From the Sector

The new Orthopac RXVMC-20 automatic straightening system for forward control of knitwear with strong distortions can remove distortions in textile webs even faster and more precisely.

"With the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the scanner system," explains Head of Sales Thomas Höpfl. Two individually controlled and driven straightening modules with a total of four bow and three skew rollers ensure that the correction of bow and skew distortions takes place in small steps. The control concept is also new. A scanner group at the infeed of the straightening machine detects distortions even before they reach the correction rollers. This way, the rollers are brought directly into position and the fabric is corrected from the very first centimetre. A scanner group at the outlet also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions.

The Orthopac RXVMC therefore shows its full strength when straightening knitwear and distortion-sensitive fabrics. Knitted fabrics are special in terms of distortion dynamics. It is difficult for operators when changing the fabric rolls to join the relatively short fabric webs with weft and loop-straight seams. Before and after unavoidable insufficient seams, the distortion (e.g. right before to left before) changes abruptly. Conventionally, the distortion change is only detected by scanning at the output of the straightener.
 
The RXVMC concept enables a shortened reaction time to jumping distortion, (especially in the case of seams) due to the improved scanning concept with scanning at the outlet and inlet. This reduces knitted fabric outside the straightening tolerance up to 50 percent after each seam. Fewer fabric pieces have to be reprocessed. It guarantees higher quality goods and thus less waste.

Founded in 2013, NOPINZ is a UK-based manufacturer of clothing for cyclists and triathletes. The company's first product was the ‘SpeedPocket’, a product that allows competitors to attach their race numbers more easily (and with ‘no pins’) while improving the all-important aerodynamics. Soon recognising the customer demand for premade attire with incorporated number pockets, the company embarked on a mission to manufacture these new product lines itself. Today, NOPINZ boasts a diverse portfolio, with 60% of its products made in-house, catering to a growing customer base across the UK and international markets. NOPINZ creates speed suits for some of the world’s top cycling teams, as well as competitive amateurs.

NOPINZ places a strong emphasis on sustainability and is committed to minimising its environmental impact. Using a microfactory approach gives better oversight and control of the manufacturing process, including sourcing materials sustainably and locally where possible, reducing transportation, and improving access to recycling. “Our ‘zero to landfill’ policy, means that we reduce our wastage where possible and either recycle or donate excess product to charity,” Blake adds. “We hope to become a B-Corp company in the future.”

“We tested out a few printers, before we ultimately settled on Mimaki,” Blake Pond, the founder of NOPINZ explained. Now the company’s line-up entirely consists of Mimaki’s textile dye sublimation solutions.
“During our search we prioritised the ability to produce fluorescence and accurately replicate colours. Customers often come to us with existing kit made by other manufacturers, which they want to match, so accurately replicating colour is extremely important. And even without existing kit, customers occasionally ask for specific pantone colours. When it comes to cycling kit, colour is often pivotal when considering where to buy from.”

As two flagship dye sublimation printers, both the TS300P-1800 and TS55-1800 are equipped to print on the various technical fabrics that are needed for cycling attire and faithfully reproduce colours to meet customer expectations.

International technology group ANDRITZ has successfully started up the new carding machine and opening/blending line it delivered to Albis in Roasio, Vercelli, Italy.

With its large working width of 5.10 meters, the machine allows for the production of nonwoven fabrics tailored to specific customer requirements while maintaining excellent properties and consistent quality. One example is Albis Curacell ®, a multilayer composite nonwoven fabric in a weight range between 35 and 70 gsm that is produced with a fully water-free patented process and is able to absorb liquid flows of over seven times its own weight. The production line also includes an advanced upstream opening and blending system from ANDRITZ.

Albis, a privately owned group founded in Italy in 1995 by Gianni Boscolo, has been a major player in the nonwoven market for over three decades. Through continuous research and development, the company offers innovative, high-quality nonwoven solutions across various sectors, including hygiene, medical, personal care, textiles, filtration, and agriculture.

•    First production supercar created with Hypetex coloured carbon fibre
•    Paint-replacement technology reduces weight to enhance performance

British car manufacturer Briggs Automotive Company (BAC) has created a unique Hypetex coloured carbon fibre version of its Mono R, reducing the weight by removing the need for paint.  

The original BAC Mono R was created to be lighter and more powerful than the standard model, with 343bhp and 555kg total weight, equating to a power-to-weight ratio of 618bhp-per-tonne. By removing the need for paint coatings in this version, the net weight of the exterior is reduced compared to a painted shell, resulting in a further improved overall performance.

The car’s body was created using Hypetex’s titanium carbon fibre twill, and finished with a crystalized lacquer, offering a unique aesthetic finish. The ultra-lightweight supercar can accelerate from zero to 60mph in less than 2.5 seconds.  

Hypetex’s paint-replacement technology retains the visible weave, allowing for a bold design and a choice of colours without technical compromises, perfectly aligning with BAC’s initiatives to maximise performance whilst creating bespoke supercars. Paint generally adds 138 grams per metre squared, whereas Hypetex adds just 17 grams for the same area, offering an 8x weight saving.
This bespoke version of BAC’s single-seater Mono R was subject to BAC’s renowned BAC Bespoke programme, which ensures that no two Monos are the same. The client, a US-based collector, worked with BAC’s design team to design the car to their personal taste.   

Born out of Formula 1 technology, Hypetex offers manufacturers sustainable aesthetic materials with technical and efficiency benefits. This collaboration is an all-British success story, with the Hypetex carbon fibre body built by Formaplex, a leading UK-based manufacturing company who manufacture lightweight engineered solutions for top tier customers in Automotive, Aerospace and Defence markets. BAC’s supply chain is 95% UK-based.  

Hypetex continues to expand its growing portfolio of the use of coloured carbon fibre to add personalisation to the automotive field, with its material recently featured on the 2024 Ford Mustang Dark Horse.  

Lectra, a leader in technology solutions for the fashion, automotive and furniture industries, announces the appointment of Frédéric Morel as President of the Asia-Pacific region and as a member of the Group's Executive Committee, where he replaces Edward Wang, who previously held the same position. This nomination comes as Lectra prepares to present its latest software and connected equipment offers at the CISMA (China International Sewing Machinery and Accessories) trade show in Shanghai, China, to enable Asian industry players to accelerate their transition to Industry 4.0.

Lectra's presence in the Asia-Pacific region began in 1985 with the opening of its first office in Japan. Today, Lectra employs 16% of its workforce in the region, which accounted for 25% of the Group's revenues in 2022. Thanks to its dynamism, economic fabric and position in world trade, China is a key market in this region, generating 9% of Lectra’s revenues in 2022.

Prior to joining Lectra, Frédéric Morel held the position of South East Asia & Pacific Executive Vice President at Vallourec. He had previously been appointed Sales Director and then Sales Vice President for Vallourec in the Middle East, after holding various sales and general management positions for the company in the Asia region. A graduate of the Institut d'Etudes Politiques d'Aix-en-Provence and the EMLYON business school, Frédéric Morel began his career in 2000 with Saint-Gobain.

Stahl, a leading provider of coating technologies for flexible substrates, has been awarded a Platinum rating by the sustainability rating agency EcoVadis for the second consecutive year. For the 2023 EcoVadis assessment, Stahl’s rating increased by three points compared to its 2022 score, reflecting the company’s improved performance in the area of labour and human rights.

Progress in the Labour & Human Rights category
The 2023 EcoVadis assessment revealed the progress Stahl is making in the Labour & Human Rights category, where Stahl scored 90 out of a possible 100 points. This reflects the company's recent work to improve its health and safety management systems. In particular, the majority of Stahl’s global manufacturing sites are now ISO 45001 certified and more than 94% are ISO 14001 certified. Stahl has also taken steps to improve its approach to employee career development and well-being. These include the creation of an individual career plan for all employees and the introduction of a new company-wide employee satisfaction survey.
 
Stahl moves forward with 2030 ESG ambitions
Stahl has set a 2030 target to maintain its EcoVadis Platinum rating by working closely with its value chain partners to help them reduce their impact. In 2022, 83% of Stahl’s total spend on raw materials was sourced from EcoVadis-rated suppliers.

EcoVadis is a globally recognised, evidence-based rating platform that assesses the performance of more than 90,000 organisations against key sustainability criteria across four categories: Environment, Labour & Human Rights, Ethics and Sustainable Procurement. For the 2023 EcoVadis assessment, Stahl received an overall score of 80 out of 100, up from 77 in 2022. This score indicates an advanced level of sustainability maturity and ensures that Stahl retains its Platinum rating. This is awarded to the top 1% of companies assessed by EcoVadis. Stahl achieved its first Platinum rating in 2022, having undergone its first EcoVadis assessment in 2015.

Deakin University has signed a partnership agreement with Geelong-based company Xefco as part of its Recycling and Clean Energy Commercialisation Hub (REACH) to conduct new research to transform how our clothing, including jeans, get their colour.

Jeans are one of the most worn garments in the world, but they are also one of the least environmentally friendly, taking around 75 litres of water to dye just one pair.

Deakin’s work with Xefco is helping to explore if a waterless manufacturing process can replace the water intensive processes the clothing industry has used for hundreds of years. The new technology in development is called ‘Ausora’.

Associate Professor Alessandra Sutti, from Deakin’s Institute for Frontier Materials, said it was exciting to be on the commercialisation journey with Xefco, working with the company to discover what is possible and hopefully reduce the world’s fashion footprint.

“If successful, the Ausora technology, which colours fabrics without the need for large quantities of water, will put us a step closer to more efficient and sustainable clothing manufacturing,” Associate Professor Sutti said.

Xefco CEO Tom Hussey said the company’s new pilot plant, housed at Deakin in Geelong, will test different materials, including specialised fabrics such as waterproof items like outdoor jackets and jeans.

“This is the first stage of Xefco’s vision for the technology, with the REACH project focused on demonstrating the commercial viability of the technology at pilot scale and developing processes so it can be scaled up for commercial production,” Mr Hussey said.

“Together, Deakin and Xefco will push the limits of innovation and see what is possible.”
Xefco’s pilot plant is co-located with Deakin researchers at ManuFutures, the state-of-the-art advanced manufacturing hub at Deakin’s Waurn Ponds campus.

Founded in 2018 Xefco now employs 17 people and its products are already making a difference across the world. Its XReflex technology, which reduces consumption of insulation materials, is being used by some of the world’s leading apparel and fashion brands including The North Face.

Backed by a $50 million grant from the Australian Government’s inaugural Trailblazer Universities Program, with industry and university support taking the total project value to $380 million, REACH is facilitating the development of greener supply chains and accelerating business success as markets move from a throughput economy to a circular economy.

Santoni Shanghai Knitting Machinery Co., Ltd. announced the strategic acquisition of Terrot GmbH, a manufacturer of circular knitting machines based in Chemnitz, Germany. The move comes as the latest development in Santoni Shanghai’s long-term vision to build an ecosystem that aims to reshape and consolidate the circular knitting industry. The transaction will be finalized pending approval from Chinese regulatory authorities.

The global circular knitting machine market is expected to see significant growth in the coming years, with a July 2023 report from Consegic Business Intelligence forecasting a 5.7% CAGR from 2023 to 2030, propelled by an increasing consumer preference for breathable and comfortable knitted fabrics as well as increasingly diversification of demand for knitted apparel. To seize this market opportunity, Santoni Shanghai has developed an ambitious strategic plan centered around innovation, sustainability and digitalization. The new partnership with Terrot aims to further this strategy by enhancing Santoni’s integrated and scaled-up ecosystem, while also driving the sustainable development of the global knitting machinery industry.

“With the strategic investment of Santoni, we aim to strengthen our position as the preferred solution provider to many of the world’s leading textile manufacturers and top brands as well as continue working with industry talents as we provide valuable and essential know-how to drive premium ‘Made in Germany’ textile machinery.” said Robert Czajkowski, Managing Director of Terrot GmbH. "We have found a strong, globally active partner with clear dedication to quality, performance and excellent expertise in all circular knitting segments, who understands the unique value proposition and potentials of our portfolio and with whom we can realize our growth objectives” he added.

Textil Santanderina, a manufacturer of quality fabrics with controlled traceability, launched its Advanced Black denim collection in collaboration with Archroma.

The Advanced Black collection by Textil Santanderina uses Archroma’s new DIRESUL® EVOLUTION BLACK LIQ dyestuff to produce on-trend authentic black denim apparel with sustainability and resource savings. In addition to allowing fashion and apparel brands to choose eco-friendlier alternatives that demonstrate their commitment to protecting people and planet, Textil Santanderina’s new Advanced Black denim range also offers unique shade and wash-down effects.

Based on synthesis technology developed by Archroma, DIRESUL EVOLUTION BLACK LIQ delivers an overall impact reduction to 57%*, measuring its effect on human health, ecosystems and resources compared to standard Sulfur Black 1 liquid. Unlike traditional synthesis processes, it does not produce any ammonia, sodium salts waste or liquid effluents, and water consumption in the synthesis process is reduced by 73% for massive savings. The new DIRESUL dyestuff, when adopted with the full Archroma coloration system, delivers a new black color with on-tone wash-down effect and cleaner effluent at the mill.

Textil Santanderina and Archroma previously collaborated to produce Textil Santanderina’s aniline-free** indigo denim collection with the use of DENISOL® PURE INDIGO.

*As determined by Ecoterrae, a leading Spain-based sustainability consulting firm, through a Life Cycle Analysis (UNE-EN ISO 14044:2006) at the synthesis stage, using the ReCiPe 2016 Impact calculation methodology.
**Below limits of detection according to industry standard test methods.

Kelheim Fibres, a manufacturer of specialty viscose fibres, showcases its latest developments at this year's Global Fiber Congress in Dornbirn. The focus is on innovative solutions that not only promote environmental sustainability but also strengthen the European supply chain.

In his presentation "Towards high performing plant-based AHP products - a joined approach of Pelz and Kelheim Fibres," Dr. Ingo Bernt, Project Leader of Fiber & Application Development at Kelheim Fibres, together with Dr. Henning Röttger, Head of Business Development at PelzGROUP, introduces the development of a plastic-free yet high-performance panty liner. The water-repellent Kelheim specialty fibre Olea plays a crucial role in both the top and backsheet of the panty liner. This product emerged from the ambition to offer eco-friendly alternatives to conventional disposable hygiene solutions without compromising on product performance.

A similar approach is pursued in the second presented project. Under the title "Performance Fibres meet Sustainable Design - example of a reusable Baby Diaper," Natalie Wunder, Project Leader from Kelheim Fibres' New Business Development team, together with Caspar Böhme, Co-Founder of Sumo, introduce the washable and reusable SUMO diaper. Made from biobased materials and featuring a unique construction with Kelheim specialty fibres, this combination offers double environmental benefits compared to conventional disposable baby diapers.

Both the panty liner and the SUMO diaper are manufactured entirely in Europe, resulting in shorter transportation routes and a reduced CO2 footprint. Moreover, these innovations contribute to strengthening the European textile and nonwovens industries by fostering innovation within Europe.