From the Sector

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished sewn products, held its officer elections for fiscal year 2024 at its annual meeting April 9-11.
NCTO has elected Charles Heilig, President of Parkdale Mills, as Chairman; and Chuck Hall, President and CEO of Barnet, as Vice Chairman.

In addition to the appointment of a new chairman and vice chairman, NCTO elected chairs for each of its five councils. NCTO is comprised of five councils to ensure a broad representation of the industry supply chain. Each council has an allotted number of members who are elected to the association’s Board of Directors, in addition to the Executive Committee.

Elected as NCTO Chairman and Vice Chairman for 2024:

• Chairman – Charles Heilig, President of Parkdale Mills based in Gastonia, North Carolina, a leading American manufacturer of yarn and cotton consumer products.
• Vice Chairman – Chuck Hall, President and CEO of Barnet based in Spartanburg, South Carolina, a 125-year-old manufacturer of technical textiles.

Elected to the NCTO Board of Directors:

• Fiber Council – David Adkins of Lenzing; John Freeman of Nan Ya Plastics; and Melissa Stewart of The LYCRA Company
• Yarn Council – Justin Ferdinand of Kentwool; Peter Iliopoulos of Gildan; Eddie Ingle of Unifi; Eric Noe of Buhler Quality Yarns; Marvin Smith of Shuford Yarns; and Jay Todd of Service Thread
• Fabric and Home Products Council – David Smith of Milliken & Company; James McKinnon of Cotswold Industries; Blake Millinor of Valdese Weavers; Leib Oehmig of Glen Raven; Dan Russian of Sage Automotive Interiors; and Walter Spiegel of Standard Textile
• Finished Textiles and Apparel Products Council – Marisa Fumei-South of Two-One-Two New York (Alternate: Gabrielle Ferrara of Ferrara Manufacturing)
• Industry Support Council – Todd Bassett of Fi-Tech; Greg Duncan of American Truetzschler; and Jim Reed of YKK Corp.

Elected by their respective Councils to serve on the Executive Committee:
David Adkins, Lenzing; Eddie Ingle, Unifi; Marvin Smith, Shuford Yarns; David Smith, Milliken & Company; James McKinnon, Cotswold Industries; Marisa Fumei-South, Two-One-Two New York; Gabrielle Ferrara, Ferrara Manufacturing; and Todd Bassett, Fi-Tech.

NCTO Chairman Charles Heilig has elected additional executives to serve on the Executive Committee: Anderson Warlick of Parkdale Mills; Norman Chapman of Inman Mills; John Maness of Gildan; Amy Bircher Bruyn of MMI Textiles; and Jackie Ferrari of American Fashion Network.

Elected to chair the Councils:

• Fiber Council: David Adkins of Lenzing
• Yarn Council: Justin Ferdinand of Kentwool
• Fabric and Home Products Council: David Smith of Milliken & Company
• Finished Textiles and Apparel Products Council: Marisa Fumei-South of Two-One-Two New York.
• Industry Support Council: Todd Bassett of Fi-Tech

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.