From the Sector

Reset
155 results
Trützschler Nonwovens auf der IDEA (c) Trützschler Nonwovens & Man-Made Fibers GmbH
A Carded/Pulp (CP) line for biodegradable composite nonwovens from pulp and viscose fibers
21.02.2022

Trützschler Nonwovens at IDEA

IDEA, the North American nonwovens show, will take place in Miami from March 28th to 31st. Trützschler’s booth focuses on the needs of the American market. It's about local service, the efficient production of sustainable nonwovens and the digital support of production processes.

Tomorrow’s products are sustainable
In addition to the in-depth know-how, Trützschler Nonwovens has a broad portfolio of line concepts for the production of sustainable, biodegradable nonwovens. Cotton is an important raw material for American producers, which is why Trützschler is showing solutions for processing raw cotton, comber noils and blends of viscose and cotton. Another focus is on the Voith/Trützschler concepts for wet-laid, hydroentangled WLS and CP nonwovens. Nonwovens made from viscose fibers and NBSK pulp, the raw material for the paper industry, not only offer a good cost/performance ratio, but also a small CO2 footprint.

IDEA, the North American nonwovens show, will take place in Miami from March 28th to 31st. Trützschler’s booth focuses on the needs of the American market. It's about local service, the efficient production of sustainable nonwovens and the digital support of production processes.

Tomorrow’s products are sustainable
In addition to the in-depth know-how, Trützschler Nonwovens has a broad portfolio of line concepts for the production of sustainable, biodegradable nonwovens. Cotton is an important raw material for American producers, which is why Trützschler is showing solutions for processing raw cotton, comber noils and blends of viscose and cotton. Another focus is on the Voith/Trützschler concepts for wet-laid, hydroentangled WLS and CP nonwovens. Nonwovens made from viscose fibers and NBSK pulp, the raw material for the paper industry, not only offer a good cost/performance ratio, but also a small CO2 footprint.

Digital solutions optimize the production floor
In order to ensure lasting quality, Trützschler Nonwovens presents a modular, digital work environment that systematizes, digitizes and simplifies typical work processes. With the help of Industry 4.0 technologies, line, process and quality data relevant to a production lot can be stored, aggregated, visualized and analyzed with regard to process improvements.

Trützschler USA
With its headquarters in Charlotte, North Carolina, and more than 100 employees, Trützschler USA is the first point of contact for all matters relating to American nonwovens producers. The company is able to equip and convert machines according to customer specifications (certified UL508A panel shop), carry out factory acceptance tests and a wide range of repairs in Charlotte.

Source:

Trützschler Nonwovens & Man-Made Fibers GmbH

(c) JUMBO-Textil GmbH & Co. KG
18.02.2022

JUMBO­-Textil: High-tech textiles for exoskeletons

Production and care, logistics and agriculture – people in these and many other industries work hard day after day. Exoskeletons offer them enormous relief in this regard. And in rehabilitation, these innovative "power suits" help patients expand their motor capabilities and extend their mobility. The central component of the exoskeleton is elastic narrow textiles.

Every gram counts
Exoskeletons also require lightweight components. And every gram counts here. Textiles are particularly light materials in themselves and JUMBO-Textil's elastics are also suitable for replacing heavier parts made of or containing plastic or metal. For example, they replace springs, buckles or other fasteners.

Production and care, logistics and agriculture – people in these and many other industries work hard day after day. Exoskeletons offer them enormous relief in this regard. And in rehabilitation, these innovative "power suits" help patients expand their motor capabilities and extend their mobility. The central component of the exoskeleton is elastic narrow textiles.

Every gram counts
Exoskeletons also require lightweight components. And every gram counts here. Textiles are particularly light materials in themselves and JUMBO-Textil's elastics are also suitable for replacing heavier parts made of or containing plastic or metal. For example, they replace springs, buckles or other fasteners.

Good for your back – and your skin
Exoskeletons need skin-friendly components. Depending on the model and ambient temperature, exoskeletons are also worn directly on the skin. This is why JUMBO-Textil does not compromise when it comes to wearing comfort: whether elasticated hook-and-loop belts or slip-proof woven tapes, the surface of the textiles is pleasantly soft. And to prevent moisture accumulating, the textiles are always permeable to air. They are free from harmful substances and meet OEKO-TEX Standard 100 PK1.

Innovative production technology – complex textile architecture
Exoskeletons need safe and stable components. JUMBO-Textil's production technology is always state-of-the-art. This allows for very different, and complex stable textile structures – from elastic buttonhole braids to multi-branched elastic hole cords.

Source:

JUMBO-Textil GmbH & Co. KG / stotz-design.com 

BRÜCKNER presents products for the nonwovens industry at IDEA (c) Brückner Textile Technologies GmbH & Co. KG
SUPRA-FLOW BX double belt thermofusion oven for Nonwovens
18.02.2022

BRÜCKNER presents products for the nonwovens industry at IDEA

For more than 70 years BRÜCKNER has been in the construction of drying and finishing lines for the textile and nonwovens industry. In the nonwovens sector, the company supplies worldwide thermofusion ovens, dryers, coating and heat-setting lines. On the IDEA 2022 trade fair in Miami, USA, BRÜCKNER presents together with its American representation FI-TECH new machine concepts and solutions for different applications in the mentioned fields.

The production of nonwovens always requires a bonding process after the nonwovens formation, where the loosely laid fibers are bonded to a resilient fiber composite. For this purpose, depending on the process, different ovens and dryers are used. BRÜCKNER supplies the necessary lines for all applications. The production program is completed by different impregnation and coating units as well as slitting and winding equipment. BRÜCKNER's customers produce geo nonwovens, filter media, hygiene and medical textiles or different fabrics for the automotive and transport industry

For more than 70 years BRÜCKNER has been in the construction of drying and finishing lines for the textile and nonwovens industry. In the nonwovens sector, the company supplies worldwide thermofusion ovens, dryers, coating and heat-setting lines. On the IDEA 2022 trade fair in Miami, USA, BRÜCKNER presents together with its American representation FI-TECH new machine concepts and solutions for different applications in the mentioned fields.

The production of nonwovens always requires a bonding process after the nonwovens formation, where the loosely laid fibers are bonded to a resilient fiber composite. For this purpose, depending on the process, different ovens and dryers are used. BRÜCKNER supplies the necessary lines for all applications. The production program is completed by different impregnation and coating units as well as slitting and winding equipment. BRÜCKNER's customers produce geo nonwovens, filter media, hygiene and medical textiles or different fabrics for the automotive and transport industry

For the production of highloft nonwovens the double-belt thermofusion oven SUPRA-FLOW BX is used. This oven system operates according to the air-through principle and can be perfectly adapted to the product requirements in terms of flow speed, flow direction and temperature on a field-by-field basis.  
The SUPRA-FLOW BX can produce nonwovens up to a thickness of 280 mm and a basis weight of max. 8 kg/m². The available working widths vary between 2400 and 5200 mm at production speeds of up to 100 m/min.  
For geotextile projects, the POWER-FRAME stenter is usually used, which impresses with its uniformity in terms of temperature distribution as well as productivity. In addition, the fabric can be stretched in a targeted manner by transporting it in the stenter chain. This has a controlled influence on fabric width, fiber orientation and fabric shrinkage. Working widths of up to over 7 meters are not uncommon with geotextile finishing systems.

More information:
Brückner IDEA nonwovens
Source:

Brückner Textile Technologies GmbH & Co. KG

(c) Archroma
01.02.2022

Archroma launches a new vegan textile softener

Archroma announced the launch of EARTH SOFT, a new softening system for textile and fashion applications, based on Archroma's latest innovation, a vegan silicone softener, Siligen® EH1, with 35% plant-based active content.

Siligen® EH1 is the latest addition in the plant-based innovations developed by Archroma in recent years, such as EarthColors® dyes and Appretan® NTR binders, as alternatives offered to manufacturers and brands looking to reduce the use of fossil fuel based ingredients without compromising performance.

The range has been developed in line with the principles of “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”. More than 35% of the Siligen® EH1 softener's active content is based on plant-based, renewable raw materials. In addition, the product features ultralow cyclic siloxanes (D4, D5, D6) which are classified by the European Chemicals Agency as “Substances of Very High Concern” due to their very persistent and bioaccumulative properties.

Archroma announced the launch of EARTH SOFT, a new softening system for textile and fashion applications, based on Archroma's latest innovation, a vegan silicone softener, Siligen® EH1, with 35% plant-based active content.

Siligen® EH1 is the latest addition in the plant-based innovations developed by Archroma in recent years, such as EarthColors® dyes and Appretan® NTR binders, as alternatives offered to manufacturers and brands looking to reduce the use of fossil fuel based ingredients without compromising performance.

The range has been developed in line with the principles of “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”. More than 35% of the Siligen® EH1 softener's active content is based on plant-based, renewable raw materials. In addition, the product features ultralow cyclic siloxanes (D4, D5, D6) which are classified by the European Chemicals Agency as “Substances of Very High Concern” due to their very persistent and bioaccumulative properties.

Siligen® EH1 is ideally suited for shirts, underwear, sportswear, towels, bed sheets, etc. as it provides an excellent wearing comfort by supporting a good moisture transportation and delivering a smooth and soft touch.

The new softener, and the EARTH SOFT system which also includes a Hydroperm® wicking agent to boost hydrophilic properties on synthetic and blended fibers, can be applied on all natural and synthetic textile fibers.

Siligen® EH1 is suitable for both woven and knitted articles. It can be applied by padding process, as well as by exhaust process as it shows a very good shear stability and a low foaming profile. It can be used on white articles and those treated with optical brighteners, as it doesn’t cause thermomigration nor phenolic yellowing.

Paul Cowell, Head of Competence Centers for Brand & Performance Textile Specialties at Archroma, comments: “The new EARTH SOFT system based on Siligen® EH1 softener adds to our growing portfolio of innovations based on natural and renewable plant-based resources. This new breakthrough innovation by Archroma helps us and our partners in the textile and fashion industry to minimize our dependence on petroleum fossil fuel products.”

Source:

Archroma

(c) Messe Frankfurt (HK) Ltd.
21.01.2022

Promising conditions for Cinte Techtextil China in September

Promising conditions in the technical textiles and nonwovens market are expected to provide ample opportunities for suppliers at this year’s Cinte Techtextil China. The fair, which last year saw 366 exhibitors and 14,868 visits, will take place from 6 – 8 September 2022 at the Shanghai New International Expo Centre. Flexible exhibiting options will once again be available for overseas companies.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd, explained the positive conditions that exhibitors should expect at the fair thusly: “The pandemic has led to a surge in Chinese exports of both technical textiles and nonwovens, the latter in particular. The country remains the largest supplier of nonwovens, comprising one-third of the global total, yet still requires the advanced offerings of overseas machinery suppliers, as well as supplies of raw materials, to support its export production.”

Promising conditions in the technical textiles and nonwovens market are expected to provide ample opportunities for suppliers at this year’s Cinte Techtextil China. The fair, which last year saw 366 exhibitors and 14,868 visits, will take place from 6 – 8 September 2022 at the Shanghai New International Expo Centre. Flexible exhibiting options will once again be available for overseas companies.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd, explained the positive conditions that exhibitors should expect at the fair thusly: “The pandemic has led to a surge in Chinese exports of both technical textiles and nonwovens, the latter in particular. The country remains the largest supplier of nonwovens, comprising one-third of the global total, yet still requires the advanced offerings of overseas machinery suppliers, as well as supplies of raw materials, to support its export production.”

Ms Wen continued: “Domestically, China is seeing increasing consumption of functional apparel, sportswear and personal protection items. Heightened health and sanitary regulations and new hygiene habits will also continue to drive demand, especially for nonwovens, well into the future. There has also been a post-pandemic boost in demand for filter, greenhouse covering and high-density fabrics amongst others. All of this adds up to a wealth of opportunities for overseas companies to take advantage of, as was experienced in the 2021 edition of the fair.”

Exhibitor and visitor experiences in 2021
“Our organisation promotes US cotton and we hope to use this platform to meet more companies and brands in the nonwovens industry who are interested in US cotton, and to meet up with old friends to discuss the current situation and industry trends. We also found some new potential clients this time.” Mr Eric Ni, Senior Manager, China Supply Chain Marketing, Fabrics, Garments and Nonwovens, Cotton Council International, USA

“Cinte Techtextil China is a professional exhibition that brings together cutting-edge technologies and products, allowing us to quickly learn about innovative technology trends in the industry. I’ve been particularly impressed by the biodegradable products in the Innovation Showcase. In addition, I am sourcing mask-related products and mops, and I have found some companies that I’m interested in.” Ms Claire Zhang, Senior Scientist, Personal Health, Philips Research China, Philips (China) Investment Co Ltd, China

Source:

Messe Frankfurt (HK) Ltd.

(c) Monfort
Full configuration of the Monforts and KMA Umwelttechnik line.
20.01.2022

Monforts: MonforClean brings Energy Savings for Albarrie

Albarrie – a major player in North America’s industrial nonwovens industry – is now benefiting from one of the first Monforts Montex stenter installations equipped with the full range of MonforClean heat recovery and exhaust air purification technologies.

With the new three-chamber Montex stenter at its plant in Barrie, Ontario, the Canadian company is treating specialised needlepunched nonwovens up to 4mm thick. These have applications in a wide range of filter media and performance fabrics.

The new Montex is enabling Albarrie to heat set and dry its materials to produce denser, higher quality fabrics which can also be finished and delivered to customers more rapidly.

Across timezones
It took a crew of skilled millwrights, electricians and product specialists to build the line which was delivered in 11 shipping containers to Albarrie’s production facility. The line was originally scheduled to be fully operational in the Spring of 2020, but the ongoing global Covid-19 pandemic inevitably led to several delays during the start-up and commissioning process.

Albarrie – a major player in North America’s industrial nonwovens industry – is now benefiting from one of the first Monforts Montex stenter installations equipped with the full range of MonforClean heat recovery and exhaust air purification technologies.

With the new three-chamber Montex stenter at its plant in Barrie, Ontario, the Canadian company is treating specialised needlepunched nonwovens up to 4mm thick. These have applications in a wide range of filter media and performance fabrics.

The new Montex is enabling Albarrie to heat set and dry its materials to produce denser, higher quality fabrics which can also be finished and delivered to customers more rapidly.

Across timezones
It took a crew of skilled millwrights, electricians and product specialists to build the line which was delivered in 11 shipping containers to Albarrie’s production facility. The line was originally scheduled to be fully operational in the Spring of 2020, but the ongoing global Covid-19 pandemic inevitably led to several delays during the start-up and commissioning process.

Energy savings
The Albarrie Montex line’s MonforClean capabilities include an air-to-air cross flow heat exchanger and an electrostatic precipitator providing the ability to purify the exhaust air and to recover energy to a maximum of 22,500 cubic metres of air per hour, resulting in a radical reduction in the conventional heat supply required. The MonforClean was developed in cooperation with partner KMA Umwelttechnik, based in Königswinter, Germany.

The fully automated system is powered by a Siemens SPS S7 controller and KP 700 touch panel from which the recycled energy can be continuously monitored and savings calculated.

The three-chamber Montex stenter is fitted with the latest Monforts Qualitex 800 PLC control system with WebUI, providing ease of operation, a full operating cost overview and maintenance monitoring.

Source:

Monfort

(c) nova-Institut GmbH
19.01.2022

International Conference on Cellulose Fibres 2022 presents final program

The final program will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibres and yarns. In addition, examples of non-wovens, packaging and composites will offer a look beyond the horizon of conventional application fields.

You can expect to see the “Top 6” candidates of the “Cellulose Fibre Innovation of the Year 2022” in Cologne. For the second time, the innovation award will be granted to the innovative cellulose fibre industry for developing new technologies and applications. All producers and inventors along the entire value chain from feedstock to the final product are invited to join the competition. The Cellulose Fibre Innovation of the Year 2022 Award will be voted for by conference delegates as well as online participants on the afternoon of 2 February.

The final program will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibres and yarns. In addition, examples of non-wovens, packaging and composites will offer a look beyond the horizon of conventional application fields.

You can expect to see the “Top 6” candidates of the “Cellulose Fibre Innovation of the Year 2022” in Cologne. For the second time, the innovation award will be granted to the innovative cellulose fibre industry for developing new technologies and applications. All producers and inventors along the entire value chain from feedstock to the final product are invited to join the competition. The Cellulose Fibre Innovation of the Year 2022 Award will be voted for by conference delegates as well as online participants on the afternoon of 2 February.

The internationality of this Cellulose Fibres gathering is reflected in its colourful line-up of international speakers. 42 speakers from 12 countries will demonstrate the differences in regional development paths and their transferability to other areas.

You can view the final program here.

(c) SHIMA SEIKI
18.01.2022

SHIMA SEIKI opens Online Store for APEXFiz™ Subscriptions

SHIMA SEIKI MFG., LTD. of Wakayama, Japan announces the opening of its new “SHIMA eStore” online shopping site for purchasing subscriptions to its APEXFiz™ design software. Users can access the SHIMA eStore to purchase and download entry-level APEXFiz™ Design Jr. subscription software, or sign up for a free 30-day trial.

SHIMA SEIKI’s APEXFiz™ subscription-based design software has been on sale since March 2021 as the latest addition to its proven SDS®-ONE APEX series design system lineup. Whereas previous APEX-series design systems were offered as an all-in-one proprietary hardware/software package, APEXFiz™ is available as subscription-based design software that can be installed on customers’ individual computers. Maintaining proven functions that have made the APEX series so popular with fashion designers, with APEXFiz™ those strengths are now enhanced with the added versatility to adapt to different work styles and business environments of the “new normal,” including teleworking and telecommuting.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan announces the opening of its new “SHIMA eStore” online shopping site for purchasing subscriptions to its APEXFiz™ design software. Users can access the SHIMA eStore to purchase and download entry-level APEXFiz™ Design Jr. subscription software, or sign up for a free 30-day trial.

SHIMA SEIKI’s APEXFiz™ subscription-based design software has been on sale since March 2021 as the latest addition to its proven SDS®-ONE APEX series design system lineup. Whereas previous APEX-series design systems were offered as an all-in-one proprietary hardware/software package, APEXFiz™ is available as subscription-based design software that can be installed on customers’ individual computers. Maintaining proven functions that have made the APEX series so popular with fashion designers, with APEXFiz™ those strengths are now enhanced with the added versatility to adapt to different work styles and business environments of the “new normal,” including teleworking and telecommuting.

APEXFiz™ offers the latest fashion tech for supporting the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that allows visual confirmation of garment designs without the need for producing physical prototypes, reducing time, cost and material that are otherwise wasted. APEXFiz™ thereby helps to realize sustainability while digitally transforming the fashion supply chain.

APEXFiz™ is available in 5 different software variations from APEXFiz™ Design Jr. to APEXFiz™ Design Pro that can be selected according to each customer's needs. APEXFiz™ Design Jr., sold at the SHIMA eStore, is entry-level software that specializes in the design and simulation of woven and flat knitted fabrics for supporting virtual sampling. Fabric simulations are available in different formats to be used together with 3D virtual sampling software besides APEXFiz™, allowing continued use of software already used by customers while enhancing the realism of digital prototypes created on them.

Source:

SHIMA SEIKI

18.01.2022

Indorama Ventures’ Hygiene Division achieves ISCC Plus Certification

The Hygiene Division of Indorama Ventures Public Company Limited (IVL) is pleased to announce that two of its manufacturing sites have achieved International Sustainability Carbon Certification Plus Certification.

FiberVisions’ Varde site in Denmark, a polypropylene fiber producer, and Avgol’s Uzlovaya site in Russia, a spunlaid nonwovens producer, satisfied audits related to traceability and the reasonable use of biomaterials.

Shachar Rachim, CEO, IVL Hygiene Division, part of IVL’s Fibers business segment, said: “This accreditation underscores our commitment to support our customers to achieve their carbon dioxide reduction targets through using carbon neutral fibers. The certification is assurance that our nonwoven fabrics and fibers meet all the ISCC’s demanding standards for recycled-renewable materials. Our certified facilities can trace the product’s composition through the supply chain, without needing to requalify the materials.”

The Hygiene Division of Indorama Ventures Public Company Limited (IVL) is pleased to announce that two of its manufacturing sites have achieved International Sustainability Carbon Certification Plus Certification.

FiberVisions’ Varde site in Denmark, a polypropylene fiber producer, and Avgol’s Uzlovaya site in Russia, a spunlaid nonwovens producer, satisfied audits related to traceability and the reasonable use of biomaterials.

Shachar Rachim, CEO, IVL Hygiene Division, part of IVL’s Fibers business segment, said: “This accreditation underscores our commitment to support our customers to achieve their carbon dioxide reduction targets through using carbon neutral fibers. The certification is assurance that our nonwoven fabrics and fibers meet all the ISCC’s demanding standards for recycled-renewable materials. Our certified facilities can trace the product’s composition through the supply chain, without needing to requalify the materials.”

IVL expects that the ISCC Plus certification of these two sites will be followed by similar certifications at other manufacturing plants. A broad portfolio of technologies is being developed to address how component materials interact with the environment to improve recyclability, reduce raw material consumption, and minimize the impact of fugitive wastes.

Source:

Indorama Ventures Public Company Limited

Photo: ANDRITZ
13.01.2022

ANDRITZ to supply a spunlace line to Biosphere, Ukraine

International technology group ANDRITZ has received an order from the leading Ukrainian manufacturer of household and hygiene products, Biosphere Corporation, to deliver its first complete neXline spunlace line. The ANDRITZ spunlace line will enable Biosphere to produce fabrics from 30 to 70 gsm, with an hourly output of up to 3,000 kg/hr after the second commissioning phase. Start-up is scheduled in two stages – the first one in the first quarter of 2022 and the second in early 2023, reaching full production capacity.

The high-capacity spunlace line will double the company’s current production capacity and is designed to process various types of fibers, such as polyester/viscose blends and natural fibers. It is dedicated to the production of household, medical and hygiene fabrics, such as cosmetic, disinfecting and baby wipes.

International technology group ANDRITZ has received an order from the leading Ukrainian manufacturer of household and hygiene products, Biosphere Corporation, to deliver its first complete neXline spunlace line. The ANDRITZ spunlace line will enable Biosphere to produce fabrics from 30 to 70 gsm, with an hourly output of up to 3,000 kg/hr after the second commissioning phase. Start-up is scheduled in two stages – the first one in the first quarter of 2022 and the second in early 2023, reaching full production capacity.

The high-capacity spunlace line will double the company’s current production capacity and is designed to process various types of fibers, such as polyester/viscose blends and natural fibers. It is dedicated to the production of household, medical and hygiene fabrics, such as cosmetic, disinfecting and baby wipes.

Andriy Zdesenko, founder and CEO of Biosphere Corporation, says: “Our goal is to carry on creating innovative and premium-quality products. When ANDRITZ came up with a tailor-made offer combining its cutting-edge spunlace technology with full flexibility for our future installation, we knew they were the ideal partner to support us in our business development.”

In 2019, ANDRITZ Diatec delivered a baby diaper converting line to Biosphere. With this additional order, ANDRITZ is demonstrating its strong global position as a supplier of state-of-the-art and tailor-made sustainable nonwoven solutions.

Founded in 1997, Biosphere Corporation has become the market leader in the production and distribution of household and hygiene products in the Ukraine and the CIS and a key converter player in Eastern Europe and Central Asia. The company is expanding rapidly on the international market, including Africa.

Source:

ANDRITZ AG

12.01.2022

Cellulose fibres strengthen networks: Industry meets in Cologne, Germany, and online

Strict protective measures will make the industry meeting possible at the International Conference on Cellulose Fibres in Cologne on February 2 and 3, 2022. The latest innovations will be shocased: from hygiene and textiles to non-wovens and carbon fibre alternatives to lightweight construction applications. Online participation is also possible.

Cellulose fibres show an increasingly expanding wide range of applications, while at the same time markets are driven by technological developments and political framework conditions, especially bans and restrictions on plastics and increasing sustainability requirements. The conference provides rich information on opportunities for cellulose fibres through policy assessment, a session on sustainability, recycling and alternative feedstocks as well as latest development in pulp, cellulose fibres and yarns. This includes application such as non-wovens, packaging and composites.

Strict protective measures will make the industry meeting possible at the International Conference on Cellulose Fibres in Cologne on February 2 and 3, 2022. The latest innovations will be shocased: from hygiene and textiles to non-wovens and carbon fibre alternatives to lightweight construction applications. Online participation is also possible.

Cellulose fibres show an increasingly expanding wide range of applications, while at the same time markets are driven by technological developments and political framework conditions, especially bans and restrictions on plastics and increasing sustainability requirements. The conference provides rich information on opportunities for cellulose fibres through policy assessment, a session on sustainability, recycling and alternative feedstocks as well as latest development in pulp, cellulose fibres and yarns. This includes application such as non-wovens, packaging and composites.

Live at the conference, host nova-Institute and sponsor GIG Karasek GmbH will grand the “Cellulose Fibre Innovation of the Year” award to one of six highly interesting products, ranging from cellulose made of orange and wood pulp to a novel technology for cellulose fibre production. The presentations, election of the winner by the conference audience and the award ceremony will take place on the first day of the conference.

The conference sessions reflect the current topics of industry and research. “Strategies and Market Trends” provides an overview of the rapid development of cellulose fibres and their technological progress across the fibre market. An analysis of the key cost components of these fibres to benchmark against current cost levels will highlight future opportunities and challenges for novel textile fibres. The session will conclude with an overview of the industry's recent strategies to defossilize the fibre market.

The session “New Opportunities for Cellulose Fibres in Replacing Plastics”, focusses on questions such as: “What impact does the ban on plastics in single-use products have on the industry?” and “What are the latest regulatory issues and policy opportunities for cellulose fibres?”. This part of the conference presents new opportunities for the replacement of fossil-based insulating materials with cellulose-based technologies suitable for use in a variety of applications, from aerospace to mobility and construction.
Institutefor Ecology and Innovation

“Sustainability and Circular Economy” highlights crucial issues with regard to the overall goal of keeping the environmental impact of cellulose fibres low. A core theme of the session is the responsible use of wood and forests. With this objective, the five speakers discuss the importance of circular concepts for cellulose feedstocks. Exciting insights into the important “Hot Button Report” are offered by Canopy. The “Hot Button” report enables the producers of cellulose fibres to better understand the impact their raw materials have on forests and the climate development worldwide.

The full conference programme is available at www.cellulose-fibres.eu/program.

Source:

nova-Institut GmbH

20.12.2021

Freudenberg Performance Materials increases prices for nonwoven performance materials

Freudenberg Performance Materials announces a general upward adjustment of their prices for nonwoven performance materials for flooring and filtration applications in EMEA. This revision, effective January 1, 2022, has become necessary because of sustained and unprecedented surge in cost for raw materials, packaging, freight, consumables and energy combined with disruptions in their inbound supply chain.

Prices across all categories have by far outpaced their expectations and are forecasted to remain on high levels throughout 2022. This historic price trend has placed significant pressure on Freudenberg Performance Materials, and they understand in a similar way on their customers.

At this stage their business can no longer absorb the effects of such high price levels. Freudenberg Performance Materials will therefore adjust our prices for all their Colback® and Lutradur branded nonwoven products for flooring and filtration application by double-digit increases depending on product types.

Freudenberg Performance Materials announces a general upward adjustment of their prices for nonwoven performance materials for flooring and filtration applications in EMEA. This revision, effective January 1, 2022, has become necessary because of sustained and unprecedented surge in cost for raw materials, packaging, freight, consumables and energy combined with disruptions in their inbound supply chain.

Prices across all categories have by far outpaced their expectations and are forecasted to remain on high levels throughout 2022. This historic price trend has placed significant pressure on Freudenberg Performance Materials, and they understand in a similar way on their customers.

At this stage their business can no longer absorb the effects of such high price levels. Freudenberg Performance Materials will therefore adjust our prices for all their Colback® and Lutradur branded nonwoven products for flooring and filtration application by double-digit increases depending on product types.

Freudenberg Performance Materials will continue to work on improving productivity to offset inflationary pressure to keep attractive price levels and to avoid further price adjustments. They will continue to monitor the market development and in case of sustained and unexpected downward trends they will adjust our prices accordingly.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

20.12.2021

EFI: New Innovations in Digital Textile at EFI Reggiani Open House

During an expansive, three-day Electronics For Imaging, Inc. open house this month at the company’s EFI™ Reggiani industrial textile printer facility, textile and apparel manufacturers witnessed first-hand the market-leading innovations that provide users with new opportunities. The December open house, which drew more than 70 attendees from over 23 different European, South American, and Middle Eastern countries, featured informative sessions with product experts on a diverse range of topics, covering new and trending market applications for textile manufacturers.

Attendees witnessed live demonstrations of eight advanced digital printers during the open house, including the new EFI Reggiani HYPER, EFI Reggiani TERRA Silver scanning/multi-pass printer, and EFI Reggiani BLAZE as well as the EFI Reggiani BOLT – the award-winning single-pass offering that is the one of the fastest digital textile printers.

During an expansive, three-day Electronics For Imaging, Inc. open house this month at the company’s EFI™ Reggiani industrial textile printer facility, textile and apparel manufacturers witnessed first-hand the market-leading innovations that provide users with new opportunities. The December open house, which drew more than 70 attendees from over 23 different European, South American, and Middle Eastern countries, featured informative sessions with product experts on a diverse range of topics, covering new and trending market applications for textile manufacturers.

Attendees witnessed live demonstrations of eight advanced digital printers during the open house, including the new EFI Reggiani HYPER, EFI Reggiani TERRA Silver scanning/multi-pass printer, and EFI Reggiani BLAZE as well as the EFI Reggiani BOLT – the award-winning single-pass offering that is the one of the fastest digital textile printers.

EFI Reggiani HYPER – a fast scanning digital printer
The new EFI Reggiani HYPER is a scanning printer available in 1.8-metre, 2.4-metre or 3.4-metre widths. The Reggiani HYPER model targets the industrial high-speed segment of the multi-pass textile printing sector.

With an up to eight-colour configuration, it prints at speeds up to 13 linear metres per minute in two-pass production mode. The new printer is suitable for high-quality production on knitted or woven fabrics and is designed with smart technology that enables it to be integrated into Industry 4.0 projects.

Sustainable direct-to-textile printing with the EFI Reggiani TERRA Silver
The new-version TERRA Silver printer is part of EFI’s complete TERRA line-up of pigment ink printer solutions. It allows print service providers to enter the world of industrial textile with a short, smart and green production process.
The printer also features:

  • A new recirculating ink system for superior reliability and minimum maintenance
  • Several printing modes to ensure maximum flexibility in terms of design capability
  • New, real-time image processing that eliminates time spent in image pre-calculations
  • A user friendly, intuitive interface
  • A more-efficient polymerisation process that takes place as printed textile goes through the printer’s on-board dryer.

EFI Reggiani BLAZE, an ideal entry solution for industrial textile printing
The EFI Reggiani BLAZE printer is designed to give textile companies the opportunity to enter the digital textile printing market with a compact solution. The new, 1.8-metre-wide printer offers an innovative, low-maintenance, continuous recirculation ink system equipped with a level sensor and degassing as well as a print head crash protective system for longer printhead life and superior uptime.

The upgraded EFI Reggiani BOLT – one of the fastest digital textile printers
In 2021, the EFI Reggiani BOLT received a combination of hardware and software enhancements that minimise artifacts, compensating for missing nozzles that may occur over time and enhancing uniformity to deliver smoother solid colours. The upgrade also delivers improved quality and smoother gradients, plus it enables faster printhead replacement and drastically increases file processing speed by up to 200% for large, complex files.

Source:

EFI GmbH

(c) INDA
16.12.2021

Deadline for IDEA® Achievement Awards has been extended

INDA, the Association of the Nonwoven Fabrics Industry, and Nonwovens Industry Magazine have extended the due date for nominations for the IDEA® Achievement Awards. IDEA® is the preeminent event for the nonwovens and engineered fabrics conference and exposition and will be held at the Miami Beach Convention Center in Miami Beach, Florida USA, March 28-31, 2022.

The IDEA® Achievement Awards recognize leading companies and new innovations (since IDEA® in 2019) in the global engineered fabrics industry in six categories. Companies can nominate their products, or their customers’ products in as many categories as applicable, which are:

INDA, the Association of the Nonwoven Fabrics Industry, and Nonwovens Industry Magazine have extended the due date for nominations for the IDEA® Achievement Awards. IDEA® is the preeminent event for the nonwovens and engineered fabrics conference and exposition and will be held at the Miami Beach Convention Center in Miami Beach, Florida USA, March 28-31, 2022.

The IDEA® Achievement Awards recognize leading companies and new innovations (since IDEA® in 2019) in the global engineered fabrics industry in six categories. Companies can nominate their products, or their customers’ products in as many categories as applicable, which are:

  • Sustainability Advancement (advances one or more elements of sustainability or circularity since 2019)
  • Equipment (best new equipment introduction since 2019)
  • Raw Materials (best new raw materials introduction since 2019)
  • Short-Life (best new disposable product introduction since 2019)
  • Long-Life (best new durable product introduction since 2019)
  • Nonwoven Product (best new nonwoven product introduction since 2019)

The submission deadline is now extended to February 1, 2022.  Selections will be made by members of the industry voting through Nonwovens Industry Magazine. Selection of the Entrepreneur Award will be made by Nonwovens Industry Magazine.

Source:

INDA

14.12.2021

INDA announces updated Value Proposition for Industry’s Future

INDA, the Association of the Nonwoven Fabrics Industry, announced it has updated its value proposition to grow the nonwovens industry and establish its global leadership and versality in delivering essential, environmentally-responsible materials and products.

Resulting from an extensive strategic review process guided by industry experts, the new plan positions INDA to move forward from the business challenges of COVID that impacted its ability to hold in-person events.

INDA will equip the nonwovens industry and its customers to achieve business growth by focusing resources on shaping the external environment, and fostering actionable thought leadership on crucial issues. The association will continue to strengthen its vital role of bringing together industry experts in a pre-competitive environment by organizing and leading working groups and committees to focus on areas of mutual concern.

Dave Rousse, INDA President, stated, “We enthusiastically embrace the new foundation based on five key pillars that will guide INDA activities.” These pillars are:

INDA, the Association of the Nonwoven Fabrics Industry, announced it has updated its value proposition to grow the nonwovens industry and establish its global leadership and versality in delivering essential, environmentally-responsible materials and products.

Resulting from an extensive strategic review process guided by industry experts, the new plan positions INDA to move forward from the business challenges of COVID that impacted its ability to hold in-person events.

INDA will equip the nonwovens industry and its customers to achieve business growth by focusing resources on shaping the external environment, and fostering actionable thought leadership on crucial issues. The association will continue to strengthen its vital role of bringing together industry experts in a pre-competitive environment by organizing and leading working groups and committees to focus on areas of mutual concern.

Dave Rousse, INDA President, stated, “We enthusiastically embrace the new foundation based on five key pillars that will guide INDA activities.” These pillars are:

  • Convene and connect the industry through trade shows and conferences
  • Achieve industry relevance among policy makers, end users, and other key stakeholders
  • Advocate for the Nonwovens Industry in public policy forums
  • Deliver market insights for better decision making
  • Provide training programs to sustain the industry’s innovative edge

Rousse continued, “With last month’s announcement of Tony Fragnito joining INDA as Chief Operating Officer, we are ready to implement this plan and take it into the future. I look forward to working with him to drive INDA’s continuous pursuit of excellence in providing ever greater value to our industry and our members.”

INDA has retained several outside resources to survey members and develop this plan, as well as recruit the support needed to execute the plan over the next several years.

(c) Messe Frankfurt, deepak@deepakdavda.com
13.12.2021

Techtextil India: First post-lockdown edition with overwhelming responsive from industry

After three-days of product sourcing and business networking, Techtextil India 2021 in Mumbai concluded in a strong and positive note. The trade fair emerged as a crucial meeting place for the technical textile players to rebuild their supplier links, promote industry integration and engage in lucrative knowledge exchange.

The eighth edition of Techtextil India stood out to be a ground-breaking business platform for the technical textile sector to build a new and strong foundation in the new normal. The aim of the new edition was to promote industry unification and business recovery across the value chain of technical textiles.

The event held at Bombay Exhibition Centre was inaugurated by major dignitaries, including Shri Ajit Chavan, Secretary – Textiles Committee, Ministry of Textiles, Government of India. Over the course of its three buzzing days, the show garnered an attendance of 4,087 visitors drawn by live demonstration of latest products, technologies and innovations exhibited by over 150 technical textile brands on the show floor.

After three-days of product sourcing and business networking, Techtextil India 2021 in Mumbai concluded in a strong and positive note. The trade fair emerged as a crucial meeting place for the technical textile players to rebuild their supplier links, promote industry integration and engage in lucrative knowledge exchange.

The eighth edition of Techtextil India stood out to be a ground-breaking business platform for the technical textile sector to build a new and strong foundation in the new normal. The aim of the new edition was to promote industry unification and business recovery across the value chain of technical textiles.

The event held at Bombay Exhibition Centre was inaugurated by major dignitaries, including Shri Ajit Chavan, Secretary – Textiles Committee, Ministry of Textiles, Government of India. Over the course of its three buzzing days, the show garnered an attendance of 4,087 visitors drawn by live demonstration of latest products, technologies and innovations exhibited by over 150 technical textile brands on the show floor.

The event received an overwhelming response, reflecting industry’s keen interest to explore new developments and opportunities in technical textiles. In regards to the same, Mr Abhijit Kulkarni, President – Textile Engineering Group, A.T.E. India, stated: “It was the first and best physical show also on hybrid mode filled with enthusiastic buyers and customers who visited our booth and had very fruitful discussions with us. Several leading textile manufacturers visited our stalls, including: Strata Geosystems India, SKAPS Industries, Reliance Composites, Paramount Textiles, and Welspun, to name a few.”

Alok Masterbatches Pvt Ltd, Khosla Profile Pvt Ltd, ATE Group, Lucky International, Meera Industries Limited, Park Non-Woven Pvt Ltd, Sarex Chemicals, SICAM, Suntech Geotextile Pvt Ltd and Weavetech Engineers, were among the leading Indian companies exhibiting at the show.

The significance of the three-day fair was further elevated by the German pavilion. Technical textile manufacturers from Germany, such as Autefa Solution Germany GmbH, DILO Systems GmbH, Emtec Electronic GmbH, Georg Sahm GmbH & Co, Karl Mayer Verwaltungsgesellschaft mbH, Merz Maschinenfabrik GmbH and Oerlikon Barmag Zweigniederlassung der Oerlikon Textile GmbH & Co, displayed their latest technologies on the show floor, which garnered significant attention from the Indian buyers.

The first Digital Symposium was another highlight of Techtextil India 2021. The forum delved into a series of crucial topics in technical textiles discussing PLI schemes, FDI opportunities and policies, investment opportunities in Tamil Nadu, & New Investment Opportunities, Sustainable Technical Textiles and Global sustainable approach for Textiles with Antimicrobial Performance.

Concluding on a successful note, Techtextil India 2021 emerged as a platform of new beginnings for the technical textiles sector and for businesses trying to retain their shape and seeking momentum after the tough pandemic phase.

Source:

Messe Frankfurt HK

(c) ANDRITZ
ANDRITZ Laroche textile recycling line
22.11.2021

ANDRITZ at Techtextil India 2021

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

Textil-recycling Technologies
Recently, ANDRITZ acquired Laroche SAS, a leading supplier of fiber processing technologies such as opening, blending, dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. The product portfolio further complements and increases the ANDRITZ Nonwoven product range. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses.

Needlepunch Technologies
Driven by the dynamic market for durable nonwovens, ANDRITZ has developed an elliptical pre-cylinder tacker – the PA3000. With this modern machine, ANDRITZ is responding to customer demands for higher capacities and lighter products. The PA3000 is an optimized cylinder pre-needleloom, which offers greater speeds and widths and has been specially developed for lighter webs. There is no friction between the web and the rolls, and there are no issues with the visual appearance.

ANDRITZ is also focusing on its latest needling technology for producing veloured felts, mainly for applications in the automotive industry.

In addition, ANDRITZ will be presenting the next generation of its batt-forming technology, the ProWin system. ProWin is a further development of ProDynTM and ProWidTM, which have achieved a high level of acceptance on the market with around 200 systems installed. This technology improves the current weight-profiling options and increases the actual production capacity.

Production of Bio-Wipes
For many years now, ANDRITZ has offered different nonwoven processes, such as spunlace and Wetlace, with one goal in mind: reduction and elimination of plastic raw materials while maintaining the high quality of the desired product properties. The latest development in this field is the ANDRITZ neXline wetlace CP line. This is a fully engineered production line, combining the benefits of wetlaid and drylaid technologies to produce a new generation of biodegradable wipes. This process achieves high performance entirely with plastic-free raw materials. The added benefit of using a blend of fibers, like wood pulp, short-cut cellulosic fibers, viscose, cotton, hemp, bamboo, or linen, without chemical additives, results in a 100% sustainable fabric.

(c) Kai-Chieh Kuo
17.11.2021

ITA PhD student Kai-Chieh Kuo was awarded Best Master’s Thesis Award of Walter Reiners-Stiftung

Kai-Chieh Kuo, PhD student at the Institut für Textiltechnik (ITA) of RWTH Aachen University, was awarded the German Textile Mechanical Engineering 2021 Best Master's Thesis Award for his master's thesis entitled "Modification of the tube weaving process of fine yarns for the production of woven ultra-low profile stent grafts". The prize is endowed with 3,500€. Peter D. Dornier, Chairman of the Board of the Walter Reiners-Stiftung (Foundation), virtually presented the award on the occasion of the ADD International Textile Conference on 9 November 2021.

Kai-Chieh Kuo, PhD student at the Institut für Textiltechnik (ITA) of RWTH Aachen University, was awarded the German Textile Mechanical Engineering 2021 Best Master's Thesis Award for his master's thesis entitled "Modification of the tube weaving process of fine yarns for the production of woven ultra-low profile stent grafts". The prize is endowed with 3,500€. Peter D. Dornier, Chairman of the Board of the Walter Reiners-Stiftung (Foundation), virtually presented the award on the occasion of the ADD International Textile Conference on 9 November 2021.

Minimally invasive endovascular aortic repair (EVAR) with textile stent-graft systems is nowadays a clinically established therapy procedure for the treatment of abdominal aortic aneurysms (AAA) – pathological bulges of the aorta. Due to the thick profile of the folded stent graft systems, there is currently a high risk of injuring narrowed or highly angulated access vessels from the inside during implantation. Stent graft systems with smaller profiles could provide an improvement, which could overcome complicated access routes through a lower bending stiffness. One possible approach for reducing the system profiles is the use of thin-walled tubular woven fabrics made of ultrafine multifilament yarns (≤20 dtex) as graft material.

Up to now, it has not been possible to process the fine yarns with the required high thread density (>200 threads/cm) and the available weaving technology in order to guarantee sufficient tightness against blood.

In his master's thesis, Kai-Chieh Kuo made high-density tubular weaving of ultra-fine filament yarns possible for the first time by means of suitable modifications to a shuttle loom as well as adaptations in the weaving preparation. In particular, he developed a new innovative reed technology that reduces warp thread friction during the shedding process and thus improves the process stability of the dense tube weaving process of fine yarns.

With the help of the process modification, it was then possible to produce high-density, thin-walled tubular woven fabrics, which were positively evaluated with regard to their suitability for a stent graft. Above all the potential of these tubular fabrics lies in their extremely thin-walled fabric profile, which seals well against blood. By using these new types of tubular fabrics as graft material for stent grafts, the system profile of the folded stent graft system can be reduced without having to compromise the blood tightness of the implant. The technology developed by Mr Kuo is not only applicable to stent graft systems, but also offers great possibilities for use in all other endovascular implants such as trans catheter heart valves, covered stents and small-lumen vascular prostheses.

Mahlo: Two heads of subsidiaries celebrate anniversaries (c) Mahlo
Michel Bruni, CEO of Mahlo Italia
16.11.2021

Mahlo: Two heads of subsidiaries celebrate anniversaries

At the subsidiaries of the German Mahlo GmbH + Co KG, two branch managers are celebrating anniversaries this year. Alan Lavore, CEO of Mahlo America Inc., has been with the machine builder for 25 years. Michel Bruni, CEO of Mahlo Italia, has been part of the Mahlo family for 40 years.

Bruni began his career at Mahlo in 1981 as a service technician in the French branch Mahlo Ouest. Just one year later, he moved to Mahlo Italia, where he was appointed branch manager in 1996. He still holds this position today. Bruni is also sales manager for the Benelux countries, the Maghreb countries and Madagascar. The Mahlo Italia CEO's recipe for success includes expertise paired with experience and passion. To remain loyal to a company for so many years also testifies to a special relationship. "Then as now, I work with a dynamic and committed team. We also have a very good relationship with the employees of the parent company in Germany," says Bruni.

At the subsidiaries of the German Mahlo GmbH + Co KG, two branch managers are celebrating anniversaries this year. Alan Lavore, CEO of Mahlo America Inc., has been with the machine builder for 25 years. Michel Bruni, CEO of Mahlo Italia, has been part of the Mahlo family for 40 years.

Bruni began his career at Mahlo in 1981 as a service technician in the French branch Mahlo Ouest. Just one year later, he moved to Mahlo Italia, where he was appointed branch manager in 1996. He still holds this position today. Bruni is also sales manager for the Benelux countries, the Maghreb countries and Madagascar. The Mahlo Italia CEO's recipe for success includes expertise paired with experience and passion. To remain loyal to a company for so many years also testifies to a special relationship. "Then as now, I work with a dynamic and committed team. We also have a very good relationship with the employees of the parent company in Germany," says Bruni.

The culture and integrity with which business is conducted in the family-owned company were among the reasons why Mahlo America Inc. CEO Alan Lavore has also been with Mahlo for 25 years. "I just love working with all the great people at Mahlo." Lavore joined Mahlo in 1996 as a territory sales manager and took over as CEO in 2005. During this time, he drove the company's expansion from a textile specialist to a supplier for various production sectors such as film, paper, coating and converting or nonwovens.

More information:
Mahlo nonwovens Automation
Source:

Mahlo GmbH + Co. KG

(c) Avgol
15.11.2021

Avgol at Hygienix™ 2021 with biotransformation technology in nonwovens

Avgol, an Indorama Ventures company and manufacturer of high-performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s Hygienix™ event.

Nick Carter, Vice President, Nonwovens Marketing at Avgol, will be a guest speaker at the event, giving a presentation alongside Dr. DeeAnn Nelson, R&D and Innovation Manager with Avgol in North America, on ‘Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles’. “Today, the word “sustainability” does not have a unified meaning in the industries we serve,” said Nick. “Perform a regional analysis on any given customer or consumer, delve into a legislative body or advocacy group’s positioning and you will find each are likely to use the word ‘sustainable’ with varying interpretations, implementations, and implications.

The Avgol presentation, part of the Product & Process Innovation in AHPs series, will take place at 2pm on Tuesday, November 16.

Avgol, an Indorama Ventures company and manufacturer of high-performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s Hygienix™ event.

Nick Carter, Vice President, Nonwovens Marketing at Avgol, will be a guest speaker at the event, giving a presentation alongside Dr. DeeAnn Nelson, R&D and Innovation Manager with Avgol in North America, on ‘Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles’. “Today, the word “sustainability” does not have a unified meaning in the industries we serve,” said Nick. “Perform a regional analysis on any given customer or consumer, delve into a legislative body or advocacy group’s positioning and you will find each are likely to use the word ‘sustainable’ with varying interpretations, implementations, and implications.

The Avgol presentation, part of the Product & Process Innovation in AHPs series, will take place at 2pm on Tuesday, November 16.

From their base at the tabletop event, Nick and the Avgol team will be discussing the global challenge of eliminating incineration, chemical treatment, landfill, dumping and, in particular, fugitive material pollution from non-woven products.

“Following our recent success at Index 20, we will be sharing insight to our research and development strategy with Hygienix attendees, addressing the degradation performance of our products and the path forward for the industry in terms of the use of new bio-colorants, biosurfactants and new technologies. Of course, we will also be demonstrating our latest Forward Innovative Thinking (FITTM) range of hygiene materials too, including natureFITTM”, says Nick Carter.

natureFIT™ is the newest innovation in the Avgol™ technology platform, designed to imbue nonwoven fabrics with additional qualities and benefits that anticipate the shifting demands of the consumer-led retail space. The suite of fabric solutions is focused on replacing elements of spun melt fabric design, where possible, with natural alternatives. The advanced technology affords product designers a significant reduction in polymer consumption to reduce environmental impact while simultaneously enhancing softness and conformability.

Hygienix™ runs from 15 – 18 November 2021 at the Westin Kierland Resort in Scottsdale, Arizona, USA.

More information:
Avgol Hygienix™ 2021 nonwovens
Source:

Avgol / PHD Marketing Ltd