From the Sector

Reset
1087 results
Diese Frühjahr-Sommer-Saison 2018 entführt uns die Kollektion von Graciela Huam auf den Gray Beach, den Strand von Lima.  ©GRACIELA HUAM
Graciela Huam Frühjahr-Sommer-Saison 2018
21.09.2017

GRACIELA HUAM SPRING SUMMER 2018 - Gray Beach

  • This Spring Summer Season 2018 Graciela Huam's second knit collection takes us to the Gray Beach…

Northern Europe is known for its short summer, the cool wind during the morning and evening and its unpredictable climate. Those countries are not warm even during the summer season.

Therefore, many people often travel to the south: Spain, Italy, Portugal or Asia longing for sun, sand and sea. And there is Lima, a coastal city with a good climate and a characteristic grey sky throughout the year, where the sun is hidden among the dense clouds, but despite this detail, its strong presence is still felt. If we move to Lima, we lie on the sand and cast our gaze to the sky as it teleports us to the cold northern European sky with the difference that our presence is on that warm gray beach.

Graciela Huam takes its heritage and inspiration from The Netherlands and Peru, those are the countries that influence and guide her work. The designer combines the vibrant Peruvian culture with the Dutch avant-garde design and her favorite colours are powered by the landscapes of both.

  • This Spring Summer Season 2018 Graciela Huam's second knit collection takes us to the Gray Beach…

Northern Europe is known for its short summer, the cool wind during the morning and evening and its unpredictable climate. Those countries are not warm even during the summer season.

Therefore, many people often travel to the south: Spain, Italy, Portugal or Asia longing for sun, sand and sea. And there is Lima, a coastal city with a good climate and a characteristic grey sky throughout the year, where the sun is hidden among the dense clouds, but despite this detail, its strong presence is still felt. If we move to Lima, we lie on the sand and cast our gaze to the sky as it teleports us to the cold northern European sky with the difference that our presence is on that warm gray beach.

Graciela Huam takes its heritage and inspiration from The Netherlands and Peru, those are the countries that influence and guide her work. The designer combines the vibrant Peruvian culture with the Dutch avant-garde design and her favorite colours are powered by the landscapes of both.

The products are designed in the Netherlands and created in the Andes of Peru, using only the most exclusive Peruvian materials such as the luxurious Alpaca and the famous Pima Cotton. All garments are made by passionate and skilled Peruvian craftspeople. This results in beautiful and high quality garments and a contemporary, prêt-à-porter style, creating versatile collections of knitwear.

Graciela Huam follows the principles of responsible and sustainable production, using traditional methods in order to achieve quality that is superior to industrially made products.

The brand is committed to partnering with local entrepreneur artisans and is working in association with a group certified with the principles of fair trade. Knitwear will always be a good investment and just like a work of art can create a truly iconic end result.

The choice of fabrics and production of Graciela Huam's knitted garments combined with this unique technique will reveal to you the high dedication and passion the designer feels for her work.

Business interaction Messe Frankfurt Exhibition GmbH
Business interaction
14.09.2017

Intertextile Shanghai Home Textiles attracted more trade buyers this year resulting in strong business outcomes

Overseas exhibitors found the fair an effective platform to open up the Asian market
Buyers benefited from wide range of quality exhibitors

Overseas exhibitors found the fair an effective platform to open up the Asian market
Buyers benefited from wide range of quality exhibitors

The 23rd edition of Intertextile Shanghai Home Textiles is over, with both exhibitors and buyers satisfied with the business outcomes resulting from the fair’s four days. The largest home textiles trading event in Asia was held from 23 – 26 August, attracting 1,106 exhibitors from 30 countries and regions. Given the strengthening market conditions in China the fair maintained its popularity, with the number of trade buyers increasing to 38,964 from 99 countries and regions (2016: 37,779 from 98 countries and regions). The show also attracted more international buyers this edition, with a 16% increase in those coming from abroad. “Intertextile Shanghai Home Textiles has once again proven its leading position in Asia as a business and order platform for the industry. There was a noticeable positivity from both exhibitors and buyers this edition regarding the current and future situation of the domestic market, so we are optimistic about the industry for the next year,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd said.

Overseas exhibitors found the fair an effective platform to open up the Asian market

As the leading event of its kind in the region, the fair successfully attracts a number of Chinese and Asian buyers every year, ensuring suppliers can develop their business further in the region. This year, seven country and region pavilions including Belgium, India, Korea, Morocco, Pakistan, Taiwan and Turkey were formed, with exhibitors from all of satisfied they could meet their target buyers.

While being in the minority at the fair, European brands still managed to catch the attention of visitors due to strong interest in their products from Asia. The Italian upholstery supplier Enzo Degli Angiuoni Spa was satisfied with the number of Asian buyers, particularly Chinese, that they met at the fair. Mr Stefano Laurenzano, Export Area Manager expressed: “A lot of visitors that saw us here last year have come back again and are serious about cooperating with us. Here you can get a lot of new contacts and discover the Asian market. We’ve had mainly Chinese buyers, but have had more Asian buyers from South Korea, India, Malaysia and elsewhere to visit us this year. We are seeing more business here in recent years.”

Being a newcomer to the fair, Iceland Duvet ehf felt the potential in China. “We’ve had enough buyers including retailers and manufacturers visiting our booth to make our participation worthwhile. The interest from the buyers has been genuine. Being a European brand helps more than at fairs in Europe as we can stand out more here,” Mr Ragnar Ludvik Runarsson, representative said.

Indian exhibitor, Paramount Textile Mills Ltd has been joining the fair for three years. “Apart from meeting our existing customers, we’ve had enquiries from potential new customers from China as well as overseas including the US and South America,” Mr Ram. M., Director of Marketing & Finance said.

Also with three years’ participation, Mr Samir Tazi, General Manager of PIF Textile Emotions from Morocco affirmed the show’s effectiveness in meeting important buyers and decision makers. “It’s easier for us to meet them here compared with some smaller European fairs. Thanks to Intertextile Shanghai, we have also met the major players in China.” Talking about this year’s result, he continued: “We were very busy. We met with more people than any other fairs. There are a lot of new buyers and also returning buyers checking out our new products.”

Participating in the Korea Pavilion, Sangwon Textile Co Ltd found the fair helpful in attracting distributors and wholesalers from Southeast Asia. Mr Jeon Hyeon Tae, Sales Manager said: “We have found about five potential and quality distributors from Taiwan, India, Philippines and Singapore on the first day. We also got to meet a number of wholesalers who prefer to buy from us directly at the fair.” He added that Intertextile Shanghai is also an ideal platform to launch new products for their existing clients.

As the largest pavilion this year, the Turkey Pavilion was in the limelight of the show, with both new and veteran exhibitors finding it useful to exhibit in Intertextile Shanghai. Bezmez Ev Tekstil did not intend to receive any orders in their first show, but was surprised to obtain three in just one day. These concrete results reassured their likelihood of coming back next year. “We definitely see the potential for Turkish products here in China as Chinese companies prefer quality products nowadays,” Mr Ayhan Bezmez, representative, further commented. Mr Fahri Goksin, Vice President of Gokhan Tekstil agreed with Mr Bezmez that Chinese buyers are in favour of new things like imported goods and Western brands. His company has been in the Shanghai fair for six years and continued to get satisfactory results. “We’re looking for retailers, wholesalers and online buyers. We’ve had all of these visiting our booth already.”

Domestic exhibitors satisfied with the number of potential customers and orders received

Recently, there is strong signs suggesting that the home textiles market in China is recovering with both imports and exports rising gradually. The positive outcome that Chinese exhibitors achieved at the August’s fair have resonated with the market condition. It is no surprise to see a number of domestic booths packed with visitors throughout the days. SohoCUT is a case in point. To them, Intertextile Shanghai is the place for actual business. “Compared with other fairs we’ve been to, this is the exhibition where a huge number of international buyers gather. We met buyers from China, Mexico, Russia, the US, India and Southeast Asia. We even got large orders for the first two days.” Mr Wheatley Weng, Managing Director said.

The fabrics of Wujiang Linwang Weaving Mill is also sought after at the fair. Being a company that do both exports and domestic trade, they are happy to connect with local and overseas customers during the show. “We’ve collected around 100 leads on the first day, of which 70% are domestic and the remaining being international. The overseas visitors are from Italy, Poland, Germany, Denmark, Chile and Korea that our products precisely meet their requirement. We see high chances of cooperation after the fair.” Mr Kenny, Sales Manager said.

Given the prevailing smart home concept in China, Somfy China Co Ltd which specialised in advanced sun-protection system has become one of the highlights at the fair. Ms Nancy Nan, Chief Executive Officer mentioned: “The visitor flow has been really high that our booth is swarmed by buyers. Amongst those visitors, there is no lack of medium to high-end customers who placed orders immediately.”

Editors assembled to promote high-end products

To cater to the ascending standards of Chinese customers, Intertextile Shanghai once again brought editors together in hall 5.1 to maximise their exposure to their target buyers. As foreign brands with subsidiaries in China, JAB and Prestigious see the growing interest in their premium products in China. “We pay attention to the changing buying habits of Chinese consumers and, as such, have started promoting a series of products under a unified lifestyle trend. It’s obvious that we are gaining more awareness from buyers at the fair,” Mr William Lin, Vice President of JAB ANSTOETZ Interior (Shanghai) Co Ltd said. He also appreciated the specific display area for imported fabrics and the organisers’ attempt to attract more designers, which helped them meet more potential customers. Apart from getting onsite orders, Prestigious Textiles (Shanghai) Ltd also considers the show a promotion platform. “There is great demand for our products in China. Though we achieved similar sales compared with last year, through this fair our brand has been well introduced to the market,” Mr Lewis Liu, Sales Director expressed.

Originating from China, Euroart Co Ltd was another editor that successfully showcased their latest collection at the fair. “It is a good time to join the most influential home textiles exhibition in Asia as we have just launched new products in May. We are satisfied as some of our existing clients plus new visitors came to our booth,” Ms Guo Jianhua, Director Assistant said.

Industry players benefit from the expanded Digital Printing Zone

The demand for digital printing solutions has been growing in recent years, especially as the industry has put more emphasis on green production. As such, the Digital Printing Zone expanded in size this edition, incorporating a Seminar Area and more exhibitors.

As an Italian company, MS Printing Solutions Srl experienced the potential of the sector in China. “The fair has been busy, and we’ve had steady flow of buyers coming through. The potential in digital printing here is just beginning. The Chinese government is pushing companies to reduce their pollution, so it has a big advantage in this regard over traditional textile printing,” Mr Walter Oggioni, Regional Sales Manager stated, adding that the company has been growing very fast globally, especially in China, Turkey, India and Pakistan.

This potential holds for domestic machine manufacturers as well. Specialising in the production of digital printing machines, Guangzhou Xu Cheng Electronic Technology Co Ltd was at the fair to meet fabrics suppliers. Mr Jesse Luo, Overseas Manager explained: “Compared with exhibitions for textile machinery, Intertextile Shanghai attracts more fabrics suppliers, which are our target clients. It helps even more as we are located in this special zone. We’ve been talking to a lot customers, including overseas buyers who are also interested in our machines.”

A series of seminars also provided opportunities for the industry to share their insights on this emerging sector. As a speaker, Foshan Sanshui Yingjie Precision Machinery believed the session was mutually beneficial for them and the audience. “Attendees are from the whole sector including manufacturers and end users, so we can discuss different perspectives. It will facilitate our improvement,” Mr Peng Jichang, General Manager said. Mr Scott Bai, representative of Huntsman Textile Effects (China) Co Ltd also benefited from visiting the zone and the seminar. “Together with seminar, the Digital Printing Zone can professionally present the current situation for the industry. When suppliers and users come together, we can discover the way to enhance this technology.”

Buyers benefited from wide range of quality exhibitors

Intertextile Shanghai is the largest trading platform in Asia with the whole spectrum of home textiles and accessories on offer. Hence, visitors, be they Chinese or overseas, can access a wide range of quality suppliers that meet their sourcing needs. Australian buyer, Mr Glenn Whitchurch from Trabeth Textiles, was impressed with his sourcing journey. “The polyester quality of domestic exhibitors has been unbelievable. What’s more, we’ve found the Chinese suppliers to be very flexible in meeting our needs, they’re clearly keen to accommodate overseas buyers.” Mr Whitchurch also commented favourably on the product range at Intertextile Shanghai compared to European fairs.

One ongoing trend at the fair over recent years is the increasing quality of domestic suppliers, which attracts buyers to come back and source. Mezanin V SRL from Moldova is a long-term supporter of the show, and place orders every year. Its Vice Director, Mr Mihail Tornea remarked: “It is an important event for us to meet new suppliers from China. We are selective with the suppliers we work with, but the Chinese companies here meet our requirements. As a sourcing event, Intertextile Shanghai is the best place to be.”

The fair’s VIP buyer programme also assists buyers in meeting worldwide exhibitors at ease. Mr Bibo Lan is the co-founder of Loft Curtains in the US and he is excited to meet lots of potential suppliers here. “The arrangement for VIPs is satisfying and it helps a lot to have my target exhibitor information in advance. The largest benefit of our visit is that we met Libeco from Belgium, while we also confirmed to work with a blackout supplier at the fair,” he said.

Chinese buyers agreed that Intertextile Shanghai is the most effective sourcing platform in Asia. “Overseas suppliers like Turkey exhibitors are our main interest. So far, we have connected with four to five exhibitors in hall 4 and will place orders with them soon. In terms of exhibitor number and the product range, I feel that the fair has improved a lot. It is my favourite show with a lot of overseas products to discover,” Mr Huang Shenghua, General Manager of Ziranfeng Home Textile Co Ltd said.

Concurrent events inspired the industry

Apart from facilitating business between exhibitors and visitors, the fair also incorporated various design elements via a series of concurrent events. These included display area like Trend Area, International Fiber Art Exhibition and Home Furnishing Crossover Exhibition where participants could find innovative designs and ideas.

This was also the first time the Andrew Martin International Interior Design Summit and the fair took place concurrently. Experts from the interior design, architecture and art sectors were invited to share and discuss their views on the transformation of design in the new information era. Mr Kot Ge, founder of a domestic interior design studio, LSDCASA was delighted to join, and shared: “This show always attracts many top interior designers and it’s my pleasure to meet them here. Interior design and home textiles are closely related and new concepts can bring along improvement.”

Intertextile Shanghai Home Textiles – Autumn Edition was organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA). The next Autumn Edition will take place in August 2018, while the Spring Edition runs from 14 – 16 March 2018.
To find out more about this fair, please visit: www.intertextilehome.com.
For more information about Messe Frankfurt textile fairs worldwide, please visit: http://texpertise-network.messefrankfurt.com.

 

Business Beyond Borders, Texworld Paris 18th – 21st September 2017
Business Beyond Borders
11.09.2017

Business Beyond Borders, Texworld Paris 18th – 21st September 2017

  • Asia comes to Paris and is ready to buy

The next Business Beyond Borders matchmaking event will take place in Paris at Texworld, the leading textile, clothing and apparel trade fair, September 2017.

After two successful matchmaking sessions at Genera (Madrid) and African Utility Week (Cape Town), the next Business Beyond Borders (BBB) matchmaking event turns its attention to one of the most renowned European trade fairs – Texworld - the leading textile, clothing and apparel trade fair. Twice a year Texworld Paris welcomes exhibitors and professional buyers from all over the world a rich variety of products from basic textiles to creative high-end fabrics of excellent quality. Hosting thousands of visitors, Texworld Paris is famous as the must-attend market for textile companies, especially from the EU and Asian side.

  • Asia comes to Paris and is ready to buy

The next Business Beyond Borders matchmaking event will take place in Paris at Texworld, the leading textile, clothing and apparel trade fair, September 2017.

After two successful matchmaking sessions at Genera (Madrid) and African Utility Week (Cape Town), the next Business Beyond Borders (BBB) matchmaking event turns its attention to one of the most renowned European trade fairs – Texworld - the leading textile, clothing and apparel trade fair. Twice a year Texworld Paris welcomes exhibitors and professional buyers from all over the world a rich variety of products from basic textiles to creative high-end fabrics of excellent quality. Hosting thousands of visitors, Texworld Paris is famous as the must-attend market for textile companies, especially from the EU and Asian side.

Business Beyond Borders supports businesses, especially Small and Medium Enterprises (SMEs) and Clusters, to operate internationally. During the fair, BBB facilitates the participation and meetings between relevant potential trading partners from Europe and abroad with the aim of assisting them in the conclusion of business deals.

Welcoming Arnaldo Abruzzini, CEO of EUROCHAMBRES, says “with over 80% international exhibitors, Texworld is the perfect marketplace for EU textile SMEs keen to do business internationally”. Takin into account the Free Trade Agreements which have been concluded by the EU in the last five years and those that are currently under negotiation, the EU is making several progresses in facilitating international trade as well as on the simplification of the Rules of Origin. “The BBB matchmaking at Texworld present itself an opportunity to increase the export rate of textile and clothing products to non-EU markets, which currently stands at 20%.”

The event will also be supprted by Enterprise Europe Network (EEN), the world’s largest support network for small and medium-sized enterprises (SMEs) with international ambitions. “With over 15 EEN partners co-organising the event – says Federica Leonetti, Chair of the Textile & Fashion EEN Sector Group – the companies taking part in the BBB matching event at Texworld will receive personalised support to be successful in their goals.”  

Companies attending the BBB Matchmaking will be able to benefit from a unique package:

• Free access to Texworld and to the connected shows: Apparel Sourcing, Avantex, Shawls and Scarves;
• Business meetings perfectly matching each BBB delegate needs and preferences taking place in a convenient matchmaking area at the heart of the trade fair;
• Access to technical sessions in the strategic conference on IPR, Market Access and the Circular Economy in the textile and clothing sector;
• Access to an international and well placed worldwide network, including several EU-funded support schemes;
• Participation in the BBB Social Media Competition for a chance to further promote your business online;
• Professional assistance on the spot and after the event to make the participation tailored to the needs of each BBB delegate;
 
The registration is now open at https://www.b2match.eu/texworld2017. More than 200 companies are expected to attend the B2B Meetings in the dedicated BBB area.
 
Source:

Business Beyond Borders (BBB)

Green products to be centre stage at October’s Yarn Expo Autumn ©Messe Frankfurt
Logo Yarn Expo
08.09.2017

Green products to be centre stage at October’s Yarn Expo Autumn

  • Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products
  • Six special display zones cater to latest industry trends

Green products continue to be sought after more and more by consumers nowadays, and textiles are no exception. In order to promote sustainable development throughout the industry, a number of yarn and fibre manufacturers have endeavoured to introduce green products into the early stages of textile production, and Yarn Expo, as the leading yarn and fibre business platform in Asia, serves as an ideal stage for these suppliers to gain exposure to buyers looking for such products.

Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products

  • Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products
  • Six special display zones cater to latest industry trends

Green products continue to be sought after more and more by consumers nowadays, and textiles are no exception. In order to promote sustainable development throughout the industry, a number of yarn and fibre manufacturers have endeavoured to introduce green products into the early stages of textile production, and Yarn Expo, as the leading yarn and fibre business platform in Asia, serves as an ideal stage for these suppliers to gain exposure to buyers looking for such products.

Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products

Amongst a record number of exhibitors at this October’s Yarn Expo Autumn, the debut BCI Pavilion as well as the Sateri Pavilion and Birla Planet Pavilion that include eco-friendly products are certainly amongst the highlights this year. Better Cotton Initiative (BCI) is a global organisation with more than 1,000 members including spinners, weavers and garment manufacturers throughout the entire cotton sector. It aims to promote sustainable cotton production, benefiting workers, customers and the environment as a whole. They will form the BCI Pavilion in Yarn Expo for the first time, with five spinners showcasing their cotton yarn manufactured with eco-friendly cotton.

Sateri is a well-known brand in China which specialises in viscose rayon. This natural and high-quality fibre is made from trees grown on renewable plantations. They are the largest producer of viscose fibre in China with three mills and an annual capacity of 550,000 tons, and also have Oeko-Tex certification. This October, nine other domestic exhibitors will form the Sateri Pavilion to demonstrate their comfortable textiles and skin-friendly hygiene products made from viscose fibre.

With over 50 years of experience in manufacturing cellulosic fibres, Birla Group strives to provide greener, purer and safer products to its customers. The Group has operated in China for three years now, and values Yarn Expo’s effectiveness in helping them to promote their brand and attract a wide range of buyers. “We managed to get connected with a number of downstream buyers at the fair. We have introduced our company and products to them that there is great chance for future cooperation.” said Mr Peter Dong, Senior Manager of Aditya Birla Group.   Coming back this year, the Birla Planet Pavilion will feature three of their highlighted fibres – Birla Viscose, Birla Modal and Birla Spunshades at the fair.

Six special display zones cater to latest industry trends

The textile industry in China is undergoing a structural change with keen competition, so domestic suppliers have to develop innovative and quality products to satisfy the ever-changing markets. To match the specific needs of various buyers, Yarn Expo has established six distinct display zones gathering the leading domestic companies, namely Colourful Chemical Zone, Natural Cotton Yarn Zone, Fancy Yarn Zone, Quality Wool Zone, Green Linen Zone and e-Commerce Zone.

Not only are a number of chemical fibre products with innovative, eco-friendly and health & comfort properties on offer from exhibitors, but visitors can also gain insights into product trends in these areas from the 2017/18 China Fibre Trend Area and Innovative Textile Material Forum, both of which feature in the Colourful Chemical Zone. The Natural Cotton Yarn Zone is another highlight of the three-day show, where exhibitors will showcase their natural cotton yarn and a range of functional products. Around 50 suppliers will also showcase their latest collections in the expanded Fancy Yarn Zone.
In response to the strong demand for fibre and yarn products in China and the Asian region, the coming autumn edition of Yarn Expo will double its exhibition space, and will accommodate around 500 global yarn suppliers from 13 countries and regions. Together with Yarn Expo Autumn 2017, three other textile trade fairs are held concurrently from 11 – 13 October in the same venue: Intertextile Shanghai Apparel Fabrics – Autumn Edition, PH Value and the China International Fashion Fair (CHIC).

Yarn Expo Autumn is organised by Messe Frankfurt (HK) Ltd; The Sub-Council of Textile Industry, CCPIT; China Cotton Textile Association; China Wool Textile Association; China Chemical Fiber Association; China Bast & Leaf Fibres Textiles Association; and China Textile Information Centre.

Trevira GmbH Trevira GmbH
Trevira GmbH
04.08.2017

Joint booth with 18 top clients – Trevira implements a new approach at Heimtextil 2018

At Heimtextil, which is to be held in Frankfurt from 9 to 12 January 2018, Trevira GmbH will be represented together with some important Trevira CS clients in Hall 4.2 at a 1,305 m2 booth.
The core of this joint booth will be a Trevira exhibition. Participating clients will present their latest Trevira CS collections for home textiles and commercially used textiles at individual stands around this core exhibit. The joint stand is located in close proximity to the new exhibition “Interior. Architecture. Hospitality. EXPO” of Messe Frankfurt.
“We are delighted to be able to make a significant contribution to the new thematic focus of Hall 4.2 with our trade fair concept for next year. It enables us to offer a platform to our clients allowing them to reach important decision-makers. In

At Heimtextil, which is to be held in Frankfurt from 9 to 12 January 2018, Trevira GmbH will be represented together with some important Trevira CS clients in Hall 4.2 at a 1,305 m2 booth.
The core of this joint booth will be a Trevira exhibition. Participating clients will present their latest Trevira CS collections for home textiles and commercially used textiles at individual stands around this core exhibit. The joint stand is located in close proximity to the new exhibition “Interior. Architecture. Hospitality. EXPO” of Messe Frankfurt.
“We are delighted to be able to make a significant contribution to the new thematic focus of Hall 4.2 with our trade fair concept for next year. It enables us to offer a platform to our clients allowing them to reach important decision-makers. In

addition, visitors to the trade fair will appreciate being able to find such a large number of Trevira CS novelties and collections in a one-stop-shop,” says Anke Vollenbröker, Head of Marketing at Trevira GmbH.
Trevira CEO Klaus Holz is pleased that the idea of a joint stand has been so well received by their clients. “The high level of demand shows that our concept of a comprehensive partnership with our clients pays off. Our long-standing clients appreciate that we not only offer them high quality and sustainably produced fibres and yarns, but that we also support them with our technical expertise and in marketing their Trevira fabrics.”


The following clients will be represented with a large selection of their beautiful and modern Trevira CS fabrics at the joint booth in January: Baumann Dekor Ges.m.b.H., Engelbert E. Stieger AG, FIDIVI Tessitura Vergnano S.p.A., Jenny Fabrics AG, Johan van den Acker Textielfabriek B.V., Mattes & Ammann GmbH & Co. KG, Pugi R.G. S.R.L., Spandauer Velours GmbH & Co. KG, SR Webatex GmbH / Getzner Textil AG, Swisstulle AG, Tessitura Mario Ghioldi & C. srl, Torcitura Fibre Sintetiche S.p.A., Torcitura Lei Tsu S.r.l., Vlnap a.s. / Wagenfelder Spinning Group, Wintex S.r.l., Mersem Teksil San. Ve Tic. Ltd. Sti, Teksko Kadife Kumas San. Ve Tic. A.S.

More information:
Trevira Heimtextil 2018 Frankfurt
Source:

Trevira GmbH                  

Hygienically Clean Healthcare TRSA®
Hygienically Clean Healthcare
04.08.2017

Up To Date Laundry Recertified Hygienically Clean Healthcare

Up To Date Laundry, Baltimore, has again achieved Hygienically Clean (HC) Healthcare certification, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.
Up-To-Date was first certified in 2014. Recertification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:
• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively

Up To Date Laundry, Baltimore, has again achieved Hygienically Clean (HC) Healthcare certification, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.
Up-To-Date was first certified in 2014. Recertification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:
• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively


To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and zero presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.
This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.


Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations by verifying quality control procedures in linen, uniform and facility services operations related to the handling of textiles containing blood and other potentially infectious materials.
Certified laundries use processes, chemicals and BMPs acknowledged by the federal Centers for Disease Control and Prevention (CDC), Centers for Medicare and Medicaid Services, Association for the Advancement of Medical Instrumentation, American National Standards Institute and others. Introduced in 2012, Hygienically Clean Healthcare brought to North America the international cleanliness standards for healthcare linens and garments used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.
Objective experts in epidemiology, infection control, nursing and other healthcare professions work with Hygienically Clean launderers to ensure the certification continues to enforce the highest standards for producing clean healthcare textiles.
“Congratulations to Up To Date Laundry on their recertification,” said Joseph Ricci, TRSA president and CEO. “This achievement proves their ongoing commitment to infection prevention and that their laundry facilities take every step possible to prevent human illness.”

Tindex GB Network Marketing & Communication
Tindex
01.08.2017

Delivering naturally advanced innovations @ MunichFabricStart

TINTEX presents a new and fresh campaign with contemporary images that signal the launch of the Autumn Winter 2019 Jersey collections presented by CEO Mario Jorge, who describes the new ‘Naturally Advanced’ position as moving on from making beautiful organics and natural materials to the next level with advanced hybrid nature/hi-tech smarts, with added value creativity, thanks to focused investments that will serve and secure our customer demands both now and in the seasons to come.


THE COLLECTION. Come and see the autumn range of more than 80 new qualities and style and discuss your own tailor made needs designed to fit the Fashion, Sportswear, Athleisure and Underwear sectors. The TINTEX Collection uses at least 60% of more sustainable materials, such as Tencel, Organic cotton, Naturally organic linen, recycled and recovered smart materials including polyesters, nylons and now a new recycled stretch elastane too. Out of preference, and in keeping with its ethos of creating low impact fabrics, the major part of the collection eschews the use of animal based fibers, with the limited exception of some organic wool, silk and cashmere blend qualities.

TINTEX presents a new and fresh campaign with contemporary images that signal the launch of the Autumn Winter 2019 Jersey collections presented by CEO Mario Jorge, who describes the new ‘Naturally Advanced’ position as moving on from making beautiful organics and natural materials to the next level with advanced hybrid nature/hi-tech smarts, with added value creativity, thanks to focused investments that will serve and secure our customer demands both now and in the seasons to come.


THE COLLECTION. Come and see the autumn range of more than 80 new qualities and style and discuss your own tailor made needs designed to fit the Fashion, Sportswear, Athleisure and Underwear sectors. The TINTEX Collection uses at least 60% of more sustainable materials, such as Tencel, Organic cotton, Naturally organic linen, recycled and recovered smart materials including polyesters, nylons and now a new recycled stretch elastane too. Out of preference, and in keeping with its ethos of creating low impact fabrics, the major part of the collection eschews the use of animal based fibers, with the limited exception of some organic wool, silk and cashmere blend qualities.

More information:
Tintex, campaign, Fashion
Source:

GB Network Marketing & Communication

Lectra and Armani Lectra
Lectra and Armani
11.07.2017

Lectra and Armani nurture young pattern-making talent

Lectra has developed partnerships with over 850 fashion schools across the world, providing them with solutions and expertise to help the teachers prepare students with the skills they require for the workplace. Working with leading education partners, Lectra organises regular student competitions in association with customers. The latest competition with Istituto Secoli, renowned for its pattern-making savoir-faire, and organized with Armani, is a clear example of industry and education working hand-in-hand to nurture young fashion designers.
Students at Istituto Secoli developed their collections using Lectra’s Modaris® and Diamino® solutions to create their patterns, prototypes and markers. In addition, students from the master’s program in menswear cut their creations with Vector®, Lectra’s state-of-the-art fabric cutting solution.

Lectra has developed partnerships with over 850 fashion schools across the world, providing them with solutions and expertise to help the teachers prepare students with the skills they require for the workplace. Working with leading education partners, Lectra organises regular student competitions in association with customers. The latest competition with Istituto Secoli, renowned for its pattern-making savoir-faire, and organized with Armani, is a clear example of industry and education working hand-in-hand to nurture young fashion designers.
Students at Istituto Secoli developed their collections using Lectra’s Modaris® and Diamino® solutions to create their patterns, prototypes and markers. In addition, students from the master’s program in menswear cut their creations with Vector®, Lectra’s state-of-the-art fabric cutting solution.


Thanks to the trusted relationship that Lectra has with its customer G.A. Operations of the Giorgio Armani group, one of the winning students, graduating in menswear, has the opportunity to take up an internship in the collection development department. "We were very pleased with Lectra's initiative and were delighted to offer educational internships at G.A. Operations. We chose the winning student for his creative skills and for his training on Modaris and Diamino. This gives us the important advantage of bringing somebody with proven technical skills into our team," stated Giorgio Ferremi, industrial director G.A. Operations at Trento.

More information:
Lectra, Armani, Parntership
Source:

Lectra

Hygienically Clean Certification TRSA
Hygienically Clean Certification
07.07.2017

Crescent Laundry Recertified Hygienically Clean Healthcare

Crescent Laundry, Davenport, Iowa, has again achieved Hygienically Clean (HC) Healthcare certification, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.
Crescent was first certified in 2014. Recertification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:
• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively

Crescent Laundry, Davenport, Iowa, has again achieved Hygienically Clean (HC) Healthcare certification, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.
Crescent was first certified in 2014. Recertification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:
• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively


Certified facilities pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and zero presence of yeast, mold and harmful bacteria. To maintain their certification, laundry plants must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities. Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations through testing and inspections that scrutinize quality control procedures in textile services operations related to the handling of textiles containing blood and other potentially infectious materials.

Source:

TRSA

ILUNA Group ILUNA Group
ILUNA Group
28.06.2017

ILUNA Group: Shaping Smart Intimate Wear Futures @ Interfiliere with ROICA™ by Asahi Kasei and STeP certification by Oekotex.

ILUNA Group and ROICA™ continue their close partnership to present the most “advanced” and responsible innovations to the market today. ILUNA GREEN LABEL lace collections made with premium stretch thanks to the use of the unique ROICA ™ Eco Smart GRS certified family- now offer the next evolution: a new stretch Galloon lace to be combined with mesh and lace fabrics collections, now fully made with GRS certified materials. This new evolution offers the right choice to contemporary consumers in products that are beautiful, high quality and sustainable.
This is in addition to a decision last year when the ILUNA GROUP converted all their stretch yarn exclusively to the unique ROICA™ Eco Smart family for all of its top of the range jacquardtronic and Textronic articles.
To reinforce this commitment, ILUNA can also celebrate its new STeP (Sustainable Textile Production) certification by Oeko-Tex, a certification that clarifies and communicates the company’s sustainable production commitment regarding manufacturing and processing to all its partners and customers in a transparent, clear manner.

ILUNA Group and ROICA™ continue their close partnership to present the most “advanced” and responsible innovations to the market today. ILUNA GREEN LABEL lace collections made with premium stretch thanks to the use of the unique ROICA ™ Eco Smart GRS certified family- now offer the next evolution: a new stretch Galloon lace to be combined with mesh and lace fabrics collections, now fully made with GRS certified materials. This new evolution offers the right choice to contemporary consumers in products that are beautiful, high quality and sustainable.
This is in addition to a decision last year when the ILUNA GROUP converted all their stretch yarn exclusively to the unique ROICA™ Eco Smart family for all of its top of the range jacquardtronic and Textronic articles.
To reinforce this commitment, ILUNA can also celebrate its new STeP (Sustainable Textile Production) certification by Oeko-Tex, a certification that clarifies and communicates the company’s sustainable production commitment regarding manufacturing and processing to all its partners and customers in a transparent, clear manner.
Fashion & ILUNA feature on the catwalk in Paris with the ‘Momenti Di Passione’ fashion show at the Interfiliere salon on 8th to 10th July. Here you will be able to enjoy a dazzling and exciting new range of bold ECO flocking beachwear & cover up.
And at the show, breakthrough fabric designs from ILUNA show a revolutionary quality in the new Burano collection: a range of decorative, macramé precious pattern effects that are diaphanous and semi-sheer styles that use at their heart the ROICA™ Eco Smart premium stretch family exclusively.

Source:

GB Network

TRSA TRSA
TRSA
28.06.2017

AmeriPride Plant in Memphis Recertified Hygienically Clean Healthcare

The certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that: • Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively
The Memphis laundry was first certified in 2014. AmeriPride has other U.S. Hygienically Clean Healthcare certified facilities in Little Rock, Ark.; Phoenix; Watkinsville, Ga.; Topeka, Kan.; Bemidji, Minneapolis and Twin Falls, Minn.; Springfield, Mo.; Omaha, Neb.; and Lubbock, Texas. The company’s Canadian Linen and Uniform Service facility in Lethbridge, Alberta, is also Hygienically Clean Healthcare certified.

The certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that: • Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively
The Memphis laundry was first certified in 2014. AmeriPride has other U.S. Hygienically Clean Healthcare certified facilities in Little Rock, Ark.; Phoenix; Watkinsville, Ga.; Topeka, Kan.; Bemidji, Minneapolis and Twin Falls, Minn.; Springfield, Mo.; Omaha, Neb.; and Lubbock, Texas. The company’s Canadian Linen and Uniform Service facility in Lethbridge, Alberta, is also Hygienically Clean Healthcare certified.
Certified facilities pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and zero presence of yeast, mold and harmful bacteria. To maintain their certification, laundry plants must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained.
This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.

Source:

TRSA®

Carboncast Carboncast
Carboncast
20.06.2017

CHOMARAT AND ALTUS GROUP PRESENT CARBONCAST

At the “Future of Composites in Construction” trade show, CHOMARAT and ALTUS GROUP are presenting CarbonCast®, their flagship line of reinforced-concrete prefabricated wall panels, reinforced with CHOMARAT’s C-GRID® carbon-fiber grids. A recent army-hospital project in Greenville, South Carolina is another success story of this innovative product: 18,600 m² (200,000 sq.ft) of precast insulated panels were installed in record time. Come and learn more about it at the McCormick Place Lakeside Center, Chicago, Stand C 10, on 20-22 June 2017.
“Reducing installation time, improving the fire and safety performance, increasing the service life of structures, and cutting energy consumption are crucial criteria in the choice of a CarbonCast solution,” explains ALTUS GROUP Executive Director John CARSON. CarbonCast® panels are classified ASHRAE 90.1. Thanks to the low thermal conductivity of carbon fiber, C-GRID® reinforced panels offer excellent thermal performance, providing uniform insulation and, therefore, a comfortable, energy-efficient building.

At the “Future of Composites in Construction” trade show, CHOMARAT and ALTUS GROUP are presenting CarbonCast®, their flagship line of reinforced-concrete prefabricated wall panels, reinforced with CHOMARAT’s C-GRID® carbon-fiber grids. A recent army-hospital project in Greenville, South Carolina is another success story of this innovative product: 18,600 m² (200,000 sq.ft) of precast insulated panels were installed in record time. Come and learn more about it at the McCormick Place Lakeside Center, Chicago, Stand C 10, on 20-22 June 2017.
“Reducing installation time, improving the fire and safety performance, increasing the service life of structures, and cutting energy consumption are crucial criteria in the choice of a CarbonCast solution,” explains ALTUS GROUP Executive Director John CARSON. CarbonCast® panels are classified ASHRAE 90.1. Thanks to the low thermal conductivity of carbon fiber, C-GRID® reinforced panels offer excellent thermal performance, providing uniform insulation and, therefore, a comfortable, energy-efficient building.

Source:

AGENCE APOCOPE

Schoeller Schöller Textil AG
Schoeller
13.06.2017

Exciting new developments from Schoeller at Outdoor Friedrichshafen

Schoeller Textil AG announces strategic cooperation at this year’s Outdoor in Friedrichshafen. At fair stand A4-402, visitors will experience the debut of Taurex® technology on Tuesday, 20 June, 2017. Tuesday, 20 June, 2017: Taurex® - a development from Red Bull and Schoeller Textil AG Red Bull and Schoeller are proud to unveil the jointly-developed Taurex®-finishing technology at Outdoor in Friedrichshafen. The Taurex® garment material and fabrics feature different types of fibers that encapsulate the essence of Red Bull into clothing – living up to claims of increased performance. The innovative Taurex® fabrics increase physical and mental performance capacity. Taurex® reflects the body’s energy back to the garment’s wearer. As a result, it provides improved wellbeing, greater concentration, reduced fatigue and speedy regeneration.

Schoeller Textil AG announces strategic cooperation at this year’s Outdoor in Friedrichshafen. At fair stand A4-402, visitors will experience the debut of Taurex® technology on Tuesday, 20 June, 2017. Tuesday, 20 June, 2017: Taurex® - a development from Red Bull and Schoeller Textil AG Red Bull and Schoeller are proud to unveil the jointly-developed Taurex®-finishing technology at Outdoor in Friedrichshafen. The Taurex® garment material and fabrics feature different types of fibers that encapsulate the essence of Red Bull into clothing – living up to claims of increased performance. The innovative Taurex® fabrics increase physical and mental performance capacity. Taurex® reflects the body’s energy back to the garment’s wearer. As a result, it provides improved wellbeing, greater concentration, reduced fatigue and speedy regeneration.
For some time now, Taurex® has been featured in the Red Bull clothing brand, AlphaTauri, but can now also be applied to other clothing brands, providing certain criteria are met. On 20 June, 2017, together with Red Bull staff, the Schoeller Competence Team provides detailed information on the Taurex® technology at the Schoeller fair stand A4-402.

More information:
Schöller, Outdoor
Source:

Schoeller Textil AG

Multicolor
Multicolor
11.06.2017

Sustainable and dramatically colored through and through

Upcycled products with ECONYL® yarn, mulesing-free wool and PFC-free bio technologies based on renewable raw materials, or bio foam, are just some of the ecological highlights of the Schoeller 2019 Summer Collection, developed and produced among the mountains of Switzerland. Polychrome effects lend exciting multicolors with richly-contrasting reverses and a new light membrane ensure an optimum body climate both for sports and in the city.
REGENERATED ECONYL® YARN Textiles with ECONYL® yarn made by Schoeller are genuinely upcycled products produced from regenerated waste material. The ECONYL® regeneration system reduces global waste by reclaiming reusable material from tips and oceans and returning it to the production cycle. The resulting yarn is indistinguishable from conventional yarn in terms of quality and appearance. The Schoeller ECONYL® fabric family encompasses a complete package with diverse exciting qualities such as ultra-light, bi-elastic schoeller®-dynamic (e.g. for windbreaker), very soft, fine schoeller®-dryskin (e.g. for high-tech sports) and a variety of light schoeller®-WB-400 weights.

Upcycled products with ECONYL® yarn, mulesing-free wool and PFC-free bio technologies based on renewable raw materials, or bio foam, are just some of the ecological highlights of the Schoeller 2019 Summer Collection, developed and produced among the mountains of Switzerland. Polychrome effects lend exciting multicolors with richly-contrasting reverses and a new light membrane ensure an optimum body climate both for sports and in the city.
REGENERATED ECONYL® YARN Textiles with ECONYL® yarn made by Schoeller are genuinely upcycled products produced from regenerated waste material. The ECONYL® regeneration system reduces global waste by reclaiming reusable material from tips and oceans and returning it to the production cycle. The resulting yarn is indistinguishable from conventional yarn in terms of quality and appearance. The Schoeller ECONYL® fabric family encompasses a complete package with diverse exciting qualities such as ultra-light, bi-elastic schoeller®-dynamic (e.g. for windbreaker), very soft, fine schoeller®-dryskin (e.g. for high-tech sports) and a variety of light schoeller®-WB-400 weights.

Source:

Schoeller Textil AG

Archroma Source: www.archroma.com
Archroma
07.06.2017

Archroma heads to outdoor for the first time with nature-focused ways to enhance gear

Under the motto: “Enhancing your gear, it’s our nature”, Archroma invites show visitors to discover how to:

Under the motto: “Enhancing your gear, it’s our nature”, Archroma invites show visitors to discover how to:


• Create exciting color effects – with solutions ranging from high-fast dyes Foron® S-WF, Nylosan® S, Printofix® TF, Drimaren® HF, and the new-in-range Foron® S luminous dyes, to EarthColors nature inspired biomass-waste based dyes, supported by Archroma’s Color Atlas color management service to boost your creativity;
• Make gear more resistant to extreme weather conditions from heatwaves to rain pours, with thermo-control and protection solutions, coldblack®, HyDry, Smartrepel®, Appretan® S and Sanitized®;
• Bring softness and comfort to your gear whilst looking good at all times, with Archroma’s fabric care effects Siligen®, Solusoft, Ceralube® and Arkofix®;
• Take a sustainability step up - with the new online ONE WAY calculator.
Visitors at the booth will also be able to discover the new fabric collection created by Flocus and colored with Archroma’s Earthcolors. Flocus is a company producing yarns, fillings and fabrics made from kapok fibers, for which they received the 2016 OutDoor Industry award in the Sustainable Innovation category.

Source:

 Archroma

Intertextile Pavillion Shenzhen Source: www.intertextileapparel.com
Intertextile Pavillion Shenzhen
06.06.2017

Top brand buyers sign-up to attend Intertextile Pavilion Shenzhen 2017

As the product development process in the apparel industry continues to speed up, producers are looking for new fabric and accessory options outside of the traditional sourcing seasons. As such, with its added advantage of being located in the core area of China’s fashion industry and nearby Hong Kong, the popularity and importance of July’s Intertextile Pavilion Shenzhen has been growing within the apparel market in recent years. A number of renowned international and domestic brands, such as DKNY, Embry, FILA, Initial, Nine West Group, Peacebird, s.Oliver and many more, have already signed-up to attend this year’s fair, where they will source from around nearly 700 exhibitors.

As the product development process in the apparel industry continues to speed up, producers are looking for new fabric and accessory options outside of the traditional sourcing seasons. As such, with its added advantage of being located in the core area of China’s fashion industry and nearby Hong Kong, the popularity and importance of July’s Intertextile Pavilion Shenzhen has been growing within the apparel market in recent years. A number of renowned international and domestic brands, such as DKNY, Embry, FILA, Initial, Nine West Group, Peacebird, s.Oliver and many more, have already signed-up to attend this year’s fair, where they will source from around nearly 700 exhibitors.


“Once again this edition we are putting significant effort into inviting VIP buyers and matching them with our exhibitors, so we know that many key brand buyers will source at the fair again,” said Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd. “Last year the feedback from these buyers, such as Diesel, DKNY, KINJI and Marc O’Polo, was that they are consistently seeking new materials to develop new products throughout the entire year, therefore, they find Intertextile Pavilion Shenzhen increasingly beneficial to them, particularly because of its timing and high quality of products.”
One buyer already confirmed to attend, DKNY, sent its Fabric Manager Mr Patrick Chan to visit the fair last year, who praised the experience after his trip. “I’m satisfied with the quality of the suppliers and their products. I’ve found some potential suppliers in the Fine Japan Zone and received some samples. They provide high-quality fabrics with good design,” he said.

Source:

Messe Frankfurt

JEC Group Source: www.agenceapocope.com
JEC Group
30.05.2017

Innovations that will change the future of Building and Construction to be rewarded at JEC Innovation Awards in Chicago, June 20-22, 2017

Composites use in Building and Construction will be highlighted at JEC newest event dedicated to this specific Composites Industry next month in Chicago, IL, USA. The numerous and diverse benefits that these innovative materials bring to the Building Industry will help overcome the coming challenges such as, urbanization, increase of natural disasters (floods, storms, tsunamis, earthquakes…), along with the decrease of non-renewable raw materials and the high standard levels set by the society in terms of lightness and fluidity. Composites Materials bring answers and opportunities to tackle those issues in sustainable, durable and reliable manners. Solutions like ease of fabrication (Owens Corning), structures durability (Biteam), anti-seismic reinforcement (DowAksa), use of end-of-life products such as recycled bottles of water (Premier Composites Technologies), aerial forms (Optima Projects Ltd) or again energy saving (Armageddon Energy).

Composites use in Building and Construction will be highlighted at JEC newest event dedicated to this specific Composites Industry next month in Chicago, IL, USA. The numerous and diverse benefits that these innovative materials bring to the Building Industry will help overcome the coming challenges such as, urbanization, increase of natural disasters (floods, storms, tsunamis, earthquakes…), along with the decrease of non-renewable raw materials and the high standard levels set by the society in terms of lightness and fluidity. Composites Materials bring answers and opportunities to tackle those issues in sustainable, durable and reliable manners. Solutions like ease of fabrication (Owens Corning), structures durability (Biteam), anti-seismic reinforcement (DowAksa), use of end-of-life products such as recycled bottles of water (Premier Composites Technologies), aerial forms (Optima Projects Ltd) or again energy saving (Armageddon Energy).


Following its strategy to address every Composites End-user, the JEC Innovation Awards will reward these 6 Composites Innovators in Building & Construction that will change the way we build.
If the majority of submissions relied on glass fibers, which is common in the Construction field, we see an increased interest in carbon fibers, especially for structural applications. And similarly to all sectors of the composite industry, thermoplastics are gaining in importance in Construction. Therefore, to promote the growing use of composites as a construction material, 6 categories are awarded, covering a large panel of applications and possibilities.

Source:

AGENCE APOCOPE

Teppich- Printer PhotoFabrics GmbH
Teppich- Printer
19.05.2017

Was gibt es neues bei Photofabrics ? Fachliche Informationen

Gemeinsam mit dem belgischen Unternehmen S-Print haben wir am Firmenstandort Oudenaarde in Ostflandern in eine der modernsten Druckanlagen investiert: in 3.000 Quadratmeter Produktionsfläche und eine Produktionsstraße von 56 Metern Länge - die modernste Druckanlage, die es derzeit auf dem Markt gibt.


Vorteile für Sie:
• Druck in CMYK: Mehr Farbnuancen als bisher, Schattierungen und Verläufe möglich


• Fotorealistische Drucke auf Teppich durch hochauflösende Bildmotive mit 400 dpi

• Mindestbestellmenge ab sofort nur noch zwei Quadratmeter

• Lieferzeit für jede Bestellung: höchstens 8 Tage


• Drucke auf schwierigen Materialien wie beispielsweise Filz oder Velours


• Neu: Drucke auf Wolle (Mindestbestellmenge 60 Quadratmeter)


• CMYK bedeutet eine Vereinfachung für unsere Webshop Kunden. Bilder können ohne weitere Bearbeitung bei uns gedruckt werden werden. Somit bieten wir ab jetzt ideale Vorrausetzungen für web-to-print. Gehören Sie zu den Ersten die diese Vorteile nutzen!

Gemeinsam mit dem belgischen Unternehmen S-Print haben wir am Firmenstandort Oudenaarde in Ostflandern in eine der modernsten Druckanlagen investiert: in 3.000 Quadratmeter Produktionsfläche und eine Produktionsstraße von 56 Metern Länge - die modernste Druckanlage, die es derzeit auf dem Markt gibt.


Vorteile für Sie:
• Druck in CMYK: Mehr Farbnuancen als bisher, Schattierungen und Verläufe möglich


• Fotorealistische Drucke auf Teppich durch hochauflösende Bildmotive mit 400 dpi

• Mindestbestellmenge ab sofort nur noch zwei Quadratmeter

• Lieferzeit für jede Bestellung: höchstens 8 Tage


• Drucke auf schwierigen Materialien wie beispielsweise Filz oder Velours


• Neu: Drucke auf Wolle (Mindestbestellmenge 60 Quadratmeter)


• CMYK bedeutet eine Vereinfachung für unsere Webshop Kunden. Bilder können ohne weitere Bearbeitung bei uns gedruckt werden werden. Somit bieten wir ab jetzt ideale Vorrausetzungen für web-to-print. Gehören Sie zu den Ersten die diese Vorteile nutzen!

Source:

PhotoFabrics GmbH

Merrow Sewing Machine Co Merrow Sewing Machine Co
Merrow Sewing Machine Co
18.05.2017

Merrow’s ActiveSeam Improves Products in the Medical Textile Sector with New Comfort Technology and the Merrow MB-4DFO-2.5 Sewing Machine

 ActiveSeam, Merrow's newest technology, is poised to revolutionize medical and compression garment manufacturing by replacing the traditional flatlock seam with a flatter, stronger stitch. The new Activeseam for Compression is set to be introduced in new product by a global medical device company in late 2017 or early 2018, leveraging Merrow's new MB-4DFO 2.5 series industrial sewing machine-- now available through regional distribution in 87 countries. Additionally, ActiveSeam is the world's first branded stitch, bringing a distinctive value to retail products.
Why is ActiveSeam great for medical and compression garments?

 ActiveSeam, Merrow's newest technology, is poised to revolutionize medical and compression garment manufacturing by replacing the traditional flatlock seam with a flatter, stronger stitch. The new Activeseam for Compression is set to be introduced in new product by a global medical device company in late 2017 or early 2018, leveraging Merrow's new MB-4DFO 2.5 series industrial sewing machine-- now available through regional distribution in 87 countries. Additionally, ActiveSeam is the world's first branded stitch, bringing a distinctive value to retail products.
Why is ActiveSeam great for medical and compression garments?


- With a flat profile and twice the stretch built into the seam, ActiveSeam garments are extraordinarily comfortable and do not restrict movement
- ActiveSeam replaces Flatlock with a stronger, more elastic, and infinitely more attractive seam construction that is ideal for specialized applications like Medical Compression garments
- When compared to a 6-thread flatlock seam with identical thread, fabric, and SPI, Merrow ActiveSeam 2 & 3-thread seams proved to be more than 30% stronger and had the ability to stretch (linear travel) 100% further
- ActiveSeam is almost undetectable when applied next to skin
- With more stretch built into the seam, the garment can be designed to fit the human body better without restricting athletic movement
ActiveSeam is uniquely suited for any application that entails a garment's seams be pressed against skin because of its extremely flat profile, flexibility, and unparalleled comfort. This is great news for anyone who utilizes compression wear, particularly compression garments or athletic apparel, as ActiveSeam substantially increases pliability and improves overall fit.

More information:
ActiveSeam, Merrow
Source:

Merrow Sewing Machine Co

Beaulieu International Group Beaulieu International Group
Beaulieu International Group
09.05.2017

Beaulieu Technical Textiles turns spotlight on extrusion coating & laminating capabilities at Techtextil 2017

 Technical textile producers are invited to discover the diverse finishing and innovative customisation opportunities possible with BTT’s advanced, fully automated line for Polypropylene (PP), Polyethylene (PE) and Polyester (PES) woven fabrics and nonwovens.
BTT’s extrusion coating process can apply a wide range of polymers as a liquid layer – one-sided, two-sided or multi-layer – to make a fabric printable and/or achieve specific protective and functional performance, including waterproofing, flame resistance and antistatic properties. Optional UV stabilisation is also offered. Transparent and white transparent, standard white and black, and coloured coating options are available. Coatings range from minimum 25-30 g/m² up to 450 g/m². As well as standard widths, BTT offers extensive possibilities to customise lengths and widths, with supplementary cutting provided on a separate line with up to 6 cutters in width.

 Technical textile producers are invited to discover the diverse finishing and innovative customisation opportunities possible with BTT’s advanced, fully automated line for Polypropylene (PP), Polyethylene (PE) and Polyester (PES) woven fabrics and nonwovens.
BTT’s extrusion coating process can apply a wide range of polymers as a liquid layer – one-sided, two-sided or multi-layer – to make a fabric printable and/or achieve specific protective and functional performance, including waterproofing, flame resistance and antistatic properties. Optional UV stabilisation is also offered. Transparent and white transparent, standard white and black, and coloured coating options are available. Coatings range from minimum 25-30 g/m² up to 450 g/m². As well as standard widths, BTT offers extensive possibilities to customise lengths and widths, with supplementary cutting provided on a separate line with up to 6 cutters in width.


In addition to extrusion coating, BTT is also equipped for extrusion laminating to support the production of composite structures.
Franky Viaene, Global Sales Manager Beaulieu Technical Textiles, comments: “As an established leader and driving force in technical textiles, Beaulieu Technical Textiles supports a wide range of customers in varied markets, and our expertise extends right through to the finishing process. Our in-house extrusion capabilities are available to external customers and we offer close technical collaboration to ensure the optimal treatment for the desired result for their application. We’re looking forward to discussing new possibilities for the industry to benefit from our support, starting at Techtextil.”

Source:

Beaulieu International Group