From the Sector

Loop Linen has earned the Hygienically Clean Food Service designation, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing. Loop Linen is a fourth-generation family-owned linen and uniform service company located in New Orleans suburb of Westwego.

The certification confirms the laundry’s dedication to compliance and processing linens and garments using BMPs as described in its quality assurance documentation, the focal point for Hygienically Clean inspectors’ evaluation of critical control points (CCPs) that minimize risk. The independent, third-party inspection must confirm essential evidence that:
•             Employees are properly trained and protected
•             Managers understand legal requirements
•             OSHA-compliant
•             Physical plant operates effectively

In addition, Loop Linen’s facility passed three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean garments and linens and diminished presence of harmful bacteria. To maintain their certification, laundry plants must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained.

This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for full- and limited-service restaurants and other food service operations.

Hazard Analysis and Critical Control Points (HACCP) practices are examined in the Hygienically Clean Food Safety inspection process, evaluating the plant’s techniques for:
•             Conducting hazard analysis
•             Determining CCPs, monitoring their control, correcting them if not under control
•             Validating and verifying HACCP system effectiveness
•             Documenting and record-keeping to show ongoing conformance

Inspections also evaluate practices relevant to handling and processing textile products used in food manufacturing/processing establishments for adherence to U.S. Food and Drug Administration (FDA) and Centers for Disease Control and Prevention (CDC) directives. Introduced in January 2016, Hygienically Clean Food Service brought to linen and uniform service laundering in North America the international cleanliness standards used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.

“Congratulations to Loop Linen on their certification,” said Joseph Ricci, TRSA president and CEO. “This achievement proves their dedication to building their customers’ confidence that their laundry takes every step possible to prevent human illness.”

Geleen, NL - Royal DSM, a global science-based company active in health, nutrition and materials, today announces that DSM-Niaga and ECOR are to start a research collaboration. The collaboration will focus on developing fully recyclable and healthier alternatives for particleboard, MDF and other panel materials which can be used in industries such as building & construction, furniture, interior decoration and displays. ECOR offers technology for circular materials and has an R&D facility in Venlo, the Netherlands.

Looking at the piles of waste generated by the interior and construction industries, design for recycling is inevitable. Both ECOR and DSM-Niaga have been redesigning products to be fully recyclable back into the same product. The irreversible combination of materials and ingredients used in most products made with MDF and particleboard is the biggest challenge for technically and economically feasible recycling. Both ECOR and DSM-Niaga want to outsmart complexity for healthier and recyclable products.

Eric Logtens, CEO ECOR-NOBLE Environmental Benelux commented: “The concept that traditional materials like tabletops are up for incineration or disposal after their life cycle will be eliminated. Combining ECOR and Niaga® technologies, the core materials of products can be made from recycled content, and can be fully recycled after use.”

Chris Reutelingsperger, Chief Technology Officer DSM-Niaga commented: “By combining ECOR and Niaga, waste becomes a treasure. I can’t stop thinking of all the possibilities, and I hope that designers will approach us for ideas to make beautiful products and challenge us to broaden the possibilities of these technologies.”

In recent months ECOR and DSM-Niaga explored a collaboration by combining each other’s technologies. The technology of ECOR can make materials from natural fibers, with water, pressure and heat alone. DSM-Niaga manufactures products by using a reversible adhesive. This adhesive enables easy decoupling of different material layers, for full recovery and high value recycling. Both technologies were combined and tested in diverse product applications, like furniture and displays. The preliminary results led to further investigating of applications and will lead to new fully recyclable products.

Both technologies combined offer a fully recyclable alternative to all products made from MDF and particleboard, without compromising on material safety, quality, and recyclability. The joint objective of both companies is to offer manufacturing processes to local companies, solving local waste problems and boosting local economies on a global scale.

The AZL will continue its collaboration on composites in buildings and infrastructure after completing an initial market and technology study which identified new potentials for composite technologies in buildings and infrastructure markets. The aim of the new AZL Workgroup which will meet for the first time on January 25th, 2018 is to jointly develop new applications and to support the business development for composites in these two growing markets. The meeting is open to interested companies from the composite industry as well as the building and infrastructure markets.

The aim of the initial workgroup meeting will be to turn insights from the study into a long-term workgroup collaboration and to define topics and initiatives for the joint cooperation in the field of process and manufacturing technologies, fire safety regulations, materials as well as standards and norms. Industrial keynote presentations will introduce these action fields and will provide an insight into building and infrastructure applications for composites. The meeting will furthermore provide a platform to network with companies along the entire composite value chain.

Dr. Amer Affan, CEO and founder of AFFAN Innovative Structures based in Dubai is in charge of various composite projects for buildings such as the Museum of the Future in Dubai: “We have been utilizing structural composites in construction since 2010. Composites is a truly high-tech material compared with the traditional building materials (steel, concrete, timber and aluminum) but it is still to be recognized as such in the conservative and price-sensitive building industry. AZL, particularly its location at the RWTH Aachen University and its partner companies, offers a good platform to progress the use of composites in construction.”

AZL together with more than 25 companies just completed the Joint Market and Technology Study on “New Potentials for Composite Technologies in Buildings and Infrastructure” establishing a broad knowledge on business opportunities for composite technologies in these two growing markets. In a structured approach, the study determined the key segments as well as the technologies/applications with the highest market and technological potential. Analyses of 20 market segments, investigation of 438 applications, technology analyses of 25 highlight components and 11 detailed business cases were elaborated throughout the study. Additional to requirement analyses for materials and production technologies, new concepts for efficient profitable production technologies and cost engineering analysis were developed. With the workgroup, the AZL will take this initiative a step further with the aim to build a long-term cooperation platform for composites in buildings and infrastructure markets.

Justin Jin, CEO of the Korean company AXIA Materials participated in the study and is part of the AZL Partner Network: “As producer of large thermoplastic composite sheets and composite SIP (Structural Insulated Panel), we are eager to drive composites in B&I applications with the best efficient way. The AZL study on Buildings and Infrastructure provided us a great networking with key players in this business field and opportunities to strengthen our products with the key elements from partners. The study also gave us a proper market understanding including market size/volume in numbers to prove the value of this technology to building industry. We are looking forward to following up on these first insights and to realize applications with the AZL and its partners.”

Besides the networking options, the meeting will offer the opportunity to get an insight into the activities of the AZL Network consisting of nine research institutes at the RWTH Aachen Campus and more than 80 companies from 21 countries. During an optional guided tour, participants will visit selected institutes at the RWTH Aachen Campus. The meeting is open to all interested companies and free of charge.

More Information on Meeting and the Study
Information on AZL activities in the field of buildings and infrastructure:
www.azl-lightweight-production.com/composites-buildings-infrastructure
Details and registration to first Workgroup Meeting on January 25th, 2018:
http://www.azl-lightweight-production.com/termine/1st-workgroup-meeting-buildings-infrastructure

Bobingen - On the 4th October 2017 a new brand was introduced at Trevira: Trevira SINFINECO®. This label may be carried by all textiles that contain sustainable Trevira products. Sustainable, innovative, high-value and responsible – these are the values the new brand stands for.

As an industrial enterprise, Trevira is conscious of its special responsibility for an intact environment and has long advocated the recycling of valuable raw materials and waste products. Trevira CEO Klaus Holz: “We at Trevira wish to preserve the environment and at the same time work to create value. These are the criteria of our sustainability concept.“

Creation of the new brand is therefore only a logical step, one that enables customers to label their sustainable Trevira products as such. Trevira is known for the high quality of its products. In every way recycled products are as good as the original materials in terms of quality and performance.

Two vital elements in Pre-Consumer Recycling and an important concept in Post-Consumer Recycling form part of the sustainability strategy of Trevira to conserve resources and maintain value. :

In the area of Pre-Consumer Recycling, on the one hand, residual materials resulting from the manufacture of polyester fibres and filaments in Bobingen and Guben, dependent on the manufacturing step, are processed in the agglomeration plant and restored to become serviceable primary material. The recyclates are then fed back to our fibre and filament spinning mills, to be made into new top-quality products.

On the other hand, in fibre production there occurs in the manufacture of tow a small proportion of tow that cannot be used for converting and has to be cut out. Instead of selling this material as waste, it is cut up, pressed into balls and then carded / combed by a partner, resulting in a 1A quality product. The GRS certification (Global Recycled Standard) is requested for this. As with converter tow from new material, the recycled tow is mostly incorporated into polyester wool blends (55 % PET / 45 % wool), which are used primarily in corporate wear and uniforms.

In the area of Post-Consumer Recycling, Trevira offers filament yarns consisting of 100 % recycled PET bottles. Our parent company Indorama manufactures very high quality recycled chips from PET bottles. Since only transparent PET bottles are used in Thailand, the flakes and chips are of a particularly good and very uniform quality. The recycled chips, fibres and filaments from Indorama bear the GRS certificates (Global Recycled Standard) and RCS-NL (Recycled Claim Standard). Trevira processes the regranulate made by Indorama from bottle flakes into filament yarns consisting 100 % of recycled material. The filament yarns are available in titres 167 and 76 dtex normal polyester. Alongside technical applications, they are used in the automotive and apparel sectors. In addition, many promising developments with the recycled material are on their way.

• INVISTA to showcase ‘Innovative Attitude’ at Intertextile Shanghai Apparel Fabrics
• Innovative INVISTA products, findings from a new textile industry IP protection survey, in-depth consumer insights and fashion trends will be revealed

INVISTA, one of the world’s largest integrated producers of polymers and fibres, will showcase the innovative attitudes enabling it to maintain a leading position in the textile industry at the upcoming Rendez-Vous 2017 at October’s Intertextile Shanghai Apparel Fabrics – the world’s most influential apparel event. INVISTA Rendez-Vous will showcase innovative INVISTA products, offer consumer insights and reveal the results of a textile industry IP protection survey.

INVISTA Rendez-Vous 2017 will be held at Intertextile Shanghai Apparel Fabrics 11 – 13 October at the National Exhibition and Convention Center in Shanghai, with INVISTA occupying two booths in hall 5.2 E49 and hall 7.2 E55. 

As a global authoritative trade show in textile industry, Intertextile Shanghai Apparel Fabrics has been a platform for INVISTA to communicate with players across the value chain for 23 years. This year’s event will be no exception. The rich and vivid content delivered at the show will focus on INVISTA’s Innovative Attitude to consumers, partners as well as the whole industry.

To build a healthy and sustainable marketing environment, INVISTA cooperated with a number of media organisations to conduct a survey on IP protection in the textile industry. The results will be revealed during a seminar entitled ‘Innovation and IP: An Avenue for Sustainable Textile Industry Development’, which will be held on 11 October, 2:45 – 3:45pm in the Textile Dialogue area in hall 5.2. Representatives from textile industry associations, legal firms and INVISTA will share the findings and offer insights during what will undoubtedly be one of the highlights of INVISTA Rendez-Vous 2017.

The main pavilion of the show will be located in the International Hall (hall 5.2), where three of INVISTA’s most innovative products will be on show. Visitors will experience the latest possibilities offered by LYCRA® MOVESTM BRA, LYCRA® MOVESTM LEGGINGS and LYCRA® MOVESTM HOSIERY.

LYCRA® MOVESTM BRA

According to consumer research conducted in 2016, bra products in China’s domestic market don’t match consumer demands in a host of critical areas, including support, comfort and aesthetic design. To address these concerns, streamline the industry and consolidate its leadership, INVISTA is launching LYCRA® lastingFIT technology for bra wings. In addition, INVISTA’s cutting-edge technology can contribute to meeting specific quality standards in bra wing fabrics, enabling Chinese consumers to experience higher levels of comfort and the appropriate support they expect from a bra in different occasions.

LYCRA® MOVESTM LEGGINGS

INVISTA’s longstanding commitment to legging fabrics will also be on display at Rendez-Vous. INVISTA’s LYCRA® MOVESTM LEGGINGS has already spawned LYCRA® SPORT Power-Comfort-Energy (PCE™) index-certified fabrics, which are now commercially available.

The revolutionary fabrics present excellent recovery performance for LYCRA® SPORT legging products. They also offer the industry an opportunity to develop a number of targeted segment markets – from compression and medium compress to light compression leggings.

LYCRA® MOVESTM HOSIERY

LYCRA® MOVESTM HOSIERY is all about fabric technology innovation. Due to excellent properties, such as anti-laddering, fit and durability as well as comfortable waistbands, INVISTA’s LYCRA® FUSIONTM technology has already been widely adopted in China’s hosiery sector.

A Packed Pavilion

At the LYCRA® MOVESTM Denim pavilion in the Beyond Denim hall (7.2), visitors won’t just see the innovative denim products offered by INVISTA; they will also learn about three themes highlighted through consumer insights – fit, shape and embracing heat & cold. There will also be a special session outlining the latest woven bottom trends, hosted by INVISTA experts.

Introduced commercially in 2010, LYCRA® dualFX® dual core yarn technology provides denim with super stretch and super recovery that fits all day and every day. It effectively prevents seam slippage and uneven fabric surfaces, keeping denim looking good, feeling comfortable and fitting, which in turn creates new denim fabric applications and fashion trends in the China market.

Last But Not Least

An interactive program, that includes visitors uploading pictures they take at the INVISTA booth to the official INVISTA WeChat account, will give every visitor a chance to win a special INVISTA gift. Visit INVISTA at hall 5.2 E49 and hall 7.2 E55 from 11 – 13 October at Intertextile Shanghai Apparel Fabrics 2017.

At Heimtextil, which is to be held in Frankfurt from 9 to 12 January 2018, Trevira GmbH will be represented together with some important Trevira CS clients in Hall 4.2 at a 1,305 m2 booth.
The core of this joint booth will be a Trevira exhibition. Participating clients will present their latest Trevira CS collections for home textiles and commercially used textiles at individual stands around this core exhibit. The joint stand is located in close proximity to the new exhibition “Interior. Architecture. Hospitality. EXPO” of Messe Frankfurt.
“We are delighted to be able to make a significant contribution to the new thematic focus of Hall 4.2 with our trade fair concept for next year. It enables us to offer a platform to our clients allowing them to reach important decision-makers. In

addition, visitors to the trade fair will appreciate being able to find such a large number of Trevira CS novelties and collections in a one-stop-shop,” says Anke Vollenbröker, Head of Marketing at Trevira GmbH.
Trevira CEO Klaus Holz is pleased that the idea of a joint stand has been so well received by their clients. “The high level of demand shows that our concept of a comprehensive partnership with our clients pays off. Our long-standing clients appreciate that we not only offer them high quality and sustainably produced fibres and yarns, but that we also support them with our technical expertise and in marketing their Trevira fabrics.”

The following clients will be represented with a large selection of their beautiful and modern Trevira CS fabrics at the joint booth in January: Baumann Dekor Ges.m.b.H., Engelbert E. Stieger AG, FIDIVI Tessitura Vergnano S.p.A., Jenny Fabrics AG, Johan van den Acker Textielfabriek B.V., Mattes & Ammann GmbH & Co. KG, Pugi R.G. S.R.L., Spandauer Velours GmbH & Co. KG, SR Webatex GmbH / Getzner Textil AG, Swisstulle AG, Tessitura Mario Ghioldi & C. srl, Torcitura Fibre Sintetiche S.p.A., Torcitura Lei Tsu S.r.l., Vlnap a.s. / Wagenfelder Spinning Group, Wintex S.r.l., Mersem Teksil San. Ve Tic. Ltd. Sti, Teksko Kadife Kumas San. Ve Tic. A.S.

Based in Porto, Portugal, Rodrigo Siza will focus on nurturing new regional collaborations to benefit the needs of Lectra’s customers, and faciliate their success in the Industry 4.0 era. Rodrigo will rely on Lectra’s highly experienced teams located in the region.
“Rodrigo has very effectively established long-term partnerships with our fashion and apparel, automotive and furniture customers in Portugal. He has helped our customers to emerge stronger from the world crisis which heavily impacted them. After 10 successful years as head of Lectra Portgual, Rodrigo is now also in charge of meeting the expectations of our Spanish customers,” stated Daniel Harari, Lectra Chairman and CEO.

Players in the region are witnessing a strong dynamic, notably fashion brands in Spain and fashion and automotive industrialists with heightened added-value in Portugal. With the recent announcement of a new strategy to focus on Industry 4.0, Lectra is in a strong position to support these businesses in the digitalization of their processes.
For industries faced with more demanding consumers and ever-shorter product development and manufacturing cycles, integrating all steps along the extended supply chain, from design to cutting, is now a top priority. This is particularly apparent in Spain and Portugal, two countries positioned, in their own way, at the heart of Europe’s fashion and automotive industries.
Rodrigo started his career at Tradetex, a trading company of textiles for clothing, as a textile designer. From 1991 to 1999, he was an associate of V-Sistemas Informatica, specialized in the development and distribution of technical solutions for the textile industry. In 2000, he joined Lectra Portugal as a design and merchandising manager, and then evolved into the position of international consultant in 2004. He left Lectra in 2005 to take the position of Sales Director of RPB Têxteis e Vestuario, a company that makes clothes, before returning to Lectra in 2007 to take over the management of the Portuguese subsidiary. Rodrigo has a masters in marketing from Minho University and a degree in design and communication from Porto University, both located in Portugal.

Crescent Laundry, Davenport, Iowa, has again achieved Hygienically Clean (HC) Healthcare certification, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.
Crescent was first certified in 2014. Recertification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:
• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively

Certified facilities pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and zero presence of yeast, mold and harmful bacteria. To maintain their certification, laundry plants must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities. Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations through testing and inspections that scrutinize quality control procedures in textile services operations related to the handling of textiles containing blood and other potentially infectious materials.

The certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that: • Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively
The Memphis laundry was first certified in 2014. AmeriPride has other U.S. Hygienically Clean Healthcare certified facilities in Little Rock, Ark.; Phoenix; Watkinsville, Ga.; Topeka, Kan.; Bemidji, Minneapolis and Twin Falls, Minn.; Springfield, Mo.; Omaha, Neb.; and Lubbock, Texas. The company’s Canadian Linen and Uniform Service facility in Lethbridge, Alberta, is also Hygienically Clean Healthcare certified.
Certified facilities pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and zero presence of yeast, mold and harmful bacteria. To maintain their certification, laundry plants must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained.
This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.

Compared to the past years we are a little late in advertising the upcoming 13th China International Recycled Polyester Conference & Exhibition in Shanghai at September 05 – 06, but as during the past twelve years we are expecting again an succesful international event with a large number of Mainland Chinese and Oversees delegates, speakers, exhibitiors and sponsors. The Conferece venue is the Holiday Inn Shanghai Hongqiao this year, which is located near the Hongqiao Airport and so about 30 min by car from the city and 15 min walking distance to the subway No. 6. With a production of about 8 Mio t/a the Chinese polyester recyclers are producing all kind of textile intermediates like staple fiber, POY, DTY, FDY, BCF, technical yarn and spunbond products based on mainly PET bottle flakes. Meanwhile also bottle-to-bottle and bottle-to-film or strapping technology is on the way. Therefore conference and exhibition are an ideal meeting place for those who are involved in the whole production chain including engineering and equipment manufacturer. Very interesting will be discussion and latest information about the impact of new governmental action to improve environmental standards. This new development might be of importance especially for those who are involved in raw material sourcing.