From the Sector

Asia’s leading international trade fair for home and contract textiles returns for its 27th edition next month, offering suppliers and buyers a much needed boost with physical and virtual participation options. Buyers around the world can source from over 800 exhibitors both during the 25 – 27 August show period and online after the fair.

Intertextile Shanghai Home Textiles – Autumn Edition will open next month following successful in-person editions last August and this March. This year the fair will be held concurrently with Intertextile Shanghai Apparel Fabrics, Yarn Expo Autumn, PH Value and CHIC at the National Exhibition and Convention Center.

To better cater to the needs of those who cannot travel to Shanghai, last year’s online buyer service returns again in 2021. Livestream presentations specific to product categories will be conducted each day of the fair, with online buyers able to communicate dynamically with the exhibitors, or follow up with them after the fair. An online matching programme will also be offered again, with buyers able to arrange virtual meetings with their desired exhibitors during and after the fair. For those buyers able to attend the fair in-person, a VIP buyer programme a free business matching service is offered.

Intertextile Shanghai Home Textiles – Autumn Edition 2021 will be held concurrently with Intertextile Shanghai Apparel Fabrics – Autumn Edition, Yarn Expo Autumn, PH Value and CHIC at the National Exhibition and Convention Center. Intertextile Shanghai Home Textiles – Autumn Edition is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

The PERFORMANCE DAYS summer edition took place as a Digital Fair Week from May 17 to 21, 2021. By extending the event to an entire week of the fair, the PERFORMANCE DAYS team, in cooperation with the Functional Fabric Fair by PERFORMANCE DAYS, was able to provide even more opportunities for intensive networking and interactive exchange for industry insiders to catch up on the latest innovations and participate in exciting expert talks, supplier workshops and panel discussions.

Informative, innovative and international: new sourcing platform THE LOOP
The Digital Fair Week was introduced for the first time at the summer edition as part of PERFORMANCE DAYS LOOPS. The sourcing platform was launched in the first half of 2021 together with US Partner Functional Fabric Fair by PERFORMANCE DAYS. With much success, as proven by the great enthusiasm shown by exhibitors, trade fair visitors and fabric manufacturers. The MARKETPLACE area, which showcased some 10.000 products and around 400 curated, sustainable fabrics and accessories from more than 170 international exhibitors, enjoyed particular popularity as part of the Digital Fair.

Another extremely popular and particularly well-attended attraction was the 3D FORUM, which tested hand-selected fabrics for their material properties as part of the digital fair week, to be visualized ultimately as a 3D scan.
Also for the spring/summer 2023 season, the jury presented two awards for outstanding fabrics – so in addition to the presentation of the PERFORMANCE AWARD, won by Trenchant Textiles, the ECO PERFORMANCE AWARD was presented to the winner, Utenos Trikotazas.

Professional, versatile and informative: Program with Expert Talks
A total of 17 live talks from 30+ speakers followed by a question-and-answer session, under the guidance of moderator and freelancer Astrid Schlüchter, formed the basis of the digital fair supporting program from May 17 to 19. All talks, webinars and panel discussions are available on demand via THE LOOP platform.

The PERFORMANCE DAYS Team has once again succeeded in providing the industry with an almost real trade fair experience despite being held digitally. Via the Digital Fair Platform, which was activated explicitly for the trade fair week, trade fair visitors can enter into interactive exchange, including matchmaking and networking activities.

The premiere of the Functional Textiles Shanghai by PERFORMANCE DAYS fair takes place in Shanghai in September 28-29 as well as in Portland in October 27-28, 2021, with the planned hybrid event in Munich scheduled for December 1 and 2, 2021.

• Showroom für erstklassiges Schiffsinterieur

Emsdetten, Deutschland / Miami, Florida, USA ● Aufgrund der Corona-Pandemie fallen weltweit Messen aus. Damit Entscheider aus der Kreuzfahrtbranche sich trotzdem über innovative Neuheiten informieren können, eröffnet Shores Global, führender Möbellieferant für Kreuzfahrtschiffe, im Januar 2021 die Innovation Lounge in Miami. In verschiedenen Umgebungen lassen sich Erfindergeist, Nachhaltigkeit und Kreativität für das Gastgewerbe an Land und auf See erleben. Mit an Bord: Der Emsdettener Textilhersteller drapilux.

Suite, Bar, Balkon, Empfangsbereich – die Miami Innovation Lounge wartet mit verschiedenen vollausgestatteten Räumen auf, in denen Besucher die Produkte in authentischen Umgebungen erleben können. Anbieter aus der gesamten Innenausstattungsbranche, von hochwertigen Textilien bis hin zur Virenschutztechnologie, präsentieren Lösungen für eine nachhaltige, erstklassige Innenausstattung. Federführend verantwortlich für die Gestaltung des Innovationserlebnisses sind die Schiffsdesign-Experten von Tillberg Design of Sweden. „Wir freuen uns sehr, dass drapilux von Tillberg für den Showroom ausgewählt wurde. Es zeigt, dass wir mit unseren Designs und Innovationen den Nerv der Zeit in der Kreuzfahrtbranche treffen“, sagt Jérémie Chauvet, Sales Manager Maritim bei drapilux.

drapilux Stoffe vereinen Design und Funktion
Bereits seit über zehn Jahren fertigt drapilux Stoffe für den maritimen Sektor. Insgesamt 119 Vorhänge und 17 Möbelstoffe des Textilherstellers sind nach der „Marine Equipment Directive (MED)“ zertifiziert. Grundlage für die Gesetzgebung bildet die Resolution der IMO (International Maritime Organisation) zum Schutz des menschlichen Lebens auf See. Das Portfolio reicht vom edlen Uni bis hin zu modernen gemusterten Artikeln. Da drapilux zusätzlich zur MED-Zertifizierung noch eine sogenannte US-Coast Guard Zulassung besitzt, sind die Zertifikate weltweit anerkannt und die Textilien können problemlos auf allen Schiffen eingesetzt werden.

Im Showroom in Miami ist das Emsdettener Unternehmen mit fünf verschiedenen Stoffen in vier Räumen vertreten. Am Empfang hängt drapilux 135 45. In klassischem Blau verleiht der blickdichte Faux-Uni dem Raum Ruhe und Eleganz. In der Luxuskabine bilden drapilux 262 17 in Beige und drapilux 755 60 in Violett ein harmonisches Duo vor dem Fenster. Der Dimout drapilux 262 17 aus der Boutique-Kollektion sorgt für eine angenehme Nachtruhe, während der transparente drapilux 755 60 die Kabine tagsüber in zarte, farbige Schleier hüllt. drapilux 808 38 in dunklem Grau zeichnet einen beruhigenden Kontrast in der Bar. Ausgestattet mit der intelligenten Zusatzfunktion drapilux air trägt er zudem zu einer besseren Raumluft bei. Metallsalze in den Fasern brechen die Geruchsmoleküle auf und wandeln diese in unbedenkliches Kohlenstoffdioxid und Wasser um. So werden schlechte Gerüche permanent abgebaut.

Der fünfte Stoff ist im Gesundheitszentrum zu finden: drapilux 191 45 aus der we care-Kollektion. Die unifarbenen Randbereiche in Blau und Grün vermitteln Ruhe, während die vielfarbigen Streifen in der Mitte die Fantasie anregen und eine gute Kombinationsmöglichkeit zu Boden, Wand und Möbeln bieten. Zudem kann der Stoff mit intelligenten Zusatzfunktionen drapilux bioaktiv oder drapilux antimicrobial ausgestattet werden und so zu einem gesunden Raumklima beitragen. Dank Silberionen auf der Faser ist drapilux bioaktiv antibakteriell und beugt so Krankenhausinfektionen vor. drapilux antimicrobial wirkt nicht nur gegen Bakterien auf der Stoffoberfläche, sondern auch gegen Viren, Pilze und Hefepilze. Durch beide Zusatzfunktionen können Textilien einen wertvollen Beitrag zur Hygienekette leisten.

Corona-konformes Messeerlebnis
Im Einklang mit den Richtlinien zur Eindämmung der Corona-Pandemie des US-amerikanischen Center for Disease Control (CDC) hat Shores Global ein Konzept entwickelt, um die Produkte sicher zu präsentieren. Die Innovation Lounge wird vor Ort eingerichtet und kann unter Einhaltung des Infektionsschutzes besichtigt werden. Zusätzlich gibt es ein breites digitales Angebot mit Führungen, Live-Streams und Webinaren für alle, die nicht persönlich teilnehmen können. drapilux wird an allen Events online und offline mitwirken. „Im Wesentlichen schaffen wir einen langfristigen Kongress, auf dem führende Anbieter ihre Produkte präsentieren können und die Entscheider der Kreuzfahrt- und Hotelbranche einen einzigen Zugang zu allen notwendigen Einrichtungslösungen haben“, fasst Susan Sadolin, CEO von Shores Global, zusammen. Jérémie Chauvet ergänzt: „In diesen außergewöhnlichen Zeiten ist der Showroom eine großartige Möglichkeit, unsere Produkte in den USA im Herzen der Kreuzfahrtbranche zu präsentieren. Als Sales Manager Maritim freue ich mich sehr auf die spannenden Erfahrungen der nächsten Monate!“

Die Innovation Lounge ist seit Ende Januar für die Öffentlichkeit zugänglich.

drapilux präsentiert Neuheiten auf der Heimtextil in Halle 8 an Stand C56

Natürliche Farben, Webkunstwerke und technische Neuerungen: Auf der internationalen Fachmesse für Wohn- und Objekttextilien Heimtextil 2020 präsentiert drapilux innovative Neuheiten. Dazu gehören Stoffe aus einem neuartigen Garn mit Recycling-Anteil, Blackouts sowie drei transparente Artikel. Zusätzlich wartet das Emsdettener Unternehmen mit einer echten Überraschung auf: Als Reminiszenz an die Textilkünstlerinnen der Bauhaus-Epoche haben die drapilux-Designer eine Sonderedition von Dekostoffen kreiert, deren Charakteristik an die Designsprache des Bauhauses erinnert.

At home, at work, on the street, in the sky, on the water, even in space, technical textiles and nonwovens are swinging towards ever higher performances in amazing applications. Versatile and light, but sometimes stronger than metal, these materials of the future gain their superpowers from the interaction of precisely coordinated textile systems. At Techtextil in Frankfurt am Main from May 14 to 17, 2019 in Hall 3, B06, Oerlikon will be showing chemical fiber applications made of polyester, polypropylene and Co. and what they can do in these fields. However, these exhibits are only a communicative means to an end, as Oerlikon is primarily interested in placing the associated machinery and plant solutions at the centre of discussions with trade fair visitors.

More than two thirds of all technical innovations are directly or indirectly based on new materials, says the German Research Ministry. One could add: The key to a more advanced world, for technological products with amazing functions, breathtaking performance and greater environmental benefits, is also to improve the properties and processing of materials. This applies first and foremost to textiles. Probably no other fabric is so strong as a "team player" who draws its strength from its cohesion. A single polyester thread, for example, looks inconspicuous. Processed into a thigh-thick special weave, however, high-strength High Modulus/High Tenacity fibers anchor floating oil platforms in the deepest waters. These kilometer-long "Mooring Ropes" withstand a breaking load of well over 1,000 tons and perform their task better than steel. For decades, Oerlikon Barmag has been offering special solutions for the production of so-called industrial yarns (IDY) that are tailored to customers worldwide. "We will once again be presenting numerous innovations at this trade fair to inspire our customers," explains Dr.-Ing. Dipl.-Chem. Roy Dolmans, Technology Manager IDY and R&D Filament Processing.

China is the world’s undisputed front-runner in the global car market, leading the way in both production and sales. 2018 saw 27.8 million vehicles produced and domestic sales of 28.1 million, and while these numbers were down slightly year-on-year, the opportunities for global textile producers are still unrivalled given the overall size of the market. These opportunities can best be explored at this year’s biennial China International Nonwovens Expo & Forum (CINE – supported by Techtextil), which runs from 3 – 5 June in Shanghai.
While CINE features nonwovens & nonwoven products, machinery for nonwovens and raw materials & chemicals for nonwovens for a wide range of applications, it is the potential in the automotive sector that is generating a lot of talk before this June’s event. And considering only around 50% of demand for automotive textiles is met by domestic output, the opportunities for imports from overseas suppliers is high.

While new car sales in China dropped for the first time last year since 1992, production still reached 27.8 million vehicles, including 23.5 million passenger cars and 4.3 million commercial vehicles. Furthermore, strong growth is still evident in new energy vehicle (NEV) sales, as well as exports of all vehicle types. NEV production totalled 1.27 million units last year, a staggering 60% increase, while sales grew by nearly 62%. More e-vehicles are sold in China than rest of the world combined, while the government recently set a target of selling 7 million e-vehicles by 2025, ensuring growth in this sector will remain robust for some time. Exports of all vehicle types in 2018 did not grow as fast as NEVs, but the 1.04 million vehicles produced for overseas markets last year still represented growth of 16.8%.

Premium automotive industry buyers attend CINE
Given CINE’s strong reputation in the Chinese nonwovens sector, a number of leading automobile brands, and textile suppliers to these companies, source at the fair. Previous buyers have included Autoliv, Honeywell, Johnson Controls, Lear Corporation, Lydall, Toyota Boshoku, Volkswagen, Wangbo Co Ltd and more.

This edition, buyers such as these can source from a range of automotive nonwovens suppliers. This includes Shanghai Shenda, one of the country’s largest producer of automotive textiles, who will group together a number of automotive interior suppliers.

This year the fair will take place in a new venue, the Shanghai Convention & Exhibition Center of International Sourcing, located conveniently between Hongqiao airport and downtown Shanghai. Visitor registration for the fair is now open and can be accessed here: http://vis.eastfair.com/CINEPCEN/reg.aspx.

• Textile Intelligenz made in Germany – Messehighlight: zukunftsweisender Cabrioverdeckstoff

Von intelligenten Geweben für Automotive, Aircraft und Rail, über Absorber bis hin zu Outdoor-Textilien: Schmitz Textiles, Tochtergesellschaft der Schmitz-Werke GmbH + Co. KG, präsentiert auf der Techtextil und Texprocess 2019 umfassende textile Kompetenz. Diese zeigt sich in den Produkten der drei Marken mobiltex, drapilux und swela.

Der Spezialist für die textile Ausstattung in den Bereichen Automobil, Nutzfahrzeuge, Eisenbahn, Luftfahrt, Industrie und Verkehr mobiltex stellt erstmals auf der Messe einen völlig neuen Cabrioverdeckstoff vor. Ebenfalls in dieser Form neu auf dem Markt sind die textilen akustischen Lösungen von drapilux. swela, eine der führenden Marken für Sonnenschutz-Textilien, Outdoor-Bezugsstoffe und maritime Stoffe, zeigt fünf Innovationen in großer Farbauswahl. Besonderheit der qualitativ hochwertigen Textilien aller drei Marken sind ihre mechanischen und intelligenten Funktionen sowie ihre Schutzeigenschaften.

Highlight ist ein völlig neuer Cabrioverdeckstoff: mobiltex 388. Das Produkt hat signifikant weniger „White Marks“, Knickfalten, Krähenfüße, Fadenverschiebungen und Einfallstellen als vergleichbare Stoffe. Die Entwicklung individueller Varianten und Produktion erfolgen – wie auch bei den anderen Marken des Unternehmens – am Standort Emsdetten. Hier können auch kleinere Mengen für Sondereditionen hergestellt werden. Das schafft Designvielfalt.

Die Techtextil und die Texprocess finden vom 14. bis 17. Mai 2019 in Frankfurt am Main statt. Schmitz Textiles ist in Halle 3.0/G67 zu finden.

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

China is the world's largest producer and exporter of nonwoven fabrics, as well as having the largest consumer market for products made from nonwovens, making the upcoming biennial China International Nonwovens Expo & Forum (CINE – supported by Techtextil) the place to be for industry players from 3 – 5 June. This year’s event will relocate to a different venue, the Shanghai Convention & Exhibition Center of International Sourcing, located conveniently between Hongqiao airport and downtown Shanghai.

“The nonwovens market has been one of the fastest growing sectors of the Chinese textile industry over the last decade, and we expect this to continue in the coming years,” Wendy Wen, Senior General Manager of the fair’s co-organiser, Messe Frankfurt (HK) Ltd, commented. “The demographic changes, evolution of the manufacturing sector and greater awareness of environmental protection that have driven growth in China, among other factors, are also evident in a number of markets in the region, particularly Southeast Asia, so we anticipate production growth will remain strong to meet export demand, even if the Chinese economy slows further.”

Reports by the China Nonwovens & Industrial Textiles Association (CNITA), the Freedonia Group and Smithers Pira support this. Nonwovens output in China grew year-on-year by 9.67% for the first 11 months of 2018, exceeding the corresponding figure for 2017 of 8.71%, while demand for nonwovens is predicted to reach 4.9 million metric tons in 2022, a 6.9% per year increase over this period.

Turning to the region, in 2015 Asia occupied 43.1% of the global nonwovens market – with China alone accounting for more than half of the share – with this figure expected to increase to 47.1% in 2020. The Freedonia report also notes that healthy growth in markets nearby to China such as India, Indonesia, Malaysia, the Philippines and Vietnam will also fuel nonwovens output in the country to meet export demand.

Globally, nonwovens demand is expected to increase 4.4% per year to 12.2 million metric tons in 2022, with developing regions being the main driver of this, in particular within Asia-Pacific. In the PP nonwovens sector, output is predicted to nearly double between 2013 and 2020, with the major drivers of this growth being baby diaper, adult incontinence and feminine hygiene products. In the durable nonwovens sector, annual growth of 6 to 7% for the period 2017 – 2023 is also anticipated for filtration, engineering construction and packaging uses.

Cinte Techtextil China opens its doors next week, with around 480 exhibitors from 22 countries and regions preparing for another successful showcase of the world’s leading textile innovations. Leading international and domestic brands will feature in halls N1 – N3 at Shanghai New International Expo Centre from 4 – 6 September, making Cinte Techtextil the ideal place to make connections and gain insight into Chinese and Asian market trends.

The technical textile industry in the Asia region, and China in particular, has been growing steadily and is predicted to continue doing so. China’s total output of technical textiles and nonwoven products is estimated to account for 30% of global production by 2020, and double that of 2013. This high potential for growth, achieved through investments worth billions of dollars, has drawn attention from European exhibitors, who are set to travel to the region for Cinte Techtextil.

This year’s European Zone will feature around 30 exhibitors from countries including Austria, France, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, Germany and Italy. In addition to this, the Czech Republic will present its debut pavilion, showcasing exhibitors with solutions for technical yarn, fabric processing and nonwoven fabrics.

In addition to this, exhibitors from 12 more countries and regions will present their latest innovations to the market. These include domestic and international exhibitors from China, Hong Kong, India, Indonesia, Israel, Japan, Korea, Saudi Arabia, Taiwan, Thailand, Turkey and the US.

Belt and Road: a success story for Buildtech
Following higher regulations and quality standards that aim to exceed Western levels, demand is high in China for production machinery. What’s more, with the national nonwovens market displaying particularly fast growth, Cinte Techtextil has attracted some of the world’s leading nonwoven and weaving machinery brands.

The fair will showcase leading global exhibitors across 12 application areas. Two areas to watch out for include Buildtech and Mobiltech, which are both performing well in Asia and specifically in China. The Belt and Road initiative brings Buildtech a great deal of benefits through China’s enormous investments in global infrastructure. Adding to this, China’s automobile production has been increasing 3% year-on-year, with particularly high growth seen in new-energy vehicles, SUVs and commercial vehicles. China has become the world’s largest auto producer, and this has been boosting progress in the Mobiltech category.

Cinte Techtextil fringe programme a hub of industry insight
A comprehensive fringe programme will keep Cinte Techtextil fairgoers up to date with industry news, with standout events including the 7th China International Nonwovens Conference. Focusing on the global nonwovens industry, topic highlights include the latest innovations in China’s nonwovens industry, an insight into the North American nonwovens market, future trends in the global hygiene product market, and more. The conference will also discuss innovations and developments in filter materials and the wipe industry.

The first day of the fringe programme will see a panel discussion in hall N1, moderated by the Taiwan Technical Textiles Association (TTTA), with confirmed panellists including DuPont, IBENA Textilwerke and SGS-CSTC Standards Technical Services. The panel will focus on current trends, developments and standards in the protective textile industry.

Other fringe programme events will include seminars and product presentations led by industry leaders on the latest global technologies and market trends, and an Innovation Showcase Area in a variety of application categories.