From the Sector

Nur noch einen Monat, bevor die INDEX™20 zum ersten Mal seit 2017 ihre Tore öffnet, und rund 750 Aussteller haben ihre Teilnahme bereits bestätigt. Dies übersteigt die Zahlen von 2017 und zeigt deutlich die Relevanz der INDEX™20 als Anlaufstelle für Informationen aus erster Hand über neue Entwicklungen in den Bereichen Filtration, Transport, Bau, Hygiene, Medizin und Verpackung.  Wie immer wird es eine große Bandbreite an Endanwendungen geben, darunter langlebige Anwendungen und Einweganwendungen.

Trotz der Herausforderungen, mit denen viele Sektoren konfrontiert sind, haben sich die Vliesstoffe weiterentwickelt und sind während der Coronavirus-Pandemie noch stärker in den Vordergrund getreten. In einer solchen Zeit ist eine Veranstaltung wie INDEX™ wichtiger denn je, nicht nur um weiteres Wachstum zu gewährleisten, sondern auch um den Beitrag von Vliesstoffen im Kampf gegen die Pandemie zu unterstreichen und zu feiern. Um sicherzustellen, dass jeder die Veranstaltung unbesorgt genießen kann, werden alle erforderlichen Gesundheitsprotokolle zum Schutz der Aussteller und Besucher vorhanden sein.  

Natürlich ist die Pandemie nicht die einzige Herausforderung, mit der die Welt heute konfrontiert ist, und viele der Möglichkeiten zur Lösung einiger der wichtigsten Probleme wie Luftqualität, Kosteneffizienz, Nachhaltigkeit und Bereitstellung von sauberem Trinkwasser werden ebenfalls angeboten. In der Tat erleben wir weltweit einen Anstieg der Investitionen in erneuerbare, recycelte Materialien und die Entwicklung von Recyclingtechniken für Vliesstoffprodukte in einer Reihe von Anwendungen, während gleichzeitig eine Reduzierung des Materialeinsatzes, der Energie und der Abfallproduktion gewährleistet wird.

Eine Neuheit in diesem Jahr ist das INDEX™ Innovation Lab, das zum ersten Mal geöffnet sein wird. Das Innovation Lab ist ein spezieller Bereich innerhalb der INDEX™20, in dem Innovation und F&E präsentiert werden. Es ermöglicht die Entdeckung der wichtigsten Eigenschaften und Funktionen von Vliesstoffen in verschiedenen Anwendungen und verbessert das Verständnis für ihr Potenzial. Es werden sogar Poster von einigen der klügsten Köpfe der Branche ausgestellt, die aktuelle, noch laufende Forschungsprojekte sowie die Gewinner und Nominierten der INDEX™20 Innovation Awards vorstellen. Das Innovationslabor wird auch einen "Rundgang" durch das tägliche Leben mit Vliesstoffen bieten, der die breite Palette von Anwendungen und die wachsende Zahl von Sektoren, die von Vliesstoffen berührt werden, präsentiert.

Die sechs kostenlosen Branchenseminare finden parallel zu The Lab statt und bieten Expertenwissen zu den Themen Transport, Filtration, Infektionsprävention, intelligente Vliesstoffe und Geokunststoffe. Jedes Seminar findet live in Genf und parallel dazu auf der virtuellen Plattform statt, wo alle Teilnehmer mit den Referenten interagieren und an Diskussionen und Fragerunden teilnehmen können.

Hexcel, a global leader in advanced composites technologies, announces the successful maiden flight of a lightweight camera drone, developed using Hexcel HexPly® carbon fiber prepregs. The composite drone was developed by a team of students from the University of Applied Sciences Upper Austria in Wels with composite materials supplied by Hexcel Neumarkt in Austria.

A team of six students in the university’s lightweight construction and composite materials course was responsible for the complete design, engineering, and manufacture of the camera drone over a period of 18 months. Hexcel materials and optimization of the composite engineering enabled the team to reduce the composite structural mass by an impressive 42% compared to similar drones.

Hexcel Neumarkt was one of eight industrial partners supporting the university team throughout the project, providing all carbon fiber prepreg materials used for the drone’s landing gear as well as the fuselage. The ultra-lightweight 32g landing gear was laid up and cured in the press, whereas the fuselage was autoclave cured by the student team using Hexcel HexPly M901 and HexPly M78.1 prepreg resin systems with a combination of woven and unidirectional carbon fiber reinforcements.

With the development of Unmanned Aerial Vehicles (UAV) as a key emerging market and innovation space in the transportation sector, Hexcel’s collaboration with the University of Applied Sciences Upper Austria team not only creates an important link with the next generation of lightweight composite engineers but also highlights the weight saving and structural benefits of Hexcel composite material solutions.

"The massive weight saving achieved with their updated version of the camera drone is a fantastic achievement by the student team," said Michael Rabl, Dean of FH Wels of the Upper Austria University of Applied Sciences. "The joint study not only illustrates the wide range of complex and innovative composite techniques present in the drone sector but also presents the opportunities that exist for further development in the wider Urban Air Mobility (UAM) and aerospace composites markets.”

Hexcel congratulates the project team which includes Lukas Weninger, Karl-Heinz Schneider, Jakob Schlosser, Matthias Thon, Marla Unter, and Simone Hartl on an exceptional piece of lightweight composite design and thanks them for showcasing the contribution of Hexcel materials with a presentation and drone flight. Johanna Arndt, research and technology group leader at Hexcel Neumarkt, said, “It was a great pleasure to work with the team who were very cooperative and self-motivated to succeed. Watching the drone just fly around the Neumarkt plant was just great.”

Hexcel manufactures a complete range of carbon fibers, dry carbon UD tapes, specialty reinforcements, prepregs, and honeycomb core materials, providing customized manufacturing options for new UAM applications that combine aerospace reliability with the high-rate production required. Hexcel composite materials are the ideal solution for the lightest and most efficient cost-competitive transportation vehicles of the future.

Ahlstrom-Munksjö has expanded its portfolio of biodegradable and renewable fiber-based solutions for food packaging papers, receiving compostability certification from the Biodegradable Products Institute®.

Continuing to be at the forefront of sustainable product offerings, Ahlstrom-Munksjö’s FluoroFree® and ParaFree® food packaging papers produced in North America are now BPI® certified, in addition to offering multiple sustainability attributes in a single product.  

These certifications facilitate the possibility for Ahlstrom-Munksjö customers, whether converters or brand owners, to achieve their own sustainability goals. By using a scientific process, BPI officially certifies compostable products that meet ASTM D6400 and ASTM D6868 standards for compostability. BPI Certification proves that a material will compost in a commercial composting facility, leaving behind no toxic residue or microplastics.

In addition, Ahlstrom-Munksjö’s ParaFree® Wax Alternative papers have achieved BPI Certifcation; papers manufactured without the addition of paraffin or other petroleum-based materials. ParaFree® products create a more sustainable alternative to this type of widely used quick service restaurant packaging. These products maintain a high-level of performance and are stronger on a pound-for-pound basis, allowing for improved yield and lower transportation costs and reducing its overall impact.

Oerlikon signs agreement to acquire INglass, a global leader in high precision polymer flow control equipment, to accelerate expansion strategy in polymer processing market

• INglass and its HRSflow Division is a market leader spezialized in hot runner sytems
• Technology is highly complementary to Oerlikon’s existing capabilities in polymer flow control and will expand Oerlikon’s market access
• Acquisition accelerates Oerlikon’s strategy in diversifying its manmade fibers business to expand into the high-growth polymer processing solution market
• Oerlikon renames ‘Manmade Fibers’ Division to ‘Polymer Processing Solutions’
• Acquisition is expected to be completed in the second quarter of 2021

Oerlikon, a leading provider of surface engineering, polymer processing and additive manufacturing, announced today that it has signed an agreement to acquire Italy-headquartered INglass S.p.A. and its innovative hot runner systems technology operating under its market-leading HRSflow business.

The strategic acquisition is a significant step in expanding Oerlikon’s current manmade fibers business into the larger polymer processing market. The acquisition accelerates and enhances existing organic initiatives to diversify and strengthen the company’s core high-precision polymer flow control capabilities, products and services. The completion of the transaction is subject to customary regulatory approvals and is expected by the second quarter of 2021.

To reflect Oerlikon’s expansion into a larger high-growth market, the Manmade Fibers Division will be renamed as Polymer Processing Solutions Division. This division will have two business units: Flow Control Solutions and Manmade Fibers Solutions. The busines unit Flow Control Solutions will combine the expertise of Oerlikon Barmag’s existing gear metering pumps business line and INglass’ HRSflow operations. The business unit Manmade Fibers Solutions will continue to focus on growing the existing chemical fiber machinery and plant engineering business, offering plant solutions for the production of polyester, polypropylene and polyamide.

“Our new Polymer Processing Solutions Division and the acquisition of INglass S.p.A. and its HRSflow business are critical components of Oerlikon Group’s growth strategy. We are accelerating our efforts to drive sustainable organic and inorganic growth in all of our businesses. The acquisition enables new synergy opportunities between both Oerlikon divisions in specific end markets such as automotive. With INglass and its HRSflow operations, we acquire leading suppliers in their markets with proven success of their technologies and services,” said Dr. Roland Fischer, CEO Oerlikon Group.

“We firmly believe that within the Oerlikon Group we can further exploit the potential of our hot runner systems technology and, when combined with the capabilities of Oerlikon Barmag gear metering pumps and their melt distribution engineering competence, will position our business as one of the leading precision flow control specialists for multiple applications in a global growth market”, said Antonio Bortuzzo, CEO of INglass S.p.A.

New business unit offers great growth potential

The Oerlikon Barmag competence brand already offers high precision flow control related components, including a large selection of gear metering pumps for textile and non-textile markets. These highly efficient pumps are used in silicone casting, dynamic mixing and oil spraying for the chemical, paint, polymer processing and automotive industries. This double-digit million CHF business, which has grown in recent years, will be merged with INglass’ HRSflow hot runner technologies under the new business unit Flow Control Solutions. HRSflow’s excellent market access to many OEMs in and outside the automotive industry brings significant growth opportunities.

INglass is a leader in automotive and expanding in other sectors

INglass S.p.A. is an internationally operating successful company established in 1987. Its product portfolio includes hot runners as well as engineering and consultancy services for the advanced development of polymer processing products. INglass’ HRSflow hot runner systems are applied in multiple industries from automotive, consumer goods and household appliances to packaging, waste management, construction and transportation.

INglass is headquartered in San Polo di Piave, Italy, near Venice. 2020 revenues of INglass were approximately CHF 135 million and the acquisition is expected to be immediately accretive to Oerlikon’s margins and cash flows. INglass has more than 1 000 employees and 55 sites worldwide, including production plants in Italy, China and the US. Among these sites are INglass’ newly renovated headquarters and production at its primary location in San Polo di Piave near Venice, Italy. The investment modernized the facilities with automated production, underlining the company’s commitment to sustainability and the environment. The other two modern production sites are in Zhejiang (Hangzhou Province) in China and Michigan (Grand Rapids) in the USA.

Following the integration with Oerlikon Barmag’s gear metering pumps business of about 200 employees in Remscheid, Germany, the new Flow Control Solutions business unit will have round about 1 200 employees.

"We see great potential for growth in our new Flow Control Solutions business unit,” said Georg Stausberg, Polymer Processing Solutions Division CEO and Member of the Executive Committee of the Oerlikon Group. “The businesses form the two core growth pillars and benefit from each other in global market development, in modern and digitized production, and in customer services. We also see potential synergies in R&D by combining existing know-how in the field of polymer processing. New technological solutions between hot runner systems and gear metering pumps are conceivable. We also anticipate collaborating more closely with the Oerlikon Surface Solutions Division, particularly in future mobility applications and functional polymer component solutions for the automotive industry. All in all, we will offer our customers innovative and attractive solutions in the field of polymer processing and high precision flow control components.”

Next steps for further diversification of the division product portfolio are already ongoing

Combining the divisions plant engineering and process know how with expertise on high precision flow control components technologies has a significant impact on product quality in nearly all applications, which opens up a platform for further organic and inorganic growth. "We are closely observing the megatrends in the markets and developing new business models to match. In the area of sustainability, covering topics such as circular economy, the recycling of materials using mechanical and chemical recycling solutions, as well as the handling of new, more environmentally friendly and biodegradable materials, we are on the verge of a breakthrough. We are ready to actively participate in these growth areas,” added Georg Stausberg.

“In realigning the Polymer Processing Solutions Division, Oerlikon will continue to apply our successful recipe of a lean organizational structure to efficiently manage the business. This means clear processes, short decision-making paths and competent teams in a diverse and multicultural organization in which everyone can contribute innovatively to create customer value,” said Georg Stausberg.

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

ITA, as one of the largest institutes on the campus of the excellence University RWTH Aachen, Germany, develops complete solutions from the manufacturing of the fiber itself over the processing of textile intermediates with thermoplastic and thermoset resins, textile-based part manufacturing, capabilities such as braiding, pultrusion and in-situ impregnation of textile preforms. Top 3 focused industries are transportation and particularly the e-mobility sector, building and construction as well as the wind energy sector. Additionally, ITA GmbH is the partner of the industry in R&D, focusing on 8 business segments, providing technology and knowledge transfer, as well as offering comprehensive solutions along the entire textile value chain.

Prof. Dr. Thomas Gries, Director of ITA, explains the background of the strategic cooperation with focus on composites: „Our long-term experience and unmatched know-how with all aspects of continuous fibers, non-wovens and web-based reinforcements allows us to deliver to the composite manufacturers a complete technology and service offer around the development of technical textiles, from the development of glass and carbon fibers to the textile-based processing of composite parts. In all process steps of our research and developments, we focus on sustainable and recyclable solutions, an efficient cost-performance ratio, the possible use of bio-based materials and the reduction of the CO2 footprint. We are glad to cooperate with Dr. Michael Effing and AMAC in order to benefit from his door-opening network in the composites industry. “

Dr. Michael Effing, Managing Director of AMAC GmbH: „I am very happy to support the ITA to generate innovation thanks to further industrial networking and pre-competitive joint projects. ITA is indeed a one-stop source for composite solutions from the fiber to the cost-efficient manufacturing of final parts. In the context of the Covid-19 impact to the entire industry, it makes sense to bundle forces. Furthermore, ITA, with its long tradition and satisfied customers offers further valuable networking opportunities to the composites industry as well as access to relevant complementary fiber-based excellence and 250 different technologies in their machine-park with an outstanding infrastructure in Aachen.”

At first glance, rowing boats, the Airbus 380, safety equipment and stadium roofing have very little on common. They receive their specific properties as a result of the use of special fibers, among other things: aramid fibers and carbon fibers are processed into special yarns that are frequently deployed as compound materials. These fibers are growing in demand as the world seeks to reduce its reliance on fossil fuels; new solutions are required to reduce weight and replace heavy metallic parts.

Aramid fibers are produced in a highly-chemical process that is extremely aggressive; the acrylic precursor used to manufacture carbon fibers is a different process, but again no less difficult. In these sophisticated processes, the gear metering pumps are not only responsible for the high-precision control of the melt transport; durability, resistance within aggressive environments and cost efficiency also play decisive roles.

Special materials for special tasks
The process, the expected pump lifespan and the maintenance frequency are the decisive factors for choosing the materials from which the pumps and their components are manufactured. For optimum results, Oerlikon Barmag offers solutions that intelligently combine the various materials and the latest technologies. Whether in the case of surfaces with ceramic coatings, gears and shafts featuring DLC coatings, pumps made from cobalt alloys (StelliteTM) or robust and durable Oerlikon Barmag hybrid constructions comprising zirconium oxide ceramic and duplex stainless steel – the high-precision ZP- and GM-series pumps are design-optimized depending on the intended use. Various seal systems and customized drive concepts round off the pump program.

• Finnish coating and gelcoat manufacturer Finnester strengthens its activities in the D-A-CH region with AMAC

As of September 15th 2020, the Finland-based coating and gelcoat manufacturer Finnester Coatings Oy strengthens its activities in German speaking countries, the so-called D- A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC.

Finnester is a pioneer in developing high-quality coatings and gelcoat for both urface spread as well as flame and thermal insulation of composite solutions in different fields of industries. Their portfolio comprises products based on Polyester coatings for fire and thermal protection as well as ceramifying polymers like HybridRED, compliant with the requirements of the standards e.g. EN45545-2. In
order to develop new business opportunities in the D-A-CH region for the endmarkets building and infrastructure, transportation, marine, industrial and electrical industries, Finnester is cooperating with AMAC to accelerate the process of locating suitable partnerships.

Ari Hokkanen, CEO of Finnester: “Finnester has developed unique high-quality coatings. The cooperation with AMAC will accelerate our growth ambitions and supports us in finding new business opportunities. We are happy to benefit from AMAC and Dr. Effing’s long-term experience as a pioneer in the composites industry and his high-quality network along the entire value chain.” Dr. Effing, CEO of AMAC GmbH confirms: “Fire-retardant coatings are very important to the composites industry in order to be successful especially in rail, fast ferry and building & infrastructure applications with their tough fire standards. The DACH region represents more than 30 % of the European market and is the key target for Finnester. I am looking forward to supporting Finnester with their unique offerings and connecting them with key players in the D-A-CH region.”

• RUDOLF GROUP is thrilled to unveil the perfected antiviral features embedded in RUCO®-BAC AGP, the Company’s flagship antimicrobial product for textile applications.

As a consequence of COVID-19 global pandemic the demand for chemical auxiliaries with antimicrobial effect has boomed. RUDOLF GROUP invested important resources in the meticulous assessment of a new antiviral feature which is now added to one of their leading technologies .

Such an effort returned the surprisingly fast and most comprehensive antibacterial and antiviral textile finishing on the market: RUCO®-BAC AGP.

History has led to great vision and innovation

The powerful antimicrobial effectiveness of RUCO®-BAC AGP is rooted in the extraordinary properties of silver, whose antimicrobial magic is lost in the mists of time. Already known by the ancient Romans, Greeks and Egyptians, water and milk were preserved by using silver coins through the early modern age.

R&D at RUDOLF GROUP has mounted silver on highly sophisticated, functional and registered microstructures that strengthen and amplify the qualities of this noble metal.

RUDOLF’s proprietary microstructures are the responsible hidden secret and key technical breakthrough behind both efficacy and durability of RUCO®-BAC AGP. This innovation is now the preferred solution to help reducing proliferation and cross-contamination of bacteria and enveloped-virus on textiles.

One gram of microstructures has the astonishing superficial area of about 60 m². The advantage of a much higher surface is that the consumption of resources and dosages can be minimized by the factor 100 and that makes RUCO®-BAC AGP a highly conscious choice.

“Due to the microstructures, a virtually infinite protective shield is created in the textile from which highly effective positive silver ions are set free in small, exactly dosed quantities” says Dr. Dirk Sielemann, R&D Director at Rudolf Group.

Taking performance to the next level

RUCO-BAC AGP effectively protects any textile against bacteria (harmful and odour-causing) and its superior antiviral performance on textiles has been independently demonstrated by applying the most modern testing methods. Assessments were carried out on enveloped Coronaviridae families known to cause a broad spectrum of animal and human diseases.

The microstructures in RUCO®-BAC AGP trigger their powerful antibacterial and antiviral effects based on 3 distinctive inhibiting mechanisms:
1.    Blocking of oxygen-transporting enzymes therefore leading to impaired growth;
2.    Crushing of disulfide bonds and therefore structure of sulphur-containing proteins.
3.    Possible interference with Bacteria and virus surface protein in the membrane.

RUCO®-BAC AGP is intended for the protection of the treated textiles and the microstructures of RUCO®-BAC AGP were studied thinking of performance and safety. It is suitable for next-to-skin applications and cytotoxicity tests show that RUCO®-BAC AGP has no influence on the natural microflora of the skin. Furthermore, because of the adhesion mechanism of its microstructures, RUCO®-BAC AGP is only active in/on the textile and it is non-migrating. 

“This year 202o is being highly emotional and it’s leading to the widespread introduction of antimicrobials on textile and to a myriad of vague, misleading or unsubstantiated marketing claims”, states Dr. Gunther Duschek, Managing Director at RUDOLF GROUP. He concludes “As a highly responsible company, we move cautiously and stand for technologies and practices that are effective, truthful and limit the exposure of apparel manufacturers, retailers and buyers to any risk”.

• Porcher Industries presents the future of quiet and clean mobility solutions with materials that offer high-performance thermal and acoustical insulation.

The 5th Edition of the Annual Automotive Exhaust Systems Summit, to be held in Dusseldorf on November 28th-29th, will see Porcher Industries showcase the market’s most complete range of high performance thermal and acoustical insulation products.

With a key strategic thrust targeting quiet and clean mobility by developing new insulation applications, Porcher Industries’ range of textiles meet the demands and requirements of the Automotive, Aerospace and other transport sectors by delivering unsurpassed levels of thermal and acoustical management.

On display the group will showcase its Techmat®, SilcoSoft® and ThermoShield® materials – all highly functional non-woven textiles that can be found in key areas of both the hot and cold ends of vehicle exhaust systems.

Produced from 100% non-respirable fibres, these binder free non-wovens are safe to handle and can be tailored to provide application specific thermal insulation and heat shields at temperatures ranging from 650˚C to 1150˚C (1200°F to 2100°F).

Porcher Industries is able to deliver its Techmat®, SilcoSoft® and ThermoShield® materials in a wide range of formats from roll goods, flat or formed shapes through to sub-assemblies and finished parts that combine metallic layers with their insulation materials.

Porcher Industries’ thermal and acoustical insulation solutions will also be on show in Dusseldorf: technical textiles that blend chemistry and fibre processing technology to produce a powerful range of non-woven and glass mat thermoplastics (GMT) materials that can be tailored to a customer’s specific acoustical and thermal insulation requirements.

In addition, Andreas Stoeferle, Technical Support Engineer, EMEA, Porcher Industries, will present a detailed view of the group’s expertise in high performance insulations, their global reach, products and delivery formats on the opening day of the conference.

“As one of the leading manufacturers of specialist technical textiles within the Automotive sector, we have responded to demand and placed significant development time and resource into developing our range of thermal and acoustical material solutions for Automotive and Aerospace.” commented Pierre-Yves Quéfélec, Global Aerospace & Automotive BU Head.

New products for photopolymer and laser sinter printing methods from BASF 3D Printing Solutions GmbH (B3DPS) are on show from November 13 to 16 at Stand F20 in Hall 3.1 at this year’s formnext fair in Frankfurt. The BASF subsidiary is also announcing several new partnerships for the development and distribution of groundbreaking 3D printing solutions and products.

B3DPS has entered into a strategic partnership with the US company Origin, San Francisco, California for the further development of photopolymer printing processes. “Within the framework of an open business model, we are combining BASF’s material know-how with Origin’s expertise in printer software programming and the manufacture of the corresponding hardware,” explained Volker Hammes, Managing Director BASF 3D Printing Solutions GmbH. The collaboration has already shown the first signs of success. Origin has developed a new printing method where BASF’s new Ultracur3D photopolymers can be processed particularly well. The technology offers an optimal combination of a good surface finish and high mechanical stability, while also allowing for high material throughput.

B3DPS is working together with Photocentric, a manufacturer of 3D printers and their corresponding software and materials, on the development of new photopolymers and large-format photopolymer printers for mass production of functional components. Based in Peterborough, UK and Phoenix, USA, Photocentric has developed and optimized the use of LCD screens as image generators for its own printing systems. The two partners plan to offer the industry 3D printing solutions that replace parts of traditional manufacturing processes such as injection molding for small series, as well as enabling the production of large components.

The objective of the cooperation with Xunshi Technology, a Chinese printer manufacturer headquartered in Shaoxing, and operates in USA under the name Sprintray, will be opening new fields of application in 3D printing for the Ultracur3D product range of B3DPS.

Ultracur3D specialties for photopolymer printing processes
B3DPS has grouped well-established and new photopolymers designed for the respective 3D printing processes under the brand name Ultracur3D. BASF has developed unique raw materials for its new products that enable special part properties.
“Our Ultracur3D portfolio enables us to offer customers various UV-curable materials for 3D printing that provide far better mechanical properties and higher long-term stability than most available materials,” explained András Marton, Senior Business Development Manager at B3DPS. He added: “These materials have been developed for functional components that are subject to high stress.”

Expansion of distribution network for filaments
Innofil3D, a subsidiary of B3DPS, is entering into a partnership with Jet-Mate Technology, based in Tjanjin, China, for the distribution of plastic filaments in China. In parallel, a distribution agreement has been concluded with M. Holland in Northbrook, USA for the distribution of filaments in USA. “Since the USA is the largest market for filaments, we intend to strengthen our activities there,” said Jeroen Wiggers, Business Director 3DP Solutions for Additive Extrusion at B3DPS, adding: “Asia is another important market for us. We will be developing further distribution channels there and putting our Ultrafuse filaments on the Asian market in 2019.”

BASF’s portfolio of filaments for 3D printing are comprised of two categories; the well-established Innofil3D filaments based on generic polymers for conventional applications and polymer-based Ultrafuse filaments for advanced formulations used in demanding technical applications. One of the broadest filament selections on the market, this portfolio covers customer requirements ranging from prototype to industrial-scale production.

SLS: new 3D printing material with fire protection classification
New flame-resistant Ultrasint Polyamide PA6 Black FR meets UL94 V2 fire protection standards and is a new material class for use in selective laser sintering (SLS) processes, distinguished by high stiffness and thermal stability. In cooperation with one of the global leaders of public transportation vehicles, B3DPS has developed new components that meet vehicle fire protection requirements. “Together with our partner, we are currently producing prototypes, spare parts, and small series components, and are working to further improve flame resistance to meet additional certification specifications,” explained Hammes.
BASF introduced Ultrasint Grey PA6 LM X085 at AMUG this spring and now is followed by another product on show at formnext. Ultrasint PA6 Black LM X085 is based on polyamide 6, and can be processed at 175-185 degrees Celsius therefore making it suitable for most current SLS machines.

B3DPS adds polypropylene to its 3D printing portfolio
Through the acquisition of Advanc3D Materials GmbH in July 2018, B3DPS has expanded its range with numerous materials for use on laser sinter machines, including polyamide Adsint PA12, Adsint PA11, Adsint PA11CF and Adsint TPU flex 90.
Ultrasint PP is a special highlight. This polypropylene-based product exhibits outstanding mechanical properties and is frequently used in standard industrial production as it offers a good balance between price and performance. Ultrasint PP is distinguished by excellent plasticity, low moisture uptake, and resistance to liquids and gases. Prototypes and small batches can now be produced from the same material as used for traditional serial production. Post treatments such as thermoforming, sealing, and dyeing can be performed after printing.