From the Sector

• Innovative BCF S8 platform technology opens up new carpet yarn industry markets for Oerlikon Neumag customers

World premiere at the DOMOTEX World Trade Fair for Carpets and Floor Coverings in Hanover: between January 11 bis 14, 2019‎, Oerlikon Neumag will be showcasing its innovative new development, the BCF S8, to a wide audience for the very first time in Hall 11, Stand B36. Whether commodities or niche products – the new BCF S8 platform technology offers manufacturers of BCF carpet yarns decisive arguments for responding to constantly rising cost pressures and the trend for greater efficiency and quality in fiercely-competitive markets. World record: the system achieves never-seen-before spinning speeds and is able to simultaneously spin up to 700 filaments and produce fine titers of up to 2.5 dpf. This superlative performance is guaranteed by numerous individual innovations in the new platform and, for the first time, also in a new human-machine interface (HMI)-based control system, which opens the door to the digital age of smart carpet yarn manufacturing wide. At the ITMA ASIA 2018, the Oerlikon Manmade Fibers segment had already announced that it would be presenting revolutionary solutions in 2019 – both in hardware and software. And the DOMOTEX marks only the start.

According to manufacturer information, the new BCF S8 is the most efficient Oerlikon Neumag BCF system of all times. “We have succeeded in achieving a new level of greater productivity and even broader product diversity. These allow our clientèle to better cater to changing market requirements and achieve a competitive edge in tough market conditions”, explains Martin Rademacher, Vice President Sales Oerlikon Neumag. As a pre-taste, the machine specialists from Neumünster are serving up performance figures and results from comprehensive trials conducted at their own BCF technology center as well as from two pilot systems which have been tried and tested within the market for months now.

BCF S8 performance in numbers
With up to 700 potential filaments per yarn end, the BCF S8 is raising the benchmark considerably compared to the Oerlikon Neumag S+ BCF system (400 filaments) that has dominated the global market to date. Oerlikon Neumag guarantees fine titers of up to 2.5 dpf. Furthermore, the process speed is higher than ever before – 3,700 m/min (winder speed). This permits throughputs of up to 15 percent greater compared to predecessor technologies. Overall, system efficiency is 99 percent – almost unbeatable. True to the Oerlikon Segments Manmade Fibers segment e-save philosophy, energy savings of up to 5 percent per kilogram of yarn are achievable.

BCF S8 innovations – from straight yarn paths to large cooling drums

This comprehensive progress has been achieved with numerous smart innovations. To this end, one key element above all has been optimized. The yarn path from the spinning system to the new, large cooling drum has now been almost completely straightened. This yarn path, unique to the BCF market to date, ensures that the individual filaments are subjected to minimum friction, hence once again considerably reducing yarn breaks and optimizing the overall production process. Especially noteworthy here are the, for the first time, straight yarn inlet in the texturing head – guaranteeing superior yarn quality.

And the considerably reduced distance between the heating godet duo and the texturing head also has a positive impact on the texturing process. It ensures a more even twist to the yarn and reduces the compressed air consumption. Furthermore, the texturing chambers can be removed individually, which additionally shortens servicing times. The now closed units also provide the best possible protection for the texturing jets and lamellar chambers.

The 800-mm diameter cooling drum optimally and gently cools the filaments. And this has a positive influence on the yarn quality. The new cooling drum is now equipped with a V groove for all polymers (PET, PA6 and PP) as standard.

The RoTac3 tangling unit, already established within the market, once again reduces the compressed air consumption by around 50%, while the newly-developed Witras III-37 winder achieves production process speeds of 3,700 m/min.

First intuitively-operable human-machine interface (HMI)
The new BCF S8 is the first Oerlikon Manmade Fibers segment system equipped with the innovative human-machine interface (HMI) for intelligent controlling and monitoring. In this case, the interface between man and machine has been oriented on the daily requirements of users in BCF production. With its new ‘look and feel’, it supports intuitive operation and offers direct access to important information as well as actual and target values at each take-up position by means of a touch screen. A completely new ‘alarm philosophy’ also simplifies troubleshooting and malfunction analysis. “This smart HMI system is a logical step in the digitalization of our products”, explains Dr. Friedrich Lennemann, Vice President R&D Oerlikon Neumag.

New products for photopolymer and laser sinter printing methods from BASF 3D Printing Solutions GmbH (B3DPS) are on show from November 13 to 16 at Stand F20 in Hall 3.1 at this year’s formnext fair in Frankfurt. The BASF subsidiary is also announcing several new partnerships for the development and distribution of groundbreaking 3D printing solutions and products.

B3DPS has entered into a strategic partnership with the US company Origin, San Francisco, California for the further development of photopolymer printing processes. “Within the framework of an open business model, we are combining BASF’s material know-how with Origin’s expertise in printer software programming and the manufacture of the corresponding hardware,” explained Volker Hammes, Managing Director BASF 3D Printing Solutions GmbH. The collaboration has already shown the first signs of success. Origin has developed a new printing method where BASF’s new Ultracur3D photopolymers can be processed particularly well. The technology offers an optimal combination of a good surface finish and high mechanical stability, while also allowing for high material throughput.

B3DPS is working together with Photocentric, a manufacturer of 3D printers and their corresponding software and materials, on the development of new photopolymers and large-format photopolymer printers for mass production of functional components. Based in Peterborough, UK and Phoenix, USA, Photocentric has developed and optimized the use of LCD screens as image generators for its own printing systems. The two partners plan to offer the industry 3D printing solutions that replace parts of traditional manufacturing processes such as injection molding for small series, as well as enabling the production of large components.

The objective of the cooperation with Xunshi Technology, a Chinese printer manufacturer headquartered in Shaoxing, and operates in USA under the name Sprintray, will be opening new fields of application in 3D printing for the Ultracur3D product range of B3DPS.

Ultracur3D specialties for photopolymer printing processes
B3DPS has grouped well-established and new photopolymers designed for the respective 3D printing processes under the brand name Ultracur3D. BASF has developed unique raw materials for its new products that enable special part properties.
“Our Ultracur3D portfolio enables us to offer customers various UV-curable materials for 3D printing that provide far better mechanical properties and higher long-term stability than most available materials,” explained András Marton, Senior Business Development Manager at B3DPS. He added: “These materials have been developed for functional components that are subject to high stress.”

Expansion of distribution network for filaments
Innofil3D, a subsidiary of B3DPS, is entering into a partnership with Jet-Mate Technology, based in Tjanjin, China, for the distribution of plastic filaments in China. In parallel, a distribution agreement has been concluded with M. Holland in Northbrook, USA for the distribution of filaments in USA. “Since the USA is the largest market for filaments, we intend to strengthen our activities there,” said Jeroen Wiggers, Business Director 3DP Solutions for Additive Extrusion at B3DPS, adding: “Asia is another important market for us. We will be developing further distribution channels there and putting our Ultrafuse filaments on the Asian market in 2019.”

BASF’s portfolio of filaments for 3D printing are comprised of two categories; the well-established Innofil3D filaments based on generic polymers for conventional applications and polymer-based Ultrafuse filaments for advanced formulations used in demanding technical applications. One of the broadest filament selections on the market, this portfolio covers customer requirements ranging from prototype to industrial-scale production.

SLS: new 3D printing material with fire protection classification
New flame-resistant Ultrasint Polyamide PA6 Black FR meets UL94 V2 fire protection standards and is a new material class for use in selective laser sintering (SLS) processes, distinguished by high stiffness and thermal stability. In cooperation with one of the global leaders of public transportation vehicles, B3DPS has developed new components that meet vehicle fire protection requirements. “Together with our partner, we are currently producing prototypes, spare parts, and small series components, and are working to further improve flame resistance to meet additional certification specifications,” explained Hammes.
BASF introduced Ultrasint Grey PA6 LM X085 at AMUG this spring and now is followed by another product on show at formnext. Ultrasint PA6 Black LM X085 is based on polyamide 6, and can be processed at 175-185 degrees Celsius therefore making it suitable for most current SLS machines.

B3DPS adds polypropylene to its 3D printing portfolio
Through the acquisition of Advanc3D Materials GmbH in July 2018, B3DPS has expanded its range with numerous materials for use on laser sinter machines, including polyamide Adsint PA12, Adsint PA11, Adsint PA11CF and Adsint TPU flex 90.
Ultrasint PP is a special highlight. This polypropylene-based product exhibits outstanding mechanical properties and is frequently used in standard industrial production as it offers a good balance between price and performance. Ultrasint PP is distinguished by excellent plasticity, low moisture uptake, and resistance to liquids and gases. Prototypes and small batches can now be produced from the same material as used for traditional serial production. Post treatments such as thermoforming, sealing, and dyeing can be performed after printing.

• Unique, patented 3D printing process enables production of large-scale components
• First direct investment by BASF Venture Capital in a company in China

BASF Venture Capital GmbH is investing in Prismlab, a leading provider of 3D printing processes and 3D printers, headquartered in Shanghai, China. Prismlab has developed a patented printing process that is characterized by a very high printing speed, high level of precision and lower printing costs. BASF’s venture investment will enable Prismlab to further accelerate its product development and innovation while strengthening its market reach to the global market.

“This is our first direct investment in a Chinese company,” said Markus Solibieda, Managing Director of BASF Venture Capital GmbH. “The trailblazing technology from Prismlab allows large and stable components, such as medical braces and anatomical models, to be 3D printed for the first time. This investment supports BASF’s strategy of actively advancing our technologies and expanding our product offering in the 3D printing sector.”

“China is transforming from a manufacturing-driven to an innovation-driven economy. This investment in Prismlab reflects our commitment to further expanding our innovation capabilities in China, and BASF Venture Capital plays an important role in helping us identifying potential partners that lead us to success,” said Dr. Zheng Daqing, BASF’s Senior Vice President, Business and Market Development Greater China.

“The 3D printing technology must continue to evolve before it is set to change the world. At Prismlab, we aim to spearhead and accelerate that change by providing solutions through specialized customization. The investment allows us to stay laser-focused on our R&D capability, a key factor to achieve that goal,” said Mr. Hou Feng, Founder and Chairman of Prismlab.

Prismlab has developed a patented 3D printing process, “Pixel Resolution Enhanced Technology”, based on stereolithography (SLA). SLA allows comparatively large components to be produced using light-curing resins. Prismlab’s technology increases the printing resolution without compromising printing speed. In order to increase the amount of energy brought into a pixel, Prismlab’s technology divides each pixel in the resin into several small sections, which can be cured individually by exposure to LCD light. This makes the energy input into each pixel significantly higher than similar processes that expose each pixel to light once. This allows comparatively large and stable components or numerous parts to be printed in the same production step. With the use of LCD light, it also reduces process costs. This advantage opens opportunities in the footwear and furniture industry.

Along with this patented process, Prismlab also markets 3D printers and other related services. The Prismlab technology can be used in various key customer applications, including invisible braces, and anatomical models for medical, and education and training purposes.

SLA uses a laser for layer-by-layer curing of a photopolymer solution to shape the required workpiece. SLA and LCD based printing processes determinate the size, stability, and usability of the components to be produced as they are limited by the size of the light spot and the intensity of the light.

The Aachen Center for Integrative Lightweight Production (AZL) of RWTH Aachen University is installing a new ENGEL injection molding system in its technical center. Engel Deutschland GmbH – in cooperation with the ENGEL Centre for Lightweight Composite Technologies in Austria – will install the 2-component injection molding system with turning plate and 17,000 kN clamping force in 2019. This machine setup is the basis for further developments of efficient inline-combination technologies using different kinds of polymer performance materials.

The ENGEL injection molding system will enable innovative combinations of already established fiber-reinforced plastics (FRP) processes and the development of new individual processes. The focus is on increasing resource efficiency in lightweight production. With the new equipment, new research and development initiatives can explore the more efficient use of materials, which are eventually the key to the mass production of lightweight components. The research will address multi-material systems, continuous processes, process chains as well as self-optimizing processes.

Dr.-Ing. Michael Emonts, Managing Director of the Aachen Center for Integrative Lightweight Production (AZL) is looking forward to realizing new innovative lightweight production process with the new injection molding system: “This new injection molding system offers us as specialists for lightweight production technology in cooperation with the injection molding experts of the Institute of Plastics Processing – the IKV – the opportunity to establish hybrid processes for industrial lightweight applications. The system will expand our existing machinery in the AZL Technical Center and will be available as an important platform for lightweight production research at RWTH Aachen University.”

Being a Partner of the AZL, ENGEL has already been working closely with the AZL for many years as a Partner Company of the AZL Partner Network. Dr. Stefan Engleder, CEO of the ENGEL Group, emphasizes the importance of close collaboration with technical universities and especially with the AZL: “The AZL provides great conditions for industry-related research activities in the field of lightweight composites as it is characterized by a strong interdisciplinary approach. It benefits from the great infrastructure and the collaboration with well-known institutes of the RTWH Aachen University. ENGEL is looking forward to working together with the AZL on developing efficient lightweight composite mass production processes.”

In addition to the numerous composite and lightweight equipment at the RWTH Aachen Campus, the AZL Technical Center comprises large-scale equipment for the development of processes for lightweight production, such as a composite press from Schuler Pressen GmbH with 18,000 kN clamping force.

Wolford is recognized for high quality Skin wear and is a favorite among fashion influencers. Wolford realizes that when it comes to luxury, consumers expect brands to be responsible. In response, Wolford understands sustainable luxury is a new brand ingredient and are dedicated to expanding their collections each season and infusing responsible materials.

This July at Interfiliere, gain a sneak peek into the launch of Wolford’s Aurora collection of leggings and pullovers that are Cradle to Cradle gold certified, first one in the world! The new styles created use premium stretch yarn belonging to the ROICA™ Eco-Smart family, the world’s first yarn awarded Cradle2Cradle Material Health Gold Level Certificate and Hohenstein Environment compatibility certification, which provides evidence of compliance and offers confidence as a responsible choice. In addition to premium stretch yarn from ROICA™ Eco-Smart family, the Aurora pieces are made using two other responsible fibers, Lenzing Modal® a cellulosic fiber derived from sustainable forestry, and infinito® by Lauffenmühle, a specially modified oil based biodegradable polymer.’

Instead of using new materials, Wolford’s new collection is developed to return the ingredients back to the cycle, they simply borrow them for the lifetime of the product, which supports responsible product ingredient sourcing. At the end of the Aurora collection product lifecycle, Wolford will return them to an industrial composting station to naturally breakdown without releasing harmful environmental substances. Wolford is committed to becoming part of the solution and activating change as they continue to explore responsible material innovations.

Be sure to attend Première Vision NY Smart Talk on July 17th, 2018 at 2:00p to meet to Wolford’s own Andreas Roehrich, Director, Product Develoment & Innovation to discuss technology and Wolford’s quest to become a responsible luxury brand.
 

• Additives, pigments and masterbatches for transportation, packaging, textiles & fibers
• Support to “future-proof” medical applications
• Contributing towards more sustainable engineering plastics

Clariant, a world leader in specialty chemicals, turns the spotlight on its increasing on-the-ground support and innovation focus for North America’s four key plastics application segments at NPE 2018 Booth S18155.

Clariant is pushing forward with plans for growth in the region by advancing R&D competencies, and increasing its manufacturing footprint and technical capabilities across its 50+ sites, 3 R&D and 6 technical innovation centers. Clariant’s innovations for the plastics industry include advanced additives, masterbatches and pigments which support the packaging sector in engaging consumers via differentiated, convenient solutions. At NPE, it will also highlight solutions for enhancing and protecting healthcare products, as well as its contribution to stronger and colorful textiles and fibers for everything from e-mobility to industrial applications.

Deepak Parikh, president of region North America, Clariant comments: “Clariant’s product innovation for the US and wider North American plastics industry embraces the region’s fastest growing end-use areas of automotive and construction. It also addresses the impact of trends driven by changing consumer lifestyle preferences and market regulations on other important segments such as packaging and healthcare.”

Transportation
Clariant brings color and protection to support the increasing use of engineering plastics and high temperture resins in automotive interiors, exteriors and under-the-hood. Halogen-free Exolit® OP 1400 provides outstanding flame retardancy to polyamide parts, enhances safety with UL 94 V0 performance down to 0.4 mm and enables the molding of complex parts with no mold deposits and blooming. Exolit OP 1400 has been awarded the Clariant EcoTain®label for outstanding sustainability and performance. At the same time, Clariant offers low-halogen controlled high-performance PV Fast® pigmentswith excellent migration and weather fastness properties to meet the high requirements of today’s transportation and automotive industry. Easy processing Renol® compounds and masterbatches for engineering and high temperature resins provide heat and light stability, and flame retardancy, while maintaining critical flow properties in parts like SMT connectors. Importantly, they are available as small lots which enables customers to purchase only what they require and contribute to a reduction in their carbon footprint.

Packaging
As US packaging manufacturers explore more consumer-friendly, lighterweight and appealing solutions, Clariant is on hand to support their functionality, sustainability-related and color desires. Clariant Pigments has an innovative cooperation with Konica Minolta and matchmycolor to enable fast, precise and efficient color matching of HDPE products, using select organic PV Fast and Graphtol® pigments that comply with FDA regulations. The ColorWorks®center in Chicago is dedicated to US brand managers and designers with teams of color design experts to create color formulations faster than ever before for bottles, caps, closures and films.

According to market reports, plastic pouches are gaining share from traditional pack types in packaged food and are mainstream in home care. To support smoother and more environmentally-compatible processing especially for film applications, Clariant offers an FDA-compliant, vegetable-based powder amide wax, Licolub® FA 1, which acts as a slip and anti-block agent. It is suitable for polyolefins and PVC.

Textiles & Fiber
At NPE 2018, Clariant puts the focus on strong and colorful textiles, carpets and industrial fibers. New AddWorks® TFB 117 offers a number of benefits to help stabilize and smoothen fiber production processes, protect color, and improve heat stability and mechanical properties of fibers. AddWorks TFB 117 ensures smooth spinnability with less filaments breakage, even at low processing temperatures and at high speed spinning up to 5,500 m/min. Clariant also offers a broad range of colorants for polypropylene, polyester, polyamide and acrylic fibers, featuring migration fastness, chemical stability, light- and weather-fastness.

Healthcare
Clariant supports risk control and regulatory compliance for medical polymer and pharmaceutical packaging solutions. Its Mevopur® color and performance masterbatches and compounds include a USP Class 6 line of compliant products and multiple global ISO, 87, 88, and 661.1 certifications ahead of the market deadline. Clariant also offers selected FDA-compliant organic pigments and polymer soluble dyes that meet purity migration fastness as well as toxicological properties for medical devices and pharmaceutical packaging.

As a global leader in the chemical industry, SABIC will present its full Fluids product portfolio at IESD, the leading surfactants and detergents show for China and Asia, in Shanghai, April 24 -26.

SABIC Specialties provides high value, technologically advanced chemical derivatives for use in a wide range of applications. Employed as surfactants, detergents, emulsifiers, emollients and thickeners for consumer products ranging from cosmetic and personal care, home care and pharmaceuticals, to industrial products like textiles, paints and coatings. Additionally, these products find their way into industrial uses such as specialty lubricants, crop protection, and oil & gas applications.

A key aspect of SABIC Specialties Fluids business - not only within China, but for the broader Asia region - is its ability to deliver the added value only a dedicated, local team with stocked inventory and flexible packaging options, can supply. In addition to local team know-how and readiness, SABIC’s Chinese operations are supported by a global team with significant expertise and production facilities around the globe. Focused on creating the right balance of properties and performance to meet the ever-increasing needs of consumers and industry, SABIC works closely with specifiers and formulators to develop vital constituents for game changing products.

At IESD SABIC will be introducing SAPEG 400 PH, its new pharma grade PEG400, conforming to USP-NF monograph and manufactured to EXCiPACT Good Manufacturing Practices of pharmaceutical excipients. It is used in liquid preparations as a viscosity modifier, in ointment and suppository bases as a melting point regulator, moisturizer and lubricant and in the preservation of pathological specimens. It can be used in the manufacturing of creams, lotions, toothpastes and in soaps as a humectant.

“SABIC Specialties has long been a pioneer in developing innovative chemicals and polymers to support the production of the latest and most advanced domestic and industrial applications”, said Eric Jaarda, Senior Manager, Fluids Marketing Global at SABIC Specialties. “We are proud to present some of our most advanced and versatile offerings at this year’s IESD in Shanghai and to demonstrate our commitment to the Chinese and broader Asian market.”

In addition to SAPEG 400 PH, SABIC will also be showcasing the following:

• Natural Fatty Alcohol (C12-14) Ethoxylates (SABIC® SABICOL L2/L3/L7/L9) - both colorless and odourless, this is a range of versatile non-ionic surfactants. Supplied as liquids or as a paste, they are efficient water in oil emulsifiers and readily biodegradable.
• Synthetic Alcohol (Isodecyl and Isotridecyl Alcohol) Ethoxylates (SABIC® SABICOL DA5/DA7/TA5/TA6/TA7/TA8/TA9) - a series of fast wetting, low odor and biodegradable non-ionic surfactants.
• Castor Oil Ethoxylates (SABIC® SABICOL EL30/40/55) - supplied in liquid form or as a paste, they are completely miscible in water and many organic solvents. Non-toxic and non-irritant, they are employed as emulsifiers in both domestic and industrial applications.
• Polyethyleneglycols (SAPEG200/300/400/600) - consisting of a distribution of polymers of varying molecular weights, these are colorless and odorless liquids. Non-toxic and non-irritant, they are used as humectants, lubricants, solvents and viscosity modifiers in a range of applications.

• JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

“JEC Group supports innovation. In 1998, it created the first award dedicated to composites, as a way to promote and reward the sector’s champions. Thanks to the work of JEC Group’s teams, the program has become an international benchmark. Each year, we receive more than a hundred applications from all over the world. Selection is now based on criteria like the level of involvement of the innovation’s partners in the value chain, the technical nature of the innovation, or its commercial applications,” explains JEC Group President & CEO Frédérique Mutel.
A new feature this year is that the jury revealed the winners during the ceremony, and the public could choose their favorite innovation before, during, and after the ceremony. So there is still time to vote! Votes are opened until Thursday March 8th, 5pm http://innovationawards.jec-world.events
Did you miss the ceremony?

11 AWARD WINNERS:
AEROSPACE APPLICATION
Winner:
AeroComposit, JSC (Russia) and its partner Solvay (United Kingdom)

• Infusion technology for an aircraft wing

The use of infusion technology to manufacture primary structural components for an aircraft wing. The technology makes it possible to create extra-long, integrated composite structures with complex aerodynamic shapes.

AEROSPACE PROCESS 
2 tied winners!
Winner: Airbus (Germany) and its partners, BMW Group (Germany), Technical University of Munich (TUM) (Germany), Neue Materialien Bayreuth GmbH (Germany), Werkzeugbau Siegfried Hofmann GmbH (Germany), BASF SE (Germany), Foldcore GmbH (Germany), Neenah Filtration (Germany) and SGL Carbon GmbH (Germany)

• Complex structural applications for MAI sandwich technology

Cost-effective production of a complex 2.5D structure made of thermoplastic composite sandwich, with very short cycle times: under 5 minutes for aerospace materials and 2.5 minutes for automotive materials.

Winner: M. Torres Diseños Industriales SAU (Spain)
Moldless process to manufacture one-piece parts
A new manufacturing process for oversized one-piece reinforced composite structures, without requiring the use of complete molds.

AUTOMOTIVE APPLICATION
Winner: Ford Werke GmbH (Germany) and its partners, Gestamp (United Kingdom), GRM Consulting (United Kingdom) and University of Warwick (United Kingdom)

• Lightweight composite automotive suspension part

Structural suspension part made of lightweight composite, using a brand-new patented process for prepreg/SMC/steel overmolding that was designed using a new computer-aided engineering (CAE) technology.

AUTOMOTIVE PROCESS
Winner: Audi AG (Germany) and its partners, Voith Composites GmbH & Co. KG (Germany), Dow Automotive (Switzerland), and Zoltek Corp. (United States)

• Series production of a rear panel module made of carbon composite

For the first time, the potential of carbon fiber reinforced plastics (CFRP) is used to full advantage in series production with a new rear panel module and cost-effective production technologies.

CONSTRUCTION & INFRASTRUCTURE
Winner: Komatsu Seiren Co., Ltd. (Japan) and its partners, Kanazawa Institute of Technology (Japan) and Nagase ChemteX Corporation (Japan)

• Cabkoma cable made of CFRTP

Komatsu Seiren has developed a cable made of molded carbon fiber reinforced thermoplastic (CFRTP), using a very cost-effective process that consists in polymerizing a thermoplastic epoxy resin in situ.

MARINE
Winner: Uljanik JSC (Croatia)

• Composite cargo decks for a vehicle carrier

On the SIEM Cicero, a vehicle carrier with a capacity of 7,000 vehicles, glass-fiber reinforced composites are used for a number of the structures for the cargo decks, thereby considerably reducing the ship’s weight, fuel consumption and CO2 emissions.

RAILWAY
Winner: ELG Carbon Fibre Ltd. (United Kingdom) and its partners, Alstom Transport (United Kingdom), Magma Structures (United Kingdom), the University of Birmingham (United Kingdom), and the University of Huddersfield (United Kingdom)

• A bogie frame made of optimized lightweight carbon fiber

This project has developed the very first carbon-fiber bogie frame that uses a recycled material, making it possible to overcome the obstacles to a commercial adoption of this type of structure.

SPORTS & LEISURE
Winner: BMW Group (Germany) and its partners EDAG Engineering GmbH (Germany), KraussMaffei Technologies GmbH (Germany), Chr. Karl Siebenwurst GmbH & Co. KG (Germany), TUM-LCC (Germany), Automation W + R GmbH (Germany), and FHG-IGCV (Germany)

• A modular construction system for the rear swing arm suspension of a motorcycle

A modular system to produce a complex-shape swing arm suspension reinforced with carbon fiber. The system can adjust the mechanical properties on a case-by-case basis, for a competitive cost and weight compared to metal solutions.

SMART CITIES
Winner: MC Materiales Compuestos (Argentina) and its partners, Plaquimet (Argentina), Purcom (Brazil), IS Groupe - Composite Integrity (France), and G12 Innovation (Brazil)

• The Wet Core Pod composite housing module

The Wet Core Pod is a composite housing module with an industrialization potential that can facilitate the most complex, costly and difficult step in a construction project.

SUSTAINABLE DEVELOPMENT
Winner: Cetim-Cermat (France) and its partner, CETIM (France)

• “3-in-1” line for producing recycled composites

A modular line that uses an innovative thermomechanical process to make large panels from recycled composites or plastics. The panels are then thermoformed into parts.
 

• Unique ROICA™ Premium Stretch Innovations for the Active Wardrobe Debuts @ ISPO Brandnew Village
• Hall B4, Booth No. B4.430 BN 02 Munich 28th-31th January 2018

Come and enjoy a real dedication to Responsible Innovation and Wellbeing in our new ROICA™  booth experience for Fabric Innovation inspiring the ROICA™ Active Wardrobe and the international ROICA™ Closet. Together, they will guide you to new hi-tech performance solutions in our partners unique stretch ideas, designed to meet both contemporary business and astute consumer desires. These latest ROICA™ innovations will be presented within the special ISPO BrandNew arena, a new high visibility concept of creativity revealed inside ISPO that truly matches the core DNA and values of the ROICA™ premium stretch brand.

ROICA™ will present The Modern Wardrobe concept in 3 distinct dimensions.

Together they bring to life our new stretch solutions that fit the supply chain for our target consumer confirming a clear brand identity that redefines performance creativity.

1 ROICA™ ACTIVE WARDROBE: Come and see leading commercial fashion ranges ready for the Summer 2018, that include the ROICA™ Eco Smart family and the ROICA™ Feel Good family of unique premium stretch yarn solutions.

2 ROICA™ INNOVATION: Here you can find the latest textile performance innovations from our partner mills to inspire even more brand creativity.

The ROICA™ Fabric Gallery is a rich and varied fabric offer that focuses on:
•    The revolutionary ROICA™ Eco Smart family of sustainably designed stretch yarns. These yarns are either GRS certified, or have the Cradle-to-Cradle Innovation Institute GOLD LEVEL certificate for material health, plus the Hohenstein Environment Certificate, where at its end-of-life, it smartly breaks down releasing less harmful materials. These unique commercialized solutions suites for intimates, athleisure, sportswear, and more.
•    The unique ROICA™ Feel Good family promises a new level of performance with ‘feel-good comfort’ and freshness. The ROICA™ CF yarn delivers an odor-neutralizing durable function in wash and wear because its active ingredient is locked inside the yarn and only requires a modest % to perform in most fabric structures.
•    A new ROICA™ Stretch Energy™ is a truly verified heat-generating system that combines a customised ROICA™ polymer with special fabric structures where a stretch and recovery action produces real warmth, maintaining support during exercise.

3 ROICA™ CLOSET: In this zone you can explore new ROICA™ garment designs from our experimental laboratory, using innovative Japanese fabric creativity.

Also at our ROICA™ booth, you will be able to explore sister brand Cupro innovations, designed responsibly for a new, luxe view of athleisure sportswear.

Today, the ROICA™ premium stretch brand sets the highest quality standards that are uniquely specialized and certificated perfectly focused on responsible performance for the active sportswear, swimwear and athliesure wear categories, making it the ‘smart-fit’ for the ISPO BrandNew Village presentation.

• INVISTA to showcase ‘Innovative Attitude’ at Intertextile Shanghai Apparel Fabrics
• Innovative INVISTA products, findings from a new textile industry IP protection survey, in-depth consumer insights and fashion trends will be revealed

INVISTA, one of the world’s largest integrated producers of polymers and fibres, will showcase the innovative attitudes enabling it to maintain a leading position in the textile industry at the upcoming Rendez-Vous 2017 at October’s Intertextile Shanghai Apparel Fabrics – the world’s most influential apparel event. INVISTA Rendez-Vous will showcase innovative INVISTA products, offer consumer insights and reveal the results of a textile industry IP protection survey.

INVISTA Rendez-Vous 2017 will be held at Intertextile Shanghai Apparel Fabrics 11 – 13 October at the National Exhibition and Convention Center in Shanghai, with INVISTA occupying two booths in hall 5.2 E49 and hall 7.2 E55. 

As a global authoritative trade show in textile industry, Intertextile Shanghai Apparel Fabrics has been a platform for INVISTA to communicate with players across the value chain for 23 years. This year’s event will be no exception. The rich and vivid content delivered at the show will focus on INVISTA’s Innovative Attitude to consumers, partners as well as the whole industry.

To build a healthy and sustainable marketing environment, INVISTA cooperated with a number of media organisations to conduct a survey on IP protection in the textile industry. The results will be revealed during a seminar entitled ‘Innovation and IP: An Avenue for Sustainable Textile Industry Development’, which will be held on 11 October, 2:45 – 3:45pm in the Textile Dialogue area in hall 5.2. Representatives from textile industry associations, legal firms and INVISTA will share the findings and offer insights during what will undoubtedly be one of the highlights of INVISTA Rendez-Vous 2017.

The main pavilion of the show will be located in the International Hall (hall 5.2), where three of INVISTA’s most innovative products will be on show. Visitors will experience the latest possibilities offered by LYCRA® MOVESTM BRA, LYCRA® MOVESTM LEGGINGS and LYCRA® MOVESTM HOSIERY.

LYCRA® MOVESTM BRA

According to consumer research conducted in 2016, bra products in China’s domestic market don’t match consumer demands in a host of critical areas, including support, comfort and aesthetic design. To address these concerns, streamline the industry and consolidate its leadership, INVISTA is launching LYCRA® lastingFIT technology for bra wings. In addition, INVISTA’s cutting-edge technology can contribute to meeting specific quality standards in bra wing fabrics, enabling Chinese consumers to experience higher levels of comfort and the appropriate support they expect from a bra in different occasions.

LYCRA® MOVESTM LEGGINGS

INVISTA’s longstanding commitment to legging fabrics will also be on display at Rendez-Vous. INVISTA’s LYCRA® MOVESTM LEGGINGS has already spawned LYCRA® SPORT Power-Comfort-Energy (PCE™) index-certified fabrics, which are now commercially available.

The revolutionary fabrics present excellent recovery performance for LYCRA® SPORT legging products. They also offer the industry an opportunity to develop a number of targeted segment markets – from compression and medium compress to light compression leggings.

LYCRA® MOVESTM HOSIERY

LYCRA® MOVESTM HOSIERY is all about fabric technology innovation. Due to excellent properties, such as anti-laddering, fit and durability as well as comfortable waistbands, INVISTA’s LYCRA® FUSIONTM technology has already been widely adopted in China’s hosiery sector.

A Packed Pavilion

At the LYCRA® MOVESTM Denim pavilion in the Beyond Denim hall (7.2), visitors won’t just see the innovative denim products offered by INVISTA; they will also learn about three themes highlighted through consumer insights – fit, shape and embracing heat & cold. There will also be a special session outlining the latest woven bottom trends, hosted by INVISTA experts.

Introduced commercially in 2010, LYCRA® dualFX® dual core yarn technology provides denim with super stretch and super recovery that fits all day and every day. It effectively prevents seam slippage and uneven fabric surfaces, keeping denim looking good, feeling comfortable and fitting, which in turn creates new denim fabric applications and fashion trends in the China market.

Last But Not Least

An interactive program, that includes visitors uploading pictures they take at the INVISTA booth to the official INVISTA WeChat account, will give every visitor a chance to win a special INVISTA gift. Visit INVISTA at hall 5.2 E49 and hall 7.2 E55 from 11 – 13 October at Intertextile Shanghai Apparel Fabrics 2017.