From the Sector

all
Corona
Sustainable
Textile Business
Textile Machinery
Fibres, Yarns & Nonwovens
Technical Textiles
Interior Textiles
Clothing
Companies
Fairs
Trade
Associations
People
Archive
Reset
1402 results
The Oerlikon Nonwoven meltblown technology (c) Oerlikon
The Oerlikon Nonwoven meltblown technology
14.05.2020

Oerlikon Nonwoven deliveringmeltblown technology to FleeceforEurope

Protective masks for Europe
With FleeceforEurope and Lindenpartner, Düsseldorf-based Kloepfel Group purchasing consultancy and Berlin-based industrial consultancy Bechinger & Heymann Holding plan to manufacture and distribute up to 50 million protection class FFP1 through FFP3 respiratory masks a month exclusively for the European market from the beginning of fall. And the primary focus will be on quality.
With protective masks – including those used in operating rooms – this quality is provided above all by  virus-absorbing nonwovens. And these will be manufactured by ‘FleeceforEurope’ using an Oerlikon Nonwoven meltblown system.
But masks effectively protecting against infections can only be guaranteed with the right quality. A crucial factor in this is the inside of the mask. Because the nonwoven used in protection class FFP1 through FFP3 respiratory masks plays a decisive role.

Protective masks for Europe
With FleeceforEurope and Lindenpartner, Düsseldorf-based Kloepfel Group purchasing consultancy and Berlin-based industrial consultancy Bechinger & Heymann Holding plan to manufacture and distribute up to 50 million protection class FFP1 through FFP3 respiratory masks a month exclusively for the European market from the beginning of fall. And the primary focus will be on quality.
With protective masks – including those used in operating rooms – this quality is provided above all by  virus-absorbing nonwovens. And these will be manufactured by ‘FleeceforEurope’ using an Oerlikon Nonwoven meltblown system.
But masks effectively protecting against infections can only be guaranteed with the right quality. A crucial factor in this is the inside of the mask. Because the nonwoven used in protection class FFP1 through FFP3 respiratory masks plays a decisive role.
Here, the meltblown technology from Oerlikon Nonwoven will be deployed. In a special, patented process, the fibers laid into a nonwoven fabric during manufacture are subsequently electrostatically-charged, before the material is further processed downstream.

European market for protective masks with a promising future
Those responsible at Oerlikon Nonwoven and FleeceforEurope, which will primarily focus on producing high-end nonwovens, and Lindenpartner, which will manufacture and distribute the protective masks, are certain of one thing: the market for protective masks has a very promising long-term future in Europe.
What has been commonplace in Asia for many years now will also become normal in Europe. People will be increasingly wearing face masks when venturing out, in order to better protect themselves against health risks such as the current pandemic and also against increasing environmental pollution in the form of  fine particles and exhaust fumes in the future. A

Medical face masks from a vending machine
Mask producer Lindenpartner has already secured supplies of nonwovens and will be producing face masks for the European healthcare sector over the coming weeks. To fight the coronavirus pandemic, Lindenpartner is planning to install 100 self-service face mask vending machines in Germany over the next four weeks, positioning them in publicly-accessible places such as shopping centers and airports, for example.

More information:
corona virus respiratory masks Oerlikon nonwovens
Source:

Marketing, Corporate Communications & Public Affairs

print close
more
Start of 3-years Interreg cross-border project AACOMA is kicked-off (c) AMAC GmbH
AMAC-Standortkarte
13.05.2020

Start of 3-years Interreg cross-border project AACOMA is kicked-off

  • AACOMA - Accelerate advanced composite manufacturing
  • EMR Region Belgium, the Netherlands & Germany area hot spot for the future of lightweight materials and technologies

The Euregio Meuse-Rhine provides a huge potential with its many highly innovative, leading companies and especially SMEs which are active in the area of advanced material manufacturing in many industrial sectors, such as Automotive, Aerospace, Electronics, Building and Infrastructure, etc. The advanced material sector is growing, with a consolidated offer, ranging from raw material producers over technology development to production, research and development as well as industrial OEMs.

Interreg Euregio Meuse-Rhine invests EUR 96 million from the European Regional Development Fund (ERDF) in the period 2014-2020. Through the investments in cross-border projects, the European Union invests in the economic development, innovation, territorial development and social inclusion and education of this region.

Project

  • AACOMA - Accelerate advanced composite manufacturing
  • EMR Region Belgium, the Netherlands & Germany area hot spot for the future of lightweight materials and technologies

The Euregio Meuse-Rhine provides a huge potential with its many highly innovative, leading companies and especially SMEs which are active in the area of advanced material manufacturing in many industrial sectors, such as Automotive, Aerospace, Electronics, Building and Infrastructure, etc. The advanced material sector is growing, with a consolidated offer, ranging from raw material producers over technology development to production, research and development as well as industrial OEMs.

Interreg Euregio Meuse-Rhine invests EUR 96 million from the European Regional Development Fund (ERDF) in the period 2014-2020. Through the investments in cross-border projects, the European Union invests in the economic development, innovation, territorial development and social inclusion and education of this region.

Project

The Euregio Meuse-Rhine is a potential hot-spot for the further development of advanced material and process technologies. Technical Centers and Institutes around Aachen/Germany, Liège/Belgium and Eindhoven/The Netherlands were awarded with this new project AACOMA.

Innovative material design and advanced manufacturing provide large opportunities for SMEs. The AACOMA project kick-off took place in Aachen at the Campus of the RWTH University of technology in 1 Q 2020. The aim of the project, which is running for 3 years until 2023 with a budget of €3 Mio, is to connect SMEs with innovation hot-spots like institutes and technical centers.
Seven partners from all three regions will carry the project out: Centexbel is the project leader and gets support by University of Liège, Sirris and Flanders Make from Belgium, as well as Fontys University of Applied Science and AMIBM of Maastricht University in the Netherlands and AMAC in Germany.

Statements

Bernard Paquet, Project Coordinator from Centexbel/ Belgium stated:
“Centexbel, with a strong experience in textile and composites, will identify with its Interreg partners and an advisory board of international experts several demonstrators which will enable an accelerated advanced manufacturing of composite parts. This could include new materials and intermediates, high performance additives, bio-based products and new composites by additive manufacturing”.

Michael Effing, Managing Director of AMAC/ Germany said:
“The major goal of the project is to connect around 200 innovative SMEs with each other and establish the links to the world-class institutes in the EMR region. We will facilitate 6 roadshow events, addressing key topics like automated manufacturing, additive manufacturing or bio-based material systems combined with match making and training events. The first roadshow will be held on September 24, 2020 at the Aachen Campus of the RWTH University of Technology.”

Prof. Gunnar Seide from the AMIBM/The Netherlands continued:  
“Our AMIBM offers already an international master program on bio-based materials. The AACOMA project will be an important element for transborder research and will identify new players in the value chain coming from the EMR region. Innovative companies find markets for their new bio-based building blocks, chemicals and polymers. Their success stories and upcoming technological breakthroughs are needed for a sustainable future.”

 

(c) AMAC GmbH (c) AMAC GmbH
More information:
Euregio AACOMA AMAC AMIBM Centexbel RWTH Aachen ITA lightweight components automotive textiles aerospace market electronics building materials Infrastructure
Source:

Marketing and Communications Director AMAC GmbH

print close
more
Logo Paper Converting Machine Company
Logo Paper Converting Machine Company
11.05.2020

PCMC Signature Series (380V-s) wide-web press installed at J.J. Collins Printers

Modernized press eases digital printing conversion, signals new era for PCMC and RDP Marathon

Modernized press eases digital printing conversion, signals new era for PCMC and RDP Marathon

Paper Converting Machine Company (PCMC)—part of the Barry-Wehmiller Converting Solutions Platform announced the recent installation of the new Signature Series (380V-s) wide-web, high-speed offset  press at J.J. Collins Printers in Charleston, Illinois.
The 380V-s is the first in the series that is replacing the 380V press series, long highly regarded by printers in the longrun documents and high-end promotional graphics markets. The new design incorporates the latest in internet connectivity and touchscreen technology, and allows for easy integration with full or hybrid digital printing.
Designed by RDP Marathon, a recent acquisition of PCMC, the 380V-s represents PCMC’s expansion into providing equipment and services to the offset printing industry. Backed by PCMC’s global sales, manufacturing and service support, RDP Marathon will continue to maintain a sharp  focus on innovation. J.J. Collins Printers—already using an RDP Marathon model 260P blanket-to-blanket, heat-set press for its high-end commercial products—has been providing innovative print solutions  since 1878. Its commitment to using state-of-theart pre-press, press and bindery equipment has ensured the company's position as a leader in the print manufacturing industry.
In addition to the 380V-s, PCMC continues to develop new technologies and applications for a variety of print markets.

More information:
textile printer Paper Converting Machine Company PCMC
Source:

Paper Converting Machine Company

print close
more
06.05.2020

CHT teams up with HeiQ in fight against COVID-19

The corona pandemic continues to put a strain on health systems around the globe. Many places lack effective textile protective kit among others for their medical personnel. HeiQ, a Swiss specialty chemicals company, has developed antiviral and antibacterial protective kit that is quickly effective against Coronaviruses (229E), as confirmed in wide-ranging studies. In cooperation with HeiQ, the CHT Group is supplying this technology to the market to help decrease the global shortage in protective wear.

A wide number of studies have proven that viruses and bacteria can remain active on textile surfaces for a longer period. The SARS-COV-2 virus, which causes the COVID-19 disease, can stay active on a textile for up to two days and therefore be infectious. Shortages in textile protective kit create a high risk for medical personnel who are in contact with COVID-19 patients: often, doctors and nurses cannot change their protective masks and clothing as frequently as would be necessary in order to adhere to hygiene rules and to prevent the spreading of the virus.

The corona pandemic continues to put a strain on health systems around the globe. Many places lack effective textile protective kit among others for their medical personnel. HeiQ, a Swiss specialty chemicals company, has developed antiviral and antibacterial protective kit that is quickly effective against Coronaviruses (229E), as confirmed in wide-ranging studies. In cooperation with HeiQ, the CHT Group is supplying this technology to the market to help decrease the global shortage in protective wear.

A wide number of studies have proven that viruses and bacteria can remain active on textile surfaces for a longer period. The SARS-COV-2 virus, which causes the COVID-19 disease, can stay active on a textile for up to two days and therefore be infectious. Shortages in textile protective kit create a high risk for medical personnel who are in contact with COVID-19 patients: often, doctors and nurses cannot change their protective masks and clothing as frequently as would be necessary in order to adhere to hygiene rules and to prevent the spreading of the virus.

The HeiQ Viroblock NPJ03 that has been developed by HeiQ is a new technology that is also effective against Coronaviruses (229E) thanks to its antibacterial and antiviral properties. Comprehensive studies have demonstrated the kit‘s effectiveness. A combination of silver salts with a vesicle technology deactivates bacteria and viruses on textile surfaces within a few minutes and renders the bacteria and viruses harmless. Textiles equipped in this way reduce the rate of infection by 99.99%, which stops the transmission and the spread of bacteria and viruses through textiles.

Viroblock can be used on all types of fibers – not only for protective kit and masks, but also for work clothing, bed linen, towels and home textiles. The kit is wash-resistant and still highly effective after 30 standard wash processes.

More information:
HeiQ CHT Group corona virus
Source:

CHT Gruppe

print close
more
ITA Academy General Manager Nicolina Praß (c) ITA Academy
05.05.2020

Online Remote Trainings an der ITA Academy

Digitisation, Industry 4.0 and the expertise in this field should make fit for the working world of tomorrow. Nevertheless, these important topics are pushed into the back-ground in times of Corona. says ITA Academy ofefrs now online remote trainings for home-office: "Digital Transformation", the "Textile Summer School" and "Basics of Textile Technology"

The "Textile Summer School" will be held from 13 - 15 May and the training course "Basics of textile technology" from 28 - 30 July. They will impart expertise about the entire textile process chain. Starting with fibre science, through yarn and surface production to finishing and textile testing methods, all essential topics are cov-ered.
Both training courses are therefore suitable for interested employees and trainees from all areas of the company along the textile chain who wish to acquire or refresh specialist knowledge. This also gives lateral entrants and specialists with training from outside the indus-try the opportunity to enter the world of textiles more easily.

Digitisation, Industry 4.0 and the expertise in this field should make fit for the working world of tomorrow. Nevertheless, these important topics are pushed into the back-ground in times of Corona. says ITA Academy ofefrs now online remote trainings for home-office: "Digital Transformation", the "Textile Summer School" and "Basics of Textile Technology"

The "Textile Summer School" will be held from 13 - 15 May and the training course "Basics of textile technology" from 28 - 30 July. They will impart expertise about the entire textile process chain. Starting with fibre science, through yarn and surface production to finishing and textile testing methods, all essential topics are cov-ered.
Both training courses are therefore suitable for interested employees and trainees from all areas of the company along the textile chain who wish to acquire or refresh specialist knowledge. This also gives lateral entrants and specialists with training from outside the indus-try the opportunity to enter the world of textiles more easily.

The "Textile Summer School" addresses both international and national customers. A good knowledge of English is required for participation. The course "Basics of Textile Technology" will be held in German.

Source:

ITA Academy

print close
more
Logo oerlikon
Oerlikon expands labatory capacities
30.04.2020

Oerlikon Nonwoven expands it laboratory nonwovens production capacities

Materials for in excess of one million protective masks
Within the context of supporting the critical infrastructure in Germany, Oerlikon Nonwoven immediately began converting its laboratory systems in Neumünster to manufacture nonwovens at the end of March. With this, only small local businesses and companies were initially supported in the manufacture of oronasal masks.
With the laboratory system at the R&D Center material for more than one million protective masks a month can be manufactured.

The laboratory has meanwhile run out of raw materials and new orders for replacement materials had to be placed before Easter – with current delivery times of approx. 3 weeks. This will allow production to be resumed, and even considerably expanded, in May.
The laboratory system is now once again being deployed to produce nonwovens that will be used to make more than million face masks / oronasal masks a month. “We will not be manufacturing the masks ourselves. We have meanwhile found both corresponding partner companies and also private individuals demanding nonwovens”, adds Andreas Frisch, commenting on the developments.

Materials for in excess of one million protective masks
Within the context of supporting the critical infrastructure in Germany, Oerlikon Nonwoven immediately began converting its laboratory systems in Neumünster to manufacture nonwovens at the end of March. With this, only small local businesses and companies were initially supported in the manufacture of oronasal masks.
With the laboratory system at the R&D Center material for more than one million protective masks a month can be manufactured.

The laboratory has meanwhile run out of raw materials and new orders for replacement materials had to be placed before Easter – with current delivery times of approx. 3 weeks. This will allow production to be resumed, and even considerably expanded, in May.
The laboratory system is now once again being deployed to produce nonwovens that will be used to make more than million face masks / oronasal masks a month. “We will not be manufacturing the masks ourselves. We have meanwhile found both corresponding partner companies and also private individuals demanding nonwovens”, adds Andreas Frisch, commenting on the developments.

Boom in orders
Furthermore, Oerlikon Nonwoven has also fired up the production of the machines and systems used for its meltblown technology. The demand from Germany, Europe and the rest of the world has quickly
secured the company a high in orders..
We will be commissioning the first meltblown system at the site of a leading Western European nonwovens producers in the second quarter of 2020. The capacities for respiratory masks available in Europe to date are predominantly manufactured on Oerlikon
Nonwoven systems.

More information:
corona virus Oerlikon Oerlikon Nonwoven face masks
Source:

Marketing, Corporate Communications & Public Affairs

print close
more
Flight Design selects Hexcel’s HexPly® M79 Carbon Fiber Prepregs for Ultralight Aircraft (c) Hexcel Corporation
30.04.2020

Flight Design selects Hexcel’s HexPly® M79 Carbon Fiber Prepregs for Ultralight Aircraft

STAMFORD – German ultralight aircraft specialist Flight Design has chosen Hexcel as its key supplier adopting low-temperature curing prepreg into its aircraft production. Hexcel’s HexPly® M79 Carbon Fiber prepregs deliver a more consistent final product by ensuring constant material quality and processing parameters and produce a lighter and stronger aircraft at a more competitive overall cost.

Flight Design has always relied heavily on composites for its aircrafts’ ultralight construction and turned to long-term composite materials partner Lange + Ritter, part of Hexcel’s European distribution network, when they began searching for a prepreg material solution. Hexcel and Lange + Ritter created several new product codes specifically for Flight Design and then supplied materials for initial handling trials and prototyping. Hexcel’s HexPly M79 low temperature curing out of autoclave solution was first used in the new F2 prototype. As part of its material supply package, Lange + Ritter also sent a team for on-site training and technical support, allowing the Flight Design production team to get up to speed with prepreg as quickly as possible.

STAMFORD – German ultralight aircraft specialist Flight Design has chosen Hexcel as its key supplier adopting low-temperature curing prepreg into its aircraft production. Hexcel’s HexPly® M79 Carbon Fiber prepregs deliver a more consistent final product by ensuring constant material quality and processing parameters and produce a lighter and stronger aircraft at a more competitive overall cost.

Flight Design has always relied heavily on composites for its aircrafts’ ultralight construction and turned to long-term composite materials partner Lange + Ritter, part of Hexcel’s European distribution network, when they began searching for a prepreg material solution. Hexcel and Lange + Ritter created several new product codes specifically for Flight Design and then supplied materials for initial handling trials and prototyping. Hexcel’s HexPly M79 low temperature curing out of autoclave solution was first used in the new F2 prototype. As part of its material supply package, Lange + Ritter also sent a team for on-site training and technical support, allowing the Flight Design production team to get up to speed with prepreg as quickly as possible.

HexPly M79 prepregs can be cured at temperatures as low as 70˚C for eight hours or 80˚C for four hours, reducing tooling costs and increasing build rates. When combined with Hexcel’s innovative air venting Grid Technology, HexPly M79 UD carbon tapes can also be laminated with reduced debulking steps to produce void contents <1% irrespective of laminate thickness. With consistently low void contents and improved mechanical properties, designers and engineers are able to further optimize highly loaded composite aerostructures.

As more and more of its composite aircraft parts are transferred to prepreg technology, Flight Design is seeing the benefits of its switch to HexPly M79. Lay-up is cleaner and more precise, low temperature oven curing is quick and energy efficient, and the manufacturing process consistently outputs exceptionally high-quality laminates and components. The long-term strategy is to integrate HexPly M79 across the range, with Hexcel materials lightening the ultralight aircraft at Flight Design even further.

“The materials and technology package from Hexcel and Lange + Ritter has been a big success for us at Flight Design,” comments Daniel Gunther, Managing Director at Flight Design. “When we took the decision to switch to prepreg, we looked at many options but only Hexcel and Lange + Ritter could offer us low temperature out-of-autoclave (OOA) curing, globally respected material quality and the customer service levels we were searching for.”

Flight Design selects Hexcel’s HexPly® M79 Carbon Fiber Prepregs for Ultralight Aircraft (c) Hexcel Corporation
More information:
Aircraft Composites Hexcel’s HexPly® Flight Design
Source:

Hexcel Corporation

print close
more
Strategic partneship between HUNTSMAN and PPJ
Logo HUNTSMAN and PPJ
29.04.2020

HUNTSMAN TEXTILE EFFECTS and PPJ to tap growth potential

Huntsman Textile Effects and Phong Phu International (PPJ) today announced a strategic partnership agreement that aims to promote PPJ’s growth in Vietnam as a manufacturer of  textiles and garments for brands and retailers all over the world.
Vietnam-based PPJ will leverage technical support from Huntsman Textile Effects to enhance its manufacturing processes across its denim/twill and knit mills, and develop new products that deliver sustainability along with advanced performance, protection and comfort.

Huntsman Textile Effects and Phong Phu International (PPJ) today announced a strategic partnership agreement that aims to promote PPJ’s growth in Vietnam as a manufacturer of  textiles and garments for brands and retailers all over the world.
Vietnam-based PPJ will leverage technical support from Huntsman Textile Effects to enhance its manufacturing processes across its denim/twill and knit mills, and develop new products that deliver sustainability along with advanced performance, protection and comfort.

The development of workwear and textile for the American, European and Japan markets  will be a key project for the two partners. They will use advanced Huntsman Textile Effects barrier solutions such as PHOBOL®, PHOBOTEX® and ZELAN™, along with other finishing effects.Huntsman Textile Effects will additionally support PPJ to promote its Sinnika Fabric collection, leveraging Huntsman’s advanced dyeing technology and finishing effects to deliver high-value market-focused solutions to brands and retailers.

The new agreement strengthens a  relationship that has already seen PPJ develop denim, knitwear and woven fabrics and garments using Huntsman Textile Effects technologies including AVITERA® SE dyes, NOVACRON® Atlantic dyes and High IQ® intelligent effects.
 

More information:
Huntsman Huntsman Textile Effects Phong Phu International strategic partnership
Source:

Huntsman Textile Effects

print close
more
CAALO SS2020 collection with Bemberg™ lining (c) CAALO Bemberg™
CAALO SS2020 collection with Bemberg™ lining
29.04.2020

Bemberg™ key-statement for sustainability

  • Bemberg™ presents a great deal of novelties with a true key-statement for sustainability: Let’s Make it Circular!
  • The lifespan of Bemberg™’s regenerated cellulose fiber Cupro derived from cotton is fully circular: from the source to manufacturing.


“Sustainability is the founding pillar of our company,” says SHUNSUKE SATO, sales manager of Bemberg™ by Asahi Kasei. “Indeed, the smart fiber is made from a cotton linter which is pre-consumer material, a natural derived source, that doesn’t deplete forestry resources”.

In Bemberg™’s production the whole sustainable closed-loop process is supported by the LCA study, signed by ICEA (Istituto per la Certificazione Etica e Ambientale) and validated by President of Ecoinnovazione Paolo Masoni ex Research Director of ENEA (Ente per le Nuove tecnologie, l’Energia e l’Ambiente).

  • Bemberg™ presents a great deal of novelties with a true key-statement for sustainability: Let’s Make it Circular!
  • The lifespan of Bemberg™’s regenerated cellulose fiber Cupro derived from cotton is fully circular: from the source to manufacturing.


“Sustainability is the founding pillar of our company,” says SHUNSUKE SATO, sales manager of Bemberg™ by Asahi Kasei. “Indeed, the smart fiber is made from a cotton linter which is pre-consumer material, a natural derived source, that doesn’t deplete forestry resources”.

In Bemberg™’s production the whole sustainable closed-loop process is supported by the LCA study, signed by ICEA (Istituto per la Certificazione Etica e Ambientale) and validated by President of Ecoinnovazione Paolo Masoni ex Research Director of ENEA (Ente per le Nuove tecnologie, l’Energia e l’Ambiente).

While recyclability is granted by the Global Recycle Standard - GRS certification by the renown Textile Exchange (an influential guarantee that involves the whole production process and supply chain behind the company’s smart yarns), Bemberg™ yarns are also entirely biodegradable and ecotoxicity-free - meaning that at the end of their life circle they break down into the environment leaving no trace in terms of toxic substances as attested by the Innovhub-SSI report.

A special focus deserves Velutine™ Evo, the new fibrillation finishing technology for Bemberg™ fabrics only that guarantees another level of sustainable benefits without sacrificing the Bemberg™ amazing and unique touch. As part of the company’s continuous innovation, Velutine™ Evo brings better environmental, energy and water profiles for the benefit of Bemberg™ partners in the manufacture of their ranges.
The sustainable achievements of the new finishing technology have been measured by LCA - Life Cycle Assessment study by ICEA and proved to guarantee environmental benefits such as -16.5% of greenhouses gas emissions and -21% of overall consumption of energy resources. On top of that Velutine™ Evo means also -20.5% of electricity savings, -15.9% of steam production and -19.5% of water consumption.

The first Bemberg™ partner to present a commercial collection enriched by Velutine™ Evo is the Portuguese Matias & Araújo. With an innovative spirit, dynamism and a determined entrepreneurial spirit, the company is a leading knitwear producer for the textile industry.

Bemberg™ collaborated also with the premium brand CAALO that is making its mark in the outerwear market with its Sustainably produced Functional-Luxury proposal. For SS20, CAALO uses Bemberg™ lining because of the sustainability properties and it’s unique colour.

CAALO uses as much eco-friendly and sustainable materials as possible without compromising on design or quality. This Bemberg™ lining was a perfect fit. This versatile blazer features a removable hood, hidden welt pockets, button closure, and removable cargo pockets.

 

CAALO SS2020 collection with Bemberg™ lining (c) CAALO Bemberg™ CAALO SS2020 collection with Bemberg™ lining (c) CAALO Bemberg™ CAALO SS2020 collection with Bemberg™ lining (c) CAALO Bemberg™
Source:

GB Network

print close
more
Logo monforts
Logo monforts
21.04.2020

Monforts: Industrial-scale testing for new PPE finishes

In the current fight against Covid-19, a number of formulators of textile finishing chemicals have rushed out new antiviral and antimicrobial treatments intended for PPE (personal protective equipment) such as face masks and medical gowns and drapes.

These finishing chemicals have naturally already been thoroughly tested in laboratories and their effectiveness verified at laboratory or pilot scale. However, they are new to many manufacturers of textiles and nonwovens now preparing to use them on an industrial level.

A lot of companies changed, due to the current situation their usual manufacturing programmes to the production of PPE items. “We have experts on hand at our operational Advanced Technology Centre (ATC) here in Germany, to help any of our customers to rapidly transition to new finishing techniques and treatments they may not be familiar with, and to run trials on their behalf, should they require this assistance.”, states the vice president of Monforts, Klaus Heinrichs.

In the current fight against Covid-19, a number of formulators of textile finishing chemicals have rushed out new antiviral and antimicrobial treatments intended for PPE (personal protective equipment) such as face masks and medical gowns and drapes.

These finishing chemicals have naturally already been thoroughly tested in laboratories and their effectiveness verified at laboratory or pilot scale. However, they are new to many manufacturers of textiles and nonwovens now preparing to use them on an industrial level.

A lot of companies changed, due to the current situation their usual manufacturing programmes to the production of PPE items. “We have experts on hand at our operational Advanced Technology Centre (ATC) here in Germany, to help any of our customers to rapidly transition to new finishing techniques and treatments they may not be familiar with, and to run trials on their behalf, should they require this assistance.”, states the vice president of Monforts, Klaus Heinrichs.

The three lines at the ATC situated at the Monforts HQ in Mönchengladbach, are of a true industrial scale and trialling new products on them goes beyond lab or pilot plant testing to rapidly identify any problems that might occur once full production is underway.

 

More information:
Monforts corona virus
Source:

AWOL Media

print close
more
16.04.2020

SANITIZED AG aids measures to promote hygiene management during the coronavirus pandemic

  • Antiviral properties of Sanitized® products on synthetics validated

Tests conducted by independent laboratories have now confirmed that a treatment with Sanitized® T 99-19 and Sanitized® T 11-15 reduces the viral load on PES textiles by
up to 99 %.

Swiss company SANITIZED AG announces the validation from impartial labs that Sanitized®T 99-19 and Sanitized®T 11-15 are also effective against viruses (in accordance with ISO 18184:2019). Tests were performed using a feline coronavirus with structures and mechanisms reminiscent of SARS-Cov2. Patented technology featuring an ammonium silicate compound  is employed in Sanitized®T 99-19 and Sanitized®T 11-15 utilizes tried and tested silver technology.

These additives are the perfect tool for an antiviral and antibacterial treatment of face masks, protective professional medical clothing, bed linens, or mattresses. The formulation of both products remains completely untouched, thus ensuring that it will continue to offer outstanding protection against bacteria.

  • Antiviral properties of Sanitized® products on synthetics validated

Tests conducted by independent laboratories have now confirmed that a treatment with Sanitized® T 99-19 and Sanitized® T 11-15 reduces the viral load on PES textiles by
up to 99 %.

Swiss company SANITIZED AG announces the validation from impartial labs that Sanitized®T 99-19 and Sanitized®T 11-15 are also effective against viruses (in accordance with ISO 18184:2019). Tests were performed using a feline coronavirus with structures and mechanisms reminiscent of SARS-Cov2. Patented technology featuring an ammonium silicate compound  is employed in Sanitized®T 99-19 and Sanitized®T 11-15 utilizes tried and tested silver technology.

These additives are the perfect tool for an antiviral and antibacterial treatment of face masks, protective professional medical clothing, bed linens, or mattresses. The formulation of both products remains completely untouched, thus ensuring that it will continue to offer outstanding protection against bacteria.

Before a final product’s antiviral properties can be publicly promoted, viral tests must be performed in specialized laboratories. Compliance with local legal regulations is essential here. SANITIZED AG explicitly points out that this is standard procedure and has composed a preliminary Guide for Treating PPE (personal protective equipment) with biocide products.

Guide Link: https://campaign.sanitized.com/en/treatment-of-ppe-with-biocidal-products

More information:
Coronavirus
Source:

PR-Büro Heinhöfer

print close
more
Logo Sanitized
Logo Sanitized
16.04.2020

Sanitized: Antiviral properties of Sanitized® products on synthetics

Tests conducted by independent laboratories have now confirmed that a treatment with Sanitized® T 99-19 and Sanitized® T 11-15 reduces the viral load on PES textiles by up to 99 %.

Swiss company SANITIZED AG celebrates validation from impartial labs that Sanitized®T 99-19 and Sanitized®T 11-15 are also effective against viruses (in accordance with ISO 18184:2019).
Tests were performed using a feline coronavirus with structures and mechanisms reminiscent of SARS-Cov2.

Patented technology featuring an ammonium silicate compound is employed in Sanitized®T 99-19 and Sanitized®T 11-15 utilizes tried and tested silver technology. These additives are the perfect tool for an antiviral and antibacterial treatment of face masks, protective professional medical clothing, bed linens, or mattresses.
The formulation of both products remains completely untouched, thus ensuring that it will continue to offer outstanding protection against bacteria.

Tests conducted by independent laboratories have now confirmed that a treatment with Sanitized® T 99-19 and Sanitized® T 11-15 reduces the viral load on PES textiles by up to 99 %.

Swiss company SANITIZED AG celebrates validation from impartial labs that Sanitized®T 99-19 and Sanitized®T 11-15 are also effective against viruses (in accordance with ISO 18184:2019).
Tests were performed using a feline coronavirus with structures and mechanisms reminiscent of SARS-Cov2.

Patented technology featuring an ammonium silicate compound is employed in Sanitized®T 99-19 and Sanitized®T 11-15 utilizes tried and tested silver technology. These additives are the perfect tool for an antiviral and antibacterial treatment of face masks, protective professional medical clothing, bed linens, or mattresses.
The formulation of both products remains completely untouched, thus ensuring that it will continue to offer outstanding protection against bacteria.

Before a final product’s antiviral properties can be publicly promoted, viral tests must be performed in specialized laboratories. Compliance with local legal regulations is essential here. SANITIZED AG explicitly points out that this is standard procedure and has composed a preliminary Guide for Treating PPE

SANITIZED AG has been supporting the work of hygienists in hospitals, doctor’s offices, nursing and care facilities for many years with its antimicrobial - and now also antiviral - additives used to enhance the
functionality of textiles and polymers. The reduction of bacteria and viruses is a feasible way to help stem the spread of infections including MRSA.

More information:
Sanitized AG corona virus antiviral
Source:

PR-Büro Heinhöfer

print close
more
Oerlikon Barmag
Oerlikon Barmag mit neuer Technologie
09.04.2020

e-save: new technology helps to save energy

POY process now even more energy-efficient

Following several years of development with partner Siemens, Oerlikon Barmag kicked off serial production of its new drive unit for POY systems at the beginning of the year. The new component makes stands out above all with regards to energy efficiency.

The requirements-specific design of the compact inverter unit ensures functional optimization of the winder’s control functions. And the new component is used in conjunction with a performance-optimized chuck motor. This means that energy savings of up to 3% can be achieved for the take-up.

Further customer benefits include a significant reduction in cables and cable trays. The reduced number of switching cabinets also saves space. Following intensive field tests at two well-known customers last year, the compact inverter unit was finally released for serial manufacture at the beginning of 2020.
There are plans to deliver several thousand positions with the new component this year.

POY process now even more energy-efficient

Following several years of development with partner Siemens, Oerlikon Barmag kicked off serial production of its new drive unit for POY systems at the beginning of the year. The new component makes stands out above all with regards to energy efficiency.

The requirements-specific design of the compact inverter unit ensures functional optimization of the winder’s control functions. And the new component is used in conjunction with a performance-optimized chuck motor. This means that energy savings of up to 3% can be achieved for the take-up.

Further customer benefits include a significant reduction in cables and cable trays. The reduced number of switching cabinets also saves space. Following intensive field tests at two well-known customers last year, the compact inverter unit was finally released for serial manufacture at the beginning of 2020.
There are plans to deliver several thousand positions with the new component this year.

More information:
Oerlikon Barmag Energieeinsparung
Source:

Oerlikon Textile GmbH & Co. KG

print close
more
Logos of the participating companies
Gerber PPE Task Force
08.04.2020

A&E and Burlington participate in the Gerber PPE Task Force

Elevate Textiles, a global provider of advanced, high quality products and mission critical textile solutions is pleased to participate in the recently launched Gerber PPE Task Force. This industry-wide effort combines resources and expertise to support manufacturing operations and brands as they increase their production or transition their operations to produce personal protective equipment in the fight against COVID-19.
Elevate’s Burlington, American & Efird (A&E), and Gütermann brands provide critical barrier fabric and thread components used in the manufacturing of lifesaving PPE products including masks, isolation gowns and other medical garments.

"The only way to be successful during this difficult situation is to join forces and support one another," said Lenny Marano, VP of Product Management & Marketing for Automation Systems at Gerber Technology. "We are proud to have a global network of partners to support PPE production so that it's more widely available."

Elevate Textiles, a global provider of advanced, high quality products and mission critical textile solutions is pleased to participate in the recently launched Gerber PPE Task Force. This industry-wide effort combines resources and expertise to support manufacturing operations and brands as they increase their production or transition their operations to produce personal protective equipment in the fight against COVID-19.
Elevate’s Burlington, American & Efird (A&E), and Gütermann brands provide critical barrier fabric and thread components used in the manufacturing of lifesaving PPE products including masks, isolation gowns and other medical garments.

"The only way to be successful during this difficult situation is to join forces and support one another," said Lenny Marano, VP of Product Management & Marketing for Automation Systems at Gerber Technology. "We are proud to have a global network of partners to support PPE production so that it's more widely available."

For over 40 years, Burlington has been in the Medical business manufacturing fabrics for use in operating theaters such as surgeon’s gowns, isolation gowns, sterilization wrapper packs, drapes, scrubs and lab coats. The Maxima® collection of fabrics is useful for reusable isolation and surgical gowns and meets AAMI standards for Levels 1-4 and FDA standards.

More information:
corona virus face masks Elevate Textiles, Inc. Gütermann
Source:

American & Efird

print close
more
(c) PFAFF Industriesysteme und Maschinen GmbH
03.04.2020

Andreas Tobisch new “Head of Sales” of the PFAFF Industriesysteme und Maschinen GmbH

Effective from April 1st, 2020 Andreas Tobisch takes over the position “Head of sales” of the PFAFF Industriesysteme und Maschinen GmbH. The 60-year-old assumes the responsibility for sales activities at the PFAFF location in Kaiserslautern/Germany.

Andreas Tobisch started his career at PFAFF in 1981, where he worked in sales at various locations in Germany. In the mid-1990s, he switched to an international sewing machine dealer as sales manager for almost 10 years before he started successfully his own business in the sewing machine industry together with a partner (both managing directors). At the end of 2014, PFAFF Industriesysteme und Maschinen GmbH was able to win him back for a position in the growth area of "welding technology", where he was most recently the responsible segment manager.

Effective from April 1st, 2020 Andreas Tobisch takes over the position “Head of sales” of the PFAFF Industriesysteme und Maschinen GmbH. The 60-year-old assumes the responsibility for sales activities at the PFAFF location in Kaiserslautern/Germany.

Andreas Tobisch started his career at PFAFF in 1981, where he worked in sales at various locations in Germany. In the mid-1990s, he switched to an international sewing machine dealer as sales manager for almost 10 years before he started successfully his own business in the sewing machine industry together with a partner (both managing directors). At the end of 2014, PFAFF Industriesysteme und Maschinen GmbH was able to win him back for a position in the growth area of "welding technology", where he was most recently the responsible segment manager.

Together with the management and his sales team, Andreas Tobisch will consistently and successfully implement the sales, product and marketing strategy of PFAFF Industriesysteme und Maschinen GmbH. One focus of his work is to expand and strengthen the sales activities of industrial sewing machines, welding machines and automatic sewing units from PFAFF INDUSTRIAL in Kaiserslautern/Germany.

More information:
Pfaff
Source:

PFAFF Industriesysteme und Maschinen GmbH

print close
more
Meltblown Vliesstoffanlagen von Oerlikon Nonwoven (c) Oerlikon Manmade fibers
Meltblown Vliesstoffanlagen von Oerlikon Nonwoven
02.04.2020

Oerlikon Nonwoven large-scale meltblown sold to Asia

a leading Asian large-scale manufacturer of manmade fibers and polymers has invested in a new Oerlikon Nonwoven meltblown system. The recently-signed contract comprises a 2-beam system for manufacturing filtration nonwovens – predominantly for medical products such as face masks – with a nominal capacity of up to 1,200 tons of nonwovens a year. The commercial production launch has been scheduled for the fourth quarter of 2020.

The 2-beam system has an operating width of 1.6 meters and is equipped with the new patented Oerlikon Nonwoven electro-charging unit. The Oerlikon Nonwoven meltblown technology is recognized by the market as being the technically most efficient method for producing highly-separating filter media made from manmade fibers, particularly in conjunction with electrostatic charging and with extremely low-pressure loss. Electro-charging the filter nonwovens allows the manufacture of sophisticated EPA- and HEPA-class filter media as well as media that comply with the requirements of N95-, FFP2- and FFP3-class respiratory masks.

a leading Asian large-scale manufacturer of manmade fibers and polymers has invested in a new Oerlikon Nonwoven meltblown system. The recently-signed contract comprises a 2-beam system for manufacturing filtration nonwovens – predominantly for medical products such as face masks – with a nominal capacity of up to 1,200 tons of nonwovens a year. The commercial production launch has been scheduled for the fourth quarter of 2020.

The 2-beam system has an operating width of 1.6 meters and is equipped with the new patented Oerlikon Nonwoven electro-charging unit. The Oerlikon Nonwoven meltblown technology is recognized by the market as being the technically most efficient method for producing highly-separating filter media made from manmade fibers, particularly in conjunction with electrostatic charging and with extremely low-pressure loss. Electro-charging the filter nonwovens allows the manufacture of sophisticated EPA- and HEPA-class filter media as well as media that comply with the requirements of N95-, FFP2- and FFP3-class respiratory masks.

The demand for filtration nonwovens for medical applications has risen tremendously across the globe since the outbreak of the Sars-CoV-2 (coronavirus) epidemic, presenting all manufacturers with huge challenges. A meltblown system will be commissioning at the site of a leading Western European nonwovens producers as early as the second quarter of 2020. This system will be deployed exclusively in the manufacture of nonwovens for respiratory masks.

Due to the current state of emergency with regards to the local supply of face masks, Oerlikon Nonwoven is currently using its own laboratory system to produce electrostatically-charged filter media which are being sent to local small businesses and companies for the manufacture of face masks. 

 

More information:
Oerlikon Nonwoven
Source:

Oerlikon Manmade fibers

print close
more
Mimaki 3DGD-1800 3D printer (c) Mimaki
Mimaki 3DGD-1800 3D printer
24.03.2020

Mimaki Expands Portfolio with Large-Scale 3D Printer

New Mimaki 3DGD-1800 3D printer boasts ground-breaking production speeds and transforms production of large-sized objects, opening up a wide range of new possible applications across industries from sign and display to manufacturing.

Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, today announces the launch of the new Mimaki 3DGD-1800 3D printer, facilitating large-scale production up to three times faster than with conventional Fused Filament Fabrication (FFF) type 3D printers.

New Mimaki 3DGD-1800 3D printer boasts ground-breaking production speeds and transforms production of large-sized objects, opening up a wide range of new possible applications across industries from sign and display to manufacturing.

Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, today announces the launch of the new Mimaki 3DGD-1800 3D printer, facilitating large-scale production up to three times faster than with conventional Fused Filament Fabrication (FFF) type 3D printers. The Mimaki 3DGD-1800 3D printer connects the company’s 2D printing expertise and 3D technology innovations, providing customers with a cost-effective, total solution for 3D sign and display applications.

Capable of producing objects up to 1.8 metres tall in just seven hours – with its assembly-based design allowing for the creation of even larger designs – the innovative 3D printing system boasts a number of clever time- and cost-saving features, including dual-head configuration to enable the simultaneous output of two structures. The Mimaki 3DGD-1800 also facilitates the production of support-free hollowed structures, further streamlining production whilst allowing for increased portability and the possible addition of interior illuminations. The technology will open up a diverse range of potential applications, from signage, events and creative art through to interior design. Customers can utilise Mimaki’s extensive portfolio of 2D print solutions to cost-effectively decorate these applications, opening doors to a range of new products that combine creativity and innovation with Mimaki’s tried and tested vibrant, high-quality results.

Commercially available from April 1, 2020, the new Mimaki 3DGD-1800 is set to revolutionise the way in which large-sized objects are created, enabling a switch from costly and time-consuming conventional handcrafting methods which require significant expertise, to effortless, high-speed production utilising 3D data. 

More information:
Mimaki
Source:

Mimaki

print close
more
Lenzing Logo (c) Lenzing
Lenzing Logo
20.03.2020

Lenzing Group’s Sustainability Report for 2019 published

  • First fiber producer to have an approved science-based target – CO2 neutrality by 2050
  • Breakthrough in REFIBRA™ technology – worn textiles can also be used as fiber raw material
  • Pioneer in the introduction of blockchain technology for fiber recognition
  • On track to meet all sustainability targets

Lenzing – Just ahead of the “Day of Forests ” on March 21, which the FAO (Food and Agricultural Organization of the United Nations) introduced in the 1970s in response to global deforestation, the Lenzing Group presents its Sustainability Report 2019. This sets out how the company is actively dealing with the global challenges.

Lenzing produces fibers from the renewable raw material wood and is well known among its customers and partners in the global textile and nonwoven fabric industry for the clear position it takes as a sustainable producer. It is no accident that the new report is appearing on the International Day of Forests. Lenzing’s sustainable practices in procurement, especially for wood and pulp, were once again ranked as leading in the 2019 reporting year (Hot Button Report).

  • First fiber producer to have an approved science-based target – CO2 neutrality by 2050
  • Breakthrough in REFIBRA™ technology – worn textiles can also be used as fiber raw material
  • Pioneer in the introduction of blockchain technology for fiber recognition
  • On track to meet all sustainability targets

Lenzing – Just ahead of the “Day of Forests ” on March 21, which the FAO (Food and Agricultural Organization of the United Nations) introduced in the 1970s in response to global deforestation, the Lenzing Group presents its Sustainability Report 2019. This sets out how the company is actively dealing with the global challenges.

Lenzing produces fibers from the renewable raw material wood and is well known among its customers and partners in the global textile and nonwoven fabric industry for the clear position it takes as a sustainable producer. It is no accident that the new report is appearing on the International Day of Forests. Lenzing’s sustainable practices in procurement, especially for wood and pulp, were once again ranked as leading in the 2019 reporting year (Hot Button Report).

“Stand up! A gainst business as usual ”

Under the motto “Stand up! Against business as usual ”, Lenzing emphasizes its wider responsibilities over and above its products. Business - as - usual scenarios have to be overcome, in particular for climate protection. With a science-based target, Lenzing is taking action to master the problems caused by climate change. The Lenzing Group is committed to reducing its greenhouse gas emissions per ton of product by 50 percent by 2030 (baseline: 2017). The Science-Based Target s initiative has approved Lenzing’s climate target as science-based.

Breakthrough in REFIBRA™ technology

One of Lenzing’s strategic principles under its “Naturally positive” sustainability strategy and a focus in the 2019 Sustainability Report is the circular economy. To address the enormous textile waste challenges of industry and society, Lenzing has developed a unique recycling technology branded REFIBRA™. This technology enables garment production waste to be reprocessed into fibers. 

 

 

More information:
Lenzing
Source:

Lenzing

print close
more
A modern hydroponic herb growing facility. (c) AWOL
A modern hydroponic herb growing facility.
20.03.2020

Salad days for the UK’s Anglo Recycling

Anglo Recycling Technology is on course to deliver no less than a million of its special nonwoven mats for hydroponically growing herbs to a major customer in the Middle East this year. The Growfelt-branded products arose from the discovery back in the late 1990s by Anglo Recycling’s owner Simon Macaulay, that the Sussex-based retail supplier of salads, Van Heineken Brothers (now Vitacress), used nonwoven felts on which to grow its cress.

“I drove down to see the company’s production manager, Chris Moncrieff and discovered they were indeed growing cress on felts, but they were made from virgin materials and he liked the idea of maybe using a blend of virgin fiber offcuts of cotton, wool, and polypropylene,” he explains. “That’s how Growfelt was born. For the first six years, we supplied exclusively to Vitacress and in return, they helped us to bring our factory up to food-grade standard and to set in place a testing regime for Salmonella E-Coli coliforms and listeria.”

Anglo Recycling Technology is on course to deliver no less than a million of its special nonwoven mats for hydroponically growing herbs to a major customer in the Middle East this year. The Growfelt-branded products arose from the discovery back in the late 1990s by Anglo Recycling’s owner Simon Macaulay, that the Sussex-based retail supplier of salads, Van Heineken Brothers (now Vitacress), used nonwoven felts on which to grow its cress.

“I drove down to see the company’s production manager, Chris Moncrieff and discovered they were indeed growing cress on felts, but they were made from virgin materials and he liked the idea of maybe using a blend of virgin fiber offcuts of cotton, wool, and polypropylene,” he explains. “That’s how Growfelt was born. For the first six years, we supplied exclusively to Vitacress and in return, they helped us to bring our factory up to food-grade standard and to set in place a testing regime for Salmonella E-Coli coliforms and listeria.”

In recent years, however, Anglo Recycling, which is based in Whitworth, near Rochdale in the UK, has significantly broadened its customer base. It now offers a core of three growing media products to meet the differing needs of customers across Europe, the Middle East, and the Far East, whether for retail presentation and appearance or for water holding.

 

Anglo Recycling Technology Ltd., Tong Lane, Whitworth, Rochdale, Lancashire, OL128BG (c) AWOL
More information:
Anglo Recycling Technology
Source:

AWOL

print close
more
From left: Carlo Centonze, Dr. Thierry Pelet holding the first prototype of HeiQ Viroblock NPJ03 treated face masks (c) HeiQ
From left: Carlo Centonze, Dr. Thierry Pelet holding the first prototype of HeiQ Viroblock NPJ03 treated face masks
17.03.2020

HeiQ Viroblock NPJ03 antiviral textile technology tested effective against Coronavirus

HeiQ, winner of the Swiss Technology Award and Swiss Environmental Award, launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment that is tested effective against coronavirus.

Since its inception 15 years ago, HeiQ has forged a solid innovation track record helping brands improve textile products. Catalyzed to action by the global fight against Coronavirus, HeiQ launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment which is proven effective against human coronavirus (229E) in face mask testing, significantly enhancing the antiviral log reduction from 2.90 of untreated face masks to 4.48, over 99.99% reduction of virus infectivity. (Remarks: a log reduction of 2 is equivalent to 100 times the effectiveness).

Chinese protective masks producer Suzhou Bolisi is the lead adopter of HeiQ Viroblock NPJ03. Treated masks will be available on the market as early as this April. American legwear manufacturer Kayser-Roth is planning to add the technology to their new product, Ghluv hands protector, while Lufeng from China is evaluating the technology on other types of fabric used for garments.

HeiQ, winner of the Swiss Technology Award and Swiss Environmental Award, launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment that is tested effective against coronavirus.

Since its inception 15 years ago, HeiQ has forged a solid innovation track record helping brands improve textile products. Catalyzed to action by the global fight against Coronavirus, HeiQ launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment which is proven effective against human coronavirus (229E) in face mask testing, significantly enhancing the antiviral log reduction from 2.90 of untreated face masks to 4.48, over 99.99% reduction of virus infectivity. (Remarks: a log reduction of 2 is equivalent to 100 times the effectiveness).

Chinese protective masks producer Suzhou Bolisi is the lead adopter of HeiQ Viroblock NPJ03. Treated masks will be available on the market as early as this April. American legwear manufacturer Kayser-Roth is planning to add the technology to their new product, Ghluv hands protector, while Lufeng from China is evaluating the technology on other types of fabric used for garments.

HeiQ Viroblock NPJ03 is a unique combination of vesicle and silver technologies designed to inhibit the growth and persistence of bacteria and viruses. The HeiQ vesicle technology targets lipid- enveloped viruses, such as coronavirus, providing rapid virus deactivation, while the HeiQ silver technology inhibits the replication of both bacteria and viruses. HeiQ Viroblock NPJ03 can be applied to a wide spectrum of textile surfaces including face masks, air filters, medical gowns, curtains, drapes and more. HeiQ also has a range of highly wash-durable antimicrobial and odor control textile technologies, called HeiQ Pure, combining silver-based and bio-based materials for all fabric types.

More information:
HeiQ Coronavirus
Source:

HeiQ

print close
more