From the Sector

Wie wird Nachhaltigkeit in der Textilbranche konkret messbar und gleichzeitig zu einem echten Mehrwert für Unternehmen? CWS Workwear, ein führender Anbieter von Arbeitskleidung im Servicemodell, gibt Antworten. Das Unternehmen aus Dreieich versorgt seit über 125 Jahren Millionen von Menschen mit Arbeitskleidung – von Handwerksbetrieben bis zur Gastronomie. Der Responsibility Report 2024/25 von CWS Workwear zeigt, dass moderne ESG-Strategien längst mehr als nur Umweltschutz sind und Kunden konkrete Wettbewerbsvorteile bieten:

• CO2-Rechner macht Einsparungen transparent: Mit dem kostenlosen, datengesteuerten Ansatz können Kunden ihre individuellen CO2-Einsparungsmöglichkeiten im Textilbereich nachvollziehen. Ein Beispiel für das Potenzial: Durch optimierte Waschstraßen spart das Unternehmen jährlich 42.900 m³ Wasser, 244.400 kWh Strom und über 41 Tonnen CO2 – Einsparungen, die direkt der Kundenbilanz zugutekommen. 
• Innovation Lab verdoppelt Produktlebensdauer: Das Forschungszentrum in Dreieich arbeitet mit Textilforensik und Qualitätsanalysen daran, die Lebensdauer von Arbeitskleidung bis 2030 zu verdoppeln – weniger Verschleiß bedeutet für Kunden geringere Kosten und bessere Nachhaltigkeit. 
• Kreislaufwirtschaft mit messbaren Erfolgen: Mit einer Recyclingquote von 66 Prozent setzt CWS Workwear auf Wiederverwertung und nachhaltige Rohstoffe. Die Kombination aus Cotton made in Africa® und recycelten PET-Flaschen sorgt für strapazierfähige Textilien, die sowohl ökologischen als auch qualitativen Ansprüchen gerecht werden. 

"ESG ist bei uns kein Add-on, sondern integraler Bestandteil aller Geschäftsentscheidungen", betont Leonie Biesen, Sustainability Lead bei CWS Workwear. Der Report macht diese Transformation anhand konkreter Zahlen und Kundenvorteile nachvollziehbar. 

EURATEX and its Danish member Dansk Mode & Textil are calling upon the Danish Presidency of the EU to bring back stability and transparency to the European agenda. These last few months major upheavals and turbulence in global markets have been seen, as well as uncertainty surrounding a number of regulatory initiatives. All this creates a climate of uncertainty for European industry and anxiety with the consumers. As a result, demand for textile and garments is low, and entrepreneurs are hesitant to make any further investment decisions.

The Danish Presidency should do its utmost to restore confidence in the EU, by setting clear timelines and a regulatory pathway, which will allow our companies to make their investment and business plans for the next 5 years. 

Specifically, the associations encourage the Presidency to move forward on some specific dossiers:

• Ensure that the Circular Economy Act will support the demand for sustainable textile products and create a single market for textile waste (en-of-waste criteria);
• Accelerate the much needed reform of the Union Customs Code, and adopt specific measures much faster (e.g. on the de minimis threshold) and much bolder (e.g. going beyond the €2 handling fee for on line parcels);
• Move forward on implementing the Waste Framework Directive, allowing EPR schemes to be rolled out across the EU in a harmonised way. 
• Clarify the future of the Green Claims initiative, which is an important initiative to avoid greenwashing in the fashion industry. 
• Put the ratification of the Mercosur FTA back on track as quickly as possible, as European textile companies stand to gain from that agreement
• By contrast, carefully monitor the negotiations with India, to ensure a comprehensive and balanced agreement can be reached (as against a quick and partial deal).
• Quickly move forward with the Energy Union, which should result in much needed lower energy prices for our European manufacturers.
• Ensure a more efficient and coherent regulatory chemicals framework through a REACH revision, which increases transparency and predictability, and retains companies from relocating outside of the EU.

Thomas Klausen from DM&T commented as follows: “In these uncertain times we need the EU as a stabilising factor, and this also goes for the Danish fashion and textile industry. It is crucial that EU creates a level playing field and ensures the predictability, the industry needs to make the necessary investments. We hope that the Danish Presidency will be a key driver in ensuring this.” 

Dirk Vantyghem from EURATEX added: “Our textile companies face too many uncertainties. While the EU cannot solve them alone, we expect from the Danish Presidency to show some leadership and move forward on these many urgent topics. We have no time to loose if we want to safeguard the competitiveness of our industry.”

The Danish textile and clothing industry contributes 87 billion Danish kroner annually to Denmark's total GDP and helps create 96,000 jobs in Denmark.

The industry accounts for six per cent of total Danish goods exports and thus plays a central role in Danish the economy as a whole.

From 25 to 26 June 2025, the final meeting of the ERASMUS+ project AddTex took place in Terrassa, Spain, which aimed to train workers, pupils and students in the textile industry. Over a period of three years, eleven partners from Greece, Ireland, Italy, Portugal, Romania, Sweden, Slovenia, Spain, the Czech Republic and the IVGT association for Germany were involved in the project.

With hackathons, virtual internships and 45 freely accessible MOOCs, AddTex set new standards in training and further education in the textile industry. The online platform www.addtex.eu provides professionals with the latest insights into green, digital and smart textiles – in a practical and free format. 

AddTex.eu online platform
All the project goals were achieved. The partners developed innovative formats such as summer schools, back-to-school programmes, coaching services and masterclasses. The 45 massive open online courses (MOOCs) on the AddTex.eu platform offer explanatory videos and learning materials as downloadable PDFs, each tailored to the three main target groups: technicians, engineers and managers.

A highlight of the closing event on 26 June 2025, which was jointly organised by AddTex and the EU project xBUILD-EU under the motto ‘Textile Talent & Innovation: Driving Tomorrow's Industry’, was the interactive session ‘New Generations in the Labour Market’, including the speed dating event ‘Talent meets Industry’. The event brought together companies, students and experts for an intensive exchange and networking day in Terrassa.

The AddTex.eu platform will be continuously developed over the next five years by the IVGT Technical Textiles Department together with the project partners in order to provide up-to-date content and act as a point of contact for industry and universities. In addition to instructions for creating your own MOOCs, hackathons and webinars, new soft skills and formats such as back-to-school programmes and solution-oriented consulting have been developed and implemented by project hubs.

A collaboration with the Chair of Textile Technology at Chemnitz University of Technology and the Texoversum Experts & Training Hub in Reutlingen is currently planned to supplement the project results. In addition to the three EU priority areas of ‘Green – Digital – Smart’, the focus is also on textile recycling and digitisation and AI topics in order to provide IVGT members with targeted information, training materials and network contacts.

The IVGT was most recently responsible for work package 5, ‘Qualification of the textile industry through ADDTEX hubs for green-digital-smart,’ as well as for the creation of an application manual and a business plan to ensure that the project content is updated for at least five years after the end of the project.

In einer aktuellen wissenschaftlichen Studie, veröffentlicht im Fachjournal Frontiers in Sports and Active Living, präsentiert ein Forschungsteam von Salzburg Research gemeinsam mit der Adidas AG neue Erkenntnisse zur Leistungsentwicklung im Mädchenfußball. Das Besondere: Die Analyse kombiniert erstmals hochauflösende Sensordaten mit subjektiven Selbsteinschätzungen der Spielerinnen.

Technologie trifft Trainingspraxis: Datenerhebung mit smarten Einlagen
Im Zentrum der Studie stehen 46 Spielerinnen des 1. FC Nürnberg der Altersklassen U17 und U20, die über einen Zeitraum von 14 Monaten mit intelligenten Einlegesohlen ausgestattet wurden. Die Sensoren in der Sohle – sogenannte inertiale Messeinheiten (IMUs) – erfassten präzise Bewegungsdaten während regulärer Trainingseinheiten. Direkt nach dem Training gaben die Spielerinnen Einschätzungen zur wahrgenommenen Trainingsintensität und ihrem emotionalen Empfinden ab.

„Unser Ziel war es, objektive Leistungsmetriken wie Ballgeschwindigkeit, Spitzengeschwindigkeit und zurückgelegte Distanz mit subjektiven Bewertungen zu verknüpfen“, erklärt Studienautor Stefan Kranzinger von Salzburg Research.

Ergebnisse: Emotionen und Leistung hängen zusammen
Die Studie ergab, dass es bei etwa der Hälfte der Spielerinnen signifikante Leistungstrends über die Zeit gab – sowohl positive als auch negative. Am häufigsten zeigten sich Veränderungen in der Spitzengeschwindigkeit. Überraschend: Die subjektiv empfundene Trainingsintensität korrelierte in mehreren Fällen negativ mit der tatsächlichen Ballgeschwindigkeit, insbesondere bei Torhüterinnen und Verteidigerinnen. Heißt: Spielerinnen, die ihr Training als besonders anstrengend empfanden, erzielten niedrigere Ballgeschwindigkeiten. Umgekehrt zeigten sich positive Zusammenhänge zwischen Intensität und Laufleistung: Je intensiver das Training wahrgenommen wurde, desto mehr Strecke wurde oft zurückgelegt – insbesondere bei Abwehrspielerinnen.

Auch das emotionale Empfinden hatte einen messbaren Einfluss: Spielerinnen, die sich „glücklicher“ nach der Einheit fühlten, zeigten tendenziell bessere technische Leistungen – etwa bei der Ballgeschwindigkeit der Mittelfeldspielerinnen.

Potenzial für personalisiertes Training
„Die Ergebnisse zeigen eindrucksvoll, dass sich technologische und psychologische Perspektiven ideal ergänzen können“, betont Christina Kranzinger, Co-Autorin der Studie. Die Kombination aus Wearable-Daten und subjektiven Einschätzungen eröffnet neue Möglichkeiten für individualisierte Trainingssteuerung, Belastungsmanagement und Verletzungsprävention.

Breites Anwendungsspektrum über den Fußball hinaus
Obwohl sich die Studie auf weibliche Jugendspielerinnen konzentriert, lässt sich die Methodik laut den Autor:innen auch auf andere Sportarten übertragen – etwa im Handball, Basketball oder im Leistungssport allgemein.

Die Publikation entstand im Rahmen des Forschungsprojekts „DiMo-NEXT – Next Level of Digital Motion in Sports, Fitness and Well-being“, gefördert im Rahmen des Programms „COMET - Competence Centers for Excellent Technologies“ durch das österreichische Bundesministerium für Innovation, Mobilität und Infrastruktur (BMIMI), das österreichische Bundesministerium für Wirtschaft, Energie und Tourismus (BMWET), der österreichischen Forschungsförderungsgesellschaft (FFG) sowie durch die Bundesländer Salzburg, Tirol und Oberösterreich.

On July 8, 2025, Mayer & Cie will celebrate its 120th anniversary. The company, now in its fourth generation of family ownership, specializes in the production and sales of circular knitting and braiding machines. Almost all its products are exported, and the green MCT logo on the machines is recognized by knitters around the world as a symbol of precision, durability, and reliability.

Time and again, Mayer & Cie.’s inventive developers have delivered key technical milestones. Today, digital solutions are increasingly important: a circular knitting machine is expected not only to deliver production data to the cloud but also to be remotely maintained. In the field of braiding machines, Mayer & Cie. now offers 48-carrier models, enabling the production of even larger hose diameters.

“We are truly proud to be celebrating this anniversary,” says Benjamin Mayer, Managing Partner of Mayer & Cie. “120 years of a family business is far from a given: statistics show that only about 12 percent of family-owned companies make it past three generations – and we are already in our fourth,” he adds with a smile. “This proves that we’ve consistently understood market demands and met them with technological innovation.” Mayer & Cie. has frequently set industry standards, such as the introduction of electronic pattern control or the pioneering Relanit technology.

Challenging times for textile machinery manufacturing 
Despite the joy of the anniversary, current global conditions cast a shadow over the festive year. The order situation in Germany’s textile machinery industry remains difficult, and a turnaround is not yet in sight. “We’ve lived through many crises since 1905,” says Mayer. “But the one we’re facing today is by far the most challenging.”

As a result, the company expects significantly lower volumes through 2026 than at full capacity. It has cut running costs significantly, and the workforce has agreed to forego bonuses. Providing a reliable outlook remains difficult: “As a company, we are well positioned, with answers to market needs and modern production processes. This has also been confirmed by third parties. But how the global economy will develop is impossible to predict.”

Latest milestone: connecting circular knitting machines to the internet
A major recent development is a new machine control system that makes Mayer & Cie.’s circular knitting machines “IoT-ready.” This means they are technically equipped to connect with and be integrated into the Internet of Things. The new control system allows Mayer & Cie. customers around the world to access knitlink, a digital platform offering various apps for circular knitting machines.

A new visual monitoring tool has also been introduced – a practical solution, given that errors in fabric can quickly become costly: a circular knitting machine produces around 2.5 meters of fabric per minute.

Another focus lies on upgrade kits. These allow customers to keep their machine park up to date without having to invest in entirely new machines. “This supports machine longevity and sustainability,” explains Benjamin Mayer. “It also increases investment security for our customers.”

Braiding machine with 48 carriers
Just before Christmas 2024, Mayer & Cie. delivered its first braiding machine equipped with 48 carriers (bobbin holders). The second model with this configuration is currently under development. Customers benefit from a larger inner hose diameter, reduced setup times, and the same high bobbin capacity – whether processing yarn or wire.

Mayer & Cie. braiding machines are used to manufacture reinforcement braids, such as those found in high-pressure hoses used in industries like manufacturing and mining.

Since 2019, braiding machine production has been located at the company’s headquarters in Albstadt. One reason for relocating production – which had been handled by a U.S. subsidiary between 1977 and 2019 – was to improve research and development. “That strategy has paid off,” says Benjamin Mayer. “Our innovations now offer our customers greater productivity.”

Technological milestones
Innovation and technical advancement have long defined Mayer & Cie. Historically, milestones were purely mechanical: in 1938, the company launched its first proprietary circular knitting machine, based on its own patents. Prior to that, it had focused on manufacturing warp knitting machines, known as round frames. But as circular knitting machines proved faster and more efficient, production of warp knitting machines ceased entirely in 1958.

In the mid-1960s, Mayer & Cie. released a machine that became known as “every knitter’s favorite”: the OVJA 36, with innovative pattern control and suitable for especially fine fabrics. Customers were willing to wait up to three years for delivery, and order confirmations became objects of speculation. With around 7,000 units sold, it made the company world-famous in the industry.

In the late 1980s, Mayer & Cie.’s Relanit series continued this success story. With a new knitting technique, these machines delivered excellent fabric quality even when using substandard yarn.

Another technological revolution was the introduction of electronic pattern control, presented by Mayer & Cie. at a leading industry trade show in the 1970s. What used to take a full day of manual work could now be done with the press of a button.

Four generations of Mayer family leadership
The Mayer & Cie. story is also the story of the people who have led the company. Johannes Mayer, co-founder of the United Mechanical Workshops Mayer & Cie., was a hands-on tinkerer with a passion for detail. He played a major role in developing the company’s first circular knitting machines starting in 1935. When he passed away in 1958, he was remembered as the "first servant of his work."

His son, Emil Mayer, joined the company as an apprentice in 1921. As an engineer, he later drove the development of proprietary circular knitting machines and built up the company’s international business after World War II. He was posthumously named an honorary citizen of Tailfingen for founding a textile school.

Emil’s son, Peter Mayer, joined the company in 1961 and took over leadership in 1971 alongside his brother Rainer. He further expanded internationalization, was an early advocate of electronics, and shaped the market with the Relanit machine starting in 1987. He retired in 2003.

Rainer Mayer joined Mayer & Cie. in 1972 and co-managed the company from 1973. He focused on diversification, expanded business with IBM, and successfully led the company through insolvency in 2009.

Since Rainer Mayer’s passing in 2015, the fourth generation has taken the helm. Benjamin, Marcus, and Sebastian Mayer now share responsibility for the company’s various business areas.