From the Sector

Many end-users now expect recycled materials to be in textile products they purchase – and this is driving innovation throughout the industry. However, there are still many technical and economic issues facing yarn and fabric producers using recycled resources. Members of the Swiss Textile Machinery Association offer some effective solutions to these challenges.

Synthetic recycled materials such as PET can usually be treated similarly to new yarn, but there are additional complexities where natural fibres like wool and cotton are involved. Today, there’s a trend towards mechanically recycled wool and cotton fibres.

Spinning recycled cotton
The use of mechanically recycled fibres in spinning brings specific quality considerations: they have higher levels of short fibres and neps – and may often be colored, particularly if post-consumer material is used. It’s also true that recycled yarns have limitations in terms of fineness. The Uster Statistics 2023 edition features an extended range of fibre data, supporting sustainability goals, including benchmarks for blends of virgin and recycled cotton.
In general, short fibres such as those in recycled material can easily be handled by rotor spinning machines. For ring spinning, the shorter the fibres, the more difficult it is to guide them through the drafting zone to integrate them into the yarn body. Still, for wider yarn counts and higher yarn quality, the focus is now shifting to ring spinning. The presence of short fibres is a challenge, but Rieter offers solutions to address this issue.

Knitting recycled wool
For recycling, wool fibres undergo mechanical procedures such as shredding, cutting, and re-spinning, influencing the quality and characteristics of the resulting yarn. These operations remove the natural scales and variations in fibre length of the wool, causing a decrease in the overall strength and durability of the recycled yarn. This makes the yarn more prone to breakage, especially under the tension exerted during knitting.

Adapting to process recycled materials often requires adjustments to existing machinery. Knitting machines must be equipped with positive yarn suppliers to control fibre tension. Steiger engages in continuous testing of new yarns on the market, to check their suitability for processing on knitting machines. For satisfactory quality, the challenges intensify, with natural yarns requiring careful consideration and adaptation in the knitting processes.

From fibres to nonwovens
Nonwovens technology was born partly from the idea of recycling to reduce manufacturing costs and to process textile waste and previously unusable materials into fabric structures. Nonwovens production lines, where fibre webs are bonded mechanically, thermally or chemically, can easily process almost all mechanically and chemically recycled fibres.

Autefa Solutions offers nonwovens lines from a single source, enabling products such as liners, wipes, wadding and insulation to be produced in a true closed loop. Fibres are often used up to four times for one product.

Recycling: total strategy
Great services, technology and machines from members of Swiss Textile Machinery support the efforts of the circular economy to process recycled fibres. The machines incorporate the know-how of several decades, with the innovative power and quality standards in production and materials.
Stäubli’s global ESG (environmental, social & governance) strategy defines KPIs in the context of energy consumption, machine longevity and the recycling capacity in production units worldwide, as well in terms of machinery recyclability. The machine recyclability of automatic drawing in machines, weaving systems and jacquard machines ranges from 96 to 99%.

Operating in Bangladesh since 1996, this is the fourteenth time the Japanese manufacturer is participating in DTG.

As the Bangladeshi textile industry calls for sustainable production through innovation and digitalization, the market is keen to establish effective business models that support such production. In response, for the first time in its DTG exhibition history, SHIMA SEIKI's lineup consists entirely of WHOLEGARMENT® knitting machines. Capable of knitting an entire garment in one piece without the need for linking or sewing while using only the material required to knit one garment at a time, WHOLEGARMENT® knitting is famous for promoting sustainability in the knit factory.

The company is showing its MACH2®XS153 WHOLEGARMENT® knitting machine in 15L gauge, as well as its SWG®091N2 "Mini" WHOLEGARMENT® knitting machine in 15 gauge. MACH2®XS features 4 needle beds and SHIMA SEIKI's original SlideNeedle™, capable of producing high-quality fine gauge WHOLEGARMENT® knitwear in all needles. SWG®091N2 provides opportunities in WHOLEGARMENT® knitting across a wide range of items in a compact, economical package. A different approach to WHOLEGARMENT knitting is also shown in the form of the N.SVR®183 machine. SHIMA SEIKI's global standard in shaped knitting, the N.SVR® series now features a model for producing WHOLEGARMENT® knitwear using every other needle in fine gauge. Shown in 18 gauge at DTG, N.SVR®183 is the ideal machine for flexible, entry-level WHOLEGARMENT® production, with the versatility to respond to fluctuating market demand.

Demonstrations are performed on SHIMA SEIKI's SDS®-ONE APEX4 design system. At the core of the company’s "Total Fashion System" concept, it provides comprehensive support throughout the supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to machine programming, production and even sales promotion.

Mahlo GmbH + Co. KG will participate in the Colombiatex textile show, held in Medellin from 23 to 25 January. This year, Mahlo will be joining forces with Brückner Textile Technologies to present their solutions for the textile production sector at their joint booth.

Both companies appreciate the power of Colombia’s textile industry. Textile is one of the most important industrial sectors in the Latin American country with an export value of clothing of more than 600 million US dollars. The United States are also the main export destination for apparel products. At Colombiatex 2024, Mahlo's Head of Sales, Thomas Höpfl, will be present to share insights and discuss how Mahlo’s innovative technologies can address the specific challenges faced by Colombian textile manufacturers. Sustainability of process efficiency being among the most pressing ones.

Happy New Year 2024! Here's to a year full of innovation and success in the textile and apparel industry.

The Textination team sincerely wishes you a great start: may 2024 be full of health, joy and energy for you.

There are undoubtedly 365 days of exciting encounters, developments, innovations and new trends ahead in our shared world of the textile and apparel industry. We would like to join you on this journey and document the many facets of our industry.

We are convinced that the new year will be just as fascinating and inspiring for our users as the best textile products and designs that our industry has to offer. We look forward to accompanying you through the coming 12 months with the latest news, in-depth analyses and exclusive insights.

Thank you for your continued support and interest in Textination.

Together we will tell textile tomorrow!

Ines Chucholowius
- Managing Director -

Partnership between Nouvelles Fibres Textiles, Pellenc ST and ANDRITZ promotes circular economy for textiles.

France’s first industrial plant for automated sorting and recycling of textile waste was officially inaugurated at Nouvelles Fibres Textiles, Amplepuis, on November 30, 2023. The plant is the result of an ambitious partnership between textile recycling company Nouvelles Fibres Textiles, waste sorting specialist Pellenc ST and international technology group ANDRITZ, a specialist in textile recycling machinery and processes.

Capable of automatically sorting garments by composition and color, the new line meets the needs of both post-consumer and post-industrial waste markets. The line also removes hard parts such as buttons and zippers to prepare the material for further processing in an ANDRITZ tearing machine.

The automated textile sorting line at Nouvelles Fibres Textiles is dedicated to industrial-scale production, customer trials and projects, and the R&D activities of the partners. It will process textile waste to produce recycled fibers for the spinning, nonwovens, and composites industries.

Automated sorting was the last missing link needed to develop a complete ecosystem in France, where the fashion industry, social and solidarity economy actors, waste management companies, and textile producers from different sectors are working together towards a textile circular economy.

The EU's strategy for sustainable and circular textiles aims to ensure that by 2030 textile products are made to a great extent of recycled fibers and incineration and landfilling of textiles are minimized.

ITMA ASIA + CITME, Asia’s leading trade fair for textile machinery, took place in Shanghai with a considerable presence of VDMA member companies. The round about 40 exhibiting VDMA members covered nearly all different machinery chapters with a focus on spinning and manmade fibers, nonwovens, weaving, braiding, knitting & hosiery, finishing & dyeing and textile processing. They were part of a strong German presence with a total of around 60 German exhibitors – including non-machine manufacturers.

During a press conference on the first day of the show, Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association and managing director of August Herzog Maschinenfabrik expressed: “After years of cancelled or postponed trade fairs and travel restrictions, this year’s ITMA ASIA + CITME is the first edition of the show that can be attended not just by Chinese but by visitors from various countries and regions. The event is a good opportunity to meet customers and partners again in person and not just on a screen. ITMA ASIA + CITME provides a good chance to deepen the already good relations with China and other Asian countries further and to set-up new partnerships.”

Dr. Horn continued to present latest facts and figures about the German textile machinery industry. Between January and August 2023, the overall exports of textile machinery and accessories summed up to 1.7 billion euros, which was a slight decrease compared to the same period in 2022. The shipping to almost all major markets decreased between January and August: China: 440 million € (2022: 453 million €), Turkey: 205 million € (2022: 265 million €), USA: 177 million € (2022: 144 million €), India: 170 million € (2022: 228 million €).

Numerous VDMA member companies have production sites in the major Asian markets China and India and serve their customers in these countries from there. A latest VDMA business climate survey among the textile machinery companies in China showed, that 75% of all participants assessed their current business situation as either good (6%) or satisfactory (69%). For the coming quarter, 50% of the companies see the market to decline. Asked about the business situation during the next six months, 44% of the companies expect the market to remain stable, 56% expect the situation to become worse. This is also reflected in the HR of the companies: 63% expect the number of employees to remain unchanged.

The textile machinery orders index, as processed by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped fully 20% during the third quarter of 2023, compared to the same period for July to September 2022. In absolute terms, the index stood at 84.2 points (basis: 2015=100).

This result is due to a reduction in new orders recorded by manufacturers both on the domestic market and abroad. The decrease in orders in Italy came in at 45%, whereas the drop was just 13% on foreign markets. The absolutevalue of the index abroad stood at 80.5 points, and 119.4 points in Italy. During the year’s third quarter, new orders reached 3.7 months of assured production.

ACIMIT President Marco Salvadè commented on the data, stating that, “The order index for the period from July to September 2023 confirms a contraction in collected orders that was already evident in previous quarters. What worries us above all is the situation with our domestic market, where the declining trend has persisted for seven consecutive terms. Due to this situation, which does not only concern the textile machinery industry, urgent measures are needed from Italian Government to strengthen the competitiveness of Italian manufacturers.”

As far as foreign markets are concerned, the orders index confirms an overall weakened global demand for textile machinery. Indeed, for the first half of 2023, Italian exports slowed in a variety of essential benchmark markets, such as Turkey, China and the United States.

“The global economic scenario remains negative, as consumers are facing a reduced purchasing power, with investments in the textile sector consequently also slowing down,” concludes Salvadè. “In less than a month, ITMA ASIA + CITME will be held from 19 to 23 November in Shanghai, primed as one of the world’s major trade fairs for the textile machinery industry, with the participation of roughly 60 Italian textile machinery manufacturers. We can expect some significant indications on the industry’s state from this event, which will be staged in one of the strategic markets for textile machinery demand.”

In China, the textile industry is forward-looking and resilient – with a healthy appetite for new technologies and a determination to keep its leading position. Sustainability is increasingly coming into focus, so there is a growing demand for recycling technologies, as well as automated solutions and digitalization. Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association, is clear: “China is the main market for a large number of our association members.” On top of growing consumer demand and technological capabilities, the latest ambitious five-year plan will drive further development of the Chinese textile industry in world markets, and Swiss companies will work with all stakeholders to enable its success.

Market proximity
Swiss companies realized many years ago that geographical proximity is the key to success. Stäubli has started to set up offices in Chinese cities since 1998 and counts 12 locations today, to serve the whole country. In 2002, Itema established a centralized local branch which today has 160 employees in various functions. Loepfe has expanded its presence by creating an independent local business unit to overcome the 9,000 km distance by air, while Uster Technologies has had a Chinese subsidiary since 1982, with offices and service stations in different provinces. Luwa set up its offices and workshop in Shanghai in 1997. Rieter established a presence in mainland China in 2005, driven by a strong commitment to expanding the country’s know-how and expertise – and ten years later opened an advanced research center. All Swiss companies with serious business goals in China have made similar commitments to connect with customers and maintain strong relationships.

Understanding Chinese customers
Swiss companies also understand that Chinese customers require dedicated attention, and that speed is more essential than ever in delivering both machines and services.
Manufacturers in China are seeking cost-effective solutions to remain competitive, while consumers are looking for value in their purchases. Companies need to develop solutions that provide tangible economic benefits to their clients. Furthermore, energy savings have become paramount in China, due to the government's commitment to environmental sustainability and reduced carbon emissions. “Businesses are adopting more energy-efficient processes and technologies to meet stringent energy conservation and emission reduction targets,” says Peter Schnickmann, Managing Director at Luwa Air Engineering (Shanghai). He notes an investment trend for solutions helping Chinese companies cut operational costs and minimize their carbon footprint.

To enhance the reputation of both companies and products – and boost the image of the entire industry – the environmental impact needs to decrease. Priorities are saving water and waste, as well as reducing, replacing or completely eliminating the use of harmful substances. China has a strong demand for environmental-friendly solutions and sustainable technologies.

Customer-oriented in weaving
The huge number of Chinese fabric producers calls for an immense volume of weaving machinery to be supplied by international and local providers. Swiss machinery manufacturers hold an impressive share of this business.
Chinese weavers require advanced technology, with increasingly higher standards of efficiency. In weaving preparation, latest solutions match the speed, quality and reliability now wanted. Weaving machines too offer the eco-efficiency, performance, and ease of use needed, with innovations that extend the scope of sustainable weaving, and open-platform systems configurable to weavers’ specific operations. A huge increase in demand for technical textiles in recent years has been driven by applications such as carbon fiber, aramid and glass fiber.

Profitable in spinning
China’s competitive advantages come from its large-scale and integrated manufacturing capabilities, along with the use of advanced automation and digitization technologies. Spinners aim to capitalize on extended market opportunities, with more economical production. The latest air-jet spinning machines serve these goals, allowing exceptionally low production costs per kilogram of yarn, coupled with high flexibility and reliability. Sustainable yarns are in great demand.

The automation trend in spinning mills focuses on connecting production processes. Data is used to ensure the highest quality standards, most efficient raw material usage, reduction of waste, and energy savings. To make spinning mills more competitive, latest solutions combine cutting-edge hardware, data-enabled software and renowned textile expertise.

In order to be even closer to the customer, Groz-Beckert opened a new sales office in Surat, Gujarat, India. The inauguration of the new sales office took place on Sunday, October 15, 2023, with an official opening ceremony.

With the new office, Groz-Beckert aims to provide even better support for its customers from the knitting industry – especially from the circular knitting and warp knitting industry – as well as from the sewing industry in the growing market in Surat and the surrounding area.

Surat has a very old textile production and trade history, dating back to the 16th century. The city is known as the “Textile and Silk City” of India. Today it is an important hub for large-scale production of synthetic textiles and skilled workforce. The textile Industry in Surat produces est. 25 Million meters of fabrics per day. It is also considered to be the financial capital and the growth engine of Gujarat.

Founded in 2013, NOPINZ is a UK-based manufacturer of clothing for cyclists and triathletes. The company's first product was the ‘SpeedPocket’, a product that allows competitors to attach their race numbers more easily (and with ‘no pins’) while improving the all-important aerodynamics. Soon recognising the customer demand for premade attire with incorporated number pockets, the company embarked on a mission to manufacture these new product lines itself. Today, NOPINZ boasts a diverse portfolio, with 60% of its products made in-house, catering to a growing customer base across the UK and international markets. NOPINZ creates speed suits for some of the world’s top cycling teams, as well as competitive amateurs.

NOPINZ places a strong emphasis on sustainability and is committed to minimising its environmental impact. Using a microfactory approach gives better oversight and control of the manufacturing process, including sourcing materials sustainably and locally where possible, reducing transportation, and improving access to recycling. “Our ‘zero to landfill’ policy, means that we reduce our wastage where possible and either recycle or donate excess product to charity,” Blake adds. “We hope to become a B-Corp company in the future.”

“We tested out a few printers, before we ultimately settled on Mimaki,” Blake Pond, the founder of NOPINZ explained. Now the company’s line-up entirely consists of Mimaki’s textile dye sublimation solutions.
“During our search we prioritised the ability to produce fluorescence and accurately replicate colours. Customers often come to us with existing kit made by other manufacturers, which they want to match, so accurately replicating colour is extremely important. And even without existing kit, customers occasionally ask for specific pantone colours. When it comes to cycling kit, colour is often pivotal when considering where to buy from.”

As two flagship dye sublimation printers, both the TS300P-1800 and TS55-1800 are equipped to print on the various technical fabrics that are needed for cycling attire and faithfully reproduce colours to meet customer expectations.