From the Sector

• Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
• All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
• Global legislators aim at limiting plastic waste persisting in the environment for centuries
• EU Single-Use Plastics Directive partly regulates usage of plastic products
• Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

The biodegradability of cellulosic products and the synthetic fiber polyester was tested in fresh water at OWS according to valid international standards, e.g. ISO 14851. At the end of the trial period, LENZING™ wood-based cellulosic fibers, cotton and paper pulp were shown to be fully biodegradable in fresh water in contrast to synthetic polyester fibers. The fact that synthetic materials are not biodegradable leads to major problems in wastewater treatment plants and potentially marine litter. In turn, this not only harms fish and birds living in and close to the oceans but also all marine organisms and us humans.

“The Lenzing Group operates a truly circular business model based on the renewable raw material wood to produce biodegradable fibers returning to nature after use. This complete cycle comprises the starting point of the core value of sustainability embedded in our company strategy sCore TEN and is the ‘raison d’etre’ of our company”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “In living up to this positioning, we not only enhance the business of our suppliers, customers and partners along the value chain but also improve the state of the entire textile and nonwovens industries.”

Both the textile and nonwovens industries face huge challenges with respect to littering. If current trends continue, the oceans could contain more plastic than fish by 2050. Therefore, legislative bodies worldwide can no longer ignore the issue and have moved towards plastics legislation aimed at limiting the vast amount of waste. In response, European lawmakers issued the Single-Use Plastics Directive currently being transposed into national legislation in the EU member states.

Conventional wet wipes and hygiene products mostly contain plastic and were thus identified as one of the product categories to be singled out. Less polluting alternatives are generally encouraged by NGOs and legislators, e.g. products made of biodegradable wood-based cellulosic fibers. Plastic waste including microplastic can persist in the environment for centuries. In contrast, biodegradable materials are the best alternative to single-use plastics because they fully convert back to nature by definition and thus do not require recycling.

• Borealis’ EverMinds™ ambition moves industry one step closer to plastics circularity thanks to new recycling technology and improved recyclate
• Borealis also announces significant material improvements to existing Purpolen® recyclate materials

Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces the introduction of a new plastics recycling technology, Borcycle™. This evolving technology will be used to produce high-quality compounds made of recycled polyolefins (rPO) such as the newly-launched Borcycle™ MF1981SY, an rPO with over 80% recycled content intended for use in visible appliance parts. Borealis also announces a series of significant material improvements to existing recyclates in the established Purpolen™ brand portfolio. These market launches and product improvements are important technology advancements and thus accelerate the transformation to a circular economy of plastics. Borealis and its wholly-owned subsidiary, mtm plastics, will showcase the new Borcycle technology and recyclate innovations at the K 2019 in October.

Borealis is leading the industry by applying its Visioneering Philosophy™ to the development and implementation of novel polyolefins-based solutions that enable plastics reuse, recycling, and recovery, and by designing for circularity. These wide-ranging activities are gathered under the symbolic roof of EverMinds™, the Borealis platform dedicated to promoting a more circular mind-set in the industry. By capitalising on its profound expertise in virgin polyolefins and collaborating with value chain partners, Borealis keeps discovering new opportunities for business growth within the circular economy.

Advancing technology to bring about polyolefin circularity

The new technology, Borcycle, transforms polyolefin-based waste streams into recyclate material such as pellets. As a transformative technology, it complements the existing Borealis virgin polyolefins portfolio with a range of pioneering, circular solutions. It unites state-of-the-art technology with the profound Borealis polymer expertise gained over decades.

As a scalable and modular technology, Borcycle has been developed to meet growing market demand for high-quality recyclate. Leading appliance brand owners, for one, have pledged to increase the amount of recycled plastics in their goods. Yet until recently, producers have not been able to rely on a consistent supply of high-quality recyclate. The Borcycle technology will help address this challenge. Compounds made using the Borcycle technology deliver high performance, add value and offer versatility. Producers and brand owners in a range of industries will profit from the availability of high-quality recyclate that helps them meet environmental and regulatory challenges.

“Advancing technology is crucial if our aim is to implement value-creating solutions in the circular sphere,” claims Maurits van Tol, Borealis Senior Vice President, Innovation, Technology & Circular Economy Solutions. “‘Building tomorrow together’ means innovating, collaborating, focussing on the customer, and above all – taking action. The launch of our new recycling technology Borcycle is tangible proof of our commitment to achieving plastics circularity.”

New and improved recyclate for high-end applications

Borcycle™ MF1981SY is the first of several upcoming launches of rPO solutions made under the umbrella of the Borcycle technology. Borcycle™ MF1981SY will be available to Borealis customers in Europe. The compound is an exciting addition to the rPO portfolio because it is a 10% talc-filled compound that contains over 80% recycled material. It offers an ideal balance between stiffness and impact. The compound is especially suited for use in visible black parts, for example in small appliances.

Like its relatives in the mtm plastics family of recyclate materials, Borcycle™ MF1981SY is a truly sustainable offering. Recyclates from mtm save approximately 30% of CO2 emissions compared to virgin materials.

A number of significant improvements have been made to existing recyclate grades in the Purpolen portfolio.

“Mechanical recycling is presently a most eco-efficient method to implement the principles of the circular economy,” explains Guenter Stephan, Head of Mechanical Recycling, Borealis Circular Economy Solutions. “Borealis and mtm plastics are leveraging their respective areas of expertise to make significant progress in achieving polyolefin circularity by upscaling recycling output and ensuring the reliable supply of high-quality plastics recyclate for European producers, in particular.”

• Clean Technology. Smart Factory.

Remscheid – Oerlikon invites all visitors to this year's ITMA in Barcelona on a journey into the future of manmade fiber production. From 20 to 26 June 2019, the world market leader will show all its guests its vision of a sustainable and automated manmade fiber production in a virtual 4D showroom at its 1,000 m² stand in Hall 7, A101: "Clean Technology. Smart Factory." is the motto of the future. And this is only a stone's throw away from reality at the stand. Because today Oerlikon is presenting four world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

The challenges for the manmade fiber industry are manifold and Oerlikon shows its customers solutions:

1. Choosing the right business model
Price pressure on fiber and yarn manufacturers is growing due to global market consolidation. Here it is important to position oneself correctly. Are you producing polyester, nylon or polypropylene for the niche market and skimming off good margins with innovative products and ingenious material properties, or are you looking for business success through economies of scale in the volume market such as the constantly growing apparel sector? Oerlikon has the right answers for both business models. And the most important thing: the market leader supplies all solutions from a single source. See for yourself at the world premieres of the machine and system concepts of WINGS FDY PA6, BCF S8 Tricolor and the revolutionary eAFK Evo texturing machine.

2. Finding alternatives for good personnel
Finding good operators in the manmade fiber industry is becoming increasingly difficult, even in emerging industrial nations such as China, India and Turkey. The solution is obvious. What, for example, the automotive industry achieved years ago with the 3rd Industrial Revolution is now also taking its course in the textile industry. And at the same time it is even shifting up a gear. In the next step, automation in combination with digitization will lead to new, sustainable production. Oerlikon will be showing how automation and digitization interact at ITMA. Self-learning machines and systems, artificial intelligence (AI), remote services and edge computing are just a few of the key words in the digital half of the new Oerlikon Manmade Fibers DNA.

3. Guarantee quality and traceability
The qualities of the fibers and yarns must meet the highest demands and their production must be traceable throughout the textile value chain. This no longer only plays an important role in the automotive industry, where safety is of paramount importance. Other branches of industry that use fibers, yarns and nonwovens also want to know where the raw materials they produce for consumer articles come from. Legal regulations are demanding this more and more frequently. Oerlikon offers optimal solutions with its DIN ISO certified manufacturing processes. More than half of the world's manmade fiber producers are convinced every day that the qualities produced on Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven equipment are right – and all visitors to ITMA can do the same on site.

4. Efficient and sustainable production
In the future, the materials produced from manmade fibers must become part of a further improved global recycling economy. The recycling of polyester – with over 80% market share the most frequently used manmade fiber in the world – has not only been on the agenda since today. Oerlikon already has solutions at hand: from PET bottles to fibers and filaments, to textiles and carpets. ITMA is the next step. With the VacuFil® Oerlikon in cooperation with the subsidiary company BBEngineering presents the world premiere No. 4 – a recycling solution within a running polyester production with a waste-free approach.

Vision becomes reality
The Oerlikon Manmade Fibers segment thus demonstrates what the ITMA in Barcelona promises as the world's leading trade fair for textile machinery and plant construction: "Innovating the world of textiles – sourcing for a sustainable future". In Hall 7, A101, this is already reality.

• PrimaLoft® Bio™ Performance Fabric – der erste Funktionsstoff aus 100% recycelten, biologisch abbaubaren Fasern

LATHAM, NY - MÜNCHEN: PrimaLoft, Inc., weltweit führendes Unternehmen für innovative Materialtechnologien, hat sein Portfolio an biologisch abbaubaren* Technologien erweitert. Mit der Einführung von PrimaLoft® Bio™ Performance Fabric, dem ersten zu 100% recycelten und biologisch abbaubaren synthetischen Funktionsstoff ergänzt das Unternehmen die kürzlich vorgestellte PrimaLoft® Bio™ Insulation, die ebenfalls die erste Technologie ihrer Art ist. Grundlage beider Innovationen ist eine technisch weiter entwickelte Fasertechnologie, die einen stark beschleunigten biologischen Abbau unter bestimmten Umweltbedingungen ermöglicht und so ein potentiell wichtiger Faktor bei der Problematik von Mikroplastik in den Meeren werden könnte. Sowohl PrimaLoft® Bio™ Performance Fabric als auch PrimaLoft® Bio™ Insulation sollen ab Herbst 2020 im Handel verfügbar sein.

„Seit Beginn der Entwicklung unserer biologisch abbaubaren Materialien waren Funktionsstoffe ein wichtiger Bestandteil für uns. Dank dieses Durchbruchs können Kleidungstücke ab sofort komplett den Weg zurück in die Natur finden“, sagte Mike Joyce, Präsident und CEO von PrimaLoft. „Da wir bei der Leistung keine Abstriche machen, mussten wir sicherstellen, dass unsere biologisch abbaubaren Fasern dem Herstellungsprozess von Hochleistungs-Funktionsstoffen standhalten und gleichzeitig ihre Fähigkeit zum biologischen Abbau behalten.  Diese Entwicklung öffnet uns neue Horizonte und wir wollen damit Maßstäbe setzen, um die Umweltauswirkungen der Textilindustrie erheblich zu verringern.“

PrimaLoft® Bio™-Fasern bestehen zu 100% aus Recyclingfasern, die sich unter bestimmten Gegebenheiten wie sie in einer Mülldeponie oder im Meerwasser vorherrschen, biologisch abbauen. PrimaLoft hat diese Fasern weiterentwickelt, um sie attraktiver für dort natürlich vorkommende Mikroben zu machen. Diese Mikroben verdauen die Fasern schneller und sorgen dafür, dass der Funktionsstoff zersetzt wird und am Ende lediglich die natürlichen Elemente Wasser, Methan, CO2 und Biomasse zurückbleiben. Die neue Technologie wird dabei  helfen, das wachsende Problem von Mikroplastik in den Ozeanen zu verringern – ein bedeutendes Thema für die Textilindustrie und andere Industriezweige. Laut Schätzungen der Ellen Macarthur Foundation landen jährlich rund eine halbe Million Tonnen Mikrofasern beim Waschen von Textilien auf Kunststoffbasis wie Polyester, Nylon oder Acryl im Meer. PrimaLoft® Bio™-Fasern werden nur abgebaut, wenn sie in Kontakt mit natürlich vorkommenden Mikroben auf Mülldeponien oder im Meer kommen. Dadurch bleiben die Fasern während der gesamten Produktlebenszeit des Kleidungsstücks gewohnt dauerhaft strapazierfähig.

Spezifische Testergebnisse zeigen einen biologischen Abbau von 84,1% in 423 Tagen unter ASTM D5511- Bedingungen* (beschleunigte Deponiesimulation) und 55,1% biologischen Abbau in 409 Tagen unter ASTM D6691- Bedingungen** (beschleunigte Meerwassersimulation). „Wir haben Recycling nie als die endgültige Lösung gesehen. Mit PrimaLoft® Bio™ haben wir nicht nur den Code zur biologischen Abbaubarkeit unserer Fasern geknackt, sondern gehen auch den nächsten Schritt in Sachen Nachhaltigkeit“, sagt Joyce. „Mit neuen Fasertechnologien wie dieser versuchen wir unseren negativen Umwelteinfluss so gering wie möglich zu halten. Das ist Teil unserer Selbstverpflichtung, jeden Tag aufs Neue Verantwortung zu übernehmen. “

Bis heute hat PrimaLoft mehr als 90 Millionen Plastikflaschen wiederaufbereitet und daraus Premium- Isolationen hergestellt. Anfang dieses Jahres präsentierte PrimaLoft bereits seine ersten Isolationen aus 100% recyceltem Material. Bis 2020 werden 90% der PrimaLoft-Isolationsprodukte aus mindestens 50% recyceltem Material (PCR = Post Consumer Recycled) bestehen, ohne dabei Einbußen bei der Leistung aufzuweisen.

PrimaLoft plant, mit einem ähnlichen Bekenntnis zu biologisch abbaubaren Technologien in seinem gesamten Produktportfolio, die Branche weiter voranzutreiben. Mehr Informationen zu PrimaLoft Bio gibt es auch hier: http://primaloft.com/primaloftbio

* Standardtestmethode zur Bestimmung des anaeroben biologischen Abbaus von Kunststoffmaterialien unter anaeroben Verdauungsbedingungen mit hohem Feststoffgehalt
** Standardtestmethode zur Bestimmung des aeroben biologischen Abbaus von Kunststoffmaterialien in maritimer Umgebung durch ein definiertes mikrobielles Konsortium oder ein natürliches Meerwasser-Inokulum

From 4 – 6 September, leading innovations and technologies from around the world will feature in the Shanghai New International Expo Centre for Cinte Techtextil China 2018. With a growing technical textile market in China and Asia, big industry names will come to showcase new products. The Belgium, Germany and Taiwan Pavilions are predicted to draw a crowd with their return, while the Czech Republic Pavilion makes its debut appearance.

Fresh innovation from the Taiwan Pavilion
The Taiwan Pavilion lives up to its reputation as one of the leading sources of industry innovation. Ten exhibitors in the Taiwan Pavilion will showcase a variety of innovations ideal for a number of industries. With advances in medical and hygiene product technologies, exhibitors Web-Pro Corporation will offer protective cover-all materials that resist pathogens and micro-organisms and multi-layered PE films for hygiene products, while Kae Hwa Industrial will introduce their developments in materials that protect against viruses. Four Elements Energy Biotechnology will showcase their multi-functional Masterbatch product, a unique FDA-qualified, anti-mildew and transparent plastic additive that repels bacteria.

Other exhibitors to watch out for in the Taiwan Pavilion include Ritex Machinery, who will display their Air Through machinery which can be applied to nonwoven fabrics for hygienic, medical and filtration uses. Everlight Chemical Industrial’s Evereco® adhesives introduce an eco-friendly solution with heat-resistance and other resilient properties. Also offering eco-friendly alternatives is TomLong Techstile and their TPU coated fabrics, ideal for waterproof and inflatable products.

Productivity and efficiency at the German Pavilion
Following high demand in the Chinese market, the German Pavilion returns with around 30 exhibitors, showcasing their expertise in efficiency in textile production. Highlights include Baumüller Nürnberg’s modular concepts and intelligent automations which allow flexible reactions to changeable market requirements. Edelmann Technology brings new high speed winder systems for increased production rates and new concepts for reducing contamination in products. ISRA Surface Vision will present 100% inline optical surface inspection methods for quality control and process optimisations. Another product to watch out for is Kufner’s xShield®, a lightweight, soft textile with 99% shielding efficiency against electromagnetic radiation.

Other big names in the German Pavilion include Autefa Solutions, Brückner Textile Technologies, Dornier Lindauer, IBENA, J.H. Ziegler, Kufner, Perlon and more.

Belgium Pavilion returns along with a Czech Republic debut
Organised by Fedustria (Belgian Textile, Woodworking and Furniture Industry Federation), the Belgium Pavilion will include textile recycling company Belrey Fibres, engineered fabrics by Pennel & Flipo for marine and rescue industries, as well as leading coating specialists Vetex who will feature a variety of functional tapes, and R&D institute Centexbel who carry out research projects across the entire textile and polymer production chain.

The new Czech Republic Pavilion organised by ATOK, the Association of Textile-Clothing–Leather Industry, will showcase three exhibitors who will provide solutions for technical yarn, fabric processing and nonwoven fabrics. These include: GF Machinery, showcasing R&D and production of special machines and lines for glass / basalt yarn and fabric processing; Retex’s nonwoven needle-punched and air laid textiles; and STAP, Europe’s biggest manufacturer of narrow fabrics.

The Cinte Techtextil China fair is recognised by European manufacturers as a gateway to the Asian market. With investment from China boosting the technical textile industry, and more Asian countries than ever developing their technical markets, Cinte Techtextil China 2018 is set to be a hub of business potential.

• JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries. “The ability of JEC Group to gather the whole composites Industry under one roof over 3 days lies in the fact that we always initiate new precursory programs to the service of composites professionals.” says Ms. Frédérique Mutel, JEC Group President & CEO. “This year we initiated new programs, for instance the Composite Challenge allowing 10 PhD students to pitch their thesis in front of the industry, thus facilitating connections between students and industrialists. In the same spirit, we increased in power our Start Up Booster and Innovation Award Programs to accelerate relations between young or innovative companies with investors or established enterprises. We also introduced one new planet called “Make it Real” along with the Aero, Auto and Construction planets. In this planet, we could discover astonishing futuristic products for example the Aeromobil, a flying car that would revolutionize urban transportation in the near future,“ she adds. “We launched our new Book on Natural Fibers: Flax and Hemp. We had strong communications on Composites Environmental Input and Recycling.”

The event was the first event to promote and host the new “French Fab”, a French government initiative to internationally promote the French Industry and Manufacture. Also, JEC World welcomed the French Secretary of State to the Minister of Economy and Finance Ms. Delphine Gény-Stephann, visit that demonstrates the growing role of composites in the industry.

Inspiring Keynotes to foster composites disruption

Dirk Ahlborn,CEO of Hyperloop opened the Startup Booster ceremony by supporting the spirit of ingenuity in the Industry. Dayton Horvath, industry expert and consultant in additive manufacturing presented his vision of how to apply artificial intelligence to composite Materials and Manufacturing. Finally, Yves Rossy, the “jetman” using the latest carbon-fiber wings for flight introduced the JEC Innovation awards ceremony, motivating the audience to pursue their dreams and explaining how composites could made his dreams come true.

The "Public Choice” Awards Winners

A first at the show this year was the introduction of the public votes to elect their favorite projects among two JEC programs promoting innovation. “The goal to create the “public choice awards” was to involve and embark our community to make their innovation loud. Our vision at JEC is to demonstrate and to make understand towards a broader scope the vast range of possibilities that composite materials offer.”
comments Ms. Anne-Manuèle Hébert, Director for JEC World and European Events for JEC Group.

Public Choice Award for Startup  Booster: Inca-Fiber (Germany) with 62.36% of the 2,221 votes
Public Choice Award for JEC Innovation Awards: Infusion technology for an aircraft wing by AeroComposit JSC (Russia) gaining 20.96% of the 4,126 votes.

Bobingen - On the 4th October 2017 a new brand was introduced at Trevira: Trevira SINFINECO®. This label may be carried by all textiles that contain sustainable Trevira products. Sustainable, innovative, high-value and responsible – these are the values the new brand stands for.

As an industrial enterprise, Trevira is conscious of its special responsibility for an intact environment and has long advocated the recycling of valuable raw materials and waste products. Trevira CEO Klaus Holz: “We at Trevira wish to preserve the environment and at the same time work to create value. These are the criteria of our sustainability concept.“

Creation of the new brand is therefore only a logical step, one that enables customers to label their sustainable Trevira products as such. Trevira is known for the high quality of its products. In every way recycled products are as good as the original materials in terms of quality and performance.

Two vital elements in Pre-Consumer Recycling and an important concept in Post-Consumer Recycling form part of the sustainability strategy of Trevira to conserve resources and maintain value. :

In the area of Pre-Consumer Recycling, on the one hand, residual materials resulting from the manufacture of polyester fibres and filaments in Bobingen and Guben, dependent on the manufacturing step, are processed in the agglomeration plant and restored to become serviceable primary material. The recyclates are then fed back to our fibre and filament spinning mills, to be made into new top-quality products.

On the other hand, in fibre production there occurs in the manufacture of tow a small proportion of tow that cannot be used for converting and has to be cut out. Instead of selling this material as waste, it is cut up, pressed into balls and then carded / combed by a partner, resulting in a 1A quality product. The GRS certification (Global Recycled Standard) is requested for this. As with converter tow from new material, the recycled tow is mostly incorporated into polyester wool blends (55 % PET / 45 % wool), which are used primarily in corporate wear and uniforms.

In the area of Post-Consumer Recycling, Trevira offers filament yarns consisting of 100 % recycled PET bottles. Our parent company Indorama manufactures very high quality recycled chips from PET bottles. Since only transparent PET bottles are used in Thailand, the flakes and chips are of a particularly good and very uniform quality. The recycled chips, fibres and filaments from Indorama bear the GRS certificates (Global Recycled Standard) and RCS-NL (Recycled Claim Standard). Trevira processes the regranulate made by Indorama from bottle flakes into filament yarns consisting 100 % of recycled material. The filament yarns are available in titres 167 and 76 dtex normal polyester. Alongside technical applications, they are used in the automotive and apparel sectors. In addition, many promising developments with the recycled material are on their way.