From the Sector

Reset
6 results
OCSiAl: New Graphene nanotube facility in Europe (c) OCSiAl Group
13.09.2023

OCSiAl: New Graphene nanotube facility in Europe

OCSiAl, a leader in graphene nanotube technologies, has been granted a construction permit for a nanotube production facility near Belgrade, Serbia. The new nanotube synthesis plant will be launched in 2024 and will have an initial annual capacity of 60 tonnes of graphene nanotubes. Over the next two years, the capacity of this plant will be increased to 120 tonnes per year. “The project will facilitate logistics and lower supply chain costs. European-produced nanotubes and nanotube derivatives will be primarily supplied to our customers in central and western Europe, North America, and Asia,” said OCSiAl Group Senior Vice President Gregory Gurevich.
 

OCSiAl, a leader in graphene nanotube technologies, has been granted a construction permit for a nanotube production facility near Belgrade, Serbia. The new nanotube synthesis plant will be launched in 2024 and will have an initial annual capacity of 60 tonnes of graphene nanotubes. Over the next two years, the capacity of this plant will be increased to 120 tonnes per year. “The project will facilitate logistics and lower supply chain costs. European-produced nanotubes and nanotube derivatives will be primarily supplied to our customers in central and western Europe, North America, and Asia,” said OCSiAl Group Senior Vice President Gregory Gurevich.
 
In addition to synthesizing nanotubes, the facility will manufacture nanotube suspensions for lithium-ion battery manufacturers in Europe, the US, and Asia – enough to enhance the performance of more than 1 mln electric cars with an average battery capacity of 75 kWh per car. OCSiAl nanotubes create long and robust electrical networks between active material particles, improving key battery characteristics, including cycle life, lower DCR, C-rate performance, and cohesion between active battery material particles, making the battery electrodes more durable. Graphene nanotubes unlock new battery technologies, including high-silicon content anodes, thick LFP cathodes, fast-charging graphite anodes, and more. They can be applied in both conventional and emerging battery tech, such as a dry battery electrode coating process, and solid-state batteries.
 
As well as synthesizing nanotubes and producing suspensions, OCSiAl project includes manufacturing of nanotube concentrates for high-performance polymers. The project has passed environmental impact assessment and it is 100% powered by green energy. It enjoys support from Serbian municipal and national governments. The plant is planned to be certified in accordance with ISO 9001, ISO 14001, and ISO 45001, and to be compliant with the IATF 16949 automotive industry standard. The project will create more than 200 job opportunities for engineers, scientists, managers, operators, and administrative staff.
 
Currently, OCSiAl has an extensive manufacturing system of nanotube-based products in the regions of highest market demand, such as China, Japan, Sri Lanka, Brazil, Malaysia, and other countries. The Serbia nanotube hub will operate in conjunction with the company’s operational R&D center and planned graphene nanotube synthesis facility in Luxembourg.

Source:

OCSiAl Group

05.07.2022

ITM 2022: Bringing Textile Technology Leaders together

ITM 2022 hosted textile technology leaders in Istanbul for 5 days, presenting the latest innovations in every field of textile from weaving, knitting, yarn, digital printing, finishing to denim. The ITM 2022 Exhibition, where a business volume of over 1.5 billion Euros was created in 5 days, accelerated the Turkish and world economy.

Organized by the partnership of Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc., ITM 2022- International Textile Machinery Exhibition was held at Tüyap Fair and Congress Center between 14-18 June.  ITM 2022 Exhibition, attended by 1280 companies and company representatives from 65 countries, was visited by 64,500 people from 102 countries, consisting of 44% international and 56% domestic visitors.

ITM 2022 hosted textile technology leaders in Istanbul for 5 days, presenting the latest innovations in every field of textile from weaving, knitting, yarn, digital printing, finishing to denim. The ITM 2022 Exhibition, where a business volume of over 1.5 billion Euros was created in 5 days, accelerated the Turkish and world economy.

Organized by the partnership of Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc., ITM 2022- International Textile Machinery Exhibition was held at Tüyap Fair and Congress Center between 14-18 June.  ITM 2022 Exhibition, attended by 1280 companies and company representatives from 65 countries, was visited by 64,500 people from 102 countries, consisting of 44% international and 56% domestic visitors.

Turkey became a Supply Center at the ITM 2022 Exhibition
The successful sales graph achieved at the ITM 2022 Exhibition proved that the difficulties experienced due to the pandemic for the last 3 years have been left behind. Turkey has become a supply center for European, Middle Eastern and African countries, especially with the disruption of the supply chain in Far East countries, including China. The profile of the professional visitors visiting the ITM 2022 Exhibition revealed that in the new world order that has shifted after the pandemic, the trade network has also changed hands and new players have appeared on the scene. The fact that manufacturers from all over the world such as Andorra, Angola, Honduras, Peru, Seychelles, Sierra Leone, Brazil, Sri Lanka, Tanzania, Egypt, Iran, and Oman purchased a large number of machinery and signed collaborations at the ITM 2022 Exhibition has proven this.

Exhibitors of ITM 2022 enlarge their stands for ITM 2024
Many company officials, who stated that they have achieved a sales graphic far above their expectations starting from the very first day of the ITM 2022 Exhibition and that they have hosted visitors from all over the world, decided to enlarge their stands at the ITM 2024 Exhibition. During the exhibition, companies visited the registration application points and applied for ITM 2024 participation.

The next meeting of the ITM and HIGHTEX Exhibitions will be held in Istanbul between 4-8 June 2024.

Source:

ITM / Teknik Fairs INC.

DSM/MKU Ltd: High-performance, lightweight ballistic protection in Brazil (c) DSM Protective Materials: DSMPMPR007
26.04.2021

DSM/MKU Ltd: High-performance, lightweight ballistic protection in Brazil

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, announced that, together with armor manufacturing partner, MKU Ltd, has provided next generation armor technology with Dyneema® unidirectional (UD) material to support the Sao Paulo police.

The Sao Paulo police, which is comprised of more than 100,000 officers, is the first law enforcement agency in Brazil to initiate a tender for personal protective equipment based on the latest National Institute of Justice (NIJ) .06 standards for body armor, which provide comprehensive and rigorous compliance for the performance and testing of ballistic materials. In addition to NIJ .06 certification, the tender set extremely lightweight requirements for level IIIA soft armor vests.

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, announced that, together with armor manufacturing partner, MKU Ltd, has provided next generation armor technology with Dyneema® unidirectional (UD) material to support the Sao Paulo police.

The Sao Paulo police, which is comprised of more than 100,000 officers, is the first law enforcement agency in Brazil to initiate a tender for personal protective equipment based on the latest National Institute of Justice (NIJ) .06 standards for body armor, which provide comprehensive and rigorous compliance for the performance and testing of ballistic materials. In addition to NIJ .06 certification, the tender set extremely lightweight requirements for level IIIA soft armor vests.

The hybrid vest solution developed MKU, a global leader in defense and homeland security solutions, for the Sao Paulo police utilizes predominantly Dyneema® UD material to reach new levels of performance and protection while simultaneously enhancing user comfort and mobility. Dyneema®, a strong and light fiber, is the one of leading global brands for ultra-high molecular weight polyethylene (UHMwPE) fiber, UD and fabrics, offering ballistic solutions for personal and vehicle armor that combine maximum strength with minimum weight.

In soft armor applications, Dyneema® offers up to 35 percent weight reduction when compared to competitive materials, while still protecting against both legacy and emerging threats.

In addition to the lightweight armor requirement, the vests were also thoroughly tested to ensure performance with NIJ ballistic reports, NIJ certification and in-house ballistic testing both during the tender process and after the vests were received.

In line with DSM’s commitment to protect people and the environment they live in, one of the world’s first ever bio-based HMPE fibers was introduced in 2020.

Logo Rieter (c) Rieter
05.11.2020

Strategic Partnership Between Rieter and WW Systems

  • License agreement concluded for promising technology
  • Integration into the digital spinning suite ESSENTIAL
  • Implementation of digital strategy further advanced

The Rieter Group concludes a license agreement with WW Systems on November 5, 2020 and will integrate the Brazilian company's promising product into its digital spinning suite ESSENTIAL. "OptCotton" from WW Systems offers the only software system worldwide that enables an even blend of cotton for the spinning process. With this cooperation, Rieter is taking an important step forward in implementing its digital strategy and offering its customers further added value in yarn production.

  • License agreement concluded for promising technology
  • Integration into the digital spinning suite ESSENTIAL
  • Implementation of digital strategy further advanced

The Rieter Group concludes a license agreement with WW Systems on November 5, 2020 and will integrate the Brazilian company's promising product into its digital spinning suite ESSENTIAL. "OptCotton" from WW Systems offers the only software system worldwide that enables an even blend of cotton for the spinning process. With this cooperation, Rieter is taking an important step forward in implementing its digital strategy and offering its customers further added value in yarn production.

"OptCotton" eliminates variations in quality between cotton blends that are being prepared for the spinning process. In this way, standardized quality yarn can be produced efficiently in the spinning process. From the arrival of the bales in the warehouse to their use in the blowroom line, “OptCotton” manages the entire blending process with no need for categorization. This results in increased efficiency in storage and logistics as well as machine performance.

Integration into the digital spinning suite ESSENTIAL
By integrating this solution, Rieter strengthens its digital spinning suite ESSENTIAL. Access to bale-related fiber data and raw material information opens up new possibilities for controlling the spinning mill. In combination with the existing modules ESSENTIALbasic, ESSENTIALmonitor, ESSENTIALmaintain and ESSENTIALpredict, this optimizes the entire spinning process and raises digital intelligence to a new level.

Source:

Rieter Management AG

Monforts texCoat coating system (c) Monforts / AWOL Media
06.10.2020

Monforts at Innovate Textile & Apparel (ITA) 2020

During the Innovate Textile & Apparel (ITA) virtual textile machinery show which will run from October 15th-30th 2020, Monforts will be emphasising its leadership position in three key fields – advanced coating, denim finishing and fabric sanforizing.

With its multi-head capability, the latest Monforts texCoat coating system provides flexibility with an unprecedented range of options and a wide range of modules available.

Refinements
“Since we acquired the coating technology that our systems are based on we have made a lot of refinements and all of them are reflected in higher coating accuracy and the resulting quality of the treated fabrics,” says Monforts Head of Technical Textiles, Jürgen Hanel.
“Our systems have the shortest fabric path from the coating unit into the stenter and we have all variations of coating application systems too – and all of these options are available in wider widths, with the engineering and manufacturing from a single source here in Europe.”

During the Innovate Textile & Apparel (ITA) virtual textile machinery show which will run from October 15th-30th 2020, Monforts will be emphasising its leadership position in three key fields – advanced coating, denim finishing and fabric sanforizing.

With its multi-head capability, the latest Monforts texCoat coating system provides flexibility with an unprecedented range of options and a wide range of modules available.

Refinements
“Since we acquired the coating technology that our systems are based on we have made a lot of refinements and all of them are reflected in higher coating accuracy and the resulting quality of the treated fabrics,” says Monforts Head of Technical Textiles, Jürgen Hanel.
“Our systems have the shortest fabric path from the coating unit into the stenter and we have all variations of coating application systems too – and all of these options are available in wider widths, with the engineering and manufacturing from a single source here in Europe.”

CYD
Denim finishing is meanwhile a field in which Monforts has an undisputed lead and it has been working closely with its many partners in the key denim manufacturing countries of Bangladesh, Brazil, China, India, Mexico Pakistan and Turkey to develop advanced solutions. The latest of these is the CYD yarn dyeing system.
“CYD is based on the proven Econtrol® dyeing system for fabrics*,” explains Monforts Head of Denim Hans Wroblowski. “It integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity. The CYD system has been developed in response to a very strong market demand.”

Pre-shrinking
Monforts has also recently delivered a significant number of its latest Monfortex sanforizing lines to customers around the world.
Sanforizing is vital to final fabric quality, pre-shrinking it by compressing prior to washing, to limit any residual or further shrinkage in a made-up finished garment to less than 1%, for perfect comfort and fit over an extended lifetime.

As with industry-leading Montex stenters, Monfortex lines benefit from the latest Qualitex 800 control system which allows all parameters to be easily automated via the 24-inch colour touchscreen, including production speed, control of all fabric feed devices, rotation spray or steaming cylinder options, the width of the stretching field and the rubber belt pressure. Up to 10,000 separate process parameter records can be generated and stored by the data manager.

 

*Econtrol® is a registered mark of DyStar Colours Distribution GmbH, Germany.

President of Indonesia Inaugurates Country’s Largest Viscose Rayon Facility (c) APR
President of Indonesia Inaugurates Country’s Largest Viscose Rayon Facility
21.02.2020

APR: New Viscose Rayon Facility

  • Investment of Rp. 15 trillion (USD1,1 billion) in facility
  • Supports development of national textile industry and ‘Making Indonesia 4.0’ roadmap

The President of Indonesia, Joko Widodo, today inaugurated Indonesia's largest integrated viscose rayon production facility, injecting a boost for the country’s textile sector and the Indonesian Government’s industrial 4.0 development strategy.

The new Asia Pacific Rayon (APR) facility is located in the same production complex as APRIL Group in Pangkalan Kerinci, Riau province, Sumatra. This co-location allows integrated operations where renewable plantation pulp supply from APRIL feeds directly to APR for viscose rayon production. The new operation represents a total investment of approximately Rp.15 trillion (USD1.1 billion).

The APR facility has an annual production capacity of 240,000 tons. The inauguration ceremony included the signing of a plaque by President Widodo and the symbolic sealing by the President of an export container with 10,190 tons of viscose rayon fibre for shipment to Turkey, one of APR’s key export markets, and another 12,000 tons to Central Java.

  • Investment of Rp. 15 trillion (USD1,1 billion) in facility
  • Supports development of national textile industry and ‘Making Indonesia 4.0’ roadmap

The President of Indonesia, Joko Widodo, today inaugurated Indonesia's largest integrated viscose rayon production facility, injecting a boost for the country’s textile sector and the Indonesian Government’s industrial 4.0 development strategy.

The new Asia Pacific Rayon (APR) facility is located in the same production complex as APRIL Group in Pangkalan Kerinci, Riau province, Sumatra. This co-location allows integrated operations where renewable plantation pulp supply from APRIL feeds directly to APR for viscose rayon production. The new operation represents a total investment of approximately Rp.15 trillion (USD1.1 billion).

The APR facility has an annual production capacity of 240,000 tons. The inauguration ceremony included the signing of a plaque by President Widodo and the symbolic sealing by the President of an export container with 10,190 tons of viscose rayon fibre for shipment to Turkey, one of APR’s key export markets, and another 12,000 tons to Central Java.

The ceremony was also graced by the Minister of Industry, Agus Gumiwang Kartasasmita, the Minister of Trade Agus Suparmanto, the Governor of Riau, Syamsuar, RGE Founder and Chairman Sukanto Tanoto, and Anderson Tanoto, Director, RGE.

Speaking at the inauguration, President Widodo welcomed APR's investment in the development of the national textile industry. The role of the private sector was influential in driving economic growth, alongside the stimulus provided by the Government, he said. “Our garment industry should be greater than Vietnam. We already have our own raw materials here, such as viscose rayon, to support the industry,” he said.

Economic Contribution
APR’s business aligns with President Jokowi's vision to encourage more value-added investment in the nation and the strengthening of the national textile and textile product (TPT) industry, as set out in the Making Indonesia 4.0 Road map. In addition, the production of viscose rayon will reduce dependence on the import of textile raw materials, particularly cotton, to meet domestic demand.

Agus Gumiwang Kartasasmita, Minister for Industry, said: “By optimising the availability and use of raw materials originating from Indonesia, we can boost the performance of our textile sector. This is just one of several steps we are taking to continue to improve the performance and competitiveness of the labour-intensive industry.”

Basrie Kamba, Director APR, said: “The presence of APR will have a positive impact on employment and business opportunities for small and medium-sized businesses in the upstream and downstream sectors of the textiles and textile products industry. We are honoured and grateful to President Jokowi for inaugurating our new facility”.

In addition to Turkey, APR’s products are exported to 14 other countries including key textile centres such as Pakistan, Bangladesh, Vietnam, Brazil, and various parts of Europe. The products also support an expanding Indonesia fashion industry.

It is estimated that APR may generate foreign exchange revenues exceeding Rp1.77 trillion (USD130 million) annually, and reduce dependence on imported raw materials by about Rp2.01 trillion (USD149 million) annually.

Sustainable Production
APR produces sustainable viscose rayon fiber from renewable, traceable and biodegradable raw materials. The company’s raw materials are supplied by APRIL Group, which is recognised as a responsible pulp producer through national (Timber Legality Verification System) and international (Program for the Endorsement of Forest Certification/PEFC) certifications.

APR is the first viscose rayon manufacturer in Indonesia to receive the internationally recognised STeP certification from OEKO-TEX ®, an independent Swiss-based certification organisation, for the responsible manufacturing of viscose staple fibre.

APR has launched the ‘Everything Indonesia’ campaign to promote the sustainable sourcing and production of fashion from Indonesia. The aim is to support Indonesia’s resurgence as a global centre for textile manufacturing, and catalyse home-grown fashion design and creativity.

Source:

Omnicom Public Relations Group