From the Sector

Aachen researchers have developed the adaptive textile facade green.fACade, which was presented on 2^nd August 2018 in the Aachen Faculty of Architecture of RWTH Aachen University, Germany. green.fACade is installed in front of a building like a second skin and can permanently reduce nitrogen oxide pollution in cities.

The researchers achieve the reduction of harmful nitrogen oxides (NO and NO2) by coating the facade with titanium dioxide. Titanium dioxide acts as a photo catalyst and enables the oxidation of nitrogen oxides to form washable nitrate (NO3-). Since the facade is also greened, it contributes to the conversion of carbon dioxide into oxygen by photosynthesis. In addition, a green facade creates an optical resting point in the cityscape and reduces urban heat through evaporation cooling. The enclosed pictures demonstrate how the introduction of green.fACade can have an effect. Picture 1 shows the Aachen Central Bus Station after, picture 2 before the possible introduction of green.fACade.

green.fACade is part of the innovative research project "adaptive textile facades", which uses the special properties of textiles. Thanks to its design, textiles can let sunlight and air through, thus contributing to a modern, aesthetic building design. A new feature of the research project is that further elements such as the titanium oxide coating or sun protection elements are integrated into the textile facade and placed in front of the existing building facade. The adaptive textile facade acts independently and thus reduces energy consumption through the positive climatic effects on the building facade.

"Adaptive Textile Facade" is part of a current research series with the aim of developing innovative facade constructions that are climate-neutral and increase the comfort of local residents. The research team consists of the three RWTH fields of architecture (Faculty of Architecture, PhD student architect M.Sc. Jan Serode), medicine (University Hospital RWTH Aachen, Clinic for Ophthalmology, Prof. Dr Walter) and textile technology (Institut für Textiltechnik, Prof. Dr Gries) and was able to contribute its expertise in the best possible way.

This summer the research team was supported for the first time by the Munich architectural office Auer Weber, represented by managing director Philipp Auer: "For us architects, developments in the field of textile outer shells are a special challenge. Here, highly developed textile materials and processing methods are combined with the lightness and grace of fabrics. Adaptive textile facade elements will increasingly turn the "building shell" into a "building skin", a system that not only offers weather, heat and sun protection, but is in constant intelligent exchange with its environment".

The great importance of these topics for the public was documented by the presence of Kirsten Roßels, representative of the Department of Economics, Science and Europe of the city of Aachen.  Ms Roßels explains: "As the city of Aachen, we are delighted with the innovative and future-oriented project ideas that are being developed at Aachen University, such as the adaptive textile facade. These developments underline the importance of Aachen as a city of science and I would appreciate it if these and other technologies could also become visible in Aachen in the future".

Prof. Dr Gries from the Institut für Textiltechnik sums up: "As textile researchers, we see a great opportunity to develop concrete solutions for our urban living spaces together with renowned experts from other disciplines. I'm sure we can make the urban climate more pleasant and reduce pollution."

• More than EUR 100 mn investment in sustainable production technology until 2022
• Lenzing is committed to improving the textile and nonwoven industries as a leader in sustainable fiber solutions
• UN-Sustainable Development Goals as guiding principles for Lenzing’s sustainability agenda
• All Lenzing sites strive to fulfill the EU Ecolabel standard by 2022

The Lenzing Group, producer of botanic fibers from wood, expands its environmental leadership commitment. As a leader in wood-based cellulosic fibers, Lenzing has particular responsibility and ambition to help raising the bar in sustainability in the textile and nonwovens industries. To fulfill this vision, Lenzing is continuing its ambitious roadmap by investing more than EUR 100 mn in sustainable manufacturing technologies and production facilities until 2022.
 
Lenzing’s circular operating models with closed loop production processes set the standard in the industry. In order to further extend the environmental leadership, a major part of this investment will focus on closed loop production technologies for the expansion of the sulfur recovery systems. The second area of investment will be in improving the effluent treatment units. In addition, Lenzing will upgrade its energy usage to more sustainable solutions reducing its greenhouse gas emissions due to the construction of a gas boiler at its site in China. This investment strengthens Lenzing’s sustainability leadership at its Viscose facility in Nanjing.
 
The investments underline Lenzing’s commitment to the United Nations Sustainable Development Goals (SDG) as guiding principles for its sustainability agenda. One of the most significant SDGs for the company is SDG 12: Responsible production and consumption.
 
Stefan Doboczky, Chief Executive Officer, comments: “The textile and the nonwoven industries face fundamental challenges related to sustainability. Lenzing is passionate to take a leadership role in addressing this and making the world a better place. Our holistic approach to sustainability underpins this scope. The new eco-investment program is a major step forward in our ambitions.”
 
“The United Nations Sustainable Development Goals are a universal call for a sustainable economy that protects the planet and ensures prosperity and well-being for all people”, states Lenzing Chief Commercial
Officer Robert van de Kerkhof. “With our REFIBRA™ technology, Lenzing is innovating to support a more circular, bio-based economy, contributing in particular to SDG 12”, he adds.
 
With the Lenzing Group sustainability targets announced in 2018, Lenzing strives to upgrade all its production sites to the ambitious European Ecolabel standard by 2022. As a result, Lenzing is one of the first companies to commit to a global sustainability-oriented manufacturing standard.

As society becomes increasingly digital while cyber threats are multiplying, trust is immensely precious to everyone, not only to consumers but also to companies and organizations whose business relies on digitalization. This highlights the importance of a versatile and trusted partner that focuses on cybersecurity.

Reflecting Nixu’s purpose, “we keep the digital society running", Nixu growth strategy focuses particularly on cybersecurity services for digital business transformation. Developing and delivering comprehensive cybersecurity services that enable clients to utilize, in a safe manner, the opportunities provided by the Industrial Internet of Things and Digital Identities is a key priority for Nixu.
Today, Nixu reached an important milestone and transferred to the Official List of Nasdaq Helsinki stock exchange and continues on its journey to become the number one choice as a cybersecurity partner for digitalization and the best workplace for cybersecurity professionals.

“When we first got listed on Nasdaq First North in 2014 we were quite small Finnish consultancy, in less than four years we have succeeded in transforming to an international cybersecurity services company and multiplied our size”, said Petri Kairinen, CEO of Nixu. “This is still only the beginning, as the demand for cybersecurity services raises exponentially. The listing on the Official List will enable us to reach further international growth funding which will help us uphold the fast growth speed. Of course, our global enterprise clients will also appreciate the transparency and quality associated with being a listed company.“

Packaging solution made of 100% plastic recyclate delivers circular economy proof point
Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces the successful launch of a new packaging solution produced entirely with post-consumer recycled (PCR) material. Developed in close collaboration with the German consumer and industrial goods company Henkel and two additional value chain partners, this truly sustainable packaging solution is further evidence of how mtm plastics GmbH, a member of the Borealis Group, is helping increase the circularity of plastics. The launch has significance for the consumer goods industry because the robustness of this new packaging solution provides further evidence that plastic recyclate is indeed suitable for a variety of demanding packaging applications, in this case a popular adhesive brand marketed by Henkel.

Value chain collaboration yields plastic bottle and nozzle composed of 100% PCR material
In 2016, Borealis acquired leading German recycler mtm plastics GmbH, which is now a member of the Borealis Group. By leveraging their respective areas of expertise and decades of experience as a virgin polyolefins producer and “upcycler”, respectively, Borealis and mtm plastics are exploring new growth opportunities with joint forces.

A success story originating from this exploration is a recently completed pilot project with Henkel, the global leader for adhesives, sealants and functional coatings. The companies have worked to develop a new packaging solution based on recycled material for the Made-at-Home all-purpose glue bottle and cap, which Henkel is marketing under its well-known Pattex brand.  The aim was to replace the virgin plastic material traditionally used for this packaging with a recyclate-based resin. The resin, however, had to fulfil the diverse material demands for packaging of an adhesive product.

After extensive and joint application development, a new bottle was developed with the proprietary mtm product Purpolen® PE, a high-quality polyethylene regranulate produced by mtm at its facilities in Niedergebra, Germany. Value chain partner KKT Kaller Kunststoff Technik GmbH, a plastics processor also based in Germany, manufactured the bottles. For the three separate components of the adjustable applicator nozzle, which is used for both filigree and wide-area gluing, high-quality Purpolen® PP polypropylene regranulate produced by mtm was identified as the ideal solution. German plastic components manufacturer bomo trendline Technik GmbH produced the applicator nozzles.

The new Pattex Made-at-Home packaging solution successfully passed extensive application tests, including a three-month storage test and other tests of mechanical properties. It was launched on the European market in 2018.

“Our commitment to leadership in sustainability is deeply embedded in our companies´ values,” explained Matthias Schaefer, Project Manager for Global Packaging Engineering at Henkel Adhesive Technologies. “We are at the forefront of the industry when it comes to new sustainability strategies in packaging.  Thus, we identified Pattex Made-at-Home as a candidate for exploring the use of recyclate instead of virgin plastics. This constructive collaboration with our partners proves the viability of 100% PCR material for an adhesive product like Made-at Home. It also underscores our efforts at Henkel to drive leadership in sustainability in the consumer goods sector.”

“As a virgin polyolefins producer, Borealis is thrilled to be among the pioneers in using plastic recyclate in new applications,” says Günter Stephan, Head of Borealis Circular Economy Solutions. “Even though momentum is gaining in the drive to increase the circularity of plastics, we still need to prove without a doubt within the industry that using recyclates – and even 100% PCR – is a suitable and effective option, even for demanding applications. Thanks to this successful value chain cooperation with our partners Henkel, KKT and bomo, we are giving plastics a second life and are thus one step closer to the goal of a more circular economy of plastics.”
 

Archroma, a global leader in color and specialty chemicals, will be presenting its innovative and sustainable denim solutions for manufacturers and brands at DenimsandJeans Vietnam 2018, on June 27 and 28.
From fiber to finish, Archroma offers a scope of possibilities for effects and colors, from the authentic roots of indigo to the most innovative and eco-advanced solutions. Archroma is a recognized leader in integrated solutions, offering best-in-class auxiliaries for bespoke process packages.
Visitors will be able to discover solutions designed to make denim in a more sustainable and responsible way, in particular:
DENISOL®, BRINGING INDIGO BACK TO ITS ROOTS - NOW ANILINE-FREE*
Archroma’s Denisol® range is a newly developed pre-reduced liquid indigo solution that is manufactured in Archroma’s award winning ‘zero liquid discharge’ manufacturing plant in Pakistan.

• Denisol® Indigo 30 liq is compliant with major official eco-standards and requirements from retailers, brands and fashion leading companies and helps to produce fabrics suitable for current eco-labeling such as bluesign® and GOTS.
• Responding to demands for a non-toxic alternative to the dyes that are used for the iconic and traditional indigo blue that consumers associate with denim and jeans, Archroma just announced the upcoming new Denisol® Pure Indigo 30.

ADVANCED DENIM, TOWARDS WATERLESS DENIM DYEING
Consider this: The water needed to produce one pair of jeans is said to be ~ 11'000 liters(1). With approximately 167 million pairs of jeans produced monthly(2), that is 1,837,000,000,000 liters of water consumed every month in the process! Based on the Denim-Ox and Pad/Sizing-Ox dyeing processes, Archroma’s multi-awarded ADVANCED DENIM, dyeing technology allows savings of up to 92% in water, 87% in cotton waste and 30% in energy, compared to a conventional denim dyeing process.
The technology has been adopted by brands like Patagonia and received the prestigious 2012 ICIS Innovation Award and Innovation with Best Environmental Benefit Award.

• Optisul® C, “soft colors” made easy
  Colors other than blue have been tricky to achieve in the past. With Optisul® C dyes, denim manufacturers can expand their color horizons with this range of six dyes especially designed to produce soft denim colors in continuous dyeing processes, as well as on coating and printing. Optisul® C affinity-free, sulfide-free dyes can easily be combined with each other to create garments suitable for wash-down treatments in a wide array of easily achievable and reproducible soft colors. They are suitable for GOTS and bluesign® approval.
• Diresul® RDT Ocean Blues, ocean-themed bright sulfur blue dyes
  Archroma’s Diresul® RDT Ocean Blues are a collection of vibrant, ocean-themed bright sulfur blue dyes. These best-in-class dyes and their auxiliaries bring out the best of indigo, improve workability, dyeing consistency and process safety.
  They can be combined with Denisol® Indigo 30 liq in bottoming/topping manufacturing routes for avant-garde blue styles. At the booth, Archroma will display an “illustration collection” of exciting indigo casts.
• Diresul® blacks & greys, a universe of greys and deep black and navies.
  Archroma’s dye portfolio of conventional and black Diresul® specialties allow to create a universe of greys and deep black and navies. From superficial to solid blacks for both extreme wash-down and stay black effects.

EARTHCOLORS, TRACEABLE FROM NATURE TO FASHION
As consumers increasingly aspire to functional, beautiful and meaningful clothing, brands and manufacturers are increasingly interested in the environmental impact of the denim industry. Archroma has placed sustainability at the heart of its innovation process to create products and processes that improve the industry’s sustainability.
The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
The EarthColors allow to produce the earth tones that are coming strong: red, brown and green colors. They have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.

SOLUTION PACKAGES FOR SUSTAINABILITY
Brand owners and retailers around the world are taking action to evaluate the environmental impact of textile treatment, dyeing and finishing processes in response to consumer concerns.

Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.
Archroma’s portfolio of ZDHC MRSL-compliant chemicals and dyes is integrated into the ONE WAY calculation tool since 2013.
“Innovation and sustainability go hand in hand,” says Paul O’Prey, Head of Sales, Brand & Performance Textile Specialties, Archroma, Vietnam. “While developing new products and services, we always consider the environmental impact so they are as sustainable as possible. This can be seen in our innovative and eco-advance products, such as the water-saving ADVANCED DENIM and the aniline-free* Denisol® Pure Indigo.”

Attendees of the Association for Professionals in Infection Control and Epidemiology (APIC) expo confirmed Thursday the value of effective guidelines for properly handling clean linen, substantiating Hygienically Clean Healthcare certified operators’ efforts to help them ensure linen remains safe and clean when it reaches patients.

Visitors to the Hygienically Clean exhibit at APIC’s Annual Conference were supported in this respect by receiving Handling Clean Linen in a Healthcare Environment, a guide produced by these certified linen, uniform and facility services operators. APIC attendees shared anecdotes of mishandling clean linen in their workplaces including:

• Employees holding and carrying stacks of bed linen and towels touching their chests
• Commingling clean and soiled linen
• Storing linen in closets in guest rooms instead of a secure linen room

Certified operators’ certification fees provided funding for creating and distributing the guide (and other resources for healthcare facilities), manifesting the Hygienically Clean program’s philosophy of addressing healthcare providers’ operational needs outside the scope of outsourced laundries’ traditional functions.

Angela Freeman, Hygienically Clean program manager, explained the importance of such laundries partnering with healthcare providers to create and implement plans to ensure clean textiles are delivered to patients. “When healthcare textiles (HCTs) reach a facility’s doors, an outsourced laundry’s role in maintaining their hygiene depends greatly on how the service agreement addresses linen distribution. Hygienically Clean’s resources for healthcare providers reflect the willingness of our certified operators to partner with their customers.”

A video version of the clean linen guide is in the works. TRSA, the global association for the linen and uniform services industry and Hygienically Clean administrator, continues to build the industry’s appreciation for partnering with healthcare customers.

In May, TRSA introduced Producing Hygienically Clean Textiles, an e-learning class to help laundry employees understand their roles in the processes, procedures and policies necessary to produce clean linens and uniforms. TRSA’s annual Healthcare Conference has guided industry managers in progressive linen distribution techniques to aid their training of their customers in these.

Business networking event on the future of leather interiors

Lectra, the technological partner for companies using fabrics and leather, welcomed guests from all areas of the automotive leather supply chain at its International Advanced Technology Center (IATC) in Bordeaux-Cestas, France, for two action-packed days of demonstrations, workshops and talks by industry experts during the fourth annual “Go Digital” automotive leather event.
Building on the previous editions’ themes of digitalization of manufacturing processes and the adoption of Industry 4.0 principles, this year’s presentations focused on the value creation enabled by leveraging manufacturing data. A showcase for the innovative applications Lectra is developing based on Industry 4.0 principles, the company’s trade gathering demonstrated how disruptive new technologies are enhancing the onboard experience while reorganizing the automotive interiors supply chain.

Several guest speakers provided insight into the ways industry megatrends are impacting the automotive cockpit of the future. As motorized vehicles become increasingly autonomous, connected and electrified, cementing their place in the shared mobility landscape, suppliers must now devise new strategies to achieve profitable growth. Traditional business models are losing ground to cross-functional collaboration partnerships, making it even more challenging to compete in the fast-moving connected, shared economy.
“It is disruptive for the entire automotive supply chain,” remarks Nathalie Saint Martin, Vice President, Group Purchasing, Faurecia. “We are all learning to evolve together and enhance the added value to our end-customers. The level of collaboration we are now seeing among suppliers is unprecedented.”

Other keynote speeches included market research consultancy Frost & Sullivan’s analysis of automotive trends in the data-driven economy, Testing, Inspection and Certification (TIC) specialist Bureau Veritas’ vision of data protection for automotive and a presentation of industry insights firm WardsAuto’s selection of top 10 best vehicle interiors of 2018.
The event enables a diverse array of supply chain players in automotive interiors to gather with their peers. "Events like this one are a great opportunity to talk face-to-face with other suppliers about industry-wide challenges,” notes Claus Lattner, Director Engineering, Process Management, CoC Cut Sew Wrap Global, Yanfeng Automotive Interiors. “It is not often we find ourselves in the same room to talk about consumer perception and the sustainability of leather, for instance."

“The event provided a great opportunity to interact with suppliers who have a direct impact on innovation in interior design and manufacturing,” said John Sousanis, Managing Director of Wards Intelligence.
For Javier Garcia, Senior Vice-President, Automotive Sales, Lectra, bringing together the automotive leather community is especially important as it rises to new business challenges stemming from continually changing consumer habits and the digitalization of manufacturing processes. “Connectivity and occupant comfort are increasing the amount of high-tech content in automotive interiors, but the up-market appeal of leather makes it a constant,” states Javier Garcia. “By fostering exchange, Lectra is doing its part to help the automotive leather ecosystem evolve to meet new consumer expectations.”

Intertextile Shanghai Home Textiles 2018 cooperates with the international trendsetter NellyRodiTM Agency again in offering the latest trend forecast to the home textile industry. Integrating different knowledge, inspirations and visions of trend evolution among the experts in the trend committee, three themes namely Caring Future, Crazy Future and Emo Future are established.
As the leading home textile trade fair in Asia, participants can always expect to see the latest items and discover the forthcoming market direction. To fulfil this, more than 1,000 suppliers from China and across the world will showcase a wide variety of products covering the whole spectrum of home furnishing, while the trend forecast, which is introduced during the show, provides both exhibitors and buyers with insight and guidance to stay ahead of the market.

This year, the show works together with the experienced international forecasting firm the NellyRodiTM Agency to form a trend committee consisting of different fields of expertise in order to gain the latest comprehension of international lifestyle forecasts. They have picked ‘FUTURE’ as the keyword of the season and three themes have been developed to illustrate this keyword.

• Caring Future: Now greener, more moral and socially oriented, creation draws from alternative imaginations to protect natural and cultural resources. It pulls inspiration from new eco-gestures and good altruist sense with a new credo – take care of nature and man
• Crazy Future: It plays on whimsical surrealism and petulance, the master of light-hearted insouciance. It plants a seed of madness in creation. Gaiety and fantasy amuse rational souls and titillate a taste for risk
• Emo Future: The need to console our cherished earth revives the emotion its immemorial beauty inspires. New nostalgia for the origin of things reconnects us to the essential. Neo-mysticism consecrates the elements and celebrates spiritual, benevolent nature. It inspires the perpetuation of the Traditions and rituals our ancestors practiced, in all their wisdom and humanism, to glorify nature 

These three themes will be demonstrated and discussed throughout the four-day fair in a series of events, while exhibitors’ products that resonate with the themes will be displayed in the Trend Area. Trend Forum tours will also take place, allowing show attendants to learn and discuss with designers and trend experts about the lifestyle trends.

Committee members with distinct specialties
The committee has contributed their expertise on retail experience, contract markets and new technologies, together with the sociological insights from an international consumer study in developing the themes. The following is an overview of the committee members.

• Mr Vincent Grégoire (France): Creative Director of NellyRodiTM Agency. Studied both interior and industrial design at the École Camondo in Paris, has been the artistic director and designer of exclusive products for the decorator Agnès Comar
• Mr Sun Yun (China): Partner and Design Director of Hangzhou Interior Architecture Design, founder of fashion brand HYSSOP Cornerstone
• Mrs Béatrice Brandt (France): Graduated from the Aix-en-Provence Graduate School of Management in Management Sciences with a major in marketing, 20 years of experience in marketing and innovation, now works as the CEO at Le Jacquard Français
• Mrs Hélène Pasteur (France): Purchasing Manager of Homeware/Leisure, Les Galeries Lafayette/BHV. Graduated from business school, entered Galeries Lafayette’s buying office in 1986 for the beauty, children’s wear, menswear, and accessory markets, managed the project that transformed BHV into BHV MARAIS from 2011 to 2014, now returns to the homeware department

More details of the trend programme will be released closer to the fair. The show will be held from 27 – 30 August at the National Exhibition and Convention Center in Shanghai

Exhibitors from eight countries have already confirmed to participate in the fair’s European Zone. They join an expected 500-plus total exhibitors from around the world. The 2018 edition of this biennial fair takes place from 4 – 6 September in halls N1 – N3 of the Shanghai New International Expo Centre.

While China retains its edge in terms of technical textiles and nonwovens production capabilities, in the eyes of Chinese buyers, European suppliers are still the leaders when it comes to technology and innovation. This was widely reported by European exhibitors at the previous edition in 2016 of Asia’s leading biennial trade event for the industry: Cinte Techtextil China.

“In the Chinese market, buyers want good quality products, so overseas companies, and products with recognised quality certifications, have a lot of potential,” Ms Ping Chen, General Manager of IBENA Shanghai Technical Textiles commented. “As a leading German company in the industry, our products are welcomed by many buyers at this fair. It is also important to be in the German Pavilion as this signals to buyers that we have quality products, and it attracts more attention.” Swiss firm Sanitized AG had the same experience. “As a Swiss company in the European Zone I believe it’s an advantage, as some local buyers have more confidence towards imported products,” Mr Steven Liu, Sales Manager said.

Other exhibitors commented on the long-term trends in the Chinese market. “There’s a definite shift to more high-quality machinery in China that isn’t affected by what’s happening in the overall economy. Moreover, there are opportunities for overseas suppliers as there is still a gap between us and what Chinese companies produce,” Dr Joachim Binnig, Vice President, Head of Development & Technology, Autefa Solutions Germany GmbH explained.

Mr Roger Zhang, Sales Manager for German firm J.H. Ziegler Nonwovens and New Materials commented: “Our products are mainly for high-end Chinese customers, such as BMW and Audi. The Chinese market has gradually matured, but the production capability for high-performance products which are energy efficient and eco-friendly is still developing, so there is a lot of space for overseas brands to develop here.”

European Zone highlights
This year’s European Zone will feature around 30 exhibitors from eight countries, including Austria, Belgium, the Czech Republic, France, Italy, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, the Czech Republic, Germany and Italy. Some of the exhibitor highlights in the European Zone include:

• Arkema (France): with brands including PMMA Altuglas, Rilsan, Pebax, Kynar PVDF and Bostik, they will present polymer resin for fibres and yarns, which apply to a wide range of applications, at the fair.
• Dakota Coating (Belgium): specialists in thermoplastic and thermosetting adhesives, their polymer products, based on polyethylene, polyolefin or mixtures, ethylene vinyl acetates, co-polyamides, polyurethanes and co-polyesters, are suitable for automotive, building, heat transfer and sound insulation uses.
• Lenzing Plastics (Austria): a new exhibitor at the fair, they are a leading manufacturer of polyolefin and fluoropolymer products, such as Thermoplast and PTFE products. One of their core competencies lies in the monoaxial stretching of films and filaments, and they offer special solutions in the fields of construction & insulation, medicine & hygiene, packaging and cables, as well as automotive and technical textiles. They will highlight their PROFILEN® PTFE product at the fair, and with its extreme durability and very smooth surface, it is highly valued in many niche applications in the technical and medical sectors.
• Protechnic (France): leading manufacturers of hot-melt adhesives and plastic printed films, they will showcase hot melt thermo-adhesive nets, webs and films at the fair.
• Trelleborg Coated Systems (Italy): another new exhibitor this edition, they produce high-performance, engineered coated fabrics. They offer a wide variety of substrates – from Kevlar® to silk – with a choice of weaving methods.

The automotive market is undergoing a period of great change. Global demand for light vehicles is increasing, but at slower rates than seen in previous years, and this is resulting in ever greater competition between carmakers. At the same time, the technological capabilities that can be offered are advancing rapidly. Areas such as autonomous driving, connectivity, interior comfort and the customization of vehicles in line with personal taste are becoming key ways that manufacturers can differentiate themselves and win market share. Indeed, automotive supplier Lear, recently unveiled a new biometric ‘smart’ seat, that tracks a driver’s health indicators.

These trends are having a knock-on effect for suppliers. For original equipment manufacturers (OEMs), being able to satisfy diverse consumer preferences is now considered more of a success factor than getting a vehicle to production faster than the competition. Across the automotive supply chain — and especially for those involved in the production of car seats and interiors — a growing emphasis on interior styling and luxury components has created new challenges that are further compounded by increasing cost pressures.

Although news coverage about the automotive industry tends to focus on such innovations as ‘driverless’ cars and ‘intelligent’ vehicles, one of the most farreaching changes occurring is this trend towards personalization: how automotive manufacturers are managing to make mass-produced items unique. Not only are manufacturers increasing the number of models they are offering but also the options available to a consumer per model. The Vauxhall Adam is a case in point: consumers can have more than 1 million different combinations when they order the car.

To cope with these challenges, suppliers will need to re-evaluate and improve their production processes. Within this context, the integration of smart solutions and services, and the replacement of production tools that are incompatible with connected factory concepts, will be vital. The combination of Software as a Service (SaaS) with the cloud is already opening up new horizons for innovation. Factories remain at the heart of the value chain. But Industry 4.0 is revolutionizing mass production, allowing more and more large-scale, personalized — and profitable — manufacturing, with greater quality and no added costs or delays.

As customer expectations reach new levels, it is especially important that suppliers in the automotive cutting value chain ramp up their transformation, adopting the technologies and services shaping Industry 4.0. For years, OEMs and suppliers alike have used foam and frames to develop patterns for producing seat covers in material or leather. The automotive industry was among the first to use sophisticated 3D computer-aided design (CAD) programs for the design and development of vehicles. But it has taken time for this technology to be used extensively for seat covers. Although 80% of fabric seating and interiors are currently cut digitally, only 10% of leather seats are cut using this method. The majority of suppliers of automotive leather seating still rely heavily on manual cutting equipment, such as die and roller presses.

To gain the agility and flexibility to remain relevant and competitive in a market that is dictating more change, variants, and faster reaction times, close cooperation between OEMs and suppliers is necessary. For if even one aspect of the process fails to provide sufficient flexibility, speed to market and consistent quality, then the entire chain will be impacted.

In such a complicated and fast-moving market, only the most adaptable and innovative companies will succeed. The solutions that form part of the Industry 4.0 framework will help give suppliers the capacity to adapt and thrive in this new environment. For more Information please find the complete White Paper attached.