From the Sector

all
Corona
Sustainable
Textile Business
Textile Machinery
Fibres, Yarns & Nonwovens
Technical Textiles
Interior Textiles
Clothing
Companies
Fairs
Trade
Associations
People
Archive
Reset
2 results
POWERFIL receives Plastics Recycling Award Europe 2024 (c) PRSE 2024
24.06.2024

POWERFIL receives Plastics Recycling Award Europe 2024

At PRSE in Amsterdam, the DischargePro control system from EREMA's POWERFIL business unit was presented with the Plastics Recycling Award Europe in the "Recycling Machinery Innovation of the Year" category. The smart technology for the EREMA laser filter improves process stability over the entire operating period and reacts automatically to fluctuations during the recycling process.

The DischargePro system automatically compensates for fluctuations in the input material, thereby ensuring uniform thickening during melt filtration and thus a consistent process. Depending on the application and contamination, POWERFIL was able to reduce melt loss by up to 50 percent with the DischargePro compared to the previous EREMA laser filter control system. These facts convinced the jury, who described the technology as an intelligent technological advance in the extrusion process.

At PRSE in Amsterdam, the DischargePro control system from EREMA's POWERFIL business unit was presented with the Plastics Recycling Award Europe in the "Recycling Machinery Innovation of the Year" category. The smart technology for the EREMA laser filter improves process stability over the entire operating period and reacts automatically to fluctuations during the recycling process.

The DischargePro system automatically compensates for fluctuations in the input material, thereby ensuring uniform thickening during melt filtration and thus a consistent process. Depending on the application and contamination, POWERFIL was able to reduce melt loss by up to 50 percent with the DischargePro compared to the previous EREMA laser filter control system. These facts convinced the jury, who described the technology as an intelligent technological advance in the extrusion process.

With the DischargePro control system, POWERFIL significantly increases the degree of automation in the filter process. The discharge control system reacts to specific disruptions in the process. In this way, the speed of the scraper star is adjusted at short notice and returns to the setpoint speed as soon as the contamination peak has been discharged. Furthermore, the control system also recognizes changes in throughput and adjusts the discharge rates accordingly. In the event of a higher pressure drop across the filter screen, which is caused by a higher viscosity of the melt, DischargePro adjusts the setpoint value to ensure a consistent discharge rate. Long-term changes, such as the condition of the filter screen, are also taken into account in all adjustments.

More information:
EREMA Group POWERFIL plastics Recycling plastic recycling Awards
Source:

EREMA Group GmbH

print close
more
22.06.2022

EREMA: POWERFIL presents new laserfilter

POWERFIL, a business unit of recycling machine manufacturer EREMA GmbH, presents its 2/406 laserfilter.

"For applications with a focus on melt quality and filtration fineness, this increase in screen area ensures lower pressure and temperature at the same throughput rate, allowing even finer screens to be used for even better results in quality-intensive plastics applications," explains Robert Obermayr, Head of Business Unit POWERFIL, EREMA GmbH. If the throughput capacity of the recycling plant needs to be increased, a significantly higher rate of plastic melt can be filtered while maintaining the other parameters thanks to the larger surface area of the screen. Up to 9,000 kilogrammes of melt can be filtered per hour with the Quattro version of the new LF 406 laserfilter.

POWERFIL, a business unit of recycling machine manufacturer EREMA GmbH, presents its 2/406 laserfilter.

"For applications with a focus on melt quality and filtration fineness, this increase in screen area ensures lower pressure and temperature at the same throughput rate, allowing even finer screens to be used for even better results in quality-intensive plastics applications," explains Robert Obermayr, Head of Business Unit POWERFIL, EREMA GmbH. If the throughput capacity of the recycling plant needs to be increased, a significantly higher rate of plastic melt can be filtered while maintaining the other parameters thanks to the larger surface area of the screen. Up to 9,000 kilogrammes of melt can be filtered per hour with the Quattro version of the new LF 406 laserfilter.

"Plastic recycling has become a must-have, even for input streams with higher levels of contamination. Efficient filtration systems are therefore indispensable for achieving the specified melt quality using existing extrusion systems," says Obermayr. That is why POWERFIL also offers the proven EREMA melt filters as individual components for existing EREMA machines and third-party extrusion systems. The product range includes the SW RTF partial area backflush system and the laserfilter. The range is aimed at manufacturers as well as recyclers, because the high-performance filters can be used to process post consumer plastics as well as post industrial films with paper labels and clean PET material. Both types of filter are particularly easy to integrate into an existing recycling plant and both are available in numerous sizes and variations. Whether the customer uses the robust backflush filter or the continuous high-performance laserfilter depends on the throughput and level of contamination of the material. The Laserfilter is ideal for heavy contamination. It handles impurity levels up to 5 percent and filtration as fine as 70 μm while continuously cleaning the screen with a scraper.

POWERFIL will also present the new 2/406 laserfilter and the full range of filters at the K 2022 trade fair stand for the EREMA Group.

More information:
EREMA Recycling plastics
Source:

EREMA Group GmbH

print close
more