From the Sector

Reset
1128 results
26.01.2025

Contaminants found in commonly hunted waterfowl

Researchers tested five species of commonly hunted waterfowl in the northeast Atlantic Flyway and, in every sample, found contaminants that could impact the health of the birds, as well as the hunters and others who consume them.

The study, published Jan. 15 in Science of the Total Environment and conducted in collaboration with the New York State Department of Environmental Conservation (NYSDEC) and other state agencies, found detectable levels of polychlorinated biphenyls (PCBs) and at least one organochlorine pesticide (OCP) and per- or polyfluoroalkyl substance (PFAS) in each bird sampled, in a representative group of more than 100 birds collected across four states and nine ecological regions.

Among the findings, the researchers determined that current New York State Department of Health consumption advisories - of two meals per month of waterfowl - may be appropriate, but some species are more or less contaminated than others. In risk assessments, the researchers found that some of the contaminants likely expose consumers to potential cancer risk, although how this risk compares to the consumption of other foods is unclear.

Researchers tested five species of commonly hunted waterfowl in the northeast Atlantic Flyway and, in every sample, found contaminants that could impact the health of the birds, as well as the hunters and others who consume them.

The study, published Jan. 15 in Science of the Total Environment and conducted in collaboration with the New York State Department of Environmental Conservation (NYSDEC) and other state agencies, found detectable levels of polychlorinated biphenyls (PCBs) and at least one organochlorine pesticide (OCP) and per- or polyfluoroalkyl substance (PFAS) in each bird sampled, in a representative group of more than 100 birds collected across four states and nine ecological regions.

Among the findings, the researchers determined that current New York State Department of Health consumption advisories - of two meals per month of waterfowl - may be appropriate, but some species are more or less contaminated than others. In risk assessments, the researchers found that some of the contaminants likely expose consumers to potential cancer risk, although how this risk compares to the consumption of other foods is unclear.

Of the five species studied, Canada geese and wood ducks had lower levels of contaminants than mallards, American black ducks and American green-winged teal, probably due to differences in their feeding habits, the authors said.

“The big picture is that these chemicals are out there, and wild animals are being exposed to them,” said senior author Krysten Schuler, assistant research professor of public and ecosystem health, and wildlife disease ecologist for the Cornell Wildlife Health Lab in the College of Veterinary Medicine (CVM). “We’re worried about it from the wildlife population standpoint: What do these chemicals mean for the birds? But then there’s also the question of what it means for human consumption.”

Hunters in the four participating states – New York, Pennsylvania, New Jersey and Connecticut – harvest and consume more than a half-million wild-caught ducks and geese each year. But in New York, the guidance on safe consumption has not been updated since the early 1990s and doesn’t include some of the birds most likely to be consumed. The new data can now be used by health departments in all four states to assess current guidelines and craft new human consumption recommendations, when necessary.

“This provides a really good baseline,” Schuler said. “We’re not telling people what to eat or do. We’re just providing the numbers.”

In the risk assessments, researchers found that the levels of mercury and OCPs detected posed minimal risk to health for hunters who follow the current guidance on consumption, but they found that the levels of PCBs – human-made chemicals that were banned in 1979 – may be more likely to pose health risks, including increased cancer risk, although the authors said that more research is needed. The thresholds for safe consumption are variable depending on the level of acceptable risk, they said.

The study also lays the foundation for more research on how these contaminants affect the birds.

“It’s hard to know at what level these contaminants start to impact the bird’s survival or reproductive success,” said co-author Joshua Stiller, small game unit leader for NYSDEC, who initially brought the project to Schuler and her team. “But just understanding the current contaminant loads in these species is important, and we can get some ideas for future research to better understand the potential impacts on waterfowl populations.”

Much of the previous research on contaminants has looked at animals linked to known sources of pollution. To understand the contaminant levels at the population level, the researchers collected birds from various regions in each state. This required a massive collaborative effort, with help from state wildlife and conservation agencies, which deployed biologists to collect birds from hunters willing to participate.

The biologists then sent the birds to the Wildlife Health Lab, where they were processed and sent on to other labs for further testing.

“For each bird, we had somewhere between 200 and 300 columns of data,” said first author David Dayan ’23, who started working on the project as an undergraduate and did everything from handling and preparing the birds to high-level data analysis and assessment. “Trying to paint a coherent picture from all of these different perspectives and data points was a really interesting way to do science.”

In terms of conservation, Schuler said the widespread contamination of waterfowl is another warning sign. “These animals are constantly losing wetlands and habitats and being forced into less desirable locations,” she said. “This just highlights the importance of protecting those areas for these species.”

More information:
waterfowl contamination PCB
Source:

Caitlin Hayes, Cornell Chronicle

Datamars UHF Sorti-Cart - 2 (c) Datamars
26.01.2025

Neue RFID-Lösung für Textilpflege in Alten- und Pflegeheimen

Im Rahmen der Textilpflege in Alten- und Pflegeheime können durch Falschsortierung erhebliche Mengen persönlicher Wäschestücke verloren gehen. Mit dem UHF Sorti-Cart bietet das Unternehmen Datamars nun eine patentierte RFID-basierte Lösung, die nicht nur effizientere Textilpflegeprozesse ermöglicht, sondern auch Verluste deutlich reduziert: In hunderten Einrichtungen, in denen das System bereits eingeführt wurde, gehen im Schnitt etwa zwei Kleidungsstücke pro Bewohner pro Monat weniger verloren als zuvor. Damit wächst die Zufriedenheit der Bewohner und Angehörigen, die Arbeitsbelastung des Personals sinkt.

Im Rahmen der Textilpflege in Alten- und Pflegeheime können durch Falschsortierung erhebliche Mengen persönlicher Wäschestücke verloren gehen. Mit dem UHF Sorti-Cart bietet das Unternehmen Datamars nun eine patentierte RFID-basierte Lösung, die nicht nur effizientere Textilpflegeprozesse ermöglicht, sondern auch Verluste deutlich reduziert: In hunderten Einrichtungen, in denen das System bereits eingeführt wurde, gehen im Schnitt etwa zwei Kleidungsstücke pro Bewohner pro Monat weniger verloren als zuvor. Damit wächst die Zufriedenheit der Bewohner und Angehörigen, die Arbeitsbelastung des Personals sinkt.

Das Management der persönlichen Kleidung der Bewohner zusammen mit der Bettwäsche und den Handtüchern stellt sowohl für Alten- und Pflegeheime als auch für Großwäschereien eine immer wiederkehrende Herausforderung dar. Beim Einsammeln verschmutzter Textilien wird die persönliche Kleidung oft mit Bettwäsche und Handtüchern vermischt, was zu erheblichen Verlusten führt. Studien zeigen, dass jährlich etwa 25 Prozent der Kleidung eines Bewohners verloren gehen, was zu Frustration bei Bewohnern und Angehörigen sowie zu Ineffizienz und zusätzlicher Arbeitsbelastung beim Personal führt.

Maßgeschneiderte RFID-Lösung
Das UHF Sorti-Cart ist eine mobile Sortierlösung auf RFID-Basis, die Datamars gemeinsam mit seinem Kunden Bulle de Linge speziell für das Einsammeln verschmutzter Textilien in Heimen entwickelte. Das innovative System sorgt für eine genaue Sortierung der persönlichen Kleidung, Bettwäsche und Handtücher am Abholort und verhindert, dass Kleidungsstücke falsch zugeordnet werden.

Zu den Schlüsselmerkmalen der Lösung zählt, dass die Kleidungsstücke der Bewohner mit individuell codierten Datamars Laundrychips (FT403) versehen sind. Die RFID-Etiketten sorgen für eine durchgehende Rückverfolgbarkeit während des gesamten Prozesses. Ein weiteres Merkmal ist das patentierte UHF-Sorti-Cart-Lesesystem: Der Wagen verfügt über getrennte Abschnitte für Bettwäsche, Handtücher und persönliche Wäsche. RFID-Lesegeräte und -Antennen in den Flachwäscheabschnitten erkennen, wenn persönliche Kleidung im falschen Abschnitt gelandet ist. Drittes Schlüsselmerkmal ist ein Echtzeit-Warnsystem: Ein integrierter Summer und eine Signalleuchte informieren das Personal bei Fehlern, so dass eine sofortige Korrektur möglich ist. Durch den Wegfall der manuellen Sortierung und die Reduzierung des Fehlerrisikos werden die Wäschereiprozesse insgesamt effizienter.

Source:

Datamars

26.01.2025

NCTO: President Donald Trump shall end de minimis by executive order

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement commending U.S. Customs and Border Protection’s (CBP) notice of proposed rulemaking aimed at curtailing de minimis shipments that are harming the U.S. manufacturing base and U.S. consumers.

Statement by NCTO President and CEO Kim Glas (17 January):
“We welcome CBP’s announced notice of proposed rulemaking exempting de minimis tariff-free benefits on imports ‘specified as trade and national security actions.’ This rulemaking represents a step forward in minimizing the impact of this disastrous loophole in U.S. trade law that has facilitated a surge of duty-free imports that are normally subject to penalty tariffs under various U.S. trade remedy statutes. Failure to collect these duties has exacerbated the flow of goods found to be in violation of U.S. trade laws that are costing American jobs and damaging our manufacturing sector.

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement commending U.S. Customs and Border Protection’s (CBP) notice of proposed rulemaking aimed at curtailing de minimis shipments that are harming the U.S. manufacturing base and U.S. consumers.

Statement by NCTO President and CEO Kim Glas (17 January):
“We welcome CBP’s announced notice of proposed rulemaking exempting de minimis tariff-free benefits on imports ‘specified as trade and national security actions.’ This rulemaking represents a step forward in minimizing the impact of this disastrous loophole in U.S. trade law that has facilitated a surge of duty-free imports that are normally subject to penalty tariffs under various U.S. trade remedy statutes. Failure to collect these duties has exacerbated the flow of goods found to be in violation of U.S. trade laws that are costing American jobs and damaging our manufacturing sector.

“With this rulemaking, CBP and the administration seek to eliminate de minimis treatment for all imported products subject to U.S. trade remedies and penalties, including the current Section 301 tariffs on China. This is an important and much overdue reform.”

CBP states that the number of shipments over the past 10 years entering the United States claiming the de minimis administrative exemption has increased by more than 600%--from approximately 139 million a year in Fiscal Year 2015, to over one billion a year in FY 2023. During FY 2024, de minimis shipments rose once again to over 1.36 billion, according to CBP. The agency notes that the exponential increase ‘has created challenges for CBP’s effective enforcement of U.S. trade laws, health and safety requirements, intellectual property rights, and consumer protection rules.’     

“We have long called on the administration to use its existing authorities to mitigate the damage to our industry created by de minimis, which has functioned as a massive tariff loophole for low-cost, subsidized, and unethical Chinese imports and undermined the competitiveness of the U.S. textile industry—a key contributor to the workforce and the U.S. economy.

“The U.S. textile industry, a strategic supplier of goods to the U.S. military and PPE, is experiencing severe demand destruction fueled by 4 million de minimis shipments a day flooding our market with cheap, often illegal imports because of this outdated trade provision that rewards Chinese e-commerce platforms, importers and tariff cheaters with an open door to the U.S. market.

“The administration’s decision to initiate the rulemaking process in its final days is a significant and meaningful action for our domestic industry and that of other manufacturing sectors. We urge CBP to expedite the rulemaking process to the fullest extent possible and appreciate the agency’s strong engagement with our industry.

“Further, we strongly urge the incoming Trump administration to not only endorse this proposed rulemaking but to expeditiously implement a comprehensive solution to the growing de minimis problem beyond the action announced today. Noting the magnitude of the problem, and the inability of CBP to effectively enforce our trade laws with the flood of de minimis packages coming in daily, we are calling on President-elect Donald Trump to take immediate steps to end de minimis by executive order. We are also pressing Congress to work together with the new administration on a permanent and comprehensive solution to immediately close this disastrous loophole once and for all.

“We are strongly committed to working with CBP on the rulemaking process as well as the Trump administration and both sides of the aisle in Congress to get this done immediately to help provide relief to this most impacted industry and others. “

More information:
NCTO customs China digital platform
Source:

National Council of Textile Organizations

24.01.2025

The application round for AVK Innovation Award 2025 open

The AVK awards prizes for the best innovations in the field of fiber-reinforced plastics (FRP) / composites

The categories:

  • Innovative products/applications
  • Innovative procedures/processes
  • Research and science

Application criteria

The AVK awards prizes for the best innovations in the field of fiber-reinforced plastics (FRP) / composites

The categories:

  • Innovative products/applications
  • Innovative procedures/processes
  • Research and science

Application criteria

  • Prize for innovative products and applications
    - Degree of realization of the product innovation
    - Innovation level
    - Market opportunities
    - Sustainability
  • Prize for innovative processes and procedures
    - Degree of realization of the process innovation
    - Innovation level
    - Improving effectiveness and efficiency
    - Sustainability
  • Prize for research/science (awarded to colleges, universities and institutes)
    - Outstanding scientific work
    - Innovation level
    - Feasibility
    - Sustainability

One aim of the Innovation Award is to promote new products/components and applications made of fiber-reinforced plastics (FRP) and to promote new methods and processes for manufacturing these FRP products. Another prize is awarded to universities, colleges and institutes for outstanding scientific work in research and science. In all categories, special emphasis is placed on the topic of “sustainability”.

A further aim is to honor the innovations and the companies/institutions behind them and thus present the performance of the entire composites industry to the public. The entries will be judged by a high-caliber jury of experts from the composites sector.

The award ceremony will take place on October 21, 2025 during the JEC Forum DACH in Dresden (October 21-22, 2025).

More information:
AVK innovation award
Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

SUSTAIN! Pop-Up-Market & Konferenz (c) Oya-Studios
24.01.2025

SUSTAIN! Pop-Up-Market & Konferenz, Düsseldorf Fashion Days

Fair Fashion & Design made in Düsseldorf: Am Samstag, den 25. Januar 2025 findet im Rahmen der 2025er Winter Edition der Düsseldorf Fashion Days die zweite Ausgabe des Formats SUSTAIN! statt. Nach der erfolgreichen Premiere 2024 im Bilker Bunker zieht SUSTAIN! nun in die Jugendstilvilla Fürstenpalais auf den Fürstenwall. Auf vier Etagen bildet SUSTAIN! hier im Rahmen eines eintägigen Pop-Up-Marktes eine Momentaufnahme von knapp 20 lokalen und regionalen Labels ab, die in den Bereichen Fashion & Design einen nachhaltigen Ansatz verfolgen.

Fair Fashion & Design made in Düsseldorf: Am Samstag, den 25. Januar 2025 findet im Rahmen der 2025er Winter Edition der Düsseldorf Fashion Days die zweite Ausgabe des Formats SUSTAIN! statt. Nach der erfolgreichen Premiere 2024 im Bilker Bunker zieht SUSTAIN! nun in die Jugendstilvilla Fürstenpalais auf den Fürstenwall. Auf vier Etagen bildet SUSTAIN! hier im Rahmen eines eintägigen Pop-Up-Marktes eine Momentaufnahme von knapp 20 lokalen und regionalen Labels ab, die in den Bereichen Fashion & Design einen nachhaltigen Ansatz verfolgen.

Mit dabei sind 305 care (Beauty) | Atelier Goldfisch (Jewellery) | Avonté (Homewear) | BUY GOOD STUFF | AMD Düsseldorf (Magazine) | COSH x Igedo Exhibition’s Fashion Aware Club| Cutoffs | (Interior Accessories) | ERDEN (Jewellery) | FREITAG Workshop (Bags & Accessories) | Harriet Allure (Scented Candles) | HSD PBSA • New Craft Object Design (Design) | Jimu Kobayashi (Ceramics) |  Lucky Cat Studio Siebdruck (Printing Studio) | Matchasome (Matcha Drinks & Products) | Orfèvre (Jewellery) | OYA Studio (Fashion) | PURSIK.boxers (Fashion) | Studio Orf (Accessories) | studio rosa (Accessories) | suzusan (Fashion) | TONI (Upcycled Fashion) | Two Brothers Vintage (Vintage Apparel & Accessories) | WEIRD SPACE (Specialty Coffee)

Die überwiegend lokalen Brands und Designer:innen präsentieren und verkaufen ihre Kollektionen und Produkte und geben spannende Einblicke in ihre Arbeitsweisen Begleitet wird der Markt von Workshops vom Schweizer Label FREITAG, das einen Store auf der Düsseldorfer Hohe Straße betreibt sowie dem Düsseldorfer Druckstudio Lucky Cat Studio.

Die von der Wirtschaftsförderung Düsseldorf initiierte und vom Düsseldorfer Magazin THE DORF kuratierte Veranstaltung soll abbilden, welche Ausprägungen der Nachhaltigkeit sich in Zukunft in der Mode- und Lifestyle-Branche etablieren könnten und will neue Impulse und Sichtweisen vermitteln. Der Eintritt zum Pop-Up-Markt ist frei.
 
Neu ist der HopOn-HopOff-Bus, der in Zusammenarbeit mit Visit Düsseldorf in einer guided Green Fashion Tour verschiedene „ecofriendly“ Konzepte im Düsseldorfer Stadtbereich anfährt.

Photo ACM Group
24.01.2025

ACM: ISO14001 certification & new Code of Ethics

ACM Group, with over forty years of expertise in designing and producing accessories for leading high-fashion houses, continues to strengthen its position as a model of excellence. This commitment is marked by two significant milestones: achieving the ISO14001 certification and introducing a new Code of Ethics.

These achievements highlight ACM Group's enduring commitment to conducting business responsibly. This dedication is further reflected in its integrated and transparent communication with both internal and external stakeholders. By combining tradition, innovation, and social responsibility, ACM's ethical approach reaches all areas of the company.

ACM Group, with over forty years of expertise in designing and producing accessories for leading high-fashion houses, continues to strengthen its position as a model of excellence. This commitment is marked by two significant milestones: achieving the ISO14001 certification and introducing a new Code of Ethics.

These achievements highlight ACM Group's enduring commitment to conducting business responsibly. This dedication is further reflected in its integrated and transparent communication with both internal and external stakeholders. By combining tradition, innovation, and social responsibility, ACM's ethical approach reaches all areas of the company.

ISO14001 Certification: a strong commitment to the environment
Achieved in 2024, the ISO14001 certification highlights ACM's ability to design and implement an eMective and responsible environmental management system. This milestone reflects the company's forward-looking policies, including the total recycling of water (a system inaugurated in 1992), the use of renewable energy sources, and the use of certified materials with low environmental impact. ACM also prioritizes recycled and traceable materials throughout its production chain, certified under the Global Recycled Standard (GRS).

"ISO14001 certification is a confirmation and gratification of our way of doing business: it is not the finish line, but the start of a journey towards even more ambitious goals in terms of environmental sustainability,” says ACM management. The company's approach is not limited to processes and materials but extends to every aspect of its operations. In ist outdoor spaces, ACM has recently created, in collaboration with 3Bee, a biodiversity oasis that is home to bees and other pollinating insects. This is a small gesture that demonstrates attention to environmental respect in every detail of fashion and beyond.

A Code of Ethics to chart the course
ACM's new Code of Ethics serves as a fundamental pillar to reinforce the principles that have always guided the company, with a strong focus on the well-being of the working environment in all its aspects. Transparency, respect for people, and attention to the environment are central to this document, which provides clear guidelines for responsible behavior in every professional relationship. This code is more than a formal commitment; it serves as a practical framework for ACM to build an open and constructive dialogue with customers, suppliers, and partners.

Source:

ACM Group

24.01.2025

Kornit Digital: Printful Raises the Bar for Print-on-Demand Quality

Global ecommerce platform and leader in on-demand merchandise production now leverages 86 Kornit Atlas MAX systems across its global fulfillment network Long Beach, CA – Impressions Expo Long Beach – January 23, 2025 —Printful, the global ecommerce platform and leader in on-demand merchandise production, announced the company has significantly upgraded its ability to empower creators, entrepreneurs, and businesses of all sizes by expanding its direct-to-garment (DTG) printer resources – further solidifying its position as an industry innovator. By integrating added units of the innovative Atlas MAX technology from Kornit Digital, Printful is setting a new benchmark for print quality and color consistency, delivering the best results in the industry for ist customers worldwide.

Global ecommerce platform and leader in on-demand merchandise production now leverages 86 Kornit Atlas MAX systems across its global fulfillment network Long Beach, CA – Impressions Expo Long Beach – January 23, 2025 —Printful, the global ecommerce platform and leader in on-demand merchandise production, announced the company has significantly upgraded its ability to empower creators, entrepreneurs, and businesses of all sizes by expanding its direct-to-garment (DTG) printer resources – further solidifying its position as an industry innovator. By integrating added units of the innovative Atlas MAX technology from Kornit Digital, Printful is setting a new benchmark for print quality and color consistency, delivering the best results in the industry for ist customers worldwide.

Both Printful and Kornit will be exclusively discussing their partnership at Impressions Expo in Long Beach, CA on January 23-25. The expanded partnership equips Printful with an unmatched 86 Atlas MAX systems across ist global fulfillment network, making them the industry leader in print on-demand DTG. Since 2015, the company has invested tens of millions of dollars in upgrading its DTG printing solutions to ensure advanced print quality and reliability for its millions of customers. Renowned for producing vibrant, durable prints with remarkable precision, Atlas MAX technology guarantees that every product meets Printful’s ambitious standards for quality and reliability - something for which Printful merchants around the world have come to rely.

The adoption of Atlas MAX fully reinforces Printful’s sustainability goals, offering a more eco-conscious printing solution with reduced waste and a smaller environmental footprint, aligning with the growing demand for sustainable practices in the ecommerce and printing industries.

This equipment upgrade is part of Printful’s larger mission to enhance its global fulfillment network and support its customers in building successful businesses. The advanced technology ensures superior results across its entire catalog of custom products, from t-shirts and hoodies to tote bags and beyond, all while supporting the speed and scalability for which Printful is known.

Source:

Kornit Digital

Antoine Griezmann neuer Decathlon-Botschafter Foto Decathlon
24.01.2025

Antoine Griezmann neuer Decathlon-Botschafter

Decathlon ist offizieller Hersteller der Spielbälle für die UEFA Europa League, die UEFA Europa Conference League, die Ligue 1 Mc Donald's, die Ligue 2 BKT in Frankreich und die Jupiler Pro League in Belgien. Jetzt wird das Unternehmen offizieller Ausrüster von Antoine Griezmann.
 
Der Gewinner des Goldenen Schuhs der Euro 2016 und Rekordtorschütze von Atlético Madrid trägt seit Ende 2024 eine geschwärzte Version des CLR, KIPSTAs High-Speed-Stollenschuhe. Mit diesem Modell hat er bereits neun Tore erzielt, davon drei in der Champions League. Der französische Stürmer wird weiterhin die Schuhe von KIPSTA tragen und sich aktiv an der Mitgestaltung zukünftiger Fußballschuhmodelle von Decathlon beteiligen.

Decathlon ist offizieller Hersteller der Spielbälle für die UEFA Europa League, die UEFA Europa Conference League, die Ligue 1 Mc Donald's, die Ligue 2 BKT in Frankreich und die Jupiler Pro League in Belgien. Jetzt wird das Unternehmen offizieller Ausrüster von Antoine Griezmann.
 
Der Gewinner des Goldenen Schuhs der Euro 2016 und Rekordtorschütze von Atlético Madrid trägt seit Ende 2024 eine geschwärzte Version des CLR, KIPSTAs High-Speed-Stollenschuhe. Mit diesem Modell hat er bereits neun Tore erzielt, davon drei in der Champions League. Der französische Stürmer wird weiterhin die Schuhe von KIPSTA tragen und sich aktiv an der Mitgestaltung zukünftiger Fußballschuhmodelle von Decathlon beteiligen.

 
Decathlon führt damit sein strategisches Ziel fort, sich an wichtigen Partnerschaften wie den Olympischen und Paralympischen Spielen in Paris 2024 oder dem Profi-Radsportteam DECATHLON-AG2R LA MONDIALE zu beteiligen.
 
Die Partnerschaft mit Antoine Griezmann ist ein bedeutender Schritt, um Decathlon als wichtigen Akteur in der Welt des Elitefußballs zu positionieren und gleichzeitig sein Engagement für sportliche Spitzenleistungen, Innovation und die Vermittlung positiver Werte zu stärken.
 
Diese neue Zusammenarbeit mit Antoine Griezmann – der als einer der präzisesten und technisch versiertesten Spieler seiner Generation gilt – ist ein weiterer Beweis für das Engagement der Marke, ihren Kund:innen Expertenprodukte zu bieten. Durch authentische Mitgestaltung der Produkte durch den Stürmer von Atlético Madrid treibt KIPSTA die Grenzen der Leistungsfähigkeit voran.

More information:
Decathlon Fußball Sportschuhe
Source:

Decathlon

23.01.2025

Autoneum: Again Revenue Growth in the 2024

In the 2024 financial year, the global automotive industry recorded a slight decline in produc-tion of –1.1%* compared to the previous year. In this weakening environment, Autoneum in-creased its consolidated revenue in Swiss francs by CHF 36.4 million to CHF 2 338.7 million. Excluding translational effects from the conversion of local currencies into Swiss francs, revenue rose by CHF 96.1 million or 4.2% to CHF 2 398.5 million, which is in the middle of the guidance of CHF 2.3 billion to CHF 2.5 billion. Based on the preliminary figures, Autoneum expects an EBIT margin of over 5% and free cash flow of just over CHF 100 million for the 2024 financial year, thus fully confirming the guidance.

In the 2024 financial year, the global automotive industry recorded a slight decline in produc-tion of –1.1%* compared to the previous year. In this weakening environment, Autoneum in-creased its consolidated revenue in Swiss francs by CHF 36.4 million to CHF 2 338.7 million. Excluding translational effects from the conversion of local currencies into Swiss francs, revenue rose by CHF 96.1 million or 4.2% to CHF 2 398.5 million, which is in the middle of the guidance of CHF 2.3 billion to CHF 2.5 billion. Based on the preliminary figures, Autoneum expects an EBIT margin of over 5% and free cash flow of just over CHF 100 million for the 2024 financial year, thus fully confirming the guidance.

Business Group Europe achieved revenue of CHF 1 152.4 million in the 2024 financial year, an increase of CHF 78.5 million compared to CHF 1 073.9 million in the previous year. In local curren-cies, revenue grew by 9.8%. The first-time consolidation of four instead of three quarters of Borgers Automotive, which was acquired in 2023, resulted in an inorganic increase of 13.0%. Organically, revenue in local currencies declined by 3.2%, outperforming the market, which recorded a decline of 4.6%*.

Business Group North America outperformed the market in local currencies: while vehicle pro-duction fell by 1.4%* overall, Business Group North America recorded a slight increase of 1.3% in revenue. Borgers Automotive made a positive contribution of 3.0% to inorganic growth, while the organic revenue change was –1.7%. Consolidated revenue in Swiss francs amounted to CHF 884.6 million. (2023: CHF 895.9 million).

Business Group Asia generated revenue of CHF 198.3 million in Swiss francs, which was CHF 44.5 million below the previous year (2023: CHF 242.8 million). In local currencies, revenue shrank by 15.3% overall. The organic decline in revenue amounted to 16.6%, while the additional first quarter of Borgers Automotive, which was acquired in 2023, had a positive impact of 1.3% in the reporting year. The market in Asia remained stable with a growth of 0.1%*. In 2024, local Chinese vehicle manufacturers continued to gain market share in China at the expense of Japanese and European producers, which was clearly reflected in the revenue development of Business Group Asia. This trend underlines the importance of the acquisition of the Chinese Jiangsu Huanyu Group, announced on November 19, 2024, which generates over 90% of its reve-nue with Chinese car manufacturers in China and will significantly strengthen Autoneum's market position.

Business Group SAMEA (South America, Middle East and Africa) achieved revenue growth of 14.4% in local currencies, mainly due to inflation-related price increases. In Swiss francs, revenue amounted to CHF 121.4 million. This corresponds to an increase of CHF 12.4 million or 11.3% compared to the previous year.

Source:

Autoneum Management AG

Courtney Harold Photo Green Theme Technologies
Courtney Harold
23.01.2025

New Head of Marketing at Green Theme Technologies

Green Theme Technologies (GTT) has appointed Courtney Harold as Head of Marketing. With over 25 years of experience in the textile, apparel, and footwear industries, Courtney brings a proven track record of transforming complex challenges into clear, actionable strategies that drive growth and product innovation.

“I am thrilled to join GTT and help lead the initiative to bring EMPEL’s innovative, water-free, and PFAS-free DWR technology to market,” said Courtney Harold. “GTT’s commitment to surpassing industry standards is precisely the challenge fueling my passion for solving complex problems. I look forward to spearheading the marketing initiatives to position EMPEL as the leading brand in the DWR sustainable performance fabrics.”

Courtney’s career began at Hill Holliday Advertising, where she built a solid foundation for creating impactful value propositions for the retailer Marshalls. She continued to enhance this foundation as a member of the inaugural branding team at Polartec, contributing to the development of a leading brand that resonates with both consumers and industry professionals.

Green Theme Technologies (GTT) has appointed Courtney Harold as Head of Marketing. With over 25 years of experience in the textile, apparel, and footwear industries, Courtney brings a proven track record of transforming complex challenges into clear, actionable strategies that drive growth and product innovation.

“I am thrilled to join GTT and help lead the initiative to bring EMPEL’s innovative, water-free, and PFAS-free DWR technology to market,” said Courtney Harold. “GTT’s commitment to surpassing industry standards is precisely the challenge fueling my passion for solving complex problems. I look forward to spearheading the marketing initiatives to position EMPEL as the leading brand in the DWR sustainable performance fabrics.”

Courtney’s career began at Hill Holliday Advertising, where she built a solid foundation for creating impactful value propositions for the retailer Marshalls. She continued to enhance this foundation as a member of the inaugural branding team at Polartec, contributing to the development of a leading brand that resonates with both consumers and industry professionals.

At Sappi Release Papers, Courtney led efforts to establish specification programs targeted at apparel and footwear product developers, resulting in a unique partnership with Nike.

For over 10 years, Courtney launched the first footwear supplier tradeshow for the world’s largest footwear tradeshow and staged the MAGIC apparel tradeshow in China, a highly complex market. She has also developed market entry strategies for several fashion, outdoor, and apparel brands entering the Chinese market, enhancing her knowledge and understanding of the supply chain, the global retail sector, and the crucial connection between product development and market positioning.

Source:

Green Theme Technologies

PRO Forum Photo (c) Euratex
23.01.2025

Harmonizing textiles EPR implementation to support Circular Economy in Europe

The undersigned PROs and business associations launched the Textile PRO Forum, a unique voluntary initiative designed to harmonise and share best practices for effective and efficient implementation of the Extended Producer Responsibility for textiles and footwear (Textiles EPR) across Europe.

As Europe prepares for the mandatory separate collection of textile waste and with the revision of the Waste Framework Directive entering its final stage, the EPR schemes have become a cornerstone of the European strategy for sustainability and circularity of textiles.

These EPR schemes and the related PROs will operate differently in each EU Member State, reflecting national legislation, market conditions, and infrastructure. While this diversity reflects local features, it also presents a challenge for efficiency and for businesses which will face the complexity of up to 27 different EPR models for textiles.

The undersigned PROs and business associations launched the Textile PRO Forum, a unique voluntary initiative designed to harmonise and share best practices for effective and efficient implementation of the Extended Producer Responsibility for textiles and footwear (Textiles EPR) across Europe.

As Europe prepares for the mandatory separate collection of textile waste and with the revision of the Waste Framework Directive entering its final stage, the EPR schemes have become a cornerstone of the European strategy for sustainability and circularity of textiles.

These EPR schemes and the related PROs will operate differently in each EU Member State, reflecting national legislation, market conditions, and infrastructure. While this diversity reflects local features, it also presents a challenge for efficiency and for businesses which will face the complexity of up to 27 different EPR models for textiles.

The Textile PRO Forum addresses this need by bringing together experienced PROs and national business associations engaged in the implementation of the Textile EPRs. Its mission is to foster collaboration, harmonization, and knowledge-sharing among the Textile EPR Producer Responsibility Organizations (PROs).

Initiated by Refashion, the first PRO for textiles, and by EURATEX, the European Textile and Apparel Confederation, the Textile PRO Forum is coordinated by EURATEX. The initial key activities include the Forum set up and the following strategic workstreams:

  • Reduce administrative burden
  • Harmonize approaches to implement the eco-modulation fees, set by legislation
  • Supporting recycling
  • Harmonise framework
  • Set up, creation and expansion of PROs

List of the participating organizations

  1. Asociación para la Gestión del Residuo Textil y Calzado
  2. ATOK
  3. Cobat Tessile
  4. Comeos
  5. Creamoda
  6. Danish Fashion & Textile
  7. Electrao
  8. Erion Textiles
  9. EURATEX
  10. Fedustria
  11. Finnish Textile & Fashion
  12. Gesamtverband Textil- und Mode
  13. Inretail
  14. Modint
  15. Reconomy / Redress
  16. Recydata
  17. Refashion
  18. RETEX.Green
  19. Retur
  20. REFABRIK
  21. Stichting Producentenorganisatie UPV Textiel
  22. TEKO – Swedish Textile and Fashion Industries
23.01.2025

Kelheim Fibres: Sustainability Report Including EMAS Environmental Statement

Kelheim Fibres, a leading manufacturer of specialty viscose fibres, has published their comprehensive sustainability report. By doing so, the company is setting another milestone for transparency while simultaneously emphasizing its commitment to the goals of the UN Global Compact.

An integral part of the sustainability report is the EMAS Environmental Statement, which – as it has been annually since 2020 – was audited by independent environmental experts as part of the EMAS (Eco-Management and Audit Scheme) revalidation. This confirms Kelheim Fibres’ high environmental performance and its continuous efforts towards sustainable corporate governance.

The sustainability report goes beyond mere environmental performance and addresses all aspects of Corporate Social Responsibility (CSR).

Kelheim Fibres, a leading manufacturer of specialty viscose fibres, has published their comprehensive sustainability report. By doing so, the company is setting another milestone for transparency while simultaneously emphasizing its commitment to the goals of the UN Global Compact.

An integral part of the sustainability report is the EMAS Environmental Statement, which – as it has been annually since 2020 – was audited by independent environmental experts as part of the EMAS (Eco-Management and Audit Scheme) revalidation. This confirms Kelheim Fibres’ high environmental performance and its continuous efforts towards sustainable corporate governance.

The sustainability report goes beyond mere environmental performance and addresses all aspects of Corporate Social Responsibility (CSR).

“Credibility and trust are based on transparency. With our new sustainability report, we demonstrate how we fulfil our responsibility for both people and the environment – and the contribution we make with our biodegradable fibres to combating one of the biggest global problems of our time, the growing plastic waste,” explains Wolfgang Ott, Head of CSR at Kelheim Fibres. The viscose fibres made from 100% plant-based raw materials represent a powerful alternative to conventional plastics in numerous applications and thus help reduce global waste.

Source:

Kelheim Fibres GmbH

Baumwollmützen (c) Canva
22.01.2025

Gefahrenwarnung vor Mikroplastik?

Mikroplastik ist allgegenwärtig, und Hinweise auf ernsthafte Schäden nehmen zu. Studien haben Mikro- und Nanoplastik mit Herzinfarkten, Schlaganfällen oder Todesfällen in Verbindung gebracht, man findet Mikroplastik im Knochenmark von Leukämiepatienten und in Gehirnen von Demenzpatienten. Die Proben solcher Demenzpatienten, einschließlich Alzheimer-Erkrankten, enthielten bis zu zehnmal mehr Plastikpartikel als gesunde Proben.

Die Analytikerin Veronica Bates Kassatly und der Statistiker Dr. Terry Townsend haben einen Bericht zum Thema Mikroplastik zusammengestellt, der nun von der Bremer Baumwollbörse herausgegeben wird.

Ein zentraler Aspekt der Besorgnis sind die mit diesen synthetischen Textilpolymeren verbundenen Chemikalien. Etwa 2.566 Chemikalien werden entweder für die Verwendung in PET vermarktet, sind in PET vorhanden oder werden aus PET freigesetzt. Nur 31 davon sind als nicht gefährlich bekannt, 31 % sind als gefährlich bekannt, aber für die überwiegende Mehrheit liegen keine Gefährdungsdaten vor.

Mikroplastik ist allgegenwärtig, und Hinweise auf ernsthafte Schäden nehmen zu. Studien haben Mikro- und Nanoplastik mit Herzinfarkten, Schlaganfällen oder Todesfällen in Verbindung gebracht, man findet Mikroplastik im Knochenmark von Leukämiepatienten und in Gehirnen von Demenzpatienten. Die Proben solcher Demenzpatienten, einschließlich Alzheimer-Erkrankten, enthielten bis zu zehnmal mehr Plastikpartikel als gesunde Proben.

Die Analytikerin Veronica Bates Kassatly und der Statistiker Dr. Terry Townsend haben einen Bericht zum Thema Mikroplastik zusammengestellt, der nun von der Bremer Baumwollbörse herausgegeben wird.

Ein zentraler Aspekt der Besorgnis sind die mit diesen synthetischen Textilpolymeren verbundenen Chemikalien. Etwa 2.566 Chemikalien werden entweder für die Verwendung in PET vermarktet, sind in PET vorhanden oder werden aus PET freigesetzt. Nur 31 davon sind als nicht gefährlich bekannt, 31 % sind als gefährlich bekannt, aber für die überwiegende Mehrheit liegen keine Gefährdungsdaten vor.

Daher stellen Plastikmikrofasern eine völlig andere Gefahrenkategorie als andere Mikrofasern dar und müssen in Lebenszyklusanalysen (LCA) und Product Environmental Footprints (PEF) entsprechend behandelt werden. In Anerkennung dieses grundlegenden Unterschieds spezifizierte die Resolution der Europäischen Kommission vom März 2024 zur Green Claims Directive, dass der PEF für Bekleidung und Schuhe eine Mikroplastikbewertung enthalten muss.

Interessenkonflikte statt Wissenschaft
Allerdings stammen die Quellen, die sowohl von den französischen als auch den EU-PEFs zur Bewertung der Mikrofaserauswirkungen herangezogen werden, nicht von wissenschaftlichen Organisationen, sondern von Einrichtungen, die von Interessengruppen mit Eigeninteressen geschaffen und finanziert wurden. Die Interessenkonflikte, die sich aus der Beteiligung von Akteuren ergeben, die eng mit der Produktion von Plastikbekleidung verbunden sind, untergraben die wissenschaftlichen Grundlagen der Umweltgesetzgebung und behindern das effektive Management langfristiger Umweltprobleme.

Lebenszyklusanalysen und PEFs in der Modewertschöpfungskette müssen klarstellen, dass Plastikfasern gefährliche Chemikalien enthalten und solche Fasern während des gesamten Lebenszyklus des Artikels eine Exposition gegenüber verschiedenen Chemikalien verursachen können.

In ihrem 31-seitigen Bericht über die Behandlung von Mikroplastik in LCA- und PEF-Anwendungen empfehlen Veronica Bates Kassatly und Terry Townsend, dass, ebenso wie Verpackungen für Tabakprodukte einen Warnhinweis enthalten müssen, ein Warnhinweis auf Verpackungen aller Produkte mit synthetischen Fasern angebracht werden sollte.

Der Bericht wurde mit finanzieller Unterstützung von Cotton Incorporated veröffentlicht und steht als elektronische Version auf der BBB-Webseite zum Download bereit.

Source:

Bremer Baumwollbörse

22.01.2025

Südwesttextil: Tarifforderung der IG Metall "verantwortungslos"

Energiepreise im Dauerhoch, drastisch steigende Lohnnebenkosten, ein angespannter globaler Markt, Stellenabbau, Insolvenzen und Produktions-Verlagerungen ins Ausland. Diese Hiobsbotschaften gehören mittlerweile zum Alltag der deutschen Wirtschaft und der Betriebe der Textil- und Bekleidungsindustrie. Vor diesem Hintergrund nennt der baden-württembergische Textil- und Bekleidungsverband ist die zweithöchste Forderung der IG Metall seit über 20 Jahren „realitätsblind“.

Die IG Metall hat mit ihrer heute veröffentlichten Forderung von 6,5 Prozent für 12 Monate gezeigt, dass sie jeglichen Realitätssinn vermissen lasse. „Die Forderung ist unrealistisch und gefährdet die Wettbewerbsfähigkeit unserer Unternehmen weiter. Es ist höchste Zeit, dass die IG Metall die äußerst schwierige Lage der Textil- und Bekleidungsindustrie anerkennt“, erklärt Markus Simon, Verhandlungsführer der Arbeitgeber.

Energiepreise im Dauerhoch, drastisch steigende Lohnnebenkosten, ein angespannter globaler Markt, Stellenabbau, Insolvenzen und Produktions-Verlagerungen ins Ausland. Diese Hiobsbotschaften gehören mittlerweile zum Alltag der deutschen Wirtschaft und der Betriebe der Textil- und Bekleidungsindustrie. Vor diesem Hintergrund nennt der baden-württembergische Textil- und Bekleidungsverband ist die zweithöchste Forderung der IG Metall seit über 20 Jahren „realitätsblind“.

Die IG Metall hat mit ihrer heute veröffentlichten Forderung von 6,5 Prozent für 12 Monate gezeigt, dass sie jeglichen Realitätssinn vermissen lasse. „Die Forderung ist unrealistisch und gefährdet die Wettbewerbsfähigkeit unserer Unternehmen weiter. Es ist höchste Zeit, dass die IG Metall die äußerst schwierige Lage der Textil- und Bekleidungsindustrie anerkennt“, erklärt Markus Simon, Verhandlungsführer der Arbeitgeber.

Die wirtschaftliche Lage in der Branche ist immens angespannt. Sowohl die Textil- als auch die Bekleidungshersteller verzeichneten über die vergangenen fünf Jahre reale Umsatzeinbußen von über 20 Prozent. Dabei hatten sich viele Unternehmen nach dem Einbruch durch die Corona-Pandemie unter großen Mühen und mit viel Kraft wieder an ihre Geschäftsergebnisse vor den Corona-Lockdowns herangearbeitet. Nun sind alle Zahlen erneut im Minus: Beschäftigung, inländische Produktion, Export, Auftragseingänge und -bestände. Besonders alarmierend sei jedoch, dass die Zahl der Betriebe im vergangenen Jahr noch einmal deutlich gesunken ist: bei Textil um minus 3,7 Prozent, bei Bekleidung um minus 7,7 Prozent. Auch die Zahl der Firmenpleiten sei auf Rekordniveau. Im vergangenen Jahr meldeten bis Oktober 30 Bekleidungsunternehmen Insolvenz an, 12 mehr als im Vergleichszeitraum ein Jahr zuvor. Bei Textil stieg die Zahl der Insolvenzen von 31 auf 44 Unternehmen.

Markus Simon: „Es muss nach den wirtschaftlichen und politischen Unsicherheiten der vergangenen Jahre darum gehen, unsere Betriebe wieder wettbewerbsfähig zu machen. Nur so können wir überhaupt noch am Standort Deutschland produzieren.  Die IG Metall weiß nur zu genau, dass wir in einer Krise bisher ungekannten Ausmaßes stecken. Umso weniger ist die Forderung von 6,5 Prozent zu erklären. Nur wenn wir gemeinsam Verantwortung zeigen, können wir diese schwierige Situation meistern.“

Deutschland befindet sich im zweiten Rezessionsjahr in Folge. Nach Zahlen des Instituts der Deutschen Wirtschaft (IW) handelt es sich inzwischen um die längste Wirtschaftskrise seit Gründung der Bundesrepublik. Das Bruttoinlandsprodukt je Einwohner lag 2024 unter dem Niveau von 2018. Der Abstand zum langfristigen Wachstumstrend beträgt 6,5 Prozent. Anstatt – wie bei vorherigen Krisen auch – wieder auf den Wachstumspfad zurückkehren, seien die Aussichten auch für dieses Jahr besorgniserregend schlecht, so der Verband.

Source:

Verband der Südwestdeutschen Textil- und Bekleidungsindustrie Südwesttextil

Team 11 präsentierte dem Publikum im Audimax mehrere Prototypen eines Textilschäkels. Copyright: Team 11/HSNR
Team 11 präsentierte dem Publikum im Audimax mehrere Prototypen eines Textilschäkels.
22.01.2025

Hochschule Niederrhein: Studierende zeigen kreative Ideen

Eine der beliebtesten Veranstaltungen am Fachbereich Textil- und Bekleidungstechnik der Hochschule Niederrhein (HSNR) ist die Präsentation der kreativen Projektarbeiten aus dem 5. Semester. In diesem Jahr setzten zwölf Teams die Aufgaben der überwiegend externen Themensteller:innen um. Die Teams, die sowohl deutsch- als auch englischsprachig waren, wurden interdisziplinär aus den verschiedenen Bachelor-Studiengängen des Fachbereichs zusammengestellt und den Projektthemen der Themensteller zugelost. Ziel war es, innovative, nachhaltige und ressourcenschonende Lösungen zu entwickeln. Die Lehrveranstaltung „Projekte“ gibt es seit fast 20 Jahren. Studierende erwerben und vertiefen wichtige Fähigkeiten wie Teamwork, Kommunikation, Kreativität, interkulturelle Kompetenz und methodische Fertigkeiten.

Eine der beliebtesten Veranstaltungen am Fachbereich Textil- und Bekleidungstechnik der Hochschule Niederrhein (HSNR) ist die Präsentation der kreativen Projektarbeiten aus dem 5. Semester. In diesem Jahr setzten zwölf Teams die Aufgaben der überwiegend externen Themensteller:innen um. Die Teams, die sowohl deutsch- als auch englischsprachig waren, wurden interdisziplinär aus den verschiedenen Bachelor-Studiengängen des Fachbereichs zusammengestellt und den Projektthemen der Themensteller zugelost. Ziel war es, innovative, nachhaltige und ressourcenschonende Lösungen zu entwickeln. Die Lehrveranstaltung „Projekte“ gibt es seit fast 20 Jahren. Studierende erwerben und vertiefen wichtige Fähigkeiten wie Teamwork, Kommunikation, Kreativität, interkulturelle Kompetenz und methodische Fertigkeiten.

Das Team 11 ging als klares Gewinnerteam hervor. Es überzeugte das Publikum im Hörsaal vor allem mit einer gelungenen Präsentation im Stil einer Oscar-Verleihung. Neun Studierende entwickelten in Zusammenarbeit mit der Gleitstein GmbH, einem führenden Traditionsunternehmen der Seilindustrie, fünf verschiedene Textilschäkel-Prototypen. Die bestehenden Textilschäkel aus Dyneema®-Hochleistungsfasern, mit einer Tragfähigkeit von zehn Tonnen bieten eine leichte, moderne und robuste Alternative zu herkömmlichen Metallschäkeln. Diese wurden vom Team durch kreative Lösungen um eine erforderliche zweite Sicherung ergänzt., die ein unbeabsichtigtes Lösen der Verbindung verhindern soll.

Das Team 4, bestehend aus zehn Studierenden, entwarf eine smarte Weste, die nicht nur wärmen, sondern auch die Sichtbarkeit im Straßenverkehr erhöhen soll. Gemeinsam mit dem Themensteller, der Gebrüder Jaeger GmbH aus Wuppertal, entwickelten die Studierenden eine stylische, sichere und intelligente Weste, die für verschiedene Outdoor- und Indoor-Aktivitäten genutzt werden kann. Zusätzlich wurde in das entwickelte Schmaltextil leuchtender Elektrolumineszenz-Draht eingewoben.

Wie könnte die Bekleidungsindustrie in 25 Jahren in Bezug auf ökologische und soziale Faktoren aussehen? Mit dieser Frage beschäftigten sich acht Studierende des Team 8. In Zusammenarbeit mit dem gemeinnützigen Verein Femnet e.V. aus Bonn entwickelten sie Bildungsmaterialien zu möglichen Zukunftsszenarien der Bekleidungsindustrie. Ziel war es, Jugendliche im Alter von 12 bis 18 Jahren für die globalen Zusammenhänge der Wirtschaft zu sensibilisieren. Ihre Rechercheergebnisse arbeitete das Team visuell aus und erstellte zwei digitale Wimmelbilder sowie zwei Collagen, zu denen zusätzlich jeweils eine Geschichte im Storytelling-Format geschrieben wurde. Ein schriftliches Handbuch mit Hintergrundinformationen ergänzte die Ausarbeitungen.

Zur Musik von Lady Gagas Hit „Born this Way“ präsentierten Models die diverse Merchandise-Kollektion des Team 10. T-Shirts, Hoodies Baumwolltaschen: Die zehn Studierenden entwarfen neue Kleidungsstücke und Accessoires für den Campus Shop der Hochschule Niederrhein. Impulse für die Kollektion erhielten sie durch Interviews, in denen Studierende ihre Erfahrungen mit Vielfalt und Inklusion an der HSNR teilten. Für die Kollektion verwendeten sie nachhaltige Materialien, zeitgemäße Schnitte und vielseitige Passformen. Ein Highlight sind die flexiblen Gestaltungsmöglichkeiten, die es den Träger:innen ermöglichen, ihre Individualität und Kreativität auszudrücken. Die Studierenden reichten das Thema selbst ein, um die Vielfalt am Campus sichtbarer zu machen und aktiv zu fördern.

Für Team 9 ging es nach Österreich: Sie entwickelten ein innovatives Nachhaltigkeitskonzept für die Salzburger Festspiele, das vor allem die nachhaltige Gestaltung der Kostüme im Fokus hatte. Der dafür erstellte Leitfaden umfasst unter anderem nachhaltige Materialien, Methoden zur Prozessoptimierung und innovative Veredlungstechniken. Ihre haptischen Ergebnisse hielten die neun Studentinnen in einem modularen „Baukasten“ fest. Zusätzlich entwarfen sie gemäß ihres Leitfadens ein nachhaltiges Kostüm für die „Schreienden Münder“, das in der kommenden Pfingstproduktion „Hotel Metamorphosis“ eine tragende Rolle spielen wird.

Team 5 erhielt von der Sonepar Deutschland GmbH die Aufgabe, spezialisierte Arbeitsbekleidung für das Elektrofachhandwerk zu entwerfen, die sowohl die Sicherheitsanforderungen erfüllt als auch durch innovatives Design überzeugt. Das Ergebnis war eine funktionale Latzhose mit integrierten LED-Leuchten. Die LEDs können per Sprachsteuerung bedient werden und unterstützen die Träger:innen bei Arbeiten in schlecht ausgeleuchteten Bereichen.

 

22.01.2025

Umsatz der baden-württembergischen Textilindustrie weiter im Abwärtstrend

Der Abwärtstrend in der Textilindustrie hat sich im November weiter beschleunigt. In der Bekleidungsindustrie macht sich die Kaufzurückhaltung der Kunden bemerkbar.

Von Januar bis November verzeichnet die baden-württembergische Textilindustrie einen Umsatzrückgang von 8,4 %. Im Monatsvergleich des Novembers sogar ein Minus von 15,1 %. Damit beschleunigt sich der Abwärtstrend der zweiten Jahreshälfte noch einmal und geht auch mit einem gesteigerten Beschäftigungsrückgang von 1 % für den Zeitraum von Januar bis November einher.

Die Bekleidungsindustrie in Baden-Württemberg blickt ebenfalls auf eine Verschlechterung des Auftragseingangs und eine negative Umsatzentwicklung von 2,2 % im Vergleich zum November 2023, die unter anderem auf die Kaufzurückhaltung der Kunden zurückzuführen ist.

Südwesttextil-Hauptgeschäftsführerin Edina Brenner fasst zusammen: „Nach dem zweiten Rezessionsjahr in Folge, sehen wir auch in der baden-württembergischen Textil- und Bekleidungsindustrie wenig Aussicht auf wirtschaftliche Erholung. Wir brauchen daher dringend eine auf die Wirtschaftswende in Deutschland fokussierte Politik.“

Der Abwärtstrend in der Textilindustrie hat sich im November weiter beschleunigt. In der Bekleidungsindustrie macht sich die Kaufzurückhaltung der Kunden bemerkbar.

Von Januar bis November verzeichnet die baden-württembergische Textilindustrie einen Umsatzrückgang von 8,4 %. Im Monatsvergleich des Novembers sogar ein Minus von 15,1 %. Damit beschleunigt sich der Abwärtstrend der zweiten Jahreshälfte noch einmal und geht auch mit einem gesteigerten Beschäftigungsrückgang von 1 % für den Zeitraum von Januar bis November einher.

Die Bekleidungsindustrie in Baden-Württemberg blickt ebenfalls auf eine Verschlechterung des Auftragseingangs und eine negative Umsatzentwicklung von 2,2 % im Vergleich zum November 2023, die unter anderem auf die Kaufzurückhaltung der Kunden zurückzuführen ist.

Südwesttextil-Hauptgeschäftsführerin Edina Brenner fasst zusammen: „Nach dem zweiten Rezessionsjahr in Folge, sehen wir auch in der baden-württembergischen Textil- und Bekleidungsindustrie wenig Aussicht auf wirtschaftliche Erholung. Wir brauchen daher dringend eine auf die Wirtschaftswende in Deutschland fokussierte Politik.“

Vor diesem Hintergrund hat Südwesttextil entscheidende Forderungen für die Bundestagswahl formuliert, die neben Steuersenkungen und dem Abbau von Überregulierungen vor allem die Wettbewerbsfähigkeit stärken sollen.

Source:

Verband der Südwestdeutschen Textil- und Bekleidungsindustrie Südwesttextil e.V.

22.01.2025

MaxTex: Sabine Paulsen folgt auf Gerhard Becker

Unmittelbar nach Gründung 2014 übernahm Gerhard Becker Im Januar 2015 die Geschäftsführung von MaxTex, des kurz davor gegründeten Netzwerks für nachhaltige Textilien. Nach 10 Jahren erfolgreicher Entwicklung - die Mitgliederzahl stieg auf über 50 Unternehmen - erfolgt mit Beginn dieses Jahres der frühzeitig geplante Wechsel bei dieser zentralen Position.

„Ich bin sehr dankbar dafür, dass ich die positive Entwicklung dieses Netzwerks begleiten, mitgestalten und am großen Erfolg teilhaben durfte. Die stets von gegenseitigem Vertrauen geprägte Zusammenarbeit mit allen MaxTexlern hat mir immer sehr viel Spaß gemacht. Mit besonderem Stolz können wir auf den furiosen Start der MaxTex Academy 2021 blicken, die seitdem rund 3000 Mitarbeitende aus mehr als 350 Unternehmen schulen und ausbilden durfte. Nun ist es aber Zeit für einen neuen Lebensabschnitt mit der Familie, auf den ich mich sehr freue“, sagt Gerhard Becker.

Unmittelbar nach Gründung 2014 übernahm Gerhard Becker Im Januar 2015 die Geschäftsführung von MaxTex, des kurz davor gegründeten Netzwerks für nachhaltige Textilien. Nach 10 Jahren erfolgreicher Entwicklung - die Mitgliederzahl stieg auf über 50 Unternehmen - erfolgt mit Beginn dieses Jahres der frühzeitig geplante Wechsel bei dieser zentralen Position.

„Ich bin sehr dankbar dafür, dass ich die positive Entwicklung dieses Netzwerks begleiten, mitgestalten und am großen Erfolg teilhaben durfte. Die stets von gegenseitigem Vertrauen geprägte Zusammenarbeit mit allen MaxTexlern hat mir immer sehr viel Spaß gemacht. Mit besonderem Stolz können wir auf den furiosen Start der MaxTex Academy 2021 blicken, die seitdem rund 3000 Mitarbeitende aus mehr als 350 Unternehmen schulen und ausbilden durfte. Nun ist es aber Zeit für einen neuen Lebensabschnitt mit der Familie, auf den ich mich sehr freue“, sagt Gerhard Becker.

Die neue Geschäftsführerin Sabine Paulsen wird MaxTex und die Mitgliedsunternehmen ab sofort aus Ihrem Büro in Hamburg betreuen. Mit ihrer Ausbildung zur staatlich geprüften Textildesignerin und ihrer anschließenden Karriere als CSR- und Nachhaltigkeitsmanagerin, ebenfalls in der Textilbranche, bringt sie die besten Voraussetzungen mit, um die Mitgliedsunternehmen bei der Findung von Lösungen bei den anstehenden vielen Herausforderungen zu unterstützen. Sabine Paulsen dazu „Ich freue mich auf die spannenden und herausfordernden Themen in einer interessanten Branche und einem Netzwerk mit hohen Ansprüchen und der klaren Ausrichtung auf eine notwendige nachhaltige Entwicklung. Und natürlich freue ich mich darauf baldmöglichst viele Mitglieder und Ihre Unternehmen kennenzulernen, um die Vision von MaxTex gemeinsam voranzutreiben.“

Vorstandsvorsitzender Felix Blumenauer zum vollzogenen Wechsel: „Wir haben uns in einem fairen Auswahlverfahren für Sabine Paulsen entschieden, weil sie die perfekten Voraussetzungen in fachlicher wie auch in persönlicher Hinsicht mitbringt. Mit Ihr ist ein reibungsloser Übergang und vor allem eine kontinuierliche Weiterentwicklung von MaxTex gewährleistet. Wir freuen uns sehr auf die Zusammenarbeit“!

More information:
MaxTex Geschäftsführung
Source:

Vereinigung MaxTex

(c) nova Institut
21.01.2025

Six Innovations nominated for Cellulose Fibre Innovation of the Year 2025

It is getting exciting again in Cologne on 12 and 13 March for the cellulose fibres industry. Six new products have been nominated for the popular innovation award.

Every year, the conference organisator nova-Institute together with award sponsor GIG Karasek honours companies that impress with their creativity, technological progress and ecological impact. The aim of the award is not only to recognise the winners’ innovative products, but also to set an example for the courage to innovate.

The nominees’ presentations, the voting and the winner ceremony will take place on 12 March at the Cellulose Fibres Conference 2025. Participants of the conference can vote live for the three winners. More than 220 people are expected to attend.

The Nominees

It is getting exciting again in Cologne on 12 and 13 March for the cellulose fibres industry. Six new products have been nominated for the popular innovation award.

Every year, the conference organisator nova-Institute together with award sponsor GIG Karasek honours companies that impress with their creativity, technological progress and ecological impact. The aim of the award is not only to recognise the winners’ innovative products, but also to set an example for the courage to innovate.

The nominees’ presentations, the voting and the winner ceremony will take place on 12 March at the Cellulose Fibres Conference 2025. Participants of the conference can vote live for the three winners. More than 220 people are expected to attend.

The Nominees

Fibers365 (DE): Hemp365 – Agricultural Decorative and Carrier Material
The solution “hemp365” is characterised by the development of a cost-effective, plant-based decorative and carrier material through the chemical-free processing of a regional agricultural fibre and the use of resulting short fibres in a wet-laid process, allowing for a massive reduction in the amount of fossil based binders required for strength and functionality. The non fibre content is less than 7 % and is also made from biogenic and biodegradable material. Hemp365 is 100% natural and vegan. It has been designed for consumer (fashion) and industrial applications in cooperation with an automotive OEM.

Releaf Paper France (FR): Releaf Fiber – Eco-Friendly Paper from Urban Fallen Leaves
Releaf Paper France transforms urban fallen leaves into sustainable cellulose fibres, offering an eco-friendly alternative to traditional hardwood pulp. Using proprietary low-temperature extraction, high-quality fibres with excellent paper-forming properties are isolated. With a cellulose content of 32-48 % and properties similar to hardwood, RELEAF fibres are ideal for packaging materials like corrugated paper, boxes, and bags. This innovative process, which requires minimal water and non-aggressive solvents, aligns with circular economy principles, repurposing millions of tons of urban leaf waste annually and supporting global brands in achieving sustainable packaging solutions.

SA-Dynamics (DE): Cellulose Aerogel Textiles – Next-Generation Insulation Materials
Cellulose Aerogel Textiles are revolutionary insulation materials made from 100 % biodegradable cellulose aerogel fibres. These combine the flexibility and ease of processing of traditional fabrics with the superior thermal insulation properties of aerogels by utilising a novel aerogel fibre process. Lightweight, highly efficient, and compatible with conventional textile machinery, they provide a sustainable alternative to fossil-based and animal-derived insulation materials. Fully recyclable and free from microplastic emissions, Cellulose Aerogel Textiles set a new benchmark for circular economy solutions in the textile and construction industries. Initial functional demonstrators were developed through two projects, funded by Biotexfuture and RWTH Innovation, respectively.

Sci-Lume Labs (US): Bylon® – Renewable Circular Fibres from Agricultural Waste
Sci-Lume Labs makes Bylon®, a scalable, circular, biosynthetic fibre. Using highly efficient chemistries to valorise agricultural waste, Bylon® seamlessly integrates into every step of the global value chain – from raw material production through textile manufacturing. Bylon® is distinct from incumbent and next-gen materials because it is simultaneously bio-based; waste-derived; degradable; recyclable; downstream-compatible; and melt-spinnable. Bylon® also offers a unique performance profile by combining the mechanical properties and tunability of traditional synthetics with the moisture properties and circularity of natural fibres. By not requiring changes to the supply chain, Bylon® empowers the industry to reduce its environmental impact – without compromising on quality, performance, or cost.

TMG Automotive (PT): REFIBER – Sustainable Automotive Surface Material
Textile-based composite solutions are a growing trend in the automotive sector, especially for decorative and functional interior applications. Innovative plant-based leather demonstrates this trend, combining sustainability with advanced performance. Developed from a biopolymer matrix combined with cellulose waste, this material transforms waste into a premium, eco-friendly solution. Its textile backing and non-woven laminate backing are also made entirely from cellulose fibres, creating a fully integrated bio-based composite. Designed for car interiors and more, this lightweight, durable and aesthetically versatile material sets a new standard for sustainable design, while satisfying the industry’s growing demand for circular and renewable alternatives.

Uluu (AU): Replacing plastic in textiles with natural, seaweed-derived materials
Uluu is an Australian start-up set to replace plastics with natural polymers called PHAs. Uluu materials are made from a regenerative feedstock: farmed seaweed, thus ending reliance on fossil fuels and land crops. Uluu, in partnership with Deakin University, is developing textiles that perform like synthetic polyester but are truly biodegradable and biocompatible, thus eliminating persistent microplastic pollution in fashion. Importantly, Uluu materials are reusable, recyclable, and most importantly, compostable. They are naturally produced through a unique fermentation process that uses seaweed, saltwater microbes and seawater. Uluu pellets can be directly substituted for plastic (e.g., polyester, nylon) in existing melt spinning equipment, creating yarns that can be knitted or woven into textiles. In addition to fibre-grade pellets, Uluu is also producing other grades of pellets to replace plastics used in e.g., buttons, sunglasses, hair clips and packaging.

21.01.2025

adidas: Successful 2024 with better-than-expected 4Q

adidas announced preliminary results for the fourth quarter of 2024. In Q4, currency-neutral revenues increased 19%. In euro terms, the company’s revenues grew 24% to € 5,965 million (2023: € 4,812 million). Excluding Yeezy sales in both years, currency-neutral revenues increased 18%. The company’s gross margin increased 5.2 percentage points to 49.8% (2023: 44.6%). Operating profit reached € 57 million in the quarter (2023: operating loss of € 377 million).

Based on preliminary unaudited numbers for the full year of 2024, the company’s currency-neutral revenues were up 12%. In euro terms, revenues increased 11% versus the prior year and reached € 23,683 million in 2024 (2023: € 21,427 million). Excluding Yeezy sales in both years, currency-neutral revenues increased 13%. The company’s gross margin improved by 3.3 percentage points to 50.8% in 2024 (2023: 47.5%), while full-year operating profit increased by more than € 1 billion to € 1,337 million (2023: € 268 million).

adidas announced preliminary results for the fourth quarter of 2024. In Q4, currency-neutral revenues increased 19%. In euro terms, the company’s revenues grew 24% to € 5,965 million (2023: € 4,812 million). Excluding Yeezy sales in both years, currency-neutral revenues increased 18%. The company’s gross margin increased 5.2 percentage points to 49.8% (2023: 44.6%). Operating profit reached € 57 million in the quarter (2023: operating loss of € 377 million).

Based on preliminary unaudited numbers for the full year of 2024, the company’s currency-neutral revenues were up 12%. In euro terms, revenues increased 11% versus the prior year and reached € 23,683 million in 2024 (2023: € 21,427 million). Excluding Yeezy sales in both years, currency-neutral revenues increased 13%. The company’s gross margin improved by 3.3 percentage points to 50.8% in 2024 (2023: 47.5%), while full-year operating profit increased by more than € 1 billion to € 1,337 million (2023: € 268 million).

adidas CEO Bjørn Gulden:
“I am very pleased the way the fourth quarter and the full year developed for us at adidas. 19% currency-neutral growth (+24% reported) in a quarter that in general was difficult for the trade underlines the strong momentum we currently see for our brand and our products. We clearly see that consumers’ and retailers’ interest in our products is growing across both Lifestyle and Performance. Strong growth across all regions and divisions proves the good job our teams are doing across regions and functions.

We grew double-digit in 2024 (+12% currency-neutral) and improved our operating profit for the year by more than € 1 billion to € 1.337 billion. So although we are not yet where we want to be long term, I am very happy with this development which was much better than we had expected. We still have a lot to improve but I am very proud of what our teams and people have achieved in 2024.

We also feel good about the future, and we see potential to increase our market share in all markets. There is a lot of macroeconomic uncertainty right now, but we clearly have the goal to again grow double-digit with the adidas brand and use that growth to continue to improve our operating profit and make further progress towards our 10% margin target.”

More information:
adidas AG quarter
Source:

adidas AG

21.01.2025

45 Years Trevira CS®

Indorama Ventures exhibited the Trevira CS® brand together with 17 Trevira CS partner companies at the Heimtextil trade fair in Frankfurt, Germany, from January 14-17, 2025.

This year Trevira CS is celebrating its 45th anniversary! In 1980 Trevira CS® was launched on the market, at that time a pioneer for permanently flame retardant textiles whose flame retardant properties neither wash out nor are lost through ageing or use. They are characterized by the fact that they meet all essential fire protection standards without the need for a chemical finish. Fabrics made from specially produced flame-retardant polyester can be labeled as Trevira CS after passing a brand test. Samples, brochures, pictures and short anecdotes from 45 years of Trevira CS will be on display in a special area of the exhibition stand, inviting visitors to browse and smile.

Indorama Ventures exhibited the Trevira CS® brand together with 17 Trevira CS partner companies at the Heimtextil trade fair in Frankfurt, Germany, from January 14-17, 2025.

This year Trevira CS is celebrating its 45th anniversary! In 1980 Trevira CS® was launched on the market, at that time a pioneer for permanently flame retardant textiles whose flame retardant properties neither wash out nor are lost through ageing or use. They are characterized by the fact that they meet all essential fire protection standards without the need for a chemical finish. Fabrics made from specially produced flame-retardant polyester can be labeled as Trevira CS after passing a brand test. Samples, brochures, pictures and short anecdotes from 45 years of Trevira CS will be on display in a special area of the exhibition stand, inviting visitors to browse and smile.

In the anniversary year the focus of the Trevira CS® joint stand will be on permanent flame retardancy and the sustainability approaches of Trevira CS fabrics, which are known for their outstanding properties and versatility in the textile industry. Not only will the latest yarn and fabric developments from the 17 partners be presented, the three sustainability approaches from 1. pre-consumer recycling, 2. the Trevira CS take-back concept in cooperation with the company ALTEX Textil-Recycling GmbH & Co. KG in Gronau, Germany and 3. developments from chemically recycled raw material, but also all submissions to the Trevira CS Fabric Competition 2025. This encouraged Trevira CS participants to explore the interfaces between permanent flame retardancy, textile design, functionality and safety and to submit articles for five different categories.

The BREATHAIR® brand, a 3D upholstery material, was also be presented at the trade fair. This innovative and recyclable product has been specially developed for the upholstery industry and offers new possibilities for sustainable and comfortable furniture designs. Thanks to the nature of BREATHAIR®, it can be recycled at the end of its life cycle . Visitors to the trade fair will have the opportunity to experience the unique comfort of BREATHAIR® up close in a seating lab.

The Deja™ brand is an integral part of Indorama Ventures' commitment to long-term sustainability through recycling and bio-based materials. The product portfolio includes chips, as well as various staple fibers and filament yarns in multiple titer and yarn specifications.

In cooperation with Auping and TWE, Indorama Ventures and Deja™ developed an innovative mattress consisting of two basic components. This new design allows for easier disassembly and therefore more efficient recycling. The partnership aims to promote the circular economy and reduce the environmental impact of mattresses. By using recyclable materials and reducing waste, the companies are actively contributing to a more sustainable future.

Source:

Indorama Ventures Public Company Limited