From the Sector

• Renewable Carbon Initiative (RCI) published a strategy paper on the defossilisation of the chemical and material industry with eleven policy recommendations

The Renewable Carbon Initiative, an interest group of more than 30 companies from the wide field of the chemical and material value chains, was founded in 2020 to collaboratively enable the chemical and material industries to tackle the challenges in meeting the climate goals set by the European Union and the sustainability expectations held by societies around the globe.

RCI addresses the core of the climate problem: 72% of anthropogenic climate change is caused directly by extracted fossil carbon from the ground. In order to rapidly mitigate climate change and achieve our global ambition for greenhouse gas emission reductions, the inflow of further fossil carbon from the ground into our system must be reduced as quickly as possible and in large scale.

In the energy and transport sector, this means a vigorous and fast expansion of renewable energies, hydrogen and electromobility, the so-called decarbonisation of these sectors. The EU has already started pushing an ambitious agenda in this space and will continue to do so, for instance with the recently released ‘Fit for 55’ package.

However, these policies have so far largely ignored other industries that extract and use fossil carbon. The chemical and material industries have a high demand for carbon and are essentially only possible with carbon-based feedstocks, as most of their products cannot do without carbon. Unlike energy, these sectors cannot be “decarbonised”, as molecules will always need carbon. The equivalent to decarbonisation via renewable energy in the energy sector is the transition to renewable carbon in the chemical and derived materials industries. Both strategies avoid bringing additional fossil carbon from the ground into the cycle and can be summarised under the term “defossilisation”.

To decouple chemistry from fossil carbon, the key question is which non-fossil carbon sources can be used in the future. Rapid developments in biosciences and chemistry have unlocked novel, renewable and increasingly affordable sources of carbon, which provide us with alternative solutions for a more sustainable chemicals and materials sector. These alternative sources are: biomass, utilisation of CO2 and recycling. They are combined under the term “renewable carbon”. When used as a guiding principle, renewable carbon provides a clear goal to work towards with sufficient room to manoeuvre for the whole sector. It enables the industry to think out of the box of established boundaries and stop the influx of additional fossil carbon from the ground.

The systematic change to renewable carbon will not only require significant efforts from industry, but must be supported by policy measures, technology developments and major investments. In order to implement a rapid and high-volume transition away from fossil carbon, and to demonstrate its impact, a supportive policy framework is essential. The emphasis should be put on sourcing carbon responsibly and in a manner that does not adversely impact the wider planetary boundaries nor undermines societal foundations. An overarching carbon management strategy is required that also takes specific regional and application-related features into account, to identify the most sustainable carbon source from the renewable carbon family. This will allow for a proper organisation of the complex transition from today’s fossil carbon from the ground to renewable energy and to renewable carbon across all industrial sectors.

RCI has developed eleven concrete policy recommendations on renewable carbon, carbon management, support for the transformation of the existing chemical infrastructure and the transformation of biofuel plants into chemical suppliers. The policy paper “Renewable Carbon as a Guiding Principle for Sustainable Carbon Cycles” is freely available for download in both a short version and a long version.

Link for Download: https://renewable-carbon-initiative.com/media/library/

Perlon^® - The Filament Company - headquartered in Munderkingen, Germany, which specializes in the manufacture of synthetic filaments for the Paper-, Brush-, Cosmetics- and Dental industry buys NOWO Products Sp.z.o.o. in Kluczbork, Poland. NOWO is a leading European producer of twisted monofilaments for the global paper industry. Perlon® herewith expands its market leadership in the Paper Machine Clothing segment through this acquisition which is regarded as a vertically integrated investment for the Perlon® Group.

“With the merger of the Perlon^® Group and NOWO, we are reinforcing a company that is geared towards the global paper industry of the future and we are expanding our market leadership in this segment. NOWO is a perfect fit for the Perlon^® Group with its long-term experience and special knowledge in the production of twisted monofilaments and this complements our existing product portfolio well.” states Florian Kisling, CEO of Perlon^®.

The Perlon^® Group will take over NOWO Products with all 40 employees and production lines located in the NOWO factory in Kluczbork, Poland.

Global Fashion Summit, an international forum for sustainability in fashion, will convene core stakeholders across fashion, parallel industries, investment, policy and NGOs to forge alliances for a new era. The Summit is presented by Global Fashion Agenda, the non-profit organisation that fosters industry collaboration in fashion to drive impact, under the patronage of HRH The Crown Princess of Denmark. Global Fashion Summit: Copenhagen Edition 2022, will return in physical form on 7-8 June in the Royal Opera House, Copenhagen, Denmark.

Formerly known as Copenhagen Fashion Summit, the forum has been renamed to manifest the organisation’s global outlook and reach. Global Fashion Summit will build on the 13-year history of the renowned Copenhagen Fashion Summit by strengthening its representation and connections with diverse perspectives from across the world. Therefore, the Summit will be hosted in various key cities in the future, in addition to its flagship edition in Copenhagen.
 
Under the theme ‘Alliances for a New Era’, Global Fashion Summit: Copenhagen Edition 2022 will endeavour to form previously inconceivable alliances within the fashion industry and examine atypical cross-industry alliances, in a bid to accelerate the transition to a net positive reality.
 
The theme will underly all elements of the Summit. It will be represented on the Summit main stage during plenary sessions consisting of high-level keynote speeches and panels. These will bring together speakers that are often perceived as direct competitors to have transparent conversations about their mutual challenges and collaborate to discuss the actions needed to tackle the urgent issues. The programme will also include industries such as transportation, food and energy, to consider the challenges that are similarly experienced in other sectors and learn from successful solutions that are being demonstrated outside of fashion.
 
Going beyond the stage content, the Summit will apply the theme in practical terms by mobilising leaders to implement immediate actions through newly formed partnerships with solution providers and other industry players, setting long-term industry commitments, hosting leadership roundtables and creating binding industry agreements that will provoke progress based on its sustainability performance level.
The Innovation Forum will present a curated exhibition of sustainable solutions. Participating brands will be able to connect with exhibitors covering the entire value chain – from innovative materials to on-demand manufacturing. The forum’s Matchmaking service will offer small and large fashion businesses the opportunity to advance their sustainability journey by being matched directly with relevant solution providers.
There will be an in-depth assessment of the impact that the Summit and its resulting alliances have on the industry. This will be published in the aftermath of the event, examining the concrete outcomes from the Summit and providing a baseline for future forums.

Digitalization is a big story in the world of business. It’s all about change, making use of technology to transform attitudes and create new opportunities to grow revenue. At its heart is innovation, with new systems and intelligent use of data. In textiles, the entire value chain is going digital, as evidenced by the commitment of Swiss Textile Machinery Association member firms. Their story – presented here in six ‘chapters’ – spans industry sectors through spinning, weaving, finishing and nonwovens.

Cost savings and more
The process of digitalization in the textile industry today is continuous – faster in some segments than others – but noticeable everywhere. Automation is promising in many areas of finishing and making-up, where initial investments are being made. An example is folding of finished goods, previously a slow manual operation. Now, high-performance automatic folding machines from Swiss company Espritech deliver the potential for cost savings, unlocking new options for positive change at this most labor-intensive stage of production. For manufacturers in low-cost areas, the benefit results from its volume and is a simple financial one. In higher-cost segments, the application of this technology can be part of a completely new business model, taking production closer to the end customer.

Better process, better workplace
Pioneering in the field of digitalization embraces social responsibility along with the introduction of bold new technological innovation. That’s a commitment made by Uster, as it aims to shape future working practices in the textile industry in areas where its systems are applied. In fabric inspection, that means combining the strengths of human capabilities with the performance of Artificial Intelligence. Automatic defect classification with machine learning technology is the next leap in digitalization for fabric manufacturers, following on from automated detection of fabric faults, which is already well established in weaving and finishing mills. This will bring benefits in profitability for the manufacturer – as well as an improved working environment for their operatives, freed from repetitive tasks.

Information, flexible and fast
Access to data is critical in the digitalized world of textiles. It must be flexible, fast and secure, and available to all levels of the company – worldwide. Jakob Muller serves the narrow fabrics industry ideally with a digitalization portal, perfectly developed to provide essential production information. The portal is a browser-based production data acquisition system, with direct access to the machine controls. The system offers unique data monitoring and communication on a global framework. Digitized weave rooms present information 24/7 on desktops at the customer’s plant, as well as on tablets and smartphones remotely.

Making the most of it
Rieter takes advantage of latest digital technology to offer customers a unique experience. Their digital spinning suite helps spinners overcome their daily challenges and manage costs and efficiency more effectively. This all-in-one mill management system connects all the machinery, giving quick access to the right information and a holistic view, from bale to yarn. Users profit from full transparency, and are presented with recommendations based on long-standing experience and know-how. This is digitalization at its most practical, applied to allow spinners to make the most of their installed machinery.

Production, service, training – digital everything
As a solutions provider, Saurer puts digitalization at the core of business, integral to its technology offering to customers. Some latest examples include self-optimization of spinning machines, and a fully automated transport of cylindrical or conical cross-wound packages. These are automatically stored in an internal buffer system, for later feeding to subsequent processes. Of course after-sales service is also digital: the e-shop and machine information hub, together with the web-based training centre, ensure that knowledge is transferred to customers – turning employees into experts.

See the future system today
Autefa Solutions uses the concept of digital twinning, visualizing any real-world concept of a nonwovens line to make it easier for potential customers to grasp the idea. It’s also a big help for training and servicing needs. Most of all they digitalize important parts e.g. of a baling press line with perfectly interconnecting software tools. This is an excellent method for reducing commissioning times. Ordered bale presses reach technical readiness in the form of a digital twin, before they are commissioned in the real world. This typically halves the total time to get the line up and running.
Speaking on behalf of Swiss Textile Machinery Association members, André Imhof, CEO of Autefa Solutions Switzerland AG, says: “Making digitalization our friend opens doors for business model innovations, which is essential for our industry competitiveness. The approach is to digitalize everything that can be digitalized. We won’t stop.”

Première Vision - Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composite industry.
The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

After pre-selection of the finalists, one winner is selected in each category:

• Aerospace – Application
• Aerospace – Process
• Automotive & road transportation – surface
• Automotive & road transportation – structural
• Building & Civil Engineering
• Design, Furniture & Home
• Equipment & Machinery
• Maritime Transportation & Shipbuilding
• Sports, Leisure & Recreation
• Renewable Energy

The international jury representing the entire composites value chain includes:

• Michel COGNET, Chairman of the Board, JEC Group
• Christophe BINETRUY, Professor of Mechanical Engineering, EC Nantes
• Kiyoshi UZAWA, Professor/Director, Innovative Composite Center, Kanazawa Institute of Technology
• Jiming Sung HA, Professor, Hanyang University
• Brian KRULL, Global Director of Innovation, Magna Exteriors Inc
• Karl-Heinz FULLER, Manager Future Outside Materials, Mercedes Benz AG
• Deniz KORKMAZ, CTO, Kordsa Teknik Tekstil AS
• Henry SHIN, Head of Center, K-CARBON
• Véronique MICHAUD, Associate Professor/ Director, EPFL – Laboratory for Processing of Advanced Composites
• Alan BANKS, Lightweight Innovations Manager, Ford Motor Company
• Enzo CRESCENTI, Technical Authority and Composite Expert, Airbus

Discover the finalists in each category here.

Premium Group, important trade fair organiser in the German fashion industry and biggest player for advanced contemporary fashion in Europe, is returning to the capital and, in July 2022, is set to present a completely new live event concept around the Berlin Radio Tower and summer garden.
 
Interactive live event concept for B2B and D2C and redefines the future of fashion fairs
After decades of everything being the same, the constantly changing market environment forces brands, retailers, consumers and trade fair organisers alike to continuously develop and reposition themselves. Two years after the start of the pandemic, the Berlin-based company is now reacting with a surprising step: Anita Tillmann, Jörg Arntz and the team are bringing their passion for people, fashion, innovation and entertainment back home and setting new standards for live fashion events.
 
The creators of PREMIUM, SEEK, FASHIONTECH and THE GROUND are redesigning the sustainability of future-proof fashion fairs with the commitment of the Berlin government, and launching a completely new event concept in which the B2B and D2C sectors merge. In the new Premium Group cosmos, brands can present themselves emotionally and interactively to retailers and consumers. All realities are represented: the new kids in the industry, such as D2C brands, e-com and influencers, are given their place in the Premium Group cosmos in the form of the new fashion festival THE GROUND. But also long-standing partners of established brands and representatives from traditional stationary retail will profit from further developed B2B spaces.

Taking into account the different needs of all visitors, the events will take place from Thursday to Saturday for the first time: from 7 to 9 July 2022.
 
Classic trade fair formats are no longer up to date
'Classic trade fair formats are no longer up to date', sums up Anita Tillmann, Managing Partner of the Premium Group. 'We have to reinvent ourselves and look to the future – to a new stage in the life of the fashion industry post pandemic, which has changed everything. Digitisation, climate change, pandemic, changing values, new industry cycles and new players, as well as topics around gender equality, diversity, metaverse, gaming and NFTs, are just a few areas we are dealing with. We aim to set new standards for the future of trade events and merge B2B and D2C with our new event concept.'
 
Move to Frankfurt am Main fell victim to the coronavirus
The planned kick-off of the Premium Group Events in Frankfurt am Main could not take place because of the coronavirus, and the plan to establish the events at the new location has fallen victim to the pandemic.
 
'It's a shame that the move to Frankfurt didn't work out', says Jörg Arntz, Managing Director of the Premium Group. 'We all tried very hard and did our best. As an entrepreneur, you always have to remain capable of acting and questioning decisions that have been made. In order to do justice to our customers and the market environment, we have decided – after intensive discussions with the city of Berlin – to hold our events in our home city again. We are Berliners at heart and are confident that the new government will anchor Berlin as Europe's creative metropolis in a sustainable and economic way.'

New government brings Premium Group power back to Berlin
“Berlin is THE metropolis for the cultural and creative industries and Europe's largest start-up scene. As the new state government, we are committed to an economically strong Berlin. Trade fairs and events are an important economic factor and a centre of attraction for Berliners and guests from all over the world. We are therefore delighted that we have succeeded in bringing the events of the Premium Group back home”, says Franziska Giffey, Mayor of Berlin.
 
“The Premium Group events strengthen Berlin as a fashion and trade fair location, attract tens of thousands of trade visitors and fashion enthusiasts, create additional economic effects in hotels, gastronomy, retail and the service industry, multiply the global appeal of the city as a location and will open the summer of creativity brilliantly in July. The fact that the fair organiser is returning to its home venue with a new concept is a special opportunity for Berlin and will give the city an additional boost. Opening up the events to end consumers ideally rounds off the trade fair concept. With the Premium Group, Berlin will sustainably strengthen the core themes of fashion and digital transformation”, says Stephan Schwarz, Senator for Economics, Energy and Operations.

Promising conditions in the technical textiles and nonwovens market are expected to provide ample opportunities for suppliers at this year’s Cinte Techtextil China. The fair, which last year saw 366 exhibitors and 14,868 visits, will take place from 6 – 8 September 2022 at the Shanghai New International Expo Centre. Flexible exhibiting options will once again be available for overseas companies.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd, explained the positive conditions that exhibitors should expect at the fair thusly: “The pandemic has led to a surge in Chinese exports of both technical textiles and nonwovens, the latter in particular. The country remains the largest supplier of nonwovens, comprising one-third of the global total, yet still requires the advanced offerings of overseas machinery suppliers, as well as supplies of raw materials, to support its export production.”

Ms Wen continued: “Domestically, China is seeing increasing consumption of functional apparel, sportswear and personal protection items. Heightened health and sanitary regulations and new hygiene habits will also continue to drive demand, especially for nonwovens, well into the future. There has also been a post-pandemic boost in demand for filter, greenhouse covering and high-density fabrics amongst others. All of this adds up to a wealth of opportunities for overseas companies to take advantage of, as was experienced in the 2021 edition of the fair.”

Exhibitor and visitor experiences in 2021
“Our organisation promotes US cotton and we hope to use this platform to meet more companies and brands in the nonwovens industry who are interested in US cotton, and to meet up with old friends to discuss the current situation and industry trends. We also found some new potential clients this time.” Mr Eric Ni, Senior Manager, China Supply Chain Marketing, Fabrics, Garments and Nonwovens, Cotton Council International, USA

“Cinte Techtextil China is a professional exhibition that brings together cutting-edge technologies and products, allowing us to quickly learn about innovative technology trends in the industry. I’ve been particularly impressed by the biodegradable products in the Innovation Showcase. In addition, I am sourcing mask-related products and mops, and I have found some companies that I’m interested in.” Ms Claire Zhang, Senior Scientist, Personal Health, Philips Research China, Philips (China) Investment Co Ltd, China

Indorama Ventures Public Company Limited (IVL) was awarded “Best Sustainability-Linked Transaction & Best ESG-Linked Financing Deal of the Year” for its THB 10 billion Sustainability-Linked Bond (SLB) issued in November 2021.

The award was announced at the 15th Best Deal & Solution Awards 2021 by Alpha Southeast Asia, an institutional publication focused on investment in Southeast Asia. This recognition marks IVL's commitment to sustainable growth and ESG performance as a global leader in the chemical industry.

Yash Lohia, Chairman of ESG Council at Indorama Ventures, said, "This award reflects our long-standing commitment to sustainability and creating opportunities for investors to take part in the positive transformation of the chemical industry. This award confirms that financial markets value our ambitious sustainability and ESG efforts towards a more sustainable future.”

IVL's THB 10 billion issuance sets a new benchmark as the largest SLB transaction in Thailand and the first offered to both institutions and high-net-worth investors. The financial instrument is linked to the company's sustainability goals of reducing GHG emissions intensity by 10% by 2025, increasing recycling of PET bale input to 750,000 tons per year by 2025, and achieving 25% renewable electricity consumption in 2030.

IVL appointed Bangkok Bank, Kasikorn Bank, Krungthai Bank, Siam Commercial Bank, and the Bangkok branch of HSBC as as arrangers and bookrunners for the green transaction.

As part of their EMAS certification, the company has already been publishing an annual environmental statement since 2020, in which all relevant environmental data are available to the public. The Sustainability Report, which will also be published annually, goes one step further here - it covers not only the company's environmental performance, but also Corporate Social Responsibility as a whole.

Following this approach, the fibre experts have also created a new structure internally, which gives even more weight to the area of CSR: In future, all sustainability topics will be centrally integrated in the new CSR department (formerly HSE, Health, Safety & Environment) under the leadership of Wolfgang Ott.

• The Green Revolution: How Microfactories Can Change the Face of Fashion by Mark Sollman, Product Manager EMEA, Mimaki Europe

With the all-important COP26 Climate Change Conference having taken centre stage in November, there is no time like the present for the fashion world to rally together in stepping up sustainability efforts and getting carbon emissions under control. Globally, the fashion industry is now estimated to account for around 10 percent of greenhouse gas emissions and 20 percent of wastewater , making the pursuit of greener production methods more pertinent than ever before. Thankfully, we are seeing a new era of production enter the fashion arena, with the increasing emergence of technologically advanced, highly automated microfactories.

Along with reducing unnecessary waste through on-demand production, microfactories have a smaller ecological footprint than traditional garment production and require no water use during the production process, making it not only a faster solution, but a greener one too.

Last year’s FESPA saw Mimaki team up with fashion designer Carolina Guzman to bring her designs to life in real time at the show, setting up its own working microfactory live on-site to take her designs from screen to garment within just a day. Guzman’s designs were created using Mimaki’s TS100-1600 Sublimation Printer, before being transferred to textile, digitally cut and finally pieced together. Devised with a string of ethical and environmental objectives threaded throughout, the microfactory also exclusively utilised eco-friendly Greentex fabric, and any remaining material was donated to Sheltersuit: a wind- and waterproof coat that can be transformed into a sleeping bag, which is provided free of charge to homeless people and refugees.

Through working with a number of strategic partners – including transfer printing expert, Klieverik; paper solutions specialist, Neenah Coldenhove; and digital cutting equipment provider, Summa – Mimaki was able to produce a collection of unique, high-quality garments live on the stand during the tradeshow, demonstrating to visitors from more than 100 countries some of the key reasons that microfactories seem set to change the future of fashion…

Unparalleled speed and versatility
Where traditionally, apparel manufacturing has centred on a production chain model of sourcing materials and producing garments in bulk, microfactories are now enabling on-demand, on-location production, making it possible to create everything from unique, one-off pieces and samples right through to entire product lines – all at unprecedented speeds. This means greater flexibility and customisation, enabling designers to modify or update designs and respond to market trends as they occur.

Simplified supply chains and minimised risk
The microfactory setup brings production in-house and on-demand, minimising the cost of not only storing stock, but also of shipping it and responsibly disposing of unsold items. Where recent geopolitical events have highlighted the fragility of global supply chains, microfactories offer a unique independence from these systems, empowering garment manufacturers to future-proof their businesses, become less reliant on external systems and suppliers, and reduce the risk of disruptions.

A boosted bottom line and a greener future
Facilitating savings in a whole line of resources, from physical storage and production space to time and energy, microfactories ultimately have the potential to significantly increase profitability for garment manufacturers, with the additional benefit of being easily scalable as production increases. Perhaps even more compelling, however, are the environmental considerations. Demonstrated on a small scale through Mimaki’s recent project, the environmental benefits inherent to microfactory production will have an even greater impact as it becomes more prolific and commonplace throughout the fashion world, with the potential to effect meaningful environmental change as adoption increases in the years to come.