt filtration for plastics recycling. The new LF 812 high-performance filter has twice the screen surface area of the previous premium model, the LF 406, extending the series upwards. Another new feature is the integration of the proven Lock & Change system for changing screens during operation in the Endurance filter, which handles the pre-filtration of heavily contaminated input streams such as unwashed materials. 

"This latest development in our laser filter sees us take a decisive step towards meeting the growing demands for high throughputs in plastics recycling at the same time as achieving the highest quality of melt," says Markus Huber-Lindinger, Managing Director at EREMA. The 100 percent larger screen surface of the new LF 812 laser filter boosts throughput, or maintains throughput while using screens with finer filters, which is particularly advantageous for quality-driven applications. Thanks to the larger surface area of the filter, it is also possible to operate at lower pressure and with less thermal load. 

At K 2025, EREMA launches a POWERFIL brand innovation that sets new standards in melt filtration for plastics recycling. The new LF 812 high-performance filter has twice the screen surface area of the previous premium model, the LF 406, extending the series upwards. Another new feature is the integration of the proven Lock & Change system for changing screens during operation in the Endurance filter, which handles the pre-filtration of heavily contaminated input streams such as unwashed materials. 

"This latest development in our laser filter sees us take a decisive step towards meeting the growing demands for high throughputs in plastics recycling at the same time as achieving the highest quality of melt," says Markus Huber-Lindinger, Managing Director at EREMA. The 100 percent larger screen surface of the new LF 812 laser filter boosts throughput, or maintains throughput while using screens with finer filters, which is particularly advantageous for quality-driven applications. Thanks to the larger surface area of the filter, it is also possible to operate at lower pressure and with less thermal load. 

Maximum screen area, minimum space requirement
Up to 5,000 kilogrammes of melt can be filtered per hour with the single version of the new laser filter. "As a leading provider of plastics recycling machines, at EREMA we focus our experience and technical expertise on equipping large-scale systems with high-performance filtration in a compact design," says Markus Huber-Lindinger. The single version of the LF 812 laser filter covers applications with throughputs that previously required multiple filter units. "The major increase in surface area opens up new scope for system design. In many cases, this results in smaller space requirements and a more compact overall solution," adds Robert Obermayr, Product Group Manager for POWERFIL at EREMA. 

Manufactured inhouse for the highest quality and supply chain security
High-quality, high-performance filters continue to gain in importance in plastics recycling. The EREMA Group is responding to this by expanding inhouse manufacturing of filter components at 3S in Wartberg, a company that is also part of the EREMA Group. Investments in new production and heat treatment technologies increase vertical integration to ensure consistently high component quality. That is how EREMA strengthens supply chain security for customers who rely on the company's recycling systems and components.

More information:
EREMA plastic recycling Laserfilter
Source:

EREMA GmbH

print close
more
New TI Commercial Vice President Jason Kent with CEO Stephanie Dick and President Charles Wood at the association’s 2025 conference in Porto. Photo AWOL
New TI Commercial Vice President Jason Kent with CEO Stephanie Dick and President Charles Wood at the association’s 2025 conference in Porto.
14.10.2025

The Textile Institute celebrates 100 years

Fresh from its highly successful 63rd conference held in Porto, Portugal, from October 7-10, The Textile Institute (TI) will celebrate a major milestone at the ITMA Asia+CITME textile machinery exhibition in Singapore later this month.

One hundred years ago, in 1925, TI was granted its Royal Charter by King George V, transforming it from a professional association into a globally recognised chartered body, and in Singapore from October 28-31, is seeking to strengthen its international partnerships while welcoming new Corporate Members to its expanding global network.

Shared growth
TI will exhibit as a reciprocal member of the British Textile Machinery Association (BTMA), showcasing the power of collaboration and shared growth. The long-standing partnership between the two organisations has been further strengthened by the appointment of BTMA CEO Jason Kent as TI’s new Commercial Vice President, bringing fresh industry insight and influence to the role.

Fresh from its highly successful 63rd conference held in Porto, Portugal, from October 7-10, The Textile Institute (TI) will celebrate a major milestone at the ITMA Asia+CITME textile machinery exhibition in Singapore later this month.

One hundred years ago, in 1925, TI was granted its Royal Charter by King George V, transforming it from a professional association into a globally recognised chartered body, and in Singapore from October 28-31, is seeking to strengthen its international partnerships while welcoming new Corporate Members to its expanding global network.

Shared growth
TI will exhibit as a reciprocal member of the British Textile Machinery Association (BTMA), showcasing the power of collaboration and shared growth. The long-standing partnership between the two organisations has been further strengthened by the appointment of BTMA CEO Jason Kent as TI’s new Commercial Vice President, bringing fresh industry insight and influence to the role.

“Our joint presence in Singapore underlines how enduring partnerships strengthen the entire industry,” Kent says. “Corporate Membership of The Textile Institute gives organisations access to an international network of professionals, cutting-edge research and strategic benefits valued at over £10,000 a year.”

Advantages
Membership unlocks a host of advantages, including global promotion and visibility, invitations to high-level networking events and training, collaboration on industry-led research, professional recognition through chartered qualifications and access to TI’s publications, data and R&D resources.

“As the only global professional body in this sector with a Royal Charter, we are driving the industry forward through high-quality events and training courses that equip professionals for the future,” says TI CEO Stephanie Dick. “Together with our Corporate Members, we’re tackling skills gaps, developing practical training solutions and reaching international audiences.”

New industries
“This is an exciting time for the industry, especially with the major opportunities being opened up in new technical textiles for rising industries such as energy and data storage, future mobility and advanced infrastructure,” adds TI President Charles Wood. “Whether you’re a multinational manufacturer or a fast-growing SME, TI offers a neutral, not-for-profit platform where your voice is heard and your ambitions are supported. As we expand our influence across Asia and beyond, we’re inviting new Corporate Members to join us, benefit from our resources and help shape the Institute with their expertise.”

The Textile Institute is ideally positioned to help organisations stay competitive, connected and compliant. From its first foundation in Manchester in 1910, its approach has always been to be “not of Manchester, but international”, and with sections and special interest groups active across the globe, it now serves members in over 60 countries, empowering professionals across every link in the textile supply chain. 

“We are looking forward to exploring new possibilities with as many forward-looking companies as possible at this year’s ITMA Asia+CITME,” concludes Jason Kent.

More information:
The Textile Institute ITMA Asia + CITME British Textile Machinery Association
Source:

AWOL

print close
more
Reifenhäuser wins German Design Award for new user interface Bild: HMI Project
Reifenhäuser wins German Design Award for new user interface
13.10.2025

Reifenhäuser wins German Design Award for new user interface

At K 2025 in Duesseldorf, the Reifenhäuser Group unveiled its new company-wide machine user interface, which offers a uniform design language for blown film, flat film, and nonwoven lines, as well as particularly simple operation. The overall concept impressed not only customers, but also the jury of the German Design Awards, who honored the system with the prestigious design award during the trade fair.

In times of a growing global shortage of skilled workers, the simple and intuitive operation of production equipment is a decisive success factor. That is why Reifenhäuser has completely redesigned its human-machine interface (HMI) and introduced a completely new, visually appealing, and responsive solution. It combines the highly complex and heterogeneous requirements of different extrusion machines in a flexible and scalable system. Reifenhäuser will be showcasing the new HMI at its open house during the K trade fair on its new EVO GEN3 and EVEREX blown film and flat film lines. 

At K 2025 in Duesseldorf, the Reifenhäuser Group unveiled its new company-wide machine user interface, which offers a uniform design language for blown film, flat film, and nonwoven lines, as well as particularly simple operation. The overall concept impressed not only customers, but also the jury of the German Design Awards, who honored the system with the prestigious design award during the trade fair.

In times of a growing global shortage of skilled workers, the simple and intuitive operation of production equipment is a decisive success factor. That is why Reifenhäuser has completely redesigned its human-machine interface (HMI) and introduced a completely new, visually appealing, and responsive solution. It combines the highly complex and heterogeneous requirements of different extrusion machines in a flexible and scalable system. Reifenhäuser will be showcasing the new HMI at its open house during the K trade fair on its new EVO GEN3 and EVEREX blown film and flat film lines. 

The operator can access every setting with a maximum of two clicks and, thanks to customizable dashboards and a clearly laid out start-up page, retains control over the entire extrusion process at all times. The intelligent color concept and the intuitive, responsive touch interface significantly speed up operation.

The new development was carried out in collaboration with HMI Project, a renowned agency specializing in human-machine interfaces (HMI). The new HMI was developed with a focus on people in order to simplify everyday operation of complex machines. In a user-centered process, real-life usage scenarios were analyzed and validated through usability tests. The result is a modular, scalable, and extremely flexible interface that combines technical complexity and user-friendliness at the highest level. Assistance systems, informative illustrations, and a clear visual hierarchy support the operator in setting up, monitoring, and optimizing sensitive production processes. 

The German Design Award is one of the most prestigious awards in the design landscape. Since 2012, the award has identified significant design trends, made them visible, and honored them. Every year, outstanding work in the fields of product design, communication design, and architecture is recognized.

More information:
Reifenhäuser German Design Award User Interface Human Maschine Interfaces Extrusion Systems
Source:

Reifenhäuser Gruppe

print close
more
Source Fashion Catwalkk (c) Source Fashion
13.10.2025

Catwalk Partnership: Source Fashion & Redress

Source Fashion, the UK’s leading responsible sourcing show, announced Redress as the headline catwalk partner for its return to Olympia London from 13–15 January 2026, spotlighting pioneering designers who are reshaping fashion through circular and sustainable design.

The Source Fashion Catwalk will take place three times daily, showcasing responsibly produced collections, trend-led designs, and cutting-edge innovation. Each show will present a compelling story of sustainability in practice, inspiring buyers with practical ideas they can implement directly from the show floor.

Based in Hong Kong, Redress is an Asia-focused environmental NGO on a mission to accelerate the transition to a circular fashion industry by educating and empowering designers and consumers to reduce clothing’s negative environmental impacts. In response to fashion’s unsustainable linear model of ‘take, make, use, and waste,’ Redress champions a circular economy that takes responsibility for a product’s entire lifecycle and its impact on the planet.

Source Fashion, the UK’s leading responsible sourcing show, announced Redress as the headline catwalk partner for its return to Olympia London from 13–15 January 2026, spotlighting pioneering designers who are reshaping fashion through circular and sustainable design.

The Source Fashion Catwalk will take place three times daily, showcasing responsibly produced collections, trend-led designs, and cutting-edge innovation. Each show will present a compelling story of sustainability in practice, inspiring buyers with practical ideas they can implement directly from the show floor.

Based in Hong Kong, Redress is an Asia-focused environmental NGO on a mission to accelerate the transition to a circular fashion industry by educating and empowering designers and consumers to reduce clothing’s negative environmental impacts. In response to fashion’s unsustainable linear model of ‘take, make, use, and waste,’ Redress champions a circular economy that takes responsibility for a product’s entire lifecycle and its impact on the planet.

At the heart of its work is the Redress Design Award, a leading sustainable fashion design competition, which has built a global network of over 300 emerging designers pioneering circular and waste-reducing practices. This makes Redress an ideal partner for Source Fashion, as both organisations share a commitment to innovation, education, and driving real-world change in the fashion industry. Together, they are empowering the next generation of designers to reshape fashion’s future through creativity and responsibility.

For Source Fashion January 2026, Redress will select two to three Redress Design Award alumni to headline the catwalk. Their curated showcase will highlight innovation, circular design thinking, and a strong commitment to reducing environmental impact. The dynamic catwalk will run three times a day, offering a visual narrative of how responsible design and creative excellence can join forces to redefine the future of fashion.

“This partnership with Redress marks an exciting next chapter for the Source Fashion catwalk,” says Suzanne Ellingham, Director of Source Fashion. “Redress has been instrumental in nurturing some of the most forward-thinking designers working in sustainability today. Their alumni are proof that creativity and responsibility are not opposing forces, they’re the foundation of fashion’s future. By bringing their work to our stage, we’re giving buyers and brands a glimpse of what truly circular design can look like in practice.”

Christina Dean, Founder of Redress, “Our partnership with Source Fashion creates the perfect stage to show that sustainable fashion isn’t just a passing trend, it’s the future. By putting our Redress Design Award alumni in the spotlight, we’re proving that circular design can be innovative, beautiful, and commercially viable. This partnership is about inspiring the industry and showing that responsibility and creativity go hand in hand.”

More information:
Source Fashion Redress partnership catwalk
Source:

Source Fashion

print close
more
PRINT DIGITAL CONVENTION Credit: Messe Düsseldorf Constanze Tillmann
PRINT DIGITAL CONVENTION
13.10.2025

Netzwerk der PRINT DIGITAL CONVENTION 2026 wächst

Mit dem European Brand & Packaging Design Association (epda) und dem Verband Druck + Medien Nord-West (VDM Nord-West) wächst das Partnernetzwerk der PRINT DIGITAL CONVENTION 2026. Die neuen Kooperationen bringen frische Impulse, erweitern die Reichweite und stärken die Attraktivität der PDC als Plattform für Austausch, Innovation und neue Geschäftspotenziale. Am 16. und 17. Juni 2026 lädt die Kongressmesse Macherinnen und Macher aus der Print-, Medien- und Kommunikationsbranche ins Foyer der Halle 1 auf dem Düsseldorfer Messegelände ein. 

Zukunftsgerichtete Kooperationen stärken das Profil der PDC
Mit der epda, dem führenden europäischen Netzwerk für Packaging-Design, und dem VDM Nord-West, einem der größten Regionalverbände der Druck- und Medienbranche, gewinnt die PRINT DIGITAL CONVENTION zwei Partner, die Kreativität, Branchenkompetenz und starke Netzwerke einbringen. Die Kooperationen erweitern das thematische Spektrum der Messe, stärken die fachliche Relevanz und setzen ein klares Zeichen für interdisziplinäre Zusammenarbeit.

Mit dem European Brand & Packaging Design Association (epda) und dem Verband Druck + Medien Nord-West (VDM Nord-West) wächst das Partnernetzwerk der PRINT DIGITAL CONVENTION 2026. Die neuen Kooperationen bringen frische Impulse, erweitern die Reichweite und stärken die Attraktivität der PDC als Plattform für Austausch, Innovation und neue Geschäftspotenziale. Am 16. und 17. Juni 2026 lädt die Kongressmesse Macherinnen und Macher aus der Print-, Medien- und Kommunikationsbranche ins Foyer der Halle 1 auf dem Düsseldorfer Messegelände ein. 

Zukunftsgerichtete Kooperationen stärken das Profil der PDC
Mit der epda, dem führenden europäischen Netzwerk für Packaging-Design, und dem VDM Nord-West, einem der größten Regionalverbände der Druck- und Medienbranche, gewinnt die PRINT DIGITAL CONVENTION zwei Partner, die Kreativität, Branchenkompetenz und starke Netzwerke einbringen. Die Kooperationen erweitern das thematische Spektrum der Messe, stärken die fachliche Relevanz und setzen ein klares Zeichen für interdisziplinäre Zusammenarbeit.

Raum für Innovation und Geschäft
Mit rund 1.000 Quadratmetern Ausstellungsfläche, einem hochwertig kuratierten Kongressprogramm und innovativen Multichannel-Formaten bleibt die PRINT DIGITAL CONVENTION 2026 Impulsgeberin der Branche. Die neuen Partnerschaften verstärken Reichweite, Themenvielfalt und Marktzugang – und bieten Ausstellern beste Chancen, sich in einem zukunftsrelevanten Umfeld wirkungsvoll zu präsentieren.

Die PRINT DIGITAL CONVENTION findet vom 16. bis 17. Juni 2026 in Düsseldorf statt und wird vom Fachverband Medienproduktion (FMP) in Partnerschaft mit der Messe Düsseldorf, der drupa, veranstaltet. 

 

More information:
European Brand & Packaging Design Association Verband Druck + Medien Nord-West PRINT DIGITAL CONVENTION
Source:

Messe Düsseldor

print close
more
GREENEXT Expo 2025 Photo GREENEXT Expo 2025
GREENEXT Expo 2025
10.10.2025

GREENEXT Expo 2025: Sustainability as Actionable Business Strategy

The landmark event, attended by 5,022 professionals, confirms the global shift from why to how, driving cross-sector collaboration across 120+ enterprises and 200+ case studies. GREENEXT Expo is an integrated platform dedicated to driving sustainability transformation. Through exhibitions, summits, and international exchange, the Expo fosters a collaborative innovation network connecting business leaders, policymakers, investors, innovators, and consumers to achieve triple wins across economic, environmental, and social dimensions.

The GREENEXT Expo 2025 successfully concluded on September 27 at the Shanghai Exhibition Center, solidifying its position as one of the most influential annual platforms for sustainability transformation in China and beyond. Positioned as China's leading greening initiative and accelerator platform, the two-day event focused on the core pillars of Sustainability Innovation × Cross-Sector Collaboration × Business, welcoming 5,022 attendees and bringing together over 120 leading global enterprises and organizations.

The Expo’s central theme was the execution of sustainable practice, moving decisively beyond abstract discourse.

The landmark event, attended by 5,022 professionals, confirms the global shift from why to how, driving cross-sector collaboration across 120+ enterprises and 200+ case studies. GREENEXT Expo is an integrated platform dedicated to driving sustainability transformation. Through exhibitions, summits, and international exchange, the Expo fosters a collaborative innovation network connecting business leaders, policymakers, investors, innovators, and consumers to achieve triple wins across economic, environmental, and social dimensions.

The GREENEXT Expo 2025 successfully concluded on September 27 at the Shanghai Exhibition Center, solidifying its position as one of the most influential annual platforms for sustainability transformation in China and beyond. Positioned as China's leading greening initiative and accelerator platform, the two-day event focused on the core pillars of Sustainability Innovation × Cross-Sector Collaboration × Business, welcoming 5,022 attendees and bringing together over 120 leading global enterprises and organizations.

The Expo’s central theme was the execution of sustainable practice, moving decisively beyond abstract discourse.

Actionable Solutions Across Six Strategic Zones
GREENEXT 2025 presented over 200 scalable solutions across six dedicated thematic zones, emphasizing practical applications in key areas:

  • Fashion Forward: Showcased circular economy models for textiles, featuring solutions from global brands like adidas and the Ellassay Group.
  • Living Earth: Focused on the regenerative connection between nature and commerce, highlighting transparent "field to bottle" supply chains with exhibitors such as The Macallan.
  • Green for Next: Addressed corporate resilience, covering ESG disclosure, carbon auditing, and low-carbon manufacturing with contributors like HKRI Taikoo Hui and Tencent CarbonXmade.

The event also sharpened its focus on four critical commercial scenarios: Urban Regeneration (ESG-driven circularity), Global Expansion (supply chain trust and compliance), Technological Innovation (youth and startup creativity), and embedding Public Good for long-term competitiveness.

Global Dialogue and the New Aesthetic of Value
The conference program served as a cornerstone, convening 183 global experts in 77 sessions. The international scope was amplified by remarks from diplomatic representatives of European nations, including Finland, Norway, Belgium, and Denmark, fostering essential Global Collaboration on regulatory and market challenges.

Key takeaways from the dialogue included the redefinition of premium commerce through sustainability:
“The Third Aesthetic of Commercial Spaces: Making Sustainability the New Luxury,”
— Ms. Ruifang Ding, Co-General Manager of HKRI Taikoo Hui

Commitment to Future Talent and Philanthropy
The Expo served as a launchpad for future-focused initiatives, including:

  • The establishment of the Shanghai Population Welfare Foundation Sustainable Development Fund, promoting the integration of philanthropy and corporate social responsibility.
  • The official release of the Youth Action Guide for Sustainable Development at the Innovation Hub, designed to mobilize the next generation of innovators.
  • The recognition of industry leaders at the Global Sustainable Fashion Consumption Industry Pioneer Awards Ceremony.

Public engagement was driven by the "Sustainable Journey," an immersive route that featured interactive activities like the Climate Fresk workshop and the Recycled Plastic Workshop, ensuring that sustainability concepts were translated into tangible, hands-on experiences for consumers.

GREENEXT Expo 2025 successfully confirmed that the pursuit of sustainability is the essence of new productive forces, driving synergy between economic prosperity and ecological benefit. Preparations for GREENEXT Expo 2026 are already underway, promising to further expand its global reach and deepen its impact.

More information:
GREENEXT Shanghai strategy
Source:

GREENEXT Expo 2025

print close
more
Von links: Muhammad Al Husseini, Bernd Jablonowski (Messe Düsseldorf), Albert Aoun (REC), Marius Berlemann (Messe Düsseldorf), HRH Prinz Saud Turki Al Faisal Bin Abdulaziz (Chairman REC), Wolfram Diener (Messe Düsseldorf), Petra Cullmann (Messe Düsseldorf), Dr. Akram Masri (REC). (c) Messe Düsseldorf GmbH
Von links: Muhammad Al Husseini, Bernd Jablonowski (Messe Düsseldorf), Albert Aoun (REC), Marius Berlemann (Messe Düsseldorf), HRH Prinz Saud Turki Al Faisal Bin Abdulaziz (Chairman REC), Wolfram Diener (Messe Düsseldorf), Petra Cullmann (Messe Düsseldorf), Dr. Akram Masri (REC).
10.10.2025

Messe Düsseldorf: Strategische Partnerschaft zur Expansion nach Saudi-Arabien

Königlicher Besuch auf der K 2025: Seine Königliche Hoheit Prinz Saud Turki Al-Faisal Al Saud, Vorsitzender der Riyadh Exhibitions Company (REC), hat gemeinsam mit Wolfram N. Diener, Vorsitzender der Geschäftsführung der Messe Düsseldorf, einen weiteren Meilenstein in der engen Zusammenarbeit beider Partner gesetzt. Im Rahmen der Kunststoff- und Kautschukmesse K 2025 bekräftigten beide Seiten mit einem offiziellen Handschlag ihre strategische Kooperation.

Der Handschlag markiert einen weiteren Meilenstein in der internationalen Expansion der Weltleitmessen K, interpack und drupa nach Saudi-Arabien. Dort lässt sich derzeit beobachten, wie dynamisch und vielschichtig sich die Wirtschaft des Mittleren Ostens entwickelt. Die Riyadh Exhibitions Company veranstaltet dort vom 12. bis 15. April 2026 die Fachmessen Saudi Plastics & Petrochem und Saudi Print & Pack mit über 500 ausstellenden Unternehmen aus den Bereichen Petrochemie, Kunststoff-, Druck- und Verpackungsindustrie. Dieses stark wachsende Messequartett, dessen Ausstellerzahl seit 2018 um rund 70 Prozent gestiegen ist, bietet ideale Anknüpfungspunkte für die Messe Düsseldorf. 

Königlicher Besuch auf der K 2025: Seine Königliche Hoheit Prinz Saud Turki Al-Faisal Al Saud, Vorsitzender der Riyadh Exhibitions Company (REC), hat gemeinsam mit Wolfram N. Diener, Vorsitzender der Geschäftsführung der Messe Düsseldorf, einen weiteren Meilenstein in der engen Zusammenarbeit beider Partner gesetzt. Im Rahmen der Kunststoff- und Kautschukmesse K 2025 bekräftigten beide Seiten mit einem offiziellen Handschlag ihre strategische Kooperation.

Der Handschlag markiert einen weiteren Meilenstein in der internationalen Expansion der Weltleitmessen K, interpack und drupa nach Saudi-Arabien. Dort lässt sich derzeit beobachten, wie dynamisch und vielschichtig sich die Wirtschaft des Mittleren Ostens entwickelt. Die Riyadh Exhibitions Company veranstaltet dort vom 12. bis 15. April 2026 die Fachmessen Saudi Plastics & Petrochem und Saudi Print & Pack mit über 500 ausstellenden Unternehmen aus den Bereichen Petrochemie, Kunststoff-, Druck- und Verpackungsindustrie. Dieses stark wachsende Messequartett, dessen Ausstellerzahl seit 2018 um rund 70 Prozent gestiegen ist, bietet ideale Anknüpfungspunkte für die Messe Düsseldorf. 

Die neue Präsenz in Riad ergänzt das bestehende Auslandsportfolio der Messe Düsseldorf – im Bereich Kunststoff und Kautschuk mit der „K Alliance“, im Segment Processing und Packaging mit der „interpack alliance“ sowie im Bereich Print Technologies mit der „drupa alliance“. Ziel der Partnerschaft ist es, an der wachsenden wirtschaftlichen Dynamik im Mittleren Osten aktiv zu partizipieren. Bereits im Frühjahr 2025 hatten beide Partner ihre strategische Zusammenarbeit mit einem Memorandum of Understanding offiziell dokumentiert. 

Zahlreiche Anknüpfungspunkte für das Düsseldorfer Messeportfolio
Wolfram N. Diener, Vorsitzender der Geschäftsführung der Messe Düsseldorf, hebt die Bedeutung dieser Entscheidung hervor: „Wir sind zur richtigen Zeit am richtigen Ort. Mit unserem Engagement in einem Messemarkt, der weltweit am schnellsten wächst, stärken wir unsere Position als eine der international erfolgreichsten Messegesellschaften. Saudi-Arabien und die Vereinigten Arabischen Emirate stellen ihre Wirtschaft immer vielfältiger auf – dadurch ergeben sich zahlreiche Anknüpfungspunkte für unser breites Messeportfolio und neue Potenziale für unsere Kunden.“ Dass die wirtschaftliche Transformation der Region zunehmend internationale Aufmerksamkeit erfährt, zeigte sich auch im hochrangigen Besuch: Seine Exzellenz Bandar bin Ibrahim Al-Khorayef, Minister für Industrie und Bodenschätze Saudi-Arabiens, besucht aktuell die K 2025. Bereits im letzten Jahr hatte er sich auf der drupa 2024 ein Bild vom internationalen Messegeschehen in Düsseldorf gemacht.

Hohes Wirtschaftswachstum im Mittleren Osten
Das spiegelt sich in den Wirtschaftsdaten der Staaten des Gulf Cooperation Council (GCC) wider. Deren jährliche Wachstumsrate von sechs Prozent bis 2029 übertrifft dem Beratungsunternehmen jwc zufolge sowohl die der EU (3%) als auch den weltweiten Durchschnitt (5%). 

Auf bestehender Stärke aufbauen: bisherige Schritte in der Region
Bei den aktuellen Neugeschäftsaktivitäten handelt es sich nicht um die ersten Schritte der Messe Düsseldorf in der Region. Seit 2007 besteht eine erfolgreiche Partnerschaft der K mit der ArabPlast in Dubai. Seit 2019 treibt die Messe Düsseldorf ihr Geschäft unter anderem mit den interpack alliance Messen pacprocess MEA und der Food Africa Cairo in Ägypten voran – dem Bindeglied zwischen dem Mittleren Osten und Afrika. Seit 2024 ergänzt außerdem eine neue Tochtergesellschaft das globale Netzwerk der Messe Düsseldorf – in der Türkei, die die Brücke zwischen Europa und dem Mittleren Osten schlägt. Die Offensive in Saudi-Arabien ist nun der nächste folgerichtige Schritt. 

More information:
Messe Düsseldorf Saudi-Arabien Mittlerer Osten
Source:

Messe Düsseldorf GmbH

print close
more
Photo (c) CIBUTEX 2025
08.10.2025

Cibutex Event: WORKING ON CHANGE

Cibutex, the Dutch/European circularity organisation for business textiles, held its annual Fall Event on October 1 in Amsterdam. Cibutex, set up by 5 textile management companies in 2022, today is a representation of a wide spectrum of companies from the business textile industry. It currently has around 50 members, located all over Europe. 
 
Like Cibutex itself, the day was not at all like the average corporate congress. Expert speakers presented their view and knowledge of some complex issues, like the upcoming EPR laws and the situation of the textile recycling industry. The day’s theme ‘Working on Change’ was implemented litterally during the day: the 70 visitors to the event got actively involved in the discussions and expert panels. Together they worked on the future of Cibutex, as a driver of change in the world of industrial textiles. 
 

Cibutex, the Dutch/European circularity organisation for business textiles, held its annual Fall Event on October 1 in Amsterdam. Cibutex, set up by 5 textile management companies in 2022, today is a representation of a wide spectrum of companies from the business textile industry. It currently has around 50 members, located all over Europe. 
 
Like Cibutex itself, the day was not at all like the average corporate congress. Expert speakers presented their view and knowledge of some complex issues, like the upcoming EPR laws and the situation of the textile recycling industry. The day’s theme ‘Working on Change’ was implemented litterally during the day: the 70 visitors to the event got actively involved in the discussions and expert panels. Together they worked on the future of Cibutex, as a driver of change in the world of industrial textiles. 
 
If the event proved one thing, it is that a lot of work needs to be done. Further cooperation among members, connections to other industries facing similar challenges and more and better services for the Cibutex members are some of the topics that will be worked on in the near future. At the same time, the Cibutex Team has already started the preparations for the Spring 2026 Event. 

More information:
CIBUTEX circularity business textiles Extended Producer Responsibility
Source:

CIBUTEX 

print close
more
Radio frequency drying Photo Strayfield
Radio frequency drying
07.10.2025

Demonstrating total control with UK technologies

As a leader in colour measurement and management solutions, Verivide will showcase its latest DigiEye imaging system at the forthcoming ITMA Asia + CITME exhibition in Singapore from October 28-31.

This benefits from 100% LED illumination, improving the accuracy of colour assessments while supporting environmentally responsible practices in colour management.

Designed for efficiency and reliability, the DigiEye includes integrated dust filtration and a fully enclosed camera for added security. 

Unlike its predecessor, the new DigiEye no longer requires annual fluorescent lamp changes, thanks to its 100% LED light source. The system also includes software-integrated lighting controls and lighting geometry checking, enhancing its precision and ease of use. Additionally, it now has the ability to auto-capture images upon door closure, making it ideal for imaging multiple samples quickly and efficiently.

The new DigiEye offers significant upgrades, including a 67% larger imaging area and a 112% larger measurement area. Its drawer load rating has increased by 55%, and the LED light source lasts ten time longer than before. 

As a leader in colour measurement and management solutions, Verivide will showcase its latest DigiEye imaging system at the forthcoming ITMA Asia + CITME exhibition in Singapore from October 28-31.

This benefits from 100% LED illumination, improving the accuracy of colour assessments while supporting environmentally responsible practices in colour management.

Designed for efficiency and reliability, the DigiEye includes integrated dust filtration and a fully enclosed camera for added security. 

Unlike its predecessor, the new DigiEye no longer requires annual fluorescent lamp changes, thanks to its 100% LED light source. The system also includes software-integrated lighting controls and lighting geometry checking, enhancing its precision and ease of use. Additionally, it now has the ability to auto-capture images upon door closure, making it ideal for imaging multiple samples quickly and efficiently.

The new DigiEye offers significant upgrades, including a 67% larger imaging area and a 112% larger measurement area. Its drawer load rating has increased by 55%, and the LED light source lasts ten time longer than before. 

As part of the VeriVide ecosystem, the DigiEye integrates seamlessly with UltraView, VisionView and the VeriVide Portal, offering a comprehensive solution for all colour management needs. 

Abrasion and pilling testing 
Martindale testing needs little introduction to textile manufacturers, being well established as the industry standard for abrasion and pilling testing since its initial development and introduction by James Heal back in the 1940s.

For 2025, however, James Heal’s development team have taken a fresh look at this classic instrument and the result is the new Martindale Motion.
This redesigned nine-station Martindale instrument with individual lifting heads now offers the flexibility to run each station independently for carrying out different textile tests simultaneously.

Multiple textiles can be tested at the same time through to conclusion without intervention. Once set up, the Martindale Motion can be left running with the sample holders automatically lifting at the required evaluation points, freeing up the operator’s time to do other work without the need to return until the abrasion or pilling test is fully completed, including overnight.

Each sample is kept in-tact at the end point for evaluation and checking, reducing queries on grading and the potential need for re-testing. Further refinements include a new hinged access to change the self-aligning drive pins, allowing quick and safe switching between tests.

Designed and manufactured in the UK, the James Heal Martindale range has seen numerous updates, models and innovations over the years, such as touchscreen and user-friendly software, best-in-class safety features combined with the signature near silent running of this staple lab instrument. Added to this have been the introduction of the DurAbrasion multi-function testing machine, later followed by the market-leading evolution, the AquAbrasion wet abrasion tester launched in 2019.

The Martindale Motion, however, is now taking productivity and efficiency to a higher level than ever before.

Radio frequency drying
Total control of textile drying is meanwhile enabled with the advanced radio freqency (RF) technology of Strayfield, which has over 4,000 installations worldwide and provides solutions tailored to diverse textile applications such as cotton, wool, polyester, nylon, silk, acrylic and speciality blends.

Strayfield technology enables consistent quality, superior output and sustainability benefits through gentle and uniform drying, ensuring even results and moisture removal across entire batches and preserving fibre integrity, colour vibrancy and softness without yellowing or shrinkage.
Adaptive electrodes regulate power delivery according to product height and moisture, maximising efficiency and eliminating energy waste and unlike conventional rod systems, Strayfield’s full-area plates deliver consistent energy density for gentle drying without hotspots.

More information:
BTMA ITMA Asia + CITME colour measurement drying system pilling
Source:

AWOL for BTMA

print close
more
(c) Koji Hirano
07.10.2025

Kyocera Supported Production of Collections at Paris Fashion Week Spring/Summer 2026

Kyocera Document Solutions Inc. supported the production of dresses using artworks painted by artists contracted to HERALBONY for ANREALAGE’s Collection at Paris Fashion Week SS 2026, held on September 30, 2025. The collection comprised 30 outfits, 26 of which used fabrics printed with our sustainable inkjet textile printer "FOREARTH". For this collection, 21 vibrant designs by 18 artists contracted to HERALBONY were printed onto wide range of fabrics and, through ANREALAGE’s craftmanship, transformed into distinctive garments that conveyed movement and vitality. FOREARTH printing was used for bags and shoes, giving their designs an inner glow that attracted significant attention.

Kyocera Document Solutions Inc. supported the production of dresses using artworks painted by artists contracted to HERALBONY for ANREALAGE’s Collection at Paris Fashion Week SS 2026, held on September 30, 2025. The collection comprised 30 outfits, 26 of which used fabrics printed with our sustainable inkjet textile printer "FOREARTH". For this collection, 21 vibrant designs by 18 artists contracted to HERALBONY were printed onto wide range of fabrics and, through ANREALAGE’s craftmanship, transformed into distinctive garments that conveyed movement and vitality. FOREARTH printing was used for bags and shoes, giving their designs an inner glow that attracted significant attention.

Works by artists contracted to HERALBONY are characterized by both intricate, delicate expressions and bold, powerful strokes. In the printing process for this garment production, our FOREARTH faithfully reproduced those artistic expressions. Moreover, features unique to each artwork—such as variations in brush pressure and brushstroke—along with subtle differences in hue and tonal gradation were recreated through precise ink-volume adjustments made possible by digital technology, allowing FOREARTH to play a significant role in this production.

„Seeing printed fabrics from Kyocera’s sustainable inkjet textile printer, FOREARTH, moved me“, said HERALBONY’s designers Takaya Matsuda and Fumito. „The printer reproduces the nuance in the artists’ brushwork—the subtle breaks, dynamism, and life—directly onto fabric. It felt as if the works were truly imprinted on society. We believe this is meaningful for the artists, their families, and the welfare communities supporting them.“

FOREARTH reduces water usage by 99.98%*1. This is significant for the resource- and water-intensive textile and apparel industry. We will continue to work with Kyocera to introduce and scale a model that protects artistic integrity while helping to solve environmental challenges. 

More information:
Kyocera Kyocera Document Solutions Paris Fashion Week artwork inkjet digital printer
Source:

Kyocera

print close
more
Ihr Jubiläum feiert die EuroShop 2026 mit einem „Global Retail Festival“ Credit: Messe Düsseldorf, C. Tillmann
Ihr Jubiläum feiert die EuroShop 2026 mit einem „Global Retail Festival“
07.10.2025

Hohe Beteiligung an der EuroShop 2026

Fünf Monate vor der EuroShop 2026 ist der Zuspruch in der Ausstellerschaft sehr positiv. Obwohl die wirtschaftliche Lage im Handel derzeit herausfordernd und von Umbrüchen geprägt ist, haben sich viele Aussteller frühzeitig zur Teilnahme entschlossen. Besonders stark ist der Zuspruch in den Bereichen Food Service Equipment, Retail Technology, Refrigeration & Energy Management sowie Expo & Event.

Fünf Monate vor der EuroShop 2026 ist der Zuspruch in der Ausstellerschaft sehr positiv. Obwohl die wirtschaftliche Lage im Handel derzeit herausfordernd und von Umbrüchen geprägt ist, haben sich viele Aussteller frühzeitig zur Teilnahme entschlossen. Besonders stark ist der Zuspruch in den Bereichen Food Service Equipment, Retail Technology, Refrigeration & Energy Management sowie Expo & Event.

Nächstes Jahr trifft sich die internationale Handelswelt bereits zum 22. Mal in Düsseldorf und feiert einen besonderen Geburtstag: Die EuroShop wird 60 Jahre alt. Seit ihrer Premiere im Jahr 1966 hat sich die Messe zur global führenden Plattform für die Retail-Welt entwickelt, die alle drei Jahre Fachbesucherinnen und -besucher aus der ganzen Welt anzieht. Für Entscheidungsträger aus dem Handel, Architektur- und Designbüros, Ladenbau und -planung ist sie ein Pflichttermin, der einen Blick in die Zukunft des Einkaufens ermöglicht. Vom 22. bis 26. Februar 2026 feiert The World´s No.1 Retail Trade Fair wieder die aktuellsten Retail Innovationen und natürlich auch ihr Jubiläum mit einem „Global Retail Festival“. Fachbesuchende aus der ganzen Welt werden vom 22. bis 26. Februar 2026 in Düsseldorf am Rhein erwartet. Rund 1.900 Aussteller aus über 60 Nationen werden ihre Lösungen und Produkte auf einer Ausstellungsfläche mehr als 100.000 Netto-Quadratmetern in insgesamt 14 Messehallen präsentieren.

In sieben Erlebnisdimensionen zeigt die EuroShop die Bandbreite an Innovationen, die den Handel von morgen bewegen. Die Dimensionen spiegeln die vielfältigen Disziplinen wider, die den Retail spannend und attraktiv machen: Shopfitting & Store Design ist das Herzstück und die größte der Dimensionen: Rund 450 Aussteller – darunter führende Architektur- und Store Design Büros sowie Hersteller – zeigen auf über 27.000 angemeldeten Quadratmetern Fläche ihre neuesten Entwicklungen. Das Spektrum reicht von innovativen Konzepten, beeindruckenden Shop Designs und Visual Merchandising Lösungen über Materialien sowie Möbeln bis hin zu modularen Systemen für den Point of Sale. Die Lighting Dimension wird erneut zum Blickfang beim Betreten der EuroShop. Sie zeigt, wie durchdachte Beleuchtung Stores in Erlebniswelten verwandelt, Atmosphäre schafft und den Point of Sale eindrucksvoll in Szene setzt. Die Dimension Expo & Event Marketing erfährt eine besonders große Nachfrage. Die Flächen reichen nicht mehr aus, sodass sie erstmals auf zwei Hallen ausgeweitet wird. Mit über 25.000 Quadratmetern Fläche wird der Bereich Refrigeration & Energy Management besonders groß. Dies belegt nicht nur den Bedarf an energieeffizienten Technologien und nachhaltiger Kühlung, sondern auch, wie stark die Handelsgastronomie boomt. In der Dimension EuroCIS (Retail Technology) präsentieren über 550 Aussteller, wie KI, Customer Centricity, Smart Stores und viele weitere Technologien die Zukunft des Handels prägen. Die Dimension Retail Marketing verdeutlicht eindrucksvoll, wie wichtig es ist, Kundinnen und Kunden ein Einkaufserlebnis mit allen Sinnen zu bieten. Multisensorische Inszenierungen und innovative Instore Kampagnen zeigen, wie sich Kaufimpulse gezielt verstärken lassen.

Zahlreiche Sonderflächen laden dazu ein, tief in verschiedene Themenbereiche einzutauchen. Im Designers’ Village präsentieren internationale Architekturbüros und Designstudios ihre visionären Konzepte. Neu ist die Sonderfläche VM Experience, die das Visual Merchandising interaktiv, dialogisch und kreativ erlebbar macht. Das Food Service Innovation Hub beleuchtet die digitale Transformation und Automatisierung in der Handelsgastronomie, während die Italian Lighting Lounge eindrucksvoll zeigt, welche Rolle Licht im modernen Store Design spielt. Im Shop! Village stehen Visual Merchandising und POS-Marketing im Vordergrund. Wieder dabei sind das IFES Global Village, das dlv Village und der Start-up Hub. In der 60’s Lounge leben die Zeitgeschichte und die Anfangstage der EuroShop wieder auf. Auf sieben Stages präsentieren Retailer und Aussteller Trends, Cases und Fachbeiträge. Diskussionsrunden regen zum Wissensaustausch über zukunftsweisende Topics der internationalen Handelswelt an.

Die Guided Innovation Tours auf der EuroShop treten im Jubiläumsjahr mit einem breiteren Angebot auf: Touren zu verschiedenen Schwerpunktthemen sorgen während der Laufzeit für einen einfachen Überblick über spannende Aussteller in den Bereichen Sustainable Materials und Store Design, Retail Tech Innovation, Energy Management & Optimization sowie Food Service Innovationen. Auch Store Touren zu interessanten Shop-Konzepten am Standort Düsseldorf werden zum ersten Mal stattfinden.

More information:
EuroShop Retail Technology Retail Design
Source:

Messe Düsseldorf

print close
more