From the Sector

Bobingen - Trevira GmbH, Germany, is again participating as an exhibitor at this year’s Building Healthcare show in Dubai, from 2-4 October. The manufacturer of high-value polyester fibres will present a large variety of fabrics made by 12 partners from inherently flame retardant Trevira fibres and yarns.

Modern furnishing concepts for healthcare environments are making increasing demands in terms of quality, functionality, colouring and hygiene. Perfectly matched materials and colour concepts in the interior not only help to provide good orientation for the residents, but also create more attractive spaces. In addition, the use of appropriate textiles such as curtains, drapes, blinds and sliding panels, fabric-covered dividing panels, upholstery and bedding textiles, can improve the room acoustics, protect your privacy and let the room appear in a pleasant light. In healthcare environments where hygiene and cleanliness are of particular importance, antimicrobial textiles may be used.

Trevira CS® and Trevira CS Bioactive® create a safe, attractive and comfortable environment in hospitals, clinics, spas, care homes and all other sectors in the contract sector.

Trevira CS Bioactive® contract textiles combine flame retardant and antimicrobial functions, which makes them the ideal material for use in healthcare facilities. They inhibit the growth of bacteria, prevent the formation of odours in/on the fibre and keep the textiles fresh for a longer time. The permanent flame retardant and bioactive properties of their fibres is integrated at molecular level, meaning that they remain unaffected by repeated washing, abrasion and ageing. This gives them an advantage over textiles with only a supplementary surface finish.

Trevira CS® and Trevira CS Bioactive® fabrics for the healthcare sector presented at the show stand come from these suppliers: Delius, Dina Vanelli, Fidivi Tessitura Vergnano, Gebrüder Munzert, JAB, Mattes & Ammann, Pugi, Rubelli, Rudolf Breuer Mechanische Weberei, Schmitz Textiles/drapilux, Subrenat, Verotex.

Trevira CS® and Trevira CS Bioactive® fabrics meet the requirements of the relevant international fire safety standards and can be certified according to the IMO regulations for the maritime sector. All Trevira fibres and yarns carry the Oekotex Standard 100 certificate. They are manufactured in accordance with the highest standards for sustainable products. A broad variety of collections with thousands of designs are available in Trevira CS® worldwide.

• September 19, 20, and 21, 2018
• This September visit Première Vision’s Smart Square for a great opportunity to meet and greet ROICA™ experts to discuss responsible innovation and well-being.

ROICA™ experts showcase the world-first ROICA™ Eco Smart family that offers 2 responsible made yarns: a GRS (Global Recycled Standard) version 3 certified yarn and the world’s first yarn awarded Cradle2Cradle Material Health Gold Level Certificate and Hohenstein Environment compatibility certification.

On display in the Smart Square, a 800-sq. m. area dedicated to shed light on a new generation of values combining creativity, innovation and sustainability, is a  unique  range of ROICA™ Eco-Smart family based fabrics, the world's first responsibly made premium stretch fibers creating ROICA™ smart yarns that offer sustainable solutions with impressive certifications:

• Global Recycled Standard (GRS) certified by Textile Exchange - ROICA™ constructed with more than 50% pre-consumer recycled content.
• Cradle to Cradle Certified™ Gold Level for Material Health product and ingredients - ROICA™ yarn evaluated throughout the supply chain for lower impacts on human and environmental health. Striving toward eliminating all toxic and unidentified chemicals for a safe continuous cycle. Hohenstein Environment Compatibility Certificate - ROICA™ proudly breaks down without releasing harmful substances.

ROICA™ experts empower attendees with knowledge, and inspire creativity as they demonstrate ROICA™ Eco-Smart family functionality. Engage the experts in the Smart Square, ask questions and learn about the company’s ongoing commitment to responsible innovation. At the corporate level, ROICA™ has achieved the following certifications: Oeko Tex 100, ISO 14001:2004, ISO 9001:2008. Moreover, ROICA™ mills in Germay achieved the certification of ISO 50001:2001.

ROICA™ partners exhibiting at Première Vision Paris presenting ROICA™ Eco-Smart family:

• Fukui Warp Knitting CO.,LTD  (JP) Hall 6 booth H15
• Iluna Group S.p.A (IT) Hall 5 booth N14 P13
• Jackytex (IT) Hall 5 booth M24 N23
• Lanificio Europa (IT) Hall 6 stand D12, F49
• Maglificio Ripa S.p.A. (IT) Hall 5 booth 5P29
• M.I.T.I. Spa (IT) Hall 6 booth G19
• Penn Textile Solutions GmbH / Penn Italia (DE/IT) booth 6G17
• Sofileta (FR) Hall 6 booth H18 6J13
• TINTEX Textiles (PT) Hall 5 booth N56

Additional ROICA™ partners at Première Vision also exhibiting a wide-range of other ROICA™ specialties:

• Eusebio (IT) Hall 5 booth 5P34 5R15
• Kurabo Industries LTD (JP) Hall 6 booth C20 D21

Lastly, on Friday 21st September 2018, at 1.30 pm, you are invited to join Dr. Stephan Hütte at Première Vision Smart Square as he facilitates an open discussion with exhibitors and introduces the audience to ROICA™ Eco-Smart family. Dr. Hütte will discuss ROICA™ textile innovations for contemporary consumer within the fashion, lingerie and activewear markets.

Recognizing Asahi Kasei for spearheading the premium stretch market, the Dorbinbirn-GFC Global Fiber Congress has invited Dr. Stephan Hütte, Development Manager ROICA™ Fibers at Asahi Kasei to present ROICA™ Eco-Smart family at this year’s congress. The Europe-centered innovation platform for the fiber industry is a distinguished idea and network generator hosting top-ranking international experts in fiber innovations. The event includes 700 participants from 30 nations and will take place September 12th through the 14th in Austria.

Last but not least, at Première Vision ROICA™ is proud to welcome Shinichiro Haga, Senior Executive Manager - ROICA™ Division. The company also announces an internal appointment: Mr. Hiroaki Shinohe elected as Chief Marketing Officer for European market.

Trevira, one of the market leaders in polyester yarn manufacture, and the development services company imat-uve have together achieved a milestone in textiles design: the use of 3D flat knitting technology for automotive interiors. In a jointly developed process that unites innovative yarn technologies with cutting-edge connection and finishing techniques, Trevira and imat-uve have found a way of producing anatomically contoured seat covers and trim components for vehicle interiors. Why is this important? The answer lies in the way it's done. Because the technology uses just one knitting process rather than several, manufacturers can reduce their production and materials costs, as it's no longer necessary to cut and assemble the fabrics. But the new invention is not just cost-effective – the flat knitting technique means that it's now possible to personalise design and function to a much greater degree, representing another important step in the direction of on-demand production.

Trevira and imat-uve are the first companies to develop such a sophisticated application of the knitting process for use in vehicles, thanks to imat-uve’s innovative processing and finishing technique which deploys a low-melt yarn specifically developed by Trevira. The collaboration has resulted in a high-performing knitted product which satisfies even the most demanding criteria in terms of quality and comfort. The VDA 230-210 standard velcro test carried out by imat's testing laboratory found that the product was extremely abrasion resistant. The 3D flat knitting technology even means that areas known to be vulnerable, such as the seams on seat covers, can be strengthened in the course of the same single knitting process. Another benefit of the technology is its contribution to sustainable manufacturing. Not only does it work on the zero waste principle, but the knitted fabric itself is manufactured entirely from yarn made from PES recyclates.

Thomas Rademacher, Head of Development at Trevira, explains why the collaboration was so successful. "The development company imat-uve came up with a new breakthrough technology, while here at Trevira, we contributed our own recycled yarns and a new low-melt yarn we've developed based on synthetic fibres, which provides a stabilising effect. Together we have created a highly sought-after, top quality product for automotive interiors. Flat knitting will now be the go-to technology for vehicle interiors – in the future, it will be impossible to imagine life without it."

Hans Peter Schlegelmilch, imat-uve’s CEO, pointed out the especial benefits of the new technology for vehicle manufacturers and their suppliers. "The 3D flat knitting technology doesn't just make it possible to save time and money on production. It also opens up a whole new world of personalisation for end consumers. We are extremely pleased that with Trevira as our partner, we have been able to take this significant step towards the future of automotive interiors."

As the countdown to the 2018 edition of Cinte Techtextil China enters its last two months, the final exhibitor line-up is starting to take shape. A number of leading international and Chinese brands across the fair’s 12 product application areas will feature at the Shanghai New International Expo Centre from 4 – 6 September, with an expected 500-plus total exhibitors from around 20 countries & regions set to feature.

Nonwovens exhibitor highlights

As the fair’s largest product category, buyers have a wide range of domestic and overseas brands to source from, including:

• Johns Manville (US): who will showcase their polyester spunbond, PP & PBT meltblown, glass fibre nonwoven, micro glass fibre nonwoven, hybrid nonwoven, glass fibre needle mat and glass microfibre product lines among others at the fair.
•  J.H. Ziegler (Germany): with over 150 years’ expertise and their own production plant in China, they offer products for acoustic absorption in automotive interiors and exteriors, nonwoven foam composites for leather lamination, needle-punched nonwovens, foam nonwoven composites, laminated nonwovens and natural-fibre nonwovens.
• KOBE-cz (Czech Republic): a new exhibitor to the fair, their nonwoven fabrics, mainly made from glass fibre with temperature resistance up to 800°C, are used for high-temperature isolation in the automotive, marine, energy and building industries. They also have isolation materials made from natural fibres including hemp, wool, cotton and flax.
• TDF Nonwovens (China): one of the leading domestic brands, their specialties are polyester spunbond geotextiles, polyester filament roofing carriers, filter nonwovens, high-strength coarse denier polypropylene spunbond geotextiles and medical & health nonwovens.
• Kingsafe (China): they specialise in the production of fusible interlining and nonwoven fabrics for high-end garments.

Yarn & fibre exhibitor highlights

• Perlon (Germany): has developed a PET based monofilament, HighGrip, which guarantees long-lasting efficiency of conveyor belts, and is available in various types with different tribological characteristics, which they will feature at the fair.
• Sateri (China): is a global leader in viscose rayon made from 100% dissolving wood pulp, and the largest maker of viscose fibre in China. Their natural and high-quality fibre, made from trees grown on renewable plantations, can be found in textiles and skin-friendly hygiene products.
• Cordenka (Germany): producers of industrial rayon, their product range covers rayon tire cord, yarn, single-end dipped cord, short-cut fibre and more.
• EMS-Griltech (Switzerland): will showcase a range of technical fibres & yarns and thermoplastic adhesives at the fair.
• Barnet (Germany): several finished products (nonwovens, spun yarns and fabrics) made with their specialty fibre will be on display at the fair, including OPAN, para-aramid and carbon filament fibres. The application of their specialty fibre in flame retardant and anti-cut gloves and felts will be shown at their booth for the first time.

Coated textiles & solutions exhibitor highlights

• Stahl (the Netherlands): the Dutch company will present new products from their water repellent and flame retardant ranges at this year’s fair. According to the company, as the Chinese government continues its efforts to clean up the environment, eco-friendly chemicals remain in strong demand in the country.
• Sioen (Belgium): will showcase sign materials, truck tarpaulins, tents, membrane fabrics, apparel products, chemicals and specialty products such as inflatable boat fabrics, pool liners and more at Cinte 2018.
• ROWA Lack (Germany): a new exhibitor at this year’s fair, they will present their special lacquer systems and top coatings.
• Trelleborg (Sweden): also a new exhibitor, they will display engineered textiles, especially in the fields of outdoor, medical, protective and automotive.
• FPC Technical Textile (Saudi Arabia): another first-time participant at the fair, they will showcase a range of high-end specialty fabrics including PVC coated fabrics and fibre glass PTFE fabrics.
• Zhejiang Jinda New Materials (China): this supplier is known for its coated textiles for industrial, transportation and building uses, as well as warp knitted geo-synthetic materials and printable coated materials for advertisements.

Lenzing to showcase its new VEOCEL nonwovens specialty brand at the fair

First announced in June this year, and featuring at Cinte Techtextil, Lenzing’s new VEOCEL brand is billed as a premium range of nonwovens fibres for daily care, which “provides the nonwovens industry with fibres that are certified clean and safe, biodegradable, from botanic origin and produced in an environmentally responsible production process.” Products in this range can be applied to a multitude of uses including baby care, beauty and body care, intimate care and surface cleaning, under the VEOCEL Beauty, VEOCEL Body, VEOCEL Intimate and VEOCEL Surface brands.

EUROBIKE, the world’s leading trade fair for the cycling industry, will include ROICA™ smart innovations into the race. Cycle retailers, brands and manufacturers will discover ROICA™ premium stretch that provides comfort and movement as it energizes.

ROICA™ will go the distance as they join this year’s EUROBIKE Academy line-up and host an interactive panel focused on sustainability as an added value for the cycling market. Whether an expert or newcomer, the must attend panel titled; What is Smart Innovation in the Biking Market? will be held on Monday, July 9th from 12:00-12:45 in Conference Center East, Room London. Moderated by Giusy Bettoni, CEO, C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy), a Milan based company generating global strategies and identifying new values essential for today’s knowledgeable conscious consumer. The panel will lead the way, as they share their expertise and discuss what they are doing to push the boundaries of innovation. They will highlight responsible dimensions and processes currently available. The all-star lineup includes:

Uwe Schmidt, Asahi Kasei’s ROICA™, Managing Director introduces cycle enthusiasts, brands, retailers and manufacturers to the world’s first premium sustainable stretch yarn: ROICA™ Eco-Smart and the ROICA™ Feel Good family dedicated to well-being.
 
Laura Gambarini, marketing and communication manager at M.I.T.I. S.p.A.: M.I.T.I. Since 1931, M.I.T.I. develops and creates premium and innovative stretch warp knitted fabrics for all the high performance sports. Cycling brands recognize M.I.T.I. as the market leader for the outstanding features of their innovative fabrics. Green soul is their ultimate creation, the first fully sustainable stretch warp knitted range of fabrics in the world, created with ROICA™ Eco-Smart family for the new generation sustainable performance garments.
 
Sven Koehler, Head of production Maloja Clothing GmbH: Maloja, an outdoor specialty brand with its roots in nature and wellbeing have developed new amazing biking sets constructed of M.I.T.I. SpA fabrics using certified yarns belonging to ROICA™ Eco-Smart family.
 
Sergio Alibrandi, Executive Marketing Director Sitip S.p.A.: SITIP creates high-tech innovative sports fabrics that are made in Italy and optimize the latest technology. Committed to smart innovation, learn how they developed their ground-breaking multi-panel thermal bib tights able to generate heat for riders that want to conquer cold winter training. Made from BeHOT fabric constructed with ROICA™ StretchEnergy™, the next level of well-being providing a new dimension to active performance.  The audience will learn how leading international cycling brand Santini is using BeHOT with ROICA™ on select products to generate additional heat – up to 2 degrees C as the cyclist moves their body, thanks to ground-breaking heat generating technology as certified by CeRism, Outdoor Sport Research Centre at Verona University.
 
Spearheading the premium stretch market, ROICA™ partners’ materials elevate new standards for high-tech performance that can enhance cycling products to compete responsibly. ROICA™ partners excite you as they show a fantastic range of stretch essentials for cycling clothing, gear, and apparel that offer solid performance perks. Most importantly, visit ROICA™ partners at EUROBIKE to learn about their ongoing commitment to responsible innovation and creativity.

OutDoor2018: Schoeller’s coldblack® technology has been specifically optimized for use on knitted and woven fabrics so brands can now expand their product application uses. Under the blazing sun, textiles with coldblack® heat up less and stay cool to the touch. Südwolle Group, a leading manufacturer of high quality yarns, has also recognized the ideal combination of merino and coldblack®. With this, the wear comfort of wool apparel can be tangibly improved.

Wool is well known for its various property benefits, including insulation, natural antibacterial protection, odor control, light weight and nearly wrinkle free composition. Not only in the winter time, but also in summer particularly merino wool, a special high-quality type of wool, regulates moisture balance and thus the body temperature. The fibers can absorb a great deal of moisture or sweat and transport it away from the body. Warm ambient air quickly dries the material and causes a cooling evaporation, which makes it very comfortable to wear merino apparel in the summer time.

coldblack® technology from Schoeller supports the natural properties of wool because it reliably reduces heat build-up when exposed to the sun. Together with the help of Südwolle Group, the finish has been optimized specifically for the use in merino apparel. The yarn manufacturer chooses coldblack® for a variety of uses, especially for knitting and weaving yarns for sports and outdoor apparel and develops such products individually according to its customers’ requirements.

Stéphane Thouvay, Managing Director Product Management & Innovation at Südwolle Group, summarizes the use of the technology as follows: “coldblack® is part of our product range for the summer time, which we will be presenting at OutDoor show in Friedrichshafen. The technology reduces not only heat build-up, but also enhances the natural UV protection of wool without affecting the look and feel of the fabric. Therefore coldblack® perfectly fits into our yarn selection for sports and outdoor apparel, for example in our collection ʻYarn in Motion’. For end consumers garments made of coldblack® yarns can optionally be labeled with hangtags.”

When used in high-quality woolen fabrics, coldblack® has already proven its performance and is being used by renowned brands in various collections of men’s suits. Since 2008, the technology has been licensed by more than 200 brands, in sports particularly in the field of cycling, triathlon and golf. All components of the finish are bluesign® approved.

Exhibitors from eight countries have already confirmed to participate in the fair’s European Zone. They join an expected 500-plus total exhibitors from around the world. The 2018 edition of this biennial fair takes place from 4 – 6 September in halls N1 – N3 of the Shanghai New International Expo Centre.

While China retains its edge in terms of technical textiles and nonwovens production capabilities, in the eyes of Chinese buyers, European suppliers are still the leaders when it comes to technology and innovation. This was widely reported by European exhibitors at the previous edition in 2016 of Asia’s leading biennial trade event for the industry: Cinte Techtextil China.

“In the Chinese market, buyers want good quality products, so overseas companies, and products with recognised quality certifications, have a lot of potential,” Ms Ping Chen, General Manager of IBENA Shanghai Technical Textiles commented. “As a leading German company in the industry, our products are welcomed by many buyers at this fair. It is also important to be in the German Pavilion as this signals to buyers that we have quality products, and it attracts more attention.” Swiss firm Sanitized AG had the same experience. “As a Swiss company in the European Zone I believe it’s an advantage, as some local buyers have more confidence towards imported products,” Mr Steven Liu, Sales Manager said.

Other exhibitors commented on the long-term trends in the Chinese market. “There’s a definite shift to more high-quality machinery in China that isn’t affected by what’s happening in the overall economy. Moreover, there are opportunities for overseas suppliers as there is still a gap between us and what Chinese companies produce,” Dr Joachim Binnig, Vice President, Head of Development & Technology, Autefa Solutions Germany GmbH explained.

Mr Roger Zhang, Sales Manager for German firm J.H. Ziegler Nonwovens and New Materials commented: “Our products are mainly for high-end Chinese customers, such as BMW and Audi. The Chinese market has gradually matured, but the production capability for high-performance products which are energy efficient and eco-friendly is still developing, so there is a lot of space for overseas brands to develop here.”

European Zone highlights
This year’s European Zone will feature around 30 exhibitors from eight countries, including Austria, Belgium, the Czech Republic, France, Italy, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, the Czech Republic, Germany and Italy. Some of the exhibitor highlights in the European Zone include:

• Arkema (France): with brands including PMMA Altuglas, Rilsan, Pebax, Kynar PVDF and Bostik, they will present polymer resin for fibres and yarns, which apply to a wide range of applications, at the fair.
• Dakota Coating (Belgium): specialists in thermoplastic and thermosetting adhesives, their polymer products, based on polyethylene, polyolefin or mixtures, ethylene vinyl acetates, co-polyamides, polyurethanes and co-polyesters, are suitable for automotive, building, heat transfer and sound insulation uses.
• Lenzing Plastics (Austria): a new exhibitor at the fair, they are a leading manufacturer of polyolefin and fluoropolymer products, such as Thermoplast and PTFE products. One of their core competencies lies in the monoaxial stretching of films and filaments, and they offer special solutions in the fields of construction & insulation, medicine & hygiene, packaging and cables, as well as automotive and technical textiles. They will highlight their PROFILEN® PTFE product at the fair, and with its extreme durability and very smooth surface, it is highly valued in many niche applications in the technical and medical sectors.
• Protechnic (France): leading manufacturers of hot-melt adhesives and plastic printed films, they will showcase hot melt thermo-adhesive nets, webs and films at the fair.
• Trelleborg Coated Systems (Italy): another new exhibitor this edition, they produce high-performance, engineered coated fabrics. They offer a wide variety of substrates – from Kevlar® to silk – with a choice of weaving methods.

• Yarn Expo Spring’s status as Asia’s leading industry event attracts 15% more buyers
• National Exhibition and Convention Center (Shanghai)
• Shanghai, China, 14 – 16 March

Yarn Expo continued its evolution into the industry’s most comprehensive and effective business platform with its Spring Edition which concluded last week with a large increase in the buyer figure, as well as another year of growth in the exhibitor number. Strong demand was evident for recent growth areas of the fair such as synthetic, fancy and specialty yarns as well as chemical fibres, while exhibitors in the more traditional cotton product group also fared well. In total, 435 exhibitors from 10 countries & regions took part (2017: 393, 12 countries & regions), attracting 25,966 trade buyers from 88 countries & regions (2017: 22,579, 94 countries & regions).

“Once again, Yarn Expo proved itself as the ideal trade fair for the industry to benefit from changing demands and product trends, especially in the Chinese and wider Asian markets,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd explained. “The fair has evolved in recent editions to have a much bigger focus on synthetic, fancy & specialty yarns and chemical fibres, and based on the exhibitor feedback during the fair, there was an increase in buyers sourcing these products this year. What’s more, local buyers were showing strong interest in the offerings from Southeast Asian countries such as Indonesia and Thailand, while Vietnamese cotton exhibitors reported increased orders from China due to the favourable trade policies between these countries.”

As one of the industry’s leading players, Birla Jingwei Fibres naturally plays a big role at Yarn Expo, with their Birla Planet pavilion proving highly successful for the company. Senior Vice President Mr Sachin Malik, explained: “Yarn Expo is a very important platform for Birla, to be visible to our value chain, to connect with our customers, and our own clients’ customers. We value Yarn Expo as a long-term partner for showcasing our products and connecting with the value chain. Each edition we connect with more and more buyers, and more customers in the industry recognise the importance of this fair. It has developed into a premium event in the global textile industry calendar. Usually this edition is quieter than the autumn fair, but the results this year saw the spring edition reach the same level. Our booth was always packed with buyers, and we also received more high-quality and international buyers. Our pavilion members are also very satisfied with the buyers and their results this time.”

Exhibitor comments

Indonesia

“Yarn Expo is an ideal platform to meet not only Chinese but also global buyers. The fair attracts so many good-quality buyers, and compared to other fairs attracts more of our target buyers. The results this edition have been good. After four years of doing business in China, we’ve found many Chinese customers who are willing to pay for quality. The demand in the China market for high-quality products is growing, in particular because of the shortage of spinning capacity which is made up for by imports. We’ve seen more serious and meaningful buyers that have strong desire for further cooperation this time, and I think the potential of this market will continue to grow.” Mr Anupam Agrawal, Director Spun Yarn Business, PT. Indo-Rama Synthetics Tbk

Korea

“Our booth was so crowded throughout the fair. We had more than 300 buyers visit us, and I guess approximately 30% of them will turn into business after the fair. Our target buyers are fabric and garment manufacturers, and we found a lot of good quality ones here. A wide range of worldwide buyers from different market sectors sourced at our booth, especially big-brand sportswear manufacturers and sourcing offices. We’ve had visitors from China, Europe and many other countries. We are very satisfied with our first Yarn Expo experience, and we expect a very good outcome after the show.” Mr Joo Son, International Sales Team, HJLite

Pakistan

“Yarn Expo is the global meeting platform for all yarn industry players. You have buyers from all over the world here, so it is the best trade platform in Asia to connect with worldwide buyers. We’ve met people from Argentina, Columbia, Korea, Indonesia, the UK and the US. Around 40% of them are new to us. We’ve noticed that everyone is looking for new products nowadays, so we always bring new items. Fancy yarn is getting more common in China, and demand is growing steadily. China is definitely a huge market for us to develop.” Mr Mohammad Saad, Director of Abtex Intl Ltd

India

“Yarn Expo is really helpful in that it has a diverse buyer profile and attracts buyers from around the world. We managed to talk to customers from Pakistan, India and Colombia, as well as potential Chinese buyers who are very interested in our products. The buyers have been genuine with specific sourcing needs, and some of them have already placed orders.” Mr N. Sarawgi, Representative of Madhusudan Rayons Pvt. Ltd

Thailand

“This edition we brought our new Kapok material to the fair for the first time. It has been the most popular product at our booth. In recent editions, we’ve also met more and more garment factories asking for customised fancy yarn to make their products competitive and unique, while eco-friendly and natural yarns are also more popular. Yarn Expo is the platform we announce our new products and technologies, and the feedback from buyers from around the world can help us improve them and learn the latest market trends. The fair is of great value for our market strategy.” Mr Warakorn Bunkanokwong, Export Sales Manager, Kongkiat Textile Co Ltd

Singapore

“We are here to explore the China market, but are also glad more customers from Europe and America visited our booth. Many of the buyers here are at the decision-making level, so can give us clear requirements and advice about our products. This is a highly effective fair to meet Chinese buyers to learn first-hand what the market needs.” Mr Rahul Gupta, Marketing Manager, Texvista Intl Pte Ltd

Vietnam

“Yarn Expo is a great chance to meet our existing partners and find new buyers. Compared to China cotton yarn, we still have an advantage in price and quality which attracts a lot of buyers to our booth. Yarn Expo provides us with a quick way to tap into the Chinese and Asian markets.” Mr Du Xuan Cuu, Trade Director, Hanam Textile Co

Uzbekistan

“The Chinese market is important to us, so we chose to exhibit in Yarn Expo. We have met many buyers here, and each year we can find new customers through Yarn Expo. The international nature of this fair is also beneficial for our business.” Mr Dilshod, Export Manager, Exoeast Trade LLP

China

“Yarn Expo is the largest platform in Asia. Compared to other fairs, the buyers here are of higher quality; genuine buyers make up a large portion and most of them come with sourcing intentions. Currently, fancy yarn is in great demand in the market. The number of customers looking for such products is significantly higher this year, and Yarn Expo can effectively help us capture this demand.”
Ms Stella Gan, Sales Manager, Jin Dun Textile

Buyer comments

“We can find all ranges of cotton yarn, fancy yarn and chemical fibres at Yarn Expo. Most of the famous brands are here, and they bring the latest technologies and products, including debut products. Yarn Expo always catches the latest trends in the industry and presents them at the fair. This year the quantity and quality of fancy yarn exhibitors has increased, so I’ve found some products to source already.” Mr Wang Gaofeng, Deputy General Manager, Jiaxing Jinqie Fashion Co Ltd, China

“We mainly came to source fancy yarn this time, and we found many new options. This international show greatly expands our sourcing options. Many of our existing suppliers, including from Indonesia, exhibit at this fair so that’s why we source here. We’re satisfied with the exhibitor quality, and intend to place orders afterwards. There have been a number of new technologies presented here that left a deep impression on us.” Ms Linggar Jati Halim, Director, PT. Kartika Sinar Mulia, Indonesia

“I like this fair as it gathers exhibitors from the entire industry supply chain. As the demand for functional fabrics continues to increase, we can also see this trend in Yarn Expo. Therefore, the fair helps us to learn about the industry’s developments.” Mr Jiang Chang, Marketing Manager, Hangzhou Gaoxi Technology Co Ltd, China

The next Yarn Expo fair, the Autumn Edition, will be held at the earlier date of 27 – 29 September 2018, once again at the National Exhibition and Convention Center. 

• Innovative Textile Processes

Innovations are welcome. Based on innovations, many changes in textile processing are leading to more efficiency in process workflows. At the International Cotton Conference in Bremen on Wednesday, March 21st, Session IV Textile Processing, which takes place from 4:00 pm to 6:00 pm, is dedicated to this subject area and attractive examples.

Sustainable
Michael Tuschak, Mayer & Cie., Germany, informs about the 3-in-1 concept of Spinitsystems. Spinning, cleaning and knitting are all combined in one machine. This enables the production process of high-quality single jersey knitwear to be shortened significantly, which saves energy costs and reduces CO2 emissions.

Indigo.
An old dye returns to glory. Dr. Dean Etheridge of Texas Tech University, USA, talks about a new, innovative indigo dyeing process for cotton yarns using foam. This saves large amounts of water and is now increasingly being used by major brands in jeans production.

Efficient.
Amin Leder, Trützschler GmbH & Co. KG, Germany, presents a technique in which the stretching process for rotor yarn production does not take place in a separate machine, but is integrated into the carding. This makes it possible to efficiently process even cotton with a higher waste content.

Overview.
Harald Schwippel, from Rieter, Switzerland, summarises all four major spinning technologies for cotton – ring spinning, compact spinning, rotor spinning and air-jet spinning. His talk provides an overview of the possibilities that each of these processes currently offers for the manufacture of different yarns and the most efficient options for different applications.

More to know
In the run-up to the International Cotton Conference, the Fibre Institute Bremen and the Cotton Exchange are organising a specific seminar for spinning mills on Tuesday, dealing with the efficient handling of contaminants in cotton, from elimination in production to removal in winding. On Friday morning, Expert Session IX deals with the exchange of the latest research results, e.g. in the field of ginning in relation to cotton quality, or the important issue of checking the traceability of GMO-free cotton.

CHOMARAT, the composite reinforcement specialist group, is launching its multiaxial glass NCF for thermoplastic composites. The unique patented stitching yarn used can withstand processing temperatures to 400°C, making it an innovative industrial solution for thermoplastic composites and an alternative to the woven reinforcements used especially in the automotive sector. For the first time, CHOMARAT is also exhibiting a unidirectional carbon NCF reinforcement that is adapted to the productivity and performance requirements in the wind energy sector.

AN INNOVATIVE INDUSTRIAL SOLUTION TO REINFORCE AUTOMOTIVE THERMOPLASTICS
Thanks to a unique patented stitching yarn, the glass NCF reinforcement (G-PLY™) developed by CHOMARAT offers new possibilities in thermoplastic RTM and organosheet processes. “This is an especially innovative solution, utilizing stitching yarns that are compatible with processing temperatures to 400°C. These multiaxials improve the performance and provide a lot of construction freedom in terms of fibre orientation. These new design possibilities contribute to structural optimization. The quest for more lightweight vehicles, shorter cycle times and lower cost is a major issue for all builders,” explains CHOMARAT Automotive Market Manager Francisco De Oliveira.
This new heat-stable G-PLY™ reinforcement can withstand very high processing temperatures without deformation and provides optimal mechanical performance.

A CARBON UD TO REINFORCE EXTRA-THICK WIND TURBINE STRUCTURES
For the first time, CHOMARAT is exhibiting an infusion-moulded laminate made with 150 plies of its new unidirectional carbon C-PLY™. This 600g/m², high-permeability NCF can be used to create extra-thick structures, in particular the wind-turbine blade stiffeners, or spar caps. “Cost reduction is the challenge in the wind energy industry. Increasing the blade length by incorporating carbon stiffeners increases power, and so it also lowers the cost of the energy,” says CHOMARAT Wind Energy Market Manager Raphaël PLEYNET. The carbon UD developed by CHOMARAT provides a solution to achieve the goal to optimize the weight/power ratio. The UD’s high permeability reduces cycle times and lowers the blade production costs.

Professor Sung Ha from the University of Hanyang will give a conference on composite challenges in the wind energy sector at 11:30 am on Wednesday, 7 March 2018 at JEC World.
Established in 1898, CHOMARAT is an international industrial textile group, involved in three businesses: Composites Reinforcements, Construction Reinforcements, Coatings & Films–Textiles. The privately held company operates in France, Tunisia, the United States and China to service its global customers.
CHOMARAT leads a strong innovation strategy, rising to challenges, developing materials for the future. Hence, the Group invests in new technologies and enters into collaborative research programs with universities and technical centers worldwide.
CHOMARAT offers strong technical know-how and mastery of complex technologies in fields ranging from automotive, aerospace, sports, energy, marine, construction, and also in markets requiring creativity and expertise, like luxury goods.