From the Sector

Reset
7 results
15.05.2024

Shima Seiki with Temco Argentina at SIMATEX 2024

Flat knitting technologist SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Argentinian representative TEMCO ARGENTINA S.A., will participate in the SIMATEX exhibition in Buenos Aires, Argentina (21st - 23rd May 2024).

SHIMA SEIKI will exhibit a wide range of products, including proposals in seam-free WHOLEGARMENT® knitting technology as an alternative to labor-intensive manufacturing in the South American market. Three MACH2®VS machines, capable of knitting WHOLEGARMENT® knitwear using every other needle, will be shown in 12, 16 and 18 gauge. N.SVR®122, shown in 5 gauge, is the industry benchmark for shaped knitting, featuring such innovations as the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinkers, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb.

Flat knitting technologist SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Argentinian representative TEMCO ARGENTINA S.A., will participate in the SIMATEX exhibition in Buenos Aires, Argentina (21st - 23rd May 2024).

SHIMA SEIKI will exhibit a wide range of products, including proposals in seam-free WHOLEGARMENT® knitting technology as an alternative to labor-intensive manufacturing in the South American market. Three MACH2®VS machines, capable of knitting WHOLEGARMENT® knitwear using every other needle, will be shown in 12, 16 and 18 gauge. N.SVR®122, shown in 5 gauge, is the industry benchmark for shaped knitting, featuring such innovations as the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinkers, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb.

Demonstrations will be performed on SHIMA SEIKI's SDS®-ONE APEX4 design system. SDS®-ONE APEX4 provides support throughout the supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to machine programming, production and even sales promotion. Especially effective is the way SDS®-ONE APEX4 improves on the product planning and design evaluation process by replacing physical samples with digital prototypes based on photo-realistic simulations. These virtual samples realize significant savings in time, cost and material, contributing to sustainable manufacturing.

More information:
Shima Seiki Temco Argentina
Source:

SHIMA SEIKI MFG., LTD.

Monforts: Solid Success at ITMA 2023 Photo: Monforts / AWOL Media
07.07.2023

Monforts: Solid Success at ITMA 2023

Finishing machinery specialist Monforts has secured a number of major orders from textile manufacturers in Central and South America recently, and was pleased to welcome a high number of visitors from the region to its stand at ITMA 2023 in Milan from June 8-14.

Among new orders are those for three Montex stenters delivered to the AustralTex Group in Argentina and a further Montex range to denim manufacturer CIT in Brazil. Guatemala’s Global Textiles placed an order for its second Montex stenter, while Mexico’s Zentrix ordered its third and Avante, also in Mexico, has opted for its sixth.

Elsewhere, orders have also been placed for the delivery of three new Montex stenters to one of Pakistan’s major corporations, as well as a new Thermex dyeing range to nonwovens manaufacturer Orsa in Italy. Further orders – both for new machines and retrofit modules – are now anticipated following ITMA 2023, which attracted over 111,000 visitors to Milan.

Finishing machinery specialist Monforts has secured a number of major orders from textile manufacturers in Central and South America recently, and was pleased to welcome a high number of visitors from the region to its stand at ITMA 2023 in Milan from June 8-14.

Among new orders are those for three Montex stenters delivered to the AustralTex Group in Argentina and a further Montex range to denim manufacturer CIT in Brazil. Guatemala’s Global Textiles placed an order for its second Montex stenter, while Mexico’s Zentrix ordered its third and Avante, also in Mexico, has opted for its sixth.

Elsewhere, orders have also been placed for the delivery of three new Montex stenters to one of Pakistan’s major corporations, as well as a new Thermex dyeing range to nonwovens manaufacturer Orsa in Italy. Further orders – both for new machines and retrofit modules – are now anticipated following ITMA 2023, which attracted over 111,000 visitors to Milan.

“Visitor footfall at ITMA 2023 was well beyond the company’s expectations, and we were especially pleased at the constant number of visitors from South American companies, as well as from Asia and Europe,” said Monforts Marketing Manager Nicole Croonenbroek. “We were able to provide them with detailed information about our portfolio of machines and technologies digitally and fielded an unprecedented number of serious enquiries, many of which promise to turn into new business.”

Monforts Montex stenters for processes such as drying, stretching, heat-setting and coating, she added, are already the industry standard for the fabric finishing industry, providing a number of advantages in terms of production throughput and especially in energy efficiency and resource savings. Other key technologies in the Monforts portfolio include relaxation dryers, Thermex dyeing ranges and Monfortex compressive shrinking ranges.

Montex®Coat
“We were also very pleased with the interest in the Montex®Coat, the latest addition to our range of technologies, which we displayed in Milan,” Croonenbroek said.

The Montex®Coat can serve a very diverse number of markets and enables full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments, as well as solvent coatings. Knife coating, roller coating or screen printing can also all be accommodated with this system. It provides the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

Many refinements have been made to the Montex®Coat in the past few years, resulting in higher coating accuracy and the resulting quality of the treated fabrics. A number of advanced new improvements were introduced in Milan, including automatic edge limiters for immediately adapting to new coating widths and a new and simplified hand-held control device. These save considerable time in setting up the machine and ensuring consistent production.

The Montex®Coat unit displayed in Milan was sold to Vietnamese company Thai Tuan during the show.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

(c) SHIMA SEIKI MFG., LTD
18.05.2022

SHIMA SEIKI to exhibit at SIMATEX 2022

Computerized knitting machine manufacturer SHIMA SEIKI MFG., LTD. will participate in the SIMATEX exhibition in Buenos Aires, Argentina from 30th of May - 2nd of June 2022.

SHIMA SEIKI will exhibit a wide range of its products, including proposals in seam-free WHOLEGARMENT® knitting technology that offers an alternative to labor-intensive manufacturing in the South American market. Three MACH2VS machines, capable of knitting WHOLEGARMENT® knitwear using every other needle, will be shown in 12, 16 and 18 gauge configurations. The N.SVR workhorse series improves on the SVR series, resetting the industry benchmark for shaped knitting. The N.SVR123SP featuring a special loop presser bed that can produce hybrid inlay fabrics with both knit and weave characteristics. Shown in 18 gauge at the SHIMA SEIKI booth, N.SVR123SP will also feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch for even greater diversity in knit design. N.SSR112 improves on the SSR series and continues to offer industry-leading technology in an economical yet reliable package made in Japan.

Computerized knitting machine manufacturer SHIMA SEIKI MFG., LTD. will participate in the SIMATEX exhibition in Buenos Aires, Argentina from 30th of May - 2nd of June 2022.

SHIMA SEIKI will exhibit a wide range of its products, including proposals in seam-free WHOLEGARMENT® knitting technology that offers an alternative to labor-intensive manufacturing in the South American market. Three MACH2VS machines, capable of knitting WHOLEGARMENT® knitwear using every other needle, will be shown in 12, 16 and 18 gauge configurations. The N.SVR workhorse series improves on the SVR series, resetting the industry benchmark for shaped knitting. The N.SVR123SP featuring a special loop presser bed that can produce hybrid inlay fabrics with both knit and weave characteristics. Shown in 18 gauge at the SHIMA SEIKI booth, N.SVR123SP will also feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch for even greater diversity in knit design. N.SSR112 improves on the SSR series and continues to offer industry-leading technology in an economical yet reliable package made in Japan.

Demonstrations will be performed on SHIMA SEIKI's SDS®-ONE APEX4 design system. At the core of the company’s “Total Fashion System” concept, SDS®-ONE APEX4 provides comprehensive support throughout the production supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to production and even sales promotion. Especially effective is the way SDS®-ONE APEX4 improves on the design evaluation process with its ultra-realistic simulation capability, whereby virtual samples minimize the need for actual sample-making. This realizes significant savings in time, cost and material, contributing to sustainable manufacturing.

Source:

SHIMA SEIKI MFG., LTD

JEC Summit Sports & Health - Connect exceeds goals and sets new standards for JEC digital events
JEC Summit Sports & Health - Connect
15.12.2020

JEC Summit Sports & Health - Connect exceeds goals and sets new standards for JEC digital events

First edition of JEC Summit Sports & Health – Connect, an online event platform devoted to medical and sports equipment manufacturers using composites, ended last week going above and beyond its set goals. JEC Summit Sports & Health – Connect brought together professionals from the whole composites value chain and allows decision-makers to evolve and inspire through a subsequent event program. This summit was the first in a long line of events devoted to composites in the Sports and Health industry that are to come within the next two years.

The three-day event was conceived as a forum to gather composites professionals, affiliates, and high-profile speakers to share their expertise in composites materials involved in creating state-of-the-art medical devices and sports equipment.

First edition of JEC Summit Sports & Health – Connect, an online event platform devoted to medical and sports equipment manufacturers using composites, ended last week going above and beyond its set goals. JEC Summit Sports & Health – Connect brought together professionals from the whole composites value chain and allows decision-makers to evolve and inspire through a subsequent event program. This summit was the first in a long line of events devoted to composites in the Sports and Health industry that are to come within the next two years.

The three-day event was conceived as a forum to gather composites professionals, affiliates, and high-profile speakers to share their expertise in composites materials involved in creating state-of-the-art medical devices and sports equipment.

“Following the enforced postponement of many trade shows, we took the step of becoming the first organizer to stage an online event dedicated to composites in the sports and health industry. We put together a high-level conference agenda and speaker roster, and devised some great ideas for virtual networking, said Christian Strassburger, Event Director at JEC Group. “I could not be prouder of what we achieved with many delegates from Europe and Americas tuning in, including representatives from more than 36 countries. I would also like to take this opportunity to thank all our sponsors and partners. Their trust, support, and input were a crucial part of both the quality and success of the summit.”

The event attracted an audience of more than 1,100 professionals from the composites industry, from 36 countries, and helped organize 216 pre-arranged one to one meetings between buyers and sellers via our dedicated online meeting rooms, this without mentioning informal networking between participants. It reached these numbers, as participants logged on in considerable numbers to learn from the insights and ideas of the unparalleled line-up of high-level speakers who took part in the summit’s twenty-track conference.

The agenda for the JEC Summit Sports & Health – Connect featured tracks on current trends and Innovations in sports & health composite applications, with keynotes delivered by Dominic LeBlanc Senior Concept Engineer, at Callaway Golf, Christophe Lecomte, Director of Biomechanical Solutions R&D, at Össur, Fleur Jong, Professional Sprinter, and Co-founder of the Para Athletics Foundation and Damiano Salvatori, Materials Research Engineer, at the Straumann Group.

The panel of high-profile experts from Europe and America offered perspectives and inspiration for the next generation of medical and sports devices made of composites materials. The line-up included Bjorn Ivar Austrem, Technical Director, at Madshus, Laurine Calistri, Research Engineer, at Proteor, Anatole Gilliot, CEO of Suprem, Julien Duplay, Composites Methods Engineer, at Decathlon, Eric Jackson, President of Apex Watercraft, Stéphan Vérin, General Secretary, at EuraMaterials, Maximilian Segl, Principal Expert Composites, and Johannes Wölper, Development Engineer, both from Ottobock, and Matthew Dickinson, Senior Lecturer in Engineering, at University of Central Lancashire. Christos Karatzias, at Mitsui Chemicals Europe and Anthony Bert, at Helicoid Industries.

And one cannot omit the international startups that pitched all through the three-day event: ProsFit (Bulgaria), Alchemy (Greece), moi composites (Italy), Mercuris (Germany), Arevo/Superstrata (USA), Checkerspot/WNDR Alpine (USA), Ambrocio (Finland) Nairoby (Argentina). All gave inspiring and promising perspectives in the sector and what to look for in the near future.

Source:

JEC Press Relations

Final Report - Yarn Expo Spring 2018 (c) Messe Frankfurt
23.03.2018

Final Report - Yarn Expo Spring 2018

  • Yarn Expo Spring’s status as Asia’s leading industry event attracts 15% more buyers
  • National Exhibition and Convention Center (Shanghai)
  • Shanghai, China, 14 – 16 March

Yarn Expo continued its evolution into the industry’s most comprehensive and effective business platform with its Spring Edition which concluded last week with a large increase in the buyer figure, as well as another year of growth in the exhibitor number. Strong demand was evident for recent growth areas of the fair such as synthetic, fancy and specialty yarns as well as chemical fibres, while exhibitors in the more traditional cotton product group also fared well. In total, 435 exhibitors from 10 countries & regions took part (2017: 393, 12 countries & regions), attracting 25,966 trade buyers from 88 countries & regions (2017: 22,579, 94 countries & regions).

  • Yarn Expo Spring’s status as Asia’s leading industry event attracts 15% more buyers
  • National Exhibition and Convention Center (Shanghai)
  • Shanghai, China, 14 – 16 March

Yarn Expo continued its evolution into the industry’s most comprehensive and effective business platform with its Spring Edition which concluded last week with a large increase in the buyer figure, as well as another year of growth in the exhibitor number. Strong demand was evident for recent growth areas of the fair such as synthetic, fancy and specialty yarns as well as chemical fibres, while exhibitors in the more traditional cotton product group also fared well. In total, 435 exhibitors from 10 countries & regions took part (2017: 393, 12 countries & regions), attracting 25,966 trade buyers from 88 countries & regions (2017: 22,579, 94 countries & regions).

“Once again, Yarn Expo proved itself as the ideal trade fair for the industry to benefit from changing demands and product trends, especially in the Chinese and wider Asian markets,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd explained. “The fair has evolved in recent editions to have a much bigger focus on synthetic, fancy & specialty yarns and chemical fibres, and based on the exhibitor feedback during the fair, there was an increase in buyers sourcing these products this year. What’s more, local buyers were showing strong interest in the offerings from Southeast Asian countries such as Indonesia and Thailand, while Vietnamese cotton exhibitors reported increased orders from China due to the favourable trade policies between these countries.”

As one of the industry’s leading players, Birla Jingwei Fibres naturally plays a big role at Yarn Expo, with their Birla Planet pavilion proving highly successful for the company. Senior Vice President Mr Sachin Malik, explained: “Yarn Expo is a very important platform for Birla, to be visible to our value chain, to connect with our customers, and our own clients’ customers. We value Yarn Expo as a long-term partner for showcasing our products and connecting with the value chain. Each edition we connect with more and more buyers, and more customers in the industry recognise the importance of this fair. It has developed into a premium event in the global textile industry calendar. Usually this edition is quieter than the autumn fair, but the results this year saw the spring edition reach the same level. Our booth was always packed with buyers, and we also received more high-quality and international buyers. Our pavilion members are also very satisfied with the buyers and their results this time.”

Exhibitor comments

Indonesia

“Yarn Expo is an ideal platform to meet not only Chinese but also global buyers. The fair attracts so many good-quality buyers, and compared to other fairs attracts more of our target buyers. The results this edition have been good. After four years of doing business in China, we’ve found many Chinese customers who are willing to pay for quality. The demand in the China market for high-quality products is growing, in particular because of the shortage of spinning capacity which is made up for by imports. We’ve seen more serious and meaningful buyers that have strong desire for further cooperation this time, and I think the potential of this market will continue to grow.” Mr Anupam Agrawal, Director Spun Yarn Business, PT. Indo-Rama Synthetics Tbk

Korea

“Our booth was so crowded throughout the fair. We had more than 300 buyers visit us, and I guess approximately 30% of them will turn into business after the fair. Our target buyers are fabric and garment manufacturers, and we found a lot of good quality ones here. A wide range of worldwide buyers from different market sectors sourced at our booth, especially big-brand sportswear manufacturers and sourcing offices. We’ve had visitors from China, Europe and many other countries. We are very satisfied with our first Yarn Expo experience, and we expect a very good outcome after the show.” Mr Joo Son, International Sales Team, HJLite

Pakistan

“Yarn Expo is the global meeting platform for all yarn industry players. You have buyers from all over the world here, so it is the best trade platform in Asia to connect with worldwide buyers. We’ve met people from Argentina, Columbia, Korea, Indonesia, the UK and the US. Around 40% of them are new to us. We’ve noticed that everyone is looking for new products nowadays, so we always bring new items. Fancy yarn is getting more common in China, and demand is growing steadily. China is definitely a huge market for us to develop.” Mr Mohammad Saad, Director of Abtex Intl Ltd

India

“Yarn Expo is really helpful in that it has a diverse buyer profile and attracts buyers from around the world. We managed to talk to customers from Pakistan, India and Colombia, as well as potential Chinese buyers who are very interested in our products. The buyers have been genuine with specific sourcing needs, and some of them have already placed orders.” Mr N. Sarawgi, Representative of Madhusudan Rayons Pvt. Ltd

Thailand

“This edition we brought our new Kapok material to the fair for the first time. It has been the most popular product at our booth. In recent editions, we’ve also met more and more garment factories asking for customised fancy yarn to make their products competitive and unique, while eco-friendly and natural yarns are also more popular. Yarn Expo is the platform we announce our new products and technologies, and the feedback from buyers from around the world can help us improve them and learn the latest market trends. The fair is of great value for our market strategy.” Mr Warakorn Bunkanokwong, Export Sales Manager, Kongkiat Textile Co Ltd

Singapore

“We are here to explore the China market, but are also glad more customers from Europe and America visited our booth. Many of the buyers here are at the decision-making level, so can give us clear requirements and advice about our products. This is a highly effective fair to meet Chinese buyers to learn first-hand what the market needs.” Mr Rahul Gupta, Marketing Manager, Texvista Intl Pte Ltd

Vietnam

“Yarn Expo is a great chance to meet our existing partners and find new buyers. Compared to China cotton yarn, we still have an advantage in price and quality which attracts a lot of buyers to our booth. Yarn Expo provides us with a quick way to tap into the Chinese and Asian markets.” Mr Du Xuan Cuu, Trade Director, Hanam Textile Co

Uzbekistan

“The Chinese market is important to us, so we chose to exhibit in Yarn Expo. We have met many buyers here, and each year we can find new customers through Yarn Expo. The international nature of this fair is also beneficial for our business.” Mr Dilshod, Export Manager, Exoeast Trade LLP

China

“Yarn Expo is the largest platform in Asia. Compared to other fairs, the buyers here are of higher quality; genuine buyers make up a large portion and most of them come with sourcing intentions. Currently, fancy yarn is in great demand in the market. The number of customers looking for such products is significantly higher this year, and Yarn Expo can effectively help us capture this demand.”
Ms Stella Gan, Sales Manager, Jin Dun Textile

Buyer comments

“We can find all ranges of cotton yarn, fancy yarn and chemical fibres at Yarn Expo. Most of the famous brands are here, and they bring the latest technologies and products, including debut products. Yarn Expo always catches the latest trends in the industry and presents them at the fair. This year the quantity and quality of fancy yarn exhibitors has increased, so I’ve found some products to source already.” Mr Wang Gaofeng, Deputy General Manager, Jiaxing Jinqie Fashion Co Ltd, China

“We mainly came to source fancy yarn this time, and we found many new options. This international show greatly expands our sourcing options. Many of our existing suppliers, including from Indonesia, exhibit at this fair so that’s why we source here. We’re satisfied with the exhibitor quality, and intend to place orders afterwards. There have been a number of new technologies presented here that left a deep impression on us.” Ms Linggar Jati Halim, Director, PT. Kartika Sinar Mulia, Indonesia

“I like this fair as it gathers exhibitors from the entire industry supply chain. As the demand for functional fabrics continues to increase, we can also see this trend in Yarn Expo. Therefore, the fair helps us to learn about the industry’s developments.” Mr Jiang Chang, Marketing Manager, Hangzhou Gaoxi Technology Co Ltd, China

The next Yarn Expo fair, the Autumn Edition, will be held at the earlier date of 27 – 29 September 2018, once again at the National Exhibition and Convention Center. 

20th anniversary of the JEC Innovation Awards (c) GROUPE JEC - Thierry-Alain TRUONG
07.03.2018

20th anniversary of the JEC Innovation Awards

  • JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

  • JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

“JEC Group supports innovation. In 1998, it created the first award dedicated to composites, as a way to promote and reward the sector’s champions. Thanks to the work of JEC Group’s teams, the program has become an international benchmark. Each year, we receive more than a hundred applications from all over the world. Selection is now based on criteria like the level of involvement of the innovation’s partners in the value chain, the technical nature of the innovation, or its commercial applications,” explains JEC Group President & CEO Frédérique Mutel.
A new feature this year is that the jury revealed the winners during the ceremony, and the public could choose their favorite innovation before, during, and after the ceremony. So there is still time to vote! Votes are opened until Thursday March 8th, 5pm http://innovationawards.jec-world.events
Did you miss the ceremony?

11 AWARD WINNERS:
AEROSPACE APPLICATION

Winner:
AeroComposit, JSC (Russia) and its partner Solvay (United Kingdom)

  • Infusion technology for an aircraft wing

The use of infusion technology to manufacture primary structural components for an aircraft wing. The technology makes it possible to create extra-long, integrated composite structures with complex aerodynamic shapes.

AEROSPACE PROCESS 
2 tied winners!
Winner: Airbus (Germany) and its partners, BMW Group (Germany), Technical University of Munich (TUM) (Germany), Neue Materialien Bayreuth GmbH (Germany), Werkzeugbau Siegfried Hofmann GmbH (Germany), BASF SE (Germany), Foldcore GmbH (Germany), Neenah Filtration (Germany) and SGL Carbon GmbH (Germany)

  • Complex structural applications for MAI sandwich technology

Cost-effective production of a complex 2.5D structure made of thermoplastic composite sandwich, with very short cycle times: under 5 minutes for aerospace materials and 2.5 minutes for automotive materials.

Winner: M. Torres Diseños Industriales SAU (Spain)
Moldless process to manufacture one-piece parts
A new manufacturing process for oversized one-piece reinforced composite structures, without requiring the use of complete molds.

AUTOMOTIVE APPLICATION
Winner: Ford Werke GmbH (Germany) and its partners, Gestamp (United Kingdom), GRM Consulting (United Kingdom) and University of Warwick (United Kingdom)

  • Lightweight composite automotive suspension part

Structural suspension part made of lightweight composite, using a brand-new patented process for prepreg/SMC/steel overmolding that was designed using a new computer-aided engineering (CAE) technology.

AUTOMOTIVE PROCESS
Winner: Audi AG (Germany) and its partners, Voith Composites GmbH & Co. KG (Germany), Dow Automotive (Switzerland), and Zoltek Corp. (United States)

  • Series production of a rear panel module made of carbon composite

For the first time, the potential of carbon fiber reinforced plastics (CFRP) is used to full advantage in series production with a new rear panel module and cost-effective production technologies.

CONSTRUCTION & INFRASTRUCTURE
Winner: Komatsu Seiren Co., Ltd. (Japan) and its partners, Kanazawa Institute of Technology (Japan) and Nagase ChemteX Corporation (Japan)

  • Cabkoma cable made of CFRTP

Komatsu Seiren has developed a cable made of molded carbon fiber reinforced thermoplastic (CFRTP), using a very cost-effective process that consists in polymerizing a thermoplastic epoxy resin in situ.

MARINE
Winner: Uljanik JSC (Croatia)

  • Composite cargo decks for a vehicle carrier

On the SIEM Cicero, a vehicle carrier with a capacity of 7,000 vehicles, glass-fiber reinforced composites are used for a number of the structures for the cargo decks, thereby considerably reducing the ship’s weight, fuel consumption and CO2 emissions.

RAILWAY
Winner: ELG Carbon Fibre Ltd. (United Kingdom) and its partners, Alstom Transport (United Kingdom), Magma Structures (United Kingdom), the University of Birmingham (United Kingdom), and the University of Huddersfield (United Kingdom)

  • A bogie frame made of optimized lightweight carbon fiber

This project has developed the very first carbon-fiber bogie frame that uses a recycled material, making it possible to overcome the obstacles to a commercial adoption of this type of structure.

SPORTS & LEISURE
Winner: BMW Group (Germany) and its partners EDAG Engineering GmbH (Germany), KraussMaffei Technologies GmbH (Germany), Chr. Karl Siebenwurst GmbH & Co. KG (Germany), TUM-LCC (Germany), Automation W + R GmbH (Germany), and FHG-IGCV (Germany)

  • A modular construction system for the rear swing arm suspension of a motorcycle

A modular system to produce a complex-shape swing arm suspension reinforced with carbon fiber. The system can adjust the mechanical properties on a case-by-case basis, for a competitive cost and weight compared to metal solutions.

SMART CITIES
Winner: MC Materiales Compuestos (Argentina) and its partners, Plaquimet (Argentina), Purcom (Brazil), IS Groupe - Composite Integrity (France), and G12 Innovation (Brazil)

  • The Wet Core Pod composite housing module

The Wet Core Pod is a composite housing module with an industrialization potential that can facilitate the most complex, costly and difficult step in a construction project.

SUSTAINABLE DEVELOPMENT
Winner: Cetim-Cermat (France) and its partner, CETIM (France)

  • “3-in-1” line for producing recycled composites

A modular line that uses an innovative thermomechanical process to make large panels from recycled composites or plastics. The panels are then thermoformed into parts.
 

Source:

Dorothée David & Marion RISCH, Agence Apocope

Intertextile Shanghai, Taiwan Pavillion (c) Messe Frankfurt
26.02.2018

Largest range of exhibitors from Asia awaits at Intertextile Shanghai Apparel Fabrics

For buyers that prioritise having the widest range of sourcing options in one place, their best bet is March’s Intertextile Shanghai Apparel Fabrics. Boasting pavilions from Japan, Korea, Pakistan and Taiwan, individual exhibitors from Hong Kong, India, Indonesia and Vietnam, not to mention 2,800-plus Chinese exhibitors, the fair is the largest gathering of Asian suppliers under one roof for the spring / summer sourcing season. To ensure convenience for buyers, international exhibitors are grouped by country or region, while Chinese exhibitors are located in product halls including fabrics for casualwear, functional wear / sportswear, ladieswear, lingerie & swimwear, shirting and suiting, as well as for accessories and denim.

In total, around 3,300 exhibitors will showcase their apparel fabrics and accessories at the fair, with the SalonEurope zone hosting premium suppliers from Europe – including pavilions and zones from France, Germany, Italy and Turkey – while the International Hall also houses other overseas exhibitors from the likes of Argentina, Australia, Peru the US and elsewhere.

For buyers that prioritise having the widest range of sourcing options in one place, their best bet is March’s Intertextile Shanghai Apparel Fabrics. Boasting pavilions from Japan, Korea, Pakistan and Taiwan, individual exhibitors from Hong Kong, India, Indonesia and Vietnam, not to mention 2,800-plus Chinese exhibitors, the fair is the largest gathering of Asian suppliers under one roof for the spring / summer sourcing season. To ensure convenience for buyers, international exhibitors are grouped by country or region, while Chinese exhibitors are located in product halls including fabrics for casualwear, functional wear / sportswear, ladieswear, lingerie & swimwear, shirting and suiting, as well as for accessories and denim.

In total, around 3,300 exhibitors will showcase their apparel fabrics and accessories at the fair, with the SalonEurope zone hosting premium suppliers from Europe – including pavilions and zones from France, Germany, Italy and Turkey – while the International Hall also houses other overseas exhibitors from the likes of Argentina, Australia, Peru the US and elsewhere.

Japan Pavilion keeps ‘Banshu-Ori’ tradition alive
Organised by the Japan Fashion Week Organization (JFW), the Japan Pavilion will house 22 exhibitors and also feature a Japan Trend Corner. After the immense popularity of this pavilion with buyers in previous editions, the organisers are in a good position to comment on the trends in the local market. “The now mature Chinese market tends to seek out very different types of products and purchase in smaller batches, which is a world away from the mass-production focus of the past,” JFW commented.

Included in this edition’s Japan Pavilion are three companies from the Nishiwaki region, which is famous for its ‘Banshu-Ori’, or Banshu weave. Banshu-Ori is a yarn-dyed fabric, woven into various patterns, such as checks and stripes, with yarns that are dyed before being woven by weaving machines. This tradition dates back to 1792, and will be showcased by Bon Co Ltd, Ueyama Orimono Corp and Kuwamura Co Ltd at the fair. Bon will showcase a range of new products using this traditional technique, including organic cotton fabrics, paper yarn fabrics and indigo items. Ueyama Orimono, which boasts Japan’s largest dyeing factory in Nishiwaki, designs its own fabrics in Tokyo, and will present cotton, cotton / linen and medium-thin yarn-dyed fabrics at the fair. Kuwamura will showcase fabrics based on 100% yarn-dyed cotton, as well as cotton and cotton-blend materials.

Taiwan Pavilion the place to find innovation
The Taiwan Pavilion, with over 40 participating companies, is a guaranteed source of innovation at the fair, with a number of exhibitors also offering eco-friendly options. Some of the highlights include:

  • Keen Ching Industrial: they will have a number of their patented KCC-branded zippers at the fair including a durable double-coil zipper, an invisible zipper with a movable retainer box, a track type water-repellent zipper, a curved metal zipper and more.
  • Handseltex Industrial: will showcase a wide range of products including lace, jacquard and mesh, made with the likes of organic cotton and recycled polyester with an eco-friendly production process.
  • Paltex: the company’s ‘From Waste to Yarn’ regeneration system involves turning waste fishing nets and plastic bottles from the ocean into polyester and nylon fabrics, membranes and trimmings.
  • Superwill: their unique gradient fabric combines specialty yarns and a special knitting process, and features a thickness that decreases from top to bottom. This design allows the fabric to be tailored to different garments.
  • Tri Ocean Textile: will feature its own DreamFel® high-performance filament polypropylene yarn which is lightweight, durable and environmentally friendly, and used in sports & outdoor apparel and outdoor furniture.

The Taiwan Pavilion will be full of innovative textile solutions again this edition
The Korea and Pakistan Pavilions round out the Asian offerings. Nearly 60 Korean exhibitors will showcase predominantly manmade, fancy, knitted, acetate woven, tricot, jacquard, faux leather and printed fabrics, as well as lace and embroidery, for ladieswear, while other members will feature fabrics for sportswear and outdoor wear. Those from Pakistan, meanwhile, will feature in the Beyond Denim hall and offer a wide range of denim products.  

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

Source:

Messe Frankfurt