From the Sector

Huntsman Textile Effects, a global leader in innovative solutions and environmentally sustainable products, will be at Outdoor Retailer in Denver, Colorado this week to present end-to-end solutions that enable outdoor apparel brands to achieve the functionality that outdoor adventurers crave with on-trend aesthetics and a high degree of sustainability.

Resource-saving solutions
Huntsman will highlight the AVITERA® SE Fast process. This technology delivers the lowest environmental impact for dyeing polyester-cellulosic (PES-CO) blends. It combines alkali-clearable TERASIL® W/WW disperse dyes and AVITERA® SE reactive dyes to cut processing time from around nine hours to just six, helping mills to reduce the water and energy required for production by up to 50% and to increase output by up to 25% or more. The new process also delivers outstanding wet-fastness to ensure that sportswear will not bleed or stain during home laundering or while in storage or transit.

EROPON® E3-SAVE is another next-generation water-saving innovation. An all-in-one textile auxiliary for PES processing, it allows pre-scouring, dyeing and reduction clearing to be combined in a single bath and eliminates the need for anti-foaming products, which shortens processing time and further saves water and energy.

Eco-friendly stain and rain resistance
Huntsman will also present eco-friendly finishes that repel water and stains to help garments look new for longer. Continuing its long-standing relationship with Chemours, Huntsman is highlighting Teflon™ EcoElite with Zelan™ R3 technology. The industry’s first renewably sourced water-repellent finish, it contains 63% plant-based materials and exceeds performance levels possible with traditional fluorinated technologies, preserving breathability while offering excellent water repellency and durability.

Another breakthrough for brands and mills is PHOBOTEX® RSY for outerwear. A next-generation non-fluorinated water-repellent finish, its performance is comparable to formulations based on per-fluorinated chemicals (PFCs), delivering sustainable protection that keeps the wearer dry, even in the most demanding environments. It is a perfect combination of excellent water repellency and extremely high wash durability.

Innovative odor control solutions
Huntsman will also showcase antimicrobial and odor-control solutions as part of its partnership with Sciessent. Sciessent’s latest anti-odor technology, NOBO™, has been specifically developed to reduce odors in natural and synthetic fabrics. It can be incorporated into virtually any fabric, making it ideal for everything from base layer and activewear tops to socks and underwear to hiking pants, chinos and hard shell jackets. It offers a cost-effective way to upgrade everyday garments.

In addition, the partners will also present Sciessent’s Agion Active X2®, a next-generation odor-control solution that combines advanced antimicrobial and odor-absorbing technologies to both capture and fight odor-causing bacteria, and Lava X2®, a standalone odor adsorption product and key component of Agion Active X2® that attracts, adsorbs and degrades odors for long-lasing odor protection.

International technology group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at Techtextil in Frankfurt from June 21 to 24. The ANDRITZ product portfolio covers state-of-the-art nonwovens and textile production technologies, such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing. For Techtextil, special focus lies on technologies for textile recycling, needlepunch, airlay, wetlaid glass fibers and textile calendering.

TEXTILE RECYCLING TECHNOLOGIES BASED ON TEARING
With the acquisition of ANDRITZ Laroche SAS, ANDRITZ has expanded its product portfolio to include airlay and recycling technology as well as bast fiber processing technologies. Complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end-uses are one focus of this product range. Customer awareness and regulations are forcing clothing brands to recycle their textile waste in their own products. Recycled fibers can also be used in the nonwovens industry for various applications, for example in the automotive industry, for insulation, mattresses, and furniture felts.

ANDRITZ Laroche offers a complete process range of tearing lines from 50 up to 3,000 kg/h, which can be used for almost all types of pre/post-consumer textile waste. The aim is to preserve the character of the original fibers, for example cotton, by maximizing fiber length, strength and feel.

Cooperating alliances for lightweight technology: The European Lightweight Association (ELA) and the European Lightweight Clusters Alliance (ELCA) have decided to work together. Both European lightweight clusters are united by the common goal of giving the enormous economic and ecological potential of lightweight technology more visibility in politics, business and science at European, national and regional level. In addition, complementary expertises of work form the basis for the future partnership, from which European lightweight technology can optimally benefit.

"We see great potential in the future cooperation of the ELA and the ELCA to advance lightweight technology in Europe with combined forces," says Dr Katharina Schöps as representative of the ELCA. "In this way, we are strengthening the global competitiveness of European companies and at the same time making a significant contribution to climate protection," says Jean-Pierre Heijster of the ELA about the cooperation of the European lightweight technology networks.

Together, ELCA and ELA represent a growing network of more than 4,500 companies and more than 600 research institutions from 12 European countries active in lightweight technology across different
sectors and industries. This brings together the two largest lightweight technology communities in Europe. Lightweight solutions from Europe can thus gain visibility and be implemented more quickly in global markets.

Joining forces to strengthen lightweight technologies ́ market position at the European level ELCA and ELA want to improve the positioning of lightweight technologies and materials with joint activities and events, in particular to prioritise them on the agenda of the European Commission. The cooperation thus wants to send a clear signal to Brussels. Especially with the view to achieve European climate protection goals; lightweight technology has the potential to conserve valuable resources and reduce CO 2 emissions. At the same time, the improved sustainability with the same or even optimised performance brings valuable competitive advantages for companies. Lightweight products and technologies Made in Europe can thus become a unique selling point for European stakeholders on international markets.

With this cooperation, ELCA and ELA combine their respective strengths: ELCA, as the European Lightweight Clusters Alliance, has very successfully created a resilient pan-European innovation ecosystem for lightweight technology in recent years. ELA, on the other hand, is particularly characterised by its close ties to industrial users. As a result, the existing ecosystem is enriched and a more demand-oriented development and faster market introduction is made possible. In this way, both lightweight technology networks will complement each other optimally in the future in order to bring technology and markets together in a targeted manner.

• Hexcel Composite Innovations for Aerospace Applications on Display at JEC World 2022: Hall 5, Stand J41

In late 2021, Hexcel announced an agreement with Fairmat, a deep technology startup, to build the capability to recycle carbon fiber prepreg from Hexcel European operations for reuse in composite panels sold into commercial markets, giving a second life to recovered carbon fiber. To do so, Fairmat has developed a virtuous recycling process, and a sample of its newly recycled material will be available to view at JEC World 2022. Hexcel will present an array of product innovations for aerospace and urban air mobility customer applications during JEC World 2022 in Paris on May3-5. These latest innovations demonstrate the company’s leadership in developing advanced composites technology for the aerospace market.

• Sustainability Focus on Recycling and Reuse
• HiTape® and HiMax® Reinforcements for OoA Processing
• Innovative HiFlow™ Resins for Continuous and Shorter Cycle Injection Processes
• HexPly® Prepregs for Primary Structure and Engine Applications
• HexTow® High Modulus Fibers HM63 and HM54
• Thermoplastics and Processing Innovations for Primary and Secondary Structures
• Lightweight PrimeTex® Reinforcements Solutions for Urban Air Mobility (UAM)

Computerized knitting machine manufacturer SHIMA SEIKI MFG., LTD. will participate in the SIMATEX exhibition in Buenos Aires, Argentina from 30th of May - 2nd of June 2022.

SHIMA SEIKI will exhibit a wide range of its products, including proposals in seam-free WHOLEGARMENT® knitting technology that offers an alternative to labor-intensive manufacturing in the South American market. Three MACH2VS machines, capable of knitting WHOLEGARMENT® knitwear using every other needle, will be shown in 12, 16 and 18 gauge configurations. The N.SVR workhorse series improves on the SVR series, resetting the industry benchmark for shaped knitting. The N.SVR123SP featuring a special loop presser bed that can produce hybrid inlay fabrics with both knit and weave characteristics. Shown in 18 gauge at the SHIMA SEIKI booth, N.SVR123SP will also feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch for even greater diversity in knit design. N.SSR112 improves on the SSR series and continues to offer industry-leading technology in an economical yet reliable package made in Japan.

Demonstrations will be performed on SHIMA SEIKI's SDS®-ONE APEX4 design system. At the core of the company’s “Total Fashion System” concept, SDS®-ONE APEX4 provides comprehensive support throughout the production supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to production and even sales promotion. Especially effective is the way SDS®-ONE APEX4 improves on the design evaluation process with its ultra-realistic simulation capability, whereby virtual samples minimize the need for actual sample-making. This realizes significant savings in time, cost and material, contributing to sustainable manufacturing.

• Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
Airbags have become an integral part of our everyday automotive lives. The yarns used in them are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technologies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants. And all this without any loss of function in any climate and anywhere in the world for the lifetime of the vehicle.

Buckle up!
Seat belts play a decisive role in protecting vehicle occupants. They have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments.

Invisible, but essential – road reinforcement using geotextiles
But it not just inside vehicles, but also under them, that industrial yarns reveal their strengths. Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demanding tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC – technological quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

New high-tech Staple Fiber Technology Center
Extending to around 2,100 m2, Oerlikon Neumag in Neumünster is home to one of the world’s largest staple fiber technology centers. As of now, these state-of-the-art staple fiber technologies are also available for customer-specific trials.

The focus during the planning and the design of the Technology Center was on optimizing components and processes. Here, special attention was paid to ensuring the process and production parameters in the Technology Center system could be simply and reliably transferred to production systems. Here, the fiber tape processing line is modular in design. All components can be combined with each other as required. And comprehensive set-up options supply detailed findings for the respective process for various fiber products.

The Technology Center is also equipped with two spinning positions for mono- and bi-component processes. The same round spin packs are used for both processes, characterized by excellent fiber quality and properties and meanwhile very successfully deployed in all Oerlikon Neumag production systems. Furthermore, the spinning plant is complemented by automation solutions such as spin pack scraper robots, for example.

• Featured at FESPA Global Print Expo 2022, new cloud and mobile suite offerings help reduce costs and maximise the value of customers’ EFI printer investments

Electronics For Imaging, Inc. announced the availability of its EFI IQ™ suite of cloud and mobile applications with supported EFI VUTEk®, Wide Format, and Nozomi inkjet printers. With this cloud service, EFI™ printer users can monitor production and printer utilisation, including exact device-level consumable tracking data, to reduce downtime, reduce costs and maximise the value of their EFI printer investments. New EFI wide- and superwide-format UV LED printers will include a one-year subscription to EFI IQ. EFI inkjet printer users can also purchase IQ subscriptions for other supported printers.
 
The newly available cloud service for superwide-format production is making its debut at the 31 May - 03 June FESPA Global Print Expo in Berlin.

User-friendly with better business intelligence
According to an early user of the cloud service’s new inkjet offering – Dave Brewer, chief technology officer of California-based Image Options – “EFI IQ is a user-friendly tool that gives me better business intelligence to make better decisions.”
 
By monitoring their printer fleets in real time, EFI IQ users can reduce consumable spend, save on labour costs, improve margins, and more.

Productivity with powerful cloud tools
The decision to adopt EFI IQ comes down to several key questions owners and managers should ask themselves about business performance, including:

• Can you accurately measure ink usage?
• Is your team able to get real-time production blocking alerts?
• Are you able to compare performance metrics between printers and shifts?
• Are you able to check production status from anywhere, at any time?

The IQ suite is a management solution which has a direct connection to EFI printer data, and it gives business leaders powerful tools to handle their day-to-day production and administrative challenges. Plus, the suite’s EFI Go component helps to ensure that managers receive urgent updates wherever they are. At early user site Studio DAR in Bielsko-Biała, Poland, notifications from the mobile application allow managers and operators to keep the company’s EFI Pro 32r+ roll-to-roll printer running as much as possible.

The ITA Group, consisting of the Institute for Textile Technology of RWTH Aachen University (ITA) and their research and development service provider ITA Technologietransfer GmbH (ITA GmbH) are proud to announce their new partnership with METYX Composites, Turkey today at JEC World in Paris. METYX is a globally leading manufacturer of high-performance technical textiles for applications in the transportation, wind energy, construction, sports and leisure industries.

Ugur Ustunel, CEO METYX Composites: “The access to ITA´s competences along the entire textile composite value chain and to the impressive machine parks with over 250 machines from lab scale to industrial scale and the exchange with other partners will be very welcome for our future pre-competitive developments.” Dr. Christoph Greb, Scientific Director of ITA: “We are very happy to welcome METYX to our
network and to collaborate in many joint projects and studies on topics like recycling and sustainability, tapes and hybrid yarns or natural fibres just to name a few.”

Dr. Michael Effing, Managing Director of AMAC GmbH: „I am very happy to support ITA in developing and growing their network. ITA is located in the centre of the RWTH Aachen University Campus in close proximity to numerous other institutes for lightweight developments.”

Officina39 will attend the Bangladesh Denim Expo in Dhaka on 10-11 May, a new edition after a two-year break, characterized by a focus on sustainability and the central theme "Beyond Business".

Officina39 has been committed for years to the reconversion of the sector’s technologies to an environmental point of view: this attitude is expressed in its latest Trustainable™ collection FW 23, based on the approach of honesty, transparency and social responsibility that drives the company. Officina39 will present Aqualess Fade, a technology just recently presented at Kingpins that recreates the bleaching effect of chlorine on fabrics, a waterless special compound for the discoloration of denim on indigo/black garments which is reducing resource consumption and environmental impact.

Aqualess Fade completes and integrates Aqualess Mission, a combination of technologies that allows garment laundry processes to reduce 75% of the water use. Until now, the process included three eco-friendly technologies: Novascraper Indigo, a laser finishing technique that adds a natural, vintage look to denim garments; OZ-ONE Powder, an advanced product to give garments a bleached yet eco-friendly treatment, for a worn and distressed look; and Aqualess Aged, a waterless compound to give denim abrasion effects. Specifically, this last revolutionizing product has recently marked an important achievement which adds to the company’s sustainable credentials: Officina39 received, for its Aqualess Aged, the DeniSafe® certification of enzyme product(s) by Novozymes for safe production and safe use through dry application.

Bangladesh Denim Expo is also ideal for presenting the results of The Circle Book 2, the second chapter of a collective project gathering ten high-profile players of the textile supply chain. Officina39’s Recycrom™ technology and the expertise of Meidea, Lenzing, Tejidos Rojo, Calik Denim, Ribbontex, Spring85, Dr. Bock Industries, Crafil and RGT have merged together on the development of CULTURE.IN, a circular capsule collection transparently made from recycled and degradable materials: a practical demonstration of how the fashion industry can improve considering social and environmental impacts and goals.

Mimaki Europe will be showcasing its latest innovative technologies and connecting with customers at FESPA 2022 Global Printing Expo (May 31st – June 3rd Berlin). Following the success of FESPA 2021, Mimaki will return as a gold sponsor for this landmark industry event. With a host of new solutions released this year, FESPA 2022 will be the first opportunity for Mimaki to demonstrate these printers and cutters at an international event and further explain the many benefits they offer sign and textile printing companies.

In the Spotlight
Standout technology on show includes the new 330 series, consisting of the JV330-160, the CJV330-160 and the TS330-1600. Launched during the company’s Global Innovation Days event, the 330 Series leverages Mimaki’s cross-platform strategy, to offer a high-end yet cost effective printing solution across several sectors. The eco-solvent inkjet printers, the JV330-160 and CJV330-160, boast innovative features such as the new media changer that allows three rolls of media to be loaded simultaneously, and the XY slitter, which provides in-line X-axis and Y-axis sheet-fed cutting. The TS330-1600, which will make its international tradeshow debut at FESPA, is a sublimation printer with an improved take-up system and optional add-ons to further increase efficiency, including a 10kg ink tank supply unit and a mini jumbo roll unit.

Additionally, FESPA visitors will see Mimaki’s all new CG-AR cutting plotter.

Urbanising FESPA 2022
In line with FESPA 2022’s tagline, ‘Experience print in motion’, Mimaki’s stand will bring a vibrancy to the show, by demonstrating real-world applications alongside the machines that created them. This year will see Mimaki’s stand convey the streets of Berlin in its design, and urban inspired works by designers, including Nicky Nahafahik and Xavier Protano, all printed using various Mimaki’s printing technologies and displayed on the stand - allowing visitors experience Berlin from inside the Messe Berlin halls. Mimaki will also join forces with Dutch designer Tessa Koops to create a selection of unique fashion items, after their successful collaborations in 2019.

Celebrating Customer Success
As a centrepiece of Mimaki’s stand, the customer gallery will return to FESPA 2022, showcasing and celebrating customer samples and testimonials. There will also be live demonstrations of Mimaki’s latest technologies in dedicated sign, UV and textile application areas. The latest UV printers on display include the UJV100, and the JFX and UJF series. The acclaimed 3D printer, the 3DUJ-2207, will also return to FESPA this year to showcase the many high-quality, full-colour models, including figurines, scale models and prototypes, achievable with this cost-efficient, entry-level printer.

To answer questions about the applications and Mimaki technologies, hospitality and meeting areas will provide space for one-to-one conversations with Mimaki experts.