From the Sector

In a new study, Empa researcher Dominik Brunner, together with colleagues from Utrecht University and the Austrian Central Institute for Meteorology and Geophysics, is investigating how much plastic is trickling down on us from the atmosphere. According to the study, some nanoplastics travel over 2000 kilometers through the air. According to the figures from the measurements about 43 trillion miniature plastic particles land in Switzerland every year. Researchers still disagree on the exact number. But according to estimates from the study, it could be as much as 3,000 tonnes of nanoplastics that cover Switzerland every year, from the remote Alps to the urban lowlands. These estimates are very high compared to other studies, and more research is needed to verify these numbers

The study is uncharted scientific territory because the spread of nanoplastics through the air is still largely unexplored.

The scientists studied a small area at an altitude of 3106 meters at the top of the mountain "Hoher Sonnenblick" in the "Hohe Tauern" National Park in Austria.
Every day, and in all weather conditions, scientists removed a part of the top layer of snow around a marker at 8 AM and carefully stored it. Contamination of the samples by nanoplastics in the air or on the scientists' clothes was a particular challenge. In the laboratory, the researchers sometimes had to remain motionless when a colleague handled an open sample.

The origin of the tiny particles was traced with the help of European wind and weather data. The researchers could show that the greatest emission of nanoplastics into the atmosphere occurs in densely populated, urban areas. About 30% of the nanoplastic particles measured on the mountain top originate from a radius of 200 kilometers, mainly from cities. However, plastics from the world's oceans apparently also get into the air via the spray of the waves. Around 10% of the particles measured in the study were blown onto the mountain by wind and weather over 2000 kilometers – some of them from the Atlantic.

It is estimated that more than 8300 million tonnes of plastic have been produced worldwide to date, about 60% of which is now waste. This waste erodes through weathering effects and mechanical abrasion from macro- to micro- and nanoparticles. But discarded plastic is far from the only source. Everyday use of plastic products such as packaging and clothing releases nanoplastics. Particles in this size range are so light that their movement in the air can best be compared to gases.

Besides plastics, there are all kinds of other tiny particles. From Sahara sand to brake pads, the world is buzzing through the air as abrasion. It is as yet unclear whether this kind of air pollution poses a potential health threat to humans. Nanoparticles, unlike microparticles, do not just end up in the stomach. They are sucked deep into the lungs through respiration, where their size may allow them to cross the cell-blood barrier and enter the human bloodstream. Whether this is harmful or even dangerous, however, remains to be researched.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 90th edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the N.SVR®123SP computerized flat knitting machine as well as APEXFiz™ design software.

The N.SVR®123SP computerized knitting machine features a special loop presser bed, capable of producing hybrid inlay fabrics with both knit and weave characteristics. Demand for such novel fabrics are very high across a wide range of applications, from fashion apparel to sportswear, innerwear, outerwear, uniforms and other functional clothing, as well as home furnishing and technical textiles. Shown in 18G at the SHIMA SEIKI booth, N.SVR®123SP will also feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch. Plating can be performed within the same course and for individual needles. In combination with the loop presser and spring-type moveable sinker system even greater diversity in knit design is possible. An SVR®123SP machine in 14G with i-Plating option will also be on display at the booth of yarn spinner IAFIL S.p.A. as well.

APEXFiz™ is subscription-based design software that maintains the proven functions that have made SHIMA SEIKI’s SDS®-ONE APEX series design systems so popular with fashion designers. Installed on personal computers, those strengths are now enhanced with the added versatility to adapt to different work styles and business environments including teleworking and telecommuting. APEXFiz™ software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain.

APEXFiz™ along with SHIMA SEIKI’s yarnbank™ digital yarn web platform are featured at a special section launched at the previous session of Pitti Filati no. 89 called Pitti Studios. Pitti Studios is a content production service that yarn companies exhibiting at Pitti Filati can use for their own promotion. Yarn companies provide a piece of yarn, which is digitized on yarnbank™ and used to simulate photorealistic fabric on APEXFiz™. This is then processed by a creative studio specializing in digital content to provide static and animated 3D virtual representations. The process shows how to use the latest DX tools to provide accurate representation of a finished garment without having to produce any fabric, converting the conventionally wasteful process of sample-making into a sustainable one.

Continuing from past editions of Pitti Filati are knit samples produced in collaboration with Italian designer Vittorio Branchizio.

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

For the production of contemporary urbanwear, thought for the city, Sitip showcases the man’s suit made of jacket+trousers in warp-knit Cosmopolitan Citylife fabric: bi-stretch nylon with UV protection (UPF 50+), quick drying, easy care and skin comfort. Highly performing, breathable, comfortable, insulating and with an exceptional fit: incredible elegance and comfort that enhance the contemporary urbanwear style.

For women, Sitip presents COSMOPOLITAN Fashiontech fabrics dedicated to athleisure, with leggings made - for the summer version - in Cosmopolitan London, a bi-stretch circular knitted fabric, no seethrough, breathable, comfortable on the skin with UV protection (UPF 50+), with easy care and perfect shape retention, and - for the winter version - in Cosmopolitan Paris GZ, a circular knitted fabric raised on the reverse side, with the same properties as the previous one and thermoregulation characteristics.

The Instinct fabric is available in the recycled and raised version NATIVE INSTINCT GZ: a GRS certified thermal fabric made with pre-consumer recycled yarns, bi-stretch, breathable, resistant to pilling, easy care and high comfort, ideal for sporty knitwear and urbanwear part of the NATIVE SUSTAINABLE TEXTILES family, the Sitip fabric collection produced with GRS certified recycled yarns and low environmental impact chemicals with a lower consumption of natural resources , able to respect the environmental and social criteria extended to all the stages of the production chain, including the traceability of raw materials. Sitip also operates in line with international certifications such as OEKO-TEX®, BLUESIGN®, GRS and adheres to the ZDHC gateway, adding to these an ISO 14001 environmental management system, which certifies the company’s commitment to reducing pollution risks.

CO₂ as renewable carbon source
Carbon is the main element in numerous materials used in industrial processes and in our daily lives. It is currently mostly provided from fossil sources. But what if carbon could be used directly from CO₂ emissions? Biotechnology shows particularly great potential for the eco-effective conversion of climate-damaging CO₂ emissions into valuable basic chemicals. A consortium of 12 partners investigated this pathway in the EU-funded BioRECO₂VER project, examining the conversion of CO₂ emissions from refineries and the cement industry into the chemical building blocks isobutene (C₄H₈) and lactate (C₂H₆O₃).

Innovative chemo-enzymatic concept for CO₂ Capture
Project partner Luleå University of Technology (LTU) focused on the first process step of capturing and concentrating CO₂ from industrial point sources. Their team developed a hybrid chemo-enzymatic process consisting of a novel solvent blend and an ultrastable carbonic anhydrase (CA) enzyme. The solvent blend included an amino acid ionic liquid and a tertiary amine and displayed a good compromise between enzyme compatibility, absorption rate, capacity and desorption potential. In addition, LTU generated ultrastable enzyme mutants that showed 50% increased resistance to selected flue gas inhibitors compared to the original CA. This 3-component CO₂ capture process was scaled up in a pilot rig, and the set-up further used for real off gas pre-treatment in the project.

Two unique pilots for biotechnological CO₂ Conversion/Utilization
The biotechnological conversion of (captured) CO₂ and the co-substrate hydrogen by microorganisms poses technical and economic challenges because it takes place in the liquid phase and the substrates are gases which are poorly soluble. The BioRECO₂VER project investigated two approaches to address this: fermentation under elevated pressure and bio-electrochemistry with in situ production of hydrogen.

Pressurized fermenter
Project coordinator VITO designed a flexible and multifunctional high-pressure fermenter, customized for research activities with advanced online sensors, monitoring and control, and also including a membrane filtration unit to achieve high concentrations of the microbial biocatalysts. The set-up was broadly tested in the BioRECO₂VER project both with pure CO₂ and CO₂-rich off-gases but can also be used for investigations involving other poorly soluble gases, such as methane, oxygen, or synthesis gas. Pressures up to 10 bar can be applied.

First solely CO₂-based bio-electrochemical platform
University of Girona designed and tested a bio-electrochemical platform. The key differentiators of the pilot plant are:

• Two parallel lines to test engineered strains and bio-electrochemical systems
• Fully automated pilot plant capable to control key operational parameters (pCO₂, pO₂, pH₂, pH, Temperature) to intensify the process performance
• Solid-liquid separation unit (membrane) to recover the planktonic cells and return them into the bio-electrochemical systems.

This unique infrastructure will be used beyond the project to support further research and development activities in the broad area of CO₂ capture and conversion.

Latest trade data (January-September 2021) show a dramatic drop of imports and exports of textile goods between the EU and UK, with significant losses for companies on both sides. The situation is likely to get worse, as the full customs regime between UK and EU has entered into force on 1 January 2022. EURATEX calls on the European Union and the United Kingdom to effectively cooperate to remove the issues in the EU-UK Trade agreement that prevent smooth trade flows.  

All the sectors have been already suffering a significant loss in the past year and textiles has been no exception. Compared to the same period in 2020, between January and September the EU recorded a dramatic fall in imports (-44%, corresponding to almost € 2 billion) and in exports (-22%, corresponding to € 1.6 billion). The data show that the most impacted EU countries on the export side are Italy, Netherlands, Belgium and Germany while on the import side the most impacted countries are Germany, Ireland and France. Among the T&C sectors, clothing articles are facing the most severe drop in both imports and exports, corresponding to a total trade loss of more than € 3.4 billion over the 9 months period. Despite these alarming figures, the UK continues to be the most important export market for EU textiles and clothing.

Concerning the impact on the UK textiles sector, in May 2021 the UK Fashion and Textile Association’s (UKFT) surveyed 138 businesses, including leading UK fashion brands, UK textile manufacturers, wholesalers, fashion agencies, garment manufacturers and retailers.

The results of the survey showed that:

• 71% currently rely on imports from the EU
• 92% are experiencing increased freight costs  
• 83% are experiencing increased costs and bureaucracy for customs clearance
• 53% are experiencing cancelled orders as a result of how the EU-UK agreement is being implemented
• 41% had been hit by double duties  
• The vast majority of the surveyed companies declared they are looking to pass the increased costs on to consumer in the next  6-12 months

The above situation is expected to get worse. Since 1 January, full customs controls are being implemented. It means that export and import rules have become stricter: products should already have a valid declaration in place and have received customs clearance. Export from Britain to the EU must now have supplier declarations and the commodities codes changed.  

EURATEX calls on the European Union and the United Kingdom to effectively cooperate to address, solve and remove the issues in the EU-UK Trade agreement that currently prevent smooth trade flows between the two sides of the Channel. It is causing considerable losses for textile companies both in the EU as well as in the UK. 

Strict protective measures will make the industry meeting possible at the International Conference on Cellulose Fibres in Cologne on February 2 and 3, 2022. The latest innovations will be shocased: from hygiene and textiles to non-wovens and carbon fibre alternatives to lightweight construction applications. Online participation is also possible.

Cellulose fibres show an increasingly expanding wide range of applications, while at the same time markets are driven by technological developments and political framework conditions, especially bans and restrictions on plastics and increasing sustainability requirements. The conference provides rich information on opportunities for cellulose fibres through policy assessment, a session on sustainability, recycling and alternative feedstocks as well as latest development in pulp, cellulose fibres and yarns. This includes application such as non-wovens, packaging and composites.

Live at the conference, host nova-Institute and sponsor GIG Karasek GmbH will grand the “Cellulose Fibre Innovation of the Year” award to one of six highly interesting products, ranging from cellulose made of orange and wood pulp to a novel technology for cellulose fibre production. The presentations, election of the winner by the conference audience and the award ceremony will take place on the first day of the conference.

The conference sessions reflect the current topics of industry and research. “Strategies and Market Trends” provides an overview of the rapid development of cellulose fibres and their technological progress across the fibre market. An analysis of the key cost components of these fibres to benchmark against current cost levels will highlight future opportunities and challenges for novel textile fibres. The session will conclude with an overview of the industry's recent strategies to defossilize the fibre market.

The session “New Opportunities for Cellulose Fibres in Replacing Plastics”, focusses on questions such as: “What impact does the ban on plastics in single-use products have on the industry?” and “What are the latest regulatory issues and policy opportunities for cellulose fibres?”. This part of the conference presents new opportunities for the replacement of fossil-based insulating materials with cellulose-based technologies suitable for use in a variety of applications, from aerospace to mobility and construction.
Institutefor Ecology and Innovation

“Sustainability and Circular Economy” highlights crucial issues with regard to the overall goal of keeping the environmental impact of cellulose fibres low. A core theme of the session is the responsible use of wood and forests. With this objective, the five speakers discuss the importance of circular concepts for cellulose feedstocks. Exciting insights into the important “Hot Button Report” are offered by Canopy. The “Hot Button” report enables the producers of cellulose fibres to better understand the impact their raw materials have on forests and the climate development worldwide.

The full conference programme is available at www.cellulose-fibres.eu/program.

• More than 30 leading pioneers of the chemical and material sector welcome the latest political papers from Brussels, Berlin and Düsseldorf

The political situation for renewable carbon from biomass, CO2 and recycling for the defossilisation of the chemical and materials industry has begun to shift fundamentally in Europe. For the first time, important policy papers from Brussels and Germany take into consideration that the term decarbonisation alone is not sufficient, and that there are important industrial sectors with a permanent and even growing carbon demand. Finally, the need for a sustainable coverage of this carbon demand and the realisation of sustainable carbon cycles have been identified on the political stage. They are elemental to the realisation of a sustainable chemical and derived materials industry.

The goal is to create sustainable carbon cycles. This requires comprehensive carbon management of renewable sources, which includes carbon from biomass, carbon from Carbon Capture and Utilisation (CCU) – the industrial use of CO2 as an integral part – as well as mechanical and chemical recycling. And only the use of all alternative carbon streams enables a true decoupling of the chemical and materials sector from additional fossil carbon from the ground. Only in this way can the chemical industry stay the backbone of modern society and transform into a sustainable sector that enables the achievement of global climate goals. The Renewable Carbon Initiative’s (RCI) major aim is to support the smart transition from fossil to renewable carbon: utilising carbon from biomass, CO2 and recycling instead of additional fossil carbon from the ground. This is crucial because 72% of the human-made greenhouse gas emissions are directly linked to additional fossil carbon. The RCI supports all renewable carbon sources available, but the political support is fragmented and differs between carbon from biomass, recycling or carbon capture and utilisation (CCU). Especially CCU has so far not been a strategic objective in the Green Deal and Fit-for-55.

This will change fundamentally with the European Commission's communication paper on “Sustainable Carbon Cycles” published on 15 December. The position in the paper represents an essential step forward that shows embedded carbon has reached the political mainstream – supported by recent opinions from members of the European parliament and also, apparently, by the upcoming IPCC assessment report 6. Now, CCU becomes a recognised and credible solution for sustainable carbon cycles and a potentially sustainable option for the chemical and  material industries. Also, in the political discussions in Brussels, the term “defossilation” is appearing more and more often, complementing or replacing the term decarbonisation in those areas where carbon is indispensable. MEP Maria da Graça Carvahlo is among a number of politicians in Brussels who perceive CCU as an important future industry, putting it on the political map and creating momentum for CCU. This includes the integration of CCU into the new Carbon Removal Regime and the Emission Trading System (ETS).

As the new policy documents are fully in line with the strategy of the RCI, the more than 30 member companies of the initiative are highly supportive of this new development and are ready to support policy-maker with data and detailed suggestions for active support and the realisation of sustainable carbon cycles and a sound carbon management. The recent political papers of relevance are highlighted in the following.

Brussels: Communication paper on “Sustainable Carbon Cycles”
On 15 December, the European Commission has published the communication paper “Sustainable Carbon Cycles” . For the first time, the importance of carbon in different industrial sectors is clearly stated. One of the key statements in the paper is the full recognition of CCU for the first time as a solution for the circular economy, which includes CCU-based fuels as well. The communication paper distinguishes between bio-based CO2, fossil CO2 and CO2 from direct air capture when addressing carbon removal and it also announces detailed monitoring of the different CO2 streams. Not only CCU, but also carbon from the bioeconomy is registered as an important pillar for the future. Here, the term carbon farming has been newly introduced, which refers to improved land management practices that result in an increase of carbon sequestration in living biomass, dead organic matter or soils by enhancing carbon capture or reducing the release of carbon. Even though the list of nature-based carbon storage technologies is non-exhaustive in our view, we strongly support the paper’s idea to deem sustainable land and forest management as a basis for the bioeconomy more important than solely considering land use as a carbon sink. Surprisingly, chemical recycling, which is also an alternative carbon source that substitutes additional fossil carbon from the ground (i.e. carbon from crude oil, natural gas or from coal), is completely absent from the communication paper.

Berlin: Coalition paper of the new German Government: “Dare more progress – alliance for freedom, justice and sustainability”
The whole of Europe is waiting to see how the new German government of Social Democrats, Greens and Liberals will shape the German climate policy. The new reform agenda focuses in particular on solar and wind energy as well as especially hydrogen. Solar energy is to be expanded to 200 GW by 2030 and two percent of the country's land is to be designated for onshore wind energy. A hydrogen grid infrastructure is to be created for green hydrogen, which will form the backbone of the energy system of the future – and is also needed for e-fuels and sustainable chemical industry, a clear commitment to CCU. There is a further focus on the topic of circular economy and recycling. A higher recycling quota and a product-specific minimum quota for the use of recyclates and secondary raw materials should be established at European level. In the coalition paper, there is also a clear commitment to chemical recycling to be found. A significant change for the industry is planned to occur in regards to the so-called “plastic tax” of 80 cents per kilogram of non-recycled plastic packaging. This tax has been implemented by the EU, but most countries are not passing on this tax to the manufacturers and distributors, or only to a limited extent. The new German government now plans to fully transfer this tax over to the industry.

Düsseldorf: Carbon can protect the climate – Carbon Management Strategy North Rhine-Westphalia (NRW)
Lastly, the RCI highly welcomes North Rhine-Westphalia (NRW, Germany) as the first region worldwide to adopt a comprehensive carbon management strategy, a foundation for the transformation from using additional fossil carbon from the ground to the utilisation of renewable carbon from biomass, CO2 and recycling. For all three alternative carbon streams, separate detailed strategies are being developed to achieve the defossilisation of the industry. This is all the more remarkable as North Rhine-Westphalia is the federal state with the strongest industry in Germany, in particular the chemical industry. And it is here, of all places, that a first master plan for the conversion of industry from fossil carbon to biomass, CO2 and recycling is implemented. If successful, NRW could become a global leader in sustainable carbon
management and the region could become a blueprint for many industrial regions.

Iluna Group and Maglificio Ripa announce a strategic collaboration, each maintaining its own identity and independence, based on the complementarity of the proposal and the convergence of intentions for a new and more functional way of partnership.

Iluna Group, a leader in the production of smart lace, and Maglificio Ripa, internationally recognized for the production of premium and responsible jersey, both established in common sectors - from underwear to beachwear and sportswear - formally launched this collaboration during the MarediModa show in Cannes with a joint double stand where visitors could discover the latest collections of the two companies and also imagine new designs and solutions for sustainable fashion.

"We are living in a moment of strong change, from the wave of sustainability that is finally sweeping the fashion world to new market scenarios. And we are convinced that collaboration is the key to face these new challenges. In Maglificio Ripa we saw a complementary and unique partner with whom we can reach partners, customers and suppliers in a more complete way." comments Furio Annovazzi, CEO of Iluna Group. "Ours is not a union between companies but a new model of partnership, a sort of strategic symbiosis aimed at developing together new paths that can lead the both of us both to growth. Our collections, presented in the same context, can nurture the creativity of customers at a time when the stylistic contaminations are increasingly pronounced," adds Luca Bianco, CEO of Maglificio Ripa.
 
Furthermore, Iluna Group and Maglificio Ripa jointly created their new campaign with a photo shoot and video clip as well as jointly developed a trend scenario that allowed both companies to better embrace the evolving market by sharing information, perspectives and ideas.

INDA, the Association of the Nonwoven Fabrics Industry, announced it has updated its value proposition to grow the nonwovens industry and establish its global leadership and versality in delivering essential, environmentally-responsible materials and products.

Resulting from an extensive strategic review process guided by industry experts, the new plan positions INDA to move forward from the business challenges of COVID that impacted its ability to hold in-person events.

INDA will equip the nonwovens industry and its customers to achieve business growth by focusing resources on shaping the external environment, and fostering actionable thought leadership on crucial issues. The association will continue to strengthen its vital role of bringing together industry experts in a pre-competitive environment by organizing and leading working groups and committees to focus on areas of mutual concern.

Dave Rousse, INDA President, stated, “We enthusiastically embrace the new foundation based on five key pillars that will guide INDA activities.” These pillars are:

• Convene and connect the industry through trade shows and conferences
• Achieve industry relevance among policy makers, end users, and other key stakeholders
• Advocate for the Nonwovens Industry in public policy forums
• Deliver market insights for better decision making
• Provide training programs to sustain the industry’s innovative edge

Rousse continued, “With last month’s announcement of Tony Fragnito joining INDA as Chief Operating Officer, we are ready to implement this plan and take it into the future. I look forward to working with him to drive INDA’s continuous pursuit of excellence in providing ever greater value to our industry and our members.”

INDA has retained several outside resources to survey members and develop this plan, as well as recruit the support needed to execute the plan over the next several years.

• JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking

JEC World, the leading global trade show dedicated to composite materials, their manufacturing technologies and application markets, will take place in Paris from March 8-10, 2022, under the theme Composites for a Sustainable World. JEC World 2022 will be the industry’s most awaited international face to face event after the long pandemic period. Exhibition space is already 98% booked, a clear demonstration of the industry’s commitment to meet and resume business. Those unable to join in person will be able to experience the show via the JEC World Connect digital platform.

“We are looking forward to welcoming our exhibitors, partners and visitors back to Paris to resume business and promote innovation,” comments Thomas Lepretre, VP Events, Sales and Operations of JEC Group. “JEC World will bring the composites industry together to showcase the sustainability benefits of composite materials to a global audience, and to provide a stimulating meeting-place for the industry to pursue its sustainability ambitions by exchanging knowledge, forging collaborations, and imagining new concepts to protect our environment.”

• JEC World a unique get-together on sustainability throughout the product lifecycle
• JEC World a real composites “think tank”
• JEC World 2022 will demonstrate how sustainable thinking is at the heart of the innovative designs, technologies and business models driving the development of the next generation of composites applications.

Four conferences will be held over the three days, focusing on:

• Sustainability of Raw Materials for Composites: Fueling the Circular Revolution
• Rethinking Composite Materials Production: The Path to Sustainable Manufacturing
• Design for Circular Composite Products: Turning Waste, Recycling & Reuse into Opportunities
• Applications of Composite Materials for Circularity: Towards a Net-Zero World

Innovation is in JEC World’s DNA
One of JEC World’s objective’s is to promote the composites sector’s most innovative projects. More than 600 product launches are expected to be announced over the three days of the show, which will also feature JEC’s high-regarded innovation challenges and awards ceremonies :

• The JEC Composites Innovation Awards celebrate innovative global composite projects, as well as fruitful collaborations between different players in the value chain. Over more than 15 years, the JEC Composites Innovation Awards have highlighted collaborations between some 1,900 companies and recognized 203 creative projects. The winners will be announced on March 7th during a dedicated ceremony and their successful technologies will be on display throughout the show.

• The JEC Composites Startup Booster is the leading startup competition in the world of composites. In 2022, this competition will celebrate its fifth anniversary, with a special event to be organized onsite and the launch of a new “sustainability” award. And, with 20 finalists for 2022, it will recognize innovations with the greatest potential market impact and promote them to an influential audience of decision-makers. The finalists’ innovations will be displayed at JEC World’s “Startup Village.”

• For the first time, JEC World will host the 3rd edition of the SMC BMC Design Award organized by the European Alliance for SMC BMC. This international competition recognizes and promotes design excellence in the use of SMC and BMC materials. The theme of this edition is Sustainable Living, and the award is opento design students and young design professionals (less than 3 years of experience) living in Europe.