From the Sector

Reset
50 results
LIFE ANHIDRA project Photo: (c) Pizarro
LIFE ANHIDRA project
28.11.2024

Revolutionizing sustainable water management in the textile industry

The European LIFE ANHIDRA project marks a milestone in sustainability with the unveiling of its innovative closed-loop system for treating and reusing textile wastewater. During the event held at the Pizarro facility in Guimarães (Portugal), ANHIDRA was introduced as a revolutionary solution transforming water management in the textile industry. The event brought together the project’s key partners: Jeanologia, the Spanish company responsible for designing and building ANHIDRA and a global leader in sustainable technologies for the textile sector; AITEX, the Textile Industry Research Association; and Portuguese textile company Pizarro, accompanied by representatives from the European Commission.

The European LIFE ANHIDRA project marks a milestone in sustainability with the unveiling of its innovative closed-loop system for treating and reusing textile wastewater. During the event held at the Pizarro facility in Guimarães (Portugal), ANHIDRA was introduced as a revolutionary solution transforming water management in the textile industry. The event brought together the project’s key partners: Jeanologia, the Spanish company responsible for designing and building ANHIDRA and a global leader in sustainable technologies for the textile sector; AITEX, the Textile Industry Research Association; and Portuguese textile company Pizarro, accompanied by representatives from the European Commission.

A solution to reduce the textile industry’s water footprint
The textile industry consumes an estimated 93 billion m³ of water annually, accounting for 4% of global water use. ANHIDRA addresses this critical challenge by regenerating up to 95% of the water used in textile washing and finishing processes, returning it in optimal conditions for reuse.
With zero discharges, zero contamination, and no complex treatments, ANHIDRA stands out with exceptional results:

  • 92% reduction in water consumption
  • 98% reduction in wastewater generation
  • Up to 15% reduction in energy consumption

ANHIDRA not only minimizes environmental impact but also reduces the operational costs associated with traditional water management, making it a competitive and eco-friendly solution.

Innovation and circular economy
Beyond water regeneration, ANHIDRA focuses on reusing textile waste. In collaboration with AITEX, the project is exploring how to transform fibrous fragments collected during water treatment into new textile products, reinforcing the project’s commitment to the circular economy.

"ANHIDRA not only transforms water management in the textile industry but also proves that sustainability and competitiveness can go hand in hand. This system sets a new global benchmark," said Vicent Albert, Jeanologia’s Product and Technology Director.

During the event, attendees observed the various stages of the system in action at the Pizarro pilot plant. The project plans to implement ANHIDRA in at least 36 industrial facilities over the next three years, aiming to expand to 100 systems internationally within five years. This is expected to save up to 12.34 million m³ of water annually.

Funded by the European Union's LIFE program, LIFE ANHIDRA demonstrates how business cooperation and technological innovation can provide effective solutions to major environmental challenges. "Our goal is to make this technology accessible to the entire textile industry, contributing to a more sustainable future for fashion and the planet," concluded Vicent Albert, project coordinator.

________________________________________

This project has received funding from the European Union's LIFE program (grant agreement no. 101074372). The content of this document is the sole responsibility of the authors and does not necessarily reflect the position of the European Union, CINEA, or the corresponding funding program.

 

Source:

ANHIDRA project

26.07.2024

VDMA Position Statement: Textile machinery for a sustainable textile industry

In a position paper published, the companies organised in the VDMA Textile Machinery Association comment on the ambitious EU regulations and their national implementation for the sustainable and circular transformation of the textile and clothing industry.

The production of textiles requires a large number of resources, such as water, energy and chemicals. “The members of VDMA Textile Machinery support customers with products worldwide to utilise great potential already at the textile production stage to thereby reduce CO2 emissions“, explained Verena Thies, Deputy Chairwoman of VDMA Textile Machinery.

In a position paper published, the companies organised in the VDMA Textile Machinery Association comment on the ambitious EU regulations and their national implementation for the sustainable and circular transformation of the textile and clothing industry.

The production of textiles requires a large number of resources, such as water, energy and chemicals. “The members of VDMA Textile Machinery support customers with products worldwide to utilise great potential already at the textile production stage to thereby reduce CO2 emissions“, explained Verena Thies, Deputy Chairwoman of VDMA Textile Machinery.

The position statement emphasises the importance of efficient processes, circular economy and binding rules for all market participants. Besides, the position paper summarises the status of textile-to-textile recycling processes as well as the framework conditions for reprocessing of recyclates. The companies of VDMA Textile Machinery develop processes and technologies for recycling and provide the technical prerequisites for the efficient reuse and recycling of textile raw materials, whether natural or man-made fibres.
The Executive Board of VDMA Textile Machinery stresses additionally, that the new EU regulations for circular economy and their national implementation must be designed with realistic targets, measurable effects and as little bureaucracy as possible. Furthermore, market surveillance is needed to ensure a level playing field for all market participants.

On behalf of the industry, the VDMA Textile Machinery Association calls for creating better location conditions in Germany and EU as a favourable environment for innovation und competitiveness for textile machinery manufacturing to significantly advance the sustainability of the textile industry: The Textile Machinery Association strongly emphasises the need for a wide range of low-cost green energy, which is essential for the implementation and sustainable use of recycling solutions in the manufacturing industry. The association also sees the positive shaping of location conditions (the potential for skilled labour, a reduction in bureaucracy, shorter approval periods, investment security and predictability as well as a reduction in the tax burden) as a decisive factor for supporting sustainable business in the highly competitive textile and clothing industry.

Source:

VDMA e. V.

CARBIOS and Zhink Group: Partnership for PET biorecycling in China (c) CARBIOS
03.07.2024

CARBIOS and Zhink Group: Partnership for PET biorecycling in China

CARBIOS and Zhink Group, specializing in two global industries, PET and textiles, announce the signing of a joint Letter of Intent to build a biorecycling plant in China using CARBIOS’ revolutionary enzymatic depolymerization technology to serve the global market. This agreement officializes collaboration towards a long-term partnership in view of a first licensing contract to build a plant with a minimum annual processing capacity of 50k tons of prepared PET waste and would contribute to accelerating a circular economy for plastic and textiles. China is a key market for CARBIOS, and this agreement would establish a presence in this dominant market.

With 67 million tons of PET produced annually, representing 61% of global production[1], China is the world's largest PET producer. With regional and global demand for recycled PET growing, China also has the potential to take the lead in recycled PET (r-PET) production. In 2021, 58% of the world’s r-PET was consumed in Asia (with 38% in China[2]) underscoring this region’s importance both as a major producer and consumer.

CARBIOS and Zhink Group, specializing in two global industries, PET and textiles, announce the signing of a joint Letter of Intent to build a biorecycling plant in China using CARBIOS’ revolutionary enzymatic depolymerization technology to serve the global market. This agreement officializes collaboration towards a long-term partnership in view of a first licensing contract to build a plant with a minimum annual processing capacity of 50k tons of prepared PET waste and would contribute to accelerating a circular economy for plastic and textiles. China is a key market for CARBIOS, and this agreement would establish a presence in this dominant market.

With 67 million tons of PET produced annually, representing 61% of global production[1], China is the world's largest PET producer. With regional and global demand for recycled PET growing, China also has the potential to take the lead in recycled PET (r-PET) production. In 2021, 58% of the world’s r-PET was consumed in Asia (with 38% in China[2]) underscoring this region’s importance both as a major producer and consumer.

Furthermore, China is a key transformer of PET into resins and fibers used in numerous applications in the packaging and textile industries.  Most notably, China is the primary country for transforming PET into fiber, representing 78% of all PET fiber transformation in the world[3].

For Zhink, the strategic focus is on the development of two global industries, PET and textiles, and to be a leader with sustainable competitiveness. Zhink is a major actor within the PET market with an annual production of 3 million tons of PET, serving domestic and global markets. CARBIOS has developed a enzymatic depolymerization technology that enables efficient and solvent-free recycling of PET plastic and textile waste into virgin-like products. The initial agreement between the two groups would allow Zhink to increase its recycled PET capacities and meet its sustainable competitiveness objectives by offering r-PET from enzymatic recycling: a circular recycling solution that can process all types of PET waste including hard-to-recycle waste (such as opaque and colored bottles, multilayer food trays and textile waste) while reducing CO2 emissions by 57%[4] compared with virgin PET production. For CARBIOS, this agreement marks a significant step in the deployment of its technology worldwide and roll-out of its licensing model to achieve its ambition to become a leading technology provider in the recycling of PET by 2035. This Asia-based plant under license by Zhink would come in addition to the world’s first industrial-scale enzymatic PET recycling plant which is currently under construction in Longlaville, France.

[1] HIS Markit 2021, Market Research Future 2021
[2] HIS Markit 2021, Market Research Future 2021
[3] HIS Markit 2021, Market Research Future 2021
[4] Database ecoinvent 3.8; French scenario, taking into account the detour of 50% of PET waste from conventional end-of-life. Virgin PET: 2.53 kg CO2/kg (cradle to gate)

Source:

CARBIOS

16.04.2024

Stratasys published Second ESG and Sustainability Report

Stratasys Ltd. published its second Mindful Manufacturing™ ESG and Sustainability Report in accordance with the Global Reporting Initiative (GRI) standards, fulfilling its commitment to transparency. The report includes an extensive overview of activities and advancements in Stratasys’ environmental, social and governance (ESG) programs.

Some highlights of the Mindful Manufacturing ESG and Sustainability report, by category, include:

Environmental

  • Stratasys reduced water intensity by 32.5 percent across global operations, leading to an overall reduction in water usage by the company.
  • Solar panels installed at Israeli facilities generated 441,339 kWh of renewable energy, which contributed to 207 metric tons of reduced CO2 emissions, or the equivalent of planting 3,423 trees
  • Double digit (11.3 percent) increases in the number of spools, cartridges and canisters recycled through a new recycling program.

Social

Stratasys Ltd. published its second Mindful Manufacturing™ ESG and Sustainability Report in accordance with the Global Reporting Initiative (GRI) standards, fulfilling its commitment to transparency. The report includes an extensive overview of activities and advancements in Stratasys’ environmental, social and governance (ESG) programs.

Some highlights of the Mindful Manufacturing ESG and Sustainability report, by category, include:

Environmental

  • Stratasys reduced water intensity by 32.5 percent across global operations, leading to an overall reduction in water usage by the company.
  • Solar panels installed at Israeli facilities generated 441,339 kWh of renewable energy, which contributed to 207 metric tons of reduced CO2 emissions, or the equivalent of planting 3,423 trees
  • Double digit (11.3 percent) increases in the number of spools, cartridges and canisters recycled through a new recycling program.

Social

  • More than 38,000 hours of employee training were provided, equaling 18 hours of training per employee.
  • Approaching world-class status with employee engagement, with a 78 percent participation rate in the last all-employee survey, with an all-time high engagement score of 73.
  • 81 percent of managers participated in management training.
  • 4 diversity KPIs were set in 2022, focusing on hiring practices. Targets were:
  • 100 percent of candidate slates for manager and above will have a diverse slate
  • 35 percent of management hires will be women
  • 25 percent of tech hires will be women
  • 40 percent of intern/student hires to reflect a range of ethnicity and gender diversity.

Governance

  • 100 percent of new suppliers in 2021 and 2022 signed the Supplier Code of Conduct, which includes environmental, social and ethical standards.
  • More than 97% of all employees completed compliance training.
  • No product-related health and safety incidents of non-compliance occurred in 2021 or 2022.
Source:

Stratasys Ltd.

Winner of Cellulose Fibre Innovation Award 2024 (c) nova-Institute
Winner of Cellulose Fibre Innovation Award 2024
27.03.2024

Winner of Cellulose Fibre Innovation Award 2024

The “Cellulose Fibres Conference 2024” held in Cologne on 13-14 March demonstrated the innovative power of the cellulose fibre industry. Several projects and scale-ups for textiles, hygiene products, construction and packaging showed the growth and bright future of this industry, supported by the policy framework to reduce single-use plastic products, such as the Single Use Plastics Directive (SUPD) in Europe.

The “Cellulose Fibres Conference 2024” held in Cologne on 13-14 March demonstrated the innovative power of the cellulose fibre industry. Several projects and scale-ups for textiles, hygiene products, construction and packaging showed the growth and bright future of this industry, supported by the policy framework to reduce single-use plastic products, such as the Single Use Plastics Directive (SUPD) in Europe.

40 international speakers presented the latest market trends in their industry and illustrated the innovation potential of cellulose fibres. Leading experts introduced new technologies for the recycling of cellulose-rich raw materials and gave insights into circular economy practices in the fields of textiles, hygiene, construction and packaging. All presentations were followed by exciting panel discussions with active audience participation including numerous questions and comments from the audience in Cologne and online. Once again, the Cellulose Fibres Conference proved to be an excellent networking opportunity to the 214 participants and 23 exhibitors from 27 countries. The annual conference is a unique meeting point for the global cellulose fibre industry.  

For the fourth time, nova-Institute has awarded the “Cellulose Fibre Innovation of the Year” Award at the Cellulose Fibres Conference. The Innovation Award recognises applications and innovations that will lead the way in the industry’s transition to sustainable fibres. Close race between the nominees – “The Straw Flexi-Dress” by DITF & VRETENA (Germany), cellulose textile fibre from unbleached straw pulp, is the winning cellulose fibre innovation 2024, followed by HONEXT (Spain) with the “HONEXT® Board FR-B (B-s1, d0)” from fibre waste from the paper industry, while TreeToTextile (Sweden) with their “New Generation of Bio-based and Resource-efficient Fibre” won third place.

Prior to the event, the conference advisory board had nominated six remarkable innovations for the award. The nominees were neck and neck, when the winners were elected in a live vote by the audience on the first day of the conference.

First place
DITF & VRETENA (Germany): The Straw Flexi-Dress – Design Meets Sustainability

The Flexi-Dress design was inspired by the natural golden colour and silky touch of HighPerCell® (HPC) filaments based on unbleached straw pulp. These cellulose filaments are produced using environmentally friendly spinning technology in a closed-loop production process. The design decisions focused on the emotional connection and attachment to the HPC material to create a local and circular fashion product. The Flexi-Dress is designed as a versatile knitted garment – from work to street – that can be worn as a dress, but can also be split into two pieces – used separately as a top and a straight skirt. The top can also be worn with the V-neck front or back. The HPC textile knit structure was considered important for comfort and emotional properties.

Second place
Honext Material (Spain): HONEXT® Board FR-B (B-s1, d0) – Flame-retardant Board made From Upcycled Fibre Waste From the Paper Industry

HONEXT® FR-B board (B-s1, d0) is a flame-retardant board made from 100 % upcycled industrial waste fibres from the paper industry. Thanks to innovations in biotechnology, paper sludge is upcycled – the previously “worthless” residue from paper making – to create a fully recyclable material, all without the use of resins. This lightweight and easy-to-handle board boasts high mechanical performance and stability, along with low thermal conductivity, making it perfect for various applications in all interior environments where fire safety is a priority. The material is non-toxic, with no added VOCs, ensuring safety for both people and the planet. A sustainable and healthy material for the built environment, it achieves Cradle-to-Cradle Certified GOLD, and Material Health CertificateTM Gold Level version 4.0 with a carbon-negative footprint. Additionally, the product is verified in the Product Environmental Footprint.

Third Place
TreeToTextile (Sweden): A New Generation of Bio-based and Resource-efficient Fibre

TreeToTextile has developed a unique, sustainable and resource efficient fibre that doesn’t exist on the market today. It has a natural dry feel similar to cotton and a semi-dull sheen and high drape like viscose. It is based on cellulose and has the potential to complement or replace cotton, viscose and polyester as a single fibre or in blends, depending on the application.
TreeToTextile Technology™ has a low demand for chemicals, energy and water. According to a third party verified LCA, the TreeToTextile fibre has a climate impact of 0.6 kg CO2 eq/kilo fibre. The fibre is made from bio-based and traceable resources and is biodegradable.

The next conference will be held on 12-13 March 2025.

Source:

nova-Institut für politische und ökologische Innovation GmbH

Vesta Corporation presented first Sustainability Report (c) Vesta Corporation
05.01.2024

Vesta Corporation: First Sustainability Report

The Tuscan tannery Vesta Corporation has presented to its stakeholders a report outlining its current commitment and future objectives, with a view to innovating, safeguarding and fostering high-end leather material processing.

Ever since it was founded in 1966 in Ponte a Egola, the Tuscan hub for the production of leather for vegetable tanned soles, Vesta has been a supplier and partner of haute couture and sportswear brands, from lightweight calf and half-calf leather, to heavy leathers made with hind and rump hide, for leatherware and shoes.

The Tuscan tannery Vesta Corporation has presented to its stakeholders a report outlining its current commitment and future objectives, with a view to innovating, safeguarding and fostering high-end leather material processing.

Ever since it was founded in 1966 in Ponte a Egola, the Tuscan hub for the production of leather for vegetable tanned soles, Vesta has been a supplier and partner of haute couture and sportswear brands, from lightweight calf and half-calf leather, to heavy leathers made with hind and rump hide, for leatherware and shoes.

To draft this Report, reference was made to the “Global Reporting Initiative Sustainability Reporting Standards” established by the Global Reporting Initiative (GRI). The information in the balance sheet refers to the year 2022 (from 1 January to 31December 2022). Wherever possible, data for the previous year are included, to allow for a comparison of data over time and to assess the trend of Vesta activities. Sustainability is an objective-driven process. This means that comparing data allows for concretely measuring the company’s progress, as it pursues this accounting process year after year.

The improvement actions already implemented by Vesta involve corporate responsibility from an environmental, social and governance perspective. An example are the improved heating and processing plants (which entails the construction of a new tumbling department based on 4.0 technology). This guarantees significant energy, water and economic savings. Along with numerous corporate certifications, the company has passed the Raw Material Traceability test with a score of EXCELLENT, as well as the Carbon and Water footprint analysis.

As confirmation of its commitment to improving corporate performance levels, Vesta has been upgraded from BRONZE (2020) to GOLD in 2023, as assessed by the Leather Working Group (which measures leather manufacturers’ environmental performance for ecological production and for a systemic management of quality, environmental, safety and ethical factors).

Becoming energy-independent is a major step in the pipeline, involving the installation of a photovoltaic plant. This is complemented by the implementation of a project aimed at totally compensating its CO2 emissions for the year subject to accounting and certification. This neutrality will be achieved through the acquisition of credits deriving from projects certified by the United Nations. For example, with the construction of an important hydro-electric plant to which Vesta is contributing. With regard to production, corporate research is currently focused on developing solutions to reduce water and energy use. It is also implementing circular trends by adopting an increasing number of bio-based products, to guarantee the most sustainable end-of-life and waste management for its products.

Source:

Vesta Corporation

Fußballstadion Bild von Pexels auf Pixabay
20.11.2023

University of Manchester academics criticising UK government

Sustainable fashion and sportswear must be high on the political agenda:
Three University of Manchester academics who specialise in fashion and textiles have criticised the Government for failing to take action to boost sustainability in the UK fashion and sportswear industries.

In an article published by the University’s policy engagement unit Policy@Manchester to coincide with the 20th annual Recycle Week, Lindsay Pressdee, Dr Amy Benstead and Dr Jo Conlon highlight that, of the one million tonnes of textiles disposed of every year in this country, 300,000 tonnes end up in landfill or incineration with figures suggesting 10 per cent of global CO2 emissions may come from the fashion industry.

And they warn that the damage inflicted by discarded sportswear is often overlooked, “despite an over-reliance on polyester garments, which are harmful to the environment as the fabric releases microfibres and takes hundreds of years to fully biodegrade.”

Sustainable fashion and sportswear must be high on the political agenda:
Three University of Manchester academics who specialise in fashion and textiles have criticised the Government for failing to take action to boost sustainability in the UK fashion and sportswear industries.

In an article published by the University’s policy engagement unit Policy@Manchester to coincide with the 20th annual Recycle Week, Lindsay Pressdee, Dr Amy Benstead and Dr Jo Conlon highlight that, of the one million tonnes of textiles disposed of every year in this country, 300,000 tonnes end up in landfill or incineration with figures suggesting 10 per cent of global CO2 emissions may come from the fashion industry.

And they warn that the damage inflicted by discarded sportswear is often overlooked, “despite an over-reliance on polyester garments, which are harmful to the environment as the fabric releases microfibres and takes hundreds of years to fully biodegrade.”

Pressdee, Benstead and Conlon stress the importance of establishing “sustainable behaviour throughout the supply chain” and praise the European Commission for proposing an “extended producer responsibility (EPR)” for textiles in the EU which “aims to create appropriate incentives to encourage producers to design products that have a reduced environmental impact at the end of their life.”

This contrasts with the UK where, they argue, “tackling sustainability in the fashion industry has lost its place on the political agenda.”

"We are calling on the Government to reintroduce textiles as part of the school curriculum to engage young people in sustainable materials and equip them with the basic skills required to repair clothes.”
Lindsay Pressdee, Dr Amy Benstead and Dr Jo Conlon

The University of Manchester academics contend that there has been “disappointing lack of progress from the UK Government” following the House of Commons Environmental Audit Committee’s Fixing Fashion report in 2019.

They continue: “This report included a call for the use of EPR as well as other important recommendations such as a ban on incinerating or landfilling unsold stock that can be reused or recycled and a tax system that shifts the balance of incentives in favour of reuse, repair and recycling to support responsible companies. We urge the Government to think again and drive forward the Committee’s recommendations in order to put sustainable fashion back on the political agenda.”

Pressdee, Benstead and Conlon also criticise Ministers for abolishing the standalone GCSE in textiles which provided many young people with the ability to mend clothing such as football kits instead of throwing them away.

They write: “We are therefore calling on the Government to reintroduce textiles as part of the school curriculum to engage young people in sustainable materials and equip them with the basic skills required to repair clothes.”

The University of Manchester has launched a new project dedicated to tackling the impact of textile waste in the football industry through the provision of workshops tasked with transforming surplus football shirts into unique reusable tote bags, whilst educating local communities on the environmental impacts of textile waste and how to extend the life of garments. The initiative aims to provide a fun, responsible way to keep kits in circulation while shining a light on the problem.

More information:
United Kingdom politics
Source:

University of Manchester

Responsible Care Federal Competition 2023 Photo Rudolf GmbH
12.10.2023

RUDOLF wins Responsible Care Federal Competition 2023

The innovative company RUDOLF has been honoured for its outstanding achievements in the field of sustainability and environmental protection and has won the coveted Responsible Care Federal Competition 2023 in the category SME.

The innovative company RUDOLF has been honoured for its outstanding achievements in the field of sustainability and environmental protection and has won the coveted Responsible Care Federal Competition 2023 in the category SME.

The award was presented as part of a competition organised by the German Chemical Industry Association (VCI). Responsible Care is a voluntary initiative of the chemical industry. Its aim is continuous improvement in the areas of environmental protection, health and safety. Chemical companies and associations in more than 50 countries support the initiative. The award-winning project of the innovative company RUDOLF impressed the jury with its pioneering technology, which reduces CO2 emissions by up to 99.9 % compared to conventional cooling systems. „The project uses near-surface geothermal energy for industrial cooling - according to the motto „Efficiency First“ the most efficient way has been chosen!“ - Jury statement
 
TerraCool‘s winning system uses near-surface geothermal energy as the most natural form of cooling. It utilises the constant temperature of around 10°C at a depth of around 10 metres below ground. A specially developed heat exchanger system takes advantage of this natural cooling effect. In the future, it will be used to cool chemical production processes at RUDOLF. The main advantage of this technology is that it is CO2 neutral. The technology is highly efficient and consumes only 0.1 % of the electricity used by conventional cooling systems.  By using natural resources, the system reduces CO2 emissions by up to 99.9 % compared to conventional cooling systems, resulting in a very presentable carbon footprint. Another impressive aspect is its high energy efficiency. With just 1 kW of electrical energy, the system generates up to 600 kW of cooling capacity, thanks to the use of a highly energyefficient circulating pump system. Energy is, and will continue to be, a valuable „raw material“ for our industry and one that we need to manage carefully. The system is self-contained and has no contact with groundwater. No environmentally harmful refrigerants or antifreeze are required. With this technology, RUDOLF has made a pioneering contribution to the climate-neutral transformation of the economy, proving that innovative solutions can go hand in hand with environmental protection and sustainability. The Responsible Care award recognises the company‘s commitment to a greener future.

Source:

Rudolf GmbH

06.10.2023

Accelerating Circularity launches Alliance of Chemical Textile Recycling (ACTR) with key members

The mission of Accelerating Circularity is to create new supply chains and business models to turn textile waste into mainstream raw materials. Accelerating Circularity has created a working group, the Alliance of Textile Chemical Recyclers (ACTR), to meet and address the textile industry with a common voice to facilitate accurate information on textile chemical recycling.

“We formed this collective to move chemical recycling technology forward, share common definitions, and address policies in a collaborative way to maximize the elimination of textile waste to landfills and incineration” explained Karla Magruder, Founder and President of Accelerating Circularity. “Chemical recycling technology has many benefits, including quality more similar to virgin fiber and the ability to recycle multiple times.”

ACTR plans to provide the industry with information on how textile chemical recycling can:

The mission of Accelerating Circularity is to create new supply chains and business models to turn textile waste into mainstream raw materials. Accelerating Circularity has created a working group, the Alliance of Textile Chemical Recyclers (ACTR), to meet and address the textile industry with a common voice to facilitate accurate information on textile chemical recycling.

“We formed this collective to move chemical recycling technology forward, share common definitions, and address policies in a collaborative way to maximize the elimination of textile waste to landfills and incineration” explained Karla Magruder, Founder and President of Accelerating Circularity. “Chemical recycling technology has many benefits, including quality more similar to virgin fiber and the ability to recycle multiple times.”

ACTR plans to provide the industry with information on how textile chemical recycling can:

  • offer solutions for diverting textile waste to landfill
  • enable textile to textile recycling versus incineration/landfill
  • provide sustainably sourced/circular materials
  • support brand/retailers/producers in achieving their CO2 reduction targets
  • provide long term price stability and consistent supply of raw materials versus virgin

Members of the Alliance include founding members Eastman, Lenzing, and The LYCRA Company, as well as key innovators Circ®, Sappi, Renewcell, Infinited fiber, Worn Again Technologies, Gr3n, CuRe Technology, and OnceMore® from Sodra.

As a first step, the ACTR (Alliance of Chemical Textile Recycling) is introducing a dictionary of common terms developed to educate the industry on the chemical recycling of textiles.

ADVANSA and Asia Pacific Fibers (APF) launch fibre made from recycled ocean-bound plastic bottles (c) ADVANSA
05.07.2023

ADVANSA and Asia Pacific Fibers (APF) launch fibre made from recycled ocean-bound plastic bottles

ADVANSA and Asia Pacific Fibers (APF) join forces to launch REMOTION®, a premium fibre for sports and activewear, made from recycled ocean-bound plastic bottles with full end-to-end traceability from Prevented Ocean Plastic™. REMOTION® offers a solution for textiles that merges ocean protection with built-in biodegradability. The fibres break-down in marine environments to prevent microplastic pollution of the oceans, a problem which can be the consequence of fibre-shedding from apparel laundry waste-water.

Remotion® offers a solution with various sustainable features such as biodegradability and recyclability, with customized performance features such as anti-bacterial properties and moisture management built-in to the fibre. Moreover, the fibre is also offered in customer curated colours that guarantee very good colour fastness. Thus, this “all-in-one” fibre contributes to a sustainable and healthy environment with savings in water, energy, chemicals, and CO2. The fibre is available in a range of filament and staple options with two variants: REMOTION® Blue made from ocean-bound plastic bottles, REMOTION® Green made from domestic recycled plastic bottles.

ADVANSA and Asia Pacific Fibers (APF) join forces to launch REMOTION®, a premium fibre for sports and activewear, made from recycled ocean-bound plastic bottles with full end-to-end traceability from Prevented Ocean Plastic™. REMOTION® offers a solution for textiles that merges ocean protection with built-in biodegradability. The fibres break-down in marine environments to prevent microplastic pollution of the oceans, a problem which can be the consequence of fibre-shedding from apparel laundry waste-water.

Remotion® offers a solution with various sustainable features such as biodegradability and recyclability, with customized performance features such as anti-bacterial properties and moisture management built-in to the fibre. Moreover, the fibre is also offered in customer curated colours that guarantee very good colour fastness. Thus, this “all-in-one” fibre contributes to a sustainable and healthy environment with savings in water, energy, chemicals, and CO2. The fibre is available in a range of filament and staple options with two variants: REMOTION® Blue made from ocean-bound plastic bottles, REMOTION® Green made from domestic recycled plastic bottles.

REMOTION® Blue is a specially engineered polyester fibre made from ocean-bound plastic as a premium raw material with a social aspect. ADVANSA and APF are cooperating with Prevented Ocean Plastic™, a global recycling initiative that helps tens of thousands of people around the world to clean their coastlines, prevent ocean plastic pollution and earn additional income. Discarded plastic bottles are picked up by plastic collectors from coastal areas at risk of ocean plastic pollution and are taken to collection centres. The plastic bottles are then sorted out, cleaned and processed into raw material flakes which are used as a premium ingredient for REMOTION® Blue range of products.

ADVANSA and Asia Pacific Fibers are launching REMOTION® at the Performance Days in Munich from 3-5 October 2023.

Source:

ADVANSA

23.06.2023

"Keine falschen Anreize für Müllverbrennung als 'grüne' Fernwärme"

  • Bundesverband Sekundärrohstoffe und Entsorgung e.V. bvse wendet sich mit Umweltverbänden an das Bundeswirtschafts- und das -bauministerium
  • Änderungen am Gebäudeenergiegesetz gefordert

Der bvse hat sich in einer fachlichen Stellungnahme deutlich für Änderungen am Gebäudeenergiegesetz ausgesprochen. Der Gesetzentwurf untergrabe die Zielsetzung der Kreislaufwirtschaft, so der bvse-Hauptgeschäftsführer Eric Rehbock. Man habe sich daher bewusst dazu entschlossen, gemeinsam mit Umweltverbänden in einem offenen Brief an Bundeswirtschaftsminister Habeck und Bundesbauministerin Geywitz die Forderungen zu vertreten. Die Gleichsetzung von Abwärme aus Müllverbrennungsanlagen und erneuerbare Energien sei willkürlich, falsch und werde dazu führen, dass wieder mehr Abfälle verbrannt würden und damit mehr CO2 freigesetzt werde. Damit werde das Gegenteil von Klimaschutz erreicht.

Der offene Brief im Wortlaut:

  • Bundesverband Sekundärrohstoffe und Entsorgung e.V. bvse wendet sich mit Umweltverbänden an das Bundeswirtschafts- und das -bauministerium
  • Änderungen am Gebäudeenergiegesetz gefordert

Der bvse hat sich in einer fachlichen Stellungnahme deutlich für Änderungen am Gebäudeenergiegesetz ausgesprochen. Der Gesetzentwurf untergrabe die Zielsetzung der Kreislaufwirtschaft, so der bvse-Hauptgeschäftsführer Eric Rehbock. Man habe sich daher bewusst dazu entschlossen, gemeinsam mit Umweltverbänden in einem offenen Brief an Bundeswirtschaftsminister Habeck und Bundesbauministerin Geywitz die Forderungen zu vertreten. Die Gleichsetzung von Abwärme aus Müllverbrennungsanlagen und erneuerbare Energien sei willkürlich, falsch und werde dazu führen, dass wieder mehr Abfälle verbrannt würden und damit mehr CO2 freigesetzt werde. Damit werde das Gegenteil von Klimaschutz erreicht.

Der offene Brief im Wortlaut:

Bundesminister für Wirtschaft und Klimaschutz
Bundesministerin für Wohnen, Stadtentwicklung und Bauwesen
Mitglieder des Bundestagsausschusses für Klimaschutz und Energie
Mitglieder des Bundestagsausschusses für Wohnen, Stadtentwicklung, Bauwesen und Kommunen
Mitglieder des Bundestagsausschusses für Umwelt, Naturschutz, nukleare Sicherheit und Verbraucherschutz

23.06.2023

Keine falschen Anreize für Müllverbrennung als „grüne“ Fernwärme

Sehr geehrter Herr Bundesminister Habeck,
Sehr geehrte Frau Bundesministerin Geywitz,
Sehr geehrte Ausschussmitglieder,

im gegenwärtig diskutierten Gebäudeenergiegesetz (GEG) sowie im Entwurf des Wärmeplanungsgesetzes (WPG) birgt die Einstufung von Wärme aus der Abfallverbrennung als unvermeidbare Abwärme die Gefahr, den Zielen des Klima- und Ressourcenschutzes zuwiderzulaufen.

Nach § 3 Absatz 1 Nummer 30a GEG würden künftig Wärmenetze, die mit Energie aus der Verbrennung von Abfällen gespeist werden, in vollem Umfang zur Erfüllung der gesetzlich vorgesehenen Anforderungen an Heizungsanlagen (65-Prozent-Vorgabe gemäß § 71 Absatz 1) beitragen. Wärme aus der Müllverbrennung ist jedoch keineswegs unvermeidbar!

Abwärme aus der Müllverbrennung auf eine Stufe mit Wärme aus erneuerbaren Energien zu stellen, würde die massenhafte Vernichtung wertvoller Ressourcen und die damit einhergehende Klimabelastung für viele weitere Jahrzehnte zementieren. Die vorgenommene Einstufung von Wärme aus der thermischen Abfallbehandlung als unvermeidbare Abwärme sollte deshalb aus dem GEG sowie dem WPG gestrichen werden. Wärme aus thermischer Abfallbehandlung muss reduziert statt gefördert werden.

Die Potenziale einer Verbesserung der getrennten Wertstoffsammlung, der Sortierung von Wertstoffen sowie die Nutzung nicht recycelbarer Abfälle als Ersatzbrennstoffe, die fossile Energieträger in höherwertigen energetischen Prozessen ersetzen, können nur ausgeschöpft werden, wenn die Müllverbrennung nicht attraktiver gemacht wird. Derzeit sind immer noch bis zu zwei Drittel des Inhalts der durchschnittlichen Restmülltonne in Deutschland recycelbare Abfälle. Dies sind insbesondere Bioabfälle, aber auch Altpapier, Verpackungsabfälle oder Elektroaltgeräte.

Allein durch den Vollzug bestehender Gesetze (BioabfallVO, VerpackG, GewerbeabfallVO) würden fünf Millionen Tonnen weniger Abfälle verbrannt werden, dies entspricht einer Reduktion der Abfallverbrennungskapazitäten um ein Fünftel (Öko-Institut (2019): Kapazitäten der energetischen Verwertung von Abfällen in Deutschland und ihre zukünftige Entwicklung in einer Kreislaufwirtschaft).

Statt Anreize für eine bessere Abfallgetrenntsammlung zu setzen, würde das GEG sowie das WPG in seiner jetzigen Form gerade jene Kommunen belohnen, die besonders viel Restmüll und somit Müllwärme produzieren.

Auch steht die Anrechnung der Müllwärme als unvermeidbare Abwärme im Widerspruch zum Brennstoffemissionshandelsgesetz (BEHG). Bei der Abfallverbrennung werden in Deutschland jährlich fast 24 Millionen Tonnen CO2 freigesetzt, deren fossile Anteile ab 2024 CO2-bepreist werden. Wieso die Verbrennung von Abfällen, insbesondere von Wertstoffen wie Metalle, Kunststoffe und Papier, angesichts dieser im BEHG hinterlegten CO2-Emissionen nun im Rahmen des GEG sowie des WPG auf eine klimaneutrale Wärmeversorgung einzahlen soll, ist nicht nachvollziehbar.

Die Wärme aus der Verbrennung insbesondere des biogenen Anteils in Abfallverbrennungsanlagen im geplanten GEG sowie im WPG als erneuerbare Energie einzustufen, ist eine weitere Fehlannahme, die Kreislaufwirtschaftsambitionen konterkariert. Auch im BEHG, das mit der Bepreisung von CO2-Emissionen aus der Müllverbrennung einen richtigen Ansatz zu deren Reduktion verfolgt, werden die Emissionen durch die Verbrennung organischen Kohlenstoffs nicht ausreichend berücksichtigt.

Organische Abfälle gehören aufgrund ihres stofflichen Werts als Düngemittel, der auch energetisch deutlich vorteilhafteren sowie klimaschonenderen Behandlungsoption durch Biogasanlagen und ihres hohen Wassergehalts eindeutig nicht in die thermische Verwertung. Im GEG und WPG sollte daher die Abfallverbrennung nicht oder maximal mit einem gesetzlich definierten unvermeidbaren Abfallverbrennungsanteil zur Erfüllung der Vorgaben an die erneuerbare Wärmeversorgung beitragen dürfen.

Der gesetzlich definierte Anteil sollte sich dabei an der niedrigsten in deutschen Kommunen anfallenden spezifischen Restmüllmenge orientieren und regelmäßig angepasst werden. Ansonsten wird es zu der absurden Situation kommen, dass Kommunen auf dem Papier klimaneutrale Wärmenetze betreiben, in Wirklichkeit aber weiterhin vermeidbares (!) CO2 über ihre Abfallverbrennungsanlagen emittieren. Dies kann nicht im Interesse einer ernst gemeinten Klima- und Ressourcenpolitik sein.

Source:

Bundesverband Sekundärrohstoffe und Entsorgung e.V. bvse

(c) TNO/Fraunhofer UMSICHT
02.06.2023

Fraunhofer: New guide to the future of plastics

How does a future-proof, circular and sustainable plastics economy look like? The answer is a balance ranging from plastics reduction to a sustainable use of recyclable plastics. After all, the increasing demand for plastics in high-value applications such as food packaging, car parts or synthetic textiles requires a holistic change. With four strategic approaches, researchers from the German institute Fraunhofer UMSICHT and the Dutch institute TNO now provide insights into how this future scenario could look like in their recently published white paper "From #plasticfree to future-proof plastics". Both organizations also start a hands-on platform for plastics in a circular economy: European Circular Plastics Platform – CPP aimed at removing existing barriers and sharing of promising solutions.

How does a future-proof, circular and sustainable plastics economy look like? The answer is a balance ranging from plastics reduction to a sustainable use of recyclable plastics. After all, the increasing demand for plastics in high-value applications such as food packaging, car parts or synthetic textiles requires a holistic change. With four strategic approaches, researchers from the German institute Fraunhofer UMSICHT and the Dutch institute TNO now provide insights into how this future scenario could look like in their recently published white paper "From #plasticfree to future-proof plastics". Both organizations also start a hands-on platform for plastics in a circular economy: European Circular Plastics Platform – CPP aimed at removing existing barriers and sharing of promising solutions.

Versatile and inexpensive materials with low weight and very good barrier properties: That's what plastics are. In addition to their practical benefits, however, the materials are also associated with a significant share of mankind's greenhouse gas emissions. The production and use of plastics cause environmental pollution and microplastics, deplete fossil resources and lead to import dependencies. At the same time, alternatives - such as glass packaging - could cause even more environmental burden or have poorer product properties.

Researchers from TNO and Fraunhofer UMSICHT have elaborated a white paper that provides a basis for the transformation of plastics production and use. They consider the integration of the perspectives of all stakeholders and their values and the potential of current and future technologies. In addition, the functional properties of the target product, the comparison with alternative products without plastics, and their impact in a variety of environmental, social and economic categories over the entire life cycle are crucial. In this way, a systematic assessment and ultimately a systematic decision as to where we can use, reject or replace plastics can be realized.

Strategies for the Circular Economy
As a result, the researchers describe four strategic approaches for transforming today's largely linear plastics economy into a fully circular future: Narrowing the Loop, Operating the Loop, Slowing the Loop, and Closing the Loop. By Narrowing the Loop, the researchers recommend, as a first step, to reduce the amount of materials mobilized in a circular economy. Operating the Loop refers to using renewable energy, minimizing material losses, and sourcing raw materials sustainably. For Slowing the Loop, measures are needed to extend the useful lifetime of materials and products. Finally, for Closing the Loop, plastics must be collected, sorted and recycled to high standards.

Individual strategies fall under each of the four approaches. While the ones under Operating the Loop (O strategies) should be applied in parallel and as completely as possible. According to the researchers, the decision for the strategies in the other fields (R strategies) requires a complex process: “Usually, more than one R-strategy can be considered for a given product or service. These must be carefully compared in terms of their feasibility and impact in the context of the status quo and expected changes”, explains Jürgen Bertling from Fraunhofer UMSICHT. The project partners have therefore developed a guiding principle for prioritization based on the idea of the waste hierarchy.

A holistic change, as we envision it, can only succeed if science, industry, politics and citizens work together across sectors. “This implies several, partly quite drastic changes at 4 levels: legislation and policy, circular chain collaboration, design and development, and education and information. For instance, innovations in design and development include redesign of polymers to more oxygen rich ones based on biomass and CO2 utilisation. Current recycling technologies have to be improved for high quantity and quality recycling,” explains Jan Harm Urbanus from TNO.

Hands-on platform for cross-sector collaboration
“Therefore, in a next step, TNO and Fraunhofer UMSICHT are building a hands-on platform for plastics in a circular economy: European Circular Plastics Platform – CPP," explains Esther van den Beuken, Principal Consultant from TNO. It will give companies, associations and non-governmental organizations the opportunity to work together on existing barriers and promising solutions for a Circular Plastics Economy. The platform will also offer its members regular hands-on workshops on plastics topics, roundtable discussions on current issues, and participation in multi-client studies on pressing technical challenges. Regular meetings will be held in the cross-border region of Germany and the Netherlands as well as online. The goal is to bring change to the public and industry.

Source:

Fraunhofer UMSICHT

(c) Sappi Europe
18.05.2023

Sappi at ITMA 2023

As a global provider of sustainable woodfibre products, Sappi will be showcasing its solutions for the garment industry under the theme “Fashion meets Forest” at ITMA 2023 – with sublimation papers and its dissolving wood pulp, used for the production of garment fibres under the “Verve” brand name.

How can the woodfibre industry support a more sustainable garments market? Sappi is eager to answer this question at the ITMA and has created a “knowledge trail” for visitors to explore under the motto “Fashion meets Forest”. Visitors to the stand can follow the journey from wood via cellulose and fibre to the finished yarn and the printed garment.

Sublimation papers: Expanded production capacity in Carmignano
Sappi’s Transjet sublimation papers stand for fast, uniform ink transfer and minimal ink consumption. As a premium supplier, Sappi is constantly striving to meet its customers’ needs. So, at this year’s ITMA, various sublimation papers with optimised qualitative properties will be on show.

As a global provider of sustainable woodfibre products, Sappi will be showcasing its solutions for the garment industry under the theme “Fashion meets Forest” at ITMA 2023 – with sublimation papers and its dissolving wood pulp, used for the production of garment fibres under the “Verve” brand name.

How can the woodfibre industry support a more sustainable garments market? Sappi is eager to answer this question at the ITMA and has created a “knowledge trail” for visitors to explore under the motto “Fashion meets Forest”. Visitors to the stand can follow the journey from wood via cellulose and fibre to the finished yarn and the printed garment.

Sublimation papers: Expanded production capacity in Carmignano
Sappi’s Transjet sublimation papers stand for fast, uniform ink transfer and minimal ink consumption. As a premium supplier, Sappi is constantly striving to meet its customers’ needs. So, at this year’s ITMA, various sublimation papers with optimised qualitative properties will be on show.

Sappi maintains the high quality of its coated Transjet and uncoated Basejet sublimation papers by regularly investing in new, state-of-the-art technologies. At the end of April, a new warehouse has been inaugurated at the Carmignano mill in Italy. In the next month’s, Sappi will further invest in two new converting machines with a width of 1.9 meters and 3.2 meters as well as in a fully automated packaging line. All the investments will support the company’s vision of having a complete in-house solution for the sublimation industry, have a positive impact on CO2 emission, satisfy the increased demand of their customers as well as further improve lead times.
 
“Verve” dissolving wood pulp for high-quality textiles
Sappi will also be showcasing its dissolving pulp (DP) brand “Verve”. DP provides the feedstock raw material toward producing rayon fibres such as Lyocell and viscose and further into yarns and fabrics. Textiles produced from wood based cellulosic fibres are noted for their breathability, colour fastness, softness, drape, absorbency and biodegradability. In addition to the garment industry, dissolving pulp is also used in various household and pharmaceutical products.

Source:

Sappi Europe

25.04.2023

IVC und ZVO üben scharfe Kritik an Brüssel und Berlin

Was einst als deutscher Erfindungsgeist und deutsche Ingenieurskunst für Wohlstand und Wirtschaftswachstum sorgte, werde bald Geschichte sein. Grundlegende wirtschaftliche Rahmenbedingungen am Wirtschaftsstandort Deutschland seien nicht mehr gegeben: verbieten, abschalten, verlagern heiße die neue Maxime, mit der Brüssel und Berlin nicht nur dem Mittelstand die Luft zum Atmen nehmen.

Was einst als deutscher Erfindungsgeist und deutsche Ingenieurskunst für Wohlstand und Wirtschaftswachstum sorgte, werde bald Geschichte sein. Grundlegende wirtschaftliche Rahmenbedingungen am Wirtschaftsstandort Deutschland seien nicht mehr gegeben: verbieten, abschalten, verlagern heiße die neue Maxime, mit der Brüssel und Berlin nicht nur dem Mittelstand die Luft zum Atmen nehmen.

Der Geschäftsführer der Industrievereinigung Chemiefaser e.V., Dr. Wilhelm Rauch, und der Ressortleiter Umwelt-& Chemikalienpolitik des Zentralverbandes Oberflächentechnik e.V., Dr. Malte M. Zimmer sind sich einig in der Beurteilung der aktuellen Situation und haben mit der Aussage „Deutschland verabschiedet sich aus der 1. Liga“ einen wirtschaftspolitischen Weckruf gestartet. Deutschland sei im Abstiegskampf – allerdings finde sich anscheinend weder auf der Trainerbank noch im Management irgendjemand, der ein Interesse hätte, das aufzuhalten. Wenn das Durchreichen in die „Vierte Welt-Liga“ nicht generell durch eine sofortige politische Richtungsänderung aufgehalten werde, verliere Deutschland nicht nur weiter im Klima- und Umweltschutz oder bei den Fachkräften, sondern die Gesellschaft als Ganzes die Grundlagen ihrer Existenz und damit auch ihren gesellschaftlichen Zusammenhalt.

Von der – noch – viertgrößten Wirtschaftsnation der Welt werde es künftig ein Hauptexportgut geben: neben dem bereits erfolgten technologischen Aderlass drehten zunehmend Unternehmen, Forschende und Fachkräfte Deutschland den Rücken und wanderten in Länder ab, die die dringend notwendigen Bedingungen für Innovationen und wettbewerbsorientiertes Wirtschaften böten. Während global agierende Konzerne diese Schritte öffentlich meist unbemerkt längst eingeleitet haben, bliebe vor allem inhabergeführten Familienunternehmen nur noch wenig Zeit. In der Chemiefaserindustrie produzieren seit 2021 mehr als ein Drittel der Unternehmen in Deutschland nicht mehr oder haben ihre Produktion für immer geschlossen.

Nach der Energiekrise im vergangenen Jahr und den Erfahrungen aus der Coronazeit, die drastisch die unmittelbare Gefahr von Abhängigkeiten illustriert haben, sollte zu erwarten gewesen sein, dass seitens der Politik entsprechende Vorkehrungen getroffen werden, um das künftig zu verhindern. Weit gefehlt: eine verbotsorientierte Chemikalienpolitik, die die Substitution chemischer Stoffe zum Dogma der europäischen Politik gemacht hat, erreicht mit dem Green Deal und der Revision von REACH neue und immer größere planwirtschaftliche Höhenflüge.

Großtechnische Anlagen zur Produktion erneuerbarer Energien wie grünem Wasserstoff und Biogas oder Windkraftflügel aus Carbonfasern würden zukünftig sicher irgendwo hergestellt - in Europa nicht. Die dafür benötigten Textilmembranen und Carbonfasergewirke stehen bald auf der REACH-Verbotsliste. Der deutsche Weg zur CO2-Neutralität werde ein steiniger sein, wenn die ältesten Kohlekraftwerke wieder angeschaltet würden und alsbald jede noch verbliebene CO2-freie Technologie, von Windkraft, Solar über Wärmepumpen zu Biogas, in der Herstellung und im Betrieb über das EU-Chemikalien- und Stoffrecht in Deutschland verboten sein wird. Alsbald werde Deutschland nicht mehr im Stande sein, die Veredlungssubstanzen für Fasern bzw. textile Abluftfilter für den Umweltschutz herstellen zu dürfen, geschweige denn ein langzeithaltbares Kugellager für eine Windkraftturbine oberflächenzuveredeln.

Was mit der Photovoltaik (PV)-Technologie bereits hervorragend funktioniert habe, so Rauch und Zimmer, klappe jetzt auch bei anderen Technologien: Abhängigkeiten von Dritten. 2010/11 war Deutschland der Innovationstreiber in der PV-Technologie. Schon in den folgenden drei Jahren sank die Zahl der Arbeitsplätze von 150.000 auf rund 30.000. Im Jahr 2023 werden 80 % der Solarzellen und 98 % der weltweit verwendeten Wafer aus dem Weltmarktführer China kommen. Den von der EU geplanten “European Chips-Act“ zur Reduzierung der Abhängigkeit von Asien werde es allein deshalb nicht geben können, weil die dazu notwendigen Prozesse und Rohstoffe in Summe aller avisierten Verbote in der EU nicht mehr erlaubt sind.

Berücksichtigt man zusätzlich, dass China die zweitgrößte Volkswirtschaft der Welt, Exportweltmeister vor den USA und Deutschland sowie einer der wichtigsten Akteure auf den globalen Finanzmärkten ist, verwundert es doch, dass Deutschland an das offiziell weiter als Entwicklungsland eingestufte Land 2020 473,4 Millionen Euro an Entwicklungshilfe zahlte.

Die drei Kernforderungen beider Verbände lauten:

  • Wir brauchen umgehend eine Wirtschaftspolitik für und nicht gegen die in Deutschland und Europa produzierenden Unternehmen, für die darin beschäftigten Menschen und für den Umwelt- und Klimaschutz.
  • Wir brauchen wieder eine intensive technologie- und ergebnisoffene Diskussion zwischen Fachleuten, politisch Verantwortlichen und Behörden zum Erreichen wirtschaftlicher, sicherheitspolitischer und klimatischer Ziele - und damit die Abkehr von einem Ideologie-dominierten planwirtschaftlichen Gesellschaftsentwurf.
  • Innovationsprozesse, die den Einklang zwischen Ökonomie und Ökologie mittels technischer Lösungen verbessern können, müssen wieder gangbar gemacht und die Rahmenbedingungen für erfolgreiches internationales Wirtschaften geschaffen werden.

„Es ist Zeit für weniger Ideologie und mehr Wissen in Deutschland und in Europa“, schließen die Verbandsvertreter ihr Statement.

(c) Beste Spa
01.02.2023

Beste x HeiQ AeoniQ™ launch first collection

Beste x HeiQ AeoniQ™ announce their partnership with the launch of a capsule in the CARPINI collection at Milano Unica. The fabrics including HeiQ AeoniQ™ are crafted by the Italian textiles manufacturer Beste, well known for supplying high-end fabrics for premium and luxury brands.

The fabrics capsule collection for S/S 24 includes 12 articles made with 100% HeiQ AeoniQ™, linen, and HeiQ AeoniQ™ blends, and cotton and HeiQ AeoniQ™ blends in several different proportions.
The collection is named FLOW, as related to the movement of water and air to be in tune with Nature’s balance and rhythm, with a color range including hay, black, water, caramel, violet, dust, denim, lime, and cobalt.

With this initiative, Beste becomes the first partner to incorporate the HeiQ AeoniQ™ fiber into its active fabric portfolio, and also its Tessuteka, the library that keeps all the fabrics produced by the company since 1993.

Beste x HeiQ AeoniQ™ announce their partnership with the launch of a capsule in the CARPINI collection at Milano Unica. The fabrics including HeiQ AeoniQ™ are crafted by the Italian textiles manufacturer Beste, well known for supplying high-end fabrics for premium and luxury brands.

The fabrics capsule collection for S/S 24 includes 12 articles made with 100% HeiQ AeoniQ™, linen, and HeiQ AeoniQ™ blends, and cotton and HeiQ AeoniQ™ blends in several different proportions.
The collection is named FLOW, as related to the movement of water and air to be in tune with Nature’s balance and rhythm, with a color range including hay, black, water, caramel, violet, dust, denim, lime, and cobalt.

With this initiative, Beste becomes the first partner to incorporate the HeiQ AeoniQ™ fiber into its active fabric portfolio, and also its Tessuteka, the library that keeps all the fabrics produced by the company since 1993.

For Carlo Centonze, HeiQ’s CEO “the partnership with Beste makes total sense for all the values embodied by HeiQ AeoniQ™ that we both share, namely its commitment to circular ethics, practice and promote sustainability, and have a positive impact in the environment while also creating new business opportunities that the market and the Planet so urgently need.”

According to Giovanni Santi, Beste’s CDA president: “Beste SpA benefit company is strongly committed to developing a positive and responsible impact over the environment and the social fabric it is surrounded by. To meet this precise criterion, we use HeiQ AeoniQ™, a new biodegradable fiber developed by HeiQ, a Swiss chemical company that is Beste's constant partner in this indispensable green revolution. The introduction of HeiQ AeoniQ™, namely a fiber that is cellulosic in nature but with characteristics and performances similar to polyester ones, concerns a significant step in the reduction of CO2 emissions and plastics. It is not only a responsible choice, but it also deals with a precise and courageous positioning in the constant battle in favor of our planet by starting from the textile innovation front.”

The new Beste x HeiQ AeoniQ™ fabrics will be displayed at Beste’s booth during the Milano Unica trade show from January 31st to February 2nd, in Milan, Italy.

More information:
HeiQ AeoniQ Beste Milano Unica
Source:

HeiQ

(c) nova-Institut GmbH
24.01.2023

Six nominees for„Cellulose Fibre Innovation of the Year 2023“

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

Here are the six nominees
Vybrana – The new generation banana fibre – GenCrest Bioproducts (India)

Vybrana is a Gencrest’s Sustainable Cellulosic Fibre upcycled from agrowaste. Raw fibres are extracted from the Banana Pseudo stem at the end of the plant lifecycle. The biomass waste is then treated by the Gencrest patented Fiberzyme technology. Here, cocktail enzyme formulations remove the high lignin content and other impurities and help fibre fibrillation. The company's proprietary cottonisation process provides fine, spinnable cellulose staple fibres suitable for blending with other staple fibres and can be spun on any conventional spinning systems giving yarns sustainable apparel. Vybrana is produced without the use of heavy chemicals and minimized water consumption and in a waste-free process where balance biomass is converted to bio stimulants Agrosatva and Bio Fertilizers & organic manure.

HeiQ AeoniQ™ – technology for more sustainability of textiles – HeiQ (Austria)
HeiQ AeoniQ™ is the disruptive technology and key initiative from HeiQ with the potential to change the sustainability of textiles. It is the first climate-positive continuous cellulose filament yarn, made in a proprietary manufacturing process and the first to reproduce the properties of polyester and nylon yarns in a cellulosic, biodegradable, and endlessly recyclable fibre.
HeiQ AeoniQ™ can be manufactured from different cellulosic raw materials such as pre- and post-consumer textile waste, biotech cellulose, and non-valorized agricultural waste, such as ground coffee waste or banana peels. It naturally degrades after only 12 weeks in the soil. Each ton of HeiQ AeoniQ™ saves 5 tons of CO2 emissions. The first garments made with this innovative cellulosic filament fiber were commercially launched in January 2023.

TENCEL™ LUXE – lyocell filament yarn – Lenzing (Austria)
TENCEL™ LUXE is LENZING’s new versatile lyocell yarn that offers an urgently needed sustainable filament solution for the textile and fashion industry. A possible botanical alternative for silk, long-staple cotton, and petrol-based synthetic filaments, is derived from wood grown in renewable, sustainably managed forests, and produced in an environmentally sound, closed-loop process that recycles water and reuses more than 99 % of organic solvent. Certified by The Vegan Society, it is suitable for a wide range of applications and fabric developments, from finer high fashion propositions to denim constructions, seamless and activewear innovations, and even agricultural and technical solutions.

Nullarbor™ – Nanollose & Birla Cellulose (Australia/India)
In 2020, Nanollose & Birla Cellulose started a journey to develop and commercialize tree-free lyocell from bacterial cellulose, called Nullarbor™. The name derives from the Latin “nulla arbor” which means “no trees”. Initial lab research at both ends led to a joint patent application with the patent “production of high-tenacity lyocell fibres made from bacterial cellulose”.
Nullarbor is significantly stronger than lyocell made from wood-based pulp; even adding small amounts of bacterial cellulose to wood pulp increases the fibre toughness. In 2022, the first pilot batch of 260kg was produced with 20 % bacterial pulp share. Several high-quality fabrics and garments were produced with this fibre. The collaboration between Nanollose & Birla Cellulose now focuses on increasing the production scale and amount of bacterial pulp in the fibre.

Circulose® – makes fashion circular – Renewcell (Sweden)
Circulose® made by Renewcell is a branded dissolving pulp made from 100 % textile waste, like worn-out clothes and production scraps. It provides a unique material for fashion that is 100 % recycled, recyclable, biodegradable, and of virgin-equivalent quality. It is used by fibre producers to make staple fibre or filaments like viscose, lyocell, modal, acetate or other types of man-made cellulosic fibres. In 2022, Renewcell, opened the world’s first textile-to-textile chemical recycling plant in Sundsvall, Sweden – Renewcell 1. The plant will eventually reach 120,000 tons of annual capacity.

Sparkle sustainable sanitary pads – Sparkle Innovations (United States)
Globally, around 300 billion period products are discarded every year, resulting in millions of tons of non-biodegradable waste. Since most conventional sanitary pads contain up to 90 % plastics, they do not biodegrade for around 600 years. Sparkle has designed sustainable, plastic-free, biodegradable and compostable Sparkle sanitary pads. From product to packaging, they are made up of around 90 % cellulose-based materials with top sheet, absorbent core, release paper, wrapping paper and packaging made of cellulose-based fibres. Whether Sparkle pads end up in a compost pit, are incinerated or end up in a landfill, they are a more sustainable alternative compared to conventional pads that contain large amounts of plastics, complex petro-chemical based ingredients and artificial fragrances. When tested according to ISO 14855-1 by a leading independent lab in Europe, Sparkle pads reached over 90 % absolute biodegradation within 90 days in commercial composting conditions.

(c) Madewell / ISKO
25.10.2022

Madewell launches denim with ISKO fabrics that are bluesign® APPROVED

Madewell has created a denim style using bluesign® APPROVED ISKO fabrics, prioritizing sustainability in the production of a pair of women’s denim jeans. The jeans are made with ISKO’s fabrics that are dyed and finished with bluesign® APPROVED chemical products and produced in a resource-conserving way with a minimum impact on people and the environment. ISKO’s Reform™ technology, one of the denim ingredient brand’s most successful patented stretch innovations, has obtained bluesign® APPROVED status, which is a unique challenge for a denim mill.

The bluesign® APPROVED label is awarded only to the bluesign® SYSTEM PARTNER manufacturers that meet the strict safety and environmental requirements of the bluesign® CRITERIA, such as ensuring production sites are safe for workers, reducing CO2e emissions and water consumption, as well as avoiding hazardous substances in production among many others.

Madewell has created a denim style using bluesign® APPROVED ISKO fabrics, prioritizing sustainability in the production of a pair of women’s denim jeans. The jeans are made with ISKO’s fabrics that are dyed and finished with bluesign® APPROVED chemical products and produced in a resource-conserving way with a minimum impact on people and the environment. ISKO’s Reform™ technology, one of the denim ingredient brand’s most successful patented stretch innovations, has obtained bluesign® APPROVED status, which is a unique challenge for a denim mill.

The bluesign® APPROVED label is awarded only to the bluesign® SYSTEM PARTNER manufacturers that meet the strict safety and environmental requirements of the bluesign® CRITERIA, such as ensuring production sites are safe for workers, reducing CO2e emissions and water consumption, as well as avoiding hazardous substances in production among many others.

More information:
Isko bluesign® Madewell Denim
Source:

ISKO

19.10.2022

Kornit Digital issues Second-Annual Impact Report

Kornit Digital Ltd. unveiled its Impact Report for 2021 highlighting progress made against goals and further expanding its commitment to a long-term strategy designed to transform the world of fashion and textiles into one that is more sustainable. The comprehensive analysis details Kornit’s performance related to climate action, waste management, green chemistry, and diversity in the workplace, as well as other areas of the Company’s Environmental, Social, and corporate Governance (ESG) framework.

Key Accomplishments Against Baseline (2021)  
Kornit’s ongoing dedication to improving ESG practices within its own operations has resulted in Company-wide achievements in the areas of:

Climate Action and Waste Management*

  • ~16% reduction in GHG emissions intensity from x 9.11-e to 7.68 MTCO2-e
  • 39% reduction in hazardous waste intensity from 1.7 tons to 1.04 tons
  • 57% reduction in non-hazardous waste intensity from 33 tons to 14 tons

Green Chemistry

Kornit Digital Ltd. unveiled its Impact Report for 2021 highlighting progress made against goals and further expanding its commitment to a long-term strategy designed to transform the world of fashion and textiles into one that is more sustainable. The comprehensive analysis details Kornit’s performance related to climate action, waste management, green chemistry, and diversity in the workplace, as well as other areas of the Company’s Environmental, Social, and corporate Governance (ESG) framework.

Key Accomplishments Against Baseline (2021)  
Kornit’s ongoing dedication to improving ESG practices within its own operations has resulted in Company-wide achievements in the areas of:

Climate Action and Waste Management*

  • ~16% reduction in GHG emissions intensity from x 9.11-e to 7.68 MTCO2-e
  • 39% reduction in hazardous waste intensity from 1.7 tons to 1.04 tons
  • 57% reduction in non-hazardous waste intensity from 33 tons to 14 tons

Green Chemistry

  • Complete elimination of Acute Toxic Amines (CLP category 1, 2, 3) CMR
  • 20% reduction of VOC level in Robusto Inkset and 30% of VOC in Eco Ink/Green

DEI and Community Engagement

  • An increase in women in management, from 30% to 35%
  • Reporting 88% of employees feeling respected and free to be authentic at work - *Intensity measures are per $1 million of revenue.

Kornit Digital’s Impact Strategy
Propelled by an ambition to make a positive impact across all areas of its business and throughout the fashion and textile industries, Kornit further adjusted its Impact Strategy this year towards more expansive, longer-term goals and objectives. Kornit’s refined strategy reflects the Company's dual role as a change agent in the industry—both as a leader empowering the fashion industry to be more sustainable, and as an accountable participant responsible for embracing social and environmental change to make the world a better place.  
The holistic strategy accounts for both roles, across two fundamental pillars—"Enable the Change” and “Be the Change”—and incorporates both social and environmental KPIs designed to meet the Company’s goals and respond to stakeholders’ input, as well as industry and ecosystem needs

Kornit is officially unveiling the report during a press event at PRINTING United Expo 2022.

*Intensity measures are per $1 million of revenue.

Source:

Kornit Digital

12.10.2022

PCG completes acquisition of Perstorp

Perstorp has been acquired by PETRONAS Chemicals Group Berhad (PCG), Malaysia´s leading integrated chemicals provider and part of PETRONAS Group, on 11 October 2022.

In May this year, PCG signed a Securities Purchase Agreement with Financière Forêt S.à.r.l, a company under PAI Partners, a European private equity firm, to acquire the entire equity interest in Perstorp, a leading sustainability-driven global specialty chemicals company based in Sweden. With the completion of the acquisition, Perstorp is now PCG’s wholly-owned subsidiary.

Perstorp has been acquired by PETRONAS Chemicals Group Berhad (PCG), Malaysia´s leading integrated chemicals provider and part of PETRONAS Group, on 11 October 2022.

In May this year, PCG signed a Securities Purchase Agreement with Financière Forêt S.à.r.l, a company under PAI Partners, a European private equity firm, to acquire the entire equity interest in Perstorp, a leading sustainability-driven global specialty chemicals company based in Sweden. With the completion of the acquisition, Perstorp is now PCG’s wholly-owned subsidiary.

PCG will strive to ensure the timely completion of Perstorp’s growth projects in a safe and cost-effective manner. Perstorp has several projects lined up in the near future, including the launch of Project Air which aims to reduce carbon emissions through the production of sustainable methanol. Recently, The European Union Innovation Fund selected Project Air, as one of the 17 large-scale green tech projects, which together will be granted more than EUR 1.8 billion. Project Air is a gamechanger for the chemical industry, moving from fossil raw materials to recycled and bio-based feedstock, thereby enabling sustainable chemical products to a large variety of industries and end products. At full capacity, it will reduce global CO2 emissions with close to 500,000 metric tons per year from today’s levels, corresponding to one percent of current emissions in Sweden.

More information:
Perstorp PCG
Source:

EMG for Perstorp

(c) Lenzing AG
03.10.2022

Lenzing: Ground-mounted photovoltaic system becomes operational

The Lenzing Group and VERBUND, an energy transition company, launched the first development stage of the largest ground-mounted photovoltaic system in Upper Austria. Together with its energy partner VERBUND, Lenzing is also paving the way for the transition to zero-emission mobility. The installation of electric vehicle charging infrastructure at the company’s premises underlines Lenzing’s commitment to the energy transition process.

The Lenzing Group and VERBUND, an energy transition company, launched the first development stage of the largest ground-mounted photovoltaic system in Upper Austria. Together with its energy partner VERBUND, Lenzing is also paving the way for the transition to zero-emission mobility. The installation of electric vehicle charging infrastructure at the company’s premises underlines Lenzing’s commitment to the energy transition process.

Thanks to the ground-mounted photovoltaic system at the “Ofenloch” landfill site, Lenzing, in conjunction with VERBUND, is consistently moving forward on the path to a carbon-free energy supply and has commissioned the first half of the new photovoltaic system with a peak power of 2,780 kWp. Full commissioning of the system with a peak power of 5,560 kWp is envisaged in mid-October. Annual electricity production will amount to 6,000,000 kWh, which is expected to cut CO2 emissions by some 4,400 tonnes per year. The Austrian pioneer in fiber production already commissioned three rooftop photovoltaic systems in spring/summer of 2022, with a peak power of 1,454 kWp and annual electricity production of some 1,508,000 kWh. The electricity flows directly into the company’s on-site production and will also power electric charging stations in future. In the first development stage, 16 wallboxes are set to be installed by the end of the year. A further 32 charging points are planned for 2023. The charging stations will be accessible to staff, visitors and the company’s own vehicle fleet.

“VERBUND’s photovoltaic operator model allows us to make the transition to solar power without incurring investment costs or risks. Thanks to the constant expansion in renewable energy, we remain on course to ecologize the value chain, while optimizing our carbon footprint, cutting costs and reducing the load on the grid, as we are using nearly 100 percent of photovoltaic power in our production,” explains Christian Skilich, Chief Pulp Officer of the Lenzing Group.

More information:
Lenzing energy consumption CO2
Source:

Lenzing AG