From the Sector

Reset
130 results
Pasadena Laundry Recertified for Clean Green
Pasadena Laundry Recertified for Clean Green
08.06.2018

Pasadena Laundry Recertified for Clean Green

California Linen Services of Pasadena, Calif. has been recertified Clean Green, reflecting the company’s dedication to standards for operational efficiency and sustainability. The certification quantifies linen, uniform and facility services’ environmentally friendly performance by confirming an operation launders within TRSA-designated water and energy use thresholds; and verifies use of best management practices (BMPs) in line with the ASTM International environmental laundering standard.
 
California Linen Service’s customers can be assured their reusable healthcare textiles are washed, dried and finished with processes that maximize sustainability and reduce greenhouse emissions. Clean Green certified operations demonstrate significant commitment to conservation and green operations through these BMPs:

California Linen Services of Pasadena, Calif. has been recertified Clean Green, reflecting the company’s dedication to standards for operational efficiency and sustainability. The certification quantifies linen, uniform and facility services’ environmentally friendly performance by confirming an operation launders within TRSA-designated water and energy use thresholds; and verifies use of best management practices (BMPs) in line with the ASTM International environmental laundering standard.
 
California Linen Service’s customers can be assured their reusable healthcare textiles are washed, dried and finished with processes that maximize sustainability and reduce greenhouse emissions. Clean Green certified operations demonstrate significant commitment to conservation and green operations through these BMPs:

  • Recovering heat from drained hot water and heat dispersed from the process of warming water
  • Recapturing drained water from rinses for reuse
  • Using environmentally friendly detergents
  • Removing solids and liquids from wastewater
  • Solar energy and energy-efficient lighting
  • Recycling programs
  • Re-routing trucks to save vehicle fuel
  • Spill prevention plans

California Linen Service earned the Clean Green certification initially in 2015. The designation is valid for three years at a time. TRSA inspects laundry facilities seeking certification and approves documentation of their water and energy use and BMP deployment through production reports they submit to auditors during the inspections. TRSA’s certification management protocol includes auditor training by the association’s inspection program administrator.
Clean Green aligns with the ASTM International standard, Guide for Sustainable Laundry Practices, which recognizes key criteria for the certification as universal indicators of maximum sustainability in commercial laundry work. ASTM’s review of TRSA BMPs verified these as the most effective and practical techniques for a laundry to achieve green objectives.
TRSA members prompted development of the standard, which was vetted in the sustainability subcommittee of the ASTM Committee on Textiles. Top technical experts, scientists and environmental professionals from outside the linen, uniform and facility services industry reviewed the BMPs. ASTM is the global leader in developing and delivering voluntary consensus standards unparalleled in building consumer confidence in product and service quality.
 
“I applaud California Linen Services for their ongoing sustainability efforts and maintaining the highest standards in their production and delivery operations,” said Joseph Ricci, TRSA president and CEO. “Meeting all the criteria for certification is not easy, but the company is committed to industry-leading processes and technologies.”

 

Patent Re-examination Board of SIPO upholds Huntsman’s Patents
16.04.2018

Patent Re-examination Board of SIPO upholds Huntsman’s Patents

Huntsman Corporation (NYSE: HUN) is pleased to announce that the Patent Re-examination Board of the State Intellectual Property Office, China (PRB) upheld Huntsman’s Chinese Patents Nos. ZL00106403.7 and ZL200480003051.4.  These patents were contested by Shaoxing Bangyi Chemical Co., Ltd. and Taixing Jinyun Dyestuff Co., Ltd. By its ruling, the PRB rejected the positions of the petitioners and confirmed that Huntsman’s patented technology, which is used in Huntsman’s NOVACRON® Super Black G and NOVACRON® Super Black R dyes, is Huntsman’s valuable innovation for producing deep black shades.

Huntsman Corporation (NYSE: HUN) is pleased to announce that the Patent Re-examination Board of the State Intellectual Property Office, China (PRB) upheld Huntsman’s Chinese Patents Nos. ZL00106403.7 and ZL200480003051.4.  These patents were contested by Shaoxing Bangyi Chemical Co., Ltd. and Taixing Jinyun Dyestuff Co., Ltd. By its ruling, the PRB rejected the positions of the petitioners and confirmed that Huntsman’s patented technology, which is used in Huntsman’s NOVACRON® Super Black G and NOVACRON® Super Black R dyes, is Huntsman’s valuable innovation for producing deep black shades.

Huntsman sued Jiangsu Jinji Industrial Co., Ltd. and Taixing Jinyun Dyestuff Co., Ltd. for infringing the above mentioned Chinese Patents at the Beijing Intellectual Property Court by using Huntsman’s patented technology in six black dyestuff products. Huntsman is seeking substantial damages and an injunction against further infringement.  Huntsman is also seeking substantial damages and an injunction against further infringement in a separate lawsuit against Zhejiang Longsheng Group Co., Ltd., Zhejiang Keyong Chemical Co., Ltd., and Shanghai Colva Dyestuff Industry Co., Ltd. This matter is currently being heard before the High People's Court, Shanghai.  In earlier decisions, both the Shanghai Intermediate People’s Court and the Shanghai High People’s Court ruled that Shanghai Colva Dyestuff Industry Co., Ltd. had infringed Huntsman’s Chinese Patent No. ZL00106403.7 by manufacturing and selling Colvazol Super Black LC-G and Colvazol Super Black LC-R dyes.

Rohit Aggarwal, President of Huntsman Textile Effects said: “We are very pleased with the PRB’s decision which demonstrates the State Intellectual Property Office’s commitment to steadfastly uphold intellectual property rights in China which protect valuable and advanced technology. This encourages companies like Huntsman to continue to invest in research and development in our aim to bring cutting-edge innovation to the textile industry. Huntsman will vigorously pursue those who are infringing our intellectual property rights to stop the unlawful infringement and pursue full compensation for our losses”.

(c) Messe Frankfurt (HK)
05.03.2018

European suppliers at Intertextile Shanghai the go-to option for Chinese buyers seeking quality and style

  • New collaboration of sustainable viscose suppliers formed in China

Digital Printing Zone debuts at Spring Edition
Despite the economic ups and downs in China over the last few years, demand for premium European textiles remains high.
Whether it be premium wool for the flourishing suiting market, ladieswear fabrics, lace & embroidery for high-end domestic brands each with hundreds of stores across the country, innovative yarns & fabrics for the booming sports and activewear sectors, or original pattern designs for the thousands of new online fashion brands, European suppliers remain the go-to option for Chinese buyers looking for quality and style.

  • New collaboration of sustainable viscose suppliers formed in China

Digital Printing Zone debuts at Spring Edition
Despite the economic ups and downs in China over the last few years, demand for premium European textiles remains high.
Whether it be premium wool for the flourishing suiting market, ladieswear fabrics, lace & embroidery for high-end domestic brands each with hundreds of stores across the country, innovative yarns & fabrics for the booming sports and activewear sectors, or original pattern designs for the thousands of new online fashion brands, European suppliers remain the go-to option for Chinese buyers looking for quality and style.

As one of the undisputed leaders in the European textile scene, Italy is always a good bellwether of the trends between Europe and China. After a less than stellar 2016, Italy’s fabric exports to the Mainland China and Hong Kong markets grew by 12.4% in the first 10 months of 2017[1]. The expected demand for European brands at Intertextile Shanghai Apparel Fabrics will be most evident in the SalonEurope zone, which features exhibitors from Austria, France, Germany, Italy, Spain, Switzerland, Turkey and the UK, as well as country pavilions & zones from France, Germany, Italy and Turkey.

There is also continuing demand for overseas expertise when it comes to more technical areas such as sustainability and digital printing, solutions to which can be found in the fair’s All About Sustainability area and Digital Printing Zone.

SalonEurope showcases the continent’s full textile expertise
The best of the best from Europe will be on display in this edition’s SalonEurope, with a range of products across the whole textile spectrum on offer. Some of the highlights this edition include:

  • Alumo (Switzerland): celebrating its 100-year anniversary this July, Alumo has undertaken a complete refresh of their brand, highlighting the character of their mill in Appenzell, Switzerland that has deep roots in the local textile industry. This edition, they will showcase a renewed collection of luxury shirting fabrics with intricate designs and added functions such as natural stretch and wrinkle-free, and a newly enlarged, never-out-of-stock ‘Sartorial’ collection.
  • Hatfil Tekstil Isletmeleri (Turkey): a Turkish-Italian joint venture, they offer a huge range of yarns including eco-friendly options such as organic, BCI and fair trade yarns, as well as cotton, Tencel, Amicor, bamboo, cashmere, modal and other varieties.
  • Hohenstein Textile Testing (Germany): offering testing services, OEKO-TEX® services and certifications, the Hohenstein Quality Label and more.
  • Ricamificio Paolo Italy SpA (Italy): an embroidery manufacturer, they have developed a new technique using very thin embroideries to produce a lace-like effect, which can also be customised to the customer’s requirements in no more than four weeks. They have also produced a quilt-like fabric suitable for spring / summer garments which is made from materials such as silk organdie, cotton yarn or lurex to produce a shiny effect.
  • Teseo Tessitura Serica Di Olmeda SpA (Italy): for their summer 2019 collection, Teseo is inspired by the natural elements with increased attention to sustainability with GOTS-certified bio silk and eco-friendly yarns. New articles are lighter and enriched with yarn-dyes, include jacquard stripes and checks, gauze and devoré bands to add transparency, and more.

New collaboration of sustainable viscose suppliers formed in China
While the textile industry in China still has a long way to go in terms of sustainability, genuine progress is being made at both a government and company level. January of this year saw the implementation of a new environment protection tax, with companies charged for noise, air & water pollution and generating solid waste[2]. Replacing a pollutant discharge fee that had been in place for 40 years, the new tax is set by local governments – with some of the regions suffering from worse pollution setting higher rates – and also incentivises companies with lower emissions.

In another encouraging move, 10 leading global viscose producers in China have come together to form the Collaboration for Sustainable Development of Viscose (CV) to promote the sustainable sourcing and responsible production of viscose. These 10 producers collectively account for over 50% of the world’s viscose staple fibre production, and have partnered with two trade associations to adopt a sustainability roadmap for the viscose industry. Built around credible international sustainability standards and programmes, the CV Roadmap aims to provide guidance to viscose producers on sustainable sourcing and production practices.

The CV collaboration will make its debut appearance in the fair’s All About Sustainability zone, where visitors can learn more about this initiative, as well as sustainable developments in the Chinese textile industry. Apart from an educational programme and garment display area, the zone will also feature a number of exhibitors other than CV.

Digital Printing Zone debuts at Spring Edition
While digital printing is rapidly gaining traction in the global textile industry, this is especially so in China due to its potential to reduce pollution during the production process. Amongst the exhibitors looking to take advantage of this in the fair’s new Digital Printing Zone is MS Italy, a market leader in the design, development and distribution of innovative digital ink-jet printing systems and associated consumables, which serves the high-end, roll-to-roll textile printing and specialty material markets. Also exhibiting is DIGITEX which will introduce the latest digital- and inkjet-printed natural and manmade fabrics.

Apart from digital printing exhibitors, a day-long forum will inform fairgoers on the exciting possibilities of digital printing. Held on day 2 of the fair, the Fast Fashion and Digital Printing Application Forum features sessions on fast fashion technology & trends and digital printing applications. These are followed by a series of discussions on topics such as flexible supply chains, business opportunities created by digital printing and IP protection. The forum also includes a presentation on the findings of a six-month study conducted by Fashion Print, a Chinese publication, for which they visited hundreds of textile companies, printing and dyeing enterprises, as well as their suppliers to produce a research paper on the digital textile printing market and technology.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

  • Intertextile Shanghai Apparel Fabrics – Spring Edition 2018 is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. For more details on this fair, please visit: www.intertextileapparel.com. To find out more about all Messe Frankfurt textile fairs worldwide, please visit: www.texpertise-network.com.

[1] http://hk.fashionnetwork.com/news/Italian-textile-industry-back-on-growth-track-in-2017,944760.html
[2] http://www.fibre2fashion.com/news/textile-news/china-imposes-environment-protection-tax-beginning-jan-1-239965-newsdetails.html

 

Source:

Liam Rodden, Messe Frankfurt (HK)

26.02.2018

Hexcel’s Product Innovations for Aerospace, Automotive, Wind Energy and Marine at JEC WORLD 2018

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

Among the Aerospace promotions at Hexcel’s booth are carbon-reinforced 3D printed parts, made from Hexcel’s HexAM™ additive manufacturing technology that uses PEKK ultra-high performance polymers. Hexcel acquired this technology from Oxford Performance Materials in December 2017 to provide a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Aircraft engines benefit from a number of Hexcel technologies that will be promoted at JEC 2018, including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.
Another honeycomb innovation from Hexcel is Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs. An example of this technology will be on display at JEC 2018.

Rounding off the aircraft engine exhibits is a CTi fan blade for new generation lightweight turbofan engines from Rolls-Royce, manufactured from Hexcel’s HexPly® M91 high toughness and impact-resistant epoxy prepreg. Hexcel supplies HexPly® M91 as slit tape for the automated lay-up of the complex aerodynamic shape, with a constantly changing thickness across the blade length. The blade which is thinner and lighter than titanium fan blades is currently undergoing flight tests.
Hexcel’s HiTape® and HiMax™ dry carbon reinforcements that were developed for the automated lay-up of preforms for resin-infused aerospace structures will be promoted at the show. Two demonstrator parts, one made with HiMax™ and one with HiTape®, were both infused with HexFlow® RTM6 resin to demonstrate the potential benefits of an integrated design for aircraft skins, spars and stiffeners that meets OEM requirements for production rate increases and cost effectiveness.

Hexcel is also introducing its new range of HiFlow™ advanced liquid resins for aerospace structures manufactured by liquid molding technologies. Based on novel proprietary chemistry, the new resin family will enhance the performance of composites and ease processing when combined with HiTape® and HiMax™ dry carbon reinforcements. HiFlow™ HF610 is the first resin in the range.
Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil last October. Hexcel is relaunching the acquired products under the new HexBond™ brand name at JEC World. This fast-growing range of pastes, liquid shim and film adhesives has a wide spectrum of operating temperatures and is in qualification with a large number of aerospace and industrial OEMs.
In the Planet Aerospace area at JEC, Daher and Hexcel will jointly display an aircraft spar manufactured from HexPly® M56 prepreg. Hexcel’s Neil Parker and Daher R&T Director Dominique Bailly will give a joint presentation focusing on the materials used and the benefits for the finished part. The aircraft spar was designed and manufactured by Daher using Hexcel’s HexPly® M56 prepreg, in slit tape format, that was developed for automated deposition and out-of-autoclave curing. The spar was manufactured using only the vacuum bag process and demonstrates very low porosity levels. It is currently undergoing testing and validation through CORAC funding.

Hexcel’s Automotive promotions at JEC World 2018 include a new prepreg for composite leaf springs, HexPly® M901. In contrast to steel leaf springs used for suspension on vans, trucks and SUVs, newer composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. Hexcel’s HexPly® M901 prepreg raises the bar further, reducing mold cure time below 15 minutes, a 50% reduction compared to standard industrial prepregs. HexPly® M901 provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure. Hexcel’s expertise in manufacturing heavy weight glass UD prepregs, with fiber areal weights of up to 1600gsm, allows the company to offer a highly cost-competitive solution for the rapid manufacture of these safety critical components.

Hexcel is constantly seeking ways to ensure that customers obtain the maximum benefit from composites and has recently acquired state-of-the-art simulation technology that accurately predicts how HiMax™ non-crimp fabrics will drape in a mold. Working in collaboration with Nottingham University Hexcel has created a car seat shell, for which the material selection was optimized using this new drape simulation technology. Visitors to Hexcel’s stand at JEC will see an on-screen demonstration that illustrates how the simulation tool operates, predicting process and performance and ensuring that the optimum fabric architecture is quickly identified, reducing the need for expensive trial programs.
Hexcel’s HexMC®-i 2000 carbon fiber/epoxy molding compound has been successfully used by Audi to manufacture a high-performance engine cross brace. HexMC®-i is a fast curing high-performance molding material, suitable for the series production of complex shaped parts and providing excellent mechanical properties. The Audi cross brace covers the engine, providing torsional stiffness for enhanced drive dynamics.

Hexcel’s product offering for customers in the Marine industry has expanded following the acquisition of Formax in 2016 and Structil in 2017. At JEC World, Hexcel will promote its enhanced portfolio of carbon fibers, prepregs, woven reinforcements and multiaxial fabrics for builders of racing catamarans and luxury yachts.
Marine customers have supplied a number of parts for display to illustrate their expertise in manufacturing composite structures from Hexcel materials. These include part of a Diam 24 yacht mast made by ADH Inotec from Hexcel’s HexPly® M79 fast curing, low temperature cure prepreg. ADH Inotec purchased the prepreg from Composites Distribution, a Hexcel Official Distributor that also supplied HexPly® M9.6 prepreg to Lorima for the Outremer 5X catamaran mast section on display. Part of Lorima’s 42m wing mast for a multihull racing boat made with HexPly® prepreg from Vert-Le-Petit (formerly Structil) will complete the marine display.

Hexcel’s innovations for Wind Energy include Polyspeed® pultruded laminates for load-carrying elements in wind blades. These continuous cross-section profiles, made from a polyurethane matrix reinforced with unidirectional carbon fiber, provide consistently high mechanical properties, including high stiffness, fracture toughness and shear strength, combined with low weight and durability. Visitors to Hexcel’s stand will see a 2m diameter coil of pultruded carbon laminate that contains 255m of material in a single roll. This technology offers an economical way of reinforcing large-scale composite structures such as wind turbine blades. Hexcel will also launch its surface finishing prepreg for wind turbine blades and components. This provides a tough, durable and ready-to-paint blade surface without the use of gel coat and results in faster blade manufacture, saving time in production and reducing material costs. The benefits of the new surfacing prepreg will be demonstrated via a wind blade exhibit that has been given four different treatments across the blade surface. These include a section with gel coat, a section of standard prepreg without gel coat, and a section where a fleece has been added to improve surface quality but still requires preparation before painting due to pin holes. The final section made with new HexPly® XF2P surfacing prepreg has a ready-to-paint surface, straight from the mold, without any requirement for gel coat, fleece or finishing operations.

More information:
Hexcel JEC World 2018 Aircraft
Source:

Dorothée DAVID & Marion RISCH, AGENCE APOCOPE

Intertextile Shanghai, Taiwan Pavillion (c) Messe Frankfurt
26.02.2018

Largest range of exhibitors from Asia awaits at Intertextile Shanghai Apparel Fabrics

For buyers that prioritise having the widest range of sourcing options in one place, their best bet is March’s Intertextile Shanghai Apparel Fabrics. Boasting pavilions from Japan, Korea, Pakistan and Taiwan, individual exhibitors from Hong Kong, India, Indonesia and Vietnam, not to mention 2,800-plus Chinese exhibitors, the fair is the largest gathering of Asian suppliers under one roof for the spring / summer sourcing season. To ensure convenience for buyers, international exhibitors are grouped by country or region, while Chinese exhibitors are located in product halls including fabrics for casualwear, functional wear / sportswear, ladieswear, lingerie & swimwear, shirting and suiting, as well as for accessories and denim.

In total, around 3,300 exhibitors will showcase their apparel fabrics and accessories at the fair, with the SalonEurope zone hosting premium suppliers from Europe – including pavilions and zones from France, Germany, Italy and Turkey – while the International Hall also houses other overseas exhibitors from the likes of Argentina, Australia, Peru the US and elsewhere.

For buyers that prioritise having the widest range of sourcing options in one place, their best bet is March’s Intertextile Shanghai Apparel Fabrics. Boasting pavilions from Japan, Korea, Pakistan and Taiwan, individual exhibitors from Hong Kong, India, Indonesia and Vietnam, not to mention 2,800-plus Chinese exhibitors, the fair is the largest gathering of Asian suppliers under one roof for the spring / summer sourcing season. To ensure convenience for buyers, international exhibitors are grouped by country or region, while Chinese exhibitors are located in product halls including fabrics for casualwear, functional wear / sportswear, ladieswear, lingerie & swimwear, shirting and suiting, as well as for accessories and denim.

In total, around 3,300 exhibitors will showcase their apparel fabrics and accessories at the fair, with the SalonEurope zone hosting premium suppliers from Europe – including pavilions and zones from France, Germany, Italy and Turkey – while the International Hall also houses other overseas exhibitors from the likes of Argentina, Australia, Peru the US and elsewhere.

Japan Pavilion keeps ‘Banshu-Ori’ tradition alive
Organised by the Japan Fashion Week Organization (JFW), the Japan Pavilion will house 22 exhibitors and also feature a Japan Trend Corner. After the immense popularity of this pavilion with buyers in previous editions, the organisers are in a good position to comment on the trends in the local market. “The now mature Chinese market tends to seek out very different types of products and purchase in smaller batches, which is a world away from the mass-production focus of the past,” JFW commented.

Included in this edition’s Japan Pavilion are three companies from the Nishiwaki region, which is famous for its ‘Banshu-Ori’, or Banshu weave. Banshu-Ori is a yarn-dyed fabric, woven into various patterns, such as checks and stripes, with yarns that are dyed before being woven by weaving machines. This tradition dates back to 1792, and will be showcased by Bon Co Ltd, Ueyama Orimono Corp and Kuwamura Co Ltd at the fair. Bon will showcase a range of new products using this traditional technique, including organic cotton fabrics, paper yarn fabrics and indigo items. Ueyama Orimono, which boasts Japan’s largest dyeing factory in Nishiwaki, designs its own fabrics in Tokyo, and will present cotton, cotton / linen and medium-thin yarn-dyed fabrics at the fair. Kuwamura will showcase fabrics based on 100% yarn-dyed cotton, as well as cotton and cotton-blend materials.

Taiwan Pavilion the place to find innovation
The Taiwan Pavilion, with over 40 participating companies, is a guaranteed source of innovation at the fair, with a number of exhibitors also offering eco-friendly options. Some of the highlights include:

  • Keen Ching Industrial: they will have a number of their patented KCC-branded zippers at the fair including a durable double-coil zipper, an invisible zipper with a movable retainer box, a track type water-repellent zipper, a curved metal zipper and more.
  • Handseltex Industrial: will showcase a wide range of products including lace, jacquard and mesh, made with the likes of organic cotton and recycled polyester with an eco-friendly production process.
  • Paltex: the company’s ‘From Waste to Yarn’ regeneration system involves turning waste fishing nets and plastic bottles from the ocean into polyester and nylon fabrics, membranes and trimmings.
  • Superwill: their unique gradient fabric combines specialty yarns and a special knitting process, and features a thickness that decreases from top to bottom. This design allows the fabric to be tailored to different garments.
  • Tri Ocean Textile: will feature its own DreamFel® high-performance filament polypropylene yarn which is lightweight, durable and environmentally friendly, and used in sports & outdoor apparel and outdoor furniture.

The Taiwan Pavilion will be full of innovative textile solutions again this edition
The Korea and Pakistan Pavilions round out the Asian offerings. Nearly 60 Korean exhibitors will showcase predominantly manmade, fancy, knitted, acetate woven, tricot, jacquard, faux leather and printed fabrics, as well as lace and embroidery, for ladieswear, while other members will feature fabrics for sportswear and outdoor wear. Those from Pakistan, meanwhile, will feature in the Beyond Denim hall and offer a wide range of denim products.  

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

Source:

Messe Frankfurt

09.02.2018

TRSA Donates $80,000 Toward Hurricane Relief from Proceeds of Cancelled Annual Conference

TRSA, the global association for the linen, uniform and facility services industry, has donated approximately $80,000 to Anayat House, Children of Restaurant Employees (CORE) and ConPRmetidos: organizations assisting those impacted by hurricanes in Florida, Texas and Puerto Rico.

The donations are the result of TRSA’s 105th Annual Conference, which had been scheduled for last September in Miami, but was cancelled due to Hurricane Irma. While offering to refund all registration and sponsorship fees, TRSA asked members to donate all or a portion of those fees to support local charities.

“We’re very proud of the TRSA community, which was able to create some positive outcomes in an overwhelmingly tragic circumstance,” said Joseph Ricci, CEO of TRSA.

TRSA, the global association for the linen, uniform and facility services industry, has donated approximately $80,000 to Anayat House, Children of Restaurant Employees (CORE) and ConPRmetidos: organizations assisting those impacted by hurricanes in Florida, Texas and Puerto Rico.

The donations are the result of TRSA’s 105th Annual Conference, which had been scheduled for last September in Miami, but was cancelled due to Hurricane Irma. While offering to refund all registration and sponsorship fees, TRSA asked members to donate all or a portion of those fees to support local charities.

“We’re very proud of the TRSA community, which was able to create some positive outcomes in an overwhelmingly tragic circumstance,” said Joseph Ricci, CEO of TRSA.

"The contribution from TRSA will directly assist low income families and the elderly who seek overnight accommodations during a medical crisis,” said Tressa Clarke, Executive Director of Anayat House, which provides affordable overnight accommodations for family members of patients at local Beaumont, TX, hospitals and anyone traveling to Beaumont for medical care and outpatient treatment. “This contribution will help bridge the gap between the suggested donation of $20 and the actual cost of $90 per room.”

CORE, an organization that is part of the Florida Restaurant & Lodging Association, grants support to children of food and beverage service employees navigating life-altering circumstances. "CORE was incredibly grateful to receive the generous donation from TRSA," said Lauren LaViola, executive director of CORE.  “The donation to CORE will help to fulfill grants for qualifying children of food and beverage service employees navigating life-altering circumstances."

“I feel truly inspired by TRSA’s continued commitment to the support of our industry’s community of families. It is an honor and a privilege to be part of such great association,” said Pablo Lucchesi, Managing Partner of Crown Linen, in whose name TRSA made the CORE contribution.

An additional contribution was made to ConPRmetidos, an organization that specializes in matching Puerto Rico’s “diaspora” – people who settle away from their ancestral homeland – with companies there to help them grow.

“We don’t have words to say thanks for all your generosity,” said Michael Shulevitz, President of Cadillac Uniform & Linen Supply in Puerto Rico. “Thank you for helping Puerto Rico to rise up again.”

The $80,000 donation follows an immediate TRSA charitable effort that took place just after the conference, when several hundred homeless residents were given welcome boxes that had been packaged for conference attendees at the time of the cancellation.

More information:
TRSA
Source:

TRSA®
Ken Koepper, Director of Marketing/PR

Messe Frankfurt
26.01.2018

Intertextile Shanghai Apparel Fabrics’ Spring / Summer 2019 trends

The need for real dialogue becomes ever more crucial
Amid reconstruction, the world is facing severe realities. In the midst of political disorder, environmental problems, and social scandals, how do we seek the light within the darkness of chaos? As societies become inundated with global waves of conflicting news, the need for real dialogue becomes ever more crucial. Personal interaction is irreplaceable – communicating with nature, reading the signs, and sensing the wind. Creating emotional connections with others and opening the mind to rationality. Now is the time to solidify core values with responsibility and identify key essences of life.

The need for real dialogue becomes ever more crucial
Amid reconstruction, the world is facing severe realities. In the midst of political disorder, environmental problems, and social scandals, how do we seek the light within the darkness of chaos? As societies become inundated with global waves of conflicting news, the need for real dialogue becomes ever more crucial. Personal interaction is irreplaceable – communicating with nature, reading the signs, and sensing the wind. Creating emotional connections with others and opening the mind to rationality. Now is the time to solidify core values with responsibility and identify key essences of life.

The view from a fashion perspective: toughness and resilience
How will fashion respond to these ever-changing turbulent times? Will fashion allow other elements to penetrate our lives whilst innumerable other issues make their presence felt? Fashion is meant to console, to provide a retreat during unpredictable times. At its core, fashion represents unhindered confidence and allows us to freely express ourselves. Let us address how to best confront negative forces through fashion and mindful resilience.

Intertextile Directions Spring / Summer 2019 Trend Forum
Developed by renowned trend experts from Tokyo, New York, Milan and Paris, the Intertextile Directions Trend Forum will present three trends for Spring / Summer 2019 under the overall theme ‘Dialogue’: @ sense, # couture and e. native. Exhibitors’ fabrics will illustrate the colour, fabric and print styles of each trend.

Overall colour trends
This season witnesses an enriched palette, encapsulating a refined and premium feel. Refreshing and vivid colours introduce a sense of vitality and elicit creativity.

As well as the international trends for Spring / Summer 2019, three Fabrics China Trend Forums will illustrate the domestic trends for ladieswear and menswear, as well as a ‘Fashion Focus’ area. A number of seminars will also be held to give more insight into the S/S 19 trends.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

More information:
Intertextile Shanghai
Source:

Messe Frankfurt

Logo PREMIUM GROUP (c) PREMIUM GROUP
Logo PREMIUM GROUP
24.01.2018

PREMIUM GROUP – Final Report 

Die PREMIUM GROUP ist Veranstalter der internationalen Modemessen PREMIUM, SHOW&ORDER, SEEK, BRIGHT und PREMIUM ORDER MUNICH sowie der Innovationskonferenz FASHIONTECH. Mit diesen Events positioniert sich die PREMIUM GROUP als führender Veranstalter und als Innovationsspitze innerhalb der europäischen Messelandschaft.

Die PREMIUM GROUP ist Veranstalter der internationalen Modemessen PREMIUM, SHOW&ORDER, SEEK, BRIGHT und PREMIUM ORDER MUNICH sowie der Innovationskonferenz FASHIONTECH. Mit diesen Events positioniert sich die PREMIUM GROUP als führender Veranstalter und als Innovationsspitze innerhalb der europäischen Messelandschaft.

­„Das war ein guter Saisonstart für uns. Alle Messeformate und Events sind sehr gut besprochen und besucht worden. Die Zusammenlegung von PREMIUM und SHOW&ORDER war richtig und wichtig. Der Fokus auf die Experiences, die auf allen Plattformen umgesetzt wurden, kam sehr gut an. Viele Brands haben richtigerweise in den Standbau und in das Storytelling investiert, um ihre Marken und Kollektionen zu emotionalisieren, und davon vor Ort profitiert. Die SEEK wurde unterm Strich als die coolste Plattform bewertet, die den Zeitgeist am treffendsten abbildet. Die Stimmung war aufgeladen, der Style der Community progressiv und jung, Berlin-like. Auffallend jung ist auch die neue Generation der Besucher in der Arena. Was uns freut, ist der Erfolg des European Skateboard Awards mit der BRIGHT, moderiert von der amerikanischen YouTube-Ikone Gary Rogers (Skateline). Das Publikum kam aus der ganzen Welt und den Brandaward hat dieses Mal Palace gewonnen – mit Abstand eine der gefragtesten Marken im Bereich Urban- und Streetwear. Wir blicken auf drei Tage erfolgreiches Messebusiness zurück und sind zufrieden mit der Frequenz und vor allem mit der Qualität der Besucher. Die Anzahl der Besucher lag etwas höher als in der Sommersaison und entspricht ungefähr der Anzahl der vergangenen Wintersaison. Auf allen Events liegt der Fokus nach wie vor auf Business, Community, Kommunikation, Emotion und Inspiration. 

Das geballte Angebot lieferte den Retailern ideale Voraussetzungen, die Trends, die wir in den verschiedenen Hallen definieren, zu sichten und für ihre Sortimente zu ordern. 
Mit dem Umzug ins Kraftwerk und der Partnerschaft mit der Messe Frankfurt wurde das erfolgreiche Konzept der FASHIONTECH mit der FASHIONSUSTAIN um einen weiteren Tag ergänzt. An beiden Tagen war die Konferenz ganztägig voll besetzt. Damit hat sich das Kraftwerk als Innovation & Future Hub während der Fashion Week etabliert.“

Source:

PREMIUM Exhibitions GmbH

 

Pop- up Shop Pop-up Shop
Pop-up Shop
25.06.2017

All-White Everything at SEEK’S SUPER NATURAL POP-UP SHOP

Vom 4. bis 8. Juli 2017 bringt die SEEK zur Fashion Week einen Pop-up-Shop auf die Straße. Die SEEK transformiert den Hotspot Fechtner Delikatessen – bekannt für ein umfassend gesundes Food-Angebot bestehend aus regionalen Produkten höchster Qualität – in ein Retail-Konzept. Fashion In- und Outsider finden hier zusammen, um zu inspirieren und sich inspirieren zu lassen. Die Berliner Torstraße, wo das erste Pop-up-Format der SEEK aufschlägt, ist ein Zentrum der Offenheit, Inspiration und Individualität. Die SEEK als offizielle ‚voice of street culture’ begibt sich mitten hinein ins Leben.
Marke, Einkäufer, Presse, Konsumenten – die Grenzen verschwimmen von Saison zu Saison mehr. Als zeitgemäße Antwort auf die Herausforderungen des Handels präsentiert der Shop eine kuratierte Auswahl von Mode, Food und Lifestyle. Mehr noch: Der Einkauf wird zum Erlebnis, indem ein Konzept entsteht, an dem jeder teilhaben will, und das jeder teilen möchte.

Vom 4. bis 8. Juli 2017 bringt die SEEK zur Fashion Week einen Pop-up-Shop auf die Straße. Die SEEK transformiert den Hotspot Fechtner Delikatessen – bekannt für ein umfassend gesundes Food-Angebot bestehend aus regionalen Produkten höchster Qualität – in ein Retail-Konzept. Fashion In- und Outsider finden hier zusammen, um zu inspirieren und sich inspirieren zu lassen. Die Berliner Torstraße, wo das erste Pop-up-Format der SEEK aufschlägt, ist ein Zentrum der Offenheit, Inspiration und Individualität. Die SEEK als offizielle ‚voice of street culture’ begibt sich mitten hinein ins Leben.
Marke, Einkäufer, Presse, Konsumenten – die Grenzen verschwimmen von Saison zu Saison mehr. Als zeitgemäße Antwort auf die Herausforderungen des Handels präsentiert der Shop eine kuratierte Auswahl von Mode, Food und Lifestyle. Mehr noch: Der Einkauf wird zum Erlebnis, indem ein Konzept entsteht, an dem jeder teilhaben will, und das jeder teilen möchte.
Das Konzept Super Natural ist gleichermaßen das Dachthema der sechsten Ausgabe des SEEK Magazines. Im Pop-up-Shop werden ausschließlich weiße Produkte angeboten, in einem klaren und auf das Wesentliche reduzierten Umfeld. Am 3. Juli wird dann zum Launch der aktuellen Printausgabe in den Pop-up-Shop eingeladen.
Super Natural ist in Zusammenarbeit mit Daniel Padilla Werner (Brand & Retail Consultant/Buyer Denim & Urban bei der KaDeWe Group) entstanden.

More information:
Fashion Week, Pop-up, Natur
Source:

PREMIUM Exhibitions GmbH

Intertextile Pavillion Shenzhen Source: www.intertextileapparel.com
Intertextile Pavillion Shenzhen
06.06.2017

Top brand buyers sign-up to attend Intertextile Pavilion Shenzhen 2017

As the product development process in the apparel industry continues to speed up, producers are looking for new fabric and accessory options outside of the traditional sourcing seasons. As such, with its added advantage of being located in the core area of China’s fashion industry and nearby Hong Kong, the popularity and importance of July’s Intertextile Pavilion Shenzhen has been growing within the apparel market in recent years. A number of renowned international and domestic brands, such as DKNY, Embry, FILA, Initial, Nine West Group, Peacebird, s.Oliver and many more, have already signed-up to attend this year’s fair, where they will source from around nearly 700 exhibitors.

As the product development process in the apparel industry continues to speed up, producers are looking for new fabric and accessory options outside of the traditional sourcing seasons. As such, with its added advantage of being located in the core area of China’s fashion industry and nearby Hong Kong, the popularity and importance of July’s Intertextile Pavilion Shenzhen has been growing within the apparel market in recent years. A number of renowned international and domestic brands, such as DKNY, Embry, FILA, Initial, Nine West Group, Peacebird, s.Oliver and many more, have already signed-up to attend this year’s fair, where they will source from around nearly 700 exhibitors.


“Once again this edition we are putting significant effort into inviting VIP buyers and matching them with our exhibitors, so we know that many key brand buyers will source at the fair again,” said Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd. “Last year the feedback from these buyers, such as Diesel, DKNY, KINJI and Marc O’Polo, was that they are consistently seeking new materials to develop new products throughout the entire year, therefore, they find Intertextile Pavilion Shenzhen increasingly beneficial to them, particularly because of its timing and high quality of products.”
One buyer already confirmed to attend, DKNY, sent its Fabric Manager Mr Patrick Chan to visit the fair last year, who praised the experience after his trip. “I’m satisfied with the quality of the suppliers and their products. I’ve found some potential suppliers in the Fine Japan Zone and received some samples. They provide high-quality fabrics with good design,” he said.

Source:

Messe Frankfurt