From the Sector

Reset
1565 results
GREENBOATS, Sicomin and Bcomp Selected as JEC Innovation Awards 2021 Finalists (c) JEC Group
17.05.2021

GREENBOATS, Sicomin and Bcomp Selected as JEC Innovation Awards 2021 Finalists

GREENBOATS, Sicomin and Bcomp are nominated as finalists for the JEC Innovation Awards 2021. The three project partners have been selected as finalists in the awards’ Renewable Energy category for their innovative Green Nacelle – the first offshore nacelle manufactured with natural fibre composites (NFC).

The Green Nacelle was designed by NFC innovators GREENBOATS, who were also responsible for the structural engineering, manufacturing and assembly of the nacelle.  By incorporating Bcomp’s ampliTex™ flax reinforcements, FSC certified balsa wood cores and bio-based resins, the Green Nacelle’s NFC construction saves approximately 60% CO2 equivalent and reduces the energy consumption by over 50% compared to a nacelle made with existing GFRP technology.

In addition to the lower CO2 footprint, the natural fibre composite structure also introduces viable options for the end of the nacelles’ life unlike traditional GFRP structures - an issue of increasing concern for the wind energy sector that presents a great opportunity for natural fibre composites to bring a sustainable change to this market.

GREENBOATS, Sicomin and Bcomp are nominated as finalists for the JEC Innovation Awards 2021. The three project partners have been selected as finalists in the awards’ Renewable Energy category for their innovative Green Nacelle – the first offshore nacelle manufactured with natural fibre composites (NFC).

The Green Nacelle was designed by NFC innovators GREENBOATS, who were also responsible for the structural engineering, manufacturing and assembly of the nacelle.  By incorporating Bcomp’s ampliTex™ flax reinforcements, FSC certified balsa wood cores and bio-based resins, the Green Nacelle’s NFC construction saves approximately 60% CO2 equivalent and reduces the energy consumption by over 50% compared to a nacelle made with existing GFRP technology.

In addition to the lower CO2 footprint, the natural fibre composite structure also introduces viable options for the end of the nacelles’ life unlike traditional GFRP structures - an issue of increasing concern for the wind energy sector that presents a great opportunity for natural fibre composites to bring a sustainable change to this market.

Sicomin, the formulator and supplier of the leading range of GreenPoxy bio-based epoxy resin systems, supplied its DNV GL approved InfuGreen 810 resin system that was used to infuse the Green Nacelle’s main structural sandwich panels, as well as providing intumescent FR gelcoats, bio-based laminating resins and UV resistant clear coatings for the groundbreaking new nacelle.  Materials, as well as on-site technical support, were delivered by Sicomin’s German distributor TIME OUT Composites.

The winners of the awards will be announced during JEC Connect which will be held on the 1st and 2nd June 2021.

Source:

100% Marketing

17.05.2021

Hochschule Albstadt/Sigmaringen: neuer Nachhaltigkeits-Studiengang

Globale Umweltverschmutzung, soziale Ungerechtigkeiten und tiefgreifende Auswirkungen auf Mensch und Natur stellen unsere Gesellschaft und die Unternehmen heute vor große Herausforderungen. Darauf reagiert die Fakultät Engineering an der Hochschule Albstadt-Sigmaringen mit einem neuen Studienangebot, das ihre Stärken im Bereich der Produkt- und Prozessentwicklung mit dem Thema Nachhaltigkeit vereint und den angehenden Ingenieuren einen an den globalen Herausforderungen orientierten Blickwinkel auf die Produktentwicklung ermöglicht. Der neue Studiengang „Sustainable Engineering – Nachhaltige Produkte und Prozesse“ mit breit angelegten Querschnittskompetenzen in den Bereichen Nachhaltigkeit und Engineering startet im kommenden Wintersemester.

Globale Umweltverschmutzung, soziale Ungerechtigkeiten und tiefgreifende Auswirkungen auf Mensch und Natur stellen unsere Gesellschaft und die Unternehmen heute vor große Herausforderungen. Darauf reagiert die Fakultät Engineering an der Hochschule Albstadt-Sigmaringen mit einem neuen Studienangebot, das ihre Stärken im Bereich der Produkt- und Prozessentwicklung mit dem Thema Nachhaltigkeit vereint und den angehenden Ingenieuren einen an den globalen Herausforderungen orientierten Blickwinkel auf die Produktentwicklung ermöglicht. Der neue Studiengang „Sustainable Engineering – Nachhaltige Produkte und Prozesse“ mit breit angelegten Querschnittskompetenzen in den Bereichen Nachhaltigkeit und Engineering startet im kommenden Wintersemester.

"Die Welt besser machen"
Wie kann ein Produkt langlebig und reparaturfreundlich gestaltet werden? Können Themen wie Recycling und Entsorgung eines Produkts bereits in der Entwicklung bedacht werden? Welche Prozesse der Lieferkette stellen die größte Umweltbelastung dar, und wie können diese optimiert werden? Wie können Werkstoffe umweltfreundlich abgebaut, produziert und transportiert werden? Welche rechtlichen Vorgaben in Bezug auf den Umweltschutz existieren bereits, und von welchen Instanzen werden sie gemacht? Wie kann man Prozessketten fair gestalten? Wer trägt die soziale Verantwortung? Welchen Nutzen, aber auch welche Risiken bringt eine neue Technologie mit sich? Diesen und ähnlichen Fragen widmet sich „Sustainable Engineering“ und gibt den Studierenden das Rüstzeug mit, um die Welt im wahrsten Sinne des Wortes besser zu machen.

Studierende können aus drei Vertiefungsrichtungen wählen
In einem gemeinsamen Grundstudium werden den Studierenden zunächst das allgemeine ingenieurwissenschaftliche Fachwissen sowie Grundlagen der Nachhaltigkeit vermittelt. Um nach dem Studium sofort auch fit für den internationalen Arbeitsmarkt zu sein und auch ausländische Studierende anzusprechen, wird der Nachhaltigkeitsblock auf Englisch gelehrt. Ab dem dritten Semester entscheiden sich die Studierenden dann für eine von drei Vertiefungsrichtungen: Textil- und Bekleidungstechnologie, Maschinenbau oder Werkstoff- und Prozesstechnik.

Source:

Hochschule Albstadt-Sigmaringen

Wissenschaftskommunikation Energiewende: Für Energieforschung begeistern und Innovationen für das Energiesystem von morgen zeigen. © Fraunhofer UMSICHT
Wissenschaftskommunikation Energiewende: Für Energieforschung begeistern und Innovationen für das Energiesystem von morgen zeigen.
17.05.2021

Fraunhofer UMSICHT Ausstellungsprojekt

  • Energiewende – gemeinsam für eine klimaneutrale Zukunft
  • Wissenschaftskommunikation Energiewende: Für Energieforschung begeistern und Innovationen für das Energiesystem von morgen zeigen.

Wie können wir die Energiewende gemeinsam umsetzen? Dieser Frage widmet sich ab 2022 eine Ausstellung, die das gesamte Bundesgebiet bereist und durch zahlreiche Veranstaltungen und partizipative Angebote begleitet wird. In dem gemeinsamen Projekt präsentieren Forschungseinrichtungen, Hochschulen, Ausstellungshäuser sowie Akteure der Wissenschaftskommunikation Lösungen für eine sichere, wirtschaftliche und klimaneutrale Energieversorgung und nehmen Ideen und Meinungen der Bürgerinnen und Bürger dazu auf. Parallel werden die Wahrnehmung des Themas Energiewende in der Öffentlichkeit und die Wirkung des Projekts selbst erforscht.

Ausstellung ab April 2022

  • Energiewende – gemeinsam für eine klimaneutrale Zukunft
  • Wissenschaftskommunikation Energiewende: Für Energieforschung begeistern und Innovationen für das Energiesystem von morgen zeigen.

Wie können wir die Energiewende gemeinsam umsetzen? Dieser Frage widmet sich ab 2022 eine Ausstellung, die das gesamte Bundesgebiet bereist und durch zahlreiche Veranstaltungen und partizipative Angebote begleitet wird. In dem gemeinsamen Projekt präsentieren Forschungseinrichtungen, Hochschulen, Ausstellungshäuser sowie Akteure der Wissenschaftskommunikation Lösungen für eine sichere, wirtschaftliche und klimaneutrale Energieversorgung und nehmen Ideen und Meinungen der Bürgerinnen und Bürger dazu auf. Parallel werden die Wahrnehmung des Themas Energiewende in der Öffentlichkeit und die Wirkung des Projekts selbst erforscht.

Ausstellung ab April 2022

Im Mittelpunkt steht eine Ausstellung, die vom Industriemuseum des Landschaftsverbandes Westfalen-Lippe (LWL) und dem Klimahaus Bremerhaven 8° Ost entwickelt wird. Erste Station ist ab April 2022 die Henrichshütte Hattingen im Ruhrgebiet, ab Oktober 2022 ist die Ausstellung im Klimahaus zu sehen. Sie stellt mit Hilfe interaktiver und partizipativer Elemente Konzepte und Ideen der Energiewende sowie innovative Forschungsprojekte vor. Dabei werden auch die regionalen Besonderheiten im Umfeld der beiden Ausstellungshäuser aufgegriffen. Im Anschluss an die Präsentation in Hattingen und Bremerhaven tourt eine daraus entwickelte Wanderausstellung durch das Bundesgebiet.

Die Konzeption der Ausstellung und ihre Rezeption werden von der TU Ilmenau kommunikationswissenschaftlich begleitet. Erkenntnisse aus der Begleitforschung können dadurch direkt in die Ausstellung und das Rahmenprogramm zurückfließen. Im Zentrum des Projekts steht dabei die Frage, wie erfolgreiche Wissenschaftskommunikation zur Energiewende vor allem mit Blick auf regionale Aspekte gelingen kann und welchen Einfluss standortspezifische Faktoren auf die Rezeption haben.

Projektpartner

    Industriemuseum des Landschaftsverbandes Westfalen-Lippe (LWL)
    Klimahaus Bremerhaven 8° Ost
    Technische Universität Ilmenau, Fachgebiet Empirische Medienforschung und politische Kommunikation
    DECHEMA Gesellschaft für chemische Technik und Biotechnologie e. V.
    Fraunhofer UMSICHT
    Fraunhofer-Cluster CINES
    Wissenschaft im Dialog

Kooperationspartner

    Kopernikus Projekte für die Energiewende
    Carbon2Chem®

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

Virtuelle Verleihung des UMSICHT-Wissenschaftspreises 2021 © Shutterstock
UMSICHT-Wissenschaftspreis 2021
17.05.2021

Virtuelle Verleihung des UMSICHT-Wissenschaftspreises 2021

Das letzte Jahr und insbesondere die mediale Aufmerksamkeit rund um die Corona-Pandemie zeigen, wie wichtig eine verständliche und zielgruppenorientierte Kommunikation wissenschaftlicher Themen ist und welchen hohen Stellenwert die Wissenschaft einnimmt. Den Dialog zwischen Wissenschaft und Gesellschaft zu fördern, ist das Ziel des UMSICHT-Wissenschaftspreises, der 2021 zum zwölften Mal vom UMSICHT-Förderverein verliehen wird. Erfahren Sie im Rahmen der Preisverleihung mehr über die spannenden Beiträge der Preisträgerinnen und Preisträger in den Kategorien Wissenschaft und Journalismus.

Die diesjährige Bekanntgabe der Preisträger*innen und Preisverleihung findet am Donnerstag, den 24. Juni 2021 aufgrund der aktuellen Situation virtuell statt. Auf der Veranstaltung kann man sich über aktuelle Themen und Trends in der Wissenschaft und Wissenschaftskommunikation informieren. Nähere Informationen und auch bereits den Link zur Veranstaltung finden sie hier.

Das letzte Jahr und insbesondere die mediale Aufmerksamkeit rund um die Corona-Pandemie zeigen, wie wichtig eine verständliche und zielgruppenorientierte Kommunikation wissenschaftlicher Themen ist und welchen hohen Stellenwert die Wissenschaft einnimmt. Den Dialog zwischen Wissenschaft und Gesellschaft zu fördern, ist das Ziel des UMSICHT-Wissenschaftspreises, der 2021 zum zwölften Mal vom UMSICHT-Förderverein verliehen wird. Erfahren Sie im Rahmen der Preisverleihung mehr über die spannenden Beiträge der Preisträgerinnen und Preisträger in den Kategorien Wissenschaft und Journalismus.

Die diesjährige Bekanntgabe der Preisträger*innen und Preisverleihung findet am Donnerstag, den 24. Juni 2021 aufgrund der aktuellen Situation virtuell statt. Auf der Veranstaltung kann man sich über aktuelle Themen und Trends in der Wissenschaft und Wissenschaftskommunikation informieren. Nähere Informationen und auch bereits den Link zur Veranstaltung finden sie hier.

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

(c) Huntsman Textile Effects
12.05.2021

Huntsman Textile Effects at Performance Days Digital Fair Week

  • Huntsman Textile Effects presents range of high-performance solutions for performance apparel

Huntsman Textile Effects, global leader in innovative solutions and environmentally sustainable products, will highlight its extensive end-to-end suite of protection effects and high-performance solutions for performance apparel at the Performance Days Digital Fair Week this May. Huntsman will also deliver a presentation on sustainability, showcasing the top megatrends impacting the textile industry.

With increasing adoption of active lifestyles and outdoor activities, consumers are demanding high-performance, yet comfortable and sustainably-produced sportswear. Consumers are looking for brands that incorporate sustainable processes and principles in their operations.

  • Huntsman Textile Effects presents range of high-performance solutions for performance apparel

Huntsman Textile Effects, global leader in innovative solutions and environmentally sustainable products, will highlight its extensive end-to-end suite of protection effects and high-performance solutions for performance apparel at the Performance Days Digital Fair Week this May. Huntsman will also deliver a presentation on sustainability, showcasing the top megatrends impacting the textile industry.

With increasing adoption of active lifestyles and outdoor activities, consumers are demanding high-performance, yet comfortable and sustainably-produced sportswear. Consumers are looking for brands that incorporate sustainable processes and principles in their operations.

“The upward trend in the performance apparel segment is spurred on by the demands and evolving needs of consumers; sustainability also remains the top of mind amongst these consumers. At Huntsman, we are delighted to be able showcase our suite of solutions that are high-performing and sustainable, so that mills and brands are better able to meet the fast-changing market needs,” said Dhirendra Gautam, Senior Director – Global Market Strategy and Innovation, Huntsman Textile Effects.

Huntsman’s featured solutions:

  • Complete end-to-end systems for protection effects, from pre-treatment to coloration and finishing
  • Revolutionary antimicrobial and odor-control solutions from Sciessent - The Agion®, Lava X2® and Active X2® products will be featured at the upcoming show
  • HIGH IQ® intelligent effects is a set of brand assurance programs that support accelerated evaporation, water and stain repellence, lasting color and cool comfort, ensuring garments dry quickly for long-lasting comfort

Performance Days Digital Fair Week will take place digitally from May 17-21, 2021. Huntsman will also deliver a presentation on May 18, 2021, at 2 p.m. (CEST) at the Expert Talk session. Titled “Sustainability & Textiles: Being the Change That We Want to See”, the presentation will showcase the megatrends that will define the next five years, and the textile and apparel industries’ quest for more sustainable design, product development, production methods and garment care.

Source:

Huntsman Textile Effects

11.05.2021

Devan launches bio-based softener and quick-dry finish

Devan Chemicals recently added two more products to its range of bio-based textile finishes. One being a softener, the other one a quick-dry finish. Both are derived from vegetable oils and are in line with the company’s latest innovations on bio-based chemistry.

Due to the Covid-pandemic, serving as an accelerator for a worldwide green economy, the textile industry is increasingly seeking more sustainable and products fit-for-circular programs. According to McKinsey & Company, the textile industry will experience innovation surrounding sustainably sourced raw materials and bio-based chemical additives to accommodate increasing consumer demand.

Devan Chemicals recently added two more products to its range of bio-based textile finishes. One being a softener, the other one a quick-dry finish. Both are derived from vegetable oils and are in line with the company’s latest innovations on bio-based chemistry.

Due to the Covid-pandemic, serving as an accelerator for a worldwide green economy, the textile industry is increasingly seeking more sustainable and products fit-for-circular programs. According to McKinsey & Company, the textile industry will experience innovation surrounding sustainably sourced raw materials and bio-based chemical additives to accommodate increasing consumer demand.

Devan launched its first bio-based technology in 2019 and is fully committed to making bio-based versions of their existing textile finishes. ‘We have put ourselves on a mission to be able to extend our Bio-Based range further”, says Sven Ghyselinck, CEO of Devan. “We wanted to make an even bigger impact on circularity than before, therefore we looked into what fabric producers use a lot: softeners and moisture management systems. Only by focusing more on the large volume products, can we support the industry to have a bigger impact on sustainability. After the growing success of our natural antimicrobial BI-OME NTL, we are proud to now introduce our new natural Passerelle line”.

Passerelle Soft NTL is a durable softness technology based on vegetable ingredients. The technology is wash durable and can be used with natural fibres like hemp, cotton, but is also fit for synthetic fibres like rPES, PA. The bio content of the technology is above 85% (ASTM D6866-20).

Passerelle Quick-Dry NTL is a moisture management technology also based on vegetable ingredients. This bio-based finish enables high wicking and evaporation capability which helps to evaporate water/sweat easier and faster. The technology is also > 60% (28 days) biodegradable according to OECD 301B.

06.05.2021

Technologieatlas Nachhaltigkeit: Familienunternehmen prägen die wichtigsten Umwelttechnologien

Wie entwickeln und nutzen Familienunternehmen in Deutschland Umwelttechnologien, und welchen Beitrag leisten sie zum Umweltschutz? Das untersuchte das Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT für die Stiftung Familienunternehmen in der heute veröffentlichten Studie »Technologieatlas Nachhaltigkeit«. Das Ergebnis: Familienunternehmen sind in den 15 wichtigsten Umwelttechnologien sehr aktiv und tragen in hohem Maße zum Klimaschutz, zur Ressourcen- und Energiewende, zur Digitalisierung oder auch zur nachhaltigen Mobilität bei.

Wie entwickeln und nutzen Familienunternehmen in Deutschland Umwelttechnologien, und welchen Beitrag leisten sie zum Umweltschutz? Das untersuchte das Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT für die Stiftung Familienunternehmen in der heute veröffentlichten Studie »Technologieatlas Nachhaltigkeit«. Das Ergebnis: Familienunternehmen sind in den 15 wichtigsten Umwelttechnologien sehr aktiv und tragen in hohem Maße zum Klimaschutz, zur Ressourcen- und Energiewende, zur Digitalisierung oder auch zur nachhaltigen Mobilität bei.

Damit Europa bis 2050 der erste klimaneutrale Kontinent wird – so legten es die Staaten der EU im European Green Deal fest - , sind vielfältige Technologien im Bereich der Umwelttechnik notwendig. Welche Technologien und Branchen genau dazu gehören, wie sich diese priorisieren oder bewerten lassen, und wie Familienunternehmen diese voranbringen, untersuchte das Fraunhofer UMSICHT in einer Studie. Das Forschungsteam erstellte einen »Technologieatlas Nachhaltigkeit«, der den gegenwärtigen Stand der Umwelttechnik in Deutschland beschreibt. Hierin wurde speziell der Beitrag von Familienunternehmen identifiziert, und es wurden Perspektiven für zukünftige, nachhaltige Entwicklungen aufgezeigt.

Untersuchte Umwelttechnologien
Folgende Technologien wurden betrachtet: Photovoltaik, Windkraft, Recycling, Biotechnologie, Wasseraufbereitung und Abwasserbehandlung, Wärmepumpen, Batterien, Wärmedämmung (thermische Isolierung), Leichtbau, Smart Home, Wasserstofftechnologie, Luftreinhaltung, Biokunststoffe, E-Fuels und übergreifend die Digitalisierung.  

Die Wissenschaftler*innen erstellten zu jeder Technologie Steckbriefe, die unter anderem Märkte und Arbeitsplätze, spezifische Herausforderungen und Hemmnisse, Innovationen und Zukunftsperspektiven aufzeigen. Die Studie und die Steckbriefe beruhen auf einer intensiven Literaturrecherche, Interviews mit Expert*innen in den Unternehmen und dem Input aus einen Beiratstreffen mit Vertreter*innen aus Familienunternehmen und Vertretern aus der Politik.

Familienunternehmen tragen in großem Maß zur Ressourcenschonung bei
In den Technologiefeldern Photovoltaik und Windkraft sind die meisten Familenunternehmen tätig. Weiterhin weisen die Bereiche E-Fuels, Wasserstoff und Batterien perspektivisch ein starkes Wachstumspotenzial auf. Eins der übergreifenden Ergebnisse: Familienunternehmen übernehmen in der Entwicklung und Anwendung der wichtigsten Umwelttechnologien eine wichtige Rolle. »Sie erachten den Kampf gegen den Klimawandel und Ressourcenschonung als zentrale Aufgabe und leisten wesentliche Beiträge, um die damit verbundenen Herausforderungen zu bewältigen. Sie sind bereit, in Innovationen zu investieren«, erläutert Markus Hiebel, Leiter der Studie und Abteilungleiter Nachhaltigkeit und Partizipation des Fraunhofer UMSICHT.

Wasserstofftechnologien, E-Fuels und Batterien sind Schlüsseltechnologien zur Sektorenkopplung. Die Verbindung über Branchen hinaus erfordert eine hohe Flexibilität der beteiligten Unternehmen – eine Fähigkeit, die insbesondere Familienunternehmen zugesprochen wird. »Unsere Klimaziele werden wir nur mit einer Vielzahl verschiedener und sich ergänzender Aktivitäten und Technologien erreichen. Das Know-How der Familienunternehmen in ihren jeweiligen Nischen ist dafür der wesentliche Schlüssel zum Erfolg«, sagt Stefan Heidbreder, Geschäftsführer der Stiftung Familienunternehmen.

Entscheidend für den weiteren Erfolg ist, dass die Politik technologieoffen agiert. Alle relevanten Umwelttechnologien sollten gleichermaßen berücksichtigt und keine diskriminiert werden. Der politische Rahmen sollte zudem planbar, verlässlich und möglichst global sein. Es braucht auch eine leistungsfähige digitale Infrastruktur sowie eine höhere Verfügbarkeit von Expert*innen.

Wesentliche Innovationstreiber im Bereich der Umwelttechnik sind oft staatliche Regulierungen wie ein Preis für CO2 oder Mindestrecyclingquoten. Um eine verlässliche Steuerungswirkung zu entfalten, sollten diese länderübergreifend gültig sein.

Die Studie ist als PDF zum Download beigefügt.

 

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

Neonyt Sommer 2021 / Frankfurt Fashion Week on-Demand (c) Messe Frankfurt GmbH
05.05.2021

Neonyt Sommer 2021 / Frankfurt Fashion Week on-Demand

  • Digitale Sommersaison: Neonyt sorgt für Nachhaltigkeit im Streamingprogramm des Frankfurt Fashion Week Studios

Messen, Events und Runways stehen auf hold, digitale Formate halten uns weiter up-to-date – die anhaltend schwierige gesundheitliche Lage sowie die aktuellen Beschlüsse seitens der Bundesregierung hinsichtlich Covid-19 machen den physischen Kick-Off der Frankfurt Fashion Week vom 5. bis 9. Juli 2021 unmöglich. Damit ist auch klar: Es wird diesen Sommer kein Face-to-face für die Neonyt-Community geben. Das neue FFW Studio wird derweil zum digitalen Meeting-Point für alle Fashion-Professionals.

Eine weitere Saison ohne persönliche Begegnungen, Handshake-Deals und ausgelassene Stimmung nach einem erfolgreichen Messetag: Die Sustainable Fashion-Szene muss auch im Sommer 2021 auf eine physische Neonyt verzichten. Aufgrund der andauernden pandemischen Situation und der bundeseinheitlichen Corona-Notbremse findet die neue Frankfurt Fashion Week ausschließlich digital statt – dafür lancieren die Initiatoren, die Messe Frankfurt und die Premium Group, das FFW Studio.

  • Digitale Sommersaison: Neonyt sorgt für Nachhaltigkeit im Streamingprogramm des Frankfurt Fashion Week Studios

Messen, Events und Runways stehen auf hold, digitale Formate halten uns weiter up-to-date – die anhaltend schwierige gesundheitliche Lage sowie die aktuellen Beschlüsse seitens der Bundesregierung hinsichtlich Covid-19 machen den physischen Kick-Off der Frankfurt Fashion Week vom 5. bis 9. Juli 2021 unmöglich. Damit ist auch klar: Es wird diesen Sommer kein Face-to-face für die Neonyt-Community geben. Das neue FFW Studio wird derweil zum digitalen Meeting-Point für alle Fashion-Professionals.

Eine weitere Saison ohne persönliche Begegnungen, Handshake-Deals und ausgelassene Stimmung nach einem erfolgreichen Messetag: Die Sustainable Fashion-Szene muss auch im Sommer 2021 auf eine physische Neonyt verzichten. Aufgrund der andauernden pandemischen Situation und der bundeseinheitlichen Corona-Notbremse findet die neue Frankfurt Fashion Week ausschließlich digital statt – dafür lancieren die Initiatoren, die Messe Frankfurt und die Premium Group, das FFW Studio.

 „Ein spektakuläres Mega-Event, wie die Frankfurt Fashion Week eines ist, verdient einen ebenso spektakulären Kick-Off“, sagt Olaf Schmidt, Vice President Textiles & Textile Technologies, Messe Frankfurt. „Dieser ist uns für Sommer 2021 leider noch nicht vergönnt – davon lässt sich das Team hinter der Frankfurt Fashion Week jedoch nicht unterkriegen. Mit Hochdruck wird an digitalen Komponenten gearbeitet, die das Fashion Week-Feeling überall dorthin bringen, wo sich die Community zu dem Zeitpunkt gerade befindet. Live und on-Demand: Das neue FFW Studio bietet die Möglichkeit, die internationale Fashion-Szene trotz Kontaktbeschränkungen an einem Ort zusammenzubringen und die Textilexpertise unserer Community in die ganze Welt zu streamen.“

 „Stell dir vor, es ist Fashion Week und keiner geht hin – diese Worte habe ich Ende 2020 gehört, als wir bereits zum zweiten Mal eine physische Neonyt absagen mussten“, sagt Thimo Schwenzfeier, Show Director Neonyt. „Damals waren sie wohl eher zur Aufmunterung über die erneute Absage gedacht, heute messe ich ihnen wesentlich mehr Gewicht bei. Nach gut eineinhalb Jahren Veranstaltungsstopp und Zwangspause waren wir alle – das Team und vor allem unsere Cross Sector-Community – mehr als bereit für den großen Auftakt in Frankfurt am Main. Das hat nicht zuletzt der sehr gute Anmeldestand unserer Brands für Sommer 2021 gezeigt. Letztlich geht jedoch die Gesundheit aller vor und daher freuen wir uns auf die digitale Ausgabe der Frankfurt Fashion Week, das FFW Studio, und darauf, den Sustainability-Content und die Expertise unserer Brands und Speaker*innen im Programm zu platzieren.“

Das FFW Studio geht im Juli auf der Frankfurt Fashion Week-Website www.frankfurt.fashion live und wird der zentrale Anlaufpunkt für alle Textil- und Modeprofis, Kreativen, Labels und Fashion Week-Neulinge. Per Livestream wird das internationale Publikum vom 5. bis 9. Juli 2021 über verschiedene Channels das Neueste aus der Fashion-Welt erfahren. Für professionell kuratierten Input und Business-Insights aus der Textil- und Modebranche ist gesorgt. Ganz oben auf der Agenda: die Leitmotive der Frankfurt Fashion Week, Nachhaltigkeit und Digitalisierung. Im Anschluss an den fünftägigen Livestream werden alle Talks, Master Classes, Keynotes und Präsentationen on-Demand zur Verfügung stehen.

 Die digitale Interimssaison lässt die Vision der neuen interdisziplinären Frankfurt Fashion Week Realität werden und verspricht allen Stakeholder*innen Einblicke in zukunftsrelevante Themenbereiche der internationalen Textil- und Modebranche. Das Programm wird gemeinsam mit Partner*innen aus Politik, Handel, Industrie und Medien entwickelt – Future Talks und Deep Dives in die Fashion-Welt werden ergänzt durch die beiden Leit-Konferenzen, der Frankfurt Fashion SDG Summit sowie die EU New Bauhaus Konferenz, die beide erstmals im Rahmen der Frankfurt Fashion Week ausgerichtet werden. Über drei volle Tage hinweg, vom 6. bis 8. Juli, liefert zudem die internationale Neonyt-Konferenz Fashionsustain Impulse und Know-How aus der nachhaltigen Modeszene.

Carmen Hijosa (c) Europäisches Patentamt
Carmen Hijosa
04.05.2021

Preiswürdig: Ananasblätter als nachhaltige Alternative für Leder

  • Spanische Unternehmerin Carmen Hijosa als Finalistin für Europäischen Erfinderpreis 2021 des Europäischen Patentamts (EPA) nominiert
  • Hijosa entwickelte ein Verfahren, das Ananasblätter in eine weiche, haltbare und vielseitige Textilie verwandelt
  • Umweltfreundliche Alternative unterstützt die Landwirtschaft und ist bei führenden internationalen Modefirmen gefragt

 Das Europäische Patentamt (EPA) gibt die Nominierung der spanischen Unternehmerin Carmen Hijosa für den Europäischen Erfinderpreise 2021 als Finalistin in der Kategorie „KMU“ (Kleine und mittlere Unternehmen) bekannt. Sie hat eine Lederalternative und gleichermaßen innovative Textilie aus den Fasern von Ananasblättern entwickelt, die aus einer Abfallressource hergestellt wird und im Vergleich zur Herstellung von Rindsleder die Umwelt weniger belastet.

Die Gewinner des jährlichen Innovationspreises des EPA werden am 17. Juni 2021 ab 19 Uhr im Rahmen einer Galaveranstaltung bekannt gegeben, die in diesem Jahr als digitales Event für ein weltweites Publikum neu konzipiert wurde.

  • Spanische Unternehmerin Carmen Hijosa als Finalistin für Europäischen Erfinderpreis 2021 des Europäischen Patentamts (EPA) nominiert
  • Hijosa entwickelte ein Verfahren, das Ananasblätter in eine weiche, haltbare und vielseitige Textilie verwandelt
  • Umweltfreundliche Alternative unterstützt die Landwirtschaft und ist bei führenden internationalen Modefirmen gefragt

 Das Europäische Patentamt (EPA) gibt die Nominierung der spanischen Unternehmerin Carmen Hijosa für den Europäischen Erfinderpreise 2021 als Finalistin in der Kategorie „KMU“ (Kleine und mittlere Unternehmen) bekannt. Sie hat eine Lederalternative und gleichermaßen innovative Textilie aus den Fasern von Ananasblättern entwickelt, die aus einer Abfallressource hergestellt wird und im Vergleich zur Herstellung von Rindsleder die Umwelt weniger belastet.

Die Gewinner des jährlichen Innovationspreises des EPA werden am 17. Juni 2021 ab 19 Uhr im Rahmen einer Galaveranstaltung bekannt gegeben, die in diesem Jahr als digitales Event für ein weltweites Publikum neu konzipiert wurde.

Für die kommerzielle Verwertung ihrer Erfindung hat Hijosa 2013 in London ein KMU gegründet. Ihre natürliche Lederalternative unterstützt Landwirte und Genossenschaften auf den Philippinen und ist auch bei großen internationalen Modemarken gefragt.

Source:

Europäisches Patentamt

(c) Kornit Digital
04.05.2021

Sustainable On-Demand Textile Production: new Partners for Kornit Digital

  • Global online fashion retailer and UK supplier - Asos and Fashion-Enter Ltd. - teaming with Kornit for adoption of efficient, low-impact direct-to-fabric digital textile printing with zero water waste and accelerated production speeds

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announced that global online fashion retailer ASOS and its supplier Fashion-Enter Ltd. are implementing Kornit Presto to explore the future opportunities presented by on-demand manufacturing.

Kornit Presto is the most advanced single-step solution for direct-to-fabric printing, enabling Fashion-Enter Ltd. to rapidly deliver test-and-repeat small product runs on behalf of ASOS. These production capabilities will enable ASOS and Fashion-Enter Ltd. to imprint designs on multiple fabrics at the push of a button, through a lower-impact production process that has zero water waste and accelerates production speeds by cutting out typical dyeing processes.

  • Global online fashion retailer and UK supplier - Asos and Fashion-Enter Ltd. - teaming with Kornit for adoption of efficient, low-impact direct-to-fabric digital textile printing with zero water waste and accelerated production speeds

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announced that global online fashion retailer ASOS and its supplier Fashion-Enter Ltd. are implementing Kornit Presto to explore the future opportunities presented by on-demand manufacturing.

Kornit Presto is the most advanced single-step solution for direct-to-fabric printing, enabling Fashion-Enter Ltd. to rapidly deliver test-and-repeat small product runs on behalf of ASOS. These production capabilities will enable ASOS and Fashion-Enter Ltd. to imprint designs on multiple fabrics at the push of a button, through a lower-impact production process that has zero water waste and accelerates production speeds by cutting out typical dyeing processes.

In Kornit’s pigment-based digital textile production capabilities and efficient workflow solutions, Fashion-Enter Ltd. sees an answer for brands serving the needs of today’s consumers, while reducing inventory waste and improving supply chain management and garment quality.

04.05.2021

Target climate neutrality: Lenzing invests EUR 200 mn in Asia

  • CO2 emissions will be reduced by 320,000 tons per year
  • First supplier of wood-based cellulosic fibers in China to completely eliminate coal
  • Share in eco-responsible specialty fibers will be significantly increased
  • Lenzing is strategically well on track with these investments

The Lenzing Group, the leading global supplier of wood-based specialty fibers, will invest more than EUR 200 mn in its production sites in Purwakarta (Indonesia) and Nanjing (China) to convert existing standard viscose capacity into environmentally responsible specialty fibers.

In Nanjing (China) Lenzing will establish the first wood-based fiber complex in China that is independent from coal as an energy source. By using natural gas based cogeneration, Lenzing will reduce CO2 emissions at the site by more than 200,000 tons. At the same time a line of standard viscose will be converted to a 35.000 tons TENCEL™ branded modal fibers line making Lenzing (Nanjing) Fibers Co., Ltd a 100 percent wood-based specialty fiber site by the end of 2022.

  • CO2 emissions will be reduced by 320,000 tons per year
  • First supplier of wood-based cellulosic fibers in China to completely eliminate coal
  • Share in eco-responsible specialty fibers will be significantly increased
  • Lenzing is strategically well on track with these investments

The Lenzing Group, the leading global supplier of wood-based specialty fibers, will invest more than EUR 200 mn in its production sites in Purwakarta (Indonesia) and Nanjing (China) to convert existing standard viscose capacity into environmentally responsible specialty fibers.

In Nanjing (China) Lenzing will establish the first wood-based fiber complex in China that is independent from coal as an energy source. By using natural gas based cogeneration, Lenzing will reduce CO2 emissions at the site by more than 200,000 tons. At the same time a line of standard viscose will be converted to a 35.000 tons TENCEL™ branded modal fibers line making Lenzing (Nanjing) Fibers Co., Ltd a 100 percent wood-based specialty fiber site by the end of 2022.

In Purwakarta (Indonesia), Lenzing will reduce its CO2 emissions by increasingly using biogenic fuels. Additional investments to reduce emissions to air and water will make this facility fully compliant with the EU Ecolabel by the end of 2022. That will allow converting standard viscose capacity into LENZING™ ECOVERO™ branded fibers for textile applications as well as LENZING™ Viscose Eco fibers for personal care and hygiene applications. As a result, the site in Indonesia will also become a pure specialty viscose supplier as of 2023.

Both investments are fully in line with Lenzing’s target to reduce its greenhouse gas emissions per ton of product by 50 percent by 2030. By avoiding or reducing the use of fossil fuels at the two sites, the Lenzing Group will be able to reduce CO2 emissions by more than 320,000 tons in total, or 18 percent, compared to 2017. In addition, this investment allows Lenzing also to reduce its total sulfur emissions by more than 50 percent, compared to 2019.

Together with its major lyocell fiber project in Thailand, Lenzing will also boost its share in specialty fibers as a percentage of fiber revenues to well above the targeted 75 percent already by 2023, which in turn is an important step towards achieving the company’s EBITDA target of EUR 800 mn by 2024.

 

More information:
climate-neutral viscose fibers
Source:

Lenzing AG

ITA
04.05.2021

2021 Aachen Reinforced! Symposium free of charge for all attendees

Institut für Textiltechnik of RWTH Aachen University has changed the format of the 2021 Aachen Reinforced! Symposium to an online only format. The programme was shortened to suit the new format, with presentations taking place on Monday 10th May and Tuesday 11th May.

Institut für Textiltechnik of RWTH Aachen University has changed the format of the 2021 Aachen Reinforced! Symposium to an online only format. The programme was shortened to suit the new format, with presentations taking place on Monday 10th May and Tuesday 11th May.

The conference program for Monday, 10th May:
The programme will begin with exciting presentations on glass chemistry and fibres. A talk by Dr Anne Berthereau (Owens Corning Composites) on the race for always higher modulus glass fibres will be followed by a talk from Dr Hong Li (Nippon Electric Glass) on the potential of new high-strength and high-modulus glass fibres.
After two further presentations on high modulus and bioactive glass fibres from Muawia Dafir and Julia Eichhorn (TU Bergakademie Freiberg), we will learn about furnace efficiency as well as process monitoring and digitalisation in glass fibre production from René Meulemann (CelSian), Hans Gedon (Gedonsoft) and Julius Golovatchev (Incotelogy) respectively.
A presentation by Felix Quintero Martínez (Universidade de Vigo) will explore a novel method to produce ultra-flexible glass nanofibers.
The afternoon will continue with two presentations by Dr Christina Scheffler (Leibniz-Institut für Polymerforschung Dresden e.V. (IPF)) and Professor James Thomason (University of Strathclyde) in the field of glass fibre sizings and fibre-matrix interfaces. Finally, a closing presentation by Steve Bassetti (Michelman) will conclude the first day of the Symposium.

The entire conference programme is available on the website https://aachen-fibres.com/aachen-reinforced/general-information.
To register for the Symposium, use the following link: https://aachen-fibres.com/aachen-reinforced/registration

04.05.2021

C.L.A.S.S.: THE TEXTILE LIBRARY CIRCULAR SYMPOSIUM

How to recognize truly sustainable fashion? How can responsible recycling of garments and fabrics - as well as new formulas for circular economy - make a difference in fighting the climate emergency? These are just some of the topics addressed during THE TEXTILE LIBRARY CIRCULAR SYMPOSIUM, the open-ended program of virtual meetings with some of the most influential fashion and sustainability experts organized by the Museo del Tessuto di Prato in collaboration with C.L.A.S.S. ecohub.

The museum and the international platform that creates awareness and supports professionals who believe in fashion and sustainable textiles have joined forces to talk not only to fashion enthusiasts but to everyone, and explore a hot and often underestimated topic that involves everyday life. The series of meetings deepens and complements the new section entirely dedicated to circular textiles in the museum's Textile Library.

How to recognize truly sustainable fashion? How can responsible recycling of garments and fabrics - as well as new formulas for circular economy - make a difference in fighting the climate emergency? These are just some of the topics addressed during THE TEXTILE LIBRARY CIRCULAR SYMPOSIUM, the open-ended program of virtual meetings with some of the most influential fashion and sustainability experts organized by the Museo del Tessuto di Prato in collaboration with C.L.A.S.S. ecohub.

The museum and the international platform that creates awareness and supports professionals who believe in fashion and sustainable textiles have joined forces to talk not only to fashion enthusiasts but to everyone, and explore a hot and often underestimated topic that involves everyday life. The series of meetings deepens and complements the new section entirely dedicated to circular textiles in the museum's Textile Library.

Like a real symposium, THE TEXTILE LIBRARY CIRCULAR SYMPOSIUM is a conversation arena involving 10 game changers who have been able to innovate not only with high-tech and responsible products and materials but also with new formulas, business models and production systems that respect the planet and people. Among the speakers of the cycle, visionary innovators who generate change at all levels: from the entire production system and beyond to retailers, leading international brands, research companies and communication experts, all the way to the final consumer.

The first appointment is Wednesday, May 13 at 5 pm CEST with the talk THE SUSTAINABLE PERSPECTIVE. True sustainable fashion is a choral and capillary system in which every actor plays a fundamental role. During the meeting, professionals from different fields, from cultural institutions to industrial production, from marketing to retail, will share their perspective on sustainability.

Recycling is the key word in THE SECOND CHANCE, the second meeting scheduled for June 10 h. 5 p.m CEST.

On September 29, also at 5 p.m. CEST, appointment for the talk A TICKET TO FASHION... AND BACK entirely dedicated to the new models of circular economy.

You can register here.

Source:

C.L.A.S.S. / GB Network Marketing & Communication

(c) Hochschule Niederrhein
(von links): Prof. Dr.-Ing. Markus Muschkiet (Leiter Center Textillogistik, Hochschule Niederrhein), Jan-Philipp Jarmer (Fraunhofer-Institut für Materialfluss und Logistik IML), Ida Marie Brieger (Center Textillogistik, Hochschule Niederrhein)
03.05.2021

Hochschule Niederrhein: Über Sortierung Alttextilien besser recyceln

Das Recyceln von Textilien wird im Sinne einer nachhaltigen Kreislaufwirtschaft immer wichtiger. Das Center Textillogistik der Hochschule Niederrhein und das Fraunhofer-Institut für Materialfluss und Logistik IML führen derzeit im Auftrag der Stadtreinigung Hamburg eine Begutachtung und Bewertung von Alttextilien in den Räumen des Monforts Quartier in Mönchengladbach durch. Nachhaltige Ansätze für die Textilwirtschaft der Zukunft stehen im Vordergrund, aber auch die Vorbereitung auf sich ändernde rechtliche Rahmenbedingungen im Markt für Alttextilien.

Ab 2025 sollen in Europa im Rahmen des EU-Aktionsplans für Kreislaufwirtschaft gebrauchte Textilien flächendeckend getrennt gesammelt werden, um die Wiederverwendung sowie ein hochwertiges Recycling zu fördern. Im Projekt sollen Möglichkeiten eruiert werden, ob und wie gewisse textile Stoffströme separiert gesammelt werden können.

Das Recyceln von Textilien wird im Sinne einer nachhaltigen Kreislaufwirtschaft immer wichtiger. Das Center Textillogistik der Hochschule Niederrhein und das Fraunhofer-Institut für Materialfluss und Logistik IML führen derzeit im Auftrag der Stadtreinigung Hamburg eine Begutachtung und Bewertung von Alttextilien in den Räumen des Monforts Quartier in Mönchengladbach durch. Nachhaltige Ansätze für die Textilwirtschaft der Zukunft stehen im Vordergrund, aber auch die Vorbereitung auf sich ändernde rechtliche Rahmenbedingungen im Markt für Alttextilien.

Ab 2025 sollen in Europa im Rahmen des EU-Aktionsplans für Kreislaufwirtschaft gebrauchte Textilien flächendeckend getrennt gesammelt werden, um die Wiederverwendung sowie ein hochwertiges Recycling zu fördern. Im Projekt sollen Möglichkeiten eruiert werden, ob und wie gewisse textile Stoffströme separiert gesammelt werden können.

Die Ergebnisse des Projekts sollen auf breiter Basis den verantwortungsbewussten Umgang mit textilen Ressourcen verbessern. Derzeit werden Alltextilien in Deutschland überwiegend durch Depotcontainer im öffentlichen Raum oder auf Recyclinghöfen gesammelt. Zudem wird die Rückgabe von Alttextilien im Einzelhandel verschiedener Marken und Kaufhäusern beworben. Laut einer Studie kamen im Jahr 2018 rund 1,3 Millionen Tonnen Alttextilien zusammen. Davon werden 88 Prozent durch Containersammlungen, 9 Prozent durch Straßensammlungen und rund 3 Prozent durch sonstige Sammlungen (z. B. durch Modehäuser) erfasst. Die weitere Vermarktung wird nach einem Zwischenschritt beim Sortierer in Wiederverwendung (62 Prozent), Weiterverwendung als Putzlappen oder Dämmstoff (14 Prozent), stoffliches Recycling (12 Prozent) und Verbrennung (12 Prozent) unterteilt.

Bei der Alttextilsortieranalyse werden die Alttextilien in bis zu drei Differenzierungsebenen sortiert. Die erste Differenzierungsebene setzt sich aus den folgenden drei Obergruppen zusammen: Fehlwürfe, Textilien zur Verwertung, Textilien zur Wiederverwendung. Darüber hinaus werden die Alttextilien nach ihrer ursprünglichen Nutzung (z. B Damenoberbekleidung, Kinderbekleidung, Haushaltswäsche etc.) und der Materialzusammensetzung sortiert.

Source:

Hochschule Niederrhein

HYOH: Funktionelle und stylische Outdoor-Produkte (c) HYOH
29.04.2021

HYOH: Funktionelle und stylische Outdoor-Produkte

Mit dem Motto „Hike your own hike“ – abgekürzt HYOH – will das junge Team rund um Gründer Leonard Diepenbrock wieder Lust auf Zeit in der Natur machen. Statt Pauschal-Hotelurlaub lieber mal einen Tagestrip in den nahe gelegen Forst planen.
„Wir wollen mit unseren Produkten motivieren, mehr Zeit draußen zu verbringen. Dabei soll der Fokus auf der Auszeit oder dem Abenteuer in der Natur liegen – ohne sich Gedanken über das Equipment machen zu müssen“, sagt Leonard Diepenbrock, Gründer von HYOH und Geschäftsführer des veganen Labels Jean&Len.

Das Team von HYOH bietet für Ausflüge an den Badesee oder Wochenendtrips einen Kühlrucksack im minimalistischen Design an. Der Inhalt bleibt bis zu 48 Stunden gekühlt – dank Isolierung aus PE-Schaum und absolut dichtem Reißverschluss (der HYOH „no drip zip“ ist isolierend und wasserabweisend) bleibt die Kälte im Rucksack, ohne zu entweichen. Zahlreiche Aufbewahrungsmöglichkeiten verstauen alle Kleinigkeiten, die unterwegs Platz suchen. Mit dem Snap Hook System, das gerne in der Trail Running Szene verwendet wird, lässt sich Zubehör wie Flaschen mittels Karabinerhaken ganz einfach an der Vorderseite befestigen.

Mit dem Motto „Hike your own hike“ – abgekürzt HYOH – will das junge Team rund um Gründer Leonard Diepenbrock wieder Lust auf Zeit in der Natur machen. Statt Pauschal-Hotelurlaub lieber mal einen Tagestrip in den nahe gelegen Forst planen.
„Wir wollen mit unseren Produkten motivieren, mehr Zeit draußen zu verbringen. Dabei soll der Fokus auf der Auszeit oder dem Abenteuer in der Natur liegen – ohne sich Gedanken über das Equipment machen zu müssen“, sagt Leonard Diepenbrock, Gründer von HYOH und Geschäftsführer des veganen Labels Jean&Len.

Das Team von HYOH bietet für Ausflüge an den Badesee oder Wochenendtrips einen Kühlrucksack im minimalistischen Design an. Der Inhalt bleibt bis zu 48 Stunden gekühlt – dank Isolierung aus PE-Schaum und absolut dichtem Reißverschluss (der HYOH „no drip zip“ ist isolierend und wasserabweisend) bleibt die Kälte im Rucksack, ohne zu entweichen. Zahlreiche Aufbewahrungsmöglichkeiten verstauen alle Kleinigkeiten, die unterwegs Platz suchen. Mit dem Snap Hook System, das gerne in der Trail Running Szene verwendet wird, lässt sich Zubehör wie Flaschen mittels Karabinerhaken ganz einfach an der Vorderseite befestigen.

Die wasserabweisende Base Bag im schlichten Design bietet genug Platz und ist leicht zu reinigen. An der Vorderseite der Tasche lässt sich mithilfe von Karabinerhaken weiteres Zubehör befestigen. Da die Base Bag keinen Verschluss hat, können auch sperrige Gegenstände darin verstaut werden.

Das Label HYOH wurde 2020 in Köln gegründet. Produziert werden die Kühlrucksäcke und -taschen bei einem erfahrenen Outdoor-Hersteller in der chinesischen Küstenstadt Xiamen, der alle Kühltaschen von Hand näht. HYOH verwendet für seine Produkte ausschließlich hochwertige Materialen wie thermoplastisches Polyurethan, das die Langlebigkeit der Produkte garantiert. In Zukunft will HYOH der Umwelt zuliebe den Einsatz von recycelten und recyclebaren Materialien weiter ausbauen.

Source:

PR + Presseagentur textschwester

29.04.2021

ISKO launches bluesign® APPROVED fabrics

ISKO announced the launch of bluesign® APPROVED fabrics. The only denim mill in Europe with bluesign® APPROVED fabrics, and one of the highest achievement’s in sustainability. This won honour is only awarded to those that meet the strict safety and environmental requirements of the bluesign® CRITERIA. These certified articles are made from bluesign® APPROVED chemicals and raw materials, and are manufactured with a minimum impact on people and the environment. This enables brands to provide safe products to their consumers, verified as bluesign® PRODUCT, which are sustainably produced without hazardous chemicals.

“When the goal is big, the effort is big. Choosing the right partner means taking safe steps. In this sense, I can gladly say that we will continue on our way with the bluesign® chemical followup process.” – Ebru ÖZKÜÇÜK, Head of Sustainability ISKO.

Through this partnership and certification, ISKO and bluesign® continue their vision of a textile and fashion industry with a future that focuses more attention on people and the environment, because only when both are considered can the industry truly make a positive, long-lasting impact.

ISKO announced the launch of bluesign® APPROVED fabrics. The only denim mill in Europe with bluesign® APPROVED fabrics, and one of the highest achievement’s in sustainability. This won honour is only awarded to those that meet the strict safety and environmental requirements of the bluesign® CRITERIA. These certified articles are made from bluesign® APPROVED chemicals and raw materials, and are manufactured with a minimum impact on people and the environment. This enables brands to provide safe products to their consumers, verified as bluesign® PRODUCT, which are sustainably produced without hazardous chemicals.

“When the goal is big, the effort is big. Choosing the right partner means taking safe steps. In this sense, I can gladly say that we will continue on our way with the bluesign® chemical followup process.” – Ebru ÖZKÜÇÜK, Head of Sustainability ISKO.

Through this partnership and certification, ISKO and bluesign® continue their vision of a textile and fashion industry with a future that focuses more attention on people and the environment, because only when both are considered can the industry truly make a positive, long-lasting impact.

Riri’s SS 2022 collection explores the mind of the future. (c) Riri
Rejoyce RIRI ECO 2021 NEW COLLECTION
28.04.2021

Riri: Post-pandemic emotions

  • Riri’s SS 2022 collection explores the mind of the future.
  • Bright colors, vintage themes as well as timeless designs and attention to detail, combined with concepts that highlight history and processes.

Riri Group’s gaze looks to the future once more, offering a line of accessories where creativity meets cutting-edge technology. This is the scenario spawning the new SS 2022 collection; a range of innovative proposals each representing a different emotional response to the pandemic, an attempt to interpret the emotions, needs and desires of consumers in the coming years.

The Italian-Swiss group, that for almost a century has committed to creating zips and buttons for the world’s most important fashion brands, doubles down on its forward-looking vision. The result is SS 2022 collection, featuring three different aspirational paths to read into the emerging feelings of the “new normal” that is our time and that may characterize the near future.

  • Riri’s SS 2022 collection explores the mind of the future.
  • Bright colors, vintage themes as well as timeless designs and attention to detail, combined with concepts that highlight history and processes.

Riri Group’s gaze looks to the future once more, offering a line of accessories where creativity meets cutting-edge technology. This is the scenario spawning the new SS 2022 collection; a range of innovative proposals each representing a different emotional response to the pandemic, an attempt to interpret the emotions, needs and desires of consumers in the coming years.

The Italian-Swiss group, that for almost a century has committed to creating zips and buttons for the world’s most important fashion brands, doubles down on its forward-looking vision. The result is SS 2022 collection, featuring three different aspirational paths to read into the emerging feelings of the “new normal” that is our time and that may characterize the near future.

REJOICE
Inspired by sensations of euphoria and breaking free from melancholy through evasion and exuberance, Rejoice is the line that sees in positivity and joy of re-living the answer to the months of pandemic and negativity. The optimism that is to come takes the form of a creative and extrovert style, even when it comes to accessories. The inspiration, a triumph of bright colors and timeless styles, comes straight from the streets of Boca, one of Buenos Aires’ most popular neighborhoods thanks to its combination of colors and creative scene. Thus, the Eloxal rio zip is presented once again: with its aluminum chain and colored teeth, matched with a multi-color effect puller. In the range, we can also find the Nylon zip, featuring changing colors matched with buttons that echo their color variations, or the Filmetal 14 zip, big and with eye-catching writings, embossed on the tape.

REBIRTH
Going back to the future, in a more respectful and responsible way, through a rebirth that comes to be thanks to a closer relationship with nature. In this line history and processes through which the product is made are pivotal to tell a new way to approach the world. The range comprises zips and buttons developed with natural material and processed manually. A return to the basics as well as the constant research to reduce resources use respecting the planet are foundation of this line. Part of the Rebirth line are the copper jeans buttons, with a special water-based paint finishing, transparent and protective, or the hemp-derived bio-plastic eyelets, as well as the galalite buttons, a particular bio-degradable plastic, derived from processed milk proteins. A major innovation are our tapes entirely made of recycled polyester, evidence of the commitment by Riri Group to reuse resources.

TIMELESS
Timeless elegance, essential luxury mixed with the highest quality standards for top-of-therange products. Design, materials and colors featuring in this line break away from seasonal trends to become timeless must-haves, essential yet elegant. Every piece is cared for in every detail, created specifically to leave a lasting mark. Buttons, chains and pullers are either made of gold and silver, or they feature the clean and elegant tone of stainless steel. Among the zips, stand out Metal and Simmetrical with luxury finishings, whilst tapes are made with refined materials, such as leather and satin. Essential yet researched, this range comes with square and oval cuts, with geometry being functional and complementary to a timeless elegance.

ANDRITZ Nonwoven bietet innovative Lösungen zur Optimierung des Ressourcenverbrauchs (c)ANDRITZ
Spunlace pilot line
28.04.2021

ANDRITZ Nonwoven offers innovative solutions for optimization of raw material consumption

International technology Group ANDRITZ has always been at the forefront in providing innovative and sustainable solutions for the global nonwovens industry. Optimization of resource management, especially reducing the consumption of raw materials and other substances used and also keeping resources in use for as long as possible, are decisive factors in enabling nonwovens producers to offer competitive and sustainable products.

As a world market leader for nonwovens production equipment and services, ANDRITZ offers a full range of products to meet these challenging demands.

International technology Group ANDRITZ has always been at the forefront in providing innovative and sustainable solutions for the global nonwovens industry. Optimization of resource management, especially reducing the consumption of raw materials and other substances used and also keeping resources in use for as long as possible, are decisive factors in enabling nonwovens producers to offer competitive and sustainable products.

As a world market leader for nonwovens production equipment and services, ANDRITZ offers a full range of products to meet these challenging demands.

Maximizing the evenness of the product across the entire production line is one of the key success factors. The weight profiling product range of ANDRITZ – consisting of ProDynTM and ProWidTM – has been extended by ProWinTM. This new development is the combination of the two existing systems ProDynTM and ProWidTM. It allows nonwovens producers to achieve optimum weight profiling at the crosslapper delivery and increase their process speed by up to 15% at the same time. ProWin combines the long-term process experience and in-depth knowledge ANDRITZ has on needlepunch lines with innovative software to synchronize action across the line. Guillaume Julien, Head of Needlepunch Sales at ANDRITZ Nonwoven, explains,

“We have developed a self-regulating, advanced technology to reduce fiber deposits at the edges of the web and eliminate the “smile” effect across its width. ProWin enables producers to optimize the CV ratio autonomously and precisely while also generating significant fiber savings of up to 10% and increasing production speed. Thus, it also provides a faster ROI.“

When it comes to the spunlace process, a better product quality can be obtained by ensuring that the different equipment units in the production line are consistent with one another. The TT card, the Jetlace hydroentanglement unit, and the neXdry through-air dryer are the perfect combination to obtain premium visual quality and characteristics in the web. For an equivalent amount of fibers, this set-up is designed to produce an even web with significant bulkiness and an excellent MD:CD ratio without impacting the production capacity.

Maximizing performance by minimizing the raw material input and the amount of waste produced is a real driver of cost optimization. This is why ANDRITZ has created and integrated a solution that allows nonwovens producers to retrieve the wasted edges of their spunlace fabric and re-use it as recycled fibers. As a result, roll-good producers can even obtain the same web characteristics as when using virgin fibers, and most importantly, the exact same quality.

ANDRITZ also offers – under the brand Metris – ANDRITZ digital solutions – a variety of several service apps for optimum customer benefit. The Metris Cost Management app is used to track raw material consumption. It is an advanced system aimed at monitoring fiber consumption and allowing in-depth diagnoses to investigate raw material losses and savings grouped by different process areas. Thanks to this Metris application, ANDRITZ customers are able to optimize their system’s consumption of raw materials.

All these innovations are available in ANDRITZ’s technical centers, where ANDRITZ process experts will be glad to welcome customers in order to discuss and define their product expectations.

DELTA plant landesweit erstes C2C®-Warenhaus für Levi Strauss & Co. (c) Delta/ Quadrant4
26.04.2021

DELTA plant landesweit erstes C2C®-Warenhaus für Levi Strauss & Co.

Auf dem Grundstück des Industrieparks „Große Heide Wulfen“ lässt die DELTA Development Group derzeit das grünste Warenhaus Deutschlands entstehen: Mit der innovativen Logistik-Immobilie „Positive Footprint Wearhouse“ holt der niederländische Projektentwickler dabei nicht nur den Denim Leader Levi Strauss & Co. in die Region, sondern realisiert gleichzeitig die deutschlandweit erste Logistikfläche, die dem Nachhaltigkeitsanspruch Cradle-to-Cradle® entspricht. Mit Drees & Sommer im General Construction Management mit der Nachhaltigkeitskonzeption, Bremer BAU als Generalunternehmer, dem Architektenteam von Quadrant4 und mit spezialisierten Investment- und Vermögensverwalter ELREP setzt DELTA so ein Zeichen für zukunftsorientiertes Bauen.

Auf dem Grundstück des Industrieparks „Große Heide Wulfen“ lässt die DELTA Development Group derzeit das grünste Warenhaus Deutschlands entstehen: Mit der innovativen Logistik-Immobilie „Positive Footprint Wearhouse“ holt der niederländische Projektentwickler dabei nicht nur den Denim Leader Levi Strauss & Co. in die Region, sondern realisiert gleichzeitig die deutschlandweit erste Logistikfläche, die dem Nachhaltigkeitsanspruch Cradle-to-Cradle® entspricht. Mit Drees & Sommer im General Construction Management mit der Nachhaltigkeitskonzeption, Bremer BAU als Generalunternehmer, dem Architektenteam von Quadrant4 und mit spezialisierten Investment- und Vermögensverwalter ELREP setzt DELTA so ein Zeichen für zukunftsorientiertes Bauen.

Cradle-to-Cradle® goes Logistik
Innovation trifft Praxis: Circa 70.000 m² umfasst die neue Logistik-Immobilie auf dem revitalisierten Bergbaustandort, die der Modemarke Levi Strauss ab 2023 für eine Mietdauer von 20 Jahren als Distributionszentrum dienen wird. Dabei zeichnet sich das Fullfillment Center vor allem durch den innovativen Cradle-to-Cradle® (kurz: C2C) Ansatz aus. Dieser beschreibt eine zirkuläre Bauweise, die auf den Prinzipien der Wiederverwertung, Ressourcenschonung und Abfallreduktion basiert und das Ziel verfolgt, den ökologischen Fußabdruck so klein wie möglich zu halten. Bei der Übertragung ihres Nachhaltigkeitsanspruchs in die Logistik-Praxis des „Positive Footprint Wearhouse“ konnte DELTA auf die Expertise des Architektenbüros Quadrant4 zurückgreifen, das diesen auf allen Lager-, Büro- und Gemeinschaftsflächen kompromisslos umsetzte.

Eine Architektur mit grünem Faden
Ganz im Sinne des C2C®-Ansatzes sind jegliche Baumaterialien des neuen Zentrums auf Wiederverwertung ausgelegt und werden in einer Material-Datenbank erfasst. Am Ende der Nutzungsperiode ermöglicht eine spezielle architektonische Verwendung die problemlose Trennung nach Materialtyp. Um die Luftqualität der Innenräume konstant hoch zu halten, wurden zudem ausschließlich schadstoffarme Materialien verwendet. Nicht nur beim Thema Gesundheit rückt die Immobilie den Menschen in den Mittelpunkt: Auf Grundlage des „Human Centered Designs“ ist das Zentrum auf sozialen Austausch und Inspiration ausgelegt und mit zahlreichen Gemeinschafts- und Grünflächen ausgestattet. Grün ist der Firmenstandort dabei sowohl im wörtlichen als auch im übertragenen Sinne: Neben den Grünflächen im Außenbereich verfügt die Immobilie über einen Dachgarten, der sowohl zur Aufrechterhaltung der Biodiversität als auch als Sammelstelle und Kläranlage des gebäudeinternen Wasserkreislaufs eingesetzt wird. Durch den Einsatz erneuerbarer Energiequellen kann Zentrum einen Großteil seines Energiebedarfs selbst decken. LEED1- und WELL2-Zertifizierungen untermauern den Nachhaltigkeitscharakter des Gebäudes zusätzlich.

Der nächste wichtige Schritt: Delta und Levi’s treiben Nachhaltigkeit voran
„Bereits seit 2003 folgen wir bei DELTA fast ausschließlich dem C2C®-Leitbild und rücken so konsequent die Zukunft des Planeten in den Fokus unserer Projekte. Nachhaltigkeit, Gesundheit und Wirtschaftlichkeit stellen dabei stets eine untrennbare Einheit dar“, erklärt Edwin Meijerink von DELTA Development den innovativen Ansatz. Mit dem Einzug der Modemarke Levi Strauss wird der Nachhaltigkeitsgedanke der C2C®-Immobilie in die unternehmerische Praxis übertragen. Eine geteilte Wertehaltung war hierfür unerlässlich.

In den Niederlanden hat DELTA mit Immobilien wie dem ABC Square oder dem Fokker Logistics Park in Schiphol bereits zahlreiche nachhaltige Logistik-Großprojekte realisiert – in Deutschland steht der Projektentwickler noch am Anfang.

22.04.2021

Lenzing Group: Sustainability Report 2020

  • Successful measures to fight against the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
  • Implementation of strategic investment projects and climate targets progressing on schedule – launch of first TENCEL™ branded carbon-zero fibers
  • New level of transparency in the textile industry: introduction of blockchain technology
  • Target setting: Lenzing raises the bar even higher and sets new sustainability goals

The Lenzing Group presented its Sustainability Report 2020 on April 22, 2021, World Earth Day. Featuring the title “Stand up for future generations”, Lenzing once again emphasized its commitment to taking responsibility beyond the products it makes.

  • Successful measures to fight against the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
  • Implementation of strategic investment projects and climate targets progressing on schedule – launch of first TENCEL™ branded carbon-zero fibers
  • New level of transparency in the textile industry: introduction of blockchain technology
  • Target setting: Lenzing raises the bar even higher and sets new sustainability goals

The Lenzing Group presented its Sustainability Report 2020 on April 22, 2021, World Earth Day. Featuring the title “Stand up for future generations”, Lenzing once again emphasized its commitment to taking responsibility beyond the products it makes. The non-financial report, prepared in accordance with the reporting standards of the Global Reporting Initiative (GRI) and the Austrian Sustainability and Diversity Improvement Act (NaDiVeG) and reviewed by KPMG Austria GmbH Wirtschaftsprüfungs- und Steuerberatungsgesellschaft, illustrates how the company is responding to the global challenges of our time.

The 2020 financial year of the Lenzing Group was largely dominated by the COVID-19 pandemic. Lenzing took short-term measures to safeguard its business operations and mitigate the effects of fiber prices and fiber demand which came under increasing pressure. The priority was to protect employees and strengthen long-term partnerships with suppliers and customers. Following the current fight against the coronavirus and its consequences, the company continues to move ahead determinedly to achieve its sustainability targets, also against the backdrop of such a difficult market environment.

With the implementation of its science-based targets, the Lenzing Group actively contributes to mastering the problems caused by climate change. In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions by 50 percent per ton of product by 2030. The overriding target is to be climate-neutral by 2050.*

The launch of the first carbon-zero TENCEL™ fibers certified as CarbonNeutral® products in accordance with The CarbonNeutral Protocol – the leading global framework for carbon neutrality – represents another important milestone from the reporting year. As of June 2021, Lenzing will also market the first VEOCEL™ branded lyocell fibers as certified CarbonNeutral® products.

Promoting the circular economy
Lenzing also sets standards for the entire fiber, textile and clothing industry with respect to the circular economy which is of such crucial importance in climate and resource protection. In order to enhance resource efficiency and offer a solution for the global problem of textile waste, the company developed the REFIBRA™ recycling technology. REFIBRA™ is the only technology in the world enabling the production of new lyocell fibers on a commercial scale from cotton scraps derived from manufacturing cotton clothing as well as from used garments. In this way, an important contribution is made to promoting circularity in the textile industry.*

New level of transparency in the textile industry
In addition to environmental protection, the issue of transparency along the supply chain poses a major challenge to the textile industry. Working in cooperation with TextileGenesis™, Lenzing offers an innovative solution to ensure greater transparency on the basis of blockchain technology. Following several successful pilot projects with renowned fashion brands, this digital platform was ultimately launched in 2020 to enable the traceability of textiles, from the fiber to all stages of production and distribution. Thanks to the innovative Fibercoin™ technology of the TextileGenesis™ platform, Lenzing and its partners are able to issue so-called “blockchain assets” in direct proportion to the physical fiber deliveries of the brands TENCEL™ and LENZING™ ECOVERO™. These digital assets function like a “fingerprint” and thus prevent adulteration.*

Target setting: Lenzing raises the bar even higher
The Lenzing Group operates in line with three strategic principles within the context of its “Naturally positive” sustainability strategy: partnering for change, advancing circularity and greening the value chain.*

 

*See attached document for more information..