From the Sector

Reset
593 results
Das Octogarn-Gründertrio Melanie Jakubik (vorne, von links), Alexandra Plewnia und Sarah Neumann erhält vom Bundes-Förderprogramm „EXIST“ 1,8 Millionen Euro. Foto Hochschule Niederrhein
Das Octogarn-Gründertrio Melanie Jakubik (vorne, von links), Alexandra Plewnia und Sarah Neumann erhält vom Bundes-Förderprogramm „EXIST“ 1,8 Millionen Euro.
25.10.2023

1,8 Millionen Euro an Ex-Studentinnen für Garninnovation

Badehose an, rein ins Wasser, mit trockener Badehose wieder raus – klingt utopisch, könnte aber womöglich bald schon Realität werden. Das Gründertrio von „Octogarn“ entwickelt gerade eine Innovation: ein neuartiges Garn, das die Textilindustrie umkrempeln könnte, für das die ehemaligen Studentinnen der Hochschule Niederrhein (HSNR) und der FH Aachen eine Förderung von 1,84 Millionen Euro erhalten. Das Geld stammt aus dem Förderprogramm „EXIST – Existenzgründungen aus der Wissenschaft“ des Bundesministeriums für Wirtschaft und Klimaschutz.

Badehose an, rein ins Wasser, mit trockener Badehose wieder raus – klingt utopisch, könnte aber womöglich bald schon Realität werden. Das Gründertrio von „Octogarn“ entwickelt gerade eine Innovation: ein neuartiges Garn, das die Textilindustrie umkrempeln könnte, für das die ehemaligen Studentinnen der Hochschule Niederrhein (HSNR) und der FH Aachen eine Förderung von 1,84 Millionen Euro erhalten. Das Geld stammt aus dem Förderprogramm „EXIST – Existenzgründungen aus der Wissenschaft“ des Bundesministeriums für Wirtschaft und Klimaschutz.

„Octogarn“ ist schadstofffrei, nachhaltig, kälteisolierend, atmungsaktiv und reibungsreduzierend. Es wirkt ähnlich dem Lotuseffekt, ist also wasserabweisend. Doch es hat einen entscheidenden Mehrwert: Es ist unbenetzbar. Bedeutet: Taucht man ein Textil aus diesem Garn unter Wasser, bleibt es trocken. „Ein Effekt, der in der Textilbranche kaum bekannt ist“, sagt die Mönchengladbacherin Alexandra Plewnia. Momentan werden viele wasserabweisende Textilien, vor allem im technischen Bereich, durch die Ausrüstung mit Chemie wie Fluorpolymeren hergestellt. Grüne Alternativen sind zwar umweltfreundlicher, aber oft nicht leistungsstark genug. „Octogarn“ will beide Probleme lösen.

Ideengeberin ist Alexandra Plewnia (29), die zuletzt Textile Produkte im Master an der HSNR studiert hat. Betriebswirtschaftliches Know-how bringt Sarah Neumann (28) aus Köln mit, die ihren Master berufsbegleitend in Management und Entrepreneurship an der FH Aachen absolviert hat. Komplettiert wird das Team ab November von Melanie Jakubik (29) aus Duisburg, Studienkollegin von Plewnia und wie sie für den Bereich Technologie verantwortlich.

Geforscht hat Plewnia an „Octogarn“ rund zwei Jahre im Rahmen ihres Master-Studiums am Fachbereich Textil- und Bekleidungstechnik, wo sie das Wahlpflichtfach Nanotechnologie belegte und sich mit dem Thema Funktionalität befasste..

Mit ihrer Idee gewann sie bereits 2022 den Hochschulwettbewerb „Battle of Ideas“. Die 20.000 Euro Preisgeld flossen direkt in die Anmeldung des Patents. Seither wurde die Idee auf vielen weiteren Wettbewerben in Deutschland vorgestellt.

Das Team von HNX, das gründungsinteressierte HSNR-Studierende und Mitarbeitende berät und u.a. im Rahmen des dort angesiedelten Förderprogramms „HNexist“ unterstützt, begleitete Plewnia und ihr Team. Es unterstützte bei der umfangreichen Antragstellung für EXIST.

Das noch zu gründende Start-up möchte das Garn produzieren und es als Zulieferer an Unternehmen vertreiben. Ob Outdoor-Kleidung, Schutzausrüstung oder Einsatz in der Schifffahrtsindustrie – dank der vielfältigen Eigenschaften des Materials gibt es für „Octogarn“ verschiedenste Einsazmöglichkeiten.

Das fertige Garn gibt es noch nicht. Die 1,84 Millionen Euro helfen, um bis zum Ende der Förderperiode im Februar 2026 einen Prototyp zu entwickeln. Das Fördergeld wird vor allem für Personalausgaben genutzt, aber auch eine neue Maschine wird angeschafft. Für die Entwicklung von Octogarn darf das Gründerteam Büroraume und Maschinen des Fachbereichs Textil- und Bekleidungstechnik mitbenutzen.

Source:

Hochschule Niederrhein

Winners of AVK Innovation Award 2023 (c) AVK
Winners of AVK Innovation Award 2023
25.10.2023

Winners of AVK Innovation Award 2023

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

Third place: “High Performance Recycled Carbon Fibre Materials (HiPeR)” – Composites Technology Center GmbH (CTC GmbH), partners: Faserinstitut Bremen e. V, Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; partners Japan: Faserinstitut Bremen e.V., Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; Partner Japan: CFRI Carbon Fiber Recycle Industry Co., Ltd., IHI Logistics and Machinery Corporation, ICC Kanazawa Institute of Technology

Innovative Processes & Methods category
First place: “Chopped Fibre Direct Processing (CFP)” – KraussMaffei Technologies GmbH, partner: Wirthwein SE

Second place: “CIRC - Complete Inhouse Recycling of Thermoplastic Compounds” – Fraunhofer Institute for Production Engineering and Automation (IPA), partners: Schindler Handhabetechnik GmbH, Vision & Control GmbH

Third place: “CarboScreen – Sensor-Based Monitoring of Carbon-Fibre Production” – CarboScreen GmbH, partner: Institute of Textile Technology at RWTH Aachen University

Research & Science category
First place: “Development of a Stereocomplex PLA Blend on a Pilot Plant Scale” – Faserinstitut Bremen e. V.

Second place: “Fibre-Reinforced Salt as a Robust Lost Core Material” – Technical University of Munich, Chair of Carbon Composites, partners: Apppex GmbH, Haas Metallguss GmbH

Third place: “VliesSMC – Recycled Carbon Fibres with a Second Life in the SMC Process” – Sächsisches Textilforschungsinstitut e.V. (STFI), partner: Fraunhofer Institute for Chemical Technology (ICT)

 

Entries for the next Innovation Award 2024 can be submitted from January 2024 onwards.

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V.

11.10.2023

Toray expands French Carbon Fiber Production Facilities

Toray Industries, Inc. will expand the French subsidiary Toray Carbon Fibers Europe S.A.’s production facilities for regular tow medium- and high-modulus carbon fibers (up to 24,000 filaments). This move will increase annual capacity at the Abidos plant (South-West France) from 5,000 metric tons annually, to 6,000 metric tons. Production is expected to start in 2025.

Demand for medium- and high-modulus carbon fibers is rising in Europe, driven by a push to move towards a net-zero society. This growth is mainly due to higher build rates for commercial aircrafts (secondary structures and engines), as well as centrifuge for energy production, satellites, and high-end automobiles. By boosting carbon fiber production capacity in Europe, Toray is responding to its customers’ demand for medium and high-modulus carbon fibers, as befits the market leader.

Toray Industries, Inc. will expand the French subsidiary Toray Carbon Fibers Europe S.A.’s production facilities for regular tow medium- and high-modulus carbon fibers (up to 24,000 filaments). This move will increase annual capacity at the Abidos plant (South-West France) from 5,000 metric tons annually, to 6,000 metric tons. Production is expected to start in 2025.

Demand for medium- and high-modulus carbon fibers is rising in Europe, driven by a push to move towards a net-zero society. This growth is mainly due to higher build rates for commercial aircrafts (secondary structures and engines), as well as centrifuge for energy production, satellites, and high-end automobiles. By boosting carbon fiber production capacity in Europe, Toray is responding to its customers’ demand for medium and high-modulus carbon fibers, as befits the market leader.

Source:

Toray Industries

(c) PantherMedia/Peryn
10.10.2023

VDI ZRE: Studie zu rezyklatbasierten Verpackungen veröffentlicht

Bis 2030 sollen in der EU 55 % der Kunststoffverpackungen werterhaltend recycelt werden. Inwieweit sich Rezyklate dabei für die Herstellung hochwertiger Verpackungsprodukte eignen und wann die Umstellung auf Recyclingkunststoffe für KMU wirtschaftlich sinnvoll ist, darüber informiert das VDI Zentrum Ressourceneffizienz im Rahmen einer neuen Studie.

Die Verwendung von Kunststoffen geht mit hohen Aufwänden an Primärressourcen bei der Werkstoffherstellung einher. Kunststoffrecycling stellt daher einen Schwerpunkt der politischen und regulatorischen Bestrebungen dar, um eine weitgehende stoffliche Verwertung von Kunststoffabfällen bis 2030 zu etablieren.
 
Um die Wiedereinsatzquote recycelter Kunststoffabfälle im Verpackungssektor zu erhöhen und Kunststoffkreisläufe nachhaltig zu schließen, braucht es Rezyklate, die u. a. mit Blick auf die gebotene Qualität eine möglichst geringe Schwankungsbreite aufweisen. Zugleich müssen die Preise für Rezyklate konkurrenzfähig gegenüber sogenannten virgin plastics (Kunststoffneuware) sein.

Bis 2030 sollen in der EU 55 % der Kunststoffverpackungen werterhaltend recycelt werden. Inwieweit sich Rezyklate dabei für die Herstellung hochwertiger Verpackungsprodukte eignen und wann die Umstellung auf Recyclingkunststoffe für KMU wirtschaftlich sinnvoll ist, darüber informiert das VDI Zentrum Ressourceneffizienz im Rahmen einer neuen Studie.

Die Verwendung von Kunststoffen geht mit hohen Aufwänden an Primärressourcen bei der Werkstoffherstellung einher. Kunststoffrecycling stellt daher einen Schwerpunkt der politischen und regulatorischen Bestrebungen dar, um eine weitgehende stoffliche Verwertung von Kunststoffabfällen bis 2030 zu etablieren.
 
Um die Wiedereinsatzquote recycelter Kunststoffabfälle im Verpackungssektor zu erhöhen und Kunststoffkreisläufe nachhaltig zu schließen, braucht es Rezyklate, die u. a. mit Blick auf die gebotene Qualität eine möglichst geringe Schwankungsbreite aufweisen. Zugleich müssen die Preise für Rezyklate konkurrenzfähig gegenüber sogenannten virgin plastics (Kunststoffneuware) sein.

Hier setzt die neue Studie „Ökologische und ökonomische Bewertung des Ressourcenaufwands – Einsatz von rezyklierten Kunststoffen in Verpackungsmaterialien“ des VDI ZRE an. Sie bietet einen praxisrelevanten Überblick zu Aspekten der Nutzung von Kunststoffrezyklaten für die Herstellung hochwertiger Verpackungsprodukte – auch für Anwendungsbereiche mit hohen Anforderungen an Maßhaltigkeit und mechanische Eigenschaften.
 
Ein Beitrag zur Ressourcenschonung und zum Klimaschutz
Die ökologisch-ökonomische Bewertungsstudie, die in Zusammenarbeit mit Forschenden des Öko-Institut e. V. und der Institut cyclos-HTP GmbH ausgearbeitet wurde, richtet sich insbesondere an kleine und mittlere Unternehmen (KMU) der kunststoffverarbeitenden Industrie, die den Einstieg in die Verwendung von Rezyklaten erwägen. Die Studie beinhaltet zum einen eine ökobilanzielle Vergleichsrechnung nach den VDI-Richtlinien 4800 Blatt 1 und 2 sowie eine Sensitivitätsanalyse. Zum anderen liefert sie einen Kostenvergleich für die zwei gegenübergestellten kunststoffbasierten Verpackungsvarianten und gibt Empfehlungen zur Evaluierung.

Aus ökologischer Sicht zeigt sich, dass das Treibhausgaspotenzial des Produkts aus rezykliertem Polypropylen (PP) um 25 % geringer ausfällt als das der Produktvariante aus PP-Neuware. Aus ökonomischer Sicht hat der Einkaufspreis den größten Einfluss an den gesamten spezifischen Betriebskosten. Zum Zeitpunkt der Erhebung beliefen sie sich auf 54 % für die Produktvariante aus recyceltem PP und auf 62 % für das Produkt aus primärem PP.

Die Studie „Ökologische und ökonomische Bewertung des Ressourcenaufwands – Einsatz von rezyklierten Kunststoffen in Verpackungsmaterialien“ des VDI ZRE wurde im Auftrag des Bundesministeriums für Umwelt, Naturschutz, nukleare Sicherheit und Verbraucherschutz (BMUV) erarbeitet und kann kostenfrei heruntergeladen werden.

 

Source:

VDI Zentrum Ressourceneffizienz

Dyneema® SB301 to Enable Weight Savings of up to 20% in Protective Body Armor Image Avient
10.10.2023

Dyneema®: Weight Savings of up to 20% in Protective Body Armor

Dyneema® announced the launch of a next-generation unidirectional (UD) material innovation based on its third-generation fiber at the polymer level: a development poised to enhance the safety and mobility of law enforcement officers and military forces through molecular engineering.

This evolution enables a higher-tenacity fiber – resulting in increased ballistic stopping power when used in the new UD material, Dyneema® SB301, for protective armor applications. The seismic shift in performance enables body armor manufacturers to design soft armor vests 10–20% lighter than previous protective solutions.

Beyond strength, Dyneema® SB301 has the advantage of being made from bio-based Dyneema® fiber, which enables a carbon footprint up to 90% lower than generic high modulus polyethylene (HMPE) fiber.

Now available for use in law enforcement vests for the US market, Dyneema® SB301 material is manufactured in Greenville, North Carolina, in compliance with the Berry Amendment, with additional markets to follow.

Dyneema® announced the launch of a next-generation unidirectional (UD) material innovation based on its third-generation fiber at the polymer level: a development poised to enhance the safety and mobility of law enforcement officers and military forces through molecular engineering.

This evolution enables a higher-tenacity fiber – resulting in increased ballistic stopping power when used in the new UD material, Dyneema® SB301, for protective armor applications. The seismic shift in performance enables body armor manufacturers to design soft armor vests 10–20% lighter than previous protective solutions.

Beyond strength, Dyneema® SB301 has the advantage of being made from bio-based Dyneema® fiber, which enables a carbon footprint up to 90% lower than generic high modulus polyethylene (HMPE) fiber.

Now available for use in law enforcement vests for the US market, Dyneema® SB301 material is manufactured in Greenville, North Carolina, in compliance with the Berry Amendment, with additional markets to follow.

“In every situation, weight is now considered to be the top priority after ballistic stopping power,” said Marcelo van de Kamp, global business director for personal protection at Avient. “That’s because survivability is directly tied to weight savings when speed and agility determine outcomes. We’ve long been known as the ‘world’s strongest fiber™,’ but that won’t stop us from finding new opportunities to get stronger. This new product is the latest demonstration of our commitment to both innovation and protection.”

Source:

Avient Corporation

Polartec PS Photo Polartec
09.10.2023

Polartec: Plant-based nylon resulting in a 50% lower carbon footprint vs. virgin nylon

Polartec, will upgrade two of its product platforms now using Biolon™ *, plant-based nylon fiber and membrane setting a new standard in sustainability for performance fabrics. Polartec®  Power Shield™ and Power Stretch™ Pro fabrics containing Biolon™ fibers and membranes will premiere this autumn.

Biolon™ is a renewable, non-GMO plant-based nylon with a 50% lower carbon footprint than virgin Nylon 6,6.  Biolon™ nylon properties  are closer to Nylon 6,6 than many recycled nylon alternatives currently on the market.  Biolon™ has re-worked a staple, making the best, better in terms of performance and sustainability. Its plant-based inputs account for approximately half (45-48%) of the nylon content in the fibers and membranes in new Polartec® Power Shield™ and Power Stretch™ Pro fabrics debuting this fall.

Polartec, will upgrade two of its product platforms now using Biolon™ *, plant-based nylon fiber and membrane setting a new standard in sustainability for performance fabrics. Polartec®  Power Shield™ and Power Stretch™ Pro fabrics containing Biolon™ fibers and membranes will premiere this autumn.

Biolon™ is a renewable, non-GMO plant-based nylon with a 50% lower carbon footprint than virgin Nylon 6,6.  Biolon™ nylon properties  are closer to Nylon 6,6 than many recycled nylon alternatives currently on the market.  Biolon™ has re-worked a staple, making the best, better in terms of performance and sustainability. Its plant-based inputs account for approximately half (45-48%) of the nylon content in the fibers and membranes in new Polartec® Power Shield™ and Power Stretch™ Pro fabrics debuting this fall.

Ramesh Kesh, Senior Vice President – Government & Defense and Polartec at Milliken & Company said, “For a long time, many thought that sustainable options meant a loss in performance, like durability, Polartec has proved that this is not the case. Challenging a technology already considered to be at the pinnacle of performance was a big ask yet the team at Polartec rose to that challenge and we believe we have created a new standard in sustainability for performance fabrics.” 

More information:
Polartec Biolon nylon
Source:

Abi Youcha (Akimbo Communication)

09.10.2023

Carbios: 2023 Half-Year Results

  • Confirmation of industrial and commercial targets with the construction in France of the world's first plant using Carbios' PET biorecycling technology: progress in line with the target of commissioning the unit in 2025
  • Exclusive global partnership with Novozymes, guaranteeing the supply of enzymes on an industrial scale for Carbios' PET biorecycling plant and all future licensed plants
  • Consolidation of the partnership with Indorama Ventures, which plans to raise around €110 million for this first plant
  • 54 million in aid from the French government via France 2030 and the Grand-Est Region to finance construction of the plant and accelerate R&D work
  • Strengthening of the Carbios Group's financial structure: successful capital increase of €141 million with French and international investors
  • Carbios Group cash position of €78 million at 30 June 2023, not including the net proceeds of the €141 million capital increase received in the second half of 2023
  • Confirmation of industrial and commercial targets with the construction in France of the world's first plant using Carbios' PET biorecycling technology: progress in line with the target of commissioning the unit in 2025
  • Exclusive global partnership with Novozymes, guaranteeing the supply of enzymes on an industrial scale for Carbios' PET biorecycling plant and all future licensed plants
  • Consolidation of the partnership with Indorama Ventures, which plans to raise around €110 million for this first plant
  • 54 million in aid from the French government via France 2030 and the Grand-Est Region to finance construction of the plant and accelerate R&D work
  • Strengthening of the Carbios Group's financial structure: successful capital increase of €141 million with French and international investors
  • Carbios Group cash position of €78 million at 30 June 2023, not including the net proceeds of the €141 million capital increase received in the second half of 2023
More information:
Carbios Indorama half-year results
Source:

Carbios

A Carbios employee loads textile onto the preparation line Photo Carbios
09.10.2023

Carbios: New textile preparation line for polyester recycling

Carbios, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, inaugurated its textile preparation line at its demonstration plant in Clermont-Ferrand.

To streamline the textile preparation phase, which is currently carried out by hand or on several lines, Carbios has developed a fully integrated and automated line that transforms textile waste from used garments or cutting scraps into raw material suitable for depolymerization with its enzymatic biorecycling process.  

The patented line integrates all preparation stages (shredding and extraction of hard points such as buttons or fasteners), and provides Carbios with a high-performance, scalable development tool. The platform will help validate the biorecycling technology for textiles at demonstration plant scale (by 2024), and provides Carbios with expertise in working with collection and sorting operators to specify the quality of textiles and the preparation steps needed to make them suitable for enzymatic recycling.

Carbios, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, inaugurated its textile preparation line at its demonstration plant in Clermont-Ferrand.

To streamline the textile preparation phase, which is currently carried out by hand or on several lines, Carbios has developed a fully integrated and automated line that transforms textile waste from used garments or cutting scraps into raw material suitable for depolymerization with its enzymatic biorecycling process.  

The patented line integrates all preparation stages (shredding and extraction of hard points such as buttons or fasteners), and provides Carbios with a high-performance, scalable development tool. The platform will help validate the biorecycling technology for textiles at demonstration plant scale (by 2024), and provides Carbios with expertise in working with collection and sorting operators to specify the quality of textiles and the preparation steps needed to make them suitable for enzymatic recycling.

More information:
Carbios enzymatic textile recycling
Source:

Carbios

Manjushree Group enters Indian nonwovens market with Reifenhäuser Reicofil line (c) Reifenhäuser GmbH & Co. KG Maschinenfabrik
06.10.2023

Manjushree Group enters Indian nonwovens market with Reifenhäuser Reicofil line

After four decades in the packaging industry, the Manjushree Group is entering the Indian nonwovens market. The entrepreneurs rely on a flexible RF Smart Composite line from Reifenhäuser Reicofil to meet very different customer requirements.

The Manjushree Group operated a blown film line for packaging materials for the tea industry in the eastern part of India as early as 1983. In the years that followed, Manjushree Technopack Ltd. developed into one of the largest suppliers of solutions for rigid plastic products in South Asia - and the family business grew into a group with several business segments. In 2018, the entrepreneurial family repositioned itself: it sold its previous core business to a financial investor and established Manjushree Ventures with footholds in start-up financing, real estate business, and manufacturing - the largest of which is Manjushree Spntek as a producer of high-quality spunmelted fabrics.

After four decades in the packaging industry, the Manjushree Group is entering the Indian nonwovens market. The entrepreneurs rely on a flexible RF Smart Composite line from Reifenhäuser Reicofil to meet very different customer requirements.

The Manjushree Group operated a blown film line for packaging materials for the tea industry in the eastern part of India as early as 1983. In the years that followed, Manjushree Technopack Ltd. developed into one of the largest suppliers of solutions for rigid plastic products in South Asia - and the family business grew into a group with several business segments. In 2018, the entrepreneurial family repositioned itself: it sold its previous core business to a financial investor and established Manjushree Ventures with footholds in start-up financing, real estate business, and manufacturing - the largest of which is Manjushree Spntek as a producer of high-quality spunmelted fabrics.

Since February 2023, Manjushree Spntek has been producing high-performance spunmelts on an RF Smart Composite line from Reifenhäuser Reicofil - benefiting both from many years of experience in the packaging industry and from experience with Reifenhäuser's blown film lines. "We know a lot about plastic extrusion, for example when it comes to line operating parameters such as temperature and pressure. Processing is similar in both industries," explains Rajat Kedia. "The main difference is the distribution of the products: In plastic packaging, we had an established customer base and sold a lot of material to the big consumer goods manufacturers. The nonwovens market in India, on the other hand, is still forming, with thousands of small companies currently getting involved." These serve customers in their regions, such as hospitals.

The RF Smart Composite line is a standardized spunmelt line for smaller and emerging markets. The line produces nonwovens of the highest Reicofil quality with appropriately adapted throughput. This makes it ideally suited for applications in hygiene and medical technology and, with typically 8,200 annual production hours, it is extremely reliable. In addition, operators can start production quickly because in many cases the line can be integrated into existing buildings.

Before production could start, Manjushree built a new production building in Bidadi, a town an hour's drive from Bangalore International Airport. The building is designed to be sustainable: It uses natural light and fresh air, has comprehensive contamination control, and obtains almost all of its energy from renewable sources. Reifenhäuser Reicofil then installed, commissioned and tested the RF Smart Composite line.

Since February 2023, Manjushree Spntek has been producing high-quality spunmelted nonwovens, including ultra-soft fabrics and fabrics with special coatings for customers in the hygiene and medical industries. The material can be used, for example, for baby diapers and feminine hygiene products, but also for medical articles ranging from surgical gowns to surgical drapes.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

Hygienix Graphics INDA
05.10.2023

Glatfelter, Mundeo, and Sequel to Vie for Hygienix Innovation Award™

INDA, the Association of the Nonwoven Fabrics Industry, revealed the three finalists that will compete for the Hygienix Innovation Award™. Glatfelter, Mundeo, and Sequel will present their new absorbent hygiene products to senior-level leaders at Hygienix, Nov. 13-16, New Orleans, Louisiana.

Here is a summary of the finalists’ products:

Glatfelter: GlatPure™
GlatPure™ is a range of bio-based absorbent hygiene components derived from renewable materials. This product range consists of a variety of plant-based and natural topsheets, an acquisition distribution layer, an absorbent core, a newly improved backsheet, and a landing zone. Crafted from 100% renewable fibers and biodegradable materials, and enriched with bio-based binders, GlatPure™ stands as the industry’s first fully functional, fossil-fuel free range of solutions.  

INDA, the Association of the Nonwoven Fabrics Industry, revealed the three finalists that will compete for the Hygienix Innovation Award™. Glatfelter, Mundeo, and Sequel will present their new absorbent hygiene products to senior-level leaders at Hygienix, Nov. 13-16, New Orleans, Louisiana.

Here is a summary of the finalists’ products:

Glatfelter: GlatPure™
GlatPure™ is a range of bio-based absorbent hygiene components derived from renewable materials. This product range consists of a variety of plant-based and natural topsheets, an acquisition distribution layer, an absorbent core, a newly improved backsheet, and a landing zone. Crafted from 100% renewable fibers and biodegradable materials, and enriched with bio-based binders, GlatPure™ stands as the industry’s first fully functional, fossil-fuel free range of solutions.  

Mundao: Diap’Earth®
From nature to nature: Mundao brings to market DIAP’EARTH®, an industrially compostable baby diaper. This diaper provides a circular solution to the AHP waste issue. Ecoconception (DIAP’EARTH is a bio-based & plastic free diaper) makes it possible to compost the diaper in an industrial composting facility to turn it into carbon where it can become fertilizer for soil. DIAP’EARTH has been successfully composted in major French cities.

Sequel: The Sequel Spiral™ Tampon
The Sequel Spiral™ Tampon features a proprietary spiral design that is engineered to be more fluid mechanically efficient, meaning it is designed to absorb more evenly and not leak before it’s full. In August 2023 the Sequel Spiral™ Tampon received clearance from the United States Food and Drug Administration (FDA) as a medical device and the company will now begin a series of consumer trials, with broad availability expected in Q1 of 2024.

The winner of the Award will be announced at the end of the event, Thurs., Nov. 16th, at 11:30 am. Last year’s award recipient was Pads on a Roll™ by Egal Pads. Pads on a Roll is a wrapped super-thin absorbent period pad that dispenses like toilet paper in public bathroom stalls, preventing the personal embarrassment of not having a menstrual product when needed.

Conference Highlights
In addition to the award presentation, the Hygienix™ conference will focus on consumer-centric innovations, the circular economy, raw material advancements in sustainability, opportunities for advanced recycling in absorbent hygiene, optimizing the packaging footprint, new approaches for odor control, and market trends and drivers. Plus, INDA’s Government Affairs office will be in attendance to provide insights into recent regulatory and legislative issues. Participants can learn about how the current political landscape could affect the nonwovens industry.

More information:
Hygienix
Source:

INDA

Freudenberg´s Colback ECO-R and Lutradur ECO-R backings contain a recycled content of between 51 and 90 %. (c) Freudenberg
Freudenberg´s Colback ECO-R and Lutradur ECO-R backings contain a recycled content of between 51 and 90 %.
05.10.2023

Freudenberg extends ECO range for sustainable carpet backings

Freudenberg Performance Materials (Freudenberg) is extending its recently-introduced ECO range of sustainable nonwoven carpet backings: Lutradur ECO-R and Colback ECO-R backings contain high percentages of recycled raw materials. With its ECO portfolio Freudenberg supports carpet manufacturers in their transition towards an increasingly sustainable product offering.

The company launched its ECO range for sustainable primary backings earlier this year with the introduction of the ECO-RE resource-efficient backings that use less raw materials and support end product recyclability. To achieve this, Freudenberg R&D teams further developed the company’s proprietary yarn production technology allowing for extremely thin filaments.

Freudenberg Performance Materials (Freudenberg) is extending its recently-introduced ECO range of sustainable nonwoven carpet backings: Lutradur ECO-R and Colback ECO-R backings contain high percentages of recycled raw materials. With its ECO portfolio Freudenberg supports carpet manufacturers in their transition towards an increasingly sustainable product offering.

The company launched its ECO range for sustainable primary backings earlier this year with the introduction of the ECO-RE resource-efficient backings that use less raw materials and support end product recyclability. To achieve this, Freudenberg R&D teams further developed the company’s proprietary yarn production technology allowing for extremely thin filaments.

ECO-R products
Freudenberg’s spunbond nonwoven primary and secondary carpet backings contribute to manufacturers’ easy and efficient production processes as well as to high-performance end products. The company is now extending its ECO range in Europe with Colback ECO-R and Lutradur ECO-R backings that contain a recycled content of between 51 and 90%. Replacing virgin raw materials with recycled polyester saves on natural resources and improves the carbon footprint of end products. The ECO-R backings are specifically suitable for carpet tiles, broadloom, dust control mats and automotive option mats.

Source:

Freudenberg Performance Materials Holding GmbH

04.10.2023

RadiciGroup: New yarn, that optimises fabric comfort and freshness

Radilon® Chill-fit is the new solution to maximise the breathability and freshness that a fabric can offer. The highly functional nylon yarn is capable of ensuring an intrinsic and permanent thermoregulation without the need for additional treatments while offering high protection against UV rays. Visitors will be able to touch and feel the yarn for the first time at the autumn edition of Performance Days, the reference trade fair for trends and innovations in yarn, fabric and accessories, to be held in Munich (Germany) on 4 and 5 October.

Radilon® Chill-fit’s high breathability allows air and moisture to pass through quickly, keeping the wearer fresh and comfortable: a result also proven by a specific test on body temperature changes (thermocamera test) comparing a garment made with traditional yarn and one made with Chill-fit.

Radilon® Chill-fit is the new solution to maximise the breathability and freshness that a fabric can offer. The highly functional nylon yarn is capable of ensuring an intrinsic and permanent thermoregulation without the need for additional treatments while offering high protection against UV rays. Visitors will be able to touch and feel the yarn for the first time at the autumn edition of Performance Days, the reference trade fair for trends and innovations in yarn, fabric and accessories, to be held in Munich (Germany) on 4 and 5 October.

Radilon® Chill-fit’s high breathability allows air and moisture to pass through quickly, keeping the wearer fresh and comfortable: a result also proven by a specific test on body temperature changes (thermocamera test) comparing a garment made with traditional yarn and one made with Chill-fit.

Source:

RadiciGroup

fibrEX: Zentrifugalfilter nutzt den Dichteunterschiede von Kunstfasern und Wasser. © Fraunhofer UMSICHT
fibrEX: Zentrifugalfilter nutzt den Dichteunterschiede von Kunstfasern und Wasser.
28.09.2023

Neuartiger Filter entfernt Kunstfaserabrieb aus Waschwasser

Um zu verhindern, dass Mikroplastik aus Waschmaschinen in die Umwelt gelangt, haben Forschende des Fraunhofer UMSICHT den Zentrifugalfilter fibrEX entwickelt. Der flexibel integrierbare und wartungsfreie Filter trennt aus Waschwasser mikroskopisch kleine Kunstfasern ab. Aktuell werden potenzielle Partner für die letzten Schritte bis zur Markteinführung gesucht.

Textilien aus Kunstfasern wie Polyester und Elasthan halten Regen ab, sind strapazierfähig und dabei trotzdem elastisch. Ihr Anteil in hiesigen Kleiderschränken liegt bei über 60 Prozent liegt. Auch diese Kleidung muss gewaschen werden –im Fall von Sportbekleidung sogar sehr oft. Während des Waschvorgangs werden Fragmente der Kunstfasern abgerieben, die höchstens ein Fünftel so dick sind wie ein menschliches Haar. Aufgrund von Größe und Material zählen sie zu Mikroplastik, jenen mikroskopisch kleinen Kunststoffpartikeln, die – einmal in die Umwelt gelangt – nur schwer abbaubar sind.

Um zu verhindern, dass Mikroplastik aus Waschmaschinen in die Umwelt gelangt, haben Forschende des Fraunhofer UMSICHT den Zentrifugalfilter fibrEX entwickelt. Der flexibel integrierbare und wartungsfreie Filter trennt aus Waschwasser mikroskopisch kleine Kunstfasern ab. Aktuell werden potenzielle Partner für die letzten Schritte bis zur Markteinführung gesucht.

Textilien aus Kunstfasern wie Polyester und Elasthan halten Regen ab, sind strapazierfähig und dabei trotzdem elastisch. Ihr Anteil in hiesigen Kleiderschränken liegt bei über 60 Prozent liegt. Auch diese Kleidung muss gewaschen werden –im Fall von Sportbekleidung sogar sehr oft. Während des Waschvorgangs werden Fragmente der Kunstfasern abgerieben, die höchstens ein Fünftel so dick sind wie ein menschliches Haar. Aufgrund von Größe und Material zählen sie zu Mikroplastik, jenen mikroskopisch kleinen Kunststoffpartikeln, die – einmal in die Umwelt gelangt – nur schwer abbaubar sind.

„Zwischen 20 und 35 Prozent des weltweit verbreiteten Mikroplastiks sind synthetische Mikrofasern aus Textilien. Synthetische Textilien sind demnach eine der größten Mikroplastik-Quellen und stehen im Fokus von Politik und Gesellschaft“, so Dr.-Ing. Ilka Gehrke, Leiterin der Abteilung Umwelt und Ressourcennutzung am Fraunhofer UMSICHT. Auf europäischer Ebene laufen bereits Prozesse zur Vorbereitung von Richtlinien gegen die Freisetzung von synthetischen Mikrofasern. „In Frankreich etwa dürfen ab 2025 keine Waschmaschinen ohne Mikrofaserfilter mehr in Verkehr gebracht werden.“

Bisher sind kaum Waschmaschinen mit entsprechenden Filtern auf dem kommerziellen Markt erhältlich. Und solche, die es zu kaufen gibt, halten zwar die Mikrofasern zurück, verlieren aber schnell an Leistung. Die Kleinstfasern werden am Filtermaterial zurückgehalten, bilden eine Deckschicht und führen so zur Verblockung des Filters. Im schlimmsten Fall kann kein Waschwasser mehr abfließen, sodass der Waschprozess zum Stillstand kommt.

Als Lösung dieses Problems haben Forschende des Fraunhofer UMSICHT den kürzlich patentierten Zentrifugalfilter fibrEX entwickelt. Anders als ein Siebsystem, nutzt er die Dichteunterschiede von Kunstfasern und Wasser und trennt beim Schleudern die beiden Komponenten voneinander. Der Zentrifugalfilter kann sowohl in die Waschmaschine eingebaut als auch als externes Gerät betrieben werden; zum Betrieb wird keine weitere nennenswerte Energie benötigt.

Nach einer einjährigen Testphase im Waschlabor und technischen Optimierungen hält fibrEX nun dauerhaft und wartungsfrei mindestens 80 Prozent der synthetischen Mikrofasern aus dem Waschwasser zurück. Es werden Waschmaschinenhersteller gesucht, fibrEX gemeinsam zur Marktreife zu bringen.

ANDRITZ: Extra-wide carding machine for Italian nonwovens producer (c) ANDRITZ
From left to right: Mr. Gianni Boscolo, CEO of Albis, and Mr. Fabien Ravier, Managing Director of ANDRITZ Asselin-Thibeau
27.09.2023

ANDRITZ: Extra-wide carding machine for Italian nonwovens producer

International technology group ANDRITZ has successfully started up the new carding machine and opening/blending line it delivered to Albis in Roasio, Vercelli, Italy.

With its large working width of 5.10 meters, the machine allows for the production of nonwoven fabrics tailored to specific customer requirements while maintaining excellent properties and consistent quality. One example is Albis Curacell ®, a multilayer composite nonwoven fabric in a weight range between 35 and 70 gsm that is produced with a fully water-free patented process and is able to absorb liquid flows of over seven times its own weight. The production line also includes an advanced upstream opening and blending system from ANDRITZ.

Albis, a privately owned group founded in Italy in 1995 by Gianni Boscolo, has been a major player in the nonwoven market for over three decades. Through continuous research and development, the company offers innovative, high-quality nonwoven solutions across various sectors, including hygiene, medical, personal care, textiles, filtration, and agriculture.

International technology group ANDRITZ has successfully started up the new carding machine and opening/blending line it delivered to Albis in Roasio, Vercelli, Italy.

With its large working width of 5.10 meters, the machine allows for the production of nonwoven fabrics tailored to specific customer requirements while maintaining excellent properties and consistent quality. One example is Albis Curacell ®, a multilayer composite nonwoven fabric in a weight range between 35 and 70 gsm that is produced with a fully water-free patented process and is able to absorb liquid flows of over seven times its own weight. The production line also includes an advanced upstream opening and blending system from ANDRITZ.

Albis, a privately owned group founded in Italy in 1995 by Gianni Boscolo, has been a major player in the nonwoven market for over three decades. Through continuous research and development, the company offers innovative, high-quality nonwoven solutions across various sectors, including hygiene, medical, personal care, textiles, filtration, and agriculture.

Source:

ANDRITZ AG

25.09.2023

Coloreel: Million-dollar deal with major Asian manufacturer

Coloreel has signed a two million dollar deal with a prominent Asian manufacturer. This agreement is a milestone for Coloreel and its innovative product.

The new partnership underscores Coloreel's capacity to meet the growing demand for innovative and sustainable solutions among manufacturers and brands worldwide. While the initial delivery of the on-demand digital thread-dying units is set for October this year, the majority of the volume will be shipped during 2024.

The Swedish company has rapidly gained recognition for its pioneering innovation in embroidery. The technology enables manufacturers to instantly dye a white thread into an unlimited spectrum of colors, all in real-time. At the same time, the technology makes production more efficient by using digital processes and automation, while saving up to 97% of water compared to traditional thread dyeing.

Coloreel has signed a two million dollar deal with a prominent Asian manufacturer. This agreement is a milestone for Coloreel and its innovative product.

The new partnership underscores Coloreel's capacity to meet the growing demand for innovative and sustainable solutions among manufacturers and brands worldwide. While the initial delivery of the on-demand digital thread-dying units is set for October this year, the majority of the volume will be shipped during 2024.

The Swedish company has rapidly gained recognition for its pioneering innovation in embroidery. The technology enables manufacturers to instantly dye a white thread into an unlimited spectrum of colors, all in real-time. At the same time, the technology makes production more efficient by using digital processes and automation, while saving up to 97% of water compared to traditional thread dyeing.

More information:
Coloreel
Source:

Coloreel

25.09.2023

ARC Research Hub to support sustainable manufacturing of fibre materials

In August 2023, Australian Research Council (ARC) Chief Research Officer Professor Christina Twomey officially launched the ARC Research Hub for Functional and Sustainable Fibres.

Through collaboration with 16 domestic and international Partner Organisations, the team at the ARC Research Hub will be conducting research across three core themes – Sustainability, Circular Economies, and Extraordinary Functionality.

Led by Deakin University, the ARC Research Hub aims to harness Australia’s research capacity in fibre, textiles, and composite materials to develop materials with enhanced functionality, meeting Australian consumer and industrial demand for advanced fibre capabilities including recycling and re-purposing textile waste.
 
Professor Twomey said that the ARC Research Hub is fundamental to increasing collaboration between Australia’s most innovative researchers and vital industries.

In August 2023, Australian Research Council (ARC) Chief Research Officer Professor Christina Twomey officially launched the ARC Research Hub for Functional and Sustainable Fibres.

Through collaboration with 16 domestic and international Partner Organisations, the team at the ARC Research Hub will be conducting research across three core themes – Sustainability, Circular Economies, and Extraordinary Functionality.

Led by Deakin University, the ARC Research Hub aims to harness Australia’s research capacity in fibre, textiles, and composite materials to develop materials with enhanced functionality, meeting Australian consumer and industrial demand for advanced fibre capabilities including recycling and re-purposing textile waste.
 
Professor Twomey said that the ARC Research Hub is fundamental to increasing collaboration between Australia’s most innovative researchers and vital industries.

“The ARC has a proud history of supporting outstanding research that benefits the Australian community, and the ARC Research Hub for Functional and Sustainable Fibres is a great example of this,” Professor Twomey said.
 
“In collaboration with industry partners, the research team are building on the work undertaken by the ARC Research Hub for a World-class Future Fibre Industry which ended in 2021 – this continued success is no easy feat.

“This new ARC Research Hub will strengthen productivity and competitiveness of the advanced manufacturing sector and will place Australia at the forefront of a global shift towards functional and sustainable materials.”
 
The ARC is investing $5 million over 5 years under the ARC Industrial Transformation Research Program.

It is expected that the ARC Research Hub will address the immediate need to reduce industry’s reliance on petroleum-derived materials and to reduce the environmental impact of supply chains.

Source:

Australian Research Council

Bac Mono Photo Hypetex
22.09.2023

Hypetex: Coloured carbon fibre replacing paint coating

•    First production supercar created with Hypetex coloured carbon fibre
•    Paint-replacement technology reduces weight to enhance performance

British car manufacturer Briggs Automotive Company (BAC) has created a unique Hypetex coloured carbon fibre version of its Mono R, reducing the weight by removing the need for paint.  

The original BAC Mono R was created to be lighter and more powerful than the standard model, with 343bhp and 555kg total weight, equating to a power-to-weight ratio of 618bhp-per-tonne. By removing the need for paint coatings in this version, the net weight of the exterior is reduced compared to a painted shell, resulting in a further improved overall performance.

The car’s body was created using Hypetex’s titanium carbon fibre twill, and finished with a crystalized lacquer, offering a unique aesthetic finish. The ultra-lightweight supercar can accelerate from zero to 60mph in less than 2.5 seconds.  

•    First production supercar created with Hypetex coloured carbon fibre
•    Paint-replacement technology reduces weight to enhance performance

British car manufacturer Briggs Automotive Company (BAC) has created a unique Hypetex coloured carbon fibre version of its Mono R, reducing the weight by removing the need for paint.  

The original BAC Mono R was created to be lighter and more powerful than the standard model, with 343bhp and 555kg total weight, equating to a power-to-weight ratio of 618bhp-per-tonne. By removing the need for paint coatings in this version, the net weight of the exterior is reduced compared to a painted shell, resulting in a further improved overall performance.

The car’s body was created using Hypetex’s titanium carbon fibre twill, and finished with a crystalized lacquer, offering a unique aesthetic finish. The ultra-lightweight supercar can accelerate from zero to 60mph in less than 2.5 seconds.  

Hypetex’s paint-replacement technology retains the visible weave, allowing for a bold design and a choice of colours without technical compromises, perfectly aligning with BAC’s initiatives to maximise performance whilst creating bespoke supercars. Paint generally adds 138 grams per metre squared, whereas Hypetex adds just 17 grams for the same area, offering an 8x weight saving.
This bespoke version of BAC’s single-seater Mono R was subject to BAC’s renowned BAC Bespoke programme, which ensures that no two Monos are the same. The client, a US-based collector, worked with BAC’s design team to design the car to their personal taste.   

Born out of Formula 1 technology, Hypetex offers manufacturers sustainable aesthetic materials with technical and efficiency benefits. This collaboration is an all-British success story, with the Hypetex carbon fibre body built by Formaplex, a leading UK-based manufacturing company who manufacture lightweight engineered solutions for top tier customers in Automotive, Aerospace and Defence markets. BAC’s supply chain is 95% UK-based.  

Hypetex continues to expand its growing portfolio of the use of coloured carbon fibre to add personalisation to the automotive field, with its material recently featured on the 2024 Ford Mustang Dark Horse.  

 

More information:
HYPETEX® carbon fibers
Source:

Hypetex

22.09.2023

Lenzing receives EU Ecolabel for fiber production in Indonesia

The Lenzing Group has received certification from the internationally recognized EU Ecolabel for its fibers at the Indonesian site. This means that Lenzing fibers produced in Purwakarta (PT. South Pacific Viscose) meet high environmental standards. The product portfolio thus expands and qualifies for the production of LENZING™ ECOVERO™ brand fibers for textiles and VEOCEL™ brand fibers for nonwoven applications.

The substantial investment of EUR 100 mn to modernize the Indonesian site has enabled Lenzing to significantly reduce its specific emissions. In addition, the site recently began sourcing energy from renewable sources and is driving the conversion to biomass in line with Lenzing's goals of reducing group-wide carbon emissions per ton of product sold by 50 percent by 2030 and achieving carbon-neutral production by 2050.

The Lenzing Group has received certification from the internationally recognized EU Ecolabel for its fibers at the Indonesian site. This means that Lenzing fibers produced in Purwakarta (PT. South Pacific Viscose) meet high environmental standards. The product portfolio thus expands and qualifies for the production of LENZING™ ECOVERO™ brand fibers for textiles and VEOCEL™ brand fibers for nonwoven applications.

The substantial investment of EUR 100 mn to modernize the Indonesian site has enabled Lenzing to significantly reduce its specific emissions. In addition, the site recently began sourcing energy from renewable sources and is driving the conversion to biomass in line with Lenzing's goals of reducing group-wide carbon emissions per ton of product sold by 50 percent by 2030 and achieving carbon-neutral production by 2050.

Anthropogenic climate change is one of the most pressing problems of our time, to which both the global textile and nonwovens industries make a major contribution. LENZING™ ECOVERO™ viscose fibers (for textiles) and VEOCEL™ Viscose (for nonwovens) have been proven to cause significantly less greenhouse gas emissions and water pollution than conventional viscose. At the Indonesian site, Lenzing also plans to produce the innovative LENZING™ ECOVERO™ Black fibers in the future, which also require less energy and water in textile chain thanks to the spun-dyeing process and thus also have a lower carbon footprint in their life cycle as a textile product.

Source:

Lenzing Group

22.09.2023

INDA Partners & Waterloo Filtration Institute: Partnering for the FiltXPO™ 2023 Technical Program

INDA, the Association of the Nonwoven Fabrics Industry, is partnering with the Waterloo Filtration Institute to deliver the FiltXPO™ technical program on October 10-11, 2023 in Chicago, Illinois. The Waterloo Filtration Institute was instrumental in recommending program topics and world-class presenters.

Engineers, scientists, and industry professionals will gain the latest insights into the filtration and separation topics affecting the industry today and into the future. The program features presentations include: filter media technologies, advancements and opportunities in filtration machinery and equipment, innovations in clean air for homes and urban areas, standards and testing, industry trends and new developments, and filtration challenges and opportunities.

The keynote for this year’s event is “IAQ Is the New Black” presented by Suzanne Shelton, President & CEO, Shelton Group. Shelton will share the latest data around consumer views on health, safety, people, and the planet. Participants will gain an understanding of the filtration opportunities and the challenges manufacturers face in communicating the value of their products.

INDA, the Association of the Nonwoven Fabrics Industry, is partnering with the Waterloo Filtration Institute to deliver the FiltXPO™ technical program on October 10-11, 2023 in Chicago, Illinois. The Waterloo Filtration Institute was instrumental in recommending program topics and world-class presenters.

Engineers, scientists, and industry professionals will gain the latest insights into the filtration and separation topics affecting the industry today and into the future. The program features presentations include: filter media technologies, advancements and opportunities in filtration machinery and equipment, innovations in clean air for homes and urban areas, standards and testing, industry trends and new developments, and filtration challenges and opportunities.

The keynote for this year’s event is “IAQ Is the New Black” presented by Suzanne Shelton, President & CEO, Shelton Group. Shelton will share the latest data around consumer views on health, safety, people, and the planet. Participants will gain an understanding of the filtration opportunities and the challenges manufacturers face in communicating the value of their products.

A preview of the subject matter experts includes:

  • AAF Flanders – “Air Filter Standards Activity and What It Means for Innovation”
  • Ahlstrom – “Expanding Wetlaid Filtration Media Performance Through Innovation”
  • Air Techniques International – “Application of Automated Filter Tester in Quality Control Testing: Importance of Consistent Aerosol Particle Size Distribution”
  • American Truetzschler, Inc. – “How Really Good Filter Media Is Made”
  • CEREX Advanced Fabrics – “The Antimicrobial Nylon Advantage”
  • Elsner Engineering Works, Inc. – “When Does Automation Make Sense”
  • Hollingsworth & Vose – “Accelerating Membrane Adoption with ROI”
  • INDA – “Beyond Porter’s Five Forces – When Regulation Reshapes Markets”
  • MANN+HUMMEL GmbH – “Filtration for Cleaner Urban Mobility – Introducing Horizon Europe Innovation Action Aersolfd”
  • NatureWorks – “Optimizing Biopolymers to Improve Filter Performance – A Spectrum of Approaches and Opportunities”
  • Palas GmbH – “Influence of Temperature and Humidity to Filter Efficiency and Dust Holding Capacity”
  • Ptak Consulting – “Residential Filtration – Performance Against Infectious Aerosols”
  • The University of Georgia – “Recent Advances in Melt Blown Nonwovens and Filter Media Research”

New this year to FiltXPO are Lightning Talks. Lightning Talks are an opportunity to connect with new trends, products, innovations, and ideas with speakers rotating every eight minutes. Presenting companies include Ahlstrom, Elsner Engineering Works, Inc., Gottlieb Binder GmbH, TSI, and the Waterloo Filtration Institute.

The FiltXPO exhibition takes place October 10-12 and will run concurrently with the technical program.

More information:
INDA Filtxpo Conference
Source:

INDA, the Association of the Nonwoven Fabrics Industry

20.09.2023

BVMed begrüßt Ausnahmeregelung für aufsaugende Inkontinenzprodukte

Der Bundesverband Medizintechnologie (BVMed) begrüßt die Entscheidung der EU-Kommission, Medizinprodukte wie aufsaugende Inkontinenzhilfen von den Kriterien des EU-Ökolabels für absorbierende Hygieneprodukte nach der europäischen Ökodesign-Verordnung auszunehmen. Der BVMed hatte sich in einer Stellungnahme aus April 2023 dafür ausgesprochen, Medizinprodukte vom Anwendungsbereich auszunehmen und „aufsaugende Inkontinenzprodukte“ aufgrund ihrer medizinischen Zweckbestimmung von Hygieneprodukten abzugrenzen, um die Patient:innen-Versorgung nicht zu gefährden. „Medizinprodukte unterliegen bereits einer sehr strengen sektoralen Regulierung. Es ist gut, dass die EU-Kommission bei Güterabwägungen der Versorgung von Patient:innen mit notwendigen Medizinprodukten ein hohes Gewicht einräumt“, kommentiert BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

Der Bundesverband Medizintechnologie (BVMed) begrüßt die Entscheidung der EU-Kommission, Medizinprodukte wie aufsaugende Inkontinenzhilfen von den Kriterien des EU-Ökolabels für absorbierende Hygieneprodukte nach der europäischen Ökodesign-Verordnung auszunehmen. Der BVMed hatte sich in einer Stellungnahme aus April 2023 dafür ausgesprochen, Medizinprodukte vom Anwendungsbereich auszunehmen und „aufsaugende Inkontinenzprodukte“ aufgrund ihrer medizinischen Zweckbestimmung von Hygieneprodukten abzugrenzen, um die Patient:innen-Versorgung nicht zu gefährden. „Medizinprodukte unterliegen bereits einer sehr strengen sektoralen Regulierung. Es ist gut, dass die EU-Kommission bei Güterabwägungen der Versorgung von Patient:innen mit notwendigen Medizinprodukten ein hohes Gewicht einräumt“, kommentiert BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

Der BVMed unterstützt die Zielsetzung der EU-Kommission, die ökologische Nachhaltigkeit von Produkten über ihren gesamten Lebenszyklus zu steigern. „Die Medizintechnik-Branche ist sich ihrer gesellschaftlichen Verantwortung bewusst und arbeitet bereits jetzt intensiv daran, die nachteiligen Auswirkungen ihrer Produkte in Bezug auf die Umwelt zu minimieren, ohne die Funktionalität und Sicherheit in der Versorgung der Patient:innen zu gefährden“, heißt es in der BVMed-Stellungnahme. Wichtig sei, dass die Versorgung und Sicherheit der Patient:innen durchgängig sowie vollumfänglich gewährleistet seien und es zu keinen Unterbrechungen der Versorgung durch Produktengpässe komme.

Das Inverkehrbringen von Medizinprodukten ist über die EU-Medizinprodukte-Verordnung (MDR) geregelt. In dieser sektorspezifischen Regelung sind umfangreiche Voraussetzungen für die Sicherheits- und Leistungsanforderungen von teilweise lebensnotwendigen Produkten für die Gesundheitsversorgung festgelegt.

Rechtsakte, wie unter anderem die Verordnung über Ökodesign, können zu Änderungen von Produkten oder deren Bestandteilen führen und somit neue und langwierige Konformitätsbewertungsverfahren nach sich ziehen, sofern Alternativmaterialien überhaupt vorhanden sind. Dafür müssen umfangreiche Tests durchgeführt und zusätzliche klinische Daten erhoben sowie die komplette Produktdokumentation überarbeitet werden. Dieser Prozess dauert erfahrungsgemäß mehrere Jahre, abhängig von der vorgenommenen Änderung. Allein die Zertifizierung eines Medizinprodukts durch eine Benannte Stelle dauert im Zuge der MDR aktuell durchschnittlich 18 Monate.

Erschwerend kommt hinzu, dass bereits jetzt aufgrund der Implementierung der MDR Kapazitätsengpässe bei den Benannten Stellen bestehen, die die Patient:innen-Versorgung mit sicheren und bewährten Medizinprodukten gefährden. „Diese Situation verschärft sich mit jeder Änderung der regulatorischen Anforderungen, die die Neubewertung von Produkten durch Benannte Stellen erforderlich macht“, so der BVMed.

BVMed-Nachhaltigkeitsexpertin Clara Allonge: „Um mit der Ökodesign-Verordnung einen robusten Rahmen für eine erfolgreiche europäische Nachhaltigkeitsinitiative zu schaffen, ist entscheidend, die branchenspezifischen Besonderheiten, die medizinischen Zweckbestimmungen und die Sicherstellung der Gesundheitsversorgung bei der Ausgestaltung auch künftig zu berücksichtigen.“

Der BVMed repräsentiert über 300 Hersteller, Händler und Zulieferer der Medizintechnik-Branche sowie Hilfsmittel-Leistungserbringer und Homecare-Versorger. Die Medizinprodukteindustrie beschäftigt in Deutschland über 250.000 Menschen und investiert rund 9 Prozent ihres Umsatzes in Forschung und Entwicklung. Der Gesamtumsatz der Branche liegt bei über 38 Milliarden Euro, die Exportquote bei 67 Prozent. Dabei sind 93 Prozent der MedTech-Unternehmen KMU. Der BVMed ist die Stimme der deutschen MedTech-Branche und vor allem des MedTech-Mittelstandes.

Source:

BVMed | Bundesverband Medizintechnologie e.V.