From the Sector

Mimaki Europe, Hersteller von Tintenstrahldruckern und Schneidetechnologien, hat die Ernennung von Takao Terashima zum neuen Managing Director bekanntgegeben.

Terashima begann seine Laufbahn bei Mimaki 1997 in der Forschungs- und Entwicklungsabteilung des Unternehmens. In den vergangenen 26 Jahren entwickelte er umfangreiche Fachkenntnisse in Bezug auf das Technologieportfolio von Mimaki und den zugehörigen Markt.

Während seiner Zeit bei Mimaki hatte er mehrere leitende Positionen im Unternehmen inne. Bevor er seine neue Rolle übernahm, war er Senior General Manager der Asia Oceania Business Unit, eine Position, die er 2017 antrat. Davor war er von April bis Oktober 2017 sechs Monate lang Senior Deputy General Manager of Quality Management.
 
Terashimas beruflicher Werdegang bei Mimaki führte ihn über den japanischen Hauptsitz hinaus in mehrere Niederlassungen des Unternehmens, wo er unterschiedliche Zuständigkeiten hatte. Zwischen 2013 und 2017 war er vier Jahre lang Managing Director von Mimaki Singapur. Zu Beginn seiner Karriere arbeitete er auch bei Mimaki USA im technischen Support.
 
Terashima, der Takahiro Hiraki als Managing Director von Mimaki Europe ablöst, wird umfangreiche Branchenkenntnisse, analytisches Denken, geschäftliche und teambildende Fähigkeiten sowie ein umfassendes Wissen über das Unternehmen in die neue Rolle einbringen.

Solvay is partnering with transportation providers KIITOSIMEON and ADAMS LOGISTICS to reduce the carbon footprint of its facility in Voikkaa, Finland. Known for its hydrogen peroxide technology, the site has a yearly capacity of 85 kilotons, making it the largest hydrogen peroxide unit in the country and one of the largest in Europe. However, the transportation of its products results in more than 850 tons of CO2 emissions annually, attributed to the several thousands deliveries conducted each year.

While the Voikkaa site has been operating on 100% wind-generated electricity since 2023, the journey towards decarbonization takes another step forward as it transitions transportation fuel from diesel to biofuel in the first quarter of 2024. This shift will result in a significant annual reduction of over 700 tons of CO2 emissions, representing more than 8O% reduction in the site's transportation carbon footprint.

As part of its commitment to carbon neutrality by 2050, Solvay has outlined a sustainability roadmap with around 40 energy transition projects. These projects focus on eliminating coal usage, emphasizing renewable energy sources, prioritizing energy efficiency, and driving process innovation. Solvay has further committed to reduce its emissions* along the value chain by 20% by 2030.

*scope 3 emissions, focus 5 categories, 2021 baseline

Der Statusbericht der deutschen Kreislaufwirtschaft 2024 beleuchtet zum dritten Mal nach 2018 und 2020 die Situation der deutschen Kreislaufwirtschaft. Seit der ersten Veröffentlichung im Mai des Jahres 2018 sind fast sechs Jahre vergangen. In diesem Zeitraum haben in Deutschland zwei Ereignisse für eine veränderte Sichtweise auf die Branche geführt: Zunächst die Corona-Krise, die nicht nur die Leistungs- und Anpassungsfähigkeit der Branche, sondern auch ihre Systemrelevanz für die Funktionsfähigkeit des gesellschaftlichen und wirtschaftlichen Lebens unter Beweis gestellt hat. In diesem Zusammenhang ist seit Anfang des Jahres 2020 auch das Ansehen der Abfallentsorgung und vor allem der beteiligten Mitarbeiterinnen und Mitarbeiter in der Bevölkerung deutlich gestiegen.

Der Angriffskrieg auf die Ukraine hat vor Augen geführt, wie stark Deutschland von Energie- und Rohstoffimporten abhängig ist und wie schnell Störungen in den Lieferketten zu Problemen bei der Versorgung mit wichtigen Gütern führen können. Die Abfallwirtschaft kann sowohl durch die Kreislaufführung von Rohstoffen als auch durch die energetische Verwertung wichtige Beiträge zur Reduzierung dieser Abhängigkeiten leisten.

Die Kernthesen des Statusberichtes 2024

• Das gesamte Abfallaufkommen in Deutschland bleibt seit vielen Jahren stabil bei rund 400 Millionen Tonnen, die Abfallmengen aus privaten Haushalten steigen sowohl absolut als auch pro Kopf weiter leicht an
• Die Kreislaufwirtschaft wächst weiter: Mehr Recycling, mehr Beschäftigung und ein Umsatzsprung durch höhere Rohstoffpreise.
• Kreislaufwirtschaft international: Wachsende Märkte für Technik und Güter bei zunehmendem Wettbewerbsdruck für die deutschen Unternehmen
• Kreislaufwirtschaft vernetzt: Bedeutende Beiträge zum Klimaschutz, zur Rohstoffversorgung und zur Energiewende.
• Die Wertschätzung der Branche und ihrer Beschäftigung nimmt zu, gleiches gilt allerdings nicht für die Akzeptanz der für die stoffliche und energetische Verwertung notwendigen Anlagen.
• Kreislaufwirtschaft digital und innovativ: Die Digitalisierung unterstützt Sammlung und Transport, innovative Verfahren verbessern die Recyclingergebnisse, Startups mit neuen Ideen
• Produzenten und Recycler rücken immer enger zusammen, gleichwohl sind für den Wiedereinsatz von Recyclingrohstoffen die Absatzmärkte sicherzustellen
• Brüssel gibt mittlerweile in vielen Feldern der Kreislaufwirtschaft die Zielrichtung und die Geschwindigkeit vor. Das Ziel: Die Transformation von einer linearen Wirtschaft zu einer Circular Economy
• Für den Transformationsprozess zur Circular Economy ist eine funktionierende Kreislaufwirtschaft die wichtigste Basis, gleiches gilt für den Green Deal

The European Chemicals Agency (ECHA) has added five new chemicals to the Candidate List. One of them is toxic for reproduction, three are very persistent and very bioaccumulative and one is toxic for reproduction and persistent, bioaccumulative and toxic. They are found in products such as inks and toners, adhesives and sealants and washing and cleaning products.

The Agency has also updated the existing Candidate List entry for dibutyl phthalate to include its endocrine disrupting properties for the environment.

ECHA’s Member State Committee has confirmed the addition of these substances to the Candidate List. The list now contains 240 entries – some are groups of chemicals so the overall number of impacted chemicals is higher.

Fashion for Good's Sorting for Circularity framework expands to address the challenge of ensuring rewearable textiles remain in use as opposed to finding their way into global waste streams or landfills. This 18-month project tests automated sorting technologies using artificial intelligence and machine learning to optimise the sorting of rewearable garments and enable greater circularity.

This project will test automated sorting technologies using machine learning and artificial intelligence (AI) to collect product information — such as colour, style, garment type, and quality. This will enable sorters and brands to make better decisions and sort efficiently based on product data and criteria from local, European, and export resale market requirements, thus optimising the flow of textiles to achieve their highest value potential.

To ensure accuracy and representation in capturing data on the flow of textiles within the EU and export markets, this project will focus on specific geographical regions: Lithuania (Nordic/Baltic), the Netherlands (Western), Poland (Central-Eastern), and Spain (Southern Europe).

The findings will be shared in a report with a supporting business case and implementation roadmap to inform investment decisions in infrastructure, Circular Business Models (CBM) and repair centres.

The Rewear Project builds on Fashion for Good’s Sorting for Circularity framework initiated in 2021 and subsequently launched in Europe, India and the United States harmonising the collection, sorting and recycling industries in order to advance textile-to-textile recycling technologies and the resale industry.

It is funded by brand partners adidas, BESTSELLER, Bonprix, C&A, Inditex, Levi Strauss & Co., Otto Group, PVH Corp., and Zalando. Circle Economy Foundation leads the creation and implementation of the methodology, with support from Consumption Research Norway, Oslo Metropolitan University and Revaluate.

Growth, digitalisation and re-commerce – the forthcoming INNATEX (the international trade fair for sustainable textiles) is devoted to highly topical themes. From 20 to 22 January 2024 at the Messecenter Hofheim Rhein-Main near Frankfurt, over 200 exhibitors will be meeting up with retailers, experts and journalists. The motto for the winter trade fair is GROW, representing the call for sustainable, social and commercial growth that will not be possible without the green fashion movement.

Optimistic expectations despite the challenges
According to Alexander Hitzel, INNATEX Project Manager, and the organisers, MUVEO GmbH, various new trends are opening up that might, if exploited strategically, unlock new business areas. These range from ‘quiet luxury’, travel, internationalism and focused storytelling to services for specific target groups. On the Monday, members of the expert panel will be discussing re-commerce with the Hessen Retail Federation in the Community Lounge.

From storytelling to digital tools – the INNATEX themes
“Second-hand is in fashion,” says Julia Frings of IFH Köln. “Sales of used and recycled products have been on an upward trend for some years now and with the rising importance of sustainability, their relevance will continue to grow. There is great potential in this area for the trade to reach new target groups and expand the range on offer. To be successful, though, it is essential to have a concept tailored to the needs of consumers.”

Alongside Julia Frings of IFH Köln, other Federation panellists will include Steffen Riegel of Hessnatur. The first Lounge Talk at the start of INNATEX will deal with Strategies for Sensible Growth, borrowing from the motto for the fair. This topic will be followed by Fair Wages in the Global South, Storytelling as a Strategy, and Digital Trends.

Brand portfolio and partners of INNATEX
The collaboration with the Hessen Retail Federation, like that with Fashion Changers and Greenstyle Munich, has already proved its worth at previous fairs, as a way of adding variety to a well balanced fair programme. The new collaborative partners include AMD Academy of Fashion and Design (AMD) in Wiesbaden, the Fashion Campus 2030 Initiative and the Enterprise Europe Network (EEN, a network promoting internationalisation among smaller and medium-sized businesses).

The brand portfolio includes fashion for all generations, tastes and occasions. Labels exhibiting for the first time include businesses such as Fuza Wool from Denmark with its high quality traditional knitwear, and the hemp-based accessories of 8000Kicks from Portugal. The DESIGN DISCOVERIES comprise Anfisa Roumelidi, C/OVER and Consci.

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting not only served as a platform to foster new contacts and get informed about the expertise and interests of the consortium members in the field of hydrogen pressure vessels, but also laid the groundwork for steering the focus of the upc oming project's ambitious phases. As a basis for the interactive discussion session, AZL outlined the background, motivation and detailed work plan. The central issues of the dialogue were the primary objectives, the most pressing challenges, the contribut ion to competitiveness, and
the priorities that would best meet the expectations of the project partners.

Discussions covered regulatory issues, the evolving value chain and the supply and properties of key materials such as carbon and glass fibres and resins. The consortium defined investigations into different manufacturing technologies, assessing their matu rity and potential benefits. Design layouts, including liners, boss designs and winding patterns, were thoroughly considered, taking into account their implications for mobile and stationary storage. The group is also interested in cost effective testing m ethods and certification processes, as well as the prospects for recycling into continuous fibres and the use of sustainable materials. Insight was requested into future demand for hydrogen tanks, OEM needs and strategies, and technological developments to produce more economical tanks.

The meeting highlighted the importance of CAE designs for fibre patterns, software suitability and the application dependent use of thermoset and thermoplastic designs.

The first report meeting will also set the stage of the next project phase, which will be the creation of reference designs by AZL's engineering team. These designs will cover a range of pressure vessel configurations using a variety of materials and production concepts. The aim is to develop models that not only re flect current technological capabilities, but also provide deep insight into the cost analysis of different production technologies, their CO₂ footprint, recycling aspects and scalability.

AZL's project remains open to additional participants. Companies interested in joining this initiative are invited to contact Philipp Fröhlig.

2024 is a turning point for the European textiles and clothing industry: From 6 to 9 June 2024, European citizens will vote for a new European Parliament and, based on the results, a new European Commission will be formed. In view of this important election, EURATEX publishes a Manifesto, presenting 15 requests which will help to ensure a competitive European textiles and clothing industry.

The textile and apparel industry is making a substantial contribution to European wealth, jobs and growth. Europe counts 192,000 companies employing 1.3 million workers with a turnover of €167 billion and over €67 billion of exports. Entrepreneurship should be recognised as the foundation for a competitive textile industry, offering high quality and sustainable products, based on innovation, creativity and design. European policy makers should recognise such role to textiles and apparel companies and have an open dialogue to create better framework conditions to operate in the internal and global markets.

To realise that vision, the industry and policy makers need to work together on a mix of policy measures and initiatives, which are coherent and offer a transparent and predictable framework for our companies, and make them more resilient and competitive.

These policies should focus around four points:

Develop and implement a “smart” EU industrial policy
Europe should create policies which enhance competitiveness, instead of creating administrative burdens. To EURATEX, each new piece of legislation should undergo a “competitiveness test” to critically look at the impact of the new rules. Europe should also create a favourable environment to promote education and jobs in the industry. The EU textile industry currently employees 1,3 million people, 30% of which is above 50 years old. A critical bottleneck for the textile industry is to attract (young) people and make sure these people have the right set of skills, to operate in a changing textile ecosystem. EURATEX also asks the EU to invest in innovation and digitalisation as they are key to the European competitive advantage. Not only, as the last years have proved, Europe should provide companies with access to sustainable energy at lower prices.

No sustainability without competitiveness
The EU Strategy for Sustainable Textiles is pushing our sector towards new business models with a lower environmental footprint. To realise that ambition, no less than 16 regulatory proposals are on the table, each of them with a different timetable, managed by different departments of the European Commission. EURATEX is committed to sustainability, but asks for economic realism. This set of new regulations needs to be coherent, enforceable, feasible and applicable for SMEs, and not push textile companies out of the market. Moreover, some member states are moving forward faster and some legislations will be decided at national level, creating fragmentation of the market. Such scenarios will hamper Europe and its possibilities to grow.

Ensure free and fair trade
With $224 billion in sold merchandise, Europe is the second major world exporters of textiles and clothes after China ($321 billion). It is therefore important that the global market should be open, free and fair for our industry to continue to thrive. Besides the support to FTAs in general, EURATEX wants to emphasise that all trade agreements should offer effective market access for EU companies and a level playing field in these markets. A free and open market should go hand in hand also with protection against free riders. The EU must always consider enforcement and enforceability when making new laws; it should also take action together with the member states for a better coordination with harmonised criteria for action among Customs Authorities.

Incentivise the Demand for sustainable textiles
Sustainable textile products typically come at a premium price, making it difficult for many consumers and buyers to purchase such products. Many surveys across Europe confirm that around 50% of interviewees do not purchase sustainable fashion products and the main reason is price. EURATEX believes that, to create a demand and help consumers to buy a (genuine) sustainable textile product, there should be standard requirements and fiscal incentives. Public authorities should also implement green public procurements, by increasing the importance of sustainability criteria in their evaluation grids.

Syensqo announces the successful listing of its shares on Euronext Brussels and Euronext Paris under ticker SYENS. After the completion of the spin-off from Solvay, the listing marks a historical milestone as the company embarks on a journey focused on delivering superior growth and value creation.

Syensqo’s portfolio of market leading solutions addresses environmental and social challenges, through electrification, lightweighting, connectivity and resource efficiency. In addition, Syensqo is at the heart of the transition towards a net-zero economy, which is expected to drive new sources of value and support the company’s long-term growth.

With more than 13,000 employees and activities spread across the world (with 41% of FY2022 net sales in the Americas, 36% in Asia-Pacific and 23% Europe), Syensqo’s long-term ambition is to be the prime innovation partner for its customers, growing on average at around two times the rate of its main end markets, while further improving its best-in-class margin and returns.

Upon listing, Syensqo has 105,876,417 ordinary shares in issue, each carrying one voting right. The Syensqo share price started its journey at a value of € 90 at market open (9.00 am CET), which corresponds to a market capitalization of € 9.53 billion.