From the Sector

• Trade tensions among major economies elevate project risk
• Buoyant US labor market increases threat of substantial project cost overrun
• Lenzing will reassess this decision on an ongoing basis
• Intensified focus on lyocell expansion project in Prachinburi (Thailand)

Lenzing’s Managing Board concluded today to temporarily mothball the lyocell expansion project in Mobile, Alabama (USA). The rising likelihood of increasing trade tariffs, paired with the potential surge in construction costs due to the buoyant US labor market, have increased the risk profile of this project. Consequently, Lenzing will put all its effort to readjust the execution of its growth plan to meet strong market demand of its lyocell fibers. This includes an increased focus on the lyocell expansion project in Prachinburi (Thailand). Lenzing will reassess this decision on a regular basis but no substantial additional lyocell volumes, over and above the successful 25.000 tons expansion in Heiligenkreuz (Austria), will be added to the market in 2019 and 2020 by Lenzing.

Lenzing continues to be fully committed to implement its sCore TEN strategy and remains on track for the specialty expansions such as TENCEL™ Luxe filaments and LENZING™ ECOVERO™ viscose fibers, however this decision will slow down the implementation of the lyocell specialty staple fiber growth.

• Decline in revenue due to volatile standard viscose prices and currencies
• Prices for key raw materials still high
• New production line in Heiligenkreuz in start-up phase
• Backward integration into dissolving wood pulp to be strengthened via joint venture in Brazil

Lenzing – The Lenzing Group generated solid results in a challenging market environment in the first half of 2018. The decline in revenue and earnings compared with the first half of the previous year, which was the best half-year in the company’s history, was based on a mix of volatile prices for standard viscose and price increases for key raw materials, coupled with currency effects. The Lenzing Group’s strategic orientation with a focus on specialty fibers had a positive impact in this environment and is increasingly bearing fruit. The corporate strategy sCore TEN is being implemented with great discipline in order to expand the company’s offering of specialty fibers and even more extensively support customers and business partners.

Revenue declined by 6.4 percent compared with the first half of the previous year to EUR 1,075.4 mn. This decrease is primarily attributable to less favorable currency exchange rates. EBITDA (earnings before interest, tax, depreciation and amortization) decreased by 28.1 percent to EUR 194.8 mn, especially due to price increases for key raw materials and higher energy prices. The EBITDA margin fell from 23.6 percent in the first half of 2017 to 18.1 percent in the first half of 2018. EBIT (earnings before interest and tax) declined by 37 percent to EUR 128.7 mn, leading to a lower EBIT margin of 12 percent (H1 2017: 17.8 percent). The net profit for the period dropped by 39.3 percent from EUR 150.3 mn in the previous year to EUR 91.3 mn. Earnings per share equaled EUR 3.44 (H1 2017: EUR 5.55).

“So far, the financial year 2018 proved to be as challenging as expected, and market headwinds were clearly noticeable. In this market environment, we are satisfied with the solid results we report. We are proud that with our corporate strategy sCore TEN and the focus on growth with specialty fibers we show big steps in the right direction. The recently announced joint venture with Duratex is another important step in executing this corporate strategy,” says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “We will continue to implement our strategy with great discipline and are convinced that this will steadily improve the long-term profitability of Lenzing,” Doboczky adds.

Largest dissolving wood pulp line worldwide

In June, the Lenzing Group and Duratex, the largest producer of industrialized wood panels of the southern hemisphere, announced that they had agreed on the terms and conditions to form a joint venture to investigate building the largest dissolving wood pulp plant (single line concept) in the state of Minas Gerais, (Brazil). This decision supports the self-supply with dissolving wood pulp and the growth in specialty fibers, defined in Lenzing’s sCore TEN strategy. The joint venture will investigate the construction of a 450,000 t dissolving wood pulp plant, which is expected to become the largest and most competitive single line dissolving wood pulp plant in the world. The final investment decision to build the dissolving wood pulp plant is subject to the outcome of the basic engineering studies and the approval by the respective supervisory boards.

Even stronger focus on sustainable products

As a pioneer in sustainable fiber solutions, the Lenzing Group is committed to higher standards in the textile and nonwoven sectors. More than EUR 100 mn will be invested in sustainable manufacturing technologies and production facilities by 2022 in order to realize this vision. In line with the Group’s specialty strategy, another two milestones were set in the first half of 2018: Lenzing announced an investment of up to EUR 30 mn in another pilot line for the production of TENCEL™ Luxe filaments at the Lenzing site. In addition, the company also introduced the environmentally friendly process for the production of LENZING™ ECOVERO™ branded viscose fibers at its Chinese site. Both decisions contribute to better meeting the strong demand for environmentally compatible products.

Expansion of capacities

CAPEX (investments in intangible assets and property, plant and equipment) rose by 60.8 percent year-on-year to EUR 117.2 mn in the first half of 2018. This is primarily attributable to the capacity expansions in Heiligenkreuz (Austria) and Mobile, Alabama (USA) and the expansion of the existing dissolving wood pulp plant in Lenzing. The company is pressing ahead with these projects as well as with planning work on the construction of the next state-of-the-art lyocell production facility in Prachinburi (Thailand).

New brand identity

With the new positioning of its master brand and its product brands, the Lenzing Group started a new phase of branding and brand communication in the first half of 2018. Lenzing decided to carry out a new brand strategy in order to sharpen its company and product profile as a sustainable innovation leader for customers and partners along the value chain as well as for consumers. The most important pillar of this new brand strategy is a brand architecture with a focus on fewer brands and a strong message to consumers. With the TENCEL™ brand as an umbrella brand for all specialty products in the textile segment and the VEOCEL™ brand as the umbrella brand for all specialty fibers in the nonwoven segment as well as the new master brand, which was presented in March, Lenzing showcases its strengths in a targeted manner.

Outlook

The International Monetary Fund expects a further acceleration in global economic growth to 3.9 percent for 2018. However, growing protectionist tendencies in the political arena represent a source of uncertainty. Export-oriented companies in the Eurozone are faced with additional challenges from the currency environment.

Developments on the fiber markets should remain positive, but with continuing volatility. The rising demand for cotton should support prices despite the increase in production. Polyester fiber prices have stabilized after the increase in previous years.

The wood-based cellulosic fiber segment, which is relevant for Lenzing, should see further strong demand. After years of moderate capacity expansion in the viscose sector, significant additional volumes will enter the market in 2018 and 2019. As a result, standard viscose prices will remain under pressure. The Lenzing Group is very well positioned in this market environment with its corporate strategy sCore TEN and will continue its consistent focus on growth with specialty fibers.

The Lenzing Group still sees challenging market conditions for the second half of 2018. In addition to the price pressure on standard viscose, the prices of some key raw materials such as caustic soda are still at a very high level and exchange rates continue to be volatile. Our specialty fibers are expected to continue their very positive development. In this context, the Lenzing Group is satisfied with the earnings development to date, but underlines its estimate that the results for the year 2018 will be lower than the outstanding results in the last two years.

• More than EUR 100 mn investment in sustainable production technology until 2022
• Lenzing is committed to improving the textile and nonwoven industries as a leader in sustainable fiber solutions
• UN-Sustainable Development Goals as guiding principles for Lenzing’s sustainability agenda
• All Lenzing sites strive to fulfill the EU Ecolabel standard by 2022

The Lenzing Group, producer of botanic fibers from wood, expands its environmental leadership commitment. As a leader in wood-based cellulosic fibers, Lenzing has particular responsibility and ambition to help raising the bar in sustainability in the textile and nonwovens industries. To fulfill this vision, Lenzing is continuing its ambitious roadmap by investing more than EUR 100 mn in sustainable manufacturing technologies and production facilities until 2022.
 
Lenzing’s circular operating models with closed loop production processes set the standard in the industry. In order to further extend the environmental leadership, a major part of this investment will focus on closed loop production technologies for the expansion of the sulfur recovery systems. The second area of investment will be in improving the effluent treatment units. In addition, Lenzing will upgrade its energy usage to more sustainable solutions reducing its greenhouse gas emissions due to the construction of a gas boiler at its site in China. This investment strengthens Lenzing’s sustainability leadership at its Viscose facility in Nanjing.
 
The investments underline Lenzing’s commitment to the United Nations Sustainable Development Goals (SDG) as guiding principles for its sustainability agenda. One of the most significant SDGs for the company is SDG 12: Responsible production and consumption.
 
Stefan Doboczky, Chief Executive Officer, comments: “The textile and the nonwoven industries face fundamental challenges related to sustainability. Lenzing is passionate to take a leadership role in addressing this and making the world a better place. Our holistic approach to sustainability underpins this scope. The new eco-investment program is a major step forward in our ambitions.”
 
“The United Nations Sustainable Development Goals are a universal call for a sustainable economy that protects the planet and ensures prosperity and well-being for all people”, states Lenzing Chief Commercial
Officer Robert van de Kerkhof. “With our REFIBRA™ technology, Lenzing is innovating to support a more circular, bio-based economy, contributing in particular to SDG 12”, he adds.
 
With the Lenzing Group sustainability targets announced in 2018, Lenzing strives to upgrade all its production sites to the ambitious European Ecolabel standard by 2022. As a result, Lenzing is one of the first companies to commit to a global sustainability-oriented manufacturing standard.

• Fibres for automotive composites, technical textiles, hygiene and medical nonwovens
• UltraLink fibres offer sustainable system cost reduction solutions to the automotive industry
• Meralux offers improved liquid management for a dry feeling
• Stand 2034, ANEX 2018, 6-8 June, Tokyo Big Sight, Japan

Beaulieu Fibres International, the leading European polyolefin fibre supplier, marks its Asia Nonwovens Exhibition and Conference (ANEX) debut with unique products and capabilities to support innovation at a local level within the automotive and hygiene segments.

At Stand 2034, Beaulieu Fibres International demonstrates its commitment to the global market growth for automotive composites and technical textiles, as interest increases in adopting lightweight materials to reduce vehicle weight and fuel efficiency.

The company will present UltraLink bonding fibres that improve the mechanical, thermal and functional properties of the final part, allowing customers to meet OEM specific standards in a more sustainable way. They are available in both MONO and BICO technology – a first for the composites industry.

Jefrem Jennard, Global Sales Director – Industrial Fibres, comments: “Beaulieu Fibres International developed UltraLink fibres over the past two years to provide an answer to the automotive industry’s continuous strive for lower weight, lower emission, lower cost and better properties. They are being introduced in new global automotive programmes with SOP 2019-2021. We are delighted to introduce them to the Asian market at ANEX.”

At ANEX 2018, Beaulieu Fibres International also presents its platform of unique Meralux fibres offering significant improvements to the dryness of nonwoven for hygiene and medical applications. The BICO fibre has a special cross section, which enables it to provide bulk, opacity and enhanced fluid management compared to standard round fibres to nonwoven constructions. As a result, a dry feeling is achieved for the final nonwoven.

Petra Bohle-Stricker, Global Sales Director – Hygiene Fibres, comments: “As Asia Pacific heads towards becoming the largest regional tissue and hygiene market by the end of 2025  , nonwovens producers can already take advantage of the benefits of Meralux to launch new and innovative products that will grab the attention of global and local manufacturers. Visitors to our ANEX booth can experience Meralux fibres first-hand in nonwoven samples.”

Since Meralux was first launched in April 2017, the portfolio has expanded to include Meralux T and Meralux Soft. Beaulieu Fibres International is currently expanding its production programme with polyester-core (PET) BICO. In addition a pilot line for new developments is under construction. Both are expected to come on stream in 2018.

• Market success above expectations
• Product and market development accelerated
• Investment up to EUR 30 mn

Lenzing – The Lenzing Group is setting another milestone as a specialist for extremely high-quality products made of the renewable raw material wood. Capacities will be significantly expanded due to strong demand for Lenzing’s TENCELTM Luxe filament yarn which was first launched on the market just a few months ago. Lenzing will invest up to EUR 30 mn in a further pilot line at the Lenzing site. Basic engineering for construction of the new facility has already been initiated.

“Thanks to TENCELTM Luxe, Lenzing is currently positioning itself in the premium luxury market and is embedding the issue of sustainability there in combination with superior aesthetics”, says Robert van de Kerkhof, Chief Commercial Officer of the Lenzing Group. “The fine filament yarn is comparable to natural silk due to its airy feeling on the skin and the matte finish. It is perfectly suited for very fine fabrics made exclusively from this yarn and as a blending partner with silk, cashmere and wool”, he adds.

“On the occasion of the launch of TENCELTM Luxe filaments, the luxury brands already realized what opportunities they would have by using this yarn made of the renewable raw material wood. For this reason, demand is already so high that we have decided to take an intermediate step to expand capacities before building a large commercial production plant. The decision to construct a new line will serve as the basis for generating a three-fold increase in capacity compared to the previous volume. The additional capacity will be available to customers at the end of next year”, states Stefan Doboczky, Chief Executive Officer and Chairman of the Management Board of the Lenzing Group. “The Lenzing site was selected because research and technological know-how in plant construction are connected in a special way, which will in turn enable us to further develop this special product”, Doboczky adds.

The new capacities will enable Lenzing to more effectively fulfil the needs of customers for TENCELTM Luxe filament yarn than in the past. At the same time, Lenzing will press ahead with technical planning for a large-scale commercial line at the Lenzing site.

This strong level of demand is further evidence of the Lenzing Group’s innovative strength. The yarn is opening up new markets for the company in the eco-couture segment, thus contributing to the successful implementation of the sCore TEN strategy.

CHOMARAT, the composite reinforcement specialist, has developed a new unidirectional woven tape for its C-TAPETM line of products. Designed to meet the standards of industrial production, the new C-TAPE™ is reinforcing the foils of the “Figaro Beneteau 3”. These appendages improve the monohull’s stability and performance.

“For the series production of the foils, the Beneteau Group chose MULTIPLAST, the well-known builder of racing boats, which engaged the CHOMARAT Group to provide project support and achieve the best cost/performance balance,” explains Vincent CHOLVY, CHOMARAT’s Manager for the boating market.

C-TAPE™, a high-performance carbon reinforcement with great design flexibility
C-TAPETM offers a lot of flexibility in terms of weight, width and construction. It has been optimized to facilitate series production, yet provide the foils with maximum performance.
The weft yarn developed by CHOMARAT makes the tape easy to handle and to work with. It is produced in 50-cm widths in order to adapt better to the mould, thus reducing both scrap and production cost.

“The project was an ambitious one,” says MULTIPLAST General Manager Yann PENFORNIS. “We had to reach a lower target cost, achieve a perfect foil shape, guarantee identical weight for all parts, and produce a set of foils per week over a period of one year.”

A reinforcement that facilitates flow in multi-ply carbon structures
Fifty plies of tape are used to make the foil so that it can resist high levels of stress and achieve optimal performance.
The specific structure of C-TAPETM facilitates resin flow throughout the thickness. The reinforcement provides the desired mechanical performance and also cuts down on production time.
The result is an ultra-innovative foil, both for its geometry and for the fabrication process (infu-jection) used.

“This new C-TAPE™ is the fruit of close co-operation between the MULTIPLAST and CHOMARAT development teams, and it rounds out our broad range of tapes. We are working on different fibres and adapting the widths to our customers’ processes in order to reduce costs,” concludes Vincent CHOLVY.

By the end of summer 2018, some one hundred foils will have been produced for assembly on the first 50 “Figaro Beneteau 3” monohulls.

• JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

“JEC Group supports innovation. In 1998, it created the first award dedicated to composites, as a way to promote and reward the sector’s champions. Thanks to the work of JEC Group’s teams, the program has become an international benchmark. Each year, we receive more than a hundred applications from all over the world. Selection is now based on criteria like the level of involvement of the innovation’s partners in the value chain, the technical nature of the innovation, or its commercial applications,” explains JEC Group President & CEO Frédérique Mutel.
A new feature this year is that the jury revealed the winners during the ceremony, and the public could choose their favorite innovation before, during, and after the ceremony. So there is still time to vote! Votes are opened until Thursday March 8th, 5pm http://innovationawards.jec-world.events
Did you miss the ceremony?

11 AWARD WINNERS:
AEROSPACE APPLICATION
Winner:
AeroComposit, JSC (Russia) and its partner Solvay (United Kingdom)

• Infusion technology for an aircraft wing

The use of infusion technology to manufacture primary structural components for an aircraft wing. The technology makes it possible to create extra-long, integrated composite structures with complex aerodynamic shapes.

AEROSPACE PROCESS 
2 tied winners!
Winner: Airbus (Germany) and its partners, BMW Group (Germany), Technical University of Munich (TUM) (Germany), Neue Materialien Bayreuth GmbH (Germany), Werkzeugbau Siegfried Hofmann GmbH (Germany), BASF SE (Germany), Foldcore GmbH (Germany), Neenah Filtration (Germany) and SGL Carbon GmbH (Germany)

• Complex structural applications for MAI sandwich technology

Cost-effective production of a complex 2.5D structure made of thermoplastic composite sandwich, with very short cycle times: under 5 minutes for aerospace materials and 2.5 minutes for automotive materials.

Winner: M. Torres Diseños Industriales SAU (Spain)
Moldless process to manufacture one-piece parts
A new manufacturing process for oversized one-piece reinforced composite structures, without requiring the use of complete molds.

AUTOMOTIVE APPLICATION
Winner: Ford Werke GmbH (Germany) and its partners, Gestamp (United Kingdom), GRM Consulting (United Kingdom) and University of Warwick (United Kingdom)

• Lightweight composite automotive suspension part

Structural suspension part made of lightweight composite, using a brand-new patented process for prepreg/SMC/steel overmolding that was designed using a new computer-aided engineering (CAE) technology.

AUTOMOTIVE PROCESS
Winner: Audi AG (Germany) and its partners, Voith Composites GmbH & Co. KG (Germany), Dow Automotive (Switzerland), and Zoltek Corp. (United States)

• Series production of a rear panel module made of carbon composite

For the first time, the potential of carbon fiber reinforced plastics (CFRP) is used to full advantage in series production with a new rear panel module and cost-effective production technologies.

CONSTRUCTION & INFRASTRUCTURE
Winner: Komatsu Seiren Co., Ltd. (Japan) and its partners, Kanazawa Institute of Technology (Japan) and Nagase ChemteX Corporation (Japan)

• Cabkoma cable made of CFRTP

Komatsu Seiren has developed a cable made of molded carbon fiber reinforced thermoplastic (CFRTP), using a very cost-effective process that consists in polymerizing a thermoplastic epoxy resin in situ.

MARINE
Winner: Uljanik JSC (Croatia)

• Composite cargo decks for a vehicle carrier

On the SIEM Cicero, a vehicle carrier with a capacity of 7,000 vehicles, glass-fiber reinforced composites are used for a number of the structures for the cargo decks, thereby considerably reducing the ship’s weight, fuel consumption and CO2 emissions.

RAILWAY
Winner: ELG Carbon Fibre Ltd. (United Kingdom) and its partners, Alstom Transport (United Kingdom), Magma Structures (United Kingdom), the University of Birmingham (United Kingdom), and the University of Huddersfield (United Kingdom)

• A bogie frame made of optimized lightweight carbon fiber

This project has developed the very first carbon-fiber bogie frame that uses a recycled material, making it possible to overcome the obstacles to a commercial adoption of this type of structure.

SPORTS & LEISURE
Winner: BMW Group (Germany) and its partners EDAG Engineering GmbH (Germany), KraussMaffei Technologies GmbH (Germany), Chr. Karl Siebenwurst GmbH & Co. KG (Germany), TUM-LCC (Germany), Automation W + R GmbH (Germany), and FHG-IGCV (Germany)

• A modular construction system for the rear swing arm suspension of a motorcycle

A modular system to produce a complex-shape swing arm suspension reinforced with carbon fiber. The system can adjust the mechanical properties on a case-by-case basis, for a competitive cost and weight compared to metal solutions.

SMART CITIES
Winner: MC Materiales Compuestos (Argentina) and its partners, Plaquimet (Argentina), Purcom (Brazil), IS Groupe - Composite Integrity (France), and G12 Innovation (Brazil)

• The Wet Core Pod composite housing module

The Wet Core Pod is a composite housing module with an industrialization potential that can facilitate the most complex, costly and difficult step in a construction project.

SUSTAINABLE DEVELOPMENT
Winner: Cetim-Cermat (France) and its partner, CETIM (France)

• “3-in-1” line for producing recycled composites

A modular line that uses an innovative thermomechanical process to make large panels from recycled composites or plastics. The panels are then thermoformed into parts.
 

At the upcoming ISPO exhibition, SITIP are pleased to introduce BEHOT, a SITIP Heat Generating Technology for fabrics that has been licensed from the unique ROICA™ StretchEnergy™ System by Asahi Kasei and is already adopted by Santini that is offering Premium cycle wear Made in Italy since 1965.

SITIP is a leading Italian textile company specialized in high-tech and function-rich innovations for sport, technical underwear, shapewear, beachwear, footwear components, protective helmets, and in particular Velcro-receptive fabrics for mechanical fastening systems and a number of innovative technical fabrics for other industrial end-uses, all made through key manufacture technologies that include weft & warp knit fabric innovations.

Further, SITIP has more recently launched 16 unique trade brands, each one specialized in highly advanced innovation solutions designed to fit both market and the discerning needs of the contemporary consumer.

Santini is offering to the market a multi-panel thermal bib tight for the coldest winter training. Made with the special BeHot fabric by Sitip, constructed with the ROICA™ StretchEnergy™ active performance material, it not only insulates, but generates up to 2 degrees of heat as you workout as certified by CeRism, Outdoor Sport Research Centre at Verona University. Complete comfort and protection thanks to the Acquazero by Sitip treatment that ensures you stay dry even in the most challenging conditions.

The design is completed with breathable mesh braces for added comfort and a reflective pixel detail on the leg to improve visibility in low light conditions. BeHOT represents a special combination of a highly refined type of knitted construction combined with this unique ROICA™ Premium Stretch yarn function, and has been especially developed for this new high-function concept.

The AZL will continue its collaboration on composites in buildings and infrastructure after completing an initial market and technology study which identified new potentials for composite technologies in buildings and infrastructure markets. The aim of the new AZL Workgroup which will meet for the first time on January 25th, 2018 is to jointly develop new applications and to support the business development for composites in these two growing markets. The meeting is open to interested companies from the composite industry as well as the building and infrastructure markets.

The aim of the initial workgroup meeting will be to turn insights from the study into a long-term workgroup collaboration and to define topics and initiatives for the joint cooperation in the field of process and manufacturing technologies, fire safety regulations, materials as well as standards and norms. Industrial keynote presentations will introduce these action fields and will provide an insight into building and infrastructure applications for composites. The meeting will furthermore provide a platform to network with companies along the entire composite value chain.

Dr. Amer Affan, CEO and founder of AFFAN Innovative Structures based in Dubai is in charge of various composite projects for buildings such as the Museum of the Future in Dubai: “We have been utilizing structural composites in construction since 2010. Composites is a truly high-tech material compared with the traditional building materials (steel, concrete, timber and aluminum) but it is still to be recognized as such in the conservative and price-sensitive building industry. AZL, particularly its location at the RWTH Aachen University and its partner companies, offers a good platform to progress the use of composites in construction.”

AZL together with more than 25 companies just completed the Joint Market and Technology Study on “New Potentials for Composite Technologies in Buildings and Infrastructure” establishing a broad knowledge on business opportunities for composite technologies in these two growing markets. In a structured approach, the study determined the key segments as well as the technologies/applications with the highest market and technological potential. Analyses of 20 market segments, investigation of 438 applications, technology analyses of 25 highlight components and 11 detailed business cases were elaborated throughout the study. Additional to requirement analyses for materials and production technologies, new concepts for efficient profitable production technologies and cost engineering analysis were developed. With the workgroup, the AZL will take this initiative a step further with the aim to build a long-term cooperation platform for composites in buildings and infrastructure markets.

Justin Jin, CEO of the Korean company AXIA Materials participated in the study and is part of the AZL Partner Network: “As producer of large thermoplastic composite sheets and composite SIP (Structural Insulated Panel), we are eager to drive composites in B&I applications with the best efficient way. The AZL study on Buildings and Infrastructure provided us a great networking with key players in this business field and opportunities to strengthen our products with the key elements from partners. The study also gave us a proper market understanding including market size/volume in numbers to prove the value of this technology to building industry. We are looking forward to following up on these first insights and to realize applications with the AZL and its partners.”

Besides the networking options, the meeting will offer the opportunity to get an insight into the activities of the AZL Network consisting of nine research institutes at the RWTH Aachen Campus and more than 80 companies from 21 countries. During an optional guided tour, participants will visit selected institutes at the RWTH Aachen Campus. The meeting is open to all interested companies and free of charge.

More Information on Meeting and the Study
Information on AZL activities in the field of buildings and infrastructure:
www.azl-lightweight-production.com/composites-buildings-infrastructure
Details and registration to first Workgroup Meeting on January 25th, 2018:
http://www.azl-lightweight-production.com/termine/1st-workgroup-meeting-buildings-infrastructure

At the “Future of Composites in Construction” trade show, CHOMARAT and ALTUS GROUP are presenting CarbonCast®, their flagship line of reinforced-concrete prefabricated wall panels, reinforced with CHOMARAT’s C-GRID® carbon-fiber grids. A recent army-hospital project in Greenville, South Carolina is another success story of this innovative product: 18,600 m² (200,000 sq.ft) of precast insulated panels were installed in record time. Come and learn more about it at the McCormick Place Lakeside Center, Chicago, Stand C 10, on 20-22 June 2017.
“Reducing installation time, improving the fire and safety performance, increasing the service life of structures, and cutting energy consumption are crucial criteria in the choice of a CarbonCast solution,” explains ALTUS GROUP Executive Director John CARSON. CarbonCast® panels are classified ASHRAE 90.1. Thanks to the low thermal conductivity of carbon fiber, C-GRID® reinforced panels offer excellent thermal performance, providing uniform insulation and, therefore, a comfortable, energy-efficient building.