From the Sector

Reset
673 results
soil quality, cotton farming (c) Bremer Baumwollbörse mit Firefly
04.12.2024

Traditional composting methods fora more productive, climate-friendly cotton farming

In cotton cultivation, soil quality and the associated fertility and health of the soil play a key role. For this reason, the International Cotton Advisory Committee (ICAC) in Washington has carried out an ambitious research project on this topic in collaboration with various international partner organisations – with promising results.

In cotton cultivation, soil quality and the associated fertility and health of the soil play a key role. For this reason, the International Cotton Advisory Committee (ICAC) in Washington has carried out an ambitious research project on this topic in collaboration with various international partner organisations – with promising results.

New and old methods
Soil health has long been the focus of agriculture and therefore also of cotton cultivation. The International Cotton Advisory Committee has repeatedly emphasised the importance of soil health for cotton farming in the past. The focus was particularly on the situation in developing countries, where yields are still low compared to those in developed countries. An ICAC team has now developed a special programme to improve soil health, based on studies by international research teams and practical experience. The aim is to help cotton producers to achieve better, higher quality crop yields in healthy soil and, at the same time, contribute to climate protection with traditional, sustainable agricultural methods for soil cultivation that have been used for years. Valuable biomaterials are produced using various composting and fermentation methods.

The building blocks of soil improvement
Biochar, bokashi and jeevamrit are important components of proven methods for soil improvement. All three are seen as beneficial products for promoting sustainable agricultural practices. They are inexpensive to produce and, when combined and mixed, they offer effective solutions for restoring degraded, i.e. quality-reduced soils of varying consistency. This is a constant challenge, especially in African regions.

Biochar
Following the recommendations of the ICAC, biochar is produced using the ‘Cone Pit Open-Earth Kiln’ technique. This involves burning the cotton stalks left over from the harvest.
The production of biochar is rooted in history: evidence shows that indigenous peoples in the Amazon used a form called ‘terra preta’ to enrich the soil over 1,000 years ago. In modern-day agriculture, the use of biochar has been rapidly gaining momentum over the last ten years. Africa in particular has seen a significant increase. The ICAC team discovered that biochar is particularly useful for improving acidic soils due to its high pH value (8.0 to 11.0). However, in neutral and alkaline soils, biochar can increase the pH of the soil, potentially leading to lower yields. To counteract this, the ICAC team recommends mixing biochar with bokashi compost.

Bokashi
Bokashi is a type of compost originating from Japan that is traditionally produced through a fermentation process using kitchen waste, agricultural residues and effective microorganisms. Bokashi has a highly acidic pH value of 3.5, which makes it an ideal material for balancing the alkalinity of biochar. According to the ICAC, combining biochar with bokashi compost in the right ratios can result in a balanced soil pH of around 6.5, which is ideal for most plants. This method not only neutralises the pH value of the biochar, but also provides essential nutrients for soil organisms and plants.

Jeevamrit
To further improve soil quality where necessary, the ICAC team introduced jeevamrit. Jeevamrit is a traditional Indian method that provides soils with a variety of microorganisms. The production of jeevamrit, which involves processing cow dung and sugarcane molasses, provides a rich source of beneficial microbes that improve nutrient availability and promote soil regeneration.

When biochar, bokashi and jeevamrit are combined, they form the basis for regenerative agriculture. Studies show that biochar improves soil structure, bokashi provides nutrients and jeevamrit promotes microbial diversity, leading to healthier soils, increased productivity and sustainability in agriculture.

Training initiatives promote knowledge
Over the past three years, training courses on regenerative agriculture have been held in Africa, India and Bangladesh. A total of 16 organisations were involved. The training focused on three main technologies: bokashi composting, the ICAC practices for biochar production and jeevamrit for inoculating soils with a variety of soil microbes. The programmes have made the production techniques accessible to smallholder farmers in particular, leading to widespread adoption and improved soil quality.

Source:

Bremer Baumwollbörse

Fine craftsmanship Photo Vivolo
03.12.2024

OEKO-TEX® LEATHER STANDARD for Vivolo

One piece at a time - work with precision, grow with wisdom: Luciano Vivolo unveils the strategy that has enabled his company to navigate these challenging years for the world of luxury and, particularly, leather: technological investments, diversification of supply and markets, sustainable innovation, and hope for the future, without ever conceding on quality.

In a demanding and competitive field such as haute couture, achieving nearly fifty years of success does not happen by chance. It requires consistently staying one step ahead, designing the future in its most elegant details while safeguarding the identity and uniqueness that form the foundation of a company’s heritage. What distinguishes Vivolo, for example, is its refined and original designs, the ability to develop prototypes in just 24 hours, and the capacity to produce over 8 million articles a year, all adhering to the company’s high-quality standards.

One piece at a time - work with precision, grow with wisdom: Luciano Vivolo unveils the strategy that has enabled his company to navigate these challenging years for the world of luxury and, particularly, leather: technological investments, diversification of supply and markets, sustainable innovation, and hope for the future, without ever conceding on quality.

In a demanding and competitive field such as haute couture, achieving nearly fifty years of success does not happen by chance. It requires consistently staying one step ahead, designing the future in its most elegant details while safeguarding the identity and uniqueness that form the foundation of a company’s heritage. What distinguishes Vivolo, for example, is its refined and original designs, the ability to develop prototypes in just 24 hours, and the capacity to produce over 8 million articles a year, all adhering to the company’s high-quality standards.

These founding values of Vivolo are rooted in the prestigious manufacturing tradition of Made in Italy. However, as founder and president Luciano Vivolo explains, while these values remain essential, they are no longer sufficient to guarantee success for Italian companies. "In recent years, we have faced all sorts of variables, unpredictable or, worse, unforeseen. The belief of luxury, like many cornerstones of our society and industry, is no longer as firmly established as it once was. The sector is experiencing a crisis with deeper roots than many might imagine. At Vivolo, we are tackling this situation as we always have, by working patiently, designing, cutting, sewing, and creating one piece at a time, but always looking towards the horizon to recognize new opportunities and needs."

In 2024, just one year after inaugurating its efficient and modern headquarters in Bologna (San Lazzaro), Vivolo announced the expansion of its production department. This 1,000 square-meter addition of machines, dedicated to footwear and leather goods, complements the company’s existing 10,000 square-meter production facility. The strategic decision to invest more than one million euros in these segments materialized not only in the purchase of advanced machinery but also in the hiring of highly qualified personnel and structural improvements that enabled the company to increase production volumes.

In addition to this vertical growth, Vivolo has also pursued horizontal expansion by strengthening its network of sales agents in Northern Europe, particularly Germany, Holland, and Scandinavia, and the Far East, focusing on South Korea and Japan. These regions, especially important for Vivolo’s denim sector, value the company’s iconic leather labels, which are hot-printed, high-frequency (HF) or digitally produced, making each garment unique. Vivolo’s innovative capabilities are further enhanced by a state-of-the-art 3D machine, which eliminates the need for die-casting facilities, significantly optimizing costs, time, and resources. A prototype can now be produced in just a few hours.

However, the range of Vivolo’s accessories extends far beyond this. Each season brings dozens of new themes that explore sustainable materials, innovative processes, original designs, and unique techniques to anticipate fashion trends and offer unexpected, inimitable solutions to luxury brands. At the heart of Vivolo's business is environmental ethics, a vision that embraces the product in all its dimensions while integrating both working and human processes and relationships.

"As rhetorical as it may sound, our corporate culture is built on the idea of leaving a better world, or the best possible world, for future generations. For me, this need is closely and pragmatically tied to my four children. From the first patches I created to mend my son Salvatore’s trousers in the 1970s to the investments in our new headquarters and the recent production expansion, every decision has been driven by the desire to build a better future for the Vivolo family and company, and for generations to come," adds Luciano Vivolo.

Looking ahead, the company, which prides itself on maintaining up-to-date certifications, including the recently added OEKO-TEX® LEATHER STANDARD, and transparent communication, is currently in the preparatory stage of drafting its first sustainability report. This milestone will provide an opportunity to reflect on objectives achieved and set goals for the future. "The Sustainability Report 2025 is a goal we have set for ourselves as a concrete demonstration of our commitment to creating and sharing value for all stakeholders," says Luciano Vivolo. "We expect 2024 to close on a positive note for our company, even though it is difficult to define precise figures at this time. Certainly, our goal for 2025 is to raise our standards even higher while hoping for a recovery in the luxury market, to which we have been connected for decades."

Source:

Vivolo

Dark green shirt in 2024 for sustainable Naia™ fibers Graphic by Eastman Chemical Company
Dark green shirt in 2024 for sustainable Naia™ fibers
03.12.2024

Eastman reconfirmed dark green shirt in 2024 for sustainable Naia™ fibers

This year, Eastman and its innovative Naia™ cellulosic fibers have earned again the dark green shirt designation in the Canopy Hot Button Ranking and Report, underscoring the steadfast commitment to protecting ancient and endangered forests while driving innovation in Next Generation fiber solutions.

This year, Eastman and its innovative Naia™ cellulosic fibers have earned again the dark green shirt designation in the Canopy Hot Button Ranking and Report, underscoring the steadfast commitment to protecting ancient and endangered forests while driving innovation in Next Generation fiber solutions.

With “buttons” being used in the report as a measure of MMCF producers sustainability performance across seven critical categories, Eastman maintained a score of 30 buttons for the sustainable production of Naia™ cellulosic fibers. This recognition has been consistently reconfirmed since 2022, after Eastman’s first light green designation in 2019, reflecting their ongoing efforts to prioritize sustainable raw material sourcing, low-impact production processes, and fiber innovation that comes with a lighter impact on the planet.
The Naia™ Renew portfolio, including the Naia™ Renew ES, has also been a cornerstone of this success. Already available at scale, Naia™ Renew ES is created from a blend of 40% certified recycled waste materials, 20% certified recycled cellulose, and 40% sustainably sourced wood pulp. This innovative fiber has become a preferred choice for sustainability-driven brands like Reformation which has already launched its 2nd collection and is gaining increasing traction in retail markets worldwide.

By investing in cutting-edge technologies and industry collaboration, Eastman is redefining what is possible in sustainable fiber innovation. The company remains committed to advancing its mission of creating high-quality, eco-conscious solutions that support the well-being of the planet, industry workers, and consumers alike.

Source:

Eastman Chemical Company

Laura Beachy Vice President of Global Marketing and Communications Photo Thermore
Laura Beachy
03.12.2024

Thermore: With Laura Beachy into the end-consumer market

Thermore prepares for next phase of growth into the end-consumer market: Thermore, an Italian manufacturing firm and leader in sustainable synthetic insulation, welcomes Laura Beachy as Vice President of Global Marketing and Communications. Beachy joins Thermore from Hyla Strategies, a NYC-based boutique marketing firm, where she served as a Managing Partner since 2014. Over the past decade, she has guided a diverse portfolio ranging from Shark Tank startups to Fortune 500 companies. Beachy’s understanding of sustainability, passion for the outdoors, and proven track record of success makes her poised to amplify Thermore’s brand story and drive its mission to new heights.

In the outdoor industry, Beachy’s consumer-facing knowledge has supported iconic brands like Xero Shoes, Oiselle, HOKA, Altra, and Kinetic. Her strategies have driven measurable growth—transforming online communities into buyers.

Thermore prepares for next phase of growth into the end-consumer market: Thermore, an Italian manufacturing firm and leader in sustainable synthetic insulation, welcomes Laura Beachy as Vice President of Global Marketing and Communications. Beachy joins Thermore from Hyla Strategies, a NYC-based boutique marketing firm, where she served as a Managing Partner since 2014. Over the past decade, she has guided a diverse portfolio ranging from Shark Tank startups to Fortune 500 companies. Beachy’s understanding of sustainability, passion for the outdoors, and proven track record of success makes her poised to amplify Thermore’s brand story and drive its mission to new heights.

In the outdoor industry, Beachy’s consumer-facing knowledge has supported iconic brands like Xero Shoes, Oiselle, HOKA, Altra, and Kinetic. Her strategies have driven measurable growth—transforming online communities into buyers.

Beachy’s leadership represents a significant step for Thermore as it makes its first foray into the end-consumer market. Beachy will lead Thermore’s efforts to enhance brand presence, driving customer engagement while continuing to innovate in B2B channels. Her in-depth experience of B2C consumer engagement in the outdoor industry and specialized marketing development work in B2B climate tech, positions her as the perfect leader to guide Thermore as it expands its influence into the consumer market.

Source:

Thermore

03.12.2024

ECHA: Compliance of safety data sheets – more efforts needed

An EU-wide project of ECHA’s Enforcement Forum found that 35 % of the checked safety data sheets (SDS) were non-compliant. Compliance has improved compared to earlier enforcement projects, but more efforts are needed to further enhance the quality of information to better protect workers, professional users and the environment from risks posed by hazardous chemicals.

Inspectors in 28 EU-EEA countries checked over 2,500 safety data sheets (SDS) to enforce the new requirements introduced in 2023. The primary goal was to check whether the SDS were complete, up-to-date and included all the required information, especially the new information required. Second objective was to check the quality of the information, its consistency and compliance with the legal requirements.

Inspectors found that 35% of the inspected SDS did not comply with the legislation – either because the content did not meet the requirements or the safety data sheet was not provided at all.

An EU-wide project of ECHA’s Enforcement Forum found that 35 % of the checked safety data sheets (SDS) were non-compliant. Compliance has improved compared to earlier enforcement projects, but more efforts are needed to further enhance the quality of information to better protect workers, professional users and the environment from risks posed by hazardous chemicals.

Inspectors in 28 EU-EEA countries checked over 2,500 safety data sheets (SDS) to enforce the new requirements introduced in 2023. The primary goal was to check whether the SDS were complete, up-to-date and included all the required information, especially the new information required. Second objective was to check the quality of the information, its consistency and compliance with the legal requirements.

Inspectors found that 35% of the inspected SDS did not comply with the legislation – either because the content did not meet the requirements or the safety data sheet was not provided at all.

It was also found by inspectors that the flow of SDS in the supply chain works well – suppliers provided the SDS to the recipients when required in 96 % of the cases. Additionally, most of the 2,500 SDS were updated to the new format.

Among the new information requirements, the biggest challenge was the lack of information on nanoforms and on endocrine disrupting properties, missing respectively in 67 % and 48 % of the checked SDS where it was required. Another relevant finding was that some of the SDS (16 %) lacked the information required by the authorisation decisions.

The Forum project also reported deficiencies in data quality for 27 % of the inspected SDS. Common issues included incorrect information on hazard identification, composition or exposure control. Additionally, 18 % of the checked SDSs lacked the required exposure scenarios.

Enforcement actions
To address non-compliance, inspectors primarily issued written advice, but also used administrative orders, fines and, in some cases, filed criminal complaints.

Abdulqadir Suleiman, chair of the Enforcement Forum’s working group, said:
“In recent years, inspectors have observed improvements in the compliance of chemicals suppliers with their obligation to provide up-to-date safety data sheets. These compliance improvements could be attributed to the harmonised requirements of REACH, great efforts by the industry, continued focus by enforcement authorities, but also the dialogue between enforcement and stakeholder organisations about improving the quality of safety data sheets held some years back.

“However, there is still work to be done to enhance the quality of the information to ensure better protection of the European workers who are handling hazardous chemicals in the workplace.”

Background
SDS are used by chemical suppliers to provide their professional and industrial customers with information about the properties and risks of the chemicals and how to handle, store, use and dispose them safely. The SDS are critical to the protection of workers. They should be used by employers, or health and safety professionals of the downstream users, for carrying out chemical risk assessments in the workplace, required under the Occupational Health and Safety legislation.
This project followed an update to the safety data sheet requirements that have been in force since 2023. The SDS must now include information on nanoforms, endocrine disrupting properties, conditions of authorisation, UFI codes, acute toxicity estimates, specific concentration limits and several other parameters that help to handle chemicals safely. This change in legal requirements necessitated an update of all the SDS to include new information.

In addition to checking the data relevant to the new requirements, inspectors also checked the quality and correctness of the information included in many of the safety data sheet sections.

The inspections of this enforcement project were conducted between January and December 2023 in 28 EEA countries.

Source:

European Chemicals Agency

03.12.2024

FILTREX™ 2025: Premier Filtration Conference and Exhibition in Vienna

EDANA, the global association serving the nonwovens and related industries, announced the upcoming FILTREX™ 2025 conference and tabletop exhibition. This premier event for filtration professionals will take place on 25-26 March 2025 at the Hilton Waterfront Hotel in Vienna, Austria.

FILTREX™ Europe serves as a pivotal platform, bringing together experts, technical specialists, and industry leaders from across the filtration supply chain. The two-day conference will focus on technological and sustainability innovations, aiming to enhance media and filter performance and highlight their role in reducing emissions. Attendees can look forward to a comprehensive program featuring presentations on the latest market trends, innovative filter materials, advancements in media design, and developments in air and liquid filtration.

The event will feature two renowned keynote speakers: Dr.-Ing. Frank Möbius, Senior Innovation Advisor at UnternehmerTUM, and Former Head of Technology Management and Forecast at BMW Group, sharing insights on open innovation, and Dr. Pero Mićić, Founder and CEO of FutureManagementGroup AG, discussing strategies to future-proof businesses.

EDANA, the global association serving the nonwovens and related industries, announced the upcoming FILTREX™ 2025 conference and tabletop exhibition. This premier event for filtration professionals will take place on 25-26 March 2025 at the Hilton Waterfront Hotel in Vienna, Austria.

FILTREX™ Europe serves as a pivotal platform, bringing together experts, technical specialists, and industry leaders from across the filtration supply chain. The two-day conference will focus on technological and sustainability innovations, aiming to enhance media and filter performance and highlight their role in reducing emissions. Attendees can look forward to a comprehensive program featuring presentations on the latest market trends, innovative filter materials, advancements in media design, and developments in air and liquid filtration.

The event will feature two renowned keynote speakers: Dr.-Ing. Frank Möbius, Senior Innovation Advisor at UnternehmerTUM, and Former Head of Technology Management and Forecast at BMW Group, sharing insights on open innovation, and Dr. Pero Mićić, Founder and CEO of FutureManagementGroup AG, discussing strategies to future-proof businesses.

Additionally, key industry leaders in the filtration industry from Ahlstrom, Freudenberg, and Hollingsworth & Vose will introduce pivotal topics during the roundtable discussions. Attendees will benefit from five focused sessions covering Trends and Technologies, Standards and Testing, Media Innovation, Sustainability, and PFAS-free advancements.

In conjunction with the conference, a tabletop exhibition will showcase cutting-edge products and services, providing delegates with valuable networking opportunities. The event will also feature the 4th edition of the FILTREX™ Innovation Award, recognizing outstanding achievements in nonwoven-based filtration products. Last edition, HycuTEC (inline charging technology) by Oerlikon Nonwoven, won after receiving over one third of the votes. Companies interested in participating in the award competition are encouraged to review the eligibility criteria and submit their applications accordingly.

Registration for FILTREX™ Europe 2025 is now open. Delegates are encouraged to secure their tabletop spots promptly, as availability will be limited. For detailed information on registration fees, exhibition opportunities, and sponsorship packages, please visit the official event page.

More information:
Edana Filtrex
Source:

Edana

03.12.2024

RUDOLF will acquire Proeza in Mexico

RUDOLF announced the formal signing of a Memorandum of Understanding (MOU) to acquire Proeza in Mexico. This strategic acquisition will allow RUDOLF to leverage Proeza‘s established strengths and extensive market presence. With approx. 2,000 employees in 45 countries, RUDOLF provides logistical and technical support to its
customers worldwide.

RUDOLF is committed to maintain the exceptional level of service and quality products that Proeza’s customers have come to rely on. Rudolf is looking forward to introduc a range of innovative products from their portfolio to expand the product offering and drive innovation.

Proeza has built a strong reputation over its 40 years in the industry and Rudolf wants to build on this legacy. To ensure seamless integration and local expertise, Mr Javier Sagrero has been appointed as the new Managing Director of RUDOLF Mexico.

RUDOLF announced the formal signing of a Memorandum of Understanding (MOU) to acquire Proeza in Mexico. This strategic acquisition will allow RUDOLF to leverage Proeza‘s established strengths and extensive market presence. With approx. 2,000 employees in 45 countries, RUDOLF provides logistical and technical support to its
customers worldwide.

RUDOLF is committed to maintain the exceptional level of service and quality products that Proeza’s customers have come to rely on. Rudolf is looking forward to introduc a range of innovative products from their portfolio to expand the product offering and drive innovation.

Proeza has built a strong reputation over its 40 years in the industry and Rudolf wants to build on this legacy. To ensure seamless integration and local expertise, Mr Javier Sagrero has been appointed as the new Managing Director of RUDOLF Mexico.

More information:
Rudolf Group Mexico acquisition
Source:

Rudolf Group

Graphic Hygienix
02.12.2024

Hiro Technologies, Inc. wins 2024 Hygienix Innovation Award™

INDA brought together hundreds of industry leaders to explore advancements in the absorbent hygiene and personal care markets during the 10th annual Hygienix™ event, held Nov. 18-21 at the Renaissance Nashville Hotel.

Themed Driving Absorbent Hygiene Product Innovation: Consumer Desires, Market Dynamics & Sustainability Solutions, key sessions included pricing strategies, global trade impacts, FemTech, adult care, period poverty, emerging pet care and wound care markets, environmental regulations on plastics and PFAS, and the impact of aging societies.

An event highlight was the presentation of the 2024 Hygienix Innovation Award® to: HIRO Technologies, Inc.’s World’s First MycoDigestable Diapers, diapers featuring plastic-eating mushrooms that combine excellent absorbency with natural materials.

The other finalists were:

INDA brought together hundreds of industry leaders to explore advancements in the absorbent hygiene and personal care markets during the 10th annual Hygienix™ event, held Nov. 18-21 at the Renaissance Nashville Hotel.

Themed Driving Absorbent Hygiene Product Innovation: Consumer Desires, Market Dynamics & Sustainability Solutions, key sessions included pricing strategies, global trade impacts, FemTech, adult care, period poverty, emerging pet care and wound care markets, environmental regulations on plastics and PFAS, and the impact of aging societies.

An event highlight was the presentation of the 2024 Hygienix Innovation Award® to: HIRO Technologies, Inc.’s World’s First MycoDigestable Diapers, diapers featuring plastic-eating mushrooms that combine excellent absorbency with natural materials.

The other finalists were:

  • Harper HYGIENICS S.A.’s Cleanic Naturals Hemp Sanitary Pads (Day & Night) and Pantyliners, an innovative femcare line made with regenerative hemp fibers from Bast Fibre Technologies.
  • Hello Hazel, Inc.’s High & Dry Briefs, the first and only disposable briefs for leaks designed to look, fit, and feel like real underwear.

Hygienix Highlights
Attendees gained insights and knowledge during three hands-on training sessions on Nov. 18, focused on fundamentals of absorption systems and opportunities in adult incontinence, innovations in menstrual care, and baby and infant care market dynamics.

Hygienix kicked off with a welcome reception that fostered networking. Attendees explored emerging trends and product innovations through Lightning Talks, connected with successful hygiene start-ups during Lunch Around sessions, and discovered the latest offerings at tabletop exhibits.

“Hygienix exemplifies INDA’s commitment to empowering companies in the absorbent hygiene and personal care markets to advance their businesses,” said INDA President Tony Fragnito. “The insights and connections made at this year’s event will drive growth and enable participants to meet evolving demands and market challenges.”    

INDA announced Hygienix 2025 will be held Nov. 17-20 at Omni Amelia Island Resort, Fernandina Beach, Florida.

Source:

INDA

ReadyMac Photo EREMA Group GmbH
ReadyMac
02.12.2024

UMAC presents new plastics recycling solution even for nonwoven

UMAC, a member of the EREMA Group, is expanding its ReadyMac product line with a new 60 hertz version. This means that the immediately available plastics recycling solution can now be deployed worldwide. The standardised machine with its particularly attractive price-performance ratio will be presented in its new look for the first time at Plast Eurasia from 4-7 December 2024 in Istanbul.
    
The ReadyMac celebrated its market launch at K 2022. The recycling system, which is produced in stock and therefore available at short notice, has since established itself successfully in the 50 hertz version, particularly on the European market. Based on this success, UMAC is now also offering the ReadyMac 500 in a 60 hertz version. "The ReadyMac is suitable for a wide range of materials and degrees of contamination, processing film, flakes and regrind into high-quality recycled pellets. The fixed price of just EUR 375,000 makes it an attractive proposition," says Michael Köhnhofer, Site Manager at UMAC. The machine is produced in small series at the St. Marien site.

UMAC, a member of the EREMA Group, is expanding its ReadyMac product line with a new 60 hertz version. This means that the immediately available plastics recycling solution can now be deployed worldwide. The standardised machine with its particularly attractive price-performance ratio will be presented in its new look for the first time at Plast Eurasia from 4-7 December 2024 in Istanbul.
    
The ReadyMac celebrated its market launch at K 2022. The recycling system, which is produced in stock and therefore available at short notice, has since established itself successfully in the 50 hertz version, particularly on the European market. Based on this success, UMAC is now also offering the ReadyMac 500 in a 60 hertz version. "The ReadyMac is suitable for a wide range of materials and degrees of contamination, processing film, flakes and regrind into high-quality recycled pellets. The fixed price of just EUR 375,000 makes it an attractive proposition," says Michael Köhnhofer, Site Manager at UMAC. The machine is produced in small series at the St. Marien site.

The ReadyMac is based on EREMA's proven TVE technology, in which degassing occurs after filtration. Equipped with a robust SW RTF® screen changer filtration system, the recycling machine processes both printed and contaminated waste. The multipurpose screw handles a wide range of materials efficiently and reliably. With a throughput of up to 500 kg/h for LDPE, LLDPE, MDPE, PP, PS, PC, ABS and up to 450 kg/h for HDPE, the ReadyMac 500 is a true all-rounder. In addition, the two frequency converters on the main drives (preconditioning unit and extruder screw) ensure consistently high throughputs and quality for a wide variety of material types, such as regrind, film or nonwoven, even without changing the screw. This enhances both flexibility and productivity. The frequency converters are now included as standard with the ReadyMac.

Source:

EREMA Group GmbH

Graphic Global Fashion Agenda
28.11.2024

Global Fashion Agenda: New Blueprint for Scaling Textile Recycling in Manufacturing Countries

Global Fashion Agenda (GFA), with support from Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) and the H&M Foundation, has launched the Upstream Circularity Playbook, now available in six languages. This comprehensive resource draws on extensive case studies across multiple countries to provide a globally accessible, step-by-step guide specifically tailored for garment manufacturing regions. Designed to help stakeholders scale circular business models by valorising post-industrial textile waste, the Playbook equips manufacturing hubs with tools needed to drive sustainable change.

Global Fashion Agenda (GFA), with support from Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) and the H&M Foundation, has launched the Upstream Circularity Playbook, now available in six languages. This comprehensive resource draws on extensive case studies across multiple countries to provide a globally accessible, step-by-step guide specifically tailored for garment manufacturing regions. Designed to help stakeholders scale circular business models by valorising post-industrial textile waste, the Playbook equips manufacturing hubs with tools needed to drive sustainable change.

With over 520 global regulations now encouraging circularity and regionalisation in sourcing and design, the Playbook serves as a critical tool for establishing and scaling upstream circular ecosystems. It equips manufacturers, brands, policymakers, and investors with actionable strategies to implement circular fashion solutions in core manufacturing regions. With significant volumes of post-industrial textile waste yet to be properly harnessed, its consistency and high quality present a pivotal opportunity for scaling textile-to-textile recycling technologies in manufacturing regions. This can pave the way for recycling of post-use textiles and clothing. In Bangladesh alone, embracing textile recycling could unlock USD 4 to 5 billion annually through the export of recycled products, however, limited recycling capacity underscores a critical gap in industrial waste management.

Empowering Circularity in Manufacturing Countries
The Upstream Circularity Playbook draws on over 20 case studies from diverse regions such as Bangladesh, Cambodia, Indonesia, and Vietnam, providing an international and regional perspective that fosters knowledge sharing across the fashion industry. The examples showcase successful collaborations between brands, manufacturers, recyclers, and textile waste collectors, offering a replicable model for scaling circular solutions in various global contexts. Collaboration across the entire value chain is critical for unlocking the full potential of circularity. The Upstream Circularity Playbook provides a roadmap for stakeholders to work together in building a just and scalable circular fashion system.

A Constructive Framework for Action
The Playbook offers a pragmatic, step-by-step framework for building the necessary infrastructure to scale circularity in garment manufacturing countries. It provides essential tools for:

  • Segregating textile waste at the factory level to prevent contamination and enhance recycling quality.
  • Leveraging digital traceability platforms to track waste flows and align with recycler requirements.
  • Collecting, aggregating, and sorting textile waste to ensure it is properly prepared and delivered to recyclers.
  • Matching textile waste to the best use case by selecting the most suitable recycling technologies to ensure high-quality material recovery.
  • Designing for circularity by incorporating recycled materials into new products, contributing to the creation of a closed-loop system.

Harnessing the Opportunity
This emphasis on upstream circularity presents an immediate opportunity to valorise post-industrial waste, laying the groundwork for scaling textile-to-textile recycling and ultimately reducing dependency on virgin resources as they are gradually replaced by recycled materials. GFA previously noted in the Scaling Circularity Report that existing recycling technologies have the potential to drive up to 80% circularity in the fashion industry if fully scaled. Additionally, the Pre-Feasibility Report highlights that, in the case of Bangladesh, recycling textile waste could reduce cotton imports by 20%, saving nearly $750 million USD annually.  The Upstream Circularity Playbook therefore builds on this research by providing an actionable framework for the industry to harness such opportunities.

With contributions from over 20 experts and organisations, the Playbook is designed to spur action on a global scale. It provides a blueprint for fostering economic, environmental, and social benefits in garment manufacturing regions and emphasises the need for collaboration across the value chain to achieve a scalable solution for textile-to-textile recycling.

The Upstream Circularity Playbook is openly accessible and available in six languages, inviting stakeholders worldwide to provide feedback and join the conversation.

Source:

Global Fashion Agenda

Textilrecycling Graphik: Andritz
28.11.2024

ANDRITZ: Engineering order for textile recycling plant from Circ®

International technology group ANDRITZ has received an engineering order from US textile recycling innovator Circ in anticipation of its first large-scale textile recycling plant. The plant will be the first to recover cotton and polyester from blended textile waste.

Circ® is a pioneering company focused on sustainable solutions for the fashion industry. By converting fashion waste into reusable raw materials for fabrics, Circ reduces the need for petroleum and natural resources. The company’s mission is to build a truly circular economy to protect the planet from the cost of clothing.

ANDRITZ has been successfully conducting trials for Circ at the ANDRITZ Fiber R&D Center in Springfield, Ohio, USA, for several years. The successful partnership and recent developments have led to the decision to expand this cooperation.

International technology group ANDRITZ has received an engineering order from US textile recycling innovator Circ in anticipation of its first large-scale textile recycling plant. The plant will be the first to recover cotton and polyester from blended textile waste.

Circ® is a pioneering company focused on sustainable solutions for the fashion industry. By converting fashion waste into reusable raw materials for fabrics, Circ reduces the need for petroleum and natural resources. The company’s mission is to build a truly circular economy to protect the planet from the cost of clothing.

ANDRITZ has been successfully conducting trials for Circ at the ANDRITZ Fiber R&D Center in Springfield, Ohio, USA, for several years. The successful partnership and recent developments have led to the decision to expand this cooperation.

The majority of fashion waste consists of polyester-cotton blends, which poses a significant challenge to achieving greater circularity. In particular, the separation of cellulosic and synthetic fibers from textile waste has been a major obstacle. Circ’s innovative recycling process can break down polycotton textile waste into its original components – polyester and cotton. The forthcoming plant will process 200 tons of textile waste per day, allowing cotton to be recycled for lyocell production and polyester to be reused for polyester production. This will reduce the need for virgin raw materials.

Conor Hartman, Chief Operating Officer at Circ, says: “We remain excited about this continued collaboration with ANDRITZ. Together, we will commercialize Circ’s innovative recycling process and take another step towards a truly circular fashion industry. With its expertise in engineering and building large-scale process equipment, ANDRITZ is the right partner to help us transform textile waste into recycled fibers on an industrial level.

Michael Waupotitsch, Vice President Textile Recycling at ANDRITZ, comments: “We are eager to support Circ in their vision of circularity because the technology they have developed is uniquely suited to solve one of the biggest challenges in fashion waste and recycling. With our holistic knowledge in resizing, mechanical separation, hydrothermal processing, recovery of cellulosic pulp as well as pulp cleaning and pulp drying, we have the right expertise to help them achieve their goals. Our experience in process development and machinery will help bring their innovative recycling technology to life.”

Contra Denim Jeans. Photo: Archroma
Contra Denim Jeans.
28.11.2024

Archroma: New DENIM HALO process for laser-friendly denim

Archroma, a global leader in specialty chemicals towards sustainable solutions, will showcase innovations for the denim industry at Sustainability Talks in Istanbul, Turkey and Denim Première Vision in Milan, Italy next month.

Specifically, Archroma will highlight its DENIM HALO pretreatment and dyeing process for laser-friendly, easily washable denim. It will also join its partners Kipaş Denim and Jeanologia to launch a joint hangtag for the upcoming Kipaş Denim Contra Denim collection, which is based on the DENIM HALO concept.

“Denim continues to be an incredibly exciting market segment, with brands and mills pushing the limits in terms of sustainability and aesthetics to give consumers the iconic look and feel of denim in a more environmentally conscious way,” Umberto De Vita, Archroma’s Market Segment Director - Denim, said. “Guided by our PLANET CONSCIOUS+ approach, we develop solutions that not only help our customers navigate the shift to cleaner chemistries and resource-saving processes, but improve their productivity and competitiveness too.”

Archroma, a global leader in specialty chemicals towards sustainable solutions, will showcase innovations for the denim industry at Sustainability Talks in Istanbul, Turkey and Denim Première Vision in Milan, Italy next month.

Specifically, Archroma will highlight its DENIM HALO pretreatment and dyeing process for laser-friendly, easily washable denim. It will also join its partners Kipaş Denim and Jeanologia to launch a joint hangtag for the upcoming Kipaş Denim Contra Denim collection, which is based on the DENIM HALO concept.

“Denim continues to be an incredibly exciting market segment, with brands and mills pushing the limits in terms of sustainability and aesthetics to give consumers the iconic look and feel of denim in a more environmentally conscious way,” Umberto De Vita, Archroma’s Market Segment Director - Denim, said. “Guided by our PLANET CONSCIOUS+ approach, we develop solutions that not only help our customers navigate the shift to cleaner chemistries and resource-saving processes, but improve their productivity and competitiveness too.”

Innovative DENIM HALO process
The DENIM HALO process combines Archroma’s new DIRSOL® RD special pretreatment with its DENISOL® indigo dyes, including an aniline-free formulation, or DIRESUL® sulfur black, sulfur blue or sulfur colors dyestuffs to achieve a ring-dyeing effect. This superficial dyeing creates laser-friendly denim for popular worn or distressed washdown effects while reducing yarn shrinkage and improving garment tensile strength.

Crucially, the new process also delivers a substantially reduced environmental footprint compared to industry-standard denim finishing. It avoids processes like manual hand scraping or potassium permanganate spraying and helps reduce caustic soda use in sulfur dyeing, which lowers the effluent load and improves weaving efficiency.

Low-impact Contra Denim collection
Archroma will also join Kipaş Denim, a leader in integrated textile production based in Turkey, and Jeanologia, a sustainable textile solutions company, to launch a hangtag program for the upcoming Kipaş Denim Contra Denim collection.

Based on DENIM HALO, the Contra Denim concept is a dyeing and finishing process that enables brands to create stunning and long-lasting distressed looks and design effects, such as intricate patterns, whiskering and fades, through cleaner processes that save water and energy and reduce greenhouse gas emissions. The hangtag will enable partner brands to communicate these benefits to consumers at the point of sale, nurturing transparency and trust.

The Archroma team at Sustainability Talks 2024
Sustainability Talks is an intensive one-day event that emphasizes networking and collaboration to solve the textile industry’s toughest challenges through sustainable solutions (Archroma in Turkey at Booth 20 at the Hilton Istanbul Bomonti Conference Center for Sustainability Talks on December 3, 2024).

Archroma at Denim Première Vision 2024
Denim Première Vision is bringing the global denim community to Milan, Italy in December to explore denim trends, markets and culture through the lens of eco-responsibility. Meet our experts Umberto De Vita and Julio Perales to learn more about our denim solutions. (Archroma in Milan at Booth C14 at Superstudio Più for Denim Première Vision on December 4-5, 2024).

Source:

Archroma

LIFE ANHIDRA project Photo: (c) Pizarro
LIFE ANHIDRA project
28.11.2024

Revolutionizing sustainable water management in the textile industry

The European LIFE ANHIDRA project marks a milestone in sustainability with the unveiling of its innovative closed-loop system for treating and reusing textile wastewater. During the event held at the Pizarro facility in Guimarães (Portugal), ANHIDRA was introduced as a revolutionary solution transforming water management in the textile industry. The event brought together the project’s key partners: Jeanologia, the Spanish company responsible for designing and building ANHIDRA and a global leader in sustainable technologies for the textile sector; AITEX, the Textile Industry Research Association; and Portuguese textile company Pizarro, accompanied by representatives from the European Commission.

The European LIFE ANHIDRA project marks a milestone in sustainability with the unveiling of its innovative closed-loop system for treating and reusing textile wastewater. During the event held at the Pizarro facility in Guimarães (Portugal), ANHIDRA was introduced as a revolutionary solution transforming water management in the textile industry. The event brought together the project’s key partners: Jeanologia, the Spanish company responsible for designing and building ANHIDRA and a global leader in sustainable technologies for the textile sector; AITEX, the Textile Industry Research Association; and Portuguese textile company Pizarro, accompanied by representatives from the European Commission.

A solution to reduce the textile industry’s water footprint
The textile industry consumes an estimated 93 billion m³ of water annually, accounting for 4% of global water use. ANHIDRA addresses this critical challenge by regenerating up to 95% of the water used in textile washing and finishing processes, returning it in optimal conditions for reuse.
With zero discharges, zero contamination, and no complex treatments, ANHIDRA stands out with exceptional results:

  • 92% reduction in water consumption
  • 98% reduction in wastewater generation
  • Up to 15% reduction in energy consumption

ANHIDRA not only minimizes environmental impact but also reduces the operational costs associated with traditional water management, making it a competitive and eco-friendly solution.

Innovation and circular economy
Beyond water regeneration, ANHIDRA focuses on reusing textile waste. In collaboration with AITEX, the project is exploring how to transform fibrous fragments collected during water treatment into new textile products, reinforcing the project’s commitment to the circular economy.

"ANHIDRA not only transforms water management in the textile industry but also proves that sustainability and competitiveness can go hand in hand. This system sets a new global benchmark," said Vicent Albert, Jeanologia’s Product and Technology Director.

During the event, attendees observed the various stages of the system in action at the Pizarro pilot plant. The project plans to implement ANHIDRA in at least 36 industrial facilities over the next three years, aiming to expand to 100 systems internationally within five years. This is expected to save up to 12.34 million m³ of water annually.

Funded by the European Union's LIFE program, LIFE ANHIDRA demonstrates how business cooperation and technological innovation can provide effective solutions to major environmental challenges. "Our goal is to make this technology accessible to the entire textile industry, contributing to a more sustainable future for fashion and the planet," concluded Vicent Albert, project coordinator.

________________________________________

This project has received funding from the European Union's LIFE program (grant agreement no. 101074372). The content of this document is the sole responsibility of the authors and does not necessarily reflect the position of the European Union, CINEA, or the corresponding funding program.

 

Source:

ANHIDRA project

Hydrogen-powered spray booth (c) AkzoNobel
Hydrogen-powered spray booth
27.11.2024

AkzoNobel: Hydrogen-powered spray booth at new automotive training center

One of the automotive industry’s first hydrogen-powered spray booths has been installed by AkzoNobel at a new training center in Belgium.

Located near Brussels, the facility is part of a multi-million euro program to expand and upgrade the company’s network of more than 40 Automotive Training Centers (ATCs), which are located across the globe.  

Designed to go beyond local and legislative requirements, the new spray booth highlights how embracing the latest technologies can contribute to more sustainable operations. The site itself – which is 30% larger than the one it’s replacing – has been constructed to be BREEAM certified, further demonstrating AkzoNobel’s commitment to reducing carbon emissions across the full value chain by 2030.

“The industry of the future requires painters of the future who are fully conversant with the latest technologies and techniques,” says Patrick Bourguignon, Director of the company’s Automotive and Specialty Coatings business. “By increasing the size of our Belgian facility by almost a third, we can accommodate more technology – such as the new spray booth – and train more people.

One of the automotive industry’s first hydrogen-powered spray booths has been installed by AkzoNobel at a new training center in Belgium.

Located near Brussels, the facility is part of a multi-million euro program to expand and upgrade the company’s network of more than 40 Automotive Training Centers (ATCs), which are located across the globe.  

Designed to go beyond local and legislative requirements, the new spray booth highlights how embracing the latest technologies can contribute to more sustainable operations. The site itself – which is 30% larger than the one it’s replacing – has been constructed to be BREEAM certified, further demonstrating AkzoNobel’s commitment to reducing carbon emissions across the full value chain by 2030.

“The industry of the future requires painters of the future who are fully conversant with the latest technologies and techniques,” says Patrick Bourguignon, Director of the company’s Automotive and Specialty Coatings business. “By increasing the size of our Belgian facility by almost a third, we can accommodate more technology – such as the new spray booth – and train more people.

The hydrogen-powered combi spray booth is fully equipped for traditional repairs and includes an all-in-one repairs workstation. It also has a special air filtration system which uses “active carbon” to filter any volatile organic compounds (VOCs) generated during the painting process. An extra high efficiency particulate air filter (HEPA) produces clean air (up to 99%), which is filtered back out into the atmosphere.

“By further upskilling painters, bodyshop managers and OEM engineers on a new generation of coatings and technologies, we can help them improve operational efficiency and reduce their own carbon emissions,” adds Bourguignon. “The investments we’re making in our ATCs will therefore address a growing global skills shortage, while also helping us set a new benchmark for sustainable practices in our industry.”

The company’s ATCs are part of a broader global network of training facilities that AkzoNobel operates across its businesses. They support customers and partners across key industries including aerospace coatings, decorative paints and yacht coatings.

Source:

AkzoNobel

Theme 1: QUANTUM Photo credit _ Courtesy Kim Farkas et Tara Downs Gallery, photo par Aurélien Mole. www.kimfarkas.com, @Kim_Farkas.jpg
27.11.2024

Texworld Apparel Sourcing: Trend book for the Spring-Summer 2026 season

Unveiled at the forthcoming Texworld Apparel Sourcing Paris trade fair, from 10 to 12 February at the Paris-Le-Bourget Exhibition Centre, the trend book for the Spring-Summer 2026 season opens up new creative worlds where emotion attempts to regain the upper hand over pure materials.

Entitled Néocène, the new forward-looking journey proposed by Louis Gérin and Grégory Lamaud, the artistic directors of Texworld Apparel Sourcing Paris, explores a world undergoing profound change. Conceived against a backdrop of severe economic, social and environmental tensions, this document is the result of cross-referencing and analysing emerging signals detected and interpreted by a panel of stylists, designers, graphic artists, authors and scenographers. In four major themes, it sets out an aesthetic framework to help fashion designers and buyers develop their spring-summer 2026 collections.

Unveiled at the forthcoming Texworld Apparel Sourcing Paris trade fair, from 10 to 12 February at the Paris-Le-Bourget Exhibition Centre, the trend book for the Spring-Summer 2026 season opens up new creative worlds where emotion attempts to regain the upper hand over pure materials.

Entitled Néocène, the new forward-looking journey proposed by Louis Gérin and Grégory Lamaud, the artistic directors of Texworld Apparel Sourcing Paris, explores a world undergoing profound change. Conceived against a backdrop of severe economic, social and environmental tensions, this document is the result of cross-referencing and analysing emerging signals detected and interpreted by a panel of stylists, designers, graphic artists, authors and scenographers. In four major themes, it sets out an aesthetic framework to help fashion designers and buyers develop their spring-summer 2026 collections.

1 wardrobe, 4 universes
A new era without humans, the Néocène is a clean slate, an indefinable horizon that obeys only the laws of physics. New shapes, new colours: each theme in this trend book reflects a creative universe organised around specific materials and 3 “star colours” in 6 intermediate shades. Presented in the introduction, these colours provide a glimpse of the palette for the collections to come.

#1 Quantum.
In this universe of atoms, everything is just energy, chance and freedom. This first proposal plunges back into the heart of substance with fluid, heated and incandescent materials, on the edge of solid and liquid. The soft textures and expanded forms are particularly at home here, and express themselves in a radiant, sunny colour system: spicy flavours, tones of tan and caramel are very present.

#2 Gravity.
“The structure of the universe [...] An invisible interdependence.” This theme plays on the multiple meanings of gravity: a heaviness that is both physical and emotional. Mineral and sandy materials, repetitive or sequential geometrical patterns, all find their place here, as do aqueous aspects and biomimetic and animal-inspired forms. The colour palette here is clearly diaphanous and serious, natural and diffuse.

#3 Relativity.
This proposition should be seen as a deepening of the previous theme, until the propositions are reversed: “Ugly has become beautiful [...] Stillness accelerates”. A world of oxymorons in which graphic motifs express a mummified vegetal world, supported by lines shaped like imprints, draped textures, embroideries intended as traces of an anterior world. The colours are those of ash, tattoo ink, animal... The blues and mauves are dark and intense.

#4 Magnetism.
In stark contrast to the other universes, this axis exalts order and renewal, and brings lightness, even fragility, to the creative approach. Transparency is assertive, as are floral motifs and curved, ample and comfortable lines. The colour palette is in tune with the emotion of the theme: marshmallows, sweet flavours, peach and blush pink are at the heart of the theme.

A new layout to maximize synergies
The return of the Texworld Apparel Sourcing Paris shows to Halls 2, 3 and 4 of the Paris-Le-Bourget Exhibition Centre is accompanied by an exciting new space organisation to make the buying experience even more efficient and inspiring. At the heart of hall 2, the Trends Forum will captivate visitor with its four dynamic themes, and will also house all key services, including the Agora for engaging conferences and lively round-table discussions, as well as inviting restaurants. In terms of products and services, some Texworld and Apparel Sourcing sectors have been brought together to promote synergies, with coherent areas devoted to women's clothing (Hall 4) and outdoor-sportswear-casualwear (Hall 3). This layout not only makes the Apparel Sourcing offering easier to navigate but also optimises the entire sourcing process, providing a more streamlined and productive experience.

Source:

Texworld

Adient Front Seat Cushion prototype Credits: Adient
Adient Front Seat Cushion prototype
27.11.2024

Adient, Jaguar Land Rover and Dow develop closed-loop PU foam seats

Adient, Jaguar Land Rover, and Dow have worked together to produce seat foam for the luxury car manufacturer’s vehicles using closed-loop recycled components. This represents an industry-first in the automotive sector, heading towards a circular economy and a lower CO2 footprint for cars as the end product.

In order to address the environmental impact of polyurethane (PU) foams used in car seats, the industry partners decided to team up. This means so-called ‘post-consumer’ PU molded foams have previously been collected from end-of-life vehicles, sorted, and shredded. On this basis, Dow produces a new, circular polyol, which is subsequently processed and integrated into Adient’s seating formulas. As a result, the Adient Front Seat Cushion prototypes are currently composed of 20% re-polyol from PU end-of-life vehicles.

Adient, Jaguar Land Rover, and Dow have worked together to produce seat foam for the luxury car manufacturer’s vehicles using closed-loop recycled components. This represents an industry-first in the automotive sector, heading towards a circular economy and a lower CO2 footprint for cars as the end product.

In order to address the environmental impact of polyurethane (PU) foams used in car seats, the industry partners decided to team up. This means so-called ‘post-consumer’ PU molded foams have previously been collected from end-of-life vehicles, sorted, and shredded. On this basis, Dow produces a new, circular polyol, which is subsequently processed and integrated into Adient’s seating formulas. As a result, the Adient Front Seat Cushion prototypes are currently composed of 20% re-polyol from PU end-of-life vehicles.

This is the first time, to the awareness of all parties involved, that a PU molded foam for seating applications has been produced under these conditions. This milestone represents a significant leap forward for the automotive industry, positioning PU at the heart of a circular economy system. By integrating recycled components into luxury vehicle seat foams, the partners are not only reducing the environmental impact but also paving the way for a more sustainable future in automotive manufacturing.

“Developing components with closed-loop recycled foams represents a major milestone for the team and simultaneously spurs us on to continuously increase the proportion of recycled materials in our seating systems in the future,” said Frank Toenniges, Director Sustainable Product Design & Business Process Improvements at Adient. “Additionally, it positions the actors along the value chain favorably to comply with the proposed European End-of-Life Directive.”

Andrea Debbane, Chief Sustainability Officer at JLR stated: “This breakthrough is a great example of how the automotive value chain can work as a collective to demonstrate that full circularity is feasible and unlock meaningful change at scale. This way of working holds significant potential for increasing sustainability and is critical to JLR's transition to more circular vehicles.”

As a next step, further research will be conducted to increase the percentage of re-polyol content. At the same time, the closed-loop seat foam will be tested with JLR on a production scale from early 2025.

26.11.2024

Cellulose Fibres Conference 2025: Preliminary Program released

The upcoming conference on 12-13 March 2025 in Cologne, Germany, will pave pathways to a sustainable textile industry.

Over the past few weeks, the Conference Advisory Board, and the experts from the nova-Institute, have thoroughly reviewed and evaluated over 40 submitted abstracts. The selected external experts bring new insights and perspectives from the pulp, fibre and further developing industries, promising to spark and deepen discussions at the event. Their expertise across the entire fibre value chain will enrich the topics covered and ensure a dynamic and insightful exchange of ideas. The presentations will provide a platform for the discussion at the conference after each session, and the Advisory Board members will foster a lively debate to drive innovation industry-wide.

The upcoming conference on 12-13 March 2025 in Cologne, Germany, will pave pathways to a sustainable textile industry.

Over the past few weeks, the Conference Advisory Board, and the experts from the nova-Institute, have thoroughly reviewed and evaluated over 40 submitted abstracts. The selected external experts bring new insights and perspectives from the pulp, fibre and further developing industries, promising to spark and deepen discussions at the event. Their expertise across the entire fibre value chain will enrich the topics covered and ensure a dynamic and insightful exchange of ideas. The presentations will provide a platform for the discussion at the conference after each session, and the Advisory Board members will foster a lively debate to drive innovation industry-wide.

Biosynthetics on the rise
Besides cellulose fibres, bio-based polymer fibres ("biosynthetics") are an excellent option to reduce fossil fibres in textiles. Biosynthetics offer a powerful alternative to traditional synthetic fibres, bringing both performance and technical properties that make them drop-in replacements. Derived wholly or partially from natural, renewable sources like lactic acids, sugar beet, sugarcane or wood, biosynthetics represent a bio-based option compared to fossil-based counterparts. In a special session “Biosynthetics - Replacing Traditional Synthetic Fibres”, experts will explore the latest advances, challenges and opportunities in the field. Discussing innovative approaches like biosynthetics is essential to drive sustainable transformation within the fashion and textile industries.

Fibre-to-Fibre Recycling: A Path to a Sustainable Textile Industry
The textile industry is at a crucial crossroad. The need for sustainable solutions to meet the EU's ambitious climate change targets is becoming increasingly urgent. Fibre-to-fibre recycling, which transforms discarded textiles into new, virgin fibres, holds great promise for reducing waste and resource consumption and helps to close the loop in textile production. While Europe has made progress in this area, challenges remain – in particular the management of mixed fibre textiles and the scaling up of recycling technologies. As new approaches are needed to tackle climate change, one session of the conference will focus on fibre-to-fibre recycling from textiles, exploring the latest innovations and technological advances, as well as the opportunities and barriers that need to be addressed to move the industry towards a circular, sustainable future.

Fibre Microplastic Formation versus Marine Biodegradability
The environmental impact of textiles extends far beyond landfill, with microplastics from synthetic fibres becoming a growing concern in marine ecosystems. A session at the conference will focus on the complex relationship between microplastic formation and marine biodegradability. While synthetic fibres shed microplastics during washing, these tiny particles, known as microfibres accumulate in the oceans and pose a serious threat to marine life. This session will explore the factors that influence fibre degradation in the marine environment and examine the potential of biodegradable fibres to reduce long-term pollution. Leading research institutes will discuss the challenges of balancing the prevention of microplastics with the development of fibres that can degrade naturally in marine ecosystems, and provide insights into innovative solutions that could help mitigate this pressing environmental issue.

Innovation Award “Cellulose Fibre Innovation of the Year 2025”
The nova-Institute, together with GIG Karasek, is looking for the best fibre innovations of the year. Applicants from the area of cellulose fibres as well as biosynthetics are welcome to submit their innovations. Technologie providers, research institutes or producers can apply until 30 November 2024. The innovation award “Cellulose Fibre Innovation of the Year 2025” is sponsored by GIG Karasek.

Apply for the “Cellulose Fibre Innovation of the Year 2025” award: cellulose-fibres.eu/award-application

Call for Posters
The poster exhibition is a highly anticipated scientific event at the conference, especially for early career scientists. Poster submission is open until 31 January 2025.

More information:
Cellulose Fibres Conference
Source:

nova-Institut für politische und ökologische Innovation GmbH

26.11.2024

Cellulose Fibres Conference 2025: Preliminary Program released

The upcoming conference on 12-13 March 2025 in Cologne, Germany, will pave pathways to a sustainable textile industry.

Over the past few weeks, the Conference Advisory Board, and the experts from the nova-Institute, have thoroughly reviewed and evaluated over 40 submitted abstracts. The selected external experts bring new insights and perspectives from the pulp, fibre and further developing industries, promising to spark and deepen discussions at the event. Their expertise across the entire fibre value chain will enrich the topics covered and ensure a dynamic and insightful exchange of ideas. The presentations will provide a platform for the discussion at the conference after each session, and the Advisory Board members will foster a lively debate to drive innovation industry-wide.

The upcoming conference on 12-13 March 2025 in Cologne, Germany, will pave pathways to a sustainable textile industry.

Over the past few weeks, the Conference Advisory Board, and the experts from the nova-Institute, have thoroughly reviewed and evaluated over 40 submitted abstracts. The selected external experts bring new insights and perspectives from the pulp, fibre and further developing industries, promising to spark and deepen discussions at the event. Their expertise across the entire fibre value chain will enrich the topics covered and ensure a dynamic and insightful exchange of ideas. The presentations will provide a platform for the discussion at the conference after each session, and the Advisory Board members will foster a lively debate to drive innovation industry-wide.

Biosynthetics on the rise
Besides cellulose fibres, bio-based polymer fibres ("biosynthetics") are an excellent option to reduce fossil fibres in textiles. Biosynthetics offer a powerful alternative to traditional synthetic fibres, bringing both performance and technical properties that make them drop-in replacements. Derived wholly or partially from natural, renewable sources like lactic acids, sugar beet, sugarcane or wood, biosynthetics represent a bio-based option compared to fossil-based counterparts. In a special session “Biosynthetics - Replacing Traditional Synthetic Fibres”, experts will explore the latest advances, challenges and opportunities in the field. Discussing innovative approaches like biosynthetics is essential to drive sustainable transformation within the fashion and textile industries.

Fibre-to-Fibre Recycling: A Path to a Sustainable Textile Industry
The textile industry is at a crucial crossroad. The need for sustainable solutions to meet the EU's ambitious climate change targets is becoming increasingly urgent. Fibre-to-fibre recycling, which transforms discarded textiles into new, virgin fibres, holds great promise for reducing waste and resource consumption and helps to close the loop in textile production. While Europe has made progress in this area, challenges remain – in particular the management of mixed fibre textiles and the scaling up of recycling technologies. As new approaches are needed to tackle climate change, one session of the conference will focus on fibre-to-fibre recycling from textiles, exploring the latest innovations and technological advances, as well as the opportunities and barriers that need to be addressed to move the industry towards a circular, sustainable future.

Fibre Microplastic Formation versus Marine Biodegradability
The environmental impact of textiles extends far beyond landfill, with microplastics from synthetic fibres becoming a growing concern in marine ecosystems. A session at the conference will focus on the complex relationship between microplastic formation and marine biodegradability. While synthetic fibres shed microplastics during washing, these tiny particles, known as microfibres accumulate in the oceans and pose a serious threat to marine life. This session will explore the factors that influence fibre degradation in the marine environment and examine the potential of biodegradable fibres to reduce long-term pollution. Leading research institutes will discuss the challenges of balancing the prevention of microplastics with the development of fibres that can degrade naturally in marine ecosystems, and provide insights into innovative solutions that could help mitigate this pressing environmental issue.

Innovation Award “Cellulose Fibre Innovation of the Year 2025”
The nova-Institute, together with GIG Karasek, is looking for the best fibre innovations of the year. Applicants from the area of cellulose fibres as well as biosynthetics are welcome to submit their innovations. Technologie providers, research institutes or producers can apply until 30 November 2024. The innovation award “Cellulose Fibre Innovation of the Year 2025” is sponsored by GIG Karasek.

Apply for the “Cellulose Fibre Innovation of the Year 2025” award: cellulose-fibres.eu/award-application

Call for Posters
The poster exhibition is a highly anticipated scientific event at the conference, especially for early career scientists. Poster submission is open until 31 January 2025.

More information:
Cellulose Fibres Conference
Source:

nova-Institut für politische und ökologische Innovation GmbH

26.11.2024

Ontex to buy back up to 1.5 million shares

Ontex Group NV, a leading international developer and producer of personal care products, announces the launch of a share buy-back program to acquire a maximum of 1.5 million shares, representing 1.8% of its issued shares. The shares acquired through the program will contribute to meeting Ontex’s obligations under its current and future long-term incentive plans. The share purchases will be spread over a seven-month period, starting on December 1, 2024 and ending on June 30, 2025.

The program will be conducted under the terms and conditions of the authorization granted by the extraordinary shareholders’ meeting held on May 5, 2023, and will be executed by an independent intermediary, who will make its decisions independently pursuant to a discretionary mandate. The timing of the transactions will depend on a variety of factors, including market conditions. The share buy-back program may be suspended or discontinued at any time.

Ontex Group NV, a leading international developer and producer of personal care products, announces the launch of a share buy-back program to acquire a maximum of 1.5 million shares, representing 1.8% of its issued shares. The shares acquired through the program will contribute to meeting Ontex’s obligations under its current and future long-term incentive plans. The share purchases will be spread over a seven-month period, starting on December 1, 2024 and ending on June 30, 2025.

The program will be conducted under the terms and conditions of the authorization granted by the extraordinary shareholders’ meeting held on May 5, 2023, and will be executed by an independent intermediary, who will make its decisions independently pursuant to a discretionary mandate. The timing of the transactions will depend on a variety of factors, including market conditions. The share buy-back program may be suspended or discontinued at any time.

In accordance with applicable laws and regulations, Ontex will publish weekly updates on the progress of its share purchases. During the term of the share buy-back program, Ontex’s liquidity contract will be suspended. As Ontex currently already holds 1.2 million shares in treasury, it will hold 2.7 million treasury shares upon completion of the program, representing 3.2% of its issued shares.

More information:
Ontex share buy-back program
Source:

Ontex Group NV

conference on flame retardancy for composites Photo AVK Industrievereinigung Verstärkte Kunststoffe e. V.
26.11.2024

Successful conference on flame retardancy for composites in Berlin

On November 20th/21st, 2024, the second conference on flame retardancy for composite applications took place in Berlin, organised by the AVK - Industrievereinigung Verstärkte Kunststoffe e.V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V.

60 participants attended the international event, which this time focused on the requirements in the construction/infrastructure sector in addition to the transport sector.

In 14 presentations, 18 speakers provided information on new developments, requirements and innovations from the fields of standardisation, material development, construction/infrastructure, public transport, automotive and research & science.

Prof. Schartel from the Bundesanstalt für Materialforschung und –prüfung began with an introduction to the principle and concept of flame-retardant composites. In the following thematic blocks, the companies CTS Composite Technologie Systeme GmbH and Nabaltec AG provided information on new possibilities and developments at the material level of non-combustible fibre-reinforced plastics (FRP).

On November 20th/21st, 2024, the second conference on flame retardancy for composite applications took place in Berlin, organised by the AVK - Industrievereinigung Verstärkte Kunststoffe e.V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V.

60 participants attended the international event, which this time focused on the requirements in the construction/infrastructure sector in addition to the transport sector.

In 14 presentations, 18 speakers provided information on new developments, requirements and innovations from the fields of standardisation, material development, construction/infrastructure, public transport, automotive and research & science.

Prof. Schartel from the Bundesanstalt für Materialforschung und –prüfung began with an introduction to the principle and concept of flame-retardant composites. In the following thematic blocks, the companies CTS Composite Technologie Systeme GmbH and Nabaltec AG provided information on new possibilities and developments at the material level of non-combustible fibre-reinforced plastics (FRP).

The implementation of fire protection requirements in the operation of rail vehicles or for load-bearing FRP components played a major role in the area of construction/infrastructure, as did the sustainability of these building materials, which Frank Lüders from DB Systemtechnik GmbH and Kabelan Thavayogarajah from Fraunhofer LBF reported on in their presentations.

The well-known topic of e-mobility took its place in the automotive sector, where Dr. Christian Battenberg from Clariant Plastics &Coatings (Deutschland) GmbH spoke about flame retardants for applications in this field.

The successful event was rounded off by the Research and Science block with two presentations by Fraunhofer LBF and Deutsches Textilforschungszentrum Nord-
West gGmbH & Centre for Nanointegration Duisburg-Essen.

Over the course of one and a half days, the conference provided an important platform for experts from industry and science to discuss the latest developments and challenges in the field of flame retardancy for composites. The high level of participation highlighted the relevance of the topic and underpinned the decision to organise a third round of the conference in 2026.

Source:

AVK  Industrievereinigung Verstärkte Kunststoffe e. V.