From the Sector

all
Corona
Sustainable
Textile Business
Textile Machinery
Fibres, Yarns & Nonwovens
Technical Textiles
Interior Textiles
Clothing
Companies
Fairs
Trade
Associations
People
Archive
Reset
37 results
(c) NCTO
24.09.2020

NCTO President & CEO Kim Glas Testifies at U.S. International Trade Commission Hearing on Challenges Related to U.S. PPE Production

The U.S. International Trade Commission held a public hearing on September 23-24 as part of its investigation of conditions impacting U.S. industry sectors and supply chains in the production of medical goods related to the COVID-19 pandemic.

National Council of Textile Organizations (NCTO) President & CEO Kim Glas is testifying on panel 5.

“Amid the devastating challenges of responding to COVID-19, NCTO members have been at the forefront of deploying manufacturing resources to address the critical need for personal protective equipment (PPE),” Glas said in testimony prepared for delivery.  “Our members quickly mobilized, proactively retooling production lines and retraining workers to provide U.S.-made PPE to frontline medical workers.”

“Despite these heroic efforts to confront the ongoing crisis, the onshoring of a permanent PPE industry will only materialize if proper government policies are implemented to incentivize the long-term investment needed to sustain PPE production in the United States,” Glas said.

The U.S. International Trade Commission held a public hearing on September 23-24 as part of its investigation of conditions impacting U.S. industry sectors and supply chains in the production of medical goods related to the COVID-19 pandemic.

National Council of Textile Organizations (NCTO) President & CEO Kim Glas is testifying on panel 5.

“Amid the devastating challenges of responding to COVID-19, NCTO members have been at the forefront of deploying manufacturing resources to address the critical need for personal protective equipment (PPE),” Glas said in testimony prepared for delivery.  “Our members quickly mobilized, proactively retooling production lines and retraining workers to provide U.S.-made PPE to frontline medical workers.”

“Despite these heroic efforts to confront the ongoing crisis, the onshoring of a permanent PPE industry will only materialize if proper government policies are implemented to incentivize the long-term investment needed to sustain PPE production in the United States,” Glas said.

Glas’ testimony as prepared for delivery can be found here.

More information:
NCTO
Source:

National Council of Textile Organizations

print close
more
Acafintex looks to a bright future with new Monforts technology (c) AWOL Media
Acafintex father and son ownership team Don Francisco and Lic Francisco Moyano at the new Monforts installation.
14.09.2020

Acafintex looks to a bright future with new Monforts technology

At a total length of over 71 metres, the Montex finishing line that has just been installed by Monforts for Acafintex at its plant in Puebla, Mexico, is one of the highest capacity stenters the German technology leader has delivered to date.

Puebla is known as the epicentre of Mexico’s textile and clothing industry and is ideally placed for supplying both the USA and Europe, being three hours from the Gulf of Mexico for shipping via the Atlantic, and five hours from the Pacific coast as well.

Mexico's textile and clothing industry spans the entire production chain – from cotton growing and man-made fibre production to the manufacture of yarn, fabric, finished clothing and accessories. The industry is estimated to directly employ around 640,000 workers and to provide livelihoods for many more people indirectly. The country is a key supplier of textiles and clothing to the USA, but has faced fierce competition from China, which has until recently been the largest supplier of textiles and clothing to the US market.

At a total length of over 71 metres, the Montex finishing line that has just been installed by Monforts for Acafintex at its plant in Puebla, Mexico, is one of the highest capacity stenters the German technology leader has delivered to date.

Puebla is known as the epicentre of Mexico’s textile and clothing industry and is ideally placed for supplying both the USA and Europe, being three hours from the Gulf of Mexico for shipping via the Atlantic, and five hours from the Pacific coast as well.

Mexico's textile and clothing industry spans the entire production chain – from cotton growing and man-made fibre production to the manufacture of yarn, fabric, finished clothing and accessories. The industry is estimated to directly employ around 640,000 workers and to provide livelihoods for many more people indirectly. The country is a key supplier of textiles and clothing to the USA, but has faced fierce competition from China, which has until recently been the largest supplier of textiles and clothing to the US market.

However, the position of Mexico in the US import market has become more stable following the signing of the United States-Mexico-Canada Agreement (USMCA), which came into force in July this year. The country has also been a key beneficiary of the current trade war that is raging between China and the USA.

In addition, there is scope for higher sales in Mexico’s domestic market. The country has a population of 129 million people who are becoming increasingly prosperous, with a large proportion of younger people who are spending more on clothing.

Flexible operation

Founded in 1986, family-owned Acafintex operates as a commission dyehouse, finishing both knitted and woven fabrics for local companies in Mexico, in widths of between 100cm to 3.6 metres. The company is run by father and son team Don Francisco and Lic Francisco Moyano.

“We have very flexible operations for fabric finishing and also produce and sell our own fabrics for both the fashion industry and for the uniforms market,” says Don Francisco. “These days, we are increasingly finishing materials for technical textiles and for the automotive industry too. We have both local and international suppliers of both yarns and base fabrics and make sure we choose the best and most reliable sources. Exports now account for over 40% of our sales.”

European contract

With a  width of 3.8 metres, the new Monforts Montex line at Acafintex is equipped with no less than 12 double TwinAir drying chambers to meet the requirements of specific technical textiles to a European customer, in a contract secured following the company’s ISO 9001 certification in 2019. The line is equipped with an integrated heat recovery system and also benefits from an exhaust air cleaning system to ensure the most resource-efficient processing available on the market.

On the Monforts TwinAir system, the airflows above and below the fabric being dried can be regulated completely independently of each other, with Optiscan Auto-Balance fully controlling the distance between the fabric and the dryer nozzles via variable-frequency fan motors and CCD chip evaluation. As a result, the evaporation rate of the stenter and its energy utilisation are always fully optimised. Contact-free drying eliminates the possibility of fabric marking or stitch draft.

Highly-intuitive Monforts Qualitex visualisation software allows all machine functions and process parameters to be assessed and controlled easily, and thousands of article specific settings and formulations to be called up at any time – with 100% reproducible results.

In combination with an existing Montex stenter, the new line has expanded finishing capacity at Acafintex to an annual 20 million linear metres.

Modifications

“From the installation to the start-up, we were supported by a team of Monforts technicians and local representative Arnulf Thaler at Sattex here in Mexico,” says Lic Francisco. “Of course, every installation has its challenges and with such big machines we needed to modify several things inside the factory and also required certain modifications from Monforts which were all carried out successfully.”  

Forced, like much of the textile industry globally, to temporarily suspend operations at the height of the Covid-19 pandemic, Acafintex is now back to full production, having installed the necessary safety measures for its employees, and is anticipating a bright future.

“We are passionate about developing new materials in search of mutual benefit for both our clients and suppliers, as well as our own workforce and the environment,” Don Francisco Moyano concludes. “Investment in the latest technology like this new Monforts line plays a key role in helping us achieve our long-term goals.”

Acafintex looks to a bright future with new Monforts technology (c) AWOL Media
More information:
A. Monforts Textilmaschinen GmbH & Co. KG Acafintex Montex
Source:

AWOL Media

print close
more
(c) Kornit Digital
02.09.2020

Kornit Digital Establishes United Kingdom Operation

Move reflects growth in largest European market, bolstering service and support capabilities, commitment to customer relationships

Kornit Digital (Nasdaq: KRNT), a market leader in digital textile printing technology, announced the creation of a new Kornit Digital UK entity, devoted exclusively to serving the United Kingdom market, the industry’s largest market in the EMEA region. By focusing the company’s resources on supporting digital print fulfillers and brands in optimizing their end-to-end operations, this move reflects Kornit’s commitment to streamlining its logistics operation and ensuring a closer relationship with its customers.

Investing in a UK-based organization will empower Kornit to address the growing need for sustainable on-demand production, and reflects the brand’s strategy of enabling proximity production. Kornit will be able to further support customers locally with resources to deliver services and value directly, with fewer logistical hurdles and personnel attuned to the challenges and demands of that region.

Move reflects growth in largest European market, bolstering service and support capabilities, commitment to customer relationships

Kornit Digital (Nasdaq: KRNT), a market leader in digital textile printing technology, announced the creation of a new Kornit Digital UK entity, devoted exclusively to serving the United Kingdom market, the industry’s largest market in the EMEA region. By focusing the company’s resources on supporting digital print fulfillers and brands in optimizing their end-to-end operations, this move reflects Kornit’s commitment to streamlining its logistics operation and ensuring a closer relationship with its customers.

Investing in a UK-based organization will empower Kornit to address the growing need for sustainable on-demand production, and reflects the brand’s strategy of enabling proximity production. Kornit will be able to further support customers locally with resources to deliver services and value directly, with fewer logistical hurdles and personnel attuned to the challenges and demands of that region.

Online retail sales in the United Kingdom nearly doubled from 2013 to 2019, reaching more than £76 billion last year—making it the third-biggest e-commerce market globally (following China and the United States).

“We’ve seen substantial growth in the United Kingdom in recent years and owe a great deal of success to our partners” said Chris Govier, Kornit Digital Managing Director—EMEA. “A dedicated UK distribution hub will ensure faster and more efficient service to our growing customer base, maximizing our customers’ uptime and productivity, and we look forward to building upon our success as the pre-eminent provider of digital print technologies to this largest of European markets.”

The reseller agreement with United Kingdom-based Adelco Screen Process Ltd. has been terminated, and Kornit will assume all these customer relationships directly. Kornit will maintain its strong partnership with Amaya, which has established a considerable footprint as textile print solutions provider to the British textile decoration community.

 

 

More information:
Kornit Digital
Source:

Kornit Digital

print close
more
U.S. Cotton Trust Protocol (c) U.S. Cotton Trust Protocol
15.07.2020

U.S. Cotton Trust Protocol: new traceability tool for US cotton

Starting midth of July, brands and retailers can join the U.S. Cotton Trust Protocol, a new system for responsibly grown cotton that will provide annual data for six areas of sustainability in line with the UN Sustainability Goals. This year-on-year data available for the first time will allow brands and retailers to better measure progress towards meeting sustainability commitments.

The Trust Protocol underpins and verifies sustainability progress through sophisticated data collection and independent third-party verification. By working with Field to Market: The Alliance for Sustainable Agriculture and Control Union Certifications North America, the Trust Protocol enables brands and retailers to better track the cotton entering their supply chain. Brands who become members of the Trust Protocol will have access to aggregate year-over-year data on water use, greenhouse gas emissions, energy use, soil carbon and land use efficiency.

The Trust Protocol is a complement to existing sustainability programs and is designed from the ground up to fit the unique cotton mass-growing environment of the United States.

Starting midth of July, brands and retailers can join the U.S. Cotton Trust Protocol, a new system for responsibly grown cotton that will provide annual data for six areas of sustainability in line with the UN Sustainability Goals. This year-on-year data available for the first time will allow brands and retailers to better measure progress towards meeting sustainability commitments.

The Trust Protocol underpins and verifies sustainability progress through sophisticated data collection and independent third-party verification. By working with Field to Market: The Alliance for Sustainable Agriculture and Control Union Certifications North America, the Trust Protocol enables brands and retailers to better track the cotton entering their supply chain. Brands who become members of the Trust Protocol will have access to aggregate year-over-year data on water use, greenhouse gas emissions, energy use, soil carbon and land use efficiency.

The Trust Protocol is a complement to existing sustainability programs and is designed from the ground up to fit the unique cotton mass-growing environment of the United States.

Last month the Trust Protocol was added to Textile Exchange’s list of 36 preferred fibres and materials that more than 170 participating brands and retailers can select from as part of Textile Exchange’s Material Change Index programme.

More information:
cotton supply chain traceability
Source:

Hill+Knowlton Strategies GmbH

print close
more
28.05.2020

Tailorlux Obtains An Exclusive Patent License From NCR Corporation

Tailorlux, developer of hidden luminescent marking solutions that prove origin and protect the integrity of consumer and industrial textile products, announces that it has obtained a patent license from US-based NCR Corporation.

Under the associated agreement, Tailorlux received a field specific exclusive license under a family of NCR patents pursuant to which Tailorlux will make and sell its IntegriTEX® marking and detection solution for textiles to customers in the United States.

The solution is designed to support and protect Tailorlux clients by enabling reliable proof of origin for their fiber and textile products (including, e.g., Egyptian, PIMA and recycled cotton, recycled PET, special fibres, filaments and other premium materials), thereby authenticating the products and protecting against counterfeiting, mixing and blending. Tailorlux will pay ongoing licensing fees to NCR pursuant to undisclosed financial terms.

Tailorlux, developer of hidden luminescent marking solutions that prove origin and protect the integrity of consumer and industrial textile products, announces that it has obtained a patent license from US-based NCR Corporation.

Under the associated agreement, Tailorlux received a field specific exclusive license under a family of NCR patents pursuant to which Tailorlux will make and sell its IntegriTEX® marking and detection solution for textiles to customers in the United States.

The solution is designed to support and protect Tailorlux clients by enabling reliable proof of origin for their fiber and textile products (including, e.g., Egyptian, PIMA and recycled cotton, recycled PET, special fibres, filaments and other premium materials), thereby authenticating the products and protecting against counterfeiting, mixing and blending. Tailorlux will pay ongoing licensing fees to NCR pursuant to undisclosed financial terms.

More information:
Tailorlux
Source:

Tailorlux GmbH

print close
more
Sherrod Brown (c) NCTO
article as PDF
25.03.2020

Brown pushing plan to address shortage of personal protective equipment

Brown Wrote to President Outlining Critical Steps White House can Take Now to Address Shortage of Personal Protective Equipment

 U.S. Sen. Sherrod Brown (D-OH) hosted a news conference call to discuss his plan for addressing the shortage of personal protective equipment (PPE) needed by healthcare workers on the frontline of keeping Americans healthy and safe during the coronavirus pandemic.

This weekend, Brown wrote to President Trump outlining several steps the Administration should take immediately to address the shortage and ramp up manufacturing of these critical medical supplies.

Brown Wrote to President Outlining Critical Steps White House can Take Now to Address Shortage of Personal Protective Equipment

 U.S. Sen. Sherrod Brown (D-OH) hosted a news conference call to discuss his plan for addressing the shortage of personal protective equipment (PPE) needed by healthcare workers on the frontline of keeping Americans healthy and safe during the coronavirus pandemic.

This weekend, Brown wrote to President Trump outlining several steps the Administration should take immediately to address the shortage and ramp up manufacturing of these critical medical supplies.

In his plan and in his letter to the President, Brown lists nine steps the Administration could take immediately, including:

  1. Designate a government official who can serve as a point person responsible for coordination the acquisition and development of PPE, medical devices, and other supplies necessary to fight the coronavirus pandemic. 
  2. Establish a PPE and medical device assessment and database to monitor the supply and anticipated needs for PPE, ventilators, diagnostic test kits, and other needed medical supplies to respond to the coronavirus pandemic. 
  3. Publish a list of PPE, medical device, and general medical supply needs to respond to the coronavirus pandemic. 
  4. Establish a hotline capable of handling significant call capacity that will provide U.S. producers centralized information about the results of the national assessment and the current need for PPE, devices, and other health care supplies. 
  5. Provide immediate funding to manufacturers to purchase equipment, retool machinery, hire additional workers, and cover any other expenses needed to increase production of PPE and necessary medical devices and supplies.
  6. Streamline contract and certification procedures to ensure production and delivery of materials are not delayed due to paperwork constraints.
  7. Provide critical protections for workers who are making PPE, medical devices, and necessary supplies to receive a waiver from any shelter-in-place requirements to allow workers to volunteer to go to work in these critical industries. 
  8. Provide purchase guarantees and delivery assistance of product to the communities and health care facilities that need the products most. 
  9. Support companies that have the capacity to sterilize reusable equipment to alleviate the existing PPE shortage. 

In his plan, Brown also pointed out important legislative actions that will help ramp up production of these critical supplies, including expanding the strategic national stockpile authority, substantially increasing Defense Production Act funding and strengthening domestic preferences.

More information:
NCTO Coronavirus United States
Source:

NCTO

print close
more
NaviColor Logo Huntsman Textile Effects
NaviColor Logo
24.01.2020

HUNTSMAN TEXTILE EFFECTS PARTNERS WITH XENON ARC TO FORM NAVICOLOR

Dedicated marketing channel to better serve the US market

Huntsman Textile Effects and Xenon arc today announced the formation of NaviColor, a dedicated marketing channel to service the unique needs of select customers in the United States textiles and apparel industry.  

NaviColor is a business specifically designed to meet the needs of select Huntsman Textile Effects customers and to further expand the growing customer base. NaviColor features a dedicated team of professionals in a highly advanced technological environment to support customers utilizing Huntsman’s Textile Effects innovative chemicals, dyes and digital inks in the United States.  

NaviColor is the latest deployment of Xenon arc’s innovative xa-Direct model that helps the world’s preeminent manufacturing companies reach, grow and more effectively service the needs of their customer bases. Leveraging its domain expertise of the marketplace, combined with extensive voice of the customer research and leading-edge technology platform, the xa-Direct model delivers enhanced customer intimacy, valuable insights and improved customer service levels.

Dedicated marketing channel to better serve the US market

Huntsman Textile Effects and Xenon arc today announced the formation of NaviColor, a dedicated marketing channel to service the unique needs of select customers in the United States textiles and apparel industry.  

NaviColor is a business specifically designed to meet the needs of select Huntsman Textile Effects customers and to further expand the growing customer base. NaviColor features a dedicated team of professionals in a highly advanced technological environment to support customers utilizing Huntsman’s Textile Effects innovative chemicals, dyes and digital inks in the United States.  

NaviColor is the latest deployment of Xenon arc’s innovative xa-Direct model that helps the world’s preeminent manufacturing companies reach, grow and more effectively service the needs of their customer bases. Leveraging its domain expertise of the marketplace, combined with extensive voice of the customer research and leading-edge technology platform, the xa-Direct model delivers enhanced customer intimacy, valuable insights and improved customer service levels.

“We are excited to partner with Huntsman Textile Effects,” commented Mica Zuniga, Vice President of Strategic Growth for Xenon arc.

NaviColor will exclusively represent Huntsman Textile Effects product portfolio including:

  •  Dyes
  •  Chemical Auxiliaries
  •  Digital Inks

 

More information:
Huntsman Textile Effects Xenon arc
Source:

(c) Huntsman Textile Effects

print close
more
Fusion C flexographic press (c) PCMC
Fusion C flexographic press
article as PDF
09.01.2020

Paper Converting Machine Company: Prestige-Pak invests in additional Fusion C flexographic press

Purchase marks company’s second in two years as growth continues

Paper Converting Machine Company (PCMC), announced that Prestige-Pak of Fond du Lac has purchased a new Fusion C flexographic press. The press will be the second Fusion C (and the fourth PCMC press) for Prestige-Pak, a second-generation, family-owned business, and producer of printed and laminated flexible packaging materials.

“We’re looking forward to our new Fusion C press,” said Vince Kuber, President of Prestige-Pak. “Our Fusion C and Fusion presses have helped us better meet the needs and requirements of our customers. We’ve experienced significant growth, and that has prompted us to add an additional press. One deciding factor in choosing PCMC is the fact that the company’s machines are engineered and built in the United States.”

Purchase marks company’s second in two years as growth continues

Paper Converting Machine Company (PCMC), announced that Prestige-Pak of Fond du Lac has purchased a new Fusion C flexographic press. The press will be the second Fusion C (and the fourth PCMC press) for Prestige-Pak, a second-generation, family-owned business, and producer of printed and laminated flexible packaging materials.

“We’re looking forward to our new Fusion C press,” said Vince Kuber, President of Prestige-Pak. “Our Fusion C and Fusion presses have helped us better meet the needs and requirements of our customers. We’ve experienced significant growth, and that has prompted us to add an additional press. One deciding factor in choosing PCMC is the fact that the company’s machines are engineered and built in the United States.”

The Fusion C is loaded with fast make-ready and waste-saving features, all in a smaller footprint with fewer parts. This reliable flexographic press also includes PCMC’s SteadyPrint print-stabilization technology, winner of the 2019 FTA Technical Innovation Award. With this feature, the bearing arrangement is coupled with an algorithm that uses noise-canceling technology to largely remove the impact of bounce when printing graphics with hard edges. With patents pending on all features, SteadyPrint is currently the only product on the market using this kind of technology to eliminate disturbances and monitor in real time.

More information:
Paper Converting Machine Company PCMC press technology
Source:

BARRY-WEHMILLER

print close
more
(c) CHOMARAT
04.03.2019

Chomarat Carbon Reinforcements at JEC WORLD 2019

Composite reinforcement specialist Chomarat will exhibit its latest woven and multiaxial carbon fibre reinforcements at JEC World 2019. "Prepregs are used in the most demanding markets, such as aerospace or the automotive industry. Due to their high performance, Chomarat’s carbon fabrics are highly considered by prepreggers. Compared to standard solutions, the multiaxial reinforcements developed by the group offer Chomarat’s converter customers significant productivity gains. With its production sites in France, Asia and the United States, Chomarat is able to supply its customers and guarantee the same high level of quality in all countries," explains Group Managing Director Michel Cognet.

Composite reinforcement specialist Chomarat will exhibit its latest woven and multiaxial carbon fibre reinforcements at JEC World 2019. "Prepregs are used in the most demanding markets, such as aerospace or the automotive industry. Due to their high performance, Chomarat’s carbon fabrics are highly considered by prepreggers. Compared to standard solutions, the multiaxial reinforcements developed by the group offer Chomarat’s converter customers significant productivity gains. With its production sites in France, Asia and the United States, Chomarat is able to supply its customers and guarantee the same high level of quality in all countries," explains Group Managing Director Michel Cognet.

C-WEAVE™ - THE QUALITY AND RELIABILITY BENCHMARK
In just a few years, prepreggers have come to consider Chomarat's C-WEAVE™ carbon-fibre fabrics as a benchmark for surface-finish quality and processability.
The reinforcement contributes to productivity and reliability during the prepregging process. Helen Doughty, Director at SHD Composites, testifies: “The consistent high quality of C-WEAVE™ has been a key part of SHD Composite Materials continued success and growth.”
"Prepreg users often manufacture Class A surface parts for demanding applications, and they need excellence and reproducibility," explains Chomarat’s Prepreg Market Manager Ulrike Salmon.

C-PLY™: GOING FURTHER WITH CARBON MULTIAXIALS
The advantages of multi-axial reinforcements are now well established - oriented axes, absence of resin-rich areas allowing a high fibre content, and improved mechanical tensile and/or bending performance thanks to the non-crimp fibres.
By developing its C-PLY™ range, Chomarat further demonstrates that multiaxials are a real asset in terms of performance and appearance. "Chomarat strives to minimize marking on parts and to optimize surface quality through fibre spreading and the use of suitable stitches. C-PLY™ can also integrate aesthetic functions by using the assembly seam as a graphic design", continues Ulrike Salmon.
These new advantages are important for the automotive, sports-equipment and consumer-electronics markets, which seek to combine premium quality and productivity.

 

(c) CHOMARAT
More information:
Chomarat, Altus Group, Carboncast CHOMARAT
Source:

AGENCE APOCOPE

print close
more
(c) Menabò Group s.r.l
article as PDF
23.10.2018

Metalbottoni strengthens its partnerships with northern Europe thanks to its green range.

For the appointment with the exhibition dedicated to denim Metalbottoni focuses on its new range of increasingly green accessories which have captured the attention of the northern European brands most attentive to sustainability in the world of jeans and elsewhere. A range of proposals which, in recent months, has progressed remarkably, following the rules established by the corporate responsibility protocol called NO IMPACT.

This is a responsible approach underlined by the promise “Committed Accessories”, but also a strategic choice with a view to approaching those markets which so far have appeared to be most keen on the subject, for example northern Europe, Benelux and the United States, California in particular. This means that Metalbottoni is acting with increasing assertiveness on those scenarios where it has been present for a long time, in order to increase the segments depth, intercepting new ones, thanks to its wide-ranging eco-compatible proposal.

For the appointment with the exhibition dedicated to denim Metalbottoni focuses on its new range of increasingly green accessories which have captured the attention of the northern European brands most attentive to sustainability in the world of jeans and elsewhere. A range of proposals which, in recent months, has progressed remarkably, following the rules established by the corporate responsibility protocol called NO IMPACT.

This is a responsible approach underlined by the promise “Committed Accessories”, but also a strategic choice with a view to approaching those markets which so far have appeared to be most keen on the subject, for example northern Europe, Benelux and the United States, California in particular. This means that Metalbottoni is acting with increasing assertiveness on those scenarios where it has been present for a long time, in order to increase the segments depth, intercepting new ones, thanks to its wide-ranging eco-compatible proposal.

NO IMPACT: “Committed Accessories” expanded
It is the constant search for sustainable innovation that reveals the extent of the progress made over the past few months by Metalbottoni. For the Kingpins Show exhibition, there are many novelties in store from the company, extending its range in terms of sustainability. Firstly, there is the new MONSTER line eco-processing, special for pure denim, which – apart from metal – includes new material solutions developed through high-profile collaborations.

(c) Menabò Group s.r.l (c) Menabò Group s.r.l (c) Menabò Group s.r.l (c) Menabò Group s.r.l
More information:
apparel fabrics and accessories Sustainability NO IMPACT Metalbottoni
Source:

Menabò Group s.r.l

print close
more
Metalbottoni strengthens its partnerships with northern Europe thanks to its green range. (c) Metalbottoni SPA
23.10.2018

Metalbottoni strengthens its partnerships with northern Europe thanks to its green range.

  • At Kingpins Show Amsterdam (24-25 October) the new “Committed Accessories” dedicated to denim take centre stage.

For the appointment with the exhibition dedicated to denim Metalbottoni focuses on its new range of increasingly green accessories which have captured the attention of the northern European brands most attentive to sustainability in the world of jeans and elsewhere. A range of proposals which, in recent months, has progressed remarkably, following the rules established by the corporate responsibility protocol called NO IMPACT.

This is a responsible approach underlined by the promise “Committed Accessories”, but also a strategic choice with a view to approaching those markets which so far have appeared to be most keen on the subject, for example northern Europe, Benelux and the United States, California in particular. This means that Metalbottoni is acting with increasing assertiveness on those scenarios where it has been present for a long time, in order to increase the segments depth, intercepting new ones, thanks to its wide-ranging eco-compatible proposal.

  • At Kingpins Show Amsterdam (24-25 October) the new “Committed Accessories” dedicated to denim take centre stage.

For the appointment with the exhibition dedicated to denim Metalbottoni focuses on its new range of increasingly green accessories which have captured the attention of the northern European brands most attentive to sustainability in the world of jeans and elsewhere. A range of proposals which, in recent months, has progressed remarkably, following the rules established by the corporate responsibility protocol called NO IMPACT.

This is a responsible approach underlined by the promise “Committed Accessories”, but also a strategic choice with a view to approaching those markets which so far have appeared to be most keen on the subject, for example northern Europe, Benelux and the United States, California in particular. This means that Metalbottoni is acting with increasing assertiveness on those scenarios where it has been present for a long time, in order to increase the segments depth, intercepting new ones, thanks to its wide-ranging eco-compatible proposal.

NO IMPACT: “Committed Accessories” expanded

It is the constant search for sustainable innovation that reveals the extent of the progress made over the past few months by Metalbottoni. For the Kingpins Show exhibition, there are many novelties in store from the company, extending its range in terms of sustainability. Firstly, there is the new MONSTER line eco-processing, special for pure denim, which – apart from metal – includes new material solutions developed through high-profile collaborations.

Also the LEATHER ACCESSORIES line is extending its range of sustainable materials. The line of tags and rear waistband labels is enhanced through interpretations based on two new eco-friendly materials: recycled jacron and cork. For denim designed to be 100% green, also in accessories. Sustainable proposals are increasingly integrated throughout the Metalbottoni range, for example the new glossy and satin finishing developed for the line LABORA on exclusive metal accessories.

Partnerships with brands from northern Europe: Bik Bok and Kings of Indigo

One of the most important collaboration in sustainable fashion is the one with the Norwegian brand Bik Bok. The brand that was founded in 1973 dedicated to young women, today offer accessible trend driven fashion through a network of over 200 single-brand stores in Norway, Sweden, Finland and Austria. The brand has since 2017 chosen to use only BCI (Better Cotton Initiative) certified cotton for their in house premium denim brand Never Denim. For Never Denim Metalbottoni has realized a series of jeans buttons and personalized rivets, all entirely produced according to the NO IMPACT protocol; which means recycled raw materials, no use of chemical agents, through processing and machinery that minimize the use of water and electricity, resulting 100% from photovoltaic panels. All these features are part of a capsule developed for the new AW 2018 collection for Never Denim entirely made with Fair Trade certified cotton. Thanks to this project, the No Impact becomes an integral part of a collection that is aimed at a very large, young and aware public.

Another important brand which has chosen the new NO IMPACT metal accessories is Kings Of Indigo, the Dutch denim mill which is presenting top-quality jeans, inspired by traditional American style, combined with Japanese attention to detail, which today has as many 250 authorised dealers in 12 countries, with a very strong focus on northern Europe.

More and more sportswear for the new Monster SS 2020 collection

The great Metalbottoni classic dedicated to denim confirms the trend of strongly merging with the world of sportswear. The MONSTER line introduces the style developments of the SS 2020 season, with the range being more and more influenced by technical and sports interpretations, alongside sustainable production processes based on the NO IMPACT protocol. The new MONSTER proposals include items made of non-metal material, using sustainable processes, of natural origin and 100% biodegradable; these accessories are similar in appearance to traditional polyester, interpreted in a responsible way, developed through a series of special and unique effects. Also the button, rivet and small plate range has been restyled, having always been the core of the MONSTER line. Today the number of solutions available increases  hanks to new vintage finishing, developed on metal accessories, which are also totally green. “The denim world is moving in a clear direction: that of sustainability.” says Maria Teresa Ricciardo, Creative Director at Metalbottoni, “This is true in particular for some markets, which are strategic for us, and where we are proving increasingly successful, thanks to constant product and process research from a green  perspective, which Metalbottoni today is able to offer within the framework of the NO IMPACT pathway which we have been pursuing for a long time”.

Metalbottoni strengthens its partnerships with northern Europe thanks to its green range. (c) Metalbottoni SPA Metalbottoni strengthens its partnerships with northern Europe thanks to its green range. (c) Metalbottoni SPA Metalbottoni strengthens its partnerships with northern Europe thanks to its green range. (c) Metalbottoni SPA
Source:

Menabò Group s.r.l

print close
more
METALBOTTONI presents the new collection VÀNITA (c) METALBOTTONI
19.09.2018

METALBOTTONI presents the new collection VÀNITA

  • Italian expertise, research and green innovation.
  • METALBOTTONI ups the stakes with one-of-a-kind interpretations, to enhance its market presence.

At Première Vision Accessories (Paris, 19-21 September) the company presents the new collection VÀNITA, a mix of leatherwear and sportswear, based on Made in Italy craft, with an increasingly wide and coordinated range.

Based on product experience, combining new trends in accessories. The METALBOTTONI strategy is enriched with product novelties which aim at exploring new existing market segments. A strategy which increasingly leads great artisan production skills to meet constant research and expansion of the range, with the world of sportswear becoming more and more pivotal; without forgetting the important sustainable innovations of the NO IMPACT protocol.

No Impact becomes “Committed Accessories”

  • Italian expertise, research and green innovation.
  • METALBOTTONI ups the stakes with one-of-a-kind interpretations, to enhance its market presence.

At Première Vision Accessories (Paris, 19-21 September) the company presents the new collection VÀNITA, a mix of leatherwear and sportswear, based on Made in Italy craft, with an increasingly wide and coordinated range.

Based on product experience, combining new trends in accessories. The METALBOTTONI strategy is enriched with product novelties which aim at exploring new existing market segments. A strategy which increasingly leads great artisan production skills to meet constant research and expansion of the range, with the world of sportswear becoming more and more pivotal; without forgetting the important sustainable innovations of the NO IMPACT protocol.

No Impact becomes “Committed Accessories”

The guideline for restyling the METALBOTTONI range over the past two years has been the recent implementation of the NO IMPACT corporate sustainability protocol, which has just acquired a new “dress”, associated with the following pay-off: “Committed Accessories”. It is a way of underscoring the constant green development of the company over the past few years, in terms of process and product: use of recycled raw materials, development of finishing without chemicals, implementation of processes which today have allowed to reduce electricity and water consumption to almost zero.

Moreover the range of NO IMPACT proposals for this season has expanded to include not only new metal finishing but also leather label completely made from processing scrap, thus establishing Metalbottoni as “partner for branding elements” also in terms of sustainability. Pure Made in Italy and constant expansion of collections towards sportswear The great skill in metal processing, which for sixty years now has characterised the top-of-the-range quality of METALBOTTONI products, is now combined with constant research work conducted by our in-house Style Office, resulting in new collections which are more and more in line with the trends emerging from major trade fairs. Maintaining a presence on strong markets (central Europe, Northern Europe and United States), increasing the depth of segments and intercepting new ones. This is the main goal also chosen for the Première Vision Accessories Exhibition where, alongside the autumn-winter 2019/2020 collections, there will be a preview of VÀNITA, the new collection dedicated to leatherwear and more.

METALBOTTONI is proving to be one of the most dynamic companies in the accessory industry.

Over the past two years, in fact, it has introduced numerous product and process innovations, aiming at increasing its range especially as regards sportswear accessories. This trend was driven by a substantial increase in demand by read-to-wear and luxury brands in the past two seasons, and today it means new proposals which account for 35% of the range for METALBOTTONI. New collections have been presented in the past two seasons expressly dedicated to the sportswear world, namely GRAVITA, the first line designed by the company for pressure buttons, and MÀRYA, the new beachwear collection. Also the line called LABORA, the classic collection of accessories for fashion and ready-to-wear has been constantly enhanced with proposals combining style and technical performance. This mix of fashion and sport elements is increasingly evident in the company’s product range, for example in the combination of different materials, using metal with nylon or other resins to create new and unique accessories.

Vànita: beyond leatherwear, a world of accessories

The meeting between fashion, luxury and sportswear has produced VÀNITA, the brand new collection which presents a new approach to accessories dedicated to leatherwear, from an allround perspective from luxury to sportswear. Developed starting from solid product research by the company’s in-house Style Office, VÀNITA is a true meeting of styles and elements, a combination of high product standards with unique elegance. This line introduces one-of-a-kind visions for accessories, exploring highly original pathways dedicated to the world of leather. The VÀNITA proposal ranges from accessories for leatherwear and small leatherwear, to those for shoes, bags and the sportswear worlds. There are two main lines within this collection: one is expressly designed for the world of luxury, the other has a more technical and sporty approach. A true mix between artisan metal processing, based on the great METALBOTTONI expertise in this sector, and “ingredients” such as nylon, rubber finishes or innovative 3D processing, which are often combined together.

“Our goal is to offer an increasingly comprehensive range which allows us to explore new segments on the markets where we are present” - says Gregorio Valli, CEO and President of METALBOTTONI S.P.A – “a ‘recipe’ which should be able to integrate our unmatched product expertise with a constant expansion of our range and continuous implementation of our pathway towards corporate responsibility and sustainability”.

METALBOTTONI presents the new collection VÀNITA (c) METALBOTTONI METALBOTTONI presents the new collection VÀNITA (c) METALBOTTONI METALBOTTONI presents the new collection VÀNITA
More information:
Metalbottoni Leather Accessoires
Source:

Menabò Group s.r.l

print close
more
(c) Tenowo
01.08.2018

Tenowo announces Strategic Expansion

Tenowo, Inc. and Tenowo GmbH, Hoftex Group AG businesses and manufacturers of engineered nonwovens, announce a new addition to the company, Tenowo de Mexico, S. de R.L. de C.V. As a first step it involves the establishment of a sales office and warehouse in the city of San Luis Potosí, Mexico.

San Luis Potosí, Mexico – The new entity is jointly owned by Tenowo Inc. in the USA and Tenowo GmbH in Germany. It was established in response to increased demand for Tenowo’s automotive products in the Mexican market and will house materials manufactured both in the United States and Germany.

“This location provides Tenowo, Inc. with a footprint in a fast-growing geographic part of our market and is hopefully the first step towards further expansion. San Luis Potosí is a thriving city in the heart of the Bajio region of Mexico and has access to four major ports. In addition, it is within a few hours of the major automotive manufacturing hubs in Mexico.” stated Chris Peart, President and CEO of Tenowo, Inc. “It is the ideal location for our needs,” he added.

Tenowo, Inc. and Tenowo GmbH, Hoftex Group AG businesses and manufacturers of engineered nonwovens, announce a new addition to the company, Tenowo de Mexico, S. de R.L. de C.V. As a first step it involves the establishment of a sales office and warehouse in the city of San Luis Potosí, Mexico.

San Luis Potosí, Mexico – The new entity is jointly owned by Tenowo Inc. in the USA and Tenowo GmbH in Germany. It was established in response to increased demand for Tenowo’s automotive products in the Mexican market and will house materials manufactured both in the United States and Germany.

“This location provides Tenowo, Inc. with a footprint in a fast-growing geographic part of our market and is hopefully the first step towards further expansion. San Luis Potosí is a thriving city in the heart of the Bajio region of Mexico and has access to four major ports. In addition, it is within a few hours of the major automotive manufacturing hubs in Mexico.” stated Chris Peart, President and CEO of Tenowo, Inc. “It is the ideal location for our needs,” he added.

Dr. Harald Stini, Global Managing Director for Tenowo commented, “Tenowo continues to have strong growth prospects worldwide and this is part of our efforts to capitalize on new opportunities. We hope that this venture will enable us to support our global customers with locations in Mexico and gain new regional customers.”

More information:
Tenowo Mexico
Source:

Charles Barker Corporate Communications GmbH

print close
more
Bally Logo
26.07.2018

Bally Completes its Executive Team

Bally, the historic Swiss luxury brand is pleased to announce the appointment of two key figures to its executive team, completing the process of strategic redevelopment begun last year with the transfer of the Creative, Merchandising and Marketing offices from London to its new showroom in Milan.

Effective immediately, Eva Quirrenbach joins Bally as Chief Marketing Officer following a term in New York as Vice President of Global Brand Marketing at Tory Burch, having previously occupied strategic roles within the Tod’s Group in both Italy and the United States. Eva is a recognised expert in all aspects of international branding and marketing within the luxury sector, and with her proven understanding of consumer behaviour, she played an integral role in the development and acceleration of the digital footprint and in supporting global brand development at Tory Burch.

Bally, the historic Swiss luxury brand is pleased to announce the appointment of two key figures to its executive team, completing the process of strategic redevelopment begun last year with the transfer of the Creative, Merchandising and Marketing offices from London to its new showroom in Milan.

Effective immediately, Eva Quirrenbach joins Bally as Chief Marketing Officer following a term in New York as Vice President of Global Brand Marketing at Tory Burch, having previously occupied strategic roles within the Tod’s Group in both Italy and the United States. Eva is a recognised expert in all aspects of international branding and marketing within the luxury sector, and with her proven understanding of consumer behaviour, she played an integral role in the development and acceleration of the digital footprint and in supporting global brand development at Tory Burch.

“Eva is an excellent addition to the Bally team. The combination of a consolidated experience and understanding of luxury brands along with her background driving the strategic development of successful global projects make her the ideal leader to drive Bally's commitment to unified commerce on a global level".
Frédéric De Narp, Bally Group CEO

Bally has moved to a three-pronged regional strategy and as such is also pleased to announce the promotion of Silvia Onofri to a new role as CEO for the EMEA region, in addition to her current role as Vice President of Global Wholesale. During her time in Bally, Silvia has obtained outstanding results entering top tier multi-brand doors around the world and increasing Bally's footprint in Travel Retail to make the brand a global leader in the field.

Silvia has extensive experience in the global fashion and luxury industry, having first joined the Bally team 10 years ago, following key marketing roles in Bulgari.

“Silvia has the unique benefit of intimately understanding the Bally brand and it’s DNA, and having proven experience in forging new relationships with the world’s leading retailers and their customers. With this invaluable expertise in hand, I am confident that she will infuse the EMEA Retail division with enthusiasm, professionalism and unique market insights to take Bally to the next level in these crucial markets” -
Frédéric De Narp.

The arrival of Eva Quirrenbach and the promotion of Silvia Onofri are part of Bally Group CEO Frédéric de Narp’s ongoing strategic vision to infuse Bally’s prestigious brand identity with heightened dynamism, appeal and allure.
Both roles report directly to Bally’s Group CEO, Frederic de Narp.

Eva Quirrenbach (c) Bally - Eva Quirrenbach Silvia Onofri (c) Bally - Silvia Onofri
More information:
Bally
Source:

NETWORK PUBLIC RELATIONS GMBH

print close
more
20th anniversary of the JEC Innovation Awards (c) GROUPE JEC - Thierry-Alain TRUONG
07.03.2018

20th anniversary of the JEC Innovation Awards

  • JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

  • JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

“JEC Group supports innovation. In 1998, it created the first award dedicated to composites, as a way to promote and reward the sector’s champions. Thanks to the work of JEC Group’s teams, the program has become an international benchmark. Each year, we receive more than a hundred applications from all over the world. Selection is now based on criteria like the level of involvement of the innovation’s partners in the value chain, the technical nature of the innovation, or its commercial applications,” explains JEC Group President & CEO Frédérique Mutel.
A new feature this year is that the jury revealed the winners during the ceremony, and the public could choose their favorite innovation before, during, and after the ceremony. So there is still time to vote! Votes are opened until Thursday March 8th, 5pm http://innovationawards.jec-world.events
Did you miss the ceremony?

11 AWARD WINNERS:
AEROSPACE APPLICATION
Winner:
AeroComposit, JSC (Russia) and its partner Solvay (United Kingdom)

  • Infusion technology for an aircraft wing

The use of infusion technology to manufacture primary structural components for an aircraft wing. The technology makes it possible to create extra-long, integrated composite structures with complex aerodynamic shapes.

AEROSPACE PROCESS 
2 tied winners!
Winner: Airbus (Germany) and its partners, BMW Group (Germany), Technical University of Munich (TUM) (Germany), Neue Materialien Bayreuth GmbH (Germany), Werkzeugbau Siegfried Hofmann GmbH (Germany), BASF SE (Germany), Foldcore GmbH (Germany), Neenah Filtration (Germany) and SGL Carbon GmbH (Germany)

  • Complex structural applications for MAI sandwich technology

Cost-effective production of a complex 2.5D structure made of thermoplastic composite sandwich, with very short cycle times: under 5 minutes for aerospace materials and 2.5 minutes for automotive materials.

Winner: M. Torres Diseños Industriales SAU (Spain)
Moldless process to manufacture one-piece parts
A new manufacturing process for oversized one-piece reinforced composite structures, without requiring the use of complete molds.

AUTOMOTIVE APPLICATION
Winner: Ford Werke GmbH (Germany) and its partners, Gestamp (United Kingdom), GRM Consulting (United Kingdom) and University of Warwick (United Kingdom)

  • Lightweight composite automotive suspension part

Structural suspension part made of lightweight composite, using a brand-new patented process for prepreg/SMC/steel overmolding that was designed using a new computer-aided engineering (CAE) technology.

AUTOMOTIVE PROCESS
Winner: Audi AG (Germany) and its partners, Voith Composites GmbH & Co. KG (Germany), Dow Automotive (Switzerland), and Zoltek Corp. (United States)

  • Series production of a rear panel module made of carbon composite

For the first time, the potential of carbon fiber reinforced plastics (CFRP) is used to full advantage in series production with a new rear panel module and cost-effective production technologies.

CONSTRUCTION & INFRASTRUCTURE
Winner: Komatsu Seiren Co., Ltd. (Japan) and its partners, Kanazawa Institute of Technology (Japan) and Nagase ChemteX Corporation (Japan)

  • Cabkoma cable made of CFRTP

Komatsu Seiren has developed a cable made of molded carbon fiber reinforced thermoplastic (CFRTP), using a very cost-effective process that consists in polymerizing a thermoplastic epoxy resin in situ.

MARINE
Winner: Uljanik JSC (Croatia)

  • Composite cargo decks for a vehicle carrier

On the SIEM Cicero, a vehicle carrier with a capacity of 7,000 vehicles, glass-fiber reinforced composites are used for a number of the structures for the cargo decks, thereby considerably reducing the ship’s weight, fuel consumption and CO2 emissions.

RAILWAY
Winner: ELG Carbon Fibre Ltd. (United Kingdom) and its partners, Alstom Transport (United Kingdom), Magma Structures (United Kingdom), the University of Birmingham (United Kingdom), and the University of Huddersfield (United Kingdom)

  • A bogie frame made of optimized lightweight carbon fiber

This project has developed the very first carbon-fiber bogie frame that uses a recycled material, making it possible to overcome the obstacles to a commercial adoption of this type of structure.

SPORTS & LEISURE
Winner: BMW Group (Germany) and its partners EDAG Engineering GmbH (Germany), KraussMaffei Technologies GmbH (Germany), Chr. Karl Siebenwurst GmbH & Co. KG (Germany), TUM-LCC (Germany), Automation W + R GmbH (Germany), and FHG-IGCV (Germany)

  • A modular construction system for the rear swing arm suspension of a motorcycle

A modular system to produce a complex-shape swing arm suspension reinforced with carbon fiber. The system can adjust the mechanical properties on a case-by-case basis, for a competitive cost and weight compared to metal solutions.

SMART CITIES
Winner: MC Materiales Compuestos (Argentina) and its partners, Plaquimet (Argentina), Purcom (Brazil), IS Groupe - Composite Integrity (France), and G12 Innovation (Brazil)

  • The Wet Core Pod composite housing module

The Wet Core Pod is a composite housing module with an industrialization potential that can facilitate the most complex, costly and difficult step in a construction project.

SUSTAINABLE DEVELOPMENT
Winner: Cetim-Cermat (France) and its partner, CETIM (France)

  • “3-in-1” line for producing recycled composites

A modular line that uses an innovative thermomechanical process to make large panels from recycled composites or plastics. The panels are then thermoformed into parts.
 

More information:
JEC Innovation Awards JEC World 2018
Source:

Dorothée David & Marion RISCH, Agence Apocope

print close
more
Logo CHOMARAT (C) CHROMARAT
26.02.2018

CHOMARAT presents its latest innovations at the 2018 JEC World

CHOMARAT, the composite reinforcement specialist group, is launching its multiaxial glass NCF for thermoplastic composites. The unique patented stitching yarn used can withstand processing temperatures to 400°C, making it an innovative industrial solution for thermoplastic composites and an alternative to the woven reinforcements used especially in the automotive sector. For the first time, CHOMARAT is also exhibiting a unidirectional carbon NCF reinforcement that is adapted to the productivity and performance requirements in the wind energy sector.

CHOMARAT, the composite reinforcement specialist group, is launching its multiaxial glass NCF for thermoplastic composites. The unique patented stitching yarn used can withstand processing temperatures to 400°C, making it an innovative industrial solution for thermoplastic composites and an alternative to the woven reinforcements used especially in the automotive sector. For the first time, CHOMARAT is also exhibiting a unidirectional carbon NCF reinforcement that is adapted to the productivity and performance requirements in the wind energy sector.

AN INNOVATIVE INDUSTRIAL SOLUTION TO REINFORCE AUTOMOTIVE THERMOPLASTICS
Thanks to a unique patented stitching yarn, the glass NCF reinforcement (G-PLY™) developed by CHOMARAT offers new possibilities in thermoplastic RTM and organosheet processes. “This is an especially innovative solution, utilizing stitching yarns that are compatible with processing temperatures to 400°C. These multiaxials improve the performance and provide a lot of construction freedom in terms of fibre orientation. These new design possibilities contribute to structural optimization. The quest for more lightweight vehicles, shorter cycle times and lower cost is a major issue for all builders,” explains CHOMARAT Automotive Market Manager Francisco De Oliveira.
This new heat-stable G-PLY™ reinforcement can withstand very high processing temperatures without deformation and provides optimal mechanical performance.

A CARBON UD TO REINFORCE EXTRA-THICK WIND TURBINE STRUCTURES
For the first time, CHOMARAT is exhibiting an infusion-moulded laminate made with 150 plies of its new unidirectional carbon C-PLY™. This 600g/m², high-permeability NCF can be used to create extra-thick structures, in particular the wind-turbine blade stiffeners, or spar caps. “Cost reduction is the challenge in the wind energy industry. Increasing the blade length by incorporating carbon stiffeners increases power, and so it also lowers the cost of the energy,” says CHOMARAT Wind Energy Market Manager Raphaël PLEYNET. The carbon UD developed by CHOMARAT provides a solution to achieve the goal to optimize the weight/power ratio. The UD’s high permeability reduces cycle times and lowers the blade production costs.

Professor Sung Ha from the University of Hanyang will give a conference on composite challenges in the wind energy sector at 11:30 am on Wednesday, 7 March 2018 at JEC World.
Established in 1898, CHOMARAT is an international industrial textile group, involved in three businesses: Composites Reinforcements, Construction Reinforcements, Coatings & Films–Textiles. The privately held company operates in France, Tunisia, the United States and China to service its global customers.
CHOMARAT leads a strong innovation strategy, rising to challenges, developing materials for the future. Hence, the Group invests in new technologies and enters into collaborative research programs with universities and technical centers worldwide.
CHOMARAT offers strong technical know-how and mastery of complex technologies in fields ranging from automotive, aerospace, sports, energy, marine, construction, and also in markets requiring creativity and expertise, like luxury goods.

AN INNOVATIVE INDUSTRIAL SOLUTION TO REINFORCE AUTOMOTIVE THERMOPLASTICS (C) CHROMARAT A CARBON UD TO REINFORCE EXTRA-THICK WIND TURBINE STRUCTURES
More information:
CHOMARAT JEC World 2018
Source:

Dorothée DAVID & Marion RISCH, AGENCE APOCOPE

print close
more
Lectra appoints Nathalie Brunel as Vice-President Sales, Fashion & Apparel ©Lectra
Nathalie Brunel
12.12.2017

Lectra appoints Nathalie Brunel as Vice-President Sales, Fashion & Apparel

  • Nathalie Brunel’s role is to support Lectra’s global teams in the roll-out of its new strategy to customers

Paris – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the appointment of Nathalie Brunel to the role of Vice-President Sales, Fashion & Apparel. Based at Lectra’s headquarter’s in Paris, Nathalie reports to Edouard Macquin, Chief Sales Officer, Lectra and a member of the executive committee.

Nathalie Brunel’s role is to support Lectra’s subsidiaries as they conduct the Group’s strategic roadmap through the deployment of an offer—integrating the PLM and the cutting room of the future—which is rooted in customer experience. Nathalie will notably work with six countries: United States, China, Germany, United Kingdom, France and Italy.

  • Nathalie Brunel’s role is to support Lectra’s global teams in the roll-out of its new strategy to customers

Paris – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the appointment of Nathalie Brunel to the role of Vice-President Sales, Fashion & Apparel. Based at Lectra’s headquarter’s in Paris, Nathalie reports to Edouard Macquin, Chief Sales Officer, Lectra and a member of the executive committee.

Nathalie Brunel’s role is to support Lectra’s subsidiaries as they conduct the Group’s strategic roadmap through the deployment of an offer—integrating the PLM and the cutting room of the future—which is rooted in customer experience. Nathalie will notably work with six countries: United States, China, Germany, United Kingdom, France and Italy.

“The fashion and apparel industry, a historic market for Lectra, is the pillar of our international presence. Our customers expect a high level of expertise and advice to meet the challenges they face due to the digitalization of their professions. Nathalie Brunel’s experience in transforming organizations and developing business for complex solutions within large groups is a valuable asset for both Lectra and our customers,” states Edouard Macquin.

“The fashion and apparel ecosystem is clearly entering the digital era. I aim to bring Lectra’s value proposition to our customers, facilitating their adoption of Industry 4.0 principles. I am proud to contribute to the integration of new technologies in their processes, from design to the finished product. It is crucial to meet the needs of companies facing a complex and fragmented market that is generating both local, and global, pressures,” underlines Nathalie Brunel.

Nathalie Brunel has over 20 years of experience in managing large accounts and management responsibility. In 1996, she joined the Altran group where she successively held the roles of Development Director, Director of a business unit, Associate Director, and Executive Director of large accounts. In 2011, Orange Business Services recruited Nathalie Brunel as Vice-President, Business Operations and Support, then Vice-President Large Accounts, Manufacturing and IT. Prior to joining Lectra, Nathalie Brunel held the position of CEO and shareholder of Okavango Energy, a consulting and industrial energy performance company.

Nathalie has a diploma from the Institut supérieur de commerce de Paris.

More information:
Lectra, Unternehmensstrategie, CEO
Source:

Lectra

print close
more