From the Sector

Die Seiko Epson Corporation (Epson) arbeitet ab sofort mit SUSS zusammen, einem führenden Hersteller von Prozesslösungen für die Halbleiter- und Elektronikindustrie. Im Rahmen dieser Partnerschaft wird SUSS die Epson PrecisionCore Druckkopftechnologie (Druckkopfserie I3200) in seinen Drucker LP50 einbauen, dem Topmodell zur Erforschung und Entwicklung neuer Inkjet-Druckprozesse. Ein Hauptziel der Kooperation ist dabei, die Einsatzmöglichkeiten der Tintenstrahldrucktechnologie auszubauen und neue Methoden für den Druck von Funktionsmaterialien zu entwickeln. Die Zusammenarbeit zwischen SUSS und Epson stellt einen bedeutenden Schritt in der Entwicklung gedruckter Elektronikschaltungen dar.

Die Pilotanlage wird zunächst in der Epson Europe B.V. Niederlassung Marly in der Schweiz installiert. Die Geschäftsstelle in Marly ist eine Gemeinschaftseinrichtung, in der Interessenten aus der produzierenden Industrie ihre Technologien und Materialien testen können. Die Entscheidung von SUSS für die Epson PrecisionCore Technologie beruht auf der hohen Druckqualität und der Möglichkeit, in einem Druckkopf bis zu acht Tinten gleichzeitig zu verdrucken. Darüber hinaus ist das Material des Druckkopfes chemisch sehr inert, sodass Forscher:innen und Entwickler:innen Druckprozesse mit Spezialliquiden störungsfrei untersuchen können.

Der LP50, bekannt für innovatives Design und Vielseitigkeit, ist ein wichtiges Instrument bei der Bewertung und Entwicklung von Inkjet-Materialien für unterschiedlichste Anwendungen der Elektronikindustrie. Der neue LP50 mit der PrecisionCore Druckkopftechnologie von Epson wird noch in der ersten Hälfte des Jahres 2025 vorgestellt. Bestehende Anwender des LP50 erhalten dann die Möglichkeit, ihre Geräte durch die Beschaffung geeigneter Optionen auf die Epson Technologie aufzurüsten. Später im Jahr werden SUSS und Epson weiterhin sogenannte Application Kits vorstellen, die neue getestete Prozesse und Materialien aus der F&E-Abteilung von Epson in Japan enthalten. Dieses Angebot unterstreicht das Engagement beider Unternehmen, neue Drucklösungen in der Elektronikindustrie zu etablieren.

On 19-20 February 2025, social partners from the Italian textile and fashion industry met in Rome to deepen their understanding of the upcoming EU legislations and their impact on the Italian textile industry, as well as to further discuss the next step in their effort for a more broad and effective social dialogue. In the context of the EU co-funded StitchTogether project, which aims at promoting social partnerships in the European Textiles and Clothing Industry, the meeting was also the occasion to draft the Rome Declaration: a joint statement to emphasise the social partners’ strong commitment to work together.

The meeting in Rome brought together representatives of the Italian textile industry, including the Italian employer association (Confindustria Moda), national trade unions (Femca-Cisl, Filctem-Cgil and Uiltec-Uil), regional clusters and companies to discuss the future of the industry. Together, they discussed the proposal for a sectoral industrial policy strategy to present to the Italian Government and the EU Commission for the support, consolidation and development of the textile-clothing supply chain.

The Rome Declaration includes a series of priorities, confirming social partners’ commitment in working together for a more competitive and fair Italian textile industry. The Declaration also calls upon the Italian Government and the European Union to support the upcoming transformation of the textile and clothing industries, technology and skills upgrades, regional development and just transition.

Says Judith Kirton-Darling, IndustriAll Europe's general secretary stated that “the Italian textile industry employs around 300,000 workers, or 24% of the European workforce in the textile and clothing sector, making it the largest in Europe. In a context of numerous challenges for the European textile industry, such as unfair globalization, green and digital transition, social dialogue is a real lever for improving working conditions and job security. We are committed alongside our Italian partners to a resilient and attractive textile industry in Italy”.

Dirk Vantyghem, EURATEX Director General, stressed that “Italy represents 36% of the total European textile and fashion industry; it is critically important therefore to maintain a strong Italian textile industry, which can be a benchmark for other countries. Combining quality, creativity and innovation is the recipe for success. This requires a dynamic company spirit, where employers and employees work hand in hand.”

The acquisition of a majority stake of 70 percent in the Chinese automotive supplier Jiangsu Huanyu Group, which was announced in November 2024, was completed with effect from February 28, 2025, following approval by the authorities. As a result, Business Group Asia secures access to all major Chinese manufacturers and significantly increases its annual revenue.

The agreement to acquire 70 percent of the shares of Jiangsu Huanyu Group, which was signed on November 19, 2024, was executed today. All necessary approvals by the authorities for the take-over have been granted. As a result, Autoneum is acquiring a majority stake in one of the leading suppliers of lightweight components for light and commercial vehicles in China as of February 28, 2025. Autoneum also has the option to purchase the remaining 30 percent of the share capital in 2028. As previously announced, the Jiangsu Huanyu Group will continue to operate under its Chinese name.

Established in 2001, Jiangsu Huanyu Group operates 13 production facilities* with approximately 1 200 employees in close proximity to local vehicle manufacturers in the north, west and southeast of China, including the booming automotive hubs of Anhui and Shaanxi. The plant in Wuhan is operated by several companies of the Jiangsu Huanyu Group, but officially counts as only one site. Therefore, a total of 13 production facilities were acquired with the Jiangsu Huanyu Group, and not 14 as announced on November 19, 2024.

The Group’s product port-folio includes components for the vehicle interior such as carpets, inner and outer dashes, headlin-ers, trunk and interior trim, wheelhouse outer liners as well as insulation for the engine bay and the underbody, offering strong potential for synergies with Autoneum’s current product offerings. In the 2023 financial year, Jiangsu Huanyu Group generated revenue of around CHF 130 million with a significant increase in 2024.

The takeover marks another milestone on the way to generating 20 percent of Group revenue in Asia in the medium term. Autoneum Chief Executive Officer Eelco Spoelder explains: “Jiangsu Huanyu Group achieves over 90 percent of its revenue with Chinese customers, making it an ex-cellent strategic fit for Autoneum. We are gaining access to an established customer base in China, including several major Chinese vehicle manufacturers such as BYD, BAIC and GAC, and are thus significantly strengthening our position in the world’s largest automotive market. Jiangsu Huanyu Group’s presence and diversified product portfolio will also support the expansion of our commer-cial vehicle business in China and enable us to leverage further synergies in the areas of technology, manufacturing processes and purchasing.”

Jakob Müller Group (JMG), a leader in narrow fabric weaving machinery, acquired 100% of the shares of MEI International, effective January 1, 2025. With a history spanning over 50 years, MEI is a renowned Italian manufacturer of wide label weaving machines. This strategic acquisition combines the strengths of two industry pioneers, creating a comprehensive portfolio of solutions for woven label production.

JMG, known for its high-quality rapier and air-jet weaving machines, expands its offerings with MEI’s specialized air-jet technology and broad product range. As part of this integration, JMG will discontinue its Müjet air-jet weaving machine, fully endorsing MEI's advanced air-jet technology, which will continue to be strengthened thanks to the mutual cooperation.

MEI will continue to operate as an independent company, retaining its location in Gallarate, Italy, with Paolo Mazzucchelli remaining as CEO. Both brands will maintain their separate market presence, leveraging their individual strengths to serve customers in a demanding market environment.

Key benefits of the acquisition:

• Comprehensive product portfolio: Customers gain access to a wider range of label weaving machines, catering to diverse production needs.
• Enhanced innovation: The combined expertise of JMG and MEI will accelerate the development of new products and services.
• Stronger financial foundation: The acquisition reinforces the financial strength of both companies, enabling increased investment in innovation and customer support.
• Continued customer focus: Existing sales and service structures of both companies will remain in place, ensuring continuity for customers.

“This acquisition is a significant step forward in our JMG 2030 strategy,” said Andreas Conzelmann, CEO of Jakob Müller Group. “I really appreciate the entire MEI team for their values, attitude, and spirit. Together, we can offer our customers an outstanding range of solutions and services, while continuing to provide the highest quality, productivity, and reliability they expect from both JMG and MEI.”

Paolo Mazzucchelli, CEO of MEI, added, “Joining forces with JMG is an exciting opportunity for MEI. This alliance will enable us to develop new products and services more quickly and professionally, ultimately benefiting our customers’ growth. We are committed to maintaining our separate sales forces to preserve the long-standing relationships we have built with our customers.”

The National Council of Textile Organizations (NCTO), National Chamber of the Textile Industry (CANAINTEX), and Canadian Textile Industry Association (CTIA) issued a joint statement urging President Donald Trump to reach a deal with Mexico and Canada to avoid imposing 25 percent tariffs on imports from these countries and to close the de minimis loophole immediately.

“All three of our countries are partners in a vital textile and apparel coproduction chain that generates $20 billion in two-way trade and helps support over 1.6 million jobs under the United States-Mexico-Canada Agreement (USMCA) — a trade deal that was negotiated during President Trump’s first term in office,” the associations said.

The U.S. textile industry ships $12.3 billion, or 53 percent, of its total global textile exports to Mexico and Canada. Those inputs come back as finished products to the United States under the USMCA.

Mexico exports $9 billion in textile and apparel to the United States. Mexico is the 4th largest exporter of textiles and the 6th largest exporter of apparel to the United States.

Canada exports approximately $1.8 billion in textiles and apparel to the United States and Mexico, with the United States being the destination for 64 percent of its total global textile export, including high-quality flame-resistant materials and medical equipment including PPE.

“While we fully support President Trump’s efforts to stem illegal migration and to address the fentanyl crisis as quickly as possible, we urge the administration to refrain from imposing penalty tariffs on imports from USMCA partners. We are focused on ensuring a normalized trading relationship between our countries,” said NCTO President and CEO Kim Glas. “Imposing penalty tariffs on imports from critical U.S. free trade agreement (FTA) partners will only serve to benefit China and other Asian countries that don’t play by the rules and to harm the U.S. textile industry and manufacturers in our Western Hemisphere supply chains.”

“As part of any deal with Mexico, Canada—and China—we also call on the Trump administration to end the de minimis tariff exemption immediately for imports from all countries. This loophole in U.S. trade law, which allows imports valued at $800 or less to enter the United States duty-free hurts our textile and apparel industries, rewards countries like China, and helps facilitate the flow of illegal and toxic products, such as fentanyl and fentanyl precursors into the U.S. market,” Glas added.

“Despite steps taken by our countries to prevent the importation of goods that are undervalued, made with forced labor or transshipped, we have seen firsthand how the Asian market has gained an unfair advantage through predatory trade practices, displacing companies and workers in our industries and undermining our critical coproduction chain,” said Rafael Zaga Saba President of CANAINTEX.

“Canada is seeking to preserve our strong coproduction chain with Mexico and the United States which spurs investment, trade and employment in our three countries,” said Jeff Ayoub, Chairman of the Board of CTIA. “These additional tariffs would harm our industries and workers, and we urge President Trump stop these expected tariffs from being imposed.”

“We look forward to working closely with the Trump administration and continuing to educate officials about the adverse impact of penalty tariffs on imports from Western Hemisphere countries and de minimis on our industries and workers, while highlighting the critical nature of our strong coproduction chain, which contributes to our overall investment, job growth, and economic stability,” the associations jointly added.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers.

• U.S. employment in the textile and apparel supply chain was 501,755 in 2023.
• The value of shipments for U.S. textiles and apparel was $64.8 billion in 2023.
• U.S. exports of fiber, textiles and apparel were $29.7 billion in 2023.
• Capital expenditures for textiles and apparel production totaled $2.27 billion in 2021, the last year for which data is available.

CANAINTEX is a Mexico City-based trade association representing Mexican textile producers.

• The textile industry in Mexico provides over 1.1 million jobs.
• Mexican textile exports are projected to reach 9 billion USD in 2024.
• Mexico is the 4th largest exporter of textiles and the 6th largest exporter of apparel to the United States.
• One out of every three pairs of pants sold in the U.S. is made in Mexico.
• With 36% domestic content in its exports, the textile industry generates the highest value-added of any manufacturing sector in the country.

CTIA represents domestic textile manufacturers across Canada, advocating for policies that support innovation, sustainability, and growth in the sector.

• The Canadian textile industry employs approximately 30,000 textile and apparel workers.
• The total value of shipments for Canadian textiles and apparel was approximately C$7.5 billion in 2023.
• Canada exported approximately US$2.66 billion in textiles in 2023, with 64% (US$1.71 billion) going to the United States.

Schutztextilien haben je nach Einsatzgebiet spezielle Anforderungen und damit verbundene Eigenschaften. Bevor sie der Anwender nutzt, haben viele Menschen einen Anteil an der Bereitstellung dieser textilen High-Tech-Erzeugnisse, angefangen mit der Faserstoffauswahl, über die verschiedenen Formen der Flächenbildung, -konstruktion und -veredlung, von Design, Schnittgestaltung und Herstellung beim Konfektionär bis hin zu den Prüflaboren und den Zertifizierungsstellen.

Am 22. Dezember 1994 von der Zentralstelle der Länder für Sicherheitstechnik (ZLS) akkreditiert, bietet das STFI als Notified Body (Benannte Stelle) 0516 seit über 30 Jahren Zertifizierungen im Bereich Schutztextilien an. Das erste Zertifikat, welches am STFI ausgestellt wurde, galt dem Chemikalienschutz. Damals sogar ohne einen harmonisierten Standard. Seither haben mehrere Tausend Zertifikate das STFI verlassen, die den Kunden konforme Produkte für den Hitze-, Schweißer,- Chemikalien-, Störlichtbogen- und Elektrostatikschutz bescheinigen.

Der Startpunkt der Zertifizierungen von Schutztextilien am STFI ist eng mit der europäischen Wirtschaftsgeschichte verwoben. Die Gründung des gemeinsamen Binnenmarktes der EU zum 1. Januar 1993 ermöglichte den freien Warenverkehr über die Grenzen der Länder hinweg. Das CE-Kennzeichen kommt damit einem Reisepass für Produkte gleich, die harmonisierte Sicherheitsanforderungen erfüllen, so auch für Persönliche Schutzausrüstung (PSA). So darf seit 1. Juli 1995 keine Schutzkleidung in Europa mehr ohne das CE-Kennzeichen verkauft werden. PSA, die ihren Träger vor besonderen Gefährdungen schützt, sind in diesem Zusammenhang durch sogenannte benannte Stellen einer EU-Baumusterprüfung zu unterziehen.

30 Jahre Zertifizierungsstelle am STFI heißt neben stabilen Kundenbeziehungen gleichwohl Evolution. Einerseits bestimmen stetige Neuerungen des normativen Rahmens die Schutzprodukte. Wurde Hitze- und Flammschutzkleidung zu Beginn der Zertifizierungstätigkeit noch auf Basis der europäischen Norm EN 531 mit relativ wenigen Parametern beschrieben, definiert heute der internationale Standard EN ISO 11612 umfassende Prüf- und Bewertungsanforderungen für derartige textile Schutzausrüstungen.

Andererseits etabliert sich gänzlich neue Schutzkleidung für hochspezialisierte Szenarien am Markt, deren Entwicklung mit entsprechenden Prüfverfahren und Normenarbeit einhergeht. Hier kommt die Expertise der akkreditierten Prüfstelle des STFI ins Spiel. Das Team für Prüfverfahrensentwicklung gestaltete maßgeblich die Vorgaben für Schutzkleidung gegen Störlichtbogen mit und ist für diese Schutzkleidung in Deutschland seither führender Partner der Hersteller. Vergleichbares gilt für Schutzkleidung gegen Laserstrahlen, das STFI schuf hierzu das bislang einzig verfügbare Verfahren für die Prüfung und Bewertung solcher Schutzkleidung. Heute treibt der Schutz vor verfahrensbedingt entstehender UV- Strahlung, die beispielsweise beim Schweißen oder bei der UV-Desinfektion im industriellen Umfeld entsteht, die Mitarbeitenden zu neuen Entwicklungen an. Erforscht wird jüngst das Degradationsverhalten von Textilien, die technischer UV-Strahlung exponiert sind, darüber hinaus wird eine Testmethode für das Verfahren entwickelt.

Aus den ersten Schritten zur Gewinnung von Kundenvertrauen, der Beratung zu den damals neu erschienenen europäischen Normen und einer konsequenten Ausrichtung an den Wünschen und Bedürfnissen der Kunden ist über die Jahre ein international geschätztes und gefragtes Team gewachsen. Regelmäßig informiert das STFI in Schulungen über gesetzliche Änderungen rund um PSA, um den Kunden Sicherheit im Umgang mit Inhalten und Anforderungen der Schutzkleidungsnormen zu vermitteln.

The Lenzing Group, a leading supplier of regenerated cellulose fibers for the textile and nonwovens industries, welcomes the European Commission’s Clean Industrial Deal, which aims to pave the way for a sustainable, climate-neutral and competitive industry. Commission President Ursula von der Leyen discussed the initiative on Wednesday, February 26, 2025, together with 400 business leaders, including the CEO of the Lenzing Group, Rohit Aggarwal, in Antwerp (Belgium). The industry is calling on EU heads of state and government to take urgent measures in all EU member states without delay ahead of the upcoming European Council meeting in March.

“International trade tensions, volatile energy markets, and the need to decarbonise industries demand urgent collective action. We must continue to support Europe’s green leadership and ensure that those investing in sustainability are incentivised. We must act now, work together and translate ambition into tangible results”, emphasizes Rohit Aggarwal, CEO of Lenzing Group. “The Clean Industrial Deal is an important initiative for Europe’s industrial and sustainable future. It will strengthen Europe’s net-zero industry, expand green technology manufacturing, and enhance industrial competitiveness.”

One important aspect is access to affordable and clean energy, which is crucial for the global position and competitiveness of the industry.

“We appreciate the Commission President taking the time to join us today in Antwerp to present the Clean Industrial Deal. Nine out of ten calls of the Antwerp Declaration have been addressed. We need to transform Europe’s ambition ‘to be’, into a determination ‘to do’. Every day, Europe is falling behind its goals, and is losing quality jobs for our current and future generations of workers. In the turbulent times we are in we need bold action from the European Leadership,” said Ilham Kadri, President of the European Chemical Industry Council, Cefic.

Europe’s industries are facing historical challenges: declining demand, stalled investments, reduced capacity, and EU gas prices at 4 to 5 times higher than its competitors. Between 2023 and 2024, Europe’s manufacturing output – a sector employing over 31 million people – dropped another 2.6 percent. While for the chemicals industry – the industry of industries – Cefic’s recent study emphasised the severity, with over 11 million tons of capacity announced to be closed between 2023 and 2024, affecting 21 major sites.

To overcome these challenges, back in February 2024, 73 business leaders presented the Antwerp Declaration to Commission President, Ursula von der Leyen and former Belgian Prime Minister Alexander De Croo. The Antwerp Declaration lays out 10 concrete actions to restore the business case for investments, to implement Europe’s sustainability ambitions and safeguard quality jobs in Europe. It is now signed by over 1,300 signatories.

“Reading the Clean Industrial Deal, we need the Commission to focus, prioritise the three key actions that improve our situation already this year and put all power, boldness and bravery in the European Commission behind these. And give us a realistic planning for the remaining actions. When we say actions, we mean action, not strategies, policies or plans. Leave no stone unturned and break all taboos. We need the situation to change.” Marco Mensink, Cefic Director General.

“Cefic calls on all new EU initiatives to be evaluated against the following criteria: Do they keep Europe safe and independent, reduce energy prices, ease the administrative burden on companies, attract investments to Europe, create markets for sustainable products, and safeguard quality jobs in Europe? If the answer to any of these questions is no, EU policymakers should reconsider and revise the proposal accordingly.”

Aus Perspektive des Wirtschafts- und Arbeitgeberverbands sollte der vorgestellte Vorschlag der EU-Kommission schnell und pragmatisch umgesetzt werden.

Nach der Veröffentlichung des Arbeitsprogramms der EU-Kommission Mitte Februar wurden nun die erwarteten Omnibus-Verordnungen I und II vorgestellt. Das Paket beinhaltet Anpassungen der europäischen Lieferkettenrichtlinie (CSDDD), der Richtlinie zur Nachhaltigkeitsberichterstattung (CSRD) und der Taxonomie-Verordnung. Darüber hinaus auch eine Änderung der Verordnung über den CO₂-Grenzausgleichsmechanismus (CBAM) und der InvestEU-Verordnung.

Südwesttextil begrüßt, dass der Entwurf für die Taxonomie-Verordnung und die CSRD eine Reduzierung der Datenpunkte vorsieht. Im Bereich der europäischen Lieferkettenrichtlinie bewertet der Wirtschafts- und Arbeitgeberverband positiv, dass die Unternehmen durch die Verlängerung der Überprüfungsintervalle von einem auf fünf Jahre entlastet werden. In der Zwischenzeit muss bei Bedarf ad-hoc gehandelt werden. Ebenso werden die Sorgfaltspflichten der CSDDD auf die direkten Geschäftspartner fokussiert, auch hier gilt zukünftig der anlassbezogene Bewertungsbedarf für indirekte Akteure. Besonders positiv sieht Südwesttextil auch, dass durch das Omnibus-Paket auch die strengere Umsetzung in den Mitgliedsstaaten unterbunden wird, sodass zukünftig einheitliche Wettbewerbsbedingungen in der EU gewährleistet werden.

Hauptgeschäftsführerin Edina Brenner: „Die baden-württembergische Textil- und Bekleidungsindustrie steht grundsätzlich hinter den EU-weiten Zielen der Nachhaltigkeit. Diese sollten aber Platz für nachhaltiges Wirtschaften lassen, nicht mit Bürokratie überborden und die internationale Wettbewerbsfähigkeit der Unternehmen stärken und nicht schwächen. Die vorgeschlagenen Änderungen des Omnibus-Pakets können einen Beitrag zurBürokratieentlastung der Unternehmen leisten. Jetzt gilt es, die Verordnungen schnellstmöglich zu verabschieden und weitere Potenziale zu prüfen.“

eVent® Fabrics, a global leader in waterproof/breathable and windproof fabric laminates, introduces their newest, high performance laminate offering, stormburstLT.

Designed to offer best-in-class breathability, the ultralight and ultra-breathable stormburstLT joins existing laminates, including alpineST for extreme applications; stormST for outdoor and lifestyle applications; and windstormST for breathable windproof and softshell applications. This complete line rounds out eVent’s collection of laminates, providing brand partners with custom solutions for apparel, footwear, and gloves.

“With a focus on aerobic use, the stormburstLT ultralight technology platform fills a necessary category space for us,” said Chad Kelly, President of eVent Fabrics. “We designed stormburstLT with a super thin, 5-micron PFAS-free membrane, and will offer it with either lightweight woven or knitted face and interior fabrics, to create a versatile windproof laminate with very high moisture vapor transport and breathability. We’ve listened to our brand partners and are confident we now have a high-performance solution for the fast and light category, as well as a much-requested breathable fabric for insulated jackets.”

eVent will market the new stormburstLT to brands specializing in running, cycling, Nordic skiing, hiking, skiing, and activewear. Light, packable and versatile, stormburstLT is also ideal for adventure travel.  
eVent® Fabrics invites designers, product developers, and industry professionals to visit them at Performance Days Munich.

With the Fraunhofer Innovation Platform for Fibers, Processing and Recycling Solutions at Innovative Composite Center FIP-MIRAI@ICC, the Fraunhofer Institute for Casting, Composite and Processing Technology IGCV and the Innovative Composite Center (ICC), Kanazawa Institute of Technology (KIT) in Kanazawa area are setting new standards in the circular economy. With a total budget of 2 million euros - half funded by the Fraunhofer-Society and half by the ICC - the platform aims to develop solutions to global challenges in the field of composite recycling. A Fraunhofer Innovation Platform (FIP) is a temporary research unit hosted and operated by a research institution abroad, which is set up in close cooperation with one or more Fraunhofer Institutes in Germany. With “Mirai”, the Japanese word for “future”, the FIP-MIRAI@ICC sends out a clear signal: Waste is seen as a valuable resource and reused through new technologies. The aim is to create a forward-looking circular economy that guarantees sustainability for future generations. At the heart of the five-year cooperation (2025-2029) is a central location in Kanazawa area, which brings together researchers from the Fraunhofer IGCV and the ICC with companies, universities and customers.

Global challenges as an opportunity for innovation
The increasing use of composite materials in industries such as aerospace, wind energy and sports is leading to rising volumes of hard-to-recycle waste. As early as 2023, 75 kilotons of carbon fiber waste were produced worldwide, and 350 kilotons are expected by 2028 in aviation alone. The growing use of hydrogen technologies in mobility and transportation will further exacerbate this problem.

Technological innovations for sustainability
The German-Japanese collaboration pools technological expertise: the Fraunhofer IGCV contributes its expertise in fiber-matrix separation, quality assurance of recyclates and the wet-laid process, while the ICC contributes its pressing processes and continuous double-belt press technology. Together, this creates a unique “one-stop-shop” offering for companies looking for solutions for the recycling of composite materials.

Appearance at the JEC World 2025
A first insight into the work of FIP-MIRAI@ICC will be provided at JEC World 2025 in Paris, where the platform will be represented at the Japan Pavilion. Companies, researchers and industry experts are invited to visit the stand and discuss the latest developments.

A boost for the circular economy
FIP-MIRAI@ICC aims to act as a catalyst for sustainable technologies and transform waste streams into valuable resources. The close partnership between German and Japanese players paves the way for a sustainable and future-proof industry. With this initiative, science and industry are joining forces to turn global challenges into opportunities. With the vision of promoting ecological and economic sustainability, FIP-MIRAI@ICC is setting new standards in international cooperation.