From the Sector

STAMFORD – German ultralight aircraft specialist Flight Design has chosen Hexcel as its key supplier adopting low-temperature curing prepreg into its aircraft production. Hexcel’s HexPly® M79 Carbon Fiber prepregs deliver a more consistent final product by ensuring constant material quality and processing parameters and produce a lighter and stronger aircraft at a more competitive overall cost.

Flight Design has always relied heavily on composites for its aircrafts’ ultralight construction and turned to long-term composite materials partner Lange + Ritter, part of Hexcel’s European distribution network, when they began searching for a prepreg material solution. Hexcel and Lange + Ritter created several new product codes specifically for Flight Design and then supplied materials for initial handling trials and prototyping. Hexcel’s HexPly M79 low temperature curing out of autoclave solution was first used in the new F2 prototype. As part of its material supply package, Lange + Ritter also sent a team for on-site training and technical support, allowing the Flight Design production team to get up to speed with prepreg as quickly as possible.

HexPly M79 prepregs can be cured at temperatures as low as 70˚C for eight hours or 80˚C for four hours, reducing tooling costs and increasing build rates. When combined with Hexcel’s innovative air venting Grid Technology, HexPly M79 UD carbon tapes can also be laminated with reduced debulking steps to produce void contents <1% irrespective of laminate thickness. With consistently low void contents and improved mechanical properties, designers and engineers are able to further optimize highly loaded composite aerostructures.

As more and more of its composite aircraft parts are transferred to prepreg technology, Flight Design is seeing the benefits of its switch to HexPly M79. Lay-up is cleaner and more precise, low temperature oven curing is quick and energy efficient, and the manufacturing process consistently outputs exceptionally high-quality laminates and components. The long-term strategy is to integrate HexPly M79 across the range, with Hexcel materials lightening the ultralight aircraft at Flight Design even further.

“The materials and technology package from Hexcel and Lange + Ritter has been a big success for us at Flight Design,” comments Daniel Gunther, Managing Director at Flight Design. “When we took the decision to switch to prepreg, we looked at many options but only Hexcel and Lange + Ritter could offer us low temperature out-of-autoclave (OOA) curing, globally respected material quality and the customer service levels we were searching for.”

Chomarat Group, expert in composite reinforcements for the marine market developed a high performing C-PLYTM reinforcement for the hull and deck of Arcona 435 and 465. Both cruiser-racer are a unique combination of comfort onboard and performances, for fast family cruising and high-level races thanks to their specific design, and the use of C-PLY™. The carbon NCF reinforcement allows structural design benefits, premium surface quality and overall parts cost saving.

“With 45 years of expertise, Chomarat is a pioneer in developing solutions to achieve weight reduction, improved surface appearance and stronger structure.

C-PLY™ makes it possible to meet these specifications, while ensuring stable quality and cost-effectiveness” explains Vincent Cholvy, Marine market Manager at Chomarat.

THE CUTTING-EDGE TECHNOLOGY FOR SERIAL PRODUCTION OF CARBON BOATS
A study was led to determine the optimal construction to develop a high performing C-PLY™ range for a better permeability in infusion process. The result is a carbon NCF that achieves high mechanical performances, multi resins compatibility and cost efficiency. “Chomarat is the best choice for supplying the product our factory prefers to work with: stable quality and cost effectiveness are the key benefits” explains Nicolas Broberg, Managing Director Arcona Yacht.

Infusion technology for hull and deck with up to 70% level of carbon in the laminate gives the greatest possible strength.

• 8^th edition to be held as the “Fair & Convention for Hightech Textiles” at the Carlowitz Congresscenter Chemnitz for the first time on 9 – 10 June 2020 – Textile themes from the LiMA exhibition for lightweight design are being integrated in the new format

 
The “mtex+” is raising its profile and is moving to an attractive setting. The 8^th edition of the international exhibition entitled “Fair & Convention for Hightech Textiles” will be held in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 and 10 June 2020.
 
“The “mtex+” is a trade event that experts from various sectors greatly appreciate on account of its emphasis on dialogue and in-depth contacts – and because everything is on the spot. The modern, exciting ambiance at the new venue facilitates our desire to create the best possible atmosphere for cooperation in a trusting environment,” Dr Ralf Schulze, Managing Director of C3 GmbH, the organising company, explains. “In its future form, the “mtex+” will act as a source of ideas and inspiration for developers and manufacturers as well as for users of all kinds of high-tech textiles, specifically including composites, to a greater degree than in the past. Textile composite materials are becoming increasingly important for many processors. That’s the reason why we’re transferring the textile themes of the LiMA lightweight design exhibition, which has been held alongside the “mtex+” in the past, into our new trade fair format. Lightweight textile design in all its facets will be one of the major emphases at the “mtex+”.”    
 
The major topics covered by the 8th “mtex+” will include process development, textile engineering, digitalised value-added chains, services with potential for use across different sectors as well as recycling. The highlights of the programme will include workshops on effective and sustainable production, smart textiles, acoustic textiles, a special exhibition on health and protective textiles as well as an entertaining network evening entitled “Excellent connections”.

The North-Eastern German Textile and Clothing Industry Association (vti) believes that this concept exactly matches the needs of its target audience. “Chemnitz is located at the heart of the Central German industrial and research region, which is developing with great dynamism,” says vti Managing Director, Dr.-Ing. Jenz Otto. “Any firm that presents its products and services here will find itself in a very interesting market. Located not far from the border with the Czech Republic and Poland, the “mtex+” will also act as a dialogue forum for potential cooperation partners across sector and international boundaries, both for these and other Eastern European countries.”
 
The “mtex+” will continue to be held in Central Germany’s industrial city of Chemnitz every two years in future too. 159 exhibitors from seven different countries (in conjunction with the LiMA lightweight design exhibition) attended the 7th edition in the spring of 2018. 22 percent of the approx. 1,000 trade visitors came from abroad.

• Unique, patented 3D printing process enables production of large-scale components
• First direct investment by BASF Venture Capital in a company in China

BASF Venture Capital GmbH is investing in Prismlab, a leading provider of 3D printing processes and 3D printers, headquartered in Shanghai, China. Prismlab has developed a patented printing process that is characterized by a very high printing speed, high level of precision and lower printing costs. BASF’s venture investment will enable Prismlab to further accelerate its product development and innovation while strengthening its market reach to the global market.

“This is our first direct investment in a Chinese company,” said Markus Solibieda, Managing Director of BASF Venture Capital GmbH. “The trailblazing technology from Prismlab allows large and stable components, such as medical braces and anatomical models, to be 3D printed for the first time. This investment supports BASF’s strategy of actively advancing our technologies and expanding our product offering in the 3D printing sector.”

“China is transforming from a manufacturing-driven to an innovation-driven economy. This investment in Prismlab reflects our commitment to further expanding our innovation capabilities in China, and BASF Venture Capital plays an important role in helping us identifying potential partners that lead us to success,” said Dr. Zheng Daqing, BASF’s Senior Vice President, Business and Market Development Greater China.

“The 3D printing technology must continue to evolve before it is set to change the world. At Prismlab, we aim to spearhead and accelerate that change by providing solutions through specialized customization. The investment allows us to stay laser-focused on our R&D capability, a key factor to achieve that goal,” said Mr. Hou Feng, Founder and Chairman of Prismlab.

Prismlab has developed a patented 3D printing process, “Pixel Resolution Enhanced Technology”, based on stereolithography (SLA). SLA allows comparatively large components to be produced using light-curing resins. Prismlab’s technology increases the printing resolution without compromising printing speed. In order to increase the amount of energy brought into a pixel, Prismlab’s technology divides each pixel in the resin into several small sections, which can be cured individually by exposure to LCD light. This makes the energy input into each pixel significantly higher than similar processes that expose each pixel to light once. This allows comparatively large and stable components or numerous parts to be printed in the same production step. With the use of LCD light, it also reduces process costs. This advantage opens opportunities in the footwear and furniture industry.

Along with this patented process, Prismlab also markets 3D printers and other related services. The Prismlab technology can be used in various key customer applications, including invisible braces, and anatomical models for medical, and education and training purposes.

SLA uses a laser for layer-by-layer curing of a photopolymer solution to shape the required workpiece. SLA and LCD based printing processes determinate the size, stability, and usability of the components to be produced as they are limited by the size of the light spot and the intensity of the light.

• Successful acquisition of Austrian plastics recycling company Ecoplast Kunststoffrecycling GmbH

Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces today that it has fully acquired the Austrian plastics recycler Ecoplast Kunststoffrecycling GmbH (“Ecoplast”). Based in Wildon, Austria, Ecoplast processes around 35,000 tonnes of post-consumer plastic waste from households and industrial consumers every year, turning them into high-quality LDPE and HDPE recyclates, primarily but not exclusively for the plastic film market.

The expectation of Borealis is that the recycled PO market will grow substantially by 2021, which is the strategic rationale behind the acquisition. The company has made PO recycling a key element of its overall PO strategy because of its potential to support both growth and sustainability. Borealis has been an industry frontrunner in making polyolefins more circular. In 2014, it began offering high-end compound solutions to the automotive industry, consisting of 25% and 50% post-consumer recycled content. Borealis was also the first virgin PO producer to explore the possibilities of mechanical recycling, by acquiring one of Europe's largest producers of post-consumer polyolefin recyclates - mtm plastics GmbH and mtm compact GmbH – in July 2016. Since then it has continued to invest into the development of technology and new products in the area of circular polyolefins.

“Borealis recognises the increasing need for plastic recycling and sees the Circular Economy as a business opportunity. Borealis already has a long-term collaboration with Ecoplast and this acquisition is the next logical step in building our mechanical recycling capabilities. As an important complement to mtm in Germany, Ecoplast will help us address critical sustainability challenges and become a polyolefin recycling leader. Eventually, we want to use our experience to develop an effective blueprint for the end-of-use phases for plastics that can be applied in other parts of the world,” says Borealis Chief Executive Alfred Stern.

“We are very happy that the transaction with a strong and reliable partner such as Borealis has been successfully concluded and are looking forward to our common future activities on the recycling market. We have located potential synergies in many operative and strategic areas, especially in product quality R&D and future applications of polyethylene-film-recyclates. The combination of Ecoplast and Borealis holds the potential to be groundbreaking for the market,” says Ecoplast’s Managing Director Lukas Intemann.

EUROBIKE, the world’s leading trade fair for the cycling industry, will include ROICA™ smart innovations into the race. Cycle retailers, brands and manufacturers will discover ROICA™ premium stretch that provides comfort and movement as it energizes.

ROICA™ will go the distance as they join this year’s EUROBIKE Academy line-up and host an interactive panel focused on sustainability as an added value for the cycling market. Whether an expert or newcomer, the must attend panel titled; What is Smart Innovation in the Biking Market? will be held on Monday, July 9th from 12:00-12:45 in Conference Center East, Room London. Moderated by Giusy Bettoni, CEO, C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy), a Milan based company generating global strategies and identifying new values essential for today’s knowledgeable conscious consumer. The panel will lead the way, as they share their expertise and discuss what they are doing to push the boundaries of innovation. They will highlight responsible dimensions and processes currently available. The all-star lineup includes:

Uwe Schmidt, Asahi Kasei’s ROICA™, Managing Director introduces cycle enthusiasts, brands, retailers and manufacturers to the world’s first premium sustainable stretch yarn: ROICA™ Eco-Smart and the ROICA™ Feel Good family dedicated to well-being.
 
Laura Gambarini, marketing and communication manager at M.I.T.I. S.p.A.: M.I.T.I. Since 1931, M.I.T.I. develops and creates premium and innovative stretch warp knitted fabrics for all the high performance sports. Cycling brands recognize M.I.T.I. as the market leader for the outstanding features of their innovative fabrics. Green soul is their ultimate creation, the first fully sustainable stretch warp knitted range of fabrics in the world, created with ROICA™ Eco-Smart family for the new generation sustainable performance garments.
 
Sven Koehler, Head of production Maloja Clothing GmbH: Maloja, an outdoor specialty brand with its roots in nature and wellbeing have developed new amazing biking sets constructed of M.I.T.I. SpA fabrics using certified yarns belonging to ROICA™ Eco-Smart family.
 
Sergio Alibrandi, Executive Marketing Director Sitip S.p.A.: SITIP creates high-tech innovative sports fabrics that are made in Italy and optimize the latest technology. Committed to smart innovation, learn how they developed their ground-breaking multi-panel thermal bib tights able to generate heat for riders that want to conquer cold winter training. Made from BeHOT fabric constructed with ROICA™ StretchEnergy™, the next level of well-being providing a new dimension to active performance.  The audience will learn how leading international cycling brand Santini is using BeHOT with ROICA™ on select products to generate additional heat – up to 2 degrees C as the cyclist moves their body, thanks to ground-breaking heat generating technology as certified by CeRism, Outdoor Sport Research Centre at Verona University.
 
Spearheading the premium stretch market, ROICA™ partners’ materials elevate new standards for high-tech performance that can enhance cycling products to compete responsibly. ROICA™ partners excite you as they show a fantastic range of stretch essentials for cycling clothing, gear, and apparel that offer solid performance perks. Most importantly, visit ROICA™ partners at EUROBIKE to learn about their ongoing commitment to responsible innovation and creativity.

Lectra brings together partnership schools and industry experts to discuss how changing professions
in fashion are impacting training programs

Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather,
technical textiles and composite materials, recently welcomed partners from the world of
education to the company’s Bordeaux-Cestas campus for its eighth education congress. The
event was dedicated to the mega trends shaping the fashion industry and impacting
professions from design to production.

Over fifty representatives from among the most important fashion schools in Germany, Canada, China,
USA, France, Hong Kong, Italy, The Netherlands, Poland, United Kingdom, Switzerland and Sweden, participated
in this biannual meeting between industry experts and teaching professionals.

Fashion professions are evolving as companies make their first steps towards Industry 4.0, adopting 3D
and rationalizing the lifecycle management for their collections thanks to PLM. Lectra’s congress enabled
schools to discuss the developing role of designers and patternmakers, and the new elements to be
integrated into training programs.

Lectra illustrated future changes through presentations on design, patternmaking, 3D prototyping, and PLM.
“It is fundamental to bring innovation experts in the industry together with fashion schools, because
students will drive the evolution of this industry,” stated Pascal Denizart, Managing Director of the Centre
européen des textiles innovants (CETI).

Working with schools to design courses which meet the needs of fashion companies has always been at
the heart of Lectra’s education program. During the event, the company presented collaborative
experiences between partner schools and fashion brands, such as the competitions organised by Lectra
with Missoni, Balenciaga, and Armani in Italy, as well as Peacebird in China and JC Penney in the United
States.

In the United Kingdom, Lectra collaborated with COS (H&M group) and the Arts University Bournemouth
(AUB) for a competition centred on the design of a collection with zero waste.
“The process was totally digital, from design to the creation of a virtual prototype in 3D. Our students learnt
to optimize each stage of the process. By leveraging the use of Kaledo®, Modaris® and Diamino®, the
collaborative work between AUB, COS and Lectra is exactly the type of project that enormously motivates
our students. Live briefs developed with leading fashion brands and Lectra offer excellent opportunities
which directly inform industry currency and student employability,” explained Penny Norman, a lecturer at
AUB.

The event also shone the spotlight on China and its major role in the evolution of the fashion industry.
Li Min, Vice-Dean of the fashion and design faculty at Donghua university in Shanghai spoke of the event,
organized by Lectra, which brought together major Chinese companies, experts, and representatives from
the biggest schools in China.

“Exchanges on the impact of the Made in China 2025 plan on the fashion industry can better prepare
students for tomorrow’s professions, where digital and automation will occupy a far more central position
than today,” testified Li Min.

"The fashion industry is evolving so fast that sharing insights and best practices with experts and other
fashion schools has become vital to ensure we offer the best learning experience and technology tools to
our students", said Dr. Trevor J. Little, Professor of Textile and Apparel, Technology and Management in
the College of Textiles at NC State University.

“Lectra’s eighth education congress confirms the company’s commitment to our partner schools. We
shared our analysis of the market, the digitalization of the eco-system, and how Industry 4.0 principles can
be applied to the fashion industry. We also discussed mass customization and the role of PLM. While these
are key subjects for our customers, many schools are only now approaching them. We are preparing
tomorrow, today: Lectra is supporting our customers, and schools to play an essential role,” concludes
Céline Choussy Bedouet, Chief Marketing and Communications Officer, Lectra.