From the Sector

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The AGM was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 15, 2021, the independent proxy represented a total of 2 084 shareholders who hold 63.6% of the share capital.

The shareholders approved the proposal of the Board of Directors not to distribute a dividend in view of the negative business result. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2022.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional one-year term of office. Stefaan Haspeslagh was newly elected to the Board of Directors for a one-year term of office.

Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely the approval of the annual report, the financial statements and the consolidated financial statements for 2020, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review.

Outlook Updated
As already communicated at the Results Press Conference on March 9, 2021, Rieter expects the market recovery to continue in 2021. The company expects an order intake exceeding CHF 500 million in the first half of 2021. For the first half of 2021, Rieter still anticipates that sales will be below break-even point. For the full year 2021, Rieter expects an operating profit.

• Swiss weaving machinery manufacturers are in the forefront of novel application development

Shoes and electronic calculators are probably not the first products people would associate with the textile weaving process. But they certainly signpost the future for woven fabrics, as two examples of the ever-wider possibilities of latest technology in the field. Fashion and function already combine in the increasing popularity of woven fabrics for shoes, and this is a present and future trend. Calculators in fabrics? That’s another story of ingenious development, using so-called ‘meander fields’ on the back and keys printed on the front of the material.

These glimpses of the outlook for modern weavers are among the highlights of developments now being pioneered by Swiss textile machinery companies. All weaving markets require innovation, as well as speed, efficiency, quality and sustainability. Member firms of the Swiss Textile Machinery Association respond to these needs at every point in the process – from tightening the first thread in the warp to winding the last inch for fabric delivery. They also share a common advantage, with a leading position in the traditional weaving industry as well as the expertise to foster new and exciting applications.

Technology and research cooperation
The concept of a ‘textile calculator’ was developed by Jakob Müller Group, in cooperation with the textile research institute Thuringen-Vogtland. Müller’s patented MDW® multi-directional weaving technology is able to create the meander fields which allow calculator functions to be accessed at a touch. A novel and useful facility, which suggests limitless expansion.

Today, the latest woven shoes are appreciated for their precise and comfortable fit. They score through their durability, strength and stability, meeting the requirements of individual athletes across many sports, as well as leisurewear. Stäubli is well known as a leading global specialist in weaving preparation, shedding systems and high-speed textile machinery. Its jacquard machines offer great flexibility across a wide range of formats, weaving all types of technical textiles, lightweight reinforcement fabrics – and shoes.

It’s possible to weave new materials such as ceramics, mix fibers such as aramid, carbon and other, and produce innovative multi-layers with variable thicknesses. Such applications put special demands on weaving machines which are fulfilled by Stäubli high-performance TF weaving systems.

Great weaving results are impossible without perfect warp tension, now available thanks to the world-leading electronic warp feeding systems of Crealet. Some market segments in weaving industry today demand warp let-off systems which meet individual customer requirements. For example, the company has recognized expertise to understand that geotextile products often need special treatment, as provided by its intelligent warp tension control system. Individual and connective solutions are designed to allow external support via remote link. Crealet’s warp let-off systems are widely used in both ribbon and broadloom weaving, for technical textiles applied on single or multiple warp beams and creels.

Functional, sustainable, automated
Trends in the field of woven narrow fabrics are clearly focused on functionality and sustainability. The Jakob Müller Group has already embraced these principles – for example using natural fibers for 100% recyclable labels with a soft-feel selvedge. It also focuses as much as possible on the processing of recycled, synthetic materials. Both PET bottles and polyester waste from production are recycled and processed into elastic and rigid tapes for the apparel industry.

For efficient fabric production environments, it is now recognized that automated quality solutions are essential. Quality standards are increasing everywhere and zero-defect levels are mandatory for sensitive applications such as airbags and protective apparel.

Uster’s latest generation of on-loom monitoring and inspection systems offers real operational improvements for weavers. The fabric quality monitoring prevents waste, while the quality assurance system significantly improves first-quality yield for all applications. Protecting fabric makers from costly claims and damaged reputations, automated fabric inspection also removes the need for slow, costly and unreliable manual inspection, freeing operators to focus on higher-skilled jobs.

Smart and collaborative robotics (cobots) offer many automation possibilities in weaving rooms. Stäubli’s future oriented robotics division is a driver in this segment with first effective installations in warp and creel preparation.

Control and productivity
Willy Grob’s specialized solutions for woven fabric winding focus on reliable control of tension, keeping it constant from the start of the process right through to the full cloth roll. Continuous digital control is especially important for sensitive fabrics, while performance and productivity are also critical advantages. In this regard, the company’s large-scale batching units can provide ten times the winding capacity of a regular winder integrated in the weaving machine.

The customized concept by Grob as well as design and implementation result in great flexibility and functionality of the fabric winding equipment – yet another example of Swiss ingenuity in textile machinery.  
There is even more innovation to come in weaving – and in other segments – from members of the Swiss Textile Machinery Association in future! This confident assertion is founded on an impressive statistic: the 4077 years of experience behind the creative power of the association’s member firms. It’s proof positive that their developments grow out of profound knowledge and continuous research.

JEC SUMMIT SPORTS & HEALTH – CONNECT, the new online event platform devoted to medical and sports equipment composites manufacturers, unveils some of the programs available online December 8 to 10.

Starting on December 8, professionals from all the composites value chain across the globe will be able to meet online, network, and build long-lasting relationships thanks to the JEC Summit Sport & Health. The event goal is to allow decision-makers to learn about the current challenges and opportunities of the sports and medical fields, this thanks to the three-day program integrating industry sessions, workshops, startups, and business meetings.

Each day, industry decision-makers using composites will come together to discuss the latest developments in composites in sports and medical fields through a set of keynotes and industry sessions. Each session will be followed by panel discussions over a variety of business-angled topics. Workshops from individual sponsors with clients will give an extensive overview of the current technological trends in the sports and medical fields and offer an outlook on developing production lines in these fields. A selection of the most exciting startups in these fields will pitch their innovations and glance at the industry's future. Finally, pre-arranged online business meetings will be set up to network with industry buyers and decision-makers from the entire composites' value-chain.

Each day of the summit will be composed of five major moments as-is:

• A keynote speech led by one or two high profile experts
• An industry session: a discussion between two experts in medical or sporting devices fields
• A Startup pitches session during which each startup will introduce its product or innovation,
• Workshops,
• And Business meetings

Please see attached document for more information and dates.

• All motions approved
• Dividend of CHF 4.50 agreed
• COVID-19

In relation to participation in the Annual General Meeting on April 16, 2020, the Board of Directors of Rieter Holding Ltd. arranged exclusively written or electronic voting and the granting of power of attorney to the independent proxy. In taking this approach, the Board of Directors relied on Article 6a, lit. b of Ordinance 2 of the Swiss Federal Council (Measures to Combat the Coronavirus of March 16, 2020). Physical participation by the shareholders was therefore not possible. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 16, 2020, the independent proxy represented a total of 2 025 shareholders who hold 64.3% of the share capital.

A dividend of CHF 4.50 per share was agreed. The shareholders approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2021.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Michael Pieper, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional one-year term of office.
Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely approval of the annual report, the financial statements and the consolidated financial statements for 2019, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review. In addition, the authorized capital was extended for a further two years.

COVID-19
At present, it is not possible to predict how the global COVID-19 pandemic will affect Rieter’s sales and earnings in the first and second half of 2020, and thus also for 2020 as a whole.

Rieter therefore refrains from providing an outlook for financial year 2020 and will issue the relevant information as part of the semi-annual report on July 16, 2020.
The company has taken the necessary measures to protect employees and to meet commitments to customers as far as possible.

Thanks to long-standing customer relationships, a focus on innovation, global positioning and the company’s financial stability, Rieter will successfully overcome the challenges.

Within the framework of the preparations for the Group annual financial statements and based on preliminary results, SGL Carbon confirms its guidance for 2019 as revised in October 2019. Accordingly, the Company continues to expect Group sales between €1.05 and €1.1 billion and Group EBIT before extraordinary items between €45 and 50 million. In addition, net financial debt as of December 31, 2019 has also developed as expected, increasing by a mid double digit million € amount and thus remaining below the €300 million mark.

SGL Carbon also confirms the initial outlook for 2020 as presented in October 2019. Group sales is anticipated slightly below the 2019 level and Group EBIT before extraordinary items 10-15% below the 2019 level. To reflect the lower earnings expectations and within the context of a conservative free cash flow management, the Company will restrict capital expenditures to €70-80 million in 2020 (previous guidance: approximately €100 million) and thus approximately on the level of depreciation.

As usual, SGL Carbon will communicate further details on the guidance for 2020, particularly relating to the guidance on the level of the reporting segments, with the publication of the annual report 2019 on March 12, 2020.

The Company will also publish statements on the new mid-term plan on this date.

Deterioration in market segments Textile Fibers and Industrial Applications in the business unit CFM will be counteracted with various measures; strategic growth markets remain intact

• Continued weakness in the business unit Composites – Fibers & Materials (CFM) in the final quarter of 2019 due to the further weakening in the market segment Textile Fibers as well as the deteriorated economic environment in the market segment Industrial Applications leads to a guidance adjustment for the full year 2019
• Earnings deterioration at CFM triggers an impairment testing; impairment charge will become necessary
• Initial outlook for 2020
• Comprehensive measures initiated to improve earnings of the CFM business unit
• CFM strategic growth markets automotive and aerospace remain intact
• Growth in higher-margin aerospace business to be accelerated

While the preliminary results for the first nine months 2019 remain, overall, within the scope of the full year outlook outlined in the ad-hoc notification of August 14, 2019 (preliminary 9M/2019 recurring EBIT: Group: approx. €54 million, CFM: approx. minus €2 million, GMS: approx. €71 million, Corporate: approx. minus €15 million), continued weakness is becoming apparent for the final quarter 2019 in the reporting segment Composites – Fibers & Materials (CFM). This is due to the further weakening in the market segment Textile Fibers as well as the deteriorated economic environment in the market segment Industrial Applications.

SGL Carbon therefore now expects for the full year 2019 a recurring EBIT in the reporting segment CFM in a negative mid to high single digit million € amount (previous guidance: positive mid-single digit million € amount). This results in a Group recurring EBIT for the full year 2019 in the magnitude of €45 to 50 million (previous guidance: approx. €55 million).

The earnings deterioration at CFM triggers an impairment testing. Based on the preliminary status of the new five-year plan, a non-cash impairment charge of €70 to 80 million is becoming apparent in CFM mainly due to the lower starting point in 2019 as well as the ongoing weakness in the market segments Textile Fibers and Industrial Applications. This impairment charge will be recorded in the third quarter 2019. In recent years acquired assets of the former joint ventures with BMW and Benteler are not affected by this impairment.

• Order intake in the first• Order intake in the first half of 2019 amounted to CHF 378.3 million, 26% below the previous year period
• At CHF 416.1 million, sales were 19% down on the previous year period
• EBIT of CHF -1.2 million and net profit of CHF -3.8 million
• Implementation of cost-cutting measures proceeding according to plan
• Innovations successfully launched at ITMA 2019 in Barcelona
• Major order from Egypt signed – worth around CHF 180 million
• Completion of real estate sale in Ingolstadt (Germany) expected in the third quarter 2019
• Outlook unchanged compared to spring 2019

In the first half of 2019, Rieter posted an order intake of CHF 378.3 million (first half year 2018: CHF 511.8 million). This represents a decline of around 26% compared to the previous year period. As already reported, the main reason was low demand in the new machinery business (Business Group Machines & Systems: -34%). Rieter understands that market share remained unchanged at the previous year’s level of around 30%. Order backlog as at June 30, 2019 was CHF 295 million (December 31, 2018: CHF 325 million).

DOMO Chemicals, a global leader in the field of material engineering will discuss economic and environmental challenges at the 2019 Wood Mackenzie European Nylon Conference in Frankfurt am Main, Germany from March 5 to 7.

Ron Bult, Director of Global Sales of DOMO Engineering Plas-tics will highlight solutions based on ECONAMID®, a family of PA6 & PA66 compounds based on sustainable post-industrial feedstock derived either from film manufactur-ing or from fiber and yarn manufacturing. Depending on the applications and the desired level of physical and mechanical properties, DOMO can provide grades that are unfilled, mineral filled, glass-fiber filled, or carbon-fiber filled.

“DOMO is making major efforts to accelerate the development of sustainable solu-tions that bring value to our customers’ businesses, while acting responsibly towards the environment, employees and communities,” says Bult.

Also at the conference, Philippe Guerineau, VP Sales & Marketing in the company’s Nylon & Intermediates business unit, will join a panel discussion at the conference to discuss on the economic outlook and the future of the polyamide industry. DOMO will be holding consultations and exclusive events for its customers as well.

What does the furniture market look like and what potential composites offer for the furniture of today and tomorrow? The AZL is investigating this question together with companies from the composite and furniture industry. The result will be an overview of the current market and the materials used to date as well as an outlook on future mass applications for fiber-reinforced plastics (FRP). The study is open to interested companies and starts with a kick-off meeting at Composites Europe in Stuttgart on November 7th, 2018.

Furniture, its design and function have undergone major changes in recent decades: From robust lifelong companions to trend-setting models, from handmade one-of-a-kind pieces to mass products, from storage objects to multi-functional and “smart” all-rounders. This goes along with an increased diversity in terms of design and the materials used – and high potential for composites that offer additional design freedom and exceptional mechanical properties at low weight.

Study provides overview of furniture market and unique selling points of composites
In order to systematically identify the potential of fiber-reinforced composites and to use them in future furniture applications, the AZL is starting a study together with companies from the furniture and composite industry. Within four and a half months the market for furniture will be segmented, design and technology trends will be identified and the technical requirements for furniture and furniture components will be broken down to identify applications with high potential for composites. The overall goal is to understand the selection process and needs of the furniture designer in order to bring composites to the market as a targeted alternative to conventional materials.

Virginia Bozsak, Technical Manager Composites at ARKEMA Innovative Chemistry is participating in the study: “The ever-growing population number requires environmentally friendly material and a solution for the end of life treatment to recollect and reuse materials. For fast changing markets such as the furniture market, these materials also need to offer an enormous freedom of design. Arkema already answers this demand with the only liquid thermoplastic resin Elium® used as a thermoset resin to produce composite structural or aesthetical parts. With the joint study, we aim to identify specific applications in the furniture market to make use of material which is not limiting creativity or design specifications but rather enabling the future to be revolutionized.”

India is a very important market for the German textile machinery industry, with an export of more than €255 million (+ 8 %) in 2017. Many German machinery builders have longstanding relations with Indian customers and quite a number of them also provide production plants and training centres in India. Not surprisingly, about 370 decision-makers and experts from the textile and nonwoven related industry attended the VDMA conference and B2B event called “German Technology meets Indian Textiles and Nonwovens” in Mumbai on 15-16 May 2018 (www.germantech-indiantextile.de).

According to a survey, both the event and German textile machinery engineering received the highest marks among the visitors. About 57 % of the visitors stated very good and 38 % good experience with machines and components from German suppliers. The performance and service promise as well as the high-quality standards have made German machine suppliers as most reliable partners in India and other countries. This positive result has by far not been reached by any other manufacturing nation from Europe or Asia. Asked for future processes, investments in technical textiles and/or nonwoven production seem to be the most favorite sectors in India. Around 74 % of the visitors plan to expand their production capacities with new machines and components whereas 26 % intend to replace old machinery by new machines and components. High productivity, after-sales service, end-product quality, low operating and acquisition costs are the decisive machine procurement criteria in this order. The investments plans are based on a positive business and investment outlook in India. 45 % of the visitors surveyed plan to invest more than 10 % within the next 12 months and 30 % up to 10 %. 25 % of the visitors expect a sales increase by more than 10 % for the next 12 months and 60 % anticipate a sales growth of up to 10%.

Considering this positive business climate and the high interest from the Indian industry, the 32 well-known VDMA members participated in the conference have good chances to offer the right technologies and to place new orders. The presented technology topics along the entire textile value chain will help the Indian industry to fulfill their expansion plans and to meet the challenges such as rising salary costs and shortage of labor in industrial regions. The major cutting-edge topics of the conference program were as follows:

•    Higher profits throughout the entire textile value chain
•    Energy, material, water and dyestuff savings for an environmentally friendly production
•    New applications such as technical textiles, nonwovens (e. g. hygiene products) or home textiles (e. g. terry towels)
•    Automation, industry 4.0, digital communication and smart factory solutions
•    Quality improvements e. g. with measurement and control systems
•    Lower investment costs in spinning preparation with integrated draw frames
•    New technologies to combine spinning and knitting
•    Smart textiles and added value products e. g. with embroidery machines

Whereas the event on 15-16 May 2018 focused on customers, a training session at the prestigious Veermata Jijabai Technological Institute VJTI in Mumbai on 17 May 2018 was addressed to future engineers. More than 220 textile manufacturing and mechanical engineering students followed the technical presentations. The VDMA's contribution to improve the education of future customers and partners was very much appreciated.