From the Sector

Reset
318 results
30.08.2021

Biden Administration Awards $6.5M Contract to US Cotton LLC

  • Ramping Up Production of American-Made Polyester Tipped Swabs

The Biden Administration has awarded a contract for $6.5 million to U.S. Cotton LLC, the largest manufacturer of cotton swabs in the United States, to increase domestic production capability for polyester tipped swabs for home testing kits and mass testing applications to fight the COVID-19 pandemic.  Since the beginning of the pandemic, U.S. Cotton has retooled operations to produce over 400 million COVID testing kit swabs.

The Department of Defense (DOD), in coordination with the Department of Health and Human Services (HHS), announced the award today as part of the administration’s broader effort to increase domestic production capability for essential medical supplies.

U.S. Cotton, based in Cleveland, Ohio, said the company will increase its production capacity from 92 million polyester swab tips per month to approximately 371 million polyester swab tips per month by May 2022 to support domestic COVID-19 testing. The DOD contract award was funded through the American Rescue Plan Act (ARPA) to support the domestic industry base expansion for critical medical resources.

  • Ramping Up Production of American-Made Polyester Tipped Swabs

The Biden Administration has awarded a contract for $6.5 million to U.S. Cotton LLC, the largest manufacturer of cotton swabs in the United States, to increase domestic production capability for polyester tipped swabs for home testing kits and mass testing applications to fight the COVID-19 pandemic.  Since the beginning of the pandemic, U.S. Cotton has retooled operations to produce over 400 million COVID testing kit swabs.

The Department of Defense (DOD), in coordination with the Department of Health and Human Services (HHS), announced the award today as part of the administration’s broader effort to increase domestic production capability for essential medical supplies.

U.S. Cotton, based in Cleveland, Ohio, said the company will increase its production capacity from 92 million polyester swab tips per month to approximately 371 million polyester swab tips per month by May 2022 to support domestic COVID-19 testing. The DOD contract award was funded through the American Rescue Plan Act (ARPA) to support the domestic industry base expansion for critical medical resources.

John Nims, President of U.S. Cotton said, “We are proud to be involved in a national effort to help deploy these testing kit swabs for the American people. These swabs are designed to make it easier for people at home to self-administer coronavirus tests and will also be used for mass testing applications, which is critically important. We greatly appreciate the collaboration with DOD and HHS to ramp up essential capacity of polyester-based synthetic swabs that will help in the fight against the pandemic.

“We continue to step up to meet our nation’s critical need for American-made coronavirus testing kit swabs on a massive scale. It is an honor to work with our government to help fight this pandemic and use our innovative technologies based here in the United States to fill a national and global demand for testing kits. I especially want to thank Senator Brown and Senator Portman for all their incredible support to help us retool and expand our operations in Cleveland. We can’t thank them enough for their tireless work and also want to recognize their hard working staff. As the Delta variant surges across the country, this timely investment will help in the fight against COVID by adding this much-needed, long-term surge capacity.”

Kim Glas, President and CEO of NCTO, said, “We want to sincerely thank President Biden, the Department of Defense, and the Department of Health and Human Services for leading this critical industrial expansion effort. We appreciate the administration’s commitment to expand the U.S. industrial base for these essential products.  We have a once-in-a-generation opportunity to onshore these critical supply chains long-term and we look forward to working with the administration and Congress to advance long-term solutions.”

More information:
corona virus NCTO
Source:

NCTO

3D-Lofter. Photo: (c) DiloGroup
26.08.2021

DiloGroup at INDEX

After a long break, the international nonwovens industry will meet again in Geneva, Switzerland, from October 19 to 22, 2021 on the occasion of INDEX. DiloGroup offers tailormade production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further by using the new needle pattern 8000X which is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

After a long break, the international nonwovens industry will meet again in Geneva, Switzerland, from October 19 to 22, 2021 on the occasion of INDEX. DiloGroup offers tailormade production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further by using the new needle pattern 8000X which is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

The “3D-Lofter” which was first presented during ITMA 2019 in Barcelona offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts are two examples for this technology which explores new application areas for needlefelts The 3D-Lofter technology may also be used “inverted” for filling up bad spots in web mats and thus achieves a better homogeneity of e. g. spunlace, thermobond or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

Apart from machines for needling technology we offer in cooperation with partner companies also production lines including thermobonding and hydroentangling components.

More information:
DiloGroup Dilo INDEX
Source:

DiloGroup

16.08.2021

Rieter Board of Directors: Dismissals and Criminal Complaint

As the Rieter Holding Ltd. Announced, during the course of the acquisition of three Saurer businesses’, it came to serious violations of the statutory duty of loyalty, the obligation to maintain business secrets and the Rieter Code of Conduct by two members of the Board of Directors. They are said to have misused information internal to the Board of Directors in order to compete with Rieter through an offer of their own.

The Board of Directors considers this to be a strong violation of Rieter’s interests, to the detriment of all of its stakeholders, and a sustained breach of the relationship of trust within the Board of Directors which makes further cooperation impossible.

Therefore, the Board of Directors of Rieter Holding Ltd. intends to convene an Extraordinary General Meeting to dismiss these members. Furthermore, to protect Rieter’s interests, the Board of Directors will file a criminal complaint against them.

As the Rieter Holding Ltd. Announced, during the course of the acquisition of three Saurer businesses’, it came to serious violations of the statutory duty of loyalty, the obligation to maintain business secrets and the Rieter Code of Conduct by two members of the Board of Directors. They are said to have misused information internal to the Board of Directors in order to compete with Rieter through an offer of their own.

The Board of Directors considers this to be a strong violation of Rieter’s interests, to the detriment of all of its stakeholders, and a sustained breach of the relationship of trust within the Board of Directors which makes further cooperation impossible.

Therefore, the Board of Directors of Rieter Holding Ltd. intends to convene an Extraordinary General Meeting to dismiss these members. Furthermore, to protect Rieter’s interests, the Board of Directors will file a criminal complaint against them.

Source:

Rieter Holding AG

(c) SANITIZED
04.08.2021

New CEO at SANITIZED AG: Michael Lüthi succeeds Urs Stalder

Michael Lüthi, a member of the founding family, will become the CEO of the SANITIZED company group on August 1, 2021. He will take over the position from Urs Stalder, who will join the administrative board after working for the company for over 30 years.

Longtime CEO Urs Stalder consistently promoted the brand Sanitized®. Furthermore, he managed to internationalize the company, establish subsidiaries in the U.S., China and India, and focus on innovative products.

The 38-year-old business economist Michael Lüthi has been working for SANITIZED since 2018. He previously worked as COO of Senevita, a company that at the time had roughly 30 residences, and he supervised residential complexes for seniors with roughly 2,500 employees. Over the past three years, Michael Lüthi was already a member of SANITZED’s management team and helped to shape the course of the company.

Michael Lüthi, a member of the founding family, will become the CEO of the SANITIZED company group on August 1, 2021. He will take over the position from Urs Stalder, who will join the administrative board after working for the company for over 30 years.

Longtime CEO Urs Stalder consistently promoted the brand Sanitized®. Furthermore, he managed to internationalize the company, establish subsidiaries in the U.S., China and India, and focus on innovative products.

The 38-year-old business economist Michael Lüthi has been working for SANITIZED since 2018. He previously worked as COO of Senevita, a company that at the time had roughly 30 residences, and he supervised residential complexes for seniors with roughly 2,500 employees. Over the past three years, Michael Lüthi was already a member of SANITZED’s management team and helped to shape the course of the company.

“We will continue to combine tradition and innovation: SANITIZED is a fourth-generation Swiss family company, and we will continue to expand our leadership position in the world with our safe and innovative products and services for the textile, polymer, and paint industries,” explains the new SANITIZED CEO Michael Lüthi. American company Consolidated Pathways was recently acquired with this objective in mind. SANITIZED now has a presence with its own subsidiaries in the U.S., China, the European Union, and India.

Source:

PR Heinhöfer für Sanitized AG

04.08.2021

Lenzing: Earnings more than doubled in the first half of 2021

  • Strong operating result: EBITDA at EUR 217.8 mn, cash flow from operating activities at EUR 199.8 mn
  • Major strategic projects continue fully on track – production start of the lyocell plant in Thailand in the fourth quarter of 2021
  • Start of strategic cooperation agreement for textile recycling with Södra
  • New milestones in the implementation of group-wide carbon neutrality: EUR 200 mn investment in existing locations in Asia
  • Guidance 2021: Lenzing expects EBITDA of at least EUR 360 mn

The Lenzing Group reported a significant improvement in revenue and earnings in the first half of the year. Growing optimism in the textile and apparel industry and the ongoing recovery in retail caused a substantial increase in demand and prices on the global fiber market, in particular at the beginning of the current financial year.

  • Strong operating result: EBITDA at EUR 217.8 mn, cash flow from operating activities at EUR 199.8 mn
  • Major strategic projects continue fully on track – production start of the lyocell plant in Thailand in the fourth quarter of 2021
  • Start of strategic cooperation agreement for textile recycling with Södra
  • New milestones in the implementation of group-wide carbon neutrality: EUR 200 mn investment in existing locations in Asia
  • Guidance 2021: Lenzing expects EBITDA of at least EUR 360 mn

The Lenzing Group reported a significant improvement in revenue and earnings in the first half of the year. Growing optimism in the textile and apparel industry and the ongoing recovery in retail caused a substantial increase in demand and prices on the global fiber market, in particular at the beginning of the current financial year.

Revenue rose by 27.5 percent to EUR 1.03 bn in the first half of 2021. This increase is primarily attributable to higher viscose prices, which stood at more than RMB 15,000 in May thanks to significantly higher demand for fibers, especially in Asia. The focus on wood-based specialty fibers such as TENCEL™, LENZING™ ECOVERO™ and VEOCEL™ branded fibers also had a positive impact on the revenue development; the share of specialty fibers in fiber revenue rose to 72.8 percent in the reporting period. The negative impact of more unfavorable currency effects was consequently more than offset.

The earnings development essentially reflects the positive market development and was additionally reinforced by measures to improve efficiency. Energy and logistics costs increased significantly throughout the entire reporting period. EBITDA (earnings before interest, tax, depreciation and amortization) more than doubled and amounted to EUR 217.8 mn in the first half of 2021 (compared to EUR 95.6 mn in the first half of 2020). The EBITDA margin rose from 11.8 percent to 21.1 percent. Net profit for the period amounted to EUR 96.1 mn (compared to a net loss of EUR minus 14.4 mn in the first half of 2020) and earnings per share to EUR 3.06 (compared to EUR 0.06 in the first half of 2020).

“Lenzing had a very strong first half-year. The demand for our sustainably produced specialty fibers once again developed excellently,” says Stefan Doboczky, CEO of the Lenzing Group.

Source:

Lenzing AG

21.07.2021

Devan: Supporting elite sport with ‘cool comfort technology’ Moov&Cool.

Devan Chemicals has been supporting high performance sport in the UK and Belgium with its ‘cool comfort technology’ Moov&Cool.

Worldwide, hot temperatures are a new reality that brings extra challenges for athletes. Thermoregulation technology is becoming more and more important in order for athletes to perform at their best on the pinnacle of sports.

Working alongside the English Institute for Sport (EIS) and Sally Cowan Ltd, the technology is being applied to garments with the aim of improving the thermal comfort of elite athletes.

Moov&Cool consists of a multi-functional polymer technology that proposes to absorb heat during performance and improve the moisture management properties of the fabric. The treatment has been designed to simultaneously react to sweat build up and heat emission.

Devan Chemicals has been supporting high performance sport in the UK and Belgium with its ‘cool comfort technology’ Moov&Cool.

Worldwide, hot temperatures are a new reality that brings extra challenges for athletes. Thermoregulation technology is becoming more and more important in order for athletes to perform at their best on the pinnacle of sports.

Working alongside the English Institute for Sport (EIS) and Sally Cowan Ltd, the technology is being applied to garments with the aim of improving the thermal comfort of elite athletes.

Moov&Cool consists of a multi-functional polymer technology that proposes to absorb heat during performance and improve the moisture management properties of the fabric. The treatment has been designed to simultaneously react to sweat build up and heat emission.

In Belgium, Devan has been involved in the Gold2Gold project carried out by Sport Vlaanderen. Gold2Gold is a unique collaboration between sports, government and the industry to prepare Belgian athletes to perform better in hot environments during world-level championships. Thermoregulating technology is increasingly becoming a key aspect of endurance performance for elite athletes. At that top level, small differences in body core temperature can make the difference between being on the podium or sometimes not even finishing the race.

Source:

Devan Chemicals NV / Marketing Solutions NV

(c) Schoeller Textil AG
19.07.2021

Change in leadership at Schoeller Textil AG: Kath succeeds Winkelbeiner

Schoeller Textil AG, the Swiss textile and technology company, announces a shift in leadership as Joachim Kath takes over as CEO. Following a 10-year career at the global textile solutions brand, CEO Siegfried Winkelbeiner is moving into his retirement later this month. Joachim Kath, who comes from the chemical industry, has been working closely with Winkelbeiner as COO at Schoeller for the past year and a half.

Schoeller Textil AG, the Swiss textile and technology company, announces a shift in leadership as Joachim Kath takes over as CEO. Following a 10-year career at the global textile solutions brand, CEO Siegfried Winkelbeiner is moving into his retirement later this month. Joachim Kath, who comes from the chemical industry, has been working closely with Winkelbeiner as COO at Schoeller for the past year and a half.

The transition comes after long-term planning. Since February 2020, and in close partnership with Siegfried Winkelbeiner, Joachim Kath (on the left) has been preparing as Schoeller COO to take over its management. Joachim Kath originally comes from Flensburg (DE) and, following his studies of Chemical Engineering in Karlsruhe, shaped his professional career in the chemical industry with Ciba (-Geigy) / BASF in Basel (CH). His career over 30 years has incorporated engineering, production and marketing & sales in diverse management functions – in a wide range of business segments for various industries and areas of application around the globe. Joachim Kath spent 12 years of his career dedicated to textile finishing, with a period of intensive travel in Asia and a 3-year stay in the USA.

Asked how he sees himself, Joachim Kath said: “The common thread running through all my assignments and business activities is process orientation, interest in new paths, and an instinct for what is feasible – with the goal of achieving customer benefits and satisfaction. Kath aims to ensure that Schoeller can continue to face the challenges of changing market requirements with outstanding and exceptional products, while evolving and innovating to stay ahead of consumer needs for the future. High performance capability, sustainable product development, premium quality, reliability, productivity, and keeping the customer as the central focus of all activities continue as essential keys to Schoeller’s continued business success.

Source:

Schoeller Textil AG

Hexcel showcases Carbon Fiber Prepreg Capability for UAV Applications (c) Hexcel Corporation
07.07.2021

Hexcel showcases Carbon Fiber Prepreg Capability for UAV Applications

Hexcel, a global leader in advanced composites technologies, announces the successful maiden flight of a lightweight camera drone, developed using Hexcel HexPly® carbon fiber prepregs. The composite drone was developed by a team of students from the University of Applied Sciences Upper Austria in Wels with composite materials supplied by Hexcel Neumarkt in Austria.

A team of six students in the university’s lightweight construction and composite materials course was responsible for the complete design, engineering, and manufacture of the camera drone over a period of 18 months. Hexcel materials and optimization of the composite engineering enabled the team to reduce the composite structural mass by an impressive 42% compared to similar drones.

Hexcel, a global leader in advanced composites technologies, announces the successful maiden flight of a lightweight camera drone, developed using Hexcel HexPly® carbon fiber prepregs. The composite drone was developed by a team of students from the University of Applied Sciences Upper Austria in Wels with composite materials supplied by Hexcel Neumarkt in Austria.

A team of six students in the university’s lightweight construction and composite materials course was responsible for the complete design, engineering, and manufacture of the camera drone over a period of 18 months. Hexcel materials and optimization of the composite engineering enabled the team to reduce the composite structural mass by an impressive 42% compared to similar drones.

Hexcel Neumarkt was one of eight industrial partners supporting the university team throughout the project, providing all carbon fiber prepreg materials used for the drone’s landing gear as well as the fuselage. The ultra-lightweight 32g landing gear was laid up and cured in the press, whereas the fuselage was autoclave cured by the student team using Hexcel HexPly M901 and HexPly M78.1 prepreg resin systems with a combination of woven and unidirectional carbon fiber reinforcements.

With the development of Unmanned Aerial Vehicles (UAV) as a key emerging market and innovation space in the transportation sector, Hexcel’s collaboration with the University of Applied Sciences Upper Austria team not only creates an important link with the next generation of lightweight composite engineers but also highlights the weight saving and structural benefits of Hexcel composite material solutions.

"The massive weight saving achieved with their updated version of the camera drone is a fantastic achievement by the student team," said Michael Rabl, Dean of FH Wels of the Upper Austria University of Applied Sciences. "The joint study not only illustrates the wide range of complex and innovative composite techniques present in the drone sector but also presents the opportunities that exist for further development in the wider Urban Air Mobility (UAM) and aerospace composites markets.”

Hexcel congratulates the project team which includes Lukas Weninger, Karl-Heinz Schneider, Jakob Schlosser, Matthias Thon, Marla Unter, and Simone Hartl on an exceptional piece of lightweight composite design and thanks them for showcasing the contribution of Hexcel materials with a presentation and drone flight. Johanna Arndt, research and technology group leader at Hexcel Neumarkt, said, “It was a great pleasure to work with the team who were very cooperative and self-motivated to succeed. Watching the drone just fly around the Neumarkt plant was just great.”

Hexcel manufactures a complete range of carbon fibers, dry carbon UD tapes, specialty reinforcements, prepregs, and honeycomb core materials, providing customized manufacturing options for new UAM applications that combine aerospace reliability with the high-rate production required. Hexcel composite materials are the ideal solution for the lightest and most efficient cost-competitive transportation vehicles of the future.

Source:

Hexcel Corporation / 100% Marketing

(c) PREMIUM Exhibitions GmbH
02.07.2021

PREMIUM Group goes digital on FFW STUDIO

Live panels, future talks, brand experiences, stories, entertainment: from July 5th to 9th, the protagonists of the fashion industry will meet digitally for the first time on a common platform, the FFW STUDIO. Launched by the makers of Frankfurt Fashion Week and Europe's largest fashion fairs, PREMIUM, SEEK & Neonyt, the new content hub at www.frankfurt.fashion offers an individually designed program as an alternative to the physical event.

And the classic trade fair business will also find a digital representation this summer: Together with long-term partner JOOR, Anita Tillmann and team are presenting the PREMIUM + SEEK Passport platform this season. Here retailers can discover and order the collections of over 12,500 brands online and be inspired by various content formats.

Live panels, future talks, brand experiences, stories, entertainment: from July 5th to 9th, the protagonists of the fashion industry will meet digitally for the first time on a common platform, the FFW STUDIO. Launched by the makers of Frankfurt Fashion Week and Europe's largest fashion fairs, PREMIUM, SEEK & Neonyt, the new content hub at www.frankfurt.fashion offers an individually designed program as an alternative to the physical event.

And the classic trade fair business will also find a digital representation this summer: Together with long-term partner JOOR, Anita Tillmann and team are presenting the PREMIUM + SEEK Passport platform this season. Here retailers can discover and order the collections of over 12,500 brands online and be inspired by various content formats.

FFW STUDIO broadcasts live from the conferences of Frankfurt Fashion Week, the Frankfurt Fashion SDG Summit presented by Conscious Fashion Campaign in cooperation with the United Nations Office for Partnerships and the conference "The New European Bauhaus - Workshop of the Future", organized by the Fashion Council Germany in cooperation with the Frankfurt Fashion Week. Both will take place for the first time as part of the Frankfurt Fashion Week. With over 130 speakers, the Fashionsustain conference is also a central component of the FFW STUDIOS.

Source:

PREMIUM Exhibitions GmbH

29.06.2021

ISKO & Soorty: "We believe in cooperation over competition."

  • Denim ingredient ISKO and Pakistan's largest vertically integrated denim company Soorty join forces

From competition to virtuous co-opetition: ISKO and Soorty announce the signing of a technology licensing agreement which sees the two companies working in partnership on the production of fabric and garment collections. The collaboration combines ISKO’s expertise in creating best-in-class, patented technologies with Soorty’s extensive vertical production network, which will be utilized to produce the collections. This collaboration opens the door to significant, new business opportunities for both companies and will enable them to meet customers’ needs on a greater scale.

Both players judge themselves at the forefront of sustainability, inclusivity, technology and education in the industry and are driven by a shared approach that prioritizes synergy, cross-fertilization, and a quest for constant improvement.

  • Denim ingredient ISKO and Pakistan's largest vertically integrated denim company Soorty join forces

From competition to virtuous co-opetition: ISKO and Soorty announce the signing of a technology licensing agreement which sees the two companies working in partnership on the production of fabric and garment collections. The collaboration combines ISKO’s expertise in creating best-in-class, patented technologies with Soorty’s extensive vertical production network, which will be utilized to produce the collections. This collaboration opens the door to significant, new business opportunities for both companies and will enable them to meet customers’ needs on a greater scale.

Both players judge themselves at the forefront of sustainability, inclusivity, technology and education in the industry and are driven by a shared approach that prioritizes synergy, cross-fertilization, and a quest for constant improvement.

The first collaborative effort between the companies sees the launch of the ISKO Future Face™ by Soorty collection. Created using ISKO’s innovative ISKO Future Face™ technology, it is produced by Soorty specifically for the US market. ISKO Future Face™ is a patented woven fabric that looks like a knit. This fabric innovation combines a soft, silky finish with comfort, enhanced shape retention and a flattering drape, while maintaining all the properties of true denim.

More information:
Isko Soorty
Source:

Menabò Group srl

Dibella is the initiator of the "Organic Cotton" pilot project ©Tchibo
The demand for Fairtrade organic cotton is growing rapidly and is supported by a project initiated by Dibella in India.
29.06.2021

Dibella is the initiator of the "Organic Cotton" pilot project

  • Organic cotton project with thriving prospects

Dibella is participating in a joint project to promote organic cotton cultivation in India. The project aims to protect organic cultivation through targeted training measures and by paying premiums to small farmers, to support the conversion from conventional to organic cotton, to increase crop yields and at the same time to achieve better fibre quality.

The demand for organically grown organic cotton is growing rapidly, but crop yields are lagging well behind global demand. The Alliance for Sustainable Textiles (Berlin), initiated by Development Minister Dr. Gerd Müller, therefore wants to increase organic cotton volumes for its member companies with practical solutions. In cooperation with the Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ), it is now promoting a forward-looking project for which Dibella provided the impetus.

  • Organic cotton project with thriving prospects

Dibella is participating in a joint project to promote organic cotton cultivation in India. The project aims to protect organic cultivation through targeted training measures and by paying premiums to small farmers, to support the conversion from conventional to organic cotton, to increase crop yields and at the same time to achieve better fibre quality.

The demand for organically grown organic cotton is growing rapidly, but crop yields are lagging well behind global demand. The Alliance for Sustainable Textiles (Berlin), initiated by Development Minister Dr. Gerd Müller, therefore wants to increase organic cotton volumes for its member companies with practical solutions. In cooperation with the Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ), it is now promoting a forward-looking project for which Dibella provided the impetus.

"In India, it is mainly micro-farms and village cooperatives that are active in organic cotton cultivation. Conversion of additional land and sustainable management could increase yields and fibre quality of organic cotton. The Chetna Organic initiative, with which we have been working successfully for many years, advises the farmers in these processes. It supports the farmers and village communities with targeted education, training and practical assistance in organic farming, thus preparing the ground for better income and living conditions for the families," says Ralf Hellmann, Managing Director of Dibella.

Several alliance partners - Dibella, Fairtrade Germany, GIZ, Organic Cotton Accelerator (OCA) and Tchibo - have taken the exemplary initiative as an opportunity to promote the cultivation and expansion of organic cotton in India. In cooperation with Chetna Organic, they focus on supporting Indian women's cooperatives, women farmers and families in the production of organic cotton as part of the "Organic Cotton Pilot Project". Tchibo and Fairtrade subsidise micro-farms during the conversion phase of the fields (the fibres are only recognised as organic cotton four years after conversion) and contribute to the provision of GMO-free seeds, which have become a scarce commodity in India. Together with Dibella, they finance training courses that teach the optimal use of natural rainfall as well as efficient, ecological cultivation methods, which subsequently lead to improved fibre quality. In addition, they commit to purchasing Fairtrade organic cotton for many years.

Ralf Hellmann: "The pilot project enables us to expand our Dibella Good Textiles collection because it guarantees us long-term access to fair-trade organic cotton. At the same time, it improves the living conditions of the small-scale farmers and their families. We therefore hope that "Organic Cotton" will also set a precedent in other cotton growing regions and bring organic farming forward in India."

28.06.2021

Joint Business Statement on EU-MERCOSUR Association Agreement

  • A coalition of 13 European business associations, representing different European sectors calls for the swift ratification of the EU-Mercosur association agreement.
  • With the political agreement reached already 2 years ago (June 2019), now is the time to move forward and unlock the manifold mutual benefits that this agreement will deliver.

The EU-MERCOSUR agreement is the largest and most ambitious trade agreement ever negotiated by both sides, provides regulatory certainty for both trade in goods and services, and establishes better trade links between countries of respectively 440 and 260 million citizens. It also includes the most advanced sustainable development provisions that will foster partnership, help mitigate climate change and bind both sides to effectively implement the Paris Agreement. Moreover, it includes enforceable commitments on workers' rights and environmental protection through a dedicated dispute settlement mechanism.

  • A coalition of 13 European business associations, representing different European sectors calls for the swift ratification of the EU-Mercosur association agreement.
  • With the political agreement reached already 2 years ago (June 2019), now is the time to move forward and unlock the manifold mutual benefits that this agreement will deliver.

The EU-MERCOSUR agreement is the largest and most ambitious trade agreement ever negotiated by both sides, provides regulatory certainty for both trade in goods and services, and establishes better trade links between countries of respectively 440 and 260 million citizens. It also includes the most advanced sustainable development provisions that will foster partnership, help mitigate climate change and bind both sides to effectively implement the Paris Agreement. Moreover, it includes enforceable commitments on workers' rights and environmental protection through a dedicated dispute settlement mechanism.

Failure to ratify the agreement would leave the EU and Mercosur with fewer instruments to build mutual trust and cooperate to face the biggest challenge of our time. Moreover, non-ratification will lead to Mercosur countries continuing to trade, or even expanding their trade, with other trading partners that have substantially lower environmental and labour standards. Please find attached the full joint statement.

Source:

EURATEX

21.06.2021

ISKO contributes to new IFM-Kering fashion course.

The world’s leading denim ingredient brand is proud to announce it has contributed its considerable denim expertise to prestigious fashion school, Institut Français de la Mode’s (IFM) new online course, Fashion Sustainability: Shaping Fashion’s Future.

Developed as part of a partnership with IFM and Kering luxury group and led by Andrée-Anne Lemieux, Sustainability Professor and Head of the IFM-Kering Sustainability Chair, the 10-week course will examine the importance of sustainability in fashion and invites students and experienced fashion professionals to learn how they can play a role in shaping a sustainable future for fashion.

The world’s leading denim ingredient brand is proud to announce it has contributed its considerable denim expertise to prestigious fashion school, Institut Français de la Mode’s (IFM) new online course, Fashion Sustainability: Shaping Fashion’s Future.

Developed as part of a partnership with IFM and Kering luxury group and led by Andrée-Anne Lemieux, Sustainability Professor and Head of the IFM-Kering Sustainability Chair, the 10-week course will examine the importance of sustainability in fashion and invites students and experienced fashion professionals to learn how they can play a role in shaping a sustainable future for fashion.

Launched on 17 May, the course covers the history and values of sustainable development and how this relates to the fashion industry, as well as teaches the practicalities of creating and executing a CSR and sustainability strategy. As part of the course, ISKO has created a video presentation which gives an insight into its Responsible Innovation™ strategy and how it approaches its role as a leader in sustainability for denim production. Led by ISKO’s Global Field Marketing Manager, Elena Faleschini, the presentation explores how innovation along with the cooperation and participation of everyone in the denim industry can help make the production of denim more responsible.

“The Fashion Sustainability course gives students and industry professionals the knowledge and tools to become the change makers we need in the industry. We are honored to contribute to the course and be able to share our vast experience working to build a more sustainability industry for the future,” says Faleschini.

Source:

Menabò Group

SHIMA SEIKI to Exhibit at Pitti Filati 89 (c) SHIMA SEIKI
18.06.2021

SHIMA SEIKI to Exhibit at Pitti Filati 89

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of a leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 89th edition of the Pitti Immagine Filati exhibition in Florence, Italy from the 28th till the 30th of June. Because this edition of Pitti Filati will be a fusion of physical venue and online exhibit via Pitti Connect, increased importance is sure to be placed upon digitalization in the presentation of yarn.

In order to further support efforts in DX in the fashion industry, SHIMA SEIKI is presenting new online services at Pitti Filati. APEXFiz™ is SHIMA SEIKI’s first subscription-based design software and yarnbank™ a digital yarn sourcing web service for the knitting industry.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of a leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 89th edition of the Pitti Immagine Filati exhibition in Florence, Italy from the 28th till the 30th of June. Because this edition of Pitti Filati will be a fusion of physical venue and online exhibit via Pitti Connect, increased importance is sure to be placed upon digitalization in the presentation of yarn.

In order to further support efforts in DX in the fashion industry, SHIMA SEIKI is presenting new online services at Pitti Filati. APEXFiz™ is SHIMA SEIKI’s first subscription-based design software and yarnbank™ a digital yarn sourcing web service for the knitting industry.

APEXFiz™ is the latest addition to SHIMA SEIKI’s proven SDS®-onE APEX series design system lineup, but with a big departure from the past. Whereas previous APEX-series design systems were offered as an all-in-one hardware/software package, for the first time in its nearly 40 years of design system development, SHIMA SEIKI has released its new APEXFiz™ as subscription-based design software that can be installed on customers’ individual computers. Maintaining proven functions that have made the APEX series so popular with fashion designers, with APEXFiz™ those strengths are now enhanced with the added versatility to adapt to different work styles and business environments including teleworking and telecommuting. APEXFiz™ software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain. APEXFiz™ is furthermore available in 5 different product variations that can be selected according to the customer’s needs, from APEXFiz™ Design Jr. to APEXFiz™ Design Pro.

APEXFiz™ is supported by another web service to enhance its user experience even more. yarnbank™ is one of the world's first online platforms for searching and downloading digitized yarns, developed in cooperation with yarn companies from around the world. Registered users can download yarn data for free, for use in fabric simulation and virtual sampling on APEXFiz™, avoiding the need to scan yarn on their own.

Source:

SHIMA SEIKI

17.06.2021

C.L.A.S.S. ICON AWARD 2021 goes to DUARTE

The second C.L.A.S.S. ICON AWARD expands its vision embracing fashion streetwear with an attitude and bets on DUARTE, an emerging label committed to sustainability that shows a new way of being cool, yet responsible. “The C.L.A.S.S. ICON AWARD is much more than prize, it’s an open workshop with influential professionals that will support DUARTE in reaching the next level and being able to share my vision for responsible fashion”, comments Ana Duarte.

The designer (b.1991) launched her label DUARTE in 2016 just after graduation. Since then, the fresh, colourful and power-propelling brand has conquered both catwalks and cities’ streets with a responsible message. “Sustainability means durability, fair work practices, recycled materials and zero-waste,” is Ana’s mantra. Indeed, the collection is the result of a virtuous balance between production and locally-sourced, recyclable high-quality materials harnessed from factories’ deadstock. DUARTE also means circularity, the garments can be re-used and upcycled to create new collections.

The second C.L.A.S.S. ICON AWARD expands its vision embracing fashion streetwear with an attitude and bets on DUARTE, an emerging label committed to sustainability that shows a new way of being cool, yet responsible. “The C.L.A.S.S. ICON AWARD is much more than prize, it’s an open workshop with influential professionals that will support DUARTE in reaching the next level and being able to share my vision for responsible fashion”, comments Ana Duarte.

The designer (b.1991) launched her label DUARTE in 2016 just after graduation. Since then, the fresh, colourful and power-propelling brand has conquered both catwalks and cities’ streets with a responsible message. “Sustainability means durability, fair work practices, recycled materials and zero-waste,” is Ana’s mantra. Indeed, the collection is the result of a virtuous balance between production and locally-sourced, recyclable high-quality materials harnessed from factories’ deadstock. DUARTE also means circularity, the garments can be re-used and upcycled to create new collections.

The C.L.A.S.S. ICON AWARD is a project led by C.L.A.S.S. with the special support of IDEE BRAND PLATFORM which assists fashion brands in commercial activity, WHITE Milano, international fair supporting the new generations and independent brands with special projects since its inception and responsible shopping platform Renoon. Together they will all support DUARTE for a full year at 360°, from consultancy to communication.

Source:

C.L.A.S.S. / GB Network Marketing & Communication

Jean Marie Canan (C) Lectra
03.06.2021

Jean Marie Canan joins Lectra's Board of Directors

Lectra’s Shareholders’ Meeting appointed Jean Marie (“John”) Canan as a new Director, for a period of four years. Jean Marie Canan becomes a member of Lectra’s Audit Committee, Compensation Committee and Strategic Committee.

A Canadian national, at 64, Jean Marie Canan is currently Lead Independent Director and Chairman of the Audit Committee of REV Group, an American company listed on the NYSE; Director and Chairman of the Audit Committee of Acasti Pharma, a Canadian company listed on the NASDAQ and Director of the Angkor Hospital for Children, a leading non-profit pediatric hospital in Cambodia.

Lectra’s Shareholders’ Meeting appointed Jean Marie (“John”) Canan as a new Director, for a period of four years. Jean Marie Canan becomes a member of Lectra’s Audit Committee, Compensation Committee and Strategic Committee.

A Canadian national, at 64, Jean Marie Canan is currently Lead Independent Director and Chairman of the Audit Committee of REV Group, an American company listed on the NYSE; Director and Chairman of the Audit Committee of Acasti Pharma, a Canadian company listed on the NASDAQ and Director of the Angkor Hospital for Children, a leading non-profit pediatric hospital in Cambodia.

Jean Marie Canan, graduated from McGill University in Montreal, Canada and is a Canadian Certified Public Accountant (CPA), began his career at PricewaterhouseCoopers (PwC) in 1978, starting in their Montreal office, and then two years in their Hong Kong office. From 1990 to 2014, he held many ever-increasing positions of responsibility at Merck & Co, Inc. (“Merck”). These included senior roles in finance, strategy development, business development and operations. He was part of a small team that led the acquisition of Schering-Plough by Merck. He also provided operational oversight for most of the Merck group’s joint ventures, including DuPont-Merck, Johnson and Johnson-Merck, Astra-Merck, and Schering-Plough-Merck. Merck’s Executive Committee selected Jean Marie as one of the five senior leaders charged with defining Merck's new strategy in 2006.

More information:
Lectra, PLM Jean Marie Canan
Source:

Lectra

02.06.2021

Lenzing und Södra join forces in post-consumer textile recycling

  • Closing the loop from fiber to fiber in fashion

Lenzing, a leading global supplier of wood-based specialty fibers, and Södra, a producer of pulp, signed a cooperation agreement today, June 02, 2021. The cooperation involves the transfer of knowledge between the two companies, which have been proactively driving the circular economy issue for many years, and a joint process development followed by a capacity expansion for pulp from post-consumer waste. The jointly developed pulp OnceMore® will subsequently also be used as a raw material for the production of Lenzing’s TENCEL™ x REFIBRA™ branded specialty fibers.
The goal is to process 25,000 tons of textile waste per year by 2025.

  • Closing the loop from fiber to fiber in fashion

Lenzing, a leading global supplier of wood-based specialty fibers, and Södra, a producer of pulp, signed a cooperation agreement today, June 02, 2021. The cooperation involves the transfer of knowledge between the two companies, which have been proactively driving the circular economy issue for many years, and a joint process development followed by a capacity expansion for pulp from post-consumer waste. The jointly developed pulp OnceMore® will subsequently also be used as a raw material for the production of Lenzing’s TENCEL™ x REFIBRA™ branded specialty fibers.
The goal is to process 25,000 tons of textile waste per year by 2025.

OnceMore® by Södra is the world’s first process for industrial-scale recycling of textile waste of blended fibers, and it’s the forest who makes that possible. The process combines wood cellulose with textile waste to create a pure, high-quality dissolving pulp which can be used to produce new clothing and other textile products. During 2022, a new investment will ten-fold the production capacity of OnceMore® pulp and reach a higher level of recycled textile content. The goal for 2025 is to process 25,000 tons of textile and offer a OnceMore® pulp based on our wood material and 50 percent recycled textile material.

 

Source:

Lenzing AG

Oerlikon: Booth at ITMA Asia 2021 (c) Oerlikon
01.06.2021

Oerlikon with a hybrid trade show concept at ITMA Asia

On the occasion of the VDMA press conference, André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs at Oerlikon Polymer Processing Solutions Division, presented the company's concept for ITMA Asia with the claim: Clean Technology. Smart Factory.

Due to the Corona pandemic, Oerlikon has decided to concentrate with their Chinese sales and service teams on guests primarily from China and greater Asia. However, some experts from Germany, who are working in China at our locations anyway, will be live on site at the booth. Other experts from Germany, India and US will be available online for the entire 5 days of the trade fair and will simply be connected by video conference to the discussion with the visitors on site if there is a need for.

On the occasion of the VDMA press conference, André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs at Oerlikon Polymer Processing Solutions Division, presented the company's concept for ITMA Asia with the claim: Clean Technology. Smart Factory.

Due to the Corona pandemic, Oerlikon has decided to concentrate with their Chinese sales and service teams on guests primarily from China and greater Asia. However, some experts from Germany, who are working in China at our locations anyway, will be live on site at the booth. Other experts from Germany, India and US will be available online for the entire 5 days of the trade fair and will simply be connected by video conference to the discussion with the visitors on site if there is a need for.

At ITMA Asia 2021, Oerlikon will present the next generation of an automatic texturing solution with up to 25 % energy saving and up to 30 % higher production speed, easy maintenance and best yarn quality. The core of this machine, the socalled EvoCooler, will be shown as an exhibit in combination with digital solutions like AIM4DTY. In the field of high-precision flow control solutions components, the two new gear metering pumps developments for the production of aramid and spandex will be presented as well.

27.05.2021

PERFORMANCE DAYS: Successful Digital Fair Week

The PERFORMANCE DAYS summer edition took place as a Digital Fair Week from May 17 to 21, 2021. By extending the event to an entire week of the fair, the PERFORMANCE DAYS team, in cooperation with the Functional Fabric Fair by PERFORMANCE DAYS, was able to provide even more opportunities for intensive networking and interactive exchange for industry insiders to catch up on the latest innovations and participate in exciting expert talks, supplier workshops and panel discussions.

Informative, innovative and international: new sourcing platform THE LOOP
The Digital Fair Week was introduced for the first time at the summer edition as part of PERFORMANCE DAYS LOOPS. The sourcing platform was launched in the first half of 2021 together with US Partner Functional Fabric Fair by PERFORMANCE DAYS. With much success, as proven by the great enthusiasm shown by exhibitors, trade fair visitors and fabric manufacturers. The MARKETPLACE area, which showcased some 10.000 products and around 400 curated, sustainable fabrics and accessories from more than 170 international exhibitors, enjoyed particular popularity as part of the Digital Fair.

The PERFORMANCE DAYS summer edition took place as a Digital Fair Week from May 17 to 21, 2021. By extending the event to an entire week of the fair, the PERFORMANCE DAYS team, in cooperation with the Functional Fabric Fair by PERFORMANCE DAYS, was able to provide even more opportunities for intensive networking and interactive exchange for industry insiders to catch up on the latest innovations and participate in exciting expert talks, supplier workshops and panel discussions.

Informative, innovative and international: new sourcing platform THE LOOP
The Digital Fair Week was introduced for the first time at the summer edition as part of PERFORMANCE DAYS LOOPS. The sourcing platform was launched in the first half of 2021 together with US Partner Functional Fabric Fair by PERFORMANCE DAYS. With much success, as proven by the great enthusiasm shown by exhibitors, trade fair visitors and fabric manufacturers. The MARKETPLACE area, which showcased some 10.000 products and around 400 curated, sustainable fabrics and accessories from more than 170 international exhibitors, enjoyed particular popularity as part of the Digital Fair.

Another extremely popular and particularly well-attended attraction was the 3D FORUM, which tested hand-selected fabrics for their material properties as part of the digital fair week, to be visualized ultimately as a 3D scan.
Also for the spring/summer 2023 season, the jury presented two awards for outstanding fabrics – so in addition to the presentation of the PERFORMANCE AWARD, won by Trenchant Textiles, the ECO PERFORMANCE AWARD was presented to the winner, Utenos Trikotazas.

Professional, versatile and informative: Program with Expert Talks
A total of 17 live talks from 30+ speakers followed by a question-and-answer session, under the guidance of moderator and freelancer Astrid Schlüchter, formed the basis of the digital fair supporting program from May 17 to 19. All talks, webinars and panel discussions are available on demand via THE LOOP platform.

The PERFORMANCE DAYS Team has once again succeeded in providing the industry with an almost real trade fair experience despite being held digitally. Via the Digital Fair Platform, which was activated explicitly for the trade fair week, trade fair visitors can enter into interactive exchange, including matchmaking and networking activities.

The premiere of the Functional Textiles Shanghai by PERFORMANCE DAYS fair takes place in Shanghai in September 28-29 as well as in Portland in October 27-28, 2021, with the planned hybrid event in Munich scheduled for December 1 and 2, 2021.

Source:

PERFORMANCE DAYS

(c) Huntsman Textile Effects
12.05.2021

Huntsman Textile Effects at Performance Days Digital Fair Week

  • Huntsman Textile Effects presents range of high-performance solutions for performance apparel

Huntsman Textile Effects, global leader in innovative solutions and environmentally sustainable products, will highlight its extensive end-to-end suite of protection effects and high-performance solutions for performance apparel at the Performance Days Digital Fair Week this May. Huntsman will also deliver a presentation on sustainability, showcasing the top megatrends impacting the textile industry.

With increasing adoption of active lifestyles and outdoor activities, consumers are demanding high-performance, yet comfortable and sustainably-produced sportswear. Consumers are looking for brands that incorporate sustainable processes and principles in their operations.

  • Huntsman Textile Effects presents range of high-performance solutions for performance apparel

Huntsman Textile Effects, global leader in innovative solutions and environmentally sustainable products, will highlight its extensive end-to-end suite of protection effects and high-performance solutions for performance apparel at the Performance Days Digital Fair Week this May. Huntsman will also deliver a presentation on sustainability, showcasing the top megatrends impacting the textile industry.

With increasing adoption of active lifestyles and outdoor activities, consumers are demanding high-performance, yet comfortable and sustainably-produced sportswear. Consumers are looking for brands that incorporate sustainable processes and principles in their operations.

“The upward trend in the performance apparel segment is spurred on by the demands and evolving needs of consumers; sustainability also remains the top of mind amongst these consumers. At Huntsman, we are delighted to be able showcase our suite of solutions that are high-performing and sustainable, so that mills and brands are better able to meet the fast-changing market needs,” said Dhirendra Gautam, Senior Director – Global Market Strategy and Innovation, Huntsman Textile Effects.

Huntsman’s featured solutions:

  • Complete end-to-end systems for protection effects, from pre-treatment to coloration and finishing
  • Revolutionary antimicrobial and odor-control solutions from Sciessent - The Agion®, Lava X2® and Active X2® products will be featured at the upcoming show
  • HIGH IQ® intelligent effects is a set of brand assurance programs that support accelerated evaporation, water and stain repellence, lasting color and cool comfort, ensuring garments dry quickly for long-lasting comfort

Performance Days Digital Fair Week will take place digitally from May 17-21, 2021. Huntsman will also deliver a presentation on May 18, 2021, at 2 p.m. (CEST) at the Expert Talk session. Titled “Sustainability & Textiles: Being the Change That We Want to See”, the presentation will showcase the megatrends that will define the next five years, and the textile and apparel industries’ quest for more sustainable design, product development, production methods and garment care.

Source:

Huntsman Textile Effects