From the Sector

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

Here are the six nominees
Vybrana – The new generation banana fibre – GenCrest Bioproducts (India)
Vybrana is a Gencrest’s Sustainable Cellulosic Fibre upcycled from agrowaste. Raw fibres are extracted from the Banana Pseudo stem at the end of the plant lifecycle. The biomass waste is then treated by the Gencrest patented Fiberzyme technology. Here, cocktail enzyme formulations remove the high lignin content and other impurities and help fibre fibrillation. The company's proprietary cottonisation process provides fine, spinnable cellulose staple fibres suitable for blending with other staple fibres and can be spun on any conventional spinning systems giving yarns sustainable apparel. Vybrana is produced without the use of heavy chemicals and minimized water consumption and in a waste-free process where balance biomass is converted to bio stimulants Agrosatva and Bio Fertilizers & organic manure.

HeiQ AeoniQ™ – technology for more sustainability of textiles – HeiQ (Austria)
HeiQ AeoniQ™ is the disruptive technology and key initiative from HeiQ with the potential to change the sustainability of textiles. It is the first climate-positive continuous cellulose filament yarn, made in a proprietary manufacturing process and the first to reproduce the properties of polyester and nylon yarns in a cellulosic, biodegradable, and endlessly recyclable fibre.
HeiQ AeoniQ™ can be manufactured from different cellulosic raw materials such as pre- and post-consumer textile waste, biotech cellulose, and non-valorized agricultural waste, such as ground coffee waste or banana peels. It naturally degrades after only 12 weeks in the soil. Each ton of HeiQ AeoniQ™ saves 5 tons of CO2 emissions. The first garments made with this innovative cellulosic filament fiber were commercially launched in January 2023.

TENCEL™ LUXE – lyocell filament yarn – Lenzing (Austria)
TENCEL™ LUXE is LENZING’s new versatile lyocell yarn that offers an urgently needed sustainable filament solution for the textile and fashion industry. A possible botanical alternative for silk, long-staple cotton, and petrol-based synthetic filaments, is derived from wood grown in renewable, sustainably managed forests, and produced in an environmentally sound, closed-loop process that recycles water and reuses more than 99 % of organic solvent. Certified by The Vegan Society, it is suitable for a wide range of applications and fabric developments, from finer high fashion propositions to denim constructions, seamless and activewear innovations, and even agricultural and technical solutions.

Nullarbor™ – Nanollose & Birla Cellulose (Australia/India)
In 2020, Nanollose & Birla Cellulose started a journey to develop and commercialize tree-free lyocell from bacterial cellulose, called Nullarbor™. The name derives from the Latin “nulla arbor” which means “no trees”. Initial lab research at both ends led to a joint patent application with the patent “production of high-tenacity lyocell fibres made from bacterial cellulose”.
Nullarbor is significantly stronger than lyocell made from wood-based pulp; even adding small amounts of bacterial cellulose to wood pulp increases the fibre toughness. In 2022, the first pilot batch of 260kg was produced with 20 % bacterial pulp share. Several high-quality fabrics and garments were produced with this fibre. The collaboration between Nanollose & Birla Cellulose now focuses on increasing the production scale and amount of bacterial pulp in the fibre.

Circulose® – makes fashion circular – Renewcell (Sweden)
Circulose® made by Renewcell is a branded dissolving pulp made from 100 % textile waste, like worn-out clothes and production scraps. It provides a unique material for fashion that is 100 % recycled, recyclable, biodegradable, and of virgin-equivalent quality. It is used by fibre producers to make staple fibre or filaments like viscose, lyocell, modal, acetate or other types of man-made cellulosic fibres. In 2022, Renewcell, opened the world’s first textile-to-textile chemical recycling plant in Sundsvall, Sweden – Renewcell 1. The plant will eventually reach 120,000 tons of annual capacity.

Sparkle sustainable sanitary pads – Sparkle Innovations (United States)
Globally, around 300 billion period products are discarded every year, resulting in millions of tons of non-biodegradable waste. Since most conventional sanitary pads contain up to 90 % plastics, they do not biodegrade for around 600 years. Sparkle has designed sustainable, plastic-free, biodegradable and compostable Sparkle sanitary pads. From product to packaging, they are made up of around 90 % cellulose-based materials with top sheet, absorbent core, release paper, wrapping paper and packaging made of cellulose-based fibres. Whether Sparkle pads end up in a compost pit, are incinerated or end up in a landfill, they are a more sustainable alternative compared to conventional pads that contain large amounts of plastics, complex petro-chemical based ingredients and artificial fragrances. When tested according to ISO 14855-1 by a leading independent lab in Europe, Sparkle pads reached over 90 % absolute biodegradation within 90 days in commercial composting conditions.

Over the past year, TMAS, the Swedish Textile Machinery Association, has been working with ClimatePartner on a corporate carbon footprint (CCF) mapping project with its member companies, as a natural step towards supporting a more sustainable textile industry.

Over half of the members of TMAS are participating in the project, which involves calculating each operation’s Scope 1, 2 and 3 emissions in order to identify the current climate impact and areas where reductions can be made.

“Integrating climate action into strategies is becoming increasingly important in Europe and we have decided to take a pro-active role,” says TMAS secretary general Therese Premler-Andersson. “There is growing pressure from customers to be more transparant in this area and forthcoming legislation will soon make it necessary for all to take climate actions. TMAS members, however, recognise the benefit of taking action now, not least in terms of taking responsibility and demonstrating credibility.”

The CCF project’s scope examines all aspects of a business split into five areas:

• Facility Management (heating, electricity, water, cooling agents and waste disposal).
• Employee Mobility (commuting and company cars).
• Business Travel (flights travel by train, rental cars).
• Procurement (production, packaging and office materials).
• Logistics (inbound and outbound).

Primary data is being used wherever possible and emission factors originate from internationally recognised databases such as ecoinvent and GEMIS.

The ClimatePartner measurement programme is based on the guidelines of the Greenhouse Gas Protocol Corporate Accounting and Reporting Standard (GHG Protocol), and factors in all greenhouse gases covered by the Kyoto Protocol. These are carbon dioxide (CO₂), methane (CH₄), nitrous oxide (N₂O), hydrofluorocarbons (HFC), perfluorocarbons (PFC), sulphur hexafluoride (SF₆) and nitrogen trifluoride (NF₃).

Each of these gases affect the atmosphere differently and remain in the atmosphere for different lengths of time. Rather than reporting on each gas separately, they are expressed as a CO₂ equivalent (CO₂e) for the sake of simplicity. A CO₂e is essentially a conversion into a ‘global warming potential’ value that enables the influence of different gases on global warming to be compared.

Baldwin Technology Co. Inc. has appointed Adina Starke, a seasoned print and packaging professional with wide-ranging expertise, as Regional Sales Leader for the West Coast.

At Baldwin Technology Company Inc., a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries, Starke will be responsible for all product sales to print and packaging professionals in Washington, Idaho, Oregon, California, Nevada, Arizona, Utah, Alaska and western Canada.

Starke has spent the past 15 years in various technical and sales roles in the print and packaging industry. Most recently, she spent four years with All Printing Resources (formerly JVI Solutions), as a Territory Manager and a Technical Sales and Business Development Representative. Prior to that, she spent several years with Lohmann Specialty Coating and Sun Chemical.

Starke graduated from Clemson University with a Bachelor of Science degree in Graphic Communications.

• Future plans for the nonwovens market

The two companies will develop sustainable materials solutions based on CJ Biomaterials’ PHACT™ PHA and NatureWorks’ Ingeo™ PLA technologies NTR and CJ Biomaterials

CJ Biomaterials, Inc., a division of South Korea-based CJ CheilJedang and leading producer of polyhydroxyalkanoate (PHA), and NatureWorks, an advanced materials company that is the world’s leading producer of polylactic acid (PLA), have signed a Master Collaboration Agreement (MCA) that calls for the two organizations to collaborate on the development of sustainable materials solutions based on CJ Biomaterials’ PHACT™ Biodegradable Polymers and NatureWorks’ Ingeo™ biopolymers. The companies will develop high-performance biopolymer solutions that will replace fossil-fuel based plastics in applications ranging from compostable food packaging and food serviceware to personal care, films, and other end products.

The initial focus of this joint agreement will be to develop biobased solutions that create new performance attributes for compostable rigid and flexible food packaging and food serviceware. The new solutions developed will also aim to speed up biodegradation to introduce more “after-use” options consistent with a circular economy model. The focus on compostable food packaging and serviceware will create more solutions for keeping methane-generating food scraps out of landfills, which are the third largest source of methane emissions globally, according to World Bank. Using compostable food packaging and serviceware, we can divert more food scraps to composting where they become part of a nutrient-rich, soil amendment that improves soil health through increased biodiversity and sequestered carbon content.

CJ Biomaterials and NatureWorks plan to expand their relationship beyond cooperative product development for packaging to create new applications in the films and nonwoven markets.  For these additional applications, the two companies will enter into strategic supply agreements to support development efforts.

• Carbios’ biorecycling and biodegradation technologies internationally recognized by consumers as promising answers to their top environmental concerns
• Carbios’ innovations considered one of the best for solving recycling effectively and achieving a real plastic circularity
• Consumer research including qualitative and quantitative fields was conducted between March and August 2022. The research institute, Strategic Research, conducted 6000 interviews in Europe and USA

Carbios’ biorecycling and biodegradation technologies acclaimed by consumers
During the first research field study, respondents were exposed to Carbios’ biorecycling process; a new enzyme-based biotechnology that enables biological recycling of all types of PET plastic waste (including bottles, packaging and textiles), and pushes the boundaries of recycling in terms of the number of cycles.

The research results demonstrated that European and US respondents find Carbios’ biorecycling technology more unique and innovative than traditional PET recycling (i.e. thermo-mechanical recycling), as well as more relevant in its ability to address their concerns and challenges regarding recycling.

In the second research study, conducted in the US, respondents were also exposed to Carbios’ biodegradation technology: an innovative enzymatic solution by which an enzyme is incorporated into plastics during the production process of bio-sourced PLA plastics (corn, sugar cane). This approach makes the material made from plants 100% compostable at ambient temperatures and degradable like plants with the built-in enzyme biologically breaking the bioplastic down in less than eight weeks without microplastics or toxic residues; creating a fully organic circularity.

Similarly to Carbios’ biorecycling technology, Carbios’ PLA biodegradation innovation caught US respondents’ attention with 64% overall liking it. Additionally, 93% of the respondents sampled described the concept as innovative, unique, easy to understand (49%), and believable (43%). Up to 82% of the most environmentally engaged respondents declared they would definitely buy more products made with Carbios’ fully circular biodegradable bioplastic.

Consumers: No other choice but to make plastic fully circular
The research says 99% of the respondents consider it important to protect the environment, while plastic pollution is now ranked the third most-concerning environmental issues after climate change and ocean pollution.

This awareness brings most of these consumers to be environmentally active when it comes to purchasing goods and sorting. For the US respondents, eco-friendly packaging comes in the fourth place in terms of purchase drivers for packaged goods and 65% of them declare sorting plastic from general waste on a regular basis, which makes plastic the most sorted type of waste.

Nevertheless, for a vast majority of the respondents across geographies, even if they would like to reduce their plastic consumption most of the time there is no suitable alternative that is as convenient, light, and cost-efficient as plastics. Hence in an ideal world, consumers would like all plastic waste in landfills and oceans to be collected, cleaned, reused and recycled.

27^th International Garment Machinery, Spare Parts and Sub-Industry Exhibition, one of the largest exhibitions in Europe ended with great interest. The IGM 2022 Exhibition, which hosted ready-to-wear investors and leading brands of the garment machinery sector in Istanbul for 4 days, satisfied the exhibitors with the number of foreign and domestic visitors and machinery sales.

IGM 2022, Turkey's first and only international exhibition in its field, has become the most comprehensive meeting point of the sector where all technologies used in garment and ready-to-wear production from sewing to cutting, ironing systems to packaging, embroidery to printing are exhibited. IGM 2022, the first international exhibition organized in the garment industry after the pandemic, turned into a platform where many firsts were achieved. Especially domestic machinery manufacturers introduced the latest technologies and innovations developed in the last 4 years for the first time at IGM 2022. In addition, the latest models of embroidery machines were exhibited in working condition only at IGM 2022. International buyers, who had the opportunity to observe and examine all the innovations in the apparel and ready-to-wear sector together, had the opportunity to direct their investments thanks to IGM 2022.

The exhibition, organized in partnership with Tüyap & Teknik Fairs Inc. and in cooperation with KOMİD- Garment Automation Machinery Manufacturers Association and İNSAD- Istanbul Embroidery Industrialists Association, was held at Tüyap Fair and Congress Center on September 8-11. The IGM 2022 Exhibition, which was attended by 100 companies and company representatives from countries including Turkey, Japan, USA, China, South Korea, Brazil, Brazil, Italy, Spain, Germany, Greece, Netherlands, Bangladesh and Iran, was visited by 9822 sector professionals from 64 countries, including 1483 international and 8339 domestic visitors.

Next Meeting on September 21-24, 2023
The next meeting of the IGM 2023 Exhibition will be held at Tüyap Fair and Congress Center between September 21-24, 2023. Considering the dates of the exhibitions organized in the same sector in different countries of the world and Europe and the gains of the sector, an exhibition calendar was determined for the IGM Exhibitions to be held biennially. IGM Exhibition will be organized in 2023 and the following odd years (such as 2025-2027) in order to prevent companies from being under the burden of exhibitions in terms of both time and budget due to participating in more than one exhibition in the same year.

Freudenberg Performance Materials (Freudenberg) is presenting its sustainable Evolon® product range for reusable technical packaging for highly-sensitive parts at Fachpack 2022 in Nuremberg, Germany from September 27-29. The microfilament textiles offer improved surface protection for molded plastic parts, painted parts and so-called class A parts, thus providing customers with significant savings potential.

Evolon® RE is the most sustainable product in the portfolio. It contains the highest percentage of recycled PET and has a smaller carbon footprint. The new Ultra Force range from Evolon® offers extremely high mechanical strength and eliminates the need for PVC in the transportation and protection of large, heavy parts. Freudenberg has developed the ESD range (electro-static discharge range) for the packaging of sensitive electronic components: it offers permanent electro-static discharging and its surface resistivity can be customized.

Indorama Ventures Public Company Limited (IVL) announced that construction of an integrated PTA-PET plant in Corpus Christi, Texas, will resume in August this year. Corpus Christi Polymers LLC (CCP), a partnership between three companies, is expected to begin production in 2025 and ensure continued cost-competitive production to support the growth of IVL’s global PET operations into the next decade.

CCP was formed in 2018 as a joint venture between Indorama Ventures Corpus Christi Holdings LLC, a subsidiary of Indorama Ventures; DAK Americas LLC, a subsidiary of Alpek S.A.B. de C.V.; and APG Polytech USA Holdings, Inc, a subsidiary of Far Eastern New Century, following the purchase of a partially constructed facility of M&G Resins in Corpus Christi. Each partner will procure its own raw materials and receive one third of the PTA and PET produced at the facility to sell and distribute independently.

Construction of the plant is resuming following a period of pandemic-related disruptions. Through the pandemic, the partners firmly resolved to continue planning amid continued robust demand for PET packaging and the need for shorter supply chains. As the impact of the pandemic eased in 2022, the management team was strengthened in preparation for the resumption in activities.

CCP is expected to be the largest vertically integrated PTA-PET production plant in the Americas, and IVL’s biggest greenfields project in the U.S. since the development of the AlphaPet production facility at Decatur, Alabama in 2009. The new Texas facility is a significant addition to IVL’s leading global footprint, and will expand its coverage to customers across the U.S. The plant’s vertical integration optimizes PTA-PET production and, together with the availability of raw materials Paraxylene and Mono Ethylene Glycol in the U.S., ensures long-term competitive-cost supply for IVL’s locally integrated polyester value chain.

The facility will have nominal annual capacities of 1.1 million metric tons of PET and 1.3 million metric tons of PTA, shared between the partners. It will employ three state-of-the-art technologies: PTA: IntegRex®, PET melt: Invista, and PET solid state: Easy Up (HCIRR – Horizontal Continuous slightly Inclined Rotary Reactor).

CCP is adding to its leadership team to prepare for the new growth opportunities. Mr Russell Wilson will leave his role with IVL as Head of Manufacturing Americas, Combined PET, to take up a new role as Chief Executive Officer of CCP from 18 July. He brings 30 years of Aromatics and PET leadership experience including prior roles with Amoco and BP before joining IVL. Mr Todd Hogue, IVL’s Global Head of EH&S, replaces Mr Wilson as IVL’s representative on CCP’s Board. Mr Michael Day joined CCP as Project Director in June and brings 34 years of construction leadership experience including senior roles with Bilfinger, KBR, and CB&I.  Mr Jeff Shea will assume the role of Chief Operating Officer on 18 July.  Mr Shea has been in the PET industry for the last 22 years and has managed PET sites for the last 17. 

More than 450 participants from 18 countries made in-person connections and gained innovative insights into the segment’s future at the World of Wipes® (WOW) International Conference at the Marriott Marquis in Chicago.

INDA, the Association of the Nonwoven Fabrics Industry, reported strong attendance and activity at its 16th WOW conference, June 27-30. Highlights included a conference, award presentations, a separate 1.5-day WIPES Academy training course, and a new mentorship program.  

WOW speakers focused on the future of the $17 billion wipes sector amid changing consumer trends, supply chain complexities, sustainable packaging demands, and medical disinfection challenges. Program sessions included Circular and Sustainable Wipes, Supply Chain Challenges, Sustainable Substrates, Disinfection Concerns, Sustainable Packaging Trends, and Flushability Developments.

Tony Fragnito welcomed participants in his new role as INDA President for the first time since succeeding Dave Rousse, now President Emeritus and advisor.

WOW highlights included the announcement of Nice’ N CLEAN® SecureFLUSH™ Technology Flushable Wipes from Nice-Pak as the winner of this year’s World of Wipes Innovation Award® for their flushable wipes made of 100 percent cellulose nonwoven. A specialty “lock and key” design of plant-based fibers and formula leverages patent-pending technology to ensure responsible care of plumbing and wastewater.

Other highlights included the presentation of the 2022 INDA Lifetime Technical Award to Richard Knowlson, Principal, RPK Consulting. The award honors an individual with a long-established nonwovens career that advance technology and the commercial success of the North American nonwovens industry. Knowlson pioneered the use of powder super absorbents in airlaid forming systems creating new period product designs for ultra-thin products. He co-founded Airformed Composites, co-invented the first commercial multi-bonded airlaid products in North America that were used in characters for Sesame Street and served in leadership positions with Rayonier, Ciba/Huntsman and Jacob Holm.

On June 13, EREMA Group and Borealis invited representatives of the international plastics and recycling trade press to Upper Austria for a sneak preview of the technological developments and lighthouse projects that the companies will present at K 2022, the plastics industry's international meeting place. The venue for the pre-K event was EREMA Group headquarters in Ansfelden.

EREMA Group K 2022 preview
In Düsseldorf, the subsidiaries of the EREMA Group - which are EREMA, PURE LOOP, UMAC, 3S, KEYCYCLE and PLASMAC - will present their technological innovations, services and support together at a Group trade fair stand for the first time. Seven new recycling systems and components will be presented that enable large-scale plants with a production capacity of up to 6 t/h while setting a milestone in recyclate quality and process stability. This is made possible by technological innovations in the plasticizing unit that have been specially developed for high throughputs with low specific energy consumption, the new EREMA 406 laser filter with a 50 percent larger screening area, and new digital assistance systems that will be launched at K 2022 and made available on the BluPort® customer platform. These include, for example, the PredictOn app, which helps to anticipate and eliminate imminent malfunctions based on continuous measurement and evaluation of machine data.

New series of machines for new target groups
For customers looking for rapidly available recycling systems for simple applications, EREMA Group subsidiary UMAC has an innovation in store for K 2022. The company, which has so far specialised in refurbishing and trading in previously owned equipment, is expanding its business area and in Düsseldorf will launch READYMAC, a standardised, prefabricated recycling solution that can be produced from stock, based on proven EREMA TVE technology.

Finally, in the inhouse recycling segment, PURE LOOP and PLASMAC will round off the wide range of machines offered by the group of companies with their product portfolio.

Live recycling and lighthouse projects at the Circonomic Center
In the outdoor area of the K show, EREMA will bring plastics recycling to life with live demonstrations in conjunction with cooperation partners. Different waste streams are processed for this purpose. The wide variety of high-quality applications for recyclate will be showcased in the "products made of recyclate" exhibition, ranging from technical components to consumer goods and food packaging.

Borealis – accelerating the transition towards a more circular future
Borealis is committed to using their expertise and global reach to advance the circular economy of plastics. At the joint Pre-K 2022 kick-off on June 13, Borealis provided a preview of their integrated way of circular thinking and featured topics and activities at the K Fair 2022 in October. The preview covered new technologies and innovations including new packaging and infrastructure applications of the Bornewables™ portfolio of circular polyolefin products, manufactured with renewable feedstocks. New applications for Design for Recyclability, Re-Use, chemical recycling and advanced mechanical recycling were also on display.