From the Sector

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

In the marine sector, the demands placed on textiles are not only high in terms of fire protection, but also with regards to light resistance and durability. This is particularly true for textiles used in outdoor applications. These must be extremely robust, as they are exposed to moisture and sunlight. To meet these requirements, Trevira CS has launched a range of 30 new spun-dyed, UV-stable filament yarns. Besides color depth and durability, spun-dyed yarns offer another advantage: They are more sustainable because the fabrics made from them can be produced in a more environmentally friendly way than textiles that are dyed in one piece or consist of brightly colored yarns. In fabric production, a large share of resource consumption goes to the dyeing and finishing of fabrics as well as the use of chemicals and water. However, with spun-dyed yarns, these processing steps are unnecessary – the yarn immediately comes out of the spinneret in the desired color, reducing the products’ environmental impact.

The topic of sustainability is also taken up in other Trevira CS products. For example, Trevira CS fabrics are available in recycled versions. They consist of fiber and filament yarns obtained in different recycling processes. Filament yarns are produced using recycled PET bottles, they contain 50% post-consumer recycled material. Recycled fibers are obtained using an agglomeration plant and in further processing steps from residual pre-consumer waste from production. They consist of 100% recycled material (pre-consumer recycling). All flame retardant recycled Trevira® products are GRS (Global Recycled Standard) certified.
Fabrics made from these yarns are marked with the Trevira CS eco trademark. The prerequisite for this is a recycled content of at least 50%. Among the fabrics presented at the Trevira CS trade fair stand are 8 fabrics bearing the Trevira CS eco brand.

The long-term goal in developing sustainable products is undoubtedly to enter a circular economy. For this new path, an innovative Trevira CS product development was launched, producing flame retardant fibers and filament yarns from chemically recycled raw material. In this case, the basic raw material for the chemical recycling was PET bottles, but essentially it could be most any other PET recyclables, such as packaging material or even textiles. Chemical recycling involves depolymerization, a sequence of chemical reactions in which the polymer chains are broken down again into their original components, i. e. the monomers. In a further processing step, impurities are removed. Before the polymerization process is initiated, a small amount of MEG (mono ethylene glycol) is added.

The same technology used to produce the original (virgin) raw material for Trevira CS is also used here. The flame retardant modification is added during polymerization. In this way, the flame retardant properties are indelibly anchored in the polymer.

By recycling valuable materials such as packaging material, waste can be avoided. The raw material obtained from the recycling process is comparable to the original material can be used again in high-quality products.

Carbios will receive grants totaling €54 million from French State via France 2030 and Grand-Est Region to finance construction of world’s first PET biorecycling plant and accelerate R&D activities

Carbios announces that its project has been selected by the French State for funding of €30 million from the French State as part of the investment plan France 2030, and €12.5 million from the Grand-Est Region.  The implementation of this funding is conditional to the European Commission’s approval of the corresponding state aid scheme, followed by the conclusion of national aid agreements. As part of the national call for projects on “Plastics Recycling” operated by ADEME^[1], Carbios’ project to finalize the industrialization of its unique PET biorecycling process has been selected. The reference plant in Longlaville in the Grand-Est region will be the world’s first PET biorecycling plant and is due for commissioning in 2025. This plant will make it possible to relocate to France the production of the two basic components of PET, PTA and MEG^[2], both derived from the Carbios process.

Carbios also announces that it has been granted total funding of €11.4 million from the French State as part of France 2030, of which €8.2 million directly for Carbios (€5 million in repayable advances) and €3.2 million for its academic partners INRAE^[3], INSA^[4] and CNRS^[5] via the TWB^[6] and TBI^[7] joint service and research units. This funding will enable to continue its research into the optimization and continuous improvement of Carbios’ enzymatic technologies.

The plant will secure the sales of the first volumes of recycled PET produced with Carbios’ technology, and to offer its partners recycled PET of the same quality as virgin PET. Once the necessary permits have been obtained, which should be granted by the end of 2023, in line with the announced start of construction before the end of the year, the plant is scheduled to be commissioned in 2025. This will be followed by a period of ramp-up to full capacity. The plant will have a nominal processing capacity of 50,000 tonnes of PET waste per year, equivalent to 2 billion bottles or 2.5 billion food trays.

Selection for funding by the French State through France 2030 and the Grand-Est Region complements the recent announcement of an exclusive, long-term partnership with Novozymes^[8], a leader in enzyme production, one of the main aims is to ensure the supply of enzymes to Carbios’ Longlaville plant and future licensed plants. In addition, Carbios recently secured a first supply source for its future plant by winning part of the CITEO tender for the biorecycling of multilayer trays^[9].

^[1] The French Agency for Ecological Transition
^[2] PTA = purified terephthalic acid; MEG = monoethylene glycol
^[3] French National Research Institute for Agriculture, Food and the Environment
^[4] French National Institute of Applied Sciences
^[5] French National Center for Scientific Research
^[6] Toulouse White Biotechnology – UMS INRAE 1337 / UAR CNRS 3582
^[7] Toulouse Biotechnology Institute – UMR INSA/CNRS 5504 / UMR INSA/INRAE 792
^[8] Cf. press release dated 12 January 2023
^[9] Cf. press release published by Citeo dated 26 April 2023

Manfred Hackl, CEO of EREMA Group GmbH, was recently awarded the accolade Plastics Recycling Ambassador of the Year at the Plastics Recycling Show Europe. The award is given in honour of personalities who are particularly committed to plastics recycling.
 
Manfred Hackl has been with EREMA since 1995 and, prior to joining the management team, was responsible for the product development and market launch of VACUREMA technology that closed the loop in the bottle-to-bottle segment efficiently and cost effectively. In his current role as CEO of the EREMA Group and in various roles in well-known national and international associations he promotes plastics recycling and circular economy across the industry, regionally and throughout Europe - especially at EU level - encouraging everybody in the industry to work together.

"I dedicate the Recycling Ambassador of the Year award to the employees at the EREMA Group. This year we are celebrating our 40th anniversary, and this award, just like the many we have received for our technologies over the years, shows that we can be very proud of what we have accomplished and achieved together during this time," says Manfred Hackl, delighted with the award. In the past business year 2022/23 alone, the extruders supplied by the companies within the EREMA Group deliver an additional 1.6 million tonnes of recycling capacity.

International technology group ANDRITZ entered a partnership with Pellenc ST and Nouvelles Fibres Textiles to set up the very first industrial-scale automatic textile sorting line in France combining automated sorting and recycling technology.

The partners have expert knowledge in sorting technologies (Pellenc ST), textile machinery and processes (ANDRITZ), as well as post-consumer textile value chains from sorting to manufacturing (Nouvelles Fibres Textiles newly founded by Les Tissages de Charlieu and Synergies TLC).

The new textile sorting line being built is the first to combine Pellenc ST's automated sorting technologies with ANDRITZ’s recycling technologies. It will process post-consumer textile wastes to produce recycled fiber engineered for the spinning, nonwoven and composite industries. Starting operations in mid-2023, it will serve as a production line for Nouvelles Fibres Textiles, as an R&D line for the three partners, and as a test and demonstration center for their customers.

Nouvelles Fibres Textiles aims to become a reference in both industrial grade material production and industrial scale post-consumer textile sorting, thanks to innovative technologies with hard point removal providing pure fibers, selective colors, and differentiated fiber types.

Nouvelles Fibres Textiles’ partners also work closely together in R&D at the ANDRITZ Laroche and Pellenc ST technical centers to keep pushing technical boundaries.

Around EUR 355 million in overall turnover, 350 extruders delivered creating an additional recycling capacity for 1.6 million tons of recycled pellets as a result - these are the figures with which the EREMA Group was able to close the 2022/23 financial year in March.

"With demand for recycled plastics remaining high, the past financial year brought many challenges that we needed to handle," says Manfred Hackl, CEO of EREMA Group GmbH. The challenges included persistent delays in the supply chain and unexpected supplier outages. Logistics and production processes had to be adapted several times as a result. The situation has improved significantly meantime as a result of these measures and more stable supply chains.

The production locations in Austria manufactured 270 extruders and delivered them to customers around the globe. Taking the whole group into consideration, this figure rises to 350 including the extruders from PLASMAC, the Italian subsidiary. The recycled pellet production capacity of all extrusion systems delivered in financial year 2022/23 adds up to around 1.6 million tonnes per year. On top of that there are around 130 additional components and modules such as filter systems and ReFresher anti-odour units.

Recycling innovations for high-quality pellets
K 2022 - the highlight trade fair of the past financial year - saw the EREMA Group launch seven
new recycling systems and components. These included the new INTAREMA® TVEplus® DuaFil® Compact recycling system and the EcoGentle® plasticising unit, which was also newly developed. Thanks to their gentle polymer treatment and significantly lower melt temperature, both extrusion innovations deliver effective advantages in terms of the quality of the melt, recycled pellets, and final product, as well as impressive energy efficiency in post consumer and PET recycling applications. The significance of these innovations for plastics recycling is underlined by the nomination of the DuaFil® Compact technology for one of this year's Plastics Recycling Awards Europe in the category Recycling Machinery Innovation of the Year.
The same applies to the READYMAC 1109 TVE machine made to stock by EREMA Group subsidiary UMAC, as well as to the new ALPHA XS edge trim recycling machine for the inhouse recycling segment made by PLASMAC. The market launch of the deinking system presented at K 2022 by the EREMA Group company KEYCYCLE delivering a throughput of 1,200 kilograms per hour has been a success, as has the commissioning of a further unit sold to a film manufacturer.

40 years of EREMA
The beginning of the new financial year falls almost to the day on EREMA's 40th anniversary. On 14 April 1983, Helmut Bacher, Helmuth Schulz and Georg Wendelin founded EREMA Engineering Recycling Maschinen und Anlagen GesmbH, laying the foundation for the 40-year success story. In celebration, the comapny will hold the event EREMA Discovery Day at the company headquarters on the 1st of June. This event with live insights into the latest post consumer and PET recycling technologies will also see the official opening of the newly built research and development centre.

ExxonMobil will present its portfolio of products that enable innovative solutions with sustainability benefits for hygiene and personal care applications at INDEX™23. This portfolio includes ExxonMobil™ PP, Achieve™ Advanced PP (polypropylene) and Vistamaxx™ performance polymers that can be used to create differentiated hygiene and personal care products.

An innovation being presented will be the model baby diaper of which the chassis is made exclusively with ExxonMobil’s extensive portfolio of products. Also on display will be a new version of the high-loft, ultra-soft, silky-smooth nonwoven solution for premium hygiene products using a blend of Vistamaxx™ performance polymers, Achieve™ Advanced PP and ExxonMobil™ PP. Developed collaboratively with Reifenhäuser Reicofil, this nonwoven solution delivers sustainability benefits by including ExxonMobil™ PP ISCC PLUS mass balance certified circular polymers using Exxtend™ technology for advanced recycling of plastic waste. Produced efficiently in one step from pellet to nonwoven via high-speed spunbond process, this soft nonwoven is ideal for use in premium diapers, pant-type diapers, feminine care and adult incontinence products.

SABIC will present its portfolio of PURECARES™ and TRUCIRCLE™ materials for the healthcare and hygiene market at INDEX™23 from April 18 to 21 in Geneva, Switzerland, under the theme of ‘Collaborating for sustainability and innovative solutions’.

At INDEX, SABIC will highlight a joint project with two market leaders, using certified circular polymers from the TRUCIRCLE portfolio in recyclable films for feminine hygiene, baby care and disposable medical applications. In all of these cases from diapers to surgical drapes and medical gowns, the sustainable materials can serve as direct drop-in alternatives with no compromise in production efficiency and product performance.

Further examples on display at the company’s booth will feature TRUCIRCLE solutions for facemasks, including an N95 design that localizes the value chain with SABIC® PURECARES PP spunbond and meltblown polymers in Saudi Arabia. SABIC provides complete solutions for facemask production as part of its localization strategy and has been a key enabler of the Saudi Made initiative. Also shown will be a closed-loop facemask developed in collaboration with industrial and research partners in Europe.

The company’s PURECARES polyolefin products are based on technologies free of both tris (nonylphenyl) phosphite (TNPP) and phthalates. Consumer comfort is achieved by using SABIC polypropylene (PP) and polyethylene (PE) polymers for bi-component fibers to answer multiple needs for soft and loft handfeel nonwovens, enabling easy lamination to other building blocks on medical nonwovens or absorbent hygiene applications.

In addition, SABIC produces TRUCIRCLE certified circular polymers for its PURECARES PP and PE portfolio with feedstock based on advanced recycling of mixed and used plastic that would otherwise typically not be suitable for mechanical recycling processes. These more sustainable solutions can be adopted in downstream processes as direct drop-in alternatives to incumbent materials with no compromise in production efficiency, purity and product performance.

The Swedish textile-to-textile recycling innovator Renewcell has signed a Letter of Intent with China Textile Academy Green Fibre Co. Ltd., an Chinese lyocell fiber producer, concerning a long-term commercial collaboration around man-made cellulosic fiber production.

The LOI provides the framework for an upcoming offtake agreement between the parties. The future legally binding offtake agreement will set out commercial terms for the delivery of 18,000 tonnes of Circulose® dissolving pulp to CTA Green Fibre over five years. CTA Green Fibre intends to use Circulose® as feedstock in the production of lyocell fibers to be supplied to textile manufacturers and fashion brands worldwide.

The agreement affirms the two companies’ intent to work together to supply lyocell textile fibers made using Circulose®, the 100% recycled textile pulp made by Renewcell, to global fashion brands in the coming years. The agreement has been facilitated by Ekman Group, Renewcell’s exclusive global trading partner.

Patrik Lundström, Renewcell’s CEO, commented: ”With this agreement, we take a new step in demonstrating the applicability of Circulose® in commercial-scale production of lyocell fibers. Lyocell is a high quality, low-impact fiber using closed loop production process which is highly sought after among our fashion brand partners that will now soon be available incorporating Circulose® recycled from textile waste. I am impressed by the innovative capacity and leadership of CTA Green Fibre and look forward to working together with them to make fashion circular together.”

A little over three years have passed since RadiciGroup announced the acquisition of Zeta Polimeri, an Italian company headquartered in Buronzo (VC) with over 30 years' experience in the recovery of pre- and post-consumer synthetic fibres and thermoplastic materials. Today, the company has become a full member of the Group with its new name Radici EcoMaterials Srl.

The new company’s long-standing know-how, combined with RadiciGroup’s as a whole, will create a virtuous production system that recovers worn-out materials (fabric, yarn and granules), or otherwise unusable materials, and processes them into raw materials available for other production cycles by taking advantage of industrial synergy.

Radici EcoMaterials is a strategic production site because it handles all the preliminary recovery stages: the sorting, processing and pre-treatment of materials, including those used for the production of post-consumer yarns and engineering polymers. In this sense, Radici EcoMaterials is in line with the most recent European policies on sustainable textiles, which address minimizing the share of materials destined for disposal sites, favouring instead more structured recycling solutions.

Radici EcoMaterials is also GRS certified. GRS certification ensures the complete traceability of its materials, which are made in a safe plant that meets the highest environmental and social certification standards.

The company is also equipped with a photovoltaic system and, for the portion of its energy needs not covered by the photovoltaic source, it partially relies on renewable energy. The goal is to use 100% green energy in the next few years, in accord with RadiciGroup's goals.

Ctrl+Z is ISKO’s latest innovation employing no virgin cotton, only recycled, and regenerated fibers: more durable, stronger, and now bluesign® APPROVED.

The leading denim ingredient brand and the full-service solutions system with a focus on sustainable chemistry have teamed up in a concerted effort to strengthen their partnership while promoting more sustainable textile production. ISKO has achieved the bluesign® APPROVED label for Ctrl+Z recycled denim fabrics containing no virgin cotton and only recycled and regenerated fibers that are made to be fully recyclable with the newest recycling technologies, enabling a fully circular system.

It is a credential that Bluesign grants only to bluesign® SYSTEM PARTNERs, including manufacturers, that meet the strict safety and environmental requirements of the bluesign® CRITERIA such as ensuring production sites are safe for workers, reducing CO2 emissions and water consumption, as well as avoiding hazardous substances in production among many others.

Specifically, Ctrl+Z is material science that hits “undo” on post-industrial waste delivering fabrics made from recycled and regenerated content that look and feel identical to their former compositions with increased strength and durability.