From the Sector

Reset
131 results
First show of ‘Best of Bangladesh’ in Europe (c) Bangladesh Apparel Exchange
24.07.2023

First show of ‘Best of Bangladesh’ in Europe

‘Best of Bangladesh’ -- the first ever sole ‘Made in Bangladesh’ show in Europe -- aims to open the doors for Europe to experience what the Bangladeshi industries has to offer.

As Bangladesh celebrates five decades of strong ties with Europe, in order to further strengthen the ties and deepen collaborations with the partners across Europe, Bangladesh Apparel Exchange, supported by the Bangladesh Embassy in the Netherlands, is organizing the event in Amsterdam, Netherlands on September 4th and 5th, 2023.

The ‘Best of Bangladesh’ aims to serve as a dynamic platform to showcase the progress and potential across diverse sectors of Bangladesh economy, especially manufacturing.

A total of 40 Bangladeshi companies each of which is the country’s best from apparel, textile, leather, Agro, jute, handicrafts, pharmaceutical, light engineering, digital industry, FMCG and bicycle will showcase their sustainable and innovative products in the Best of Bangladesh.  

‘Best of Bangladesh’ -- the first ever sole ‘Made in Bangladesh’ show in Europe -- aims to open the doors for Europe to experience what the Bangladeshi industries has to offer.

As Bangladesh celebrates five decades of strong ties with Europe, in order to further strengthen the ties and deepen collaborations with the partners across Europe, Bangladesh Apparel Exchange, supported by the Bangladesh Embassy in the Netherlands, is organizing the event in Amsterdam, Netherlands on September 4th and 5th, 2023.

The ‘Best of Bangladesh’ aims to serve as a dynamic platform to showcase the progress and potential across diverse sectors of Bangladesh economy, especially manufacturing.

A total of 40 Bangladeshi companies each of which is the country’s best from apparel, textile, leather, Agro, jute, handicrafts, pharmaceutical, light engineering, digital industry, FMCG and bicycle will showcase their sustainable and innovative products in the Best of Bangladesh.  

Bangladesh economy ranks as the world’s 37th largest now and it’s rapidly-expanding. The ‘Best of Bangladesh’ is being organized to accelerate interests and burgeoning engagements between the entrepreneurs and private sector entities on both European and Bangladeshi sides. The event has been structured to serve as a platform to showcase the multifaceted progress made and potential across diverse sectors of Bangladesh’s economy.

There will be an inaugural and 7 interactive panel sessions at the Best of Bangladesh on the topics ‘Bangladesh – Perspectives From An Emerging Economy’, ‘Bangladesh - Your Sustainable Sourcing Destination’, ‘Empowering the Future: Advancing Safety & Well-being for Garments Workforce in Bangladesh’, ‘Bangladesh Agro-Food: A Next Opportunity for Collaboration’, ‘Impact Investing - The Next Frontier’, ‘Sustainable Synergy: Circular Economy, Climate Action & Bangladesh’s Future’, and ‘Digitization and Digital Economy in Bangladesh’.

Source:

Bangladesh Apparel Exchange

(c) Kornit Digital
30.06.2023

Kornit Digital and Amaze Software: On-Demand Production and Fulfillment to Social Media Creators

Kornit Digital LTD. announced Amaze Software, Inc. – parent company of the Amaze, Spring, and Outfts platforms – has selected KornitX Workflow Solutions and Kornit MAX digital on- demand fabric and textile decoration technologies as the platform to deliver their vision. Combined with the Amaze Creator Commerce Platform, the companies will jointly bring the power of on- demand production and fulfillment to new and existing social media creators, enabling them to better monetize branded products.

Kornit’s Global Fulfillment Network helps companies like Amaze Software connect creators with high-quality garment and textile production fulfillers across the globe. The platform is backed by the KornitX workflow engine, seamlessly integrating across industry-proven Kornit MAX technology- based fabric and textile decoration systems for end-to-end production, visibility, and control.

Kornit Digital LTD. announced Amaze Software, Inc. – parent company of the Amaze, Spring, and Outfts platforms – has selected KornitX Workflow Solutions and Kornit MAX digital on- demand fabric and textile decoration technologies as the platform to deliver their vision. Combined with the Amaze Creator Commerce Platform, the companies will jointly bring the power of on- demand production and fulfillment to new and existing social media creators, enabling them to better monetize branded products.

Kornit’s Global Fulfillment Network helps companies like Amaze Software connect creators with high-quality garment and textile production fulfillers across the globe. The platform is backed by the KornitX workflow engine, seamlessly integrating across industry-proven Kornit MAX technology- based fabric and textile decoration systems for end-to-end production, visibility, and control.

The  Spring platform offers an opportunity for fans to make purchases directly from where they consume the creator’s content (social platforms including Instagram, TikTok Shops, Twitch, and more). This allows creators to significantly enhance engagement and cultivate a more profound brand presence.

Source:

Kornit Digital

Photo: pixabay
21.06.2023

Bangladesh to stage climate event for fashion and textiles

Bangladesh will stage the world’s first climate conference for the fashion industry this autumn, on 12 October. The Bangladesh Climate Action Forum will convene policy makers, garment manufacturers, fashion retailers and other industry stakeholders to look at solutions for decarbonising global textile supply chains.

The event will focus on technological and financial challenges around reducing emissions. Most of the world’s leading fashion brands have now set ambitious targets for reducing supply chain emissions. These targets relate to 2030 by which time many brands aim to reduce emissions by 50 per cent, and 2050 where most fashion brands aim to be carbon neutral.

The Bangladesh Climate Forum Action will examine causes of climate crisis, its urgency, impacts we have already seen, and what we can expect under both businesses as usual and rapid decarbonisation scenarios.

Bangladesh will stage the world’s first climate conference for the fashion industry this autumn, on 12 October. The Bangladesh Climate Action Forum will convene policy makers, garment manufacturers, fashion retailers and other industry stakeholders to look at solutions for decarbonising global textile supply chains.

The event will focus on technological and financial challenges around reducing emissions. Most of the world’s leading fashion brands have now set ambitious targets for reducing supply chain emissions. These targets relate to 2030 by which time many brands aim to reduce emissions by 50 per cent, and 2050 where most fashion brands aim to be carbon neutral.

The Bangladesh Climate Forum Action will examine causes of climate crisis, its urgency, impacts we have already seen, and what we can expect under both businesses as usual and rapid decarbonisation scenarios.

Also presenting at the event will be the Government of Bangladesh, which will address Bangladesh’s actions to mitigate the impacts of the climate crisis. Bangladesh is particularly vulnerable to climate change and is ranked the seventh extreme disaster risk-prone country in the world according to a report from the Global Climate Risk Index 2021. Tropical cyclones, tornadoes, floods, coastal and riverbank erosion, droughts and landslides are the major climate-induced hazards in Bangladesh.

The Bangladesh Climate Forum Action will also look at approaches towards decarbonization, including NetZero goals and timelines. Speakers will discuss globally recognised pathways for electricity/transportation/industry decarbonisation.

Renewable energy will also be under discussion. If fashion brands are to hit climate targets, it is imperative that supply chains switch to renewable energy and away from gas and fossil fuels. The event will look at challenges around the de-carbonisation of the electricity grid in Bangladesh, as well as the rate of transition toward renewable resources by garment factories, including solar power.

A key element of the event will be evaluation of practical solutions for Bangladesh’s RMG industry. It will profile specific solutions such as energy efficiency, machine upgrades, the electrification of thermal loads, direct power purchase agreements and biomass fed thermal systems. It will also discuss the challenges faced in the industry including business climate (and cycles), pricing, financing challenges, target setting and execution, policy opportunities, knowledge gaps and availability/scaling of solutions.

Financial challenges around decarbonisation of supply chains are significant, and it is far from clear who will pay for the technological upgrades required. While some investment support systems exist – such as lower interest financing – these are not always available, accessible or affordable for the majority of the RMG companies.

The event will explore financial options, changes to business/pricing models, opportunities for de-risking/underwriting investments, direct investment and other tools that need to emerge to address financial challenges and plug the funding gap. The event will also explore opportunities to decouple climate action from business cycles so that the 2030 targets can be met.

Source:

Bangladesh Apparel Exchange

(c) Kornit Digital
09.06.2023

Kornit Digital presents Enhanced Presto MAX at ITMA

Kornit Digital LTD., a leader in sustainable, on-demand digital fashionx and textile production technologies, announced the Company is taking the power of digital fashion to new heights with enhancements to the Kornit Presto MAX system for digital fabric decoration on demand.

Designed with the fashion and home décor industry in mind, the enhanced solution presents innovative capabilities for transforming virtual concepts into custom fabrics, supplementing digital efficiency and quality with white printing on colored fabrics. The new NeoPigmentTM Vivido ink achieves darker, deeper blacks and colors and establish new fashion standards with a pigment-based process. Kornit’s patented solution offers a streamlined and completely dry process for the a sustainable fabric decoration.

Kornit Digital LTD., a leader in sustainable, on-demand digital fashionx and textile production technologies, announced the Company is taking the power of digital fashion to new heights with enhancements to the Kornit Presto MAX system for digital fabric decoration on demand.

Designed with the fashion and home décor industry in mind, the enhanced solution presents innovative capabilities for transforming virtual concepts into custom fabrics, supplementing digital efficiency and quality with white printing on colored fabrics. The new NeoPigmentTM Vivido ink achieves darker, deeper blacks and colors and establish new fashion standards with a pigment-based process. Kornit’s patented solution offers a streamlined and completely dry process for the a sustainable fabric decoration.

At ITMA 2023, Kornit will also be displaying an end-to-end partner ecosystem – underscoring how integrated solutions ensure a smooth transition towards a digital infrastructure and enable long-term business growth. Highlighting the power of partnership alongside Kornit is Greentex.co, a supplier of textiles and apparel leveraging digitally enabled, eco-friendly waterless printing. The company will be showing Presto MAX with fabrics highlighting the depth of black inks. Working alongside Kornit, Zünd will demonstrate how its modular cutting systems is the foundation for an end-to-end “eco factory,” completing fashion decorated by Presto MAX with their digital cutting solutions. Pentek Textile Machinery joins to display the possibilities for inline, sustainable softening of fabrics for unique and demanding applications.

(c) Lenzing AG
01.06.2023

Lenzing celebrates 40th anniversary of LENZING™ Acetic Acid Biobased

Lenzing Group, a global producer of wood-based specialty fibers, is celebrating the 40th anniversary of its biorefinery and co-product brand LENZING™ Acetic Acid Biobased. The brand was first introduced on May 4, 1983, and has since become one of the leading and most trusted biobased acetic acid providers.

Over the past 40 years, LENZING™ Acetic Acid Biobased, which has a reduced carbon footprint that is 85% lower than that of fossil-based acetic acid, has continued to gain trust and support from customers. Specialty chemical company Evonik, and food production company Speyer & Grund Group, have been incorporating LENZING™ Acetic Acid Biobased in the production of their products since 1983. LENZING™ Acetic Acid Biobased has also been in high demand from the hygiene industry during the COVID-19 pandemic as an all-purpose cleaning agent in conventional and green products.

Lenzing Group, a global producer of wood-based specialty fibers, is celebrating the 40th anniversary of its biorefinery and co-product brand LENZING™ Acetic Acid Biobased. The brand was first introduced on May 4, 1983, and has since become one of the leading and most trusted biobased acetic acid providers.

Over the past 40 years, LENZING™ Acetic Acid Biobased, which has a reduced carbon footprint that is 85% lower than that of fossil-based acetic acid, has continued to gain trust and support from customers. Specialty chemical company Evonik, and food production company Speyer & Grund Group, have been incorporating LENZING™ Acetic Acid Biobased in the production of their products since 1983. LENZING™ Acetic Acid Biobased has also been in high demand from the hygiene industry during the COVID-19 pandemic as an all-purpose cleaning agent in conventional and green products.

Pioneering a carbon neutral future in the biorefinery segment with a new offering
To mark the important occasion, Lenzing will introduce its first carbon neutral LENZING™ Acetic Acid Biobased to meet the growing sustainability needs of industries which predominately rely on fossil-based materials. Similar to the standard LENZING™ Acetic Acid Biobased, the carbon neutral LENZING™ Acetic Acid Biobased is produced using sustainably sourced beech wood as a universal replacement for non-renewable raw materials such as crude oil. By calculating, reducing and offsetting emissions during production processes, this expansion will create a more sustainable supply chain with highly functional products across various industries. From now on, Lenzing customers across the food, pharmaceutical, cosmetics, chemical and textile industries will be able to choose between carbon neutral and reduced carbon footprint acetic acid products.

Advancing circularity and carbon neutrality through efficient use of valuable resources
Lenzing’s biorefinery concept ensures that 100% of wood components are used to produce pulp for Lenzing’s botanic fibers, biorefinery products, as well as bioenergy, which is used to power Lenzing’s facilities. This makes Lenzing’s biorefinery sites almost fully energy self-sufficient to remain as carbon neutral as possible. To ensure a low carbon footprint, rail transportation is the preferred means for transporting LENZING™ biorefinery products, with trucks being leveraged in regions where rail transportation is not available.

Together with ClimatePartner, a recognized global leader in the design, development, and delivery of corporate climate action programs, Lenzing strives to reduce carbon emissions to net-zero through a mix of higher production efficiencies, use of renewable energy sources, low-carbon materials, and the dedicated support of an external nature-based carbon removal project. For instance, to offset remaining carbon emissions that cannot be reduced, Lenzing works with ClimatePartner to support and finance the switch to biomass as an energy source at a ceramic factory in Kitambar in northeastern Brazil. Using natural waste materials, like coconut shells, as renewable biomass for its energy production, the factory is able to produce roof tiles in a more climate-friendly way while saving on carbon emissions. Besides contributing to the fuel switch, the project also helps to reduce the deforestation rate in Brazil and avoid methane emissions that could result from the uncontrolled rotting of biomass.

More information:
Lenzing biobased acetic acid
Source:

Lenzing Group

21.04.2023

DyStar announces Restructuring Plan for Ludwigshafen Plant Facility

DyStar announces the plan to restructure its Ludwigshafen facility located in Germany. The strategic decision is made by the company in response to changing business conditions and market shifts.

Mr. Xu Yalin, Managing Director, and President of DyStar Group said, “This is an important strategic move for DyStar. We will focus on developing key emerging markets, which have been shifting over a decade. In the wake of higher energy costs and inflation, DyStar is determined to further improve cost efficiency and drive sustainable productivity as we continue to deliver the highest quality of innovative products that support the global supply chain.”

Mr. Eric Hopmann, Chief Commercial Officer of DyStar Group said, “The restructuring of this facility will be carried out in a phased manner. DyStar will diversify the production activity out of Europe and start with the reduction of manpower as a consequence. DyStar’s customers can be further assured of undisrupted supply, hence their production should not be affected as we will work closely to meet their specific requirements.”

DyStar announces the plan to restructure its Ludwigshafen facility located in Germany. The strategic decision is made by the company in response to changing business conditions and market shifts.

Mr. Xu Yalin, Managing Director, and President of DyStar Group said, “This is an important strategic move for DyStar. We will focus on developing key emerging markets, which have been shifting over a decade. In the wake of higher energy costs and inflation, DyStar is determined to further improve cost efficiency and drive sustainable productivity as we continue to deliver the highest quality of innovative products that support the global supply chain.”

Mr. Eric Hopmann, Chief Commercial Officer of DyStar Group said, “The restructuring of this facility will be carried out in a phased manner. DyStar will diversify the production activity out of Europe and start with the reduction of manpower as a consequence. DyStar’s customers can be further assured of undisrupted supply, hence their production should not be affected as we will work closely to meet their specific requirements.”

The facility has been an integral part of DyStar’s global network. DyStar inherited this facility from their founders who started the Indigo research and manufacturing more than 125 years ago.

19.04.2023

KT® Kinesiology Tape with CELLIANT® Infrared Technology

KT®, a kinesiology tape brand, launched KT Tape PRO Oxygen – the first kinesiology tape to feature CELLIANT® Infrared Technology from Hologenix. KT Tape PRO Oxygen is designed to increase cellular oxygenation and promote muscle support during physical activity.

The CELLIANT fine mineral powder is a natural blend of IR-generating bioceramic minerals. Printed on the tape’s surface, it converts body heat into full-spectrum infrared energy. This delivers improved cellular oxygenation where tape is applied, bringing more oxygen to the cells and increasing local circulation. Thus, KT Tape PRO Oxygen premium kinesiology tape is super-charged to support muscles and joints through physical activity.

KT Tape PRO Oxygen was designed to allow athletes pushing their physical limits to optimize athletic performance while staying healthy. KT Tape PRO Oxygen’s elasticity allows for a full range of motion that rigid tapes do not and helps to lift the skin for a temporary increase in local blood flow. PRO Oxygen incorporates high strength water-resistant adhesive and ultrabreathable PRO synthetic fibers making it one of the most durable kinesiology tape products on the market.

KT®, a kinesiology tape brand, launched KT Tape PRO Oxygen – the first kinesiology tape to feature CELLIANT® Infrared Technology from Hologenix. KT Tape PRO Oxygen is designed to increase cellular oxygenation and promote muscle support during physical activity.

The CELLIANT fine mineral powder is a natural blend of IR-generating bioceramic minerals. Printed on the tape’s surface, it converts body heat into full-spectrum infrared energy. This delivers improved cellular oxygenation where tape is applied, bringing more oxygen to the cells and increasing local circulation. Thus, KT Tape PRO Oxygen premium kinesiology tape is super-charged to support muscles and joints through physical activity.

KT Tape PRO Oxygen was designed to allow athletes pushing their physical limits to optimize athletic performance while staying healthy. KT Tape PRO Oxygen’s elasticity allows for a full range of motion that rigid tapes do not and helps to lift the skin for a temporary increase in local blood flow. PRO Oxygen incorporates high strength water-resistant adhesive and ultrabreathable PRO synthetic fibers making it one of the most durable kinesiology tape products on the market.

Source:

Hologenix

(c) IFCO
10.03.2023

Successful third edition of Istanbul Fashion Connection

The third edition of IFCO Istanbul Fashion Connection took place from 8 to 11 February 2023. At the largest IFCO to date, 588 exhibitors in a total of 9 halls at the Istanbul Expo Center met more than 10,000 international trade visitors from 134 countries such as Brazil, Canada, Chile, Colombia, Germany, Malaysia, Mexico, Nigeria, Panama, Saudi Arabia, South Africa, South Korea, Thailand, UK, United Arab Emirates. 45% of the visitors were from 134 countries and 55% of visitors were domestic. The largest group of foreign visitors came from Asia (33%), Middle East (33%), Europe (19%) and Africa (13%).

Divided into clear cut exhibition segments on a total of 100,000 sqm of exhibition space brands and manufacturers showed the latest collections from the areas of womenswear, menswear, kidswear, denim, sportswear, evening and weddingwear, lingerie, hosiery, leather & furs.

The third edition of IFCO Istanbul Fashion Connection took place from 8 to 11 February 2023. At the largest IFCO to date, 588 exhibitors in a total of 9 halls at the Istanbul Expo Center met more than 10,000 international trade visitors from 134 countries such as Brazil, Canada, Chile, Colombia, Germany, Malaysia, Mexico, Nigeria, Panama, Saudi Arabia, South Africa, South Korea, Thailand, UK, United Arab Emirates. 45% of the visitors were from 134 countries and 55% of visitors were domestic. The largest group of foreign visitors came from Asia (33%), Middle East (33%), Europe (19%) and Africa (13%).

Divided into clear cut exhibition segments on a total of 100,000 sqm of exhibition space brands and manufacturers showed the latest collections from the areas of womenswear, menswear, kidswear, denim, sportswear, evening and weddingwear, lingerie, hosiery, leather & furs.

In the new high-quality designer area The CORE İSTANBUL, internationally renowned designers from Istanbul Fashion Week presented their exciting and creative designs.
“The Core is the premier platform that connects local fashion designers with the international fashion market. Our mission is to showcase the work of Istanbul´s talented designers who are dedicated to creating unique and innovative fashion designs while embracing conscious and sustainable practices.”, says Günes Güner, curator of The Core.

Even more design power was on display at the KOZA Design Competition for young fashion creators. IMA Istanbul Moda Akademisi was responsible for the design of the IMA LAB trend zone at IFCO. In the creative space, the trends and themes of the coming season were taken up and presented in a visually elaborate way. Euphoric Recall encompasses colourful, playful 70's vibes, Metasphere describes the return of glitter and metallic with a futuristic touch. The New Gen area featured pieces by up-and-coming designers of the next generation.

In two separate halls, LinExpo gave an overview of lingerie and hosiery. As a part of IFCO 145 manufacturers presented themselves here.

A large selection of high-quality bridal and evening dresses and suits were shown in the FashionIST area.

In the IFCO Sourcing area, especially designed for production, trade visitors networked directly with international production companies such as Bozkurt, Bilce Tekstil, Gelişim, Karar, Cemsel, Bozpa, Demezoğlu, Zevigas and more.

The next IFCO is scheduled from August 9 to 11, 2023.

Source:

IFCO

(c) MUNICH FABRIC START
13.01.2023

MUNICH FABRIC START announces programme for upcoming event

The Munich Fabric Start Exhibitions GmbH announces the programme for the upcoming editions of MUNICH FABRIC START (24 to 26 January 2023) and BLUEZONE & KEYHOUSE (24 and 25 January 2023).
From 24 to 26 January 2023, visitors can expect a range of the latest trends, fabric, accessories and denim highlights from around 900 international exhibitors, an event programme with expert panels, keynotes and trend lectures, as well as numerous networking opportunities.

Economic Environment
Conflicts, inflation, recession, energy crisis, massive inequality, climate change - how companies can position themselves securely in a volatile market environment - this is deciphered by trend analyst David Shah in his key note "Self-Empowerment" and numerous industry experts, futurologists and leading fashion editors in the lecture series "The Status Quo of Fashion" by strategy and communication consultants Alex Vogt and Jana Kern.

The Munich Fabric Start Exhibitions GmbH announces the programme for the upcoming editions of MUNICH FABRIC START (24 to 26 January 2023) and BLUEZONE & KEYHOUSE (24 and 25 January 2023).
From 24 to 26 January 2023, visitors can expect a range of the latest trends, fabric, accessories and denim highlights from around 900 international exhibitors, an event programme with expert panels, keynotes and trend lectures, as well as numerous networking opportunities.

Economic Environment
Conflicts, inflation, recession, energy crisis, massive inequality, climate change - how companies can position themselves securely in a volatile market environment - this is deciphered by trend analyst David Shah in his key note "Self-Empowerment" and numerous industry experts, futurologists and leading fashion editors in the lecture series "The Status Quo of Fashion" by strategy and communication consultants Alex Vogt and Jana Kern.

Next to David Shah (View-Publications), the panel will include Siems Luckwaldt (CAPITAL and BUSINESS PUNK, RTL Germany), Shamin Vogel (WeAr Global Magazine), Ben Hanson (The Interline), Maria Cristina Pavarini (The SPIN OFF) and Carl Tillessen (DMI)

Digital Era
From digital colour apps, digital twins and virtual models to 3D simulation and virtual dressing rooms - the world of digital fashion will not only be discussed in numerous lectures in Munich, but also brought to life in the new Assyst Experience. Whether it's Carola Seybold, Head of Global Key Accounts at Pantone, Jan Hilger from Roland Berger, Arndt Johannes from Verce, Dr. Stefan Hauswiesner, CEO of Reactive Reality or the experts of the panel "Textilfabrik X.0 - New Marketing Buzz Words or One Step Ahead": everyone will be looking at virtual fashion from a different angle and providing insights into the latest state of the art. In her trend presentation "The weird & wonderful world of fashion cores" at BLUEZONE, Angela Velasquez (Rivet) sheds light on how viral TikTok trends are reshaping denim merchandising.

Sustainable Future
Digitisation and sustainability - the third major theme of the event programme - could not be more closely intertwined. Lisa Lang, Director of Policy & EU Affairs Orchestrator of EIT Climate KIC in an interview with Muchaneta ten Napel (Shape Innovate) kicks things off about the importance of a green transformation for the industry. Other topics in focus: Liv Simpliciano from Fashion Revolution gives an overview of where the world's biggest fashion brands and retailers stand in terms of transparency. Tricia Carey from Renewcell, David Shah (View-Publications), Lien van der Schueren and Guy Buyle (CISUTAC & HEREWEAR), Mateusz Wielopolski (Circulix) and Mario Malzacher (Circular.Fashion) critically discuss whether the circular economy is really the solution for everything or just a placebo. Circular ecosystems are also presented by Franziska von Becker from Hachmeister & Partner.

The race of the new sustainable materials of the future will be opened by Kirsi Terho from Infinited Fiber, Kuben Edwards from Onezero8, Marianne Uddman from Trustrace and Simon Angel, Sustainable Innovations Curator of MUNICH FABRIC START in a panel discussion with Muchaneta ten Napel (Shape Innovate). New products for a sustainable future in the denim industry will be discussed at BLUEZONE.
Another highlight: In cooperation with the Transformers Foundation, an expert panel will also be held at BLUEZONE on both days of the trade show.

Trends Spring.Summer 2024
Gerd Müller-Thomkins, Carl Tillessen and Niels Holger Wien from the Deutsches Mode Institut (DMI) see a "vibe shift" - a turning point. They will analyse what this means for fashion in their trend presentation on Wednesday. The Women's Fashion Trends SS 24 with the must haves of the season will be analysed by Karin Schmitz from the Trend Forecast Institute Peclers Paris - from the glamorous appearance in everyday life, to the play with gender identity, to simplicity combined with functionality and mobility.

Source:

MUNICH FABRIC START / KERN. Consulting

09.01.2023

Shelton Vision AI: Tailored machine learning solutions for the textiles industry

Over the past three years, a dedicated AI development team at BTMA member Shelton Vision has been developing tailored machine learning solutions for the textiles industry.

The aim has been to elevate the detection process and the accuracy of naming and grading subtle defects in textiles, in real time within production environments.

“Big Data ‘off-the-shelf’ systems such as those behind technolgies like facial recognition and Google Maps involve reading many thousands of single images each second and simply take too long to accumulate sufficient data for what’s required in this specific case,” says Shelton Vision CEO and Managing Director Mark Shelton. “A feature of the textile industry is that in many sectors, the product range changes several times within a year and it is not uncommon to have to inspect hundreds, if not thousands of different styles in a year based on precise settings.”

In terms of defect types, he adds, there may typically be over 100 that need to be accurately detected, classified (named) and graded in real time.

Over the past three years, a dedicated AI development team at BTMA member Shelton Vision has been developing tailored machine learning solutions for the textiles industry.

The aim has been to elevate the detection process and the accuracy of naming and grading subtle defects in textiles, in real time within production environments.

“Big Data ‘off-the-shelf’ systems such as those behind technolgies like facial recognition and Google Maps involve reading many thousands of single images each second and simply take too long to accumulate sufficient data for what’s required in this specific case,” says Shelton Vision CEO and Managing Director Mark Shelton. “A feature of the textile industry is that in many sectors, the product range changes several times within a year and it is not uncommon to have to inspect hundreds, if not thousands of different styles in a year based on precise settings.”

In terms of defect types, he adds, there may typically be over 100 that need to be accurately detected, classified (named) and graded in real time.

“Added to this is the need to ‘filter out’ the random occurrence of ‘non defects’, such as loose threads, lint and dust on the surface – the number of which can be higher than actual defects – and it is clear that a bespoke system is required.”
The development team has consequently established metadata for identifying defect properties, enabling the successful identification of faults from a much smaller number of images.

“The system employs a unique combination of machine learning for automated style training and novel algorithms for defect detection, to provide high quality images for the AI real time defect classification and grading software,” Shelton explains. “Due to the inherent variation in fabric features – raw materials, construction, texture, colour and finishes, as well as the differing product quality standards in value chains and the regional variations in what defects are called – our AI engine uses models built for each individual company or group of companies, or product value chain.”

The AI models are constructed so that the user operatives can populate them with their own data produced by the vision system or by obtaining defect images from another imaging source (eg a mobile phone camera).  

The occurrence of defects is sporadic and many defect types occur infrequently, although when they do, they can have severe consequences. These scenarios re-enforce the need for the AI engine to be quickly set up and able to operate accurately with limited data sets of typically between 30 and 50 good quality images per defect type.

A further feature is a tool enabling the user to periodically ‘clean up’ the AI data during the set up phase. This is used to resolve conflicting data and to correct mis-named images.

Generally, the highest cost component of fabric production is the raw material and in addition to finished product inspection, a cost effective use for vision systems is in process operation.

Generally, the highest cost component of fabric production is the raw material and in addition to finished product inspection, a cost effective use for vision systems is in process operation.

“There is a need for the real time detection of defects that are being created in separate processes, such as printing or coating and for real time automated systems that can accurately determine the defects and their severity and provide a reliable signal for an operative to rectify the issue, This can result in considerable savings.

Prior to Shelton introducing powerful customised machine vision and real time defect classification, the only systems available were those that required manual sifting through vast numbers of images, which included both real defects and ‘non defect’ images. The task was very often overwhelming and did not provide much benefit beyond manual fabric inspection.

More information:
Shelton Vision fabric inspection
Source:

AWOL for British Textile Machinery Association (BTMA)

30.12.2022

Composites United declares membership in Composites Germany

Society and the economy are facing existential challenges. In addition to the consequences of climate change, these include the realisation that energy and many resources are no longer available in the usual quantities, so that their efficiency must be significantly increased in the short term. Lightweight construction, especially with fibre composite materials, can and will make an important contribution here, e.g. in wind power plants or hydrogen storage systems. As an umbrella organisation, Composites Germany represents the capabilities and interests of the German fibre composite industry. With the re-entry of Composites United, Composites Germany will combine the forces of the two leading composites networks in Germany and its position will be significantly strengthened. Changed framework conditions make the re-entry possible and necessary.

Society and the economy are facing existential challenges. In addition to the consequences of climate change, these include the realisation that energy and many resources are no longer available in the usual quantities, so that their efficiency must be significantly increased in the short term. Lightweight construction, especially with fibre composite materials, can and will make an important contribution here, e.g. in wind power plants or hydrogen storage systems. As an umbrella organisation, Composites Germany represents the capabilities and interests of the German fibre composite industry. With the re-entry of Composites United, Composites Germany will combine the forces of the two leading composites networks in Germany and its position will be significantly strengthened. Changed framework conditions make the re-entry possible and necessary.

VDMA and Leichtbau BW will continue to support the work of Composites Germany as associate members and contribute the know-how of their members. Together, the organisations will promote sustainable lightweight construction as a key technology for Germany, focusing on composites materials, says Prof. Klaus Drechsler of Composites United, one of the two board members of Composites Germany. As a network and mouthpiece of the composites industry, Composites Germany bundles the interests of its members. The aim is to continuously expand activities, promote innovations and technologies, develop new markets and new value chains, and anchor training and further education, adds his board colleague Dr Michael Effing of AVK. The agreement was concluded on 29 November 2022 during the JEC Forum DACH in Augsburg, where both associations were cooperation partners of the event.

Source:

Composites Germany

(c) Willy BOGNER GmbH
21.12.2022

Bogner: FIRE+ICE X POW launches the GREGORY VARSITY SKI JACKET

FIRE+ICE and POW (Protect our Winters) celebrate an exclusive collaboration to protect the climate. POW advocates for sustainable winter sports with the goal to bring outdoor enthusiasts and climate protection together.

The unisex “GREGORY VARSITY SKI JACKET” features an exclusive print by renowned American artist Gregory Siff and is limited to 350 pieces. True to FIRE+ICE's DNA, the jacket is a mix of style and performance: a casual varsity jacket with special technical features that guarantee best performance. The jacket is sustainably made from ethically sourced wool and recycled nylon, which is also windproof and waterproof.

FIRE+ICE and POW (Protect our Winters) celebrate an exclusive collaboration to protect the climate. POW advocates for sustainable winter sports with the goal to bring outdoor enthusiasts and climate protection together.

The unisex “GREGORY VARSITY SKI JACKET” features an exclusive print by renowned American artist Gregory Siff and is limited to 350 pieces. True to FIRE+ICE's DNA, the jacket is a mix of style and performance: a casual varsity jacket with special technical features that guarantee best performance. The jacket is sustainably made from ethically sourced wool and recycled nylon, which is also windproof and waterproof.

Source:

Willy BOGNER GmbH

Graphic Euratex
16.12.2022

European textiles industry extremely concerned about the fast loss of competitiveness

  • Potential loss of competitiveness, caused by the EU’s inaction of the energy crisis, and Chinese and US subsidies to domestic industry

Following yesterday’s European Council summit and its conclusions on the measures to tackle the energy crisis, the European textiles industry is extremely concerned about the fast loss of competitiveness of Europe and demands urgent action to save the industry.

The chain of factors determining this sharp decline in competitiveness is twofold. First, the energy cost in Europe is more than 6 times higher than in the US, China, and neighbouring countries. This factor alone has almost erased the business case for producing in the EU. At present, many textiles and clothing companies are producing at net loss or have shut down production. The industrial conditions have worsened in such a way that there is no business case to invest in Europe or buy products produced or processed in the EU. It is only the sense of responsibility of the entrepreneurs towards the European society that is keeping the plants and production running.

  • Potential loss of competitiveness, caused by the EU’s inaction of the energy crisis, and Chinese and US subsidies to domestic industry

Following yesterday’s European Council summit and its conclusions on the measures to tackle the energy crisis, the European textiles industry is extremely concerned about the fast loss of competitiveness of Europe and demands urgent action to save the industry.

The chain of factors determining this sharp decline in competitiveness is twofold. First, the energy cost in Europe is more than 6 times higher than in the US, China, and neighbouring countries. This factor alone has almost erased the business case for producing in the EU. At present, many textiles and clothing companies are producing at net loss or have shut down production. The industrial conditions have worsened in such a way that there is no business case to invest in Europe or buy products produced or processed in the EU. It is only the sense of responsibility of the entrepreneurs towards the European society that is keeping the plants and production running.

Secondly, while the EU is passive and extremely slow in articulating a credible and effective response to the energy crisis, the main international competitors and trade partners (China, India and the US respectively) have developed comprehensive state-aid frameworks for their domestic industry despite not being affected by this crisis at all. The latest example is the 369-billion-dollar scheme of the Inflation Reduction Act rolled out by the Biden administration.

Recent trade data  already indicate a loss of global competitiveness: imports to the EU have grown tremendously in 2022 (+35% year-to-date). It is also evident that the surge in imports goes in parallel with the surge of natural gas price. It is expected that energy prices will remain high and volatile, opening the door for imports to gain substantial market shares in the EU.

The chart indicates the development of the Title Transfer Facility (TTF) until September 2022 since Eurostat data for Q4 2022 has not been published yet. Euratex is aware that the market situation has eased somewhat since in the past months, but the crisis remains because gas prices are still extremely high in comparison to last year. This suggests that the current loss of competitiveness of the EU manufacturing will not be recovered even with lower energy prices, unless measures are taken to correct the unlevel playing field on which the EU industry has to operate in the international markets. Only with an ambitious and comprehensive relaunch plan at EU level, Europe will be able to restore its credibility as a global manufacturing powerhouse and investments.

If the status quo is maintained, not only the EU will not be able to recover its competitive position on the global business stage, but it will also fail its plans to reach zero-net emissions and achieve circularity. It is evident that these ambitions - that the industry is passionately supporting - need massive capital investments. However, in the current scenario an investments diversion can only be expected to markets where governments are actively supporting those investments and energy costs are much lower – regardless of their fossil- or non-fossil origin.

The European textiles industry – the whole value chain, from fibres, nonwoven, to fabrics, clothing manufacturers - are facing unprecedented pressure deriving from the current geopolitical situation, the new macroeconomic conditions and unfair competition from third states. The situation is going to worsen if no emergency action is taken, especially because a recession is expected in the coming months.

The main structural component of the EU manufacturing are SMEs: these are economic actors that are particularly exposed to the current crisis as they do not have the financial leverage to absorb the impact of energy prices for much longer. Urgent EU action is needed to ensure their survival.

EURATEX calls on the EU political leaders in the Commission, in the European Council and in the national capitals to:

  1. Raise the ambition and adopt a comprehensive approach at EU level: energy, state-aid and trade policy must be brought together in a single strategy with concrete emergency solutions and with a clear SME dimension;
     
  2. Let all hesitations aside and adopt a meaningful price cap on natural gas wholesales, that should be ideally no higher than 80 euro/MWh. In parallel, it should also be ensured that electricity prices are brought to a sustainable price level;
     
  3. Change the European posture on state-aid, even temporarily. An ambitious plan of investments and state-aid in green technologies to support the industrial transition should be rolled out.

Such a plan, however, should not be conceived as a retaliation against our most necessary and like-minded trade partners. Access to finance and markets must be safeguarded for all those actors who are capable and willing to invest in Europe, on the basis of reciprocity. In   these challenging times for geopolitical stability, ensuring strong trade ties with our traditional allies and partners is of utmost importance. The roll-out of an investment and state aid plan should not interfere, but rather support, the dialogue with the US (and other partners) and the deepening of our trade and investment partnership. Such a dialogue should be accelerated in the context of the TTC as well as at WTO level.

Source:

Euratex

(c) Hologenix, LLC
15.11.2022

Medline and Hologenix launch new orthopedic infrared products

Medline, a medical product distributor and manufacturer, together with Hologenix® launched a new line of CURAD® Performance Series® orthopedic products powered by CELLIANT® infrared technology.

CELLIANT, the flagship innovation of Hologenix, is a proprietary blend of natural minerals that allows textiles to convert body heat into infrared energy, returning it to the body and temporarily increasing local blood flow and cellular oxygenation. This has been clinically demonstrated to support recovery from physical activity and fatigue, increase endurance and stamina, and boost overall performance in healthy individuals, among other benefits.  

Trusted by athletes, CURAD is the Official Medical Supplier of the IRONMAN® U.S. Series. The new orthopedic products powered by CELLIANT infrared technology are the latest additions to the CURAD Performance Series collection and including different infrared supports designed for the ankle, knee, back, shoulder, as well as multipurpose use.

Medline, a medical product distributor and manufacturer, together with Hologenix® launched a new line of CURAD® Performance Series® orthopedic products powered by CELLIANT® infrared technology.

CELLIANT, the flagship innovation of Hologenix, is a proprietary blend of natural minerals that allows textiles to convert body heat into infrared energy, returning it to the body and temporarily increasing local blood flow and cellular oxygenation. This has been clinically demonstrated to support recovery from physical activity and fatigue, increase endurance and stamina, and boost overall performance in healthy individuals, among other benefits.  

Trusted by athletes, CURAD is the Official Medical Supplier of the IRONMAN® U.S. Series. The new orthopedic products powered by CELLIANT infrared technology are the latest additions to the CURAD Performance Series collection and including different infrared supports designed for the ankle, knee, back, shoulder, as well as multipurpose use.

“This new CURAD Performance Series offering represents a major expansion of CELLIANT infrared (IR) bio-responsive textiles into the sports medicine field,” said Seth Casden, Hologenix Co-Founder and CEO. “We are honored to partner with Medline and look forward to future introductions.”

In addition to the inclusion of CELLIANT infrared technology, Medline has engineered the elastic supports to provide targeted compression for enhanced local circulation that helps reduce swelling, with a contoured fit that won’t slip or shift during normal activities with silicone grips that keep the product in place.

The removable hot/cold therapy supports provide adjustable compression and a gel compress that can be cooled or heated to further reduce swelling and discomfort.

Source:

Hologenix, LLC /  Sarah Fletcher Communication

08.11.2022

Ascend buys majority stake in recycler Circular Polymers

Ascend Performance Materials has purchased a majority stake in California-based Circular Polymers, a recycler of post-consumer, high-performance polymers including polyamide 6 and 66, polypropylene and polyester (PET). The deal provides Ascend with a consistent supply of high-quality PCR materials for its ReDefyne™ sustainable polyamides, launched at K 2022.

Circular Polymers, which as part of the deal is renamed Circular Polymers by Ascend, reclaims and processes post-consumer carpet via a unique technology and has redirected approximately 85 million pounds of waste from landfills into new goods since 2018.

“We are focused on helping our customers reach their sustainability goals and Circular Polymers by Ascend provides materials that offer strong performance with a considerably smaller environmental footprint, compared to other technologies like pyrolysis,” said Phil McDivitt, president and CEO of Ascend. “Since we launched ReDefyne, the demand for our circular products has been significant across all segments of our business, including automotive, consumer, electronics and high-performance fibers and textiles.”

Ascend Performance Materials has purchased a majority stake in California-based Circular Polymers, a recycler of post-consumer, high-performance polymers including polyamide 6 and 66, polypropylene and polyester (PET). The deal provides Ascend with a consistent supply of high-quality PCR materials for its ReDefyne™ sustainable polyamides, launched at K 2022.

Circular Polymers, which as part of the deal is renamed Circular Polymers by Ascend, reclaims and processes post-consumer carpet via a unique technology and has redirected approximately 85 million pounds of waste from landfills into new goods since 2018.

“We are focused on helping our customers reach their sustainability goals and Circular Polymers by Ascend provides materials that offer strong performance with a considerably smaller environmental footprint, compared to other technologies like pyrolysis,” said Phil McDivitt, president and CEO of Ascend. “Since we launched ReDefyne, the demand for our circular products has been significant across all segments of our business, including automotive, consumer, electronics and high-performance fibers and textiles.”

Ascend has a sustainability strategy based on three pillars: empowering people, innovating solutions and operating without compromise. Ascend has committed to reducing its greenhouse gas emissions by 80% by 2030 and recently announced two new efforts to reduce the carbon footprint of its products.

Source:

Ascend Performance Materials / EMG

(c) Global Fashion Agenda
04.11.2022

Highlights of the Global Fashion Summit Singapore Edition

Hosted outside of Copenhagen for the first time in its 13-year history, on 3 November, Global Fashion Summit assembled over 250 stakeholders representing manufacturers, garment workers, retailers, brands, suppliers, NGOs, policy, and innovators in Singapore and online to spur industry action. The Summit was presented by Global Fashion Agenda (GFA), the non-profit organisation that is accelerating the transition to a net positive fashion industry.
 
The latest edition of the Summit was centred around the theme ‘Alliances for a New Era’, building on dialogues from the June edition in Copenhagen and gathering leaders from across the entire value chain to elevate diverse voices and foster alliances within the fashion industry and beyond, to drive sustainable impact.
 

Hosted outside of Copenhagen for the first time in its 13-year history, on 3 November, Global Fashion Summit assembled over 250 stakeholders representing manufacturers, garment workers, retailers, brands, suppliers, NGOs, policy, and innovators in Singapore and online to spur industry action. The Summit was presented by Global Fashion Agenda (GFA), the non-profit organisation that is accelerating the transition to a net positive fashion industry.
 
The latest edition of the Summit was centred around the theme ‘Alliances for a New Era’, building on dialogues from the June edition in Copenhagen and gathering leaders from across the entire value chain to elevate diverse voices and foster alliances within the fashion industry and beyond, to drive sustainable impact.
 
The Summit’s first international edition facilitated more conversations with manufacturer and supply chain voices to discuss crucial challenges and opportunities around working collaboratively with brands on equal terms. The programme featured bold panels, case studies, masterclasses and leadership roundtables reflecting on topics including ‘Data Scarcity: A Crisis of Measurement?’, ‘Disruption for Better Wage Systems’, ’Community and Circularity’, ‘Connecting the EU Textiles Strategy with the Value Chain’ and ‘Our Energy Transformation Moment’.
 
Attendees heard from over 50 speakers including H.E. Sandra Jensen Landi, Ambassador of Denmark to Singapore & Ambassador-Designate of Denmark to Brunei; H.E. Iwona Piórko, Ambassador of the European Union to Singapore; Anne-Laure Descours, Chief Sourcing Officer, PUMA; Baptiste Le Gal, Chief Revenue Officer APAC, Vestiaire Collective; Christian James Smith, Head of Sustainability Stakeholder Engagement, Zalando; Ninh Trinh, Director of Responsible Sourcing & Sustainability, Target; Roger Lee, CEO, TAL Apparel; Wilson Teo, President, Singapore Fashion Council; Edwin Keh, Chief Executive Officer, The Hong Kong Research Institute of Textiles and Apparel, Ashila Dandeniya, Founder, StandUp Lanka; and more.

Key takeaways and highlights from the event include:

  • Global Fashion Agenda announced a new alliance with BBC Storyworks Commercial Productions to launch a film series on BBC.com, which is currently in the early stages of development. The new series will present human-centric stories focusing on both social and environmental sustainability in the fashion industry. It will be released to a wide audience in 2023.
  • Federica Marchionni outlined the crucial need for accurate and robust data to substantiate sustainability claims and credentials but acknowledged that the focus on finding ‘perfect’ data cannot be allowed to stifle progress. Global Fashion Agenda will build upon Summit discussions to reflect on how the industry can accurately measure and communicate sustainability performance and illuminate the data credibility challenges.
  • The session ‘Establishing circular fashion systems in Cambodia & Vietnam’ outlined the first steps taken by the Global Circular Fashion Forum to establish circular fashion systems in Vietnam and Cambodia with regional stakeholders, government, brand and manufacturer representation.
  • Throughout the Summit, the Innovation Forum connected fashion companies with sustainable solution providers. Exhibitors included Better Work , Circular Fashion Partnership, Compreli, Kno Global, Planatones by Noyon Lanka, Redress Design Award and The ID Factory.
  • Through conversations such as ‘Disruption for Better Wage Systems’ and ‘Empowering the Worker Majority’, there was a resounding message for people to consider the real people in the value chain. Ensuring dignified livelihoods for these workers should have the same sense of urgency as emissions reductions. 
Source:

Global Fashion Agenda

31.10.2022

DC International has selected Fresh Relevance for personalized online experiences

Fresh Relevance announces that DC International has selected its versatile personalization platform to power personalized online experiences for its Coverstore and Leatherology brands.

DC International is a vertically integrated eCommerce company and home to two fast-growing direct-to-consumer brands: Coverstore and Leatherology. By selecting Fresh Relevance to power personalization across the website and email marketing of Coverstore and Leatherology, DC International will be providing shoppers with a more engaging and tailored online experience. The business will take advantage of the rich feature set within the Fresh Relevance platform, including product recommendations.

“We’re delighted to welcome DC International to the Fresh Relevance family and are excited to help them provide their Coverstore and Leatherology customers with a more tailored and valuable experience online,” says Mike Austin, CEO & Co-founder at Fresh Relevance.

Fresh Relevance announces that DC International has selected its versatile personalization platform to power personalized online experiences for its Coverstore and Leatherology brands.

DC International is a vertically integrated eCommerce company and home to two fast-growing direct-to-consumer brands: Coverstore and Leatherology. By selecting Fresh Relevance to power personalization across the website and email marketing of Coverstore and Leatherology, DC International will be providing shoppers with a more engaging and tailored online experience. The business will take advantage of the rich feature set within the Fresh Relevance platform, including product recommendations.

“We’re delighted to welcome DC International to the Fresh Relevance family and are excited to help them provide their Coverstore and Leatherology customers with a more tailored and valuable experience online,” says Mike Austin, CEO & Co-founder at Fresh Relevance.

Source:

Fresh Relevance / CHIEF PR

(c) Zünd Systemtechnik AG
25.10.2022

Zünd: Heat Sealing Module – HSM receives composites industry award

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

During processing, dry fiber materials are prone to fraying along the edges. Using hot air, the HSM seals the fabric along the cut path in advance of the Zünd Power Rotary Tool – PRT cutting it. Because of this sealing process, the cut can then be performed at full speed, in any direction, and produces both higher-quality parts and greater production efficiencies.

The HSM helps create clean, sealed edges when cutting fiber-reinforced thermoplastic composites. It benefits not only the cutting process itself, but other production processes downstream. Cutting this way leaves behind no loose or uncut fibers and maintains a clean cutting surface and uncontaminated production environment. At the same time, it ensures that cut parts maintain their shape, and this increased stability makes them much easier to handle, especially in fully automated production workflows.

Source:

Zünd Systemtechnik AG

(c) Barry-Wehmiller
21.10.2022

Barry-Wehmiller: Bob Chapman named Tharseō CEO of the Year

During an awards ceremony on Monday, October 17, the Society for Human Resource Management (SHRM) Foundation awarded Barry-Wehmiller CEO Bob Chapman its preeminent recognition in people leadership, the Tharseō CEO of the Year Award.

SHRM is the world's largest HR professional society, representing more than 300,000 HR professionals across the globe, impacting 115 million workers and their families. The Tharseō (thar-seh'-ō)—derived from the Greek word for "courageous, confident and bold"—awards are given to those who demonstrate innovative and impactful business practices leading to better workplaces and a better world by serving as visionaries, innovators and change agents.

During an awards ceremony on Monday, October 17, the Society for Human Resource Management (SHRM) Foundation awarded Barry-Wehmiller CEO Bob Chapman its preeminent recognition in people leadership, the Tharseō CEO of the Year Award.

SHRM is the world's largest HR professional society, representing more than 300,000 HR professionals across the globe, impacting 115 million workers and their families. The Tharseō (thar-seh'-ō)—derived from the Greek word for "courageous, confident and bold"—awards are given to those who demonstrate innovative and impactful business practices leading to better workplaces and a better world by serving as visionaries, innovators and change agents.

Chapman has been the CEO of Barry-Wehmiller since 1975. Since then, he has applied a blend of strategy and culture to create a thriving global organization. Chapman’s work is chronicled in his 2015 Wall Street Journal bestseller Everybody Matters: The Extraordinary Power of Caring for Your People Like Family, co-authored by Raj Sisodia, founder of Conscious Capitalism. In 2016, Harvard Business School released a case study about Barry-Wehmiller’s approach to business that is now taught at 80 business schools. A non-profit, Chapman Foundation for Caring Communities, and a leadership consulting firm, Chapman & Co. Leadership Institute, bear Chapman’s name and share some of the foundational learnings that helped transform the culture of once-traditional Barry-Wehmiller into a caring, dignity-honoring, fulfilling place to work.

In recent years, Chapman has focused on creating caring leaders of tomorrow by sponsoring programs in K-12 schools and universities. In 2021, Chapman and his team partnered with Fordham University and other Jesuit business schools to launch the Humanistic Leadership Academy which helps professors and students become more human-centered.

A sought-after global speaker, Chapman recently addressed the United Nations PRME conference on transforming education, the China Organizational Evolution Forum, Brazil’s Virtuous Leadership Conference, Vizient CEO Network, and the Healthcare Burnout Symposium, to name a few.

Source:

Barry-Wehmiller

19.10.2022

Kornit Digital issues Second-Annual Impact Report

Kornit Digital Ltd. unveiled its Impact Report for 2021 highlighting progress made against goals and further expanding its commitment to a long-term strategy designed to transform the world of fashion and textiles into one that is more sustainable. The comprehensive analysis details Kornit’s performance related to climate action, waste management, green chemistry, and diversity in the workplace, as well as other areas of the Company’s Environmental, Social, and corporate Governance (ESG) framework.

Key Accomplishments Against Baseline (2021)  
Kornit’s ongoing dedication to improving ESG practices within its own operations has resulted in Company-wide achievements in the areas of:

Climate Action and Waste Management*

  • ~16% reduction in GHG emissions intensity from x 9.11-e to 7.68 MTCO2-e
  • 39% reduction in hazardous waste intensity from 1.7 tons to 1.04 tons
  • 57% reduction in non-hazardous waste intensity from 33 tons to 14 tons

Green Chemistry

Kornit Digital Ltd. unveiled its Impact Report for 2021 highlighting progress made against goals and further expanding its commitment to a long-term strategy designed to transform the world of fashion and textiles into one that is more sustainable. The comprehensive analysis details Kornit’s performance related to climate action, waste management, green chemistry, and diversity in the workplace, as well as other areas of the Company’s Environmental, Social, and corporate Governance (ESG) framework.

Key Accomplishments Against Baseline (2021)  
Kornit’s ongoing dedication to improving ESG practices within its own operations has resulted in Company-wide achievements in the areas of:

Climate Action and Waste Management*

  • ~16% reduction in GHG emissions intensity from x 9.11-e to 7.68 MTCO2-e
  • 39% reduction in hazardous waste intensity from 1.7 tons to 1.04 tons
  • 57% reduction in non-hazardous waste intensity from 33 tons to 14 tons

Green Chemistry

  • Complete elimination of Acute Toxic Amines (CLP category 1, 2, 3) CMR
  • 20% reduction of VOC level in Robusto Inkset and 30% of VOC in Eco Ink/Green

DEI and Community Engagement

  • An increase in women in management, from 30% to 35%
  • Reporting 88% of employees feeling respected and free to be authentic at work - *Intensity measures are per $1 million of revenue.

Kornit Digital’s Impact Strategy
Propelled by an ambition to make a positive impact across all areas of its business and throughout the fashion and textile industries, Kornit further adjusted its Impact Strategy this year towards more expansive, longer-term goals and objectives. Kornit’s refined strategy reflects the Company's dual role as a change agent in the industry—both as a leader empowering the fashion industry to be more sustainable, and as an accountable participant responsible for embracing social and environmental change to make the world a better place.  
The holistic strategy accounts for both roles, across two fundamental pillars—"Enable the Change” and “Be the Change”—and incorporates both social and environmental KPIs designed to meet the Company’s goals and respond to stakeholders’ input, as well as industry and ecosystem needs

Kornit is officially unveiling the report during a press event at PRINTING United Expo 2022.

*Intensity measures are per $1 million of revenue.

Source:

Kornit Digital