From the Sector

all
Corona
Sustainable
Textile Business
Textile Machinery
Fibres, Yarns & Nonwovens
Technical Textiles
Interior Textiles
Clothing
Companies
Fairs
Trade
Associations
People
Archive
Reset
908 results
CHOMARAT extends its C-TAPE™ line with a new carbon tape (c) Gilles Martin-Raget - Beneteau
26.04.2018

CHOMARAT extends its C-TAPE™ line with a new carbon tape

CHOMARAT, the composite reinforcement specialist, has developed a new unidirectional woven tape for its C-TAPETM line of products. Designed to meet the standards of industrial production, the new C-TAPE™ is reinforcing the foils of the “Figaro Beneteau 3”. These appendages improve the monohull’s stability and performance.

“For the series production of the foils, the Beneteau Group chose MULTIPLAST, the well-known builder of racing boats, which engaged the CHOMARAT Group to provide project support and achieve the best cost/performance balance,” explains Vincent CHOLVY, CHOMARAT’s Manager for the boating market.

C-TAPE™, a high-performance carbon reinforcement with great design flexibility
C-TAPETM offers a lot of flexibility in terms of weight, width and construction. It has been optimized to facilitate series production, yet provide the foils with maximum performance.
The weft yarn developed by CHOMARAT makes the tape easy to handle and to work with. It is produced in 50-cm widths in order to adapt better to the mould, thus reducing both scrap and production cost.

CHOMARAT, the composite reinforcement specialist, has developed a new unidirectional woven tape for its C-TAPETM line of products. Designed to meet the standards of industrial production, the new C-TAPE™ is reinforcing the foils of the “Figaro Beneteau 3”. These appendages improve the monohull’s stability and performance.

“For the series production of the foils, the Beneteau Group chose MULTIPLAST, the well-known builder of racing boats, which engaged the CHOMARAT Group to provide project support and achieve the best cost/performance balance,” explains Vincent CHOLVY, CHOMARAT’s Manager for the boating market.

C-TAPE™, a high-performance carbon reinforcement with great design flexibility
C-TAPETM offers a lot of flexibility in terms of weight, width and construction. It has been optimized to facilitate series production, yet provide the foils with maximum performance.
The weft yarn developed by CHOMARAT makes the tape easy to handle and to work with. It is produced in 50-cm widths in order to adapt better to the mould, thus reducing both scrap and production cost.

“The project was an ambitious one,” says MULTIPLAST General Manager Yann PENFORNIS. “We had to reach a lower target cost, achieve a perfect foil shape, guarantee identical weight for all parts, and produce a set of foils per week over a period of one year.”

A reinforcement that facilitates flow in multi-ply carbon structures
Fifty plies of tape are used to make the foil so that it can resist high levels of stress and achieve optimal performance.
The specific structure of C-TAPETM facilitates resin flow throughout the thickness. The reinforcement provides the desired mechanical performance and also cuts down on production time.
The result is an ultra-innovative foil, both for its geometry and for the fabrication process (infu-jection) used.

“This new C-TAPE™ is the fruit of close co-operation between the MULTIPLAST and CHOMARAT development teams, and it rounds out our broad range of tapes. We are working on different fibres and adapting the widths to our customers’ processes in order to reduce costs,” concludes Vincent CHOLVY.

By the end of summer 2018, some one hundred foils will have been produced for assembly on the first 50 “Figaro Beneteau 3” monohulls.

CHOMARAT extends its C-TAPE™ line with a new carbon tape (c) Chromarat
More information:
CHOMARAT C-TAPE™
Source:

Agence APOCOPE

print close
more
16.04.2018

Archroma and Montega Italy join hands to help enhance the standards of Pakistan’s garment industry

Archroma, a global leader in color and specialty chemicals, and Montega S.r.l., Italy, (Montega) announce a collaboration aimed at supporting the fast-growing garment and apparel industry in Pakistan, particularly in the denim segment. The joint efforts will focus on fostering excellence in the finishing of textile garments.

Montega has decades of rich experience in developing the latest fashion trends with its high standard chemical treatments. For garments and fabrics, they offer solutions in finishing effects, enzymatic products, bio-polishing, bio-finishing and specialty products for indigo dyes, proteinaceous fibers such as wool and silk, and garment washing and/ laundry. All applications are geared toward environmental sustainability.

Archroma offers a wide range of brand and textile specialty chemicals that caters to the local industry in Pakistan for both its internal and export markets. The company’s expert team provides innovative solutions to its customers, tailored to their individual requirements.

Archroma, a global leader in color and specialty chemicals, and Montega S.r.l., Italy, (Montega) announce a collaboration aimed at supporting the fast-growing garment and apparel industry in Pakistan, particularly in the denim segment. The joint efforts will focus on fostering excellence in the finishing of textile garments.

Montega has decades of rich experience in developing the latest fashion trends with its high standard chemical treatments. For garments and fabrics, they offer solutions in finishing effects, enzymatic products, bio-polishing, bio-finishing and specialty products for indigo dyes, proteinaceous fibers such as wool and silk, and garment washing and/ laundry. All applications are geared toward environmental sustainability.

Archroma offers a wide range of brand and textile specialty chemicals that caters to the local industry in Pakistan for both its internal and export markets. The company’s expert team provides innovative solutions to its customers, tailored to their individual requirements.

Archroma will now represent Montega in marketing their products in Pakistan. The collaboration between the two firms will provide a unique synergy of combined expertise, reliability and commitment to environmental sustainability, especially toward the reduction of water usage and the emission of greenhouse gases during textile finishing processes. The design studio at the Archroma Center of Excellence in Pakistan will work extensively with Montega’s M-Lab Garment University in Riccione, Italy, to deliver solutions based on the latest trends and fashion effects, backed by world-class technical support.

Mujtaba Rahim, CEO of Archroma Pakistan, comments: “We, at Archroma, believe in continuous improvement and challenging the status quo to make our industry sustainable. We have dedicated ourselves to bringing innovation in our product lines and to closely partnering with like-minded organizations to build industrial rapport. Through this initiative of joining hands with Montega, we will be able to share latest R&D developments with the textile industry in Pakistan, and help grow Pakistan’s contribution in the global textile arena.”

More information:
apparel industry Archroma textile specialty chemicals Pakistan
Source:

EMG PR

print close
more
03.04.2018

Archroma at China Interdye 2018

  • Visit Archroma at China Interdye 2018, Booth A100, April 11-13, 2018, at the ShanghaiWorld Expo Exhibition & Convention Center, Shanghai, China

Archroma, a global leader in color and specialty chemicals, will present at China Interdye 2018 its latest technologies, under the motto: “Enhanced solutions for color and performance, it's our nature”.
With a heritage of more than 130 years, Archroma provides solutions that combine performance, safety and low impact on resources. The company can draw on its extensive formulation and technical know-how to offer a constant flow of eco-advanced and innovative new in dyestuff and pigments, as well as process and functional chemicals.
Solution packages for innovation

Visitors at Archroma’s Booth A100. will be able to ‘experience’ Archroma's innovative solutions, in particular:

  • Visit Archroma at China Interdye 2018, Booth A100, April 11-13, 2018, at the ShanghaiWorld Expo Exhibition & Convention Center, Shanghai, China

Archroma, a global leader in color and specialty chemicals, will present at China Interdye 2018 its latest technologies, under the motto: “Enhanced solutions for color and performance, it's our nature”.
With a heritage of more than 130 years, Archroma provides solutions that combine performance, safety and low impact on resources. The company can draw on its extensive formulation and technical know-how to offer a constant flow of eco-advanced and innovative new in dyestuff and pigments, as well as process and functional chemicals.
Solution packages for innovation

Visitors at Archroma’s Booth A100. will be able to ‘experience’ Archroma's innovative solutions, in particular:

  • EarthColors, traceable from nature to fashion
    The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
    The EarthColors have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.
     
  • Color Atlas, a game-changing system for fashion design
    The Color Atlas by Archroma® is a groundbreaking platform specially devised to address the needs of designers, brands, retailers, and manufacturers, enhancing creative possibilities for the industry as well as manageability and time to market through key complementary tools: The six-volume ‘Color Atlas Library’ with 4,320 color swatches and cotton poplin samples, the ‘Color Atlas Compact’ in two volumes for increased portability, and the ‘Color Atlas Online’ allowing to capture an inspiring image using a smartphone and immediately identify the closest Color Atlas shade palette, with the possibility to purchase a color sample instantly.
     
  • ‘Zero add-on’ formaldehyde finishing and coloring solutions
    Since January 1, 2016, formaldehyde is classified by ECHA5 as “may cause cancer” (Carc. 1B). Archroma offers a unique proposition combining: Fixapret® Resin WFF, a “zero add-on” formaldehyde anti-wrinkle finishing system and Helizarin® EcoSafe a “zero add-on”4 formaldehyde printing system. With Fixapret® Resin WFF, and Helizarin® EcoSafe, consumers can enjoy end-products that look good, whilst saving on precious resources and being gentler on the skin.
     
  • Sanitized® Odoractiv 10, active odor control function for polyester textiles
    Visitors at the booth will be able to experience a new unique dimension of odor control function for functional polyester textiles. The newly developed wash-resistant Sanitized® Odoractiv 10 has a dual-action effect: on the one hand it prevents the bacteria from docking on the textile, and on the other, it adsorbs odors whilst the garment is being worn.

Spotlight on automotive solutions
Having acquired a 75% stake in the M. Dohmen group, a specialist in textile dyes and chemicals for automotive, carpet and apparel, Archroma is now in the position to extend its offer in expert products and services. M. Dohmen will be present at the show at Booth A118.

Solution packages for sustainability
Brand owners and retailers around the world are taking action to evaluate the environmental impact of textile treatment, dyeing and finishing processes in response to consumer concerns.
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.

More information:
Archroma
Source:

EMG PR

print close
more
Lectra white paper: Digitalization Of The Automotive Cutting Value Chain (c) Lectra
article as PDF
03.04.2018

Lectra white paper: Digitalization Of The Automotive Cutting Value Chain

The automotive market is undergoing a period of great change. Global demand for light vehicles is increasing, but at slower rates than seen in previous years, and this is resulting in ever greater competition between carmakers. At the same time, the technological capabilities that can be offered are advancing rapidly. Areas such as autonomous driving, connectivity, interior comfort and the customization of vehicles in line with personal taste are becoming key ways that manufacturers can differentiate themselves and win market share. Indeed, automotive supplier Lear, recently unveiled a new biometric ‘smart’ seat, that tracks a driver’s health indicators.

The automotive market is undergoing a period of great change. Global demand for light vehicles is increasing, but at slower rates than seen in previous years, and this is resulting in ever greater competition between carmakers. At the same time, the technological capabilities that can be offered are advancing rapidly. Areas such as autonomous driving, connectivity, interior comfort and the customization of vehicles in line with personal taste are becoming key ways that manufacturers can differentiate themselves and win market share. Indeed, automotive supplier Lear, recently unveiled a new biometric ‘smart’ seat, that tracks a driver’s health indicators.

These trends are having a knock-on effect for suppliers. For original equipment manufacturers (OEMs), being able to satisfy diverse consumer preferences is now considered more of a success factor than getting a vehicle to production faster than the competition. Across the automotive supply chain — and especially for those involved in the production of car seats and interiors — a growing emphasis on interior styling and luxury components has created new challenges that are further compounded by increasing cost pressures.

Although news coverage about the automotive industry tends to focus on such innovations as ‘driverless’ cars and ‘intelligent’ vehicles, one of the most farreaching changes occurring is this trend towards personalization: how automotive manufacturers are managing to make mass-produced items unique. Not only are manufacturers increasing the number of models they are offering but also the options available to a consumer per model. The Vauxhall Adam is a case in point: consumers can have more than 1 million different combinations when they order the car.

To cope with these challenges, suppliers will need to re-evaluate and improve their production processes. Within this context, the integration of smart solutions and services, and the replacement of production tools that are incompatible with connected factory concepts, will be vital. The combination of Software as a Service (SaaS) with the cloud is already opening up new horizons for innovation. Factories remain at the heart of the value chain. But Industry 4.0 is revolutionizing mass production, allowing more and more large-scale, personalized — and profitable — manufacturing, with greater quality and no added costs or delays.

As customer expectations reach new levels, it is especially important that suppliers in the automotive cutting value chain ramp up their transformation, adopting the technologies and services shaping Industry 4.0. For years, OEMs and suppliers alike have used foam and frames to develop patterns for producing seat covers in material or leather. The automotive industry was among the first to use sophisticated 3D computer-aided design (CAD) programs for the design and development of vehicles. But it has taken time for this technology to be used extensively for seat covers. Although 80% of fabric seating and interiors are currently cut digitally, only 10% of leather seats are cut using this method. The majority of suppliers of automotive leather seating still rely heavily on manual cutting equipment, such as die and roller presses.

To gain the agility and flexibility to remain relevant and competitive in a market that is dictating more change, variants, and faster reaction times, close cooperation between OEMs and suppliers is necessary. For if even one aspect of the process fails to provide sufficient flexibility, speed to market and consistent quality, then the entire chain will be impacted.

In such a complicated and fast-moving market, only the most adaptable and innovative companies will succeed. The solutions that form part of the Industry 4.0 framework will help give suppliers the capacity to adapt and thrive in this new environment. For more Information please find the complete White Paper attached.

More information:
Digitale Zukunft, Lectra Automotive Lectra, PLM
Source:

Lectra

print close
more
An Evening of Smart Innovation that Showcased New Standards for Fashion (c) Rodin Banica
Textile installation by Cécile Feilchenfeldt
29.03.2018

An Evening of Smart Innovation that Showcased New Standards for Fashion

On Thursday, March 22nd, C.L.A.S.S., with support from the Council of Fashion  Designers  of  America  (CFDA),  hosted  an  intimate  gathering  of  fashion’s  industry  leaders, educators, designers and members of the press to celebrate An Evening of Smart Innovation.

The event was beautifully orchestrated by Ginger Design, an exceptional team of Italian creatives, filmmakers, food and  textile  designers  as  a  way  to  create  a  unique  immersive  experience  telling  the  story  of  C.L.A.S.S.’ visionary journey. Thus, providing guests with an awareness and chance to embrace knowledge related to four key areas that set new standards for fashion vital to C.L.A.S.S.’ business philosophy:  Heritage, Smart Innovation, Circular Economy and Design Responsibility.

Imagination and responsibility at the forefront of the event, guests entered to view a film by Cristina Picchi that  represented harmony  between the various  phases  of  the  textile  process  and  the  cycles  of  natural elements.

On Thursday, March 22nd, C.L.A.S.S., with support from the Council of Fashion  Designers  of  America  (CFDA),  hosted  an  intimate  gathering  of  fashion’s  industry  leaders, educators, designers and members of the press to celebrate An Evening of Smart Innovation.

The event was beautifully orchestrated by Ginger Design, an exceptional team of Italian creatives, filmmakers, food and  textile  designers  as  a  way  to  create  a  unique  immersive  experience  telling  the  story  of  C.L.A.S.S.’ visionary journey. Thus, providing guests with an awareness and chance to embrace knowledge related to four key areas that set new standards for fashion vital to C.L.A.S.S.’ business philosophy:  Heritage, Smart Innovation, Circular Economy and Design Responsibility.

Imagination and responsibility at the forefront of the event, guests entered to view a film by Cristina Picchi that  represented harmony  between the various  phases  of  the  textile  process  and  the  cycles  of  natural elements.

The piece de resistance was a three-dimensional installation designed by Cécile Feilchenfeldt that  contained  exquisite  knits  allowing  guests  to  walk  through  the area to  inspire creativity and explore the  limitless possibilities using innovative  smart  materials.  So,  with  responsible  design  in  mind  the guests  were  able  to  touch  and  feel  the  luxurious  smart  textiles supported  by  sustainable  credentials  from  Bacx  by  Centro  Seta, Bemberg™ by Asahi Kasei, ECOTEC® by Marchi & Fildi, Organic Cotton  Colours,  Re.VerSo™,  ROICA™  by  Asahi  Kasei,  TINTEX Textiles, and Zignone. The new generation of beautiful cottons, rich silks, lush wools and opulent cashmeres showcased throughout the C.L.A.S.S. event currently available to the market.

Giusy Bettoni and the C.L.A.S.S. team from Milan and New  York, as well as several of their partner representatives from around the globe  were  on  hand  to  engage  designers  and  educators  and answer   questions   related   to   smart   materials   and   processes. Designers  and  educators  were  pleased  to  learn  about  the  new C.L.A.S.S. e-commerce site dedicated to emerging designers and fashion  startups,  as  well as  new  details  regarding  C.L.A.S.S. Education  as  a  university   learning  resource,  co-founded   with James  Mendolia,  FIT  Professor,  MFA  Fashion  Design  and  FIT Sustainability Council Member.

Attendees included: Julien Labat, president of Edun and Marilyn Balkaransingh Director of  Fabric  R&D of  Edun, J.R.  Campbell  and  Young  Kim  Thanos of Kent State’s School of Design and Merchandising, Lisa Smilor and Stephanie  Soto of  CFDA,  Nomi  Dale  Kleinman of  FIT,  Susan Easton, founder   of   From   the   Road,   Nicole   Fischelis,   Heron Preston, Luciana Scrutchen of Parsons School of Design and Kay Unger, chair of the Board of Governors for Parsons, among others.
 

An Evening of Smart Innovation that Showcased New Standards for Fashion (c) Rodin Banica An Evening of Smart Innovation that Showcased New Standards for Fashion (c) Rodin Banica An Evening of Smart Innovation that Showcased New Standards for Fashion (c) Rodin Banica An Evening of Smart Innovation that Showcased New Standards for Fashion (c) Rodin Banica An Evening of Smart Innovation that Showcased New Standards for Fashion (c) Rodin Banica
More information:
Fashion, Start ups, Entrepreneurs CLASS Creativity Lifestyle and Sustainable Synergy Innovation
Source:

C.L.A.S.S.

Dawn Brown
Deborah Hughes, Inc.

print close
more
Color Analysis – The Color Trend Magazine for Autumn/Winter 2019 (c) DyStar Singapore Pte Ltd
27.03.2018

CSI launches Color Analysis – The Color Trend Magazine for Autumn/Winter 2019

Color Solutions International, a member of the DyStar® Group, is launching their Color Analysis magazine for Autumn/Winter 2019. This trend forecasting magazine provides high-level global color information for color managers, directors and designers to support the color palette development process. The magazine includes a seasonal color palette selected from a wide range of approximately 3,700 CSI ColorWall™ colors.

Based on most recent customer feedback, the newest edition of Color Analysis was adjusted to be more valuable for the design and palette creation process. This new edition contains 54 trend and validated colors, additional color data, and color evolution & direction by hue. Furthermore, the color trend palettes are displayed by product category: Women’s, Active, Intimates, Men’s, Kids and Home. Similar to the previous editions, Color Analysis also includes our proprietary Relative Color Popularity report (RCP), offering color predictions with validation of performing colors.

Color Solutions International, a member of the DyStar® Group, is launching their Color Analysis magazine for Autumn/Winter 2019. This trend forecasting magazine provides high-level global color information for color managers, directors and designers to support the color palette development process. The magazine includes a seasonal color palette selected from a wide range of approximately 3,700 CSI ColorWall™ colors.

Based on most recent customer feedback, the newest edition of Color Analysis was adjusted to be more valuable for the design and palette creation process. This new edition contains 54 trend and validated colors, additional color data, and color evolution & direction by hue. Furthermore, the color trend palettes are displayed by product category: Women’s, Active, Intimates, Men’s, Kids and Home. Similar to the previous editions, Color Analysis also includes our proprietary Relative Color Popularity report (RCP), offering color predictions with validation of performing colors.

“As the Color and Trend Director at Color Solutions, it is my goal to provide relevant seasonal color data collected through consumer insights and market analysis. We are able to look further out for trends that are affected by world views, mindset and cultural influences,” said Heather Sandwall, CSI Color and Trend Director

The CSI and DyStar team of experts work together and assist their customers in color development and communication as well as in the dyeing and quality inspection process to achieve best possible results and sustainable fashion. All CSI products are produced with high-quality, eco-friendly DyStar colorants.

Color Analysis – The Color Trend Magazine for Autumn/Winter 2019 (c) DyStar Singapore Pte Ltd
More information:
dyes and specialty chemicals DyStar CSI, DyStar, Spring/ Summer 2019
Source:

DyStar Singapore Pte Ltd

print close
more
Ternua Group chooses Lectra Fashion PLM 4.0 (c) Tenua Group
21.03.2018

Ternua Group chooses Lectra Fashion PLM 4.0

  • Spanish outdoor and sportswear market leader expands international presence thanks to Lectra’s latest product lifecycle management solution

Ismaning/Paris – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce that the Ternua Group, a world-renowned Spanish outdoor clothing and sportswear group, has chosen Lectra Fashion PLM 4.0 to increase their geographical presence by improving global teamwork.

Founded in 1994, the Ternua Group has achieved worldwide success by promoting adventure through respect for nature, producing sustainable technical clothing for outdoor sports enthusiasts worldwide. The group’s strong commitment to the environment is shown through their R&D that focuses on developing their own fabric by using eco-friendly materials such as organic cotton and recycled down.

Today, the group’s portfolio includes three brands Ternua, Astore and Lorpen, currently exporting to more than 50 countries, with operations in Europe, America and Asia. Compounding this global success, the ambitious group plans to penetrate more markets across the globe.

  • Spanish outdoor and sportswear market leader expands international presence thanks to Lectra’s latest product lifecycle management solution

Ismaning/Paris – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce that the Ternua Group, a world-renowned Spanish outdoor clothing and sportswear group, has chosen Lectra Fashion PLM 4.0 to increase their geographical presence by improving global teamwork.

Founded in 1994, the Ternua Group has achieved worldwide success by promoting adventure through respect for nature, producing sustainable technical clothing for outdoor sports enthusiasts worldwide. The group’s strong commitment to the environment is shown through their R&D that focuses on developing their own fabric by using eco-friendly materials such as organic cotton and recycled down.

Today, the group’s portfolio includes three brands Ternua, Astore and Lorpen, currently exporting to more than 50 countries, with operations in Europe, America and Asia. Compounding this global success, the ambitious group plans to penetrate more markets across the globe.

The group is implementing Lectra Fashion PLM 4.0 into their entire production process. Specifically developed to help fashion companies navigate the digital era, this modular and user-friendly solution will help the Ternua Group centralize and store information coming from their brands by digitalizing their supply chain. This will connect all teams involved in the design-to-production process, regardless of geographic location. Team members will also be able to comm unicate better with external suppliers, access accurate information and keep track of every collection’s development progress. The group can hence speed up the entire production process and help their brands deliver their collections to markets all over the world on time.

“We manage our design and product development processes in-house but outsource our production in Europe, north of Africa and Asia. For our business to expand globally, we need to go fully digital. By having a system that consolidates and standardizes data coming from all supply chain actors across the world, we can respond faster to consumer demand,” explains Aitor Barinaga, Chief Operations Officer, Ternua Group. “We have assessed all other vendors—and Lectra Fashion PLM 4.0 is clearly the winner. It has the ability to fully integrate all processes and improve communication and teamwork across all departments through sound data management. We are more than happy to have a trusted partner as Lectra for such an ambitious project.”

“Ternua Group is constantly pushing the boundaries of innovation. This is shown through their desire to help customers achieve their personal best by providing them with high-performance technical wear that is also environmentally friendly. We are thrilled to embark on this new journey with the Ternua Group, and we are confident that our solution and expertise will help them get their collections out to new markets on time,” says Rodrigo Siza, Managing Director, Spain and Portugal, Lectra.

More information:
Ternua Group Lectra, PLM Nachhaltigkeit
Source:

Lectra

print close
more
(c) Lectra
20.03.2018

Teamwork Reimagined: Lectra Connected Design and Lectra Connected Development

  • Connect people, data and processes with Lectra’s latest solutions to power up design and development teams

Paris – Lectra, the technological partner for companies using fabrics and leather, introduces collaborative solutions specifically developed for design and product development teams, enabling fashion companies to affront tighter deadlines and handle wider product mixes with speed and serenity.

With the rise of e-commerce, digitally dependent consumers expect personalized, innovative fashion delivered to their doorstep at the click of a mouse.

Fashion companies are struggling to keep up with consumer demands and looking for new ways to speed up design and development without compromising quality. Design teams work faster than ever to deliver fresh, eye-catching collections. Product development teams rush to transform new designs into consumer-ready products. Given the accelerated pace of the fashion marketplace, information sharing has become vital for these teams.

  • Connect people, data and processes with Lectra’s latest solutions to power up design and development teams

Paris – Lectra, the technological partner for companies using fabrics and leather, introduces collaborative solutions specifically developed for design and product development teams, enabling fashion companies to affront tighter deadlines and handle wider product mixes with speed and serenity.

With the rise of e-commerce, digitally dependent consumers expect personalized, innovative fashion delivered to their doorstep at the click of a mouse.

Fashion companies are struggling to keep up with consumer demands and looking for new ways to speed up design and development without compromising quality. Design teams work faster than ever to deliver fresh, eye-catching collections. Product development teams rush to transform new designs into consumer-ready products. Given the accelerated pace of the fashion marketplace, information sharing has become vital for these teams.

Lectra has developed two new solutions to fulfill the specific needs of these teams, Lectra Connected Design and Lectra Connected Development. These solutions deliver collaborative environments that integrate business applications to aggregate, standardize and store data from all design and product development stages. These innovative solutions make every-day working life less stressful by allowing criteria-based searches, inciting users to capitalize on data links, and providing them with innovative tools and services to speed up their processes.

Lectra Connected Design facilitates collaboration between textile and fashion designers, colorists, graphic designers, technical designers and their managers by providing design teams with a connected environment. Team members can access the platform via their Lectra Kaledo® design software and Adobe® Creative Cloud, share inspiration and review collections together or upload inspirations via dedicated mobile apps. This solution gives users the visibility needed to streamline, automate and monitor the entire design process to ensure that they remain creative under severe time constraints.

In the same way, Lectra Connected Development connects patternmakers, graders, technical design teams, managers, cost and margin specialists, marker makers and sample teams through data. It allows team members to connect through Lectra Modaris® 2D and 3D patternmaking software and Lectra Diamino® Fashion marker-making software. Thanks to the wide range of standard libraries and mobile applications provided, teams will improve the efficiency of technical specifications creation. The automation of business processes and real-time communication allow product development teams to avoid errors and deliver the right product quality and fit.

“We recognize first and foremost that today’s fashion industry professionals need to feel well-equipped and at ease in order to perform well under tight deadlines,” explains Céline Choussy Bedouet, Chief Marketing and Communications Officer, Lectra. “We are confident that by introducing a new and easy way of collaborating through sound data management, both offers will help design and product development teams work faster and more easily to build quality into the products they design and develop. That way, they can reach their fullest potential as key contributors to their companies’ success.”

More information:
Lectra, PLM Design
Source:

Lectra

print close
more
World first ROICA™ premium sustainable stretch fiber got prestigious Senken Shimbun “Synthetic Fiber Prize”
19.03.2018

World first ROICA™ premium sustainable stretch fiber got prestigious Senken Shimbun “Synthetic Fiber Prize”

Asahi Kasei ROICA™ premium stretch fibre has received the prestigious Senken Shimbun Synthetic Fiber Prize with the sustainable GRS certified yarn.
ROICA™ specialties captured the attention of Senken Shimbun, a daily Japanese fashion newspaper, based in Tokyo, Japan.  Founded in 1956, today provides news, research data and new business ideas, and has a great influence over the fashion business in Japan. It helps fashion products throughout Japan to be distributed in Japan's domestic market, and serves as a platform targeting overseas markets.
The award is limited to Japanese companies. This year ROICA™ GRS certified yarn was selected in the Sustainable category thanks to its unique sustainable characteristics.

Asahi Kasei ROICA™ premium stretch fibre has received the prestigious Senken Shimbun Synthetic Fiber Prize with the sustainable GRS certified yarn.
ROICA™ specialties captured the attention of Senken Shimbun, a daily Japanese fashion newspaper, based in Tokyo, Japan.  Founded in 1956, today provides news, research data and new business ideas, and has a great influence over the fashion business in Japan. It helps fashion products throughout Japan to be distributed in Japan's domestic market, and serves as a platform targeting overseas markets.
The award is limited to Japanese companies. This year ROICA™ GRS certified yarn was selected in the Sustainable category thanks to its unique sustainable characteristics.

On March 14th, 2018 Senken Shimbun organized an event to conferee the awards and in this occasion ROICA™ displayed unique fabrics and garments created with this awarded ROICA™ yarn by premium producers as Iluna Group S.p.A (IT), M.I.T.I. (IT), Tessitura Colombo Antonio(IT), Tintex Textiles(PT)  and international top level brands as Cosabella (US), Maloja (DE) and Triumph (CH.
 
MORE DETAILS ABOUT THIS AWARD WINNING PRODUCT
The Senken Award winning ROICA™ yarn is part of the ROICA™ Eco-Smart family, a world-first range of unique innovative and responsible made premium stretch fibers, that today can offer 2 real sustainable solutions. For time, one of the two types was awarded! The ROICA™ yarn certified GRS (Global Recycled Standard by TEXTILE EXCHANGE) version 3 certified yarn with more than 50% pre-consumer recycled content.

Two of the companies above: M.I.T.I. and TINTEX already garnered a huge recognition at ISPO last February also thanks to the uniqueness of this smart ROICA™ yarn:
M.I.T.I. Spa presented at ISPO Green Soul, a new fabric line made with fully recycled fibers. Ten different fabrics belong to this products line whose composition is both polyamide/ROICA™ Eco-Smart family and Polyester/ROICA™ Eco-Smart family offering a 100% recycled fiber warp knitted stretch fabrics. The winning Bluesign certified fabric is called Thermal Green and is a high-end brush back warpknit fabric, made with recycled Polyamide and ROICA™ Eco-Smart family.Tintex Textiles Garnered Its Second ‘ISPO Best Product Award’ In TexTrends in the SOFT EQUIPMENT category with a circular economy centric material, branded B.Cork™, a unique technology that sources certified pre-consumer cork waste.  Following a patent pending hi-tech lamination of a water based, formaldehyde and solvent free coating, a breathable, natural and waterproof supersoft touch is achieved. And last but not least is using ROICA™ Eco-Smart family premium stretch qualities  to fulfil fit and comfort needs.
 
 AWARD WINNING ROICA YARN IN BRANDS COLLECTIONS

  • Maloja, an outdoor speciality brand with its roots in nature and  wellbeing, Maloja is presenting  many lines using ROICA™, and  here we present a new mid layer  technical x-country ski set with  fabrics from MITI, using the GRS  certified yarn part of the ROICA™ Eco- Smart family of responsible Stretch.
     
  • COSABELLA produced by Collezioni SRL: The brand sells in over 100 countries, with a premium collection of 2000 styles for every sector of lingerie and leisurewear. Latest styles use the Eco-Lace by Tessitura Colombo Antonio fabrics made with ROICA™ Eco Smart family for their more luxurious upscaled lines.
     
  • TRIUMPH LINGERIE: whose latest designs use the new stretch lace from ILUNA Group and the GRS certified yarn part of the ROICA™ Eco Smart family, slips and lingerie sets for the Essence by Triumph collection.
More information:
ROICA™ stretch fibre
Source:

GB Network

print close
more
An Evening of Smart Innovation that Sets New Standards for Fashion
15.03.2018

An Evening of Smart Innovation that Sets New Standards for Fashion

On Thursday, March 22nd, C.L.A.S.S., with support from the Council of Fashion Designers of America (CFDA), will invite fashion’s industry leaders, designers and members of the press to celebrate An Evening of Smart Innovation.  An exceptional team of artists, filmmakers, food and textile designers have created an immersive experience that will engage the guests’ senses highlighting that smart innovation is the new standard for fashion. The experience will examine the four key areas that are vital to C.L.A.S.S.’s business philosophy: Heritage - Smart Innovation - Circular Economy - Design Responsibility. The commitment to those principles and to forward thinking led to C.L.A.S.S. having been nominated as one of the European Business Awards 2017/2018 Ones to Watch for exceptional growth, significant innovation along with an ethical approach to business.

On Thursday, March 22nd, C.L.A.S.S., with support from the Council of Fashion Designers of America (CFDA), will invite fashion’s industry leaders, designers and members of the press to celebrate An Evening of Smart Innovation.  An exceptional team of artists, filmmakers, food and textile designers have created an immersive experience that will engage the guests’ senses highlighting that smart innovation is the new standard for fashion. The experience will examine the four key areas that are vital to C.L.A.S.S.’s business philosophy: Heritage - Smart Innovation - Circular Economy - Design Responsibility. The commitment to those principles and to forward thinking led to C.L.A.S.S. having been nominated as one of the European Business Awards 2017/2018 Ones to Watch for exceptional growth, significant innovation along with an ethical approach to business.

The March 22nd date is a deliberate choice as it marks International Water Day and serves as a way to advocate for sustainable water management, a key issue in textile manufacturing. Many of C.L.A.S.S.’s partners, such as ECOTEC® by Marchi&Fildi, Bemberg™ and ROICA™ by Asahi Kasei and TINTEX Textiles use technological breakthroughs to offer fashion materials that provide significant reductions in water during the manufacturing process, an important step toward responsible future fashion systems.

“In touting significant reductions in water, energy usage and CO2 emissions, C.L.A.S.S.’s  message has always been one of consistency but now with today’s customers becoming increasingly environmentally mindful, the timing has never been better to bring awareness to the ways that responsible sustainability can be incorporated, in an authentic way, into a fashion or lifestyle brand increasing the bottom line without compromising design integrity,” said C.L.A.S.S. founder Giusy Bettoni.

The future is already here; guests can see and feel materials during the event that showcase technological breakthroughs currently available. While C.L.A.S.S. works with leading brands that practice responsible design, the next step is to expand their reach and set a new level of standards that benefit the entire industry. To that end, they have identified C.L.A.S.S. Education, their new division, as an essential learning resource to support fashion schools. The new division was co-founded with James Mendolia, professor in the MFA Fashion Design program at Fashion Institute of Technology. C.L.A.S.S. will also launch C.L.A.S.S. e-commerce platform, which will sell partner materials to support emerging designers and fashion start-ups.

Thank you to all of our partners for making this event and the last ten years possible: Bacx by Centro Seta, Bemberg™ by Asahi Kasei, ECOTEC® by Marchi & Fildi, Organic Cotton Colours, Re.VerSo™, ROICA™ by Asahi Kasei, TINTEX Textiles, Zignone.

More information:
Fashion C.L.A.S.S.
Source:

C.L.A.S.S.

print close
more
Montalvo Launches New Line of Axial Activated Core Chucks
15.03.2018

Montalvo Launches New Line of Axial Activated Core Chucks

Montalvo, international specialists in web tension control, announces its newest product offering, Axial Activated Core Chucks. As part of their “Defender Series Core Chucks,” the Montalvo Axial Activated Core Chuck is designed for shaft-less unwinding and rewinding applications requiring maximum roll/core gripping and/or utilizing floor pick up.
The Defender Axial Activated (DAA) Core Chucks, sometimes referred to as lug chucks, are cost effective, rugged, and durable core chucks capable of withstanding even the dustiest environments while being simple to utilize.
An exclusive “safe lock” model expands the capabilities of the AA core chucks even further by resolving any potential risk of the core not fully tightening and ensuring the roll is always perfectly concentric. Cores are engaged as a result of radial lug expansion as the core is loaded into the chuck, ensuring maximum grip so you can Achieve More.

Montalvo, international specialists in web tension control, announces its newest product offering, Axial Activated Core Chucks. As part of their “Defender Series Core Chucks,” the Montalvo Axial Activated Core Chuck is designed for shaft-less unwinding and rewinding applications requiring maximum roll/core gripping and/or utilizing floor pick up.
The Defender Axial Activated (DAA) Core Chucks, sometimes referred to as lug chucks, are cost effective, rugged, and durable core chucks capable of withstanding even the dustiest environments while being simple to utilize.
An exclusive “safe lock” model expands the capabilities of the AA core chucks even further by resolving any potential risk of the core not fully tightening and ensuring the roll is always perfectly concentric. Cores are engaged as a result of radial lug expansion as the core is loaded into the chuck, ensuring maximum grip so you can Achieve More.

Montalvo’s Director of Sales and Marketing, Bryon Williams says, “Our new axial activated chucks and total Defender series of core chucks gives our customers a superior product offering in performance, quality, cost, safety, and service life. Axial activated chucks are a cost-effective way to “defend” against core damage, extending their service life while maintaining the highest levels of safety. The drop-in replacement design ensures no additional installation requirements for customers looking to upgrade their current core chucks.”

Additional DAA Core Chuck features include:
•    Rapid Expansion Jaws - ensure secure roll control immediately upon engagement
•    Dual Core Models - for processes utilizing multiple core sizes - one chuck, two core sizes
•    E-Flange™ Option - eliminates operator interaction in removing cores while making core ejection fast and easy; reducing risk of jammed cores
•    Photocell Ready™ Option - allows use of photocell or other sensors
•    Customer Specified Mounting Holes - ready for immediate installation upon delivery
•    Several Finishes Available - Black Oxide standard, Nickel Plating optional
•    Drop-In Replacement Design - for easy upgrading of existing installations

About Montalvo
Since 1947 the Montalvo Corporation has specialized in manufacturing, integrating, retrofitting and servicing a wide range of tension control products for a variety of industries including, converting, paper, film, foil, nonwovens, plastic, corrugated, packaging, medical, composite and more. Montalvo’s products include load cells, tension controllers, tension indicators, amplifiers, tension control brakes and clutches, sensors, safety chucks, and core chucks. Montalvo has four worldwide offices in the USA, Denmark, Germany & China. http://www.montalvo.com

Montalvo Launches New Line of Axial Activated Core Chucks (c) The Montalvo Corporation Montalvo Launches New Line of Axial Activated Core Chucks (c) The Montalvo Corporation
More information:
Montalvo
Source:

The Montalvo Corporation

print close
more
20th anniversary of the JEC Innovation Awards (c) GROUPE JEC - Thierry-Alain TRUONG
07.03.2018

20th anniversary of the JEC Innovation Awards

  • JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

  • JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

“JEC Group supports innovation. In 1998, it created the first award dedicated to composites, as a way to promote and reward the sector’s champions. Thanks to the work of JEC Group’s teams, the program has become an international benchmark. Each year, we receive more than a hundred applications from all over the world. Selection is now based on criteria like the level of involvement of the innovation’s partners in the value chain, the technical nature of the innovation, or its commercial applications,” explains JEC Group President & CEO Frédérique Mutel.
A new feature this year is that the jury revealed the winners during the ceremony, and the public could choose their favorite innovation before, during, and after the ceremony. So there is still time to vote! Votes are opened until Thursday March 8th, 5pm http://innovationawards.jec-world.events
Did you miss the ceremony?

11 AWARD WINNERS:
AEROSPACE APPLICATION
Winner:
AeroComposit, JSC (Russia) and its partner Solvay (United Kingdom)

  • Infusion technology for an aircraft wing

The use of infusion technology to manufacture primary structural components for an aircraft wing. The technology makes it possible to create extra-long, integrated composite structures with complex aerodynamic shapes.

AEROSPACE PROCESS 
2 tied winners!
Winner: Airbus (Germany) and its partners, BMW Group (Germany), Technical University of Munich (TUM) (Germany), Neue Materialien Bayreuth GmbH (Germany), Werkzeugbau Siegfried Hofmann GmbH (Germany), BASF SE (Germany), Foldcore GmbH (Germany), Neenah Filtration (Germany) and SGL Carbon GmbH (Germany)

  • Complex structural applications for MAI sandwich technology

Cost-effective production of a complex 2.5D structure made of thermoplastic composite sandwich, with very short cycle times: under 5 minutes for aerospace materials and 2.5 minutes for automotive materials.

Winner: M. Torres Diseños Industriales SAU (Spain)
Moldless process to manufacture one-piece parts
A new manufacturing process for oversized one-piece reinforced composite structures, without requiring the use of complete molds.

AUTOMOTIVE APPLICATION
Winner: Ford Werke GmbH (Germany) and its partners, Gestamp (United Kingdom), GRM Consulting (United Kingdom) and University of Warwick (United Kingdom)

  • Lightweight composite automotive suspension part

Structural suspension part made of lightweight composite, using a brand-new patented process for prepreg/SMC/steel overmolding that was designed using a new computer-aided engineering (CAE) technology.

AUTOMOTIVE PROCESS
Winner: Audi AG (Germany) and its partners, Voith Composites GmbH & Co. KG (Germany), Dow Automotive (Switzerland), and Zoltek Corp. (United States)

  • Series production of a rear panel module made of carbon composite

For the first time, the potential of carbon fiber reinforced plastics (CFRP) is used to full advantage in series production with a new rear panel module and cost-effective production technologies.

CONSTRUCTION & INFRASTRUCTURE
Winner: Komatsu Seiren Co., Ltd. (Japan) and its partners, Kanazawa Institute of Technology (Japan) and Nagase ChemteX Corporation (Japan)

  • Cabkoma cable made of CFRTP

Komatsu Seiren has developed a cable made of molded carbon fiber reinforced thermoplastic (CFRTP), using a very cost-effective process that consists in polymerizing a thermoplastic epoxy resin in situ.

MARINE
Winner: Uljanik JSC (Croatia)

  • Composite cargo decks for a vehicle carrier

On the SIEM Cicero, a vehicle carrier with a capacity of 7,000 vehicles, glass-fiber reinforced composites are used for a number of the structures for the cargo decks, thereby considerably reducing the ship’s weight, fuel consumption and CO2 emissions.

RAILWAY
Winner: ELG Carbon Fibre Ltd. (United Kingdom) and its partners, Alstom Transport (United Kingdom), Magma Structures (United Kingdom), the University of Birmingham (United Kingdom), and the University of Huddersfield (United Kingdom)

  • A bogie frame made of optimized lightweight carbon fiber

This project has developed the very first carbon-fiber bogie frame that uses a recycled material, making it possible to overcome the obstacles to a commercial adoption of this type of structure.

SPORTS & LEISURE
Winner: BMW Group (Germany) and its partners EDAG Engineering GmbH (Germany), KraussMaffei Technologies GmbH (Germany), Chr. Karl Siebenwurst GmbH & Co. KG (Germany), TUM-LCC (Germany), Automation W + R GmbH (Germany), and FHG-IGCV (Germany)

  • A modular construction system for the rear swing arm suspension of a motorcycle

A modular system to produce a complex-shape swing arm suspension reinforced with carbon fiber. The system can adjust the mechanical properties on a case-by-case basis, for a competitive cost and weight compared to metal solutions.

SMART CITIES
Winner: MC Materiales Compuestos (Argentina) and its partners, Plaquimet (Argentina), Purcom (Brazil), IS Groupe - Composite Integrity (France), and G12 Innovation (Brazil)

  • The Wet Core Pod composite housing module

The Wet Core Pod is a composite housing module with an industrialization potential that can facilitate the most complex, costly and difficult step in a construction project.

SUSTAINABLE DEVELOPMENT
Winner: Cetim-Cermat (France) and its partner, CETIM (France)

  • “3-in-1” line for producing recycled composites

A modular line that uses an innovative thermomechanical process to make large panels from recycled composites or plastics. The panels are then thermoformed into parts.
 

More information:
JEC Innovation Awards JEC World 2018
Source:

Dorothée David & Marion RISCH, Agence Apocope

print close
more
(c) Koch Membrane Systems
28.02.2018

KPR Mill Switched to KMS PURON® MBR Technology

Wilmington, MA – March 1, 2018 - Koch Membrane Systems, Inc. (KMS), a global leader in membrane filtration technologies, announced today that it has provided PURON® Membrane Bio-Reactor (MBR) modules as part of a system upgrade to the wastewater treatment facility of KPR Mill Limited. KPR Mill is one of the largest apparel manufacturing companies in India. KPR Mill decided to upgrade their wastewater treatment facility from an old conventional plant to an advanced MBR technology due to its environmental commitment to ensure zero liquid discharge (ZLD) by recycling 100% of their wastewater. Among the key reasons for selecting the PURON® MBR modules are its unique design, including single header and central aeration, reliable and consistent operation, and strong after-market support from KMS.
 

Wilmington, MA – March 1, 2018 - Koch Membrane Systems, Inc. (KMS), a global leader in membrane filtration technologies, announced today that it has provided PURON® Membrane Bio-Reactor (MBR) modules as part of a system upgrade to the wastewater treatment facility of KPR Mill Limited. KPR Mill is one of the largest apparel manufacturing companies in India. KPR Mill decided to upgrade their wastewater treatment facility from an old conventional plant to an advanced MBR technology due to its environmental commitment to ensure zero liquid discharge (ZLD) by recycling 100% of their wastewater. Among the key reasons for selecting the PURON® MBR modules are its unique design, including single header and central aeration, reliable and consistent operation, and strong after-market support from KMS.
 
KPR Mill has been using a conventional Effluent Treatment Plant (ETP).  Their old technology involved high chemicals consumption which required high maintenance levels, resulting in frequent production shut downs due to ETP failures.  The new MBR plant is designed to handle 3000 m³/day of textile effluent, utilizing two MBR trains. Initial results show that KPR Mill has reduced chemical costs and eliminated downtime, maximizing textile production. In addition to savings in operational cost and production optimization, KPR strives for an eco-friendly textile processing system. KPR’s selection of PURON® membranes help them achieve their goals of environmental sustainability.
 
“The membrane bioreactor technology from KMS operates very reliably and has resulted in a significant reduction of chemical, operating and maintenance costs of about 10%,” said Mr. C.R. Ananda Krishnan, executive director of KPR Mill Limited. “And as we are a trend setter in using eco-friendly advanced technologies, we were happy to have PURON® MBR as a technology partner who fits our needs and our vision.”
 
“KMS has developed advanced membrane solutions for the textile industry,” said Mr. Manny Singh, President of KMS. “Our products and services help the industry treat wastewater to meet strict discharge and reuse targets, and create value through various chemical recovery processes.”

More information:
Koch Membrane Systems filtration technologies
Source:

Rob Carlton, Koch Membrane Systems

print close
more
Lectra ESCP Europe (c) Lectra
27.02.2018

Technology propelled by Industry 4.0 brings new opportunities for the fashion industry

  • Lectra – ESCP Europe ‘Fashion & Technology’ Chair round-table event hears panelists emphasize the need for fashion companies to embrace Industry 4.0.

Paris, February 27, 2018 – Lectra, the technological partner for companies using fabrics and leather, the French business school ESCP Europe and their joint ‘Fashion & Technology’ Chair explored the impact of Industry 4.0 on fashion’s value chain during a recent insightful round table discussion at ESCP Europe’s London campus.
For the participants Robert Diamond, Founder and CEO, Fernbrook Partners; Dan Hartley, Global Head of Digital Commerce, AllSaints; Laëtitia Hugé, Vice-President, Product Marketing, Lectra; Pierre Mercier, Senior Partner and Managing Director, Boston Consulting Group; and Evelthon Vassilou, CEO, Alison Hayes, there was consensus. Industry 4.0 represents unparalleled opportunities to take the fashion industry forward.

  • Lectra – ESCP Europe ‘Fashion & Technology’ Chair round-table event hears panelists emphasize the need for fashion companies to embrace Industry 4.0.

Paris, February 27, 2018 – Lectra, the technological partner for companies using fabrics and leather, the French business school ESCP Europe and their joint ‘Fashion & Technology’ Chair explored the impact of Industry 4.0 on fashion’s value chain during a recent insightful round table discussion at ESCP Europe’s London campus.
For the participants Robert Diamond, Founder and CEO, Fernbrook Partners; Dan Hartley, Global Head of Digital Commerce, AllSaints; Laëtitia Hugé, Vice-President, Product Marketing, Lectra; Pierre Mercier, Senior Partner and Managing Director, Boston Consulting Group; and Evelthon Vassilou, CEO, Alison Hayes, there was consensus. Industry 4.0 represents unparalleled opportunities to take the fashion industry forward.

From brand to manufacturer, panelists from across the value chain emphasized the necessity for the industry to embrace the alliance between man and machines to leverage massive benefits, from quicker decision-making to cost-reduction.
Exploring the advantages of Industry 4.0 technology, Evelthon Vassilou commented: “Interpreting the data of what is, and isn’t, selling should help to speed up decisions. You can react very quickly across the entire supply chain, and either stop producing something unsuccessful or ramp up production if successful. Data and data analytics is not sufficient, to succeed this also requires a high degree of trust and integration between retailers and suppliers.”

“It’s about using technology to deliver continuous improvement in everyday business,” said Robert Diamond. “People are not good at making a large volume of repeatable decisions with many different data inputs”. Identifying where machines, and where people, bring value is an important part of embracing Industry 4.0. “If the business decision, or the outcome of the resolution tomorrow, is pretty much the same as what happened yesterday, then there is a chance for machine learning to help improve the situation.”
For Pierre Mercier, technology propelled by Industry 4.0 is disrupting former sources of competitive advantage, “forcing companies to rethink how they want to compete in their respective industries, and how to use data to compete differently. The common denominator in the fashion ecosystem is that everyone is facing the opportunity for a step change and need to figure out where to double down and accelerate their transformation.”

“Agility and flexibility are increasingly important for fashion players. Cutting-edge technology is supporting the fashion industry as it steps into the 4.0 era, ensuring businesses have the right solutions in their own ecosystems, to effectively harness the right data to make the right decisions,” stated Laëtitia Hugé.

At UK fashion brand AllSaints, valuable data harnessed from the net promoter score is paramount for their business. “We take customer feedback very seriously and we use it as a framework for our internal roadmap - from a tech and development point of view, through to design and fit, the customer is at the heart of everything we do,” stated Dan Hartley. In addition, he underlined that using technology across communications “will be huge going forward for AllSaints. From supply chain to store teams, we aim to use a cloud-based system that works within our own eco-system, complementing our agile model.”
The round table was moderated by the co-director of Lectra-ESCP Europe ‘Fashion and Technology’ Chair Valérie Moatti.
 

Lectra ESCP Europe
More information:
Lectra-ESCP Europe Industry 4.0
Source:

Lectra, Nathalie Fournier-Christol

print close
more
Logo CHOMARAT (C) CHROMARAT
26.02.2018

CHOMARAT presents its latest innovations at the 2018 JEC World

CHOMARAT, the composite reinforcement specialist group, is launching its multiaxial glass NCF for thermoplastic composites. The unique patented stitching yarn used can withstand processing temperatures to 400°C, making it an innovative industrial solution for thermoplastic composites and an alternative to the woven reinforcements used especially in the automotive sector. For the first time, CHOMARAT is also exhibiting a unidirectional carbon NCF reinforcement that is adapted to the productivity and performance requirements in the wind energy sector.

CHOMARAT, the composite reinforcement specialist group, is launching its multiaxial glass NCF for thermoplastic composites. The unique patented stitching yarn used can withstand processing temperatures to 400°C, making it an innovative industrial solution for thermoplastic composites and an alternative to the woven reinforcements used especially in the automotive sector. For the first time, CHOMARAT is also exhibiting a unidirectional carbon NCF reinforcement that is adapted to the productivity and performance requirements in the wind energy sector.

AN INNOVATIVE INDUSTRIAL SOLUTION TO REINFORCE AUTOMOTIVE THERMOPLASTICS
Thanks to a unique patented stitching yarn, the glass NCF reinforcement (G-PLY™) developed by CHOMARAT offers new possibilities in thermoplastic RTM and organosheet processes. “This is an especially innovative solution, utilizing stitching yarns that are compatible with processing temperatures to 400°C. These multiaxials improve the performance and provide a lot of construction freedom in terms of fibre orientation. These new design possibilities contribute to structural optimization. The quest for more lightweight vehicles, shorter cycle times and lower cost is a major issue for all builders,” explains CHOMARAT Automotive Market Manager Francisco De Oliveira.
This new heat-stable G-PLY™ reinforcement can withstand very high processing temperatures without deformation and provides optimal mechanical performance.

A CARBON UD TO REINFORCE EXTRA-THICK WIND TURBINE STRUCTURES
For the first time, CHOMARAT is exhibiting an infusion-moulded laminate made with 150 plies of its new unidirectional carbon C-PLY™. This 600g/m², high-permeability NCF can be used to create extra-thick structures, in particular the wind-turbine blade stiffeners, or spar caps. “Cost reduction is the challenge in the wind energy industry. Increasing the blade length by incorporating carbon stiffeners increases power, and so it also lowers the cost of the energy,” says CHOMARAT Wind Energy Market Manager Raphaël PLEYNET. The carbon UD developed by CHOMARAT provides a solution to achieve the goal to optimize the weight/power ratio. The UD’s high permeability reduces cycle times and lowers the blade production costs.

Professor Sung Ha from the University of Hanyang will give a conference on composite challenges in the wind energy sector at 11:30 am on Wednesday, 7 March 2018 at JEC World.
Established in 1898, CHOMARAT is an international industrial textile group, involved in three businesses: Composites Reinforcements, Construction Reinforcements, Coatings & Films–Textiles. The privately held company operates in France, Tunisia, the United States and China to service its global customers.
CHOMARAT leads a strong innovation strategy, rising to challenges, developing materials for the future. Hence, the Group invests in new technologies and enters into collaborative research programs with universities and technical centers worldwide.
CHOMARAT offers strong technical know-how and mastery of complex technologies in fields ranging from automotive, aerospace, sports, energy, marine, construction, and also in markets requiring creativity and expertise, like luxury goods.

AN INNOVATIVE INDUSTRIAL SOLUTION TO REINFORCE AUTOMOTIVE THERMOPLASTICS (C) CHROMARAT A CARBON UD TO REINFORCE EXTRA-THICK WIND TURBINE STRUCTURES
More information:
CHOMARAT JEC World 2018
Source:

Dorothée DAVID & Marion RISCH, AGENCE APOCOPE

print close
more
LECTRA
20.02.2018

Dual and Lectra enter into long-term partnership

Paris, February 20, 2018 – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce its partnership with Dual through the signing of a global agreement covering the Korean automotive supplier’s fabric seating and airbag businesses.

Backed by world-class research and development, Dual strives to meet evolving customer needs by offering innovative new automotive interior materials and advanced safety textiles. The supplier’s automotive trim and airbag divisions serve Hyundai-Kia Automotive Group, the fourth largest automaker in the world. Currently undergoing rapid expansion, Hyundai-Kia is counting on Dual to increase its manufacturing capabilities in the high-growth regions where the group operates, including China, Eastern Europe, Turkey and South America.

Paris, February 20, 2018 – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce its partnership with Dual through the signing of a global agreement covering the Korean automotive supplier’s fabric seating and airbag businesses.

Backed by world-class research and development, Dual strives to meet evolving customer needs by offering innovative new automotive interior materials and advanced safety textiles. The supplier’s automotive trim and airbag divisions serve Hyundai-Kia Automotive Group, the fourth largest automaker in the world. Currently undergoing rapid expansion, Hyundai-Kia is counting on Dual to increase its manufacturing capabilities in the high-growth regions where the group operates, including China, Eastern Europe, Turkey and South America.

A key feature of the global agreement is Lectra’s commitment to help Dual optimize its manufacturing processes with the aim of improving its cost structure. Lectra’s most advanced technologies—Vector® for vehicle seating and FocusQuantum® for airbags—and unique expertise in cutting room processes are crucial to helping Dual reach its operational excellence objectives.

The agreement designates Lectra as sole supplier for high-ply cutting equipment and services for Dual’s seating and interiors business, and laser cutting equipment and services for the company’s airbag cushion business at six plants located in Korea and China.
For its operations in Korea and China, Dual will gain access to the full array of expertise, customer support and field services that Lectra provides worldwide. Lectra’s complete customer support structure enables maximum uptime through remote diagnostics and predictive maintenance.

“Dual will benefit most from this agreement by containing costs in the cutting room,” remarks Ong Jae-Yeol, Fabric and Seat BU Executive Managing Director, Dual. “This is precisely where Lectra’s expertise can help us gain a competitive advantage.”
“We are pleased to enter into this global partnership with Dual, to support them—not only with our best-in-class cutting technology, but also with Lectra’s expertise in cutting processes,” states Javier Garcia, Senior VP Automotive Sales, Lectra. “Our unique know-how contributes to Dual’s pursuit of operational excellence—the source of sustainable competitive advantage for car seat cover and airbag cushion suppliers.”

More information:
Lectra Vector® FocusQuantum®
Source:

Nathalie Fournier-Christol, Responsable des Relations Presse Groupe, press department, communications

print close
more
New Horizons open for ECOTEC® by Marchi & Fildi yarn ECOTEC®
13.02.2018

New Horizons open for ECOTEC® by Marchi & Fildi yarn

  • Confirming a Circular Economy focus
  • 2 additional million investment in highly specialized process technology
  • Launch of first ECOTEC® Smart Knitwear innovations
  • New Market Partnerships

The ECOTEC® by Marchi & Fildi transformation into excellence yarns is back at Première Vision sharing amazing new steps in its journey towards smart innovation within a circular economy approach. 

First of all the company is proud to announce a 2 million euros investment in highly specialized process technology always aiming at improving ECOTEC® process and its yarn product range. This is another confirmation about the real ongoing commitment from Marchi & Fildi to position ECOTEC® as a key player in the world of responsible innovation.

On top of this, ECOTEC® is also widening its portfolio range thanks to the introduction of special yarns with counts and styles designed for Knitwear production: 

  • Confirming a Circular Economy focus
  • 2 additional million investment in highly specialized process technology
  • Launch of first ECOTEC® Smart Knitwear innovations
  • New Market Partnerships

The ECOTEC® by Marchi & Fildi transformation into excellence yarns is back at Première Vision sharing amazing new steps in its journey towards smart innovation within a circular economy approach. 

First of all the company is proud to announce a 2 million euros investment in highly specialized process technology always aiming at improving ECOTEC® process and its yarn product range. This is another confirmation about the real ongoing commitment from Marchi & Fildi to position ECOTEC® as a key player in the world of responsible innovation.

On top of this, ECOTEC® is also widening its portfolio range thanks to the introduction of special yarns with counts and styles designed for Knitwear production: 

  • ECOTEC® Moulinè and micromoulinè yarns: offering amazing colour effects and precious touch always fresh and cool. Considering that ECOTEC® yarns are not dyed, it is quite a smart look and achievement!
  • ECOTEC® cable: soft twists for full body hand, authentic touch and amazing colour cards available. 

More technology, new applications… these facts are opening up the doors also to new ECOTEC® partners in the market. It is essential to offer brands and designers a wider and interesting choice in terms of ECOTEC® fabrics.

Based on this Marchi & Fildi is presenting:  

The ECOTEC® COLLECTION an exclusive seasonal range of ECOTEC® fabrics created by ECOTEC® partners including Ledatex (booth 5N29), Nalya (booth 5L52), 3C Company S.r.l., Sidònios Knitwear (booth 5P32-5R13), O’Jersey (booth 5N22) alongside longstanding accredited partners such as Lanificio COMATEX (booth 5H54, 5J53), Manifattura CBM, Euromaglia Srl (booth 5P17), Tessuti & Tessuti srl (booth 5M30), RDD and Tintex Textiles (booth 5N56, 5P55).

That is not all, this season ECOTEC® is proud to present an exclusive range of smart textile design solutions from the Marchi & Fildi research and development center in cooperation with the UK expert textile trend forecaster Sandy Mac Lennan.  It is called ECOTEC ® INNOVATION , and it is an  inspiring line  developed with the clear goal of highlighting ECOTEC® uniqueness with solutions that are real avant-garde in fashion trends. Pegasus (80% ECOTEC® cotton, 20% cotton), Chagall (50% ECOTEC® cotton, 40% cotton, 10% cashmere) and Phoenix (52% ECOTEC® cotton, 48% recycled polyester) are the fundamentals that gave birth to 10 exclusive innovative qualities. Nets, knits, patterned woven, degradè, plissè, new tonal summer plaids and bold stripings on fine grounds. An inspiring contemporary range, dedicated to ECOTEC® partners, which brings ECOTEC® at the forefront of textile design.  Something to explore at 360° degrees!

Recent ECOTEC® brand adoptions include Jan’n June, the German brand, founded in 2014, whose aim is to offer garments that are fashionable, affordable and environmentally responsible. Produced by a family owned company in Poland, Jan’n June operate s a strong transparency policy with printed QR-Codes on the hangtags to give its customer’s all the key information about fabrics, production values and certification for every garment.

Furthermore there is Mundotextil, a Portuguese home textiles manufacturer. Mundotêxtil, together with ECOTEC® has just launched, with great success at Heimtextil, a market-first, world unique and responsibly made cotton towel innovation that really saves on water use, energy and CO2 emissions.

New Horizons open for ECOTEC® by Marchi & Fildi yarn ECOTEC® New Horizons open for ECOTEC® by Marchi & Fildi yarn ECOTEC®
More information:
Ecotec Marchi & Fildi
Source:

GB Network

print close
more
HanesBrands invests in 19 Baldwin Precision Application Systems
13.02.2018

HanesBrands invests in 19 Baldwin Precision Application Systems

Baldwin Technology Company Inc.’s exclusive and innovative Precision Application System—which realizes substantial savings of water, chemistry and energy while increasing productivity—was designed with companies like HanesBrands in mind.

HanesBrands—whose venerable apparel lines include Hanes, Champion, Playtex, Bali and Maidenform, to name a few—has set significant environmental stewardship goals to reduce energy consumption and water use. The company’s recent investment in Baldwin’s Precision Application Systems, with a textile finishing technology that allows for accurate and controlled placement and therefore, reduced use of end-of-line chemicals and water, will help HanesBrands achieve its environmental sustainability goals. Additionally, Baldwin’s groundbreaking application system improves output through greater flexibility, fewer production steps and increased uptime.

Baldwin Technology Company Inc.’s exclusive and innovative Precision Application System—which realizes substantial savings of water, chemistry and energy while increasing productivity—was designed with companies like HanesBrands in mind.

HanesBrands—whose venerable apparel lines include Hanes, Champion, Playtex, Bali and Maidenform, to name a few—has set significant environmental stewardship goals to reduce energy consumption and water use. The company’s recent investment in Baldwin’s Precision Application Systems, with a textile finishing technology that allows for accurate and controlled placement and therefore, reduced use of end-of-line chemicals and water, will help HanesBrands achieve its environmental sustainability goals. Additionally, Baldwin’s groundbreaking application system improves output through greater flexibility, fewer production steps and increased uptime.

Mike Abbott, HanesBrands Global Director of Research and Innovation, said: “Baldwin fulfilled our requirements to provide a solution that optimizes our productivity while reducing our environmental impact.” HanesBrands thoroughly evaluated the technology for eight months in live production conditions with positive results. Abbott continued: “During the evaluation period of the system, we have had outstanding results in productivity increase, and we can clearly see that this technology will make a great contribution to our future efficiency and sustainability savings.”

Peter Hultberg, Chief Commercial Officer at Baldwin, said: “We are honored to partner with one of the world’s strongest apparel brands to help the company achieve not only its business goals, but also its corporate responsibility goals. The trust the HanesBrands team placed in Baldwin and our innovative application technology marks an important milestone for Baldwin and our quest to redefine the standards of sustainable textile finishing.”

The HanesBrands contract includes an option to supply 15 additional Precision Application Systems. 

HanesBrands invests in 19 Baldwin Precision Application Systems
More information:
Baldwin Technology Company Inc. HanesBrands
Source:

Baldwin Technology Company Inc.

print close
more
13.02.2018

IMPRIMA strengthens its Operations in the USA, acquiring City Prints and Premier Fabrics

The acquisition is the fifth strategic deal finalized by Imprima Spa , holding controlled by the Italian private equity fund Wisequity IV.

IMPRIMA S.p.A., the holding company of the multinational group dedicated to textile printing and finishing, announces the acquisition of City Prints and the twin company Premier Fabrics, both American companies specialised in printed textiles. 

Imprima, controlled by Wise SGR through the Italian private equity fund Wisequity, now strengthens its strategic positioning, consolidating its global presence as a leading player in the field of printing and textile finishing for international retailers and fashion brands.

The acquisition is the fifth strategic deal finalized by Imprima Spa , holding controlled by the Italian private equity fund Wisequity IV.

IMPRIMA S.p.A., the holding company of the multinational group dedicated to textile printing and finishing, announces the acquisition of City Prints and the twin company Premier Fabrics, both American companies specialised in printed textiles. 

Imprima, controlled by Wise SGR through the Italian private equity fund Wisequity, now strengthens its strategic positioning, consolidating its global presence as a leading player in the field of printing and textile finishing for international retailers and fashion brands.

City Prints and Premier Fabrics, founded in 1997 and headquartered in New York and Los Angeles, are specialized in textile printing for the programmed collection market. The companies supply printed fabrics, based on proprietary design, to major American retailers such as Walmart, Target and Macy's, to  fashion brands such as Ralph Lauren, Calvin Klein and Tommy Hilfiger, and to online retailers such as Amazon. The companies serve retailers and brands through leading private label intermediaries, currently sourcing prints and garments mainly from China.  

As in the case of the previous acquisitions, the brothers Jason and Ryan Borg, co-founders of City Prints and Premier Fabrics, will maintain a leadership role in the management of the companies and become shareholders of IMPRIMA. 

 "Our entry into the IMPRIMA group is an excellent opportunity to consolidate and increase our commercial positioning in the market, through the introduction of IMPRIMA Group’s brands in the US market and the opening of a digital production facility within the US territory, relying on the technology know-how in digital printing and the financial support that IMPRIMA provides", said Jason and Ryan Borg co-owners of City Prints and Premier Fabrics, which currently show a consolidated turnover of over 23 million dollars.

“With this acquisition, IMPRIMA deals with the US market with the goal of becoming the first textile converter with full digital printing capability in this local market.  The current deep crisis of American apparel retailers is pushing the industry to reshape its current supply chain strategy, mainly based on sourcing from Far East, towards a European-like fast fashion model. IMPRIMA, through City Prints and Premier Fabrics, will allow local retailers to leverage the "Made in USA" banner to deliver a great creative experience through a local, reliable partner.", said President Valentina Franceschini, and Executive V.P. Gianluca Boni.

This acquisition of the US companies follows the recent acquisition of the Italian print converters SET, Guarisco and B-Blossom and of the German print converter KBC.  

More information:
IMPRIMA S.p.A.
Source:

GB Network

print close
more
Oerlikon Neumag at Domotex Asia 2018 Oerlikon Neumag’s Sytec One guaranties an economical BCF Carpet Yarn production for challenging processes.
13.02.2018

Oerlikon Neumag at Domotex Asia 2018

The market for the production of carpet yarn is increasingly evolving towards more demanding processes. However, beyond commodity products, standard plants can no longer fully exploit their advantages. From 20th to 22nd March 2018, Oerlikon Neumag will be presenting an economical alternative in Shanghai in hall W3, booth F03 at the Domotex asia/Chinafloor, the leading floor covering trade fair in the Asia-Pacific region: the BCF plant Sytec One with single-end technology.

If the requirements for the production of BCF yarns increase, for example, from recycled polyester or fine filaments, then this can also lead to higher breakage rates. Highly standardised production plants must then often strike compromises with regard to throughput, quality or cost-efficiency. In such cases, the Sytec One offers a good solution instead of the mostly three-end technology plants for standard processes.

Single-end technology with 98% productivity

The market for the production of carpet yarn is increasingly evolving towards more demanding processes. However, beyond commodity products, standard plants can no longer fully exploit their advantages. From 20th to 22nd March 2018, Oerlikon Neumag will be presenting an economical alternative in Shanghai in hall W3, booth F03 at the Domotex asia/Chinafloor, the leading floor covering trade fair in the Asia-Pacific region: the BCF plant Sytec One with single-end technology.

If the requirements for the production of BCF yarns increase, for example, from recycled polyester or fine filaments, then this can also lead to higher breakage rates. Highly standardised production plants must then often strike compromises with regard to throughput, quality or cost-efficiency. In such cases, the Sytec One offers a good solution instead of the mostly three-end technology plants for standard processes.

Single-end technology with 98% productivity

This BCF plant works with only one yarn (end) per position, making it ideal for demanding production processes. The reason: when a yarn break occurs only one yarn tears, all other yarns continue to run. This not only simplifies troubleshooting, it also reduces the re-threading time. In addition, less waste is produced. As a result, the productivity of the Sytec One is still over 98% for ten breakages a day, while a plant with three-end technology only reaches around 92%.

Faster processes due to a straight yarn path

In addition, the absolutely straight yarn path of the Sytec One enables significantly higher process speeds of up to 15% in spinning and texturing processes compared to multi-end technologies. Higher total titers of up to 6,000 dtex can also be produced without any problems. The gentle yarn guidance also ensures minimum friction on the individual filaments. This means less yarn breaks and a more stable process.

Optimised key component: spinning pack

Last but not least, the engineers at Oerlikon Neumag have developed a new design for the spinning pack. This central component of every BCF machine significantly influences the yarn quality. The corresponding solution for the Sytec One optimises the polymer flow in the spin pack, thus reducing the polymer dwell time. This leads to shorter product and colour change times and increases the plant efficiency. In addition, the spinning packs were widened so that yarns with up to 500 filaments can now be produced.

The product mix is decisive

In view of these advantages, the single-end Sytec One is recommended for processes with high breakage rates, fine filaments, frequent colour changes or in general when demanding processes take up an increasing share in the business. "The product mix is decisive for the choice of technology," sums up Alfred Czaplinski, Sales Manager BCF at Oerlikon Neumag. "We are happy to advise on the optimal solution and offer both single-end and three-end plant technologies." 

Good business at the Domotex Hanover, Germany

In the run-up to the trade fair, the Domotex Hanover in mid-January was already proving to be a promising harbinger. With four lively trade fair days and contract conclusions in the lower double-digit million euro range, mainly from the European and Asian markets, the order intake for Oerlikon Neumag was very good.

More information:
Oerlikon Neumag Domotex
Source:

Oerlikon Textile GmbH & Co. KG

print close
more