From the Sector

Reset
6 results
Lenzing relies on wind power in the fiber and pulp production (c) Lenzing AG
At the ground-breaking ceremony, from left to right: Josef Reiter (Mayor of Engelhartstetten) Thomas Östros (Vice-President of the European Investment Bank) Helga Krismer-Huber (Green Party Lower Austria LAbg) Stephan Pernkopf (Deputy Governor of Lower Austria) Leonore Gewessler (Minister for Climate Protection) Gregor Erasim (owner of WLK energy) Gerda Holzinger-Burgstaller (Chairwoman of the Management Board of Erste Bank Österreich) Bianca Flesch (Environmental Management Messer Austria GmbH) Mario Wohanka (WLK Chief Financial Officer) Christian Skilich (CTO Lenzing AG)
10.11.2023

Lenzing relies on wind power in the fiber and pulp production

The Lenzing Group has concluded a supply contract with the Austrian electricity producer WLK energy for the purchase of around 13 megawatts of wind power. Lenzing is thus not only underlining its commitment to climate protection and the energy transition, but is also making a long-term investment in a price-stable and diversified electricity supply. The contract has a term of 15 years and provides for supply from the new wind farm in Engelhartstetten from the first quarter of 2025.

The construction of the wind farm is a joint project involving several partners, including the operator and electricity supplier WLK energy, based in Untersiebenbrunn (Lower Austria). The total output of the wind farm with a total of eleven wind turbines will be around 45 megawatts. The share of around 13 megawatts, which will be produced exclusively for the needs of the Lenzing site (Upper Austria), corresponds to the average electricity requirements of around 10,000 households per year in Austria. The ground-breaking ceremony to mark the start of construction took place on November 09, 2023 with representatives from politics and business.

The Lenzing Group has concluded a supply contract with the Austrian electricity producer WLK energy for the purchase of around 13 megawatts of wind power. Lenzing is thus not only underlining its commitment to climate protection and the energy transition, but is also making a long-term investment in a price-stable and diversified electricity supply. The contract has a term of 15 years and provides for supply from the new wind farm in Engelhartstetten from the first quarter of 2025.

The construction of the wind farm is a joint project involving several partners, including the operator and electricity supplier WLK energy, based in Untersiebenbrunn (Lower Austria). The total output of the wind farm with a total of eleven wind turbines will be around 45 megawatts. The share of around 13 megawatts, which will be produced exclusively for the needs of the Lenzing site (Upper Austria), corresponds to the average electricity requirements of around 10,000 households per year in Austria. The ground-breaking ceremony to mark the start of construction took place on November 09, 2023 with representatives from politics and business.

In 2019, Lenzing was the first fiber manufacturer to set itself the goal of reducing its CO2 emissions by 50 percent by 2030 and becoming carbon-neutral by 2050. This CO2 reduction target was recognized by the Science Based Targets Initiative. In 2022, Lenzing opened Upper Austria's largest open-space photovoltaic plant together with Verbund and also signed an electricity supply contract for photovoltaic energy with the green electricity producer Enery and Energie Steiermark.

Source:

Lenzing AG

FIDIVI Tessitura Vergnano S.p.A./ Nabucco 6075 Reale © Foto: Indorama Ventures Fibers Germany GmbH / FIDIVI Tessitura Vergnano S.p.A./ Nabucco 6075 Reale
06.06.2023

Trevira CS at the Cruise Ship Interiors Design Expo Americas in Miami

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

In the marine sector, the demands placed on textiles are not only high in terms of fire protection, but also with regards to light resistance and durability. This is particularly true for textiles used in outdoor applications. These must be extremely robust, as they are exposed to moisture and sunlight. To meet these requirements, Trevira CS has launched a range of 30 new spun-dyed, UV-stable filament yarns. Besides color depth and durability, spun-dyed yarns offer another advantage: They are more sustainable because the fabrics made from them can be produced in a more environmentally friendly way than textiles that are dyed in one piece or consist of brightly colored yarns. In fabric production, a large share of resource consumption goes to the dyeing and finishing of fabrics as well as the use of chemicals and water. However, with spun-dyed yarns, these processing steps are unnecessary – the yarn immediately comes out of the spinneret in the desired color, reducing the products’ environmental impact.

The topic of sustainability is also taken up in other Trevira CS products. For example, Trevira CS fabrics are available in recycled versions. They consist of fiber and filament yarns obtained in different recycling processes. Filament yarns are produced using recycled PET bottles, they contain 50% post-consumer recycled material. Recycled fibers are obtained using an agglomeration plant and in further processing steps from residual pre-consumer waste from production. They consist of 100% recycled material (pre-consumer recycling). All flame retardant recycled Trevira® products are GRS (Global Recycled Standard) certified.
Fabrics made from these yarns are marked with the Trevira CS eco trademark. The prerequisite for this is a recycled content of at least 50%. Among the fabrics presented at the Trevira CS trade fair stand are 8 fabrics bearing the Trevira CS eco brand.

The long-term goal in developing sustainable products is undoubtedly to enter a circular economy. For this new path, an innovative Trevira CS product development was launched, producing flame retardant fibers and filament yarns from chemically recycled raw material. In this case, the basic raw material for the chemical recycling was PET bottles, but essentially it could be most any other PET recyclables, such as packaging material or even textiles. Chemical recycling involves depolymerization, a sequence of chemical reactions in which the polymer chains are broken down again into their original components, i. e. the monomers. In a further processing step, impurities are removed. Before the polymerization process is initiated, a small amount of MEG (mono ethylene glycol) is added.

The same technology used to produce the original (virgin) raw material for Trevira CS is also used here. The flame retardant modification is added during polymerization. In this way, the flame retardant properties are indelibly anchored in the polymer.

By recycling valuable materials such as packaging material, waste can be avoided. The raw material obtained from the recycling process is comparable to the original material can be used again in high-quality products.

Source:

Indorama Ventures Fibers Germany GmbH

(c) Suedwolle Group
24.02.2023

Südwolle: Fall/Winter 2024/25 Collection

  • Technical innovation and natural fibres, for a broader definition of sustainability

The weaving collection further develops the themes that have emerged in recent seasons, interpreting them with a view to long-term sustainability.

In harmony with the Südwolle Group’s identity and values, research and technical innovation are combined with a high level of quality. Wools, almost all certified, are enriched by a significant level of performance that continues to evolve. The production process attempts to limit carbon footprint, as sustainability is the key principle guiding all the company’s choices.

The ability to offer yarns made from selected natural raw materials is in harmony with today’s sustainable buying habits, with a preference for garments and accessories that can be worn at any time of year. In contrast with the logic of fast fashion, today’s buyers, led by younger generations with a focus on the values behind their fashion choices, tend to choose items that can be expected to last longer, decreasing the environmental impact of textile wastes and throwaway fashion.

  • Technical innovation and natural fibres, for a broader definition of sustainability

The weaving collection further develops the themes that have emerged in recent seasons, interpreting them with a view to long-term sustainability.

In harmony with the Südwolle Group’s identity and values, research and technical innovation are combined with a high level of quality. Wools, almost all certified, are enriched by a significant level of performance that continues to evolve. The production process attempts to limit carbon footprint, as sustainability is the key principle guiding all the company’s choices.

The ability to offer yarns made from selected natural raw materials is in harmony with today’s sustainable buying habits, with a preference for garments and accessories that can be worn at any time of year. In contrast with the logic of fast fashion, today’s buyers, led by younger generations with a focus on the values behind their fashion choices, tend to choose items that can be expected to last longer, decreasing the environmental impact of textile wastes and throwaway fashion.

In casual wear too, the importance of comfort and feeling at ease is reconciled with the desire to wear items of good taste and quality. The new formalwear includes carefully cut garments made of materials guaranteeing fit, comfort and durability. A widespread focus on these factors makes for more conscientious, reasoned purchases, less subject to impulse buying.

Südwolle interprets the new interest in heritage, leading to the emergence of the phenomenon of quality second-hand, with a return to its core business and essentials, in a new sustainable version using certified fibres, chlorine-free anti-shrinkage treatments and long-lasting products that can be washed at home at low temperatures.

One of the most recent results of the company’s technical innovation is the new OTW® line of yarns for weaving produced using Omega Twist® technology, developed and patented by the Südwolle Group, producing yarns offering outstanding performance in terms of reduced pilling and greater elasticity, tenacity and durability.

More information:
Südwolle Südwolle Group yarn wool
Source:

Suedwolle Group

09.08.2022

NCTO: North Carolina Textile Executives highlight Importance of Industry

North Carolina textile executives spanning the fiber, yarn, fabric, and finished product textile industries participated in a roundtable discussion with Rep. Kathy Manning (D-NC), at which they discussed the innovative achievements and competitiveness of the domestic industry and outlined priority issues in Washington that impact their daily operations.

The roundtable discussion, hosted by Unifi Inc. and sponsored by the National Council of Textile Organizations (NCTO), was held at Unifi’s headquarters in Greensboro, North Carolina.

North Carolina is the second largest state employer of textile-related jobs, employing more than 30,000 jobs in 2021, according to U.S. government data. The state’s $2.7 billion in textile-related exports leads the nation, according to U.S. government data.

Congresswoman Manning’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $65.2 billion in output in 2021 and employed nearly 535,000 workers. The industry has been at the forefront of domestic manufacturing of over 1 billion personal protective equipment (PPE) items during the COVID-19 pandemic.

North Carolina textile executives spanning the fiber, yarn, fabric, and finished product textile industries participated in a roundtable discussion with Rep. Kathy Manning (D-NC), at which they discussed the innovative achievements and competitiveness of the domestic industry and outlined priority issues in Washington that impact their daily operations.

The roundtable discussion, hosted by Unifi Inc. and sponsored by the National Council of Textile Organizations (NCTO), was held at Unifi’s headquarters in Greensboro, North Carolina.

North Carolina is the second largest state employer of textile-related jobs, employing more than 30,000 jobs in 2021, according to U.S. government data. The state’s $2.7 billion in textile-related exports leads the nation, according to U.S. government data.

Congresswoman Manning’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $65.2 billion in output in 2021 and employed nearly 535,000 workers. The industry has been at the forefront of domestic manufacturing of over 1 billion personal protective equipment (PPE) items during the COVID-19 pandemic.

During the roundtable, North Carolina executives showcased the industry’s important contribution to the state and the U.S. economy as well as its advanced sustainability initiatives, while outlining critical policies, such as the importance of Buy American and Berry Amendment government procurement policies, maintaining strong rules of origins in free trade agreements, supporting a domestic PPE production sector, and the need to address larger systemic trade issues with China.

“In North Carolina, the textile industry is woven into the very fabric of our state and economy, with more than 33,000 workers employed in over 600 textile manufacturing facilities across the state. In Congress, I am committed to supporting our homegrown industry by making PPE in America, protecting the yarn forward rule of origin in our trade agreements, and cracking down on China’s unfair trade practices. I am thrilled to engage with industry leaders in my district, as we discuss ways to grow the U.S. textile industry and the critical role that textile manufacturers play in our local, state, and national economy,” said Congresswoman Kathy Manning.

(c) Coperion GmbH
24.06.2022

Coperion: New Development for Plastic Fiber and Flake Recycling

With the goal of making recycling of lightweight, high-volume fiber and flake recyclate much more economical and, in some cases even possible, Coperion has developed a new version of its ZS-B side feeder. Using the innovative ZS-B MEGAfeed, plastic recyclate with a bulk density under 200 kg/m³, long considered intake-limited and thus not worth recycling, can be reliably fed in large quantities into Coperion’s ZSK twin screw extruder and be concurrently recycled and compounded.

The ZS-B side feeder’s novel design makes it possible to feed very high rates of fiber and flakes, such as PA, PE, PET, and PP. As a result, the ZSK twin screw extruder’s high capacity can be fully exploited when the ZS-B MEGAfeed is used. Very high throughputs in both mechanical and chemical recycling of post-industrial and post-consumer waste are achieved.

With the goal of making recycling of lightweight, high-volume fiber and flake recyclate much more economical and, in some cases even possible, Coperion has developed a new version of its ZS-B side feeder. Using the innovative ZS-B MEGAfeed, plastic recyclate with a bulk density under 200 kg/m³, long considered intake-limited and thus not worth recycling, can be reliably fed in large quantities into Coperion’s ZSK twin screw extruder and be concurrently recycled and compounded.

The ZS-B side feeder’s novel design makes it possible to feed very high rates of fiber and flakes, such as PA, PE, PET, and PP. As a result, the ZSK twin screw extruder’s high capacity can be fully exploited when the ZS-B MEGAfeed is used. Very high throughputs in both mechanical and chemical recycling of post-industrial and post-consumer waste are achieved.

Increased Throughput in Numbers
With a ZSK 58 Mc18 twin screw extruder, the throughput increase and thus the potential of the new ZS-B MEGAfeed becomes very clear. When recycling PA fibers with a bulk density of ~40-50 kg/m3, throughputs of 70 kg/h were previously achieved using conventional equipment. When the PA fibers were fed into the ZSK extruder using the ZS-B MEGAfeed, throughputs increased about fourteenfold to 1,000 kg/h. Similar results were achieved recycling carbon fibers with a bulk density of ~50-70 kg/m3; in this case, throughputs increased from 50 kg/h to 2,500 kg/h using the ZS-B MEGAfeed. When recycling PCR (Post-Consumer Recycled) flakes, throughputs increased from 50 kg/h to 700 kg/h, and from 80 kg/h to 1,300 kg/h with multilayer film flakes.

Key to Economical Recycling of A Wide Variety of Plastics
Plastics previously considered not recyclable are becoming a valuable raw material using the new Coperion ZS-B MEGAfeed. For example, PCR flakes or recyclate from carbon fiber-reinforced plastics can now be fed into the ZSK extruder at high feed rates and recycled economically.

In the case of mechanical upcycling, upstream processes necessary for compounding, such as compacting, melting and agglomeration, are completely eliminated using the ZS-B MEGAfeed technology. In this recycling process, flakes and fibers can be fed directly into the ZSK extruder, where they are melted, compounded, devolatilized, and filtered in a single step. In so doing, both investment costs and energy consumption drop. The production process becomes significantly more efficient. Moreover, the thermal product stress is reduced and recyclate quality increases.

Even when recycling PET, the feed rate is no longer a limiting factor. With the ZS-B MEGAfeed, PET flakes and fibers can be fed into the ZSK twin screw extruder in large quantities with no pre-drying or crystallizing, where they can be processed with the highest degree of profitability.

The ZS-B MEGAfeed can also feed large quantities of post-consumer waste, adding appreciable value to the chemical recycling process with the ZSKs. ZSK throughput rates are very high with the ZS-B MEGAfeed. Preheating of the recyclate via mechanical energy input of the twin screws thus becomes even more economical for further processing in the reactor.

Existing Coperion extruders can be retrofitted with ZS-B MEGAfeed technology to greatly expand their spectrum of applications and increase their throughput rates.

Source:

Coperion GmbH / Konsens Public Relations GmbH & Co. KG

(c) Suedwolle
23.02.2022

Südwolle: Fall/Winter 2023/24 Collection

  • The “new normal” by Südwolle: responsible, seasonless and high performance

The concept of seasonality in the F/W 2023/24 collection is increasingly vague, in favour of more functional categories in terms of performance, sustainability, innovative content and style.

Yarns are predominantly pure wool or blends, corresponding with the new concept of “dressing well” which is gaining ground among consumers – an individual style that promotes wellbeing at various times of the day, a fluid, personal idea of elegance, that fits daily activities with ease.

The new formal replaces the traditional suit with “smart casual” jackets and trousers -comfortable, and carefully cut, they feature quality materials that guarantee wearability as well as durability. Focus on these factors makes for more informed and less impulse buying.

The renewed interest in heritage is met with Südwolle's wool know-how and its basic essentials, updated to make them more sustainable by choosing certified fibres and chlorine-free anti-shrink treatments, for products with a longer lifespan thanks to domestic washing at low temperatures.

  • The “new normal” by Südwolle: responsible, seasonless and high performance

The concept of seasonality in the F/W 2023/24 collection is increasingly vague, in favour of more functional categories in terms of performance, sustainability, innovative content and style.

Yarns are predominantly pure wool or blends, corresponding with the new concept of “dressing well” which is gaining ground among consumers – an individual style that promotes wellbeing at various times of the day, a fluid, personal idea of elegance, that fits daily activities with ease.

The new formal replaces the traditional suit with “smart casual” jackets and trousers -comfortable, and carefully cut, they feature quality materials that guarantee wearability as well as durability. Focus on these factors makes for more informed and less impulse buying.

The renewed interest in heritage is met with Südwolle's wool know-how and its basic essentials, updated to make them more sustainable by choosing certified fibres and chlorine-free anti-shrink treatments, for products with a longer lifespan thanks to domestic washing at low temperatures.

Sustainable innovation attentive to performance and durability goes hand in hand with the selection of earth-friendly recycled, recyclable and traceable materials blended with natural fibres.

Overview of the collection
The words inspiring the new collection are: sustainable, responsible, natural, recycled and high-performance.

A leading position goes to the OTW® line of weaving yarns made with Omega Twist® technology, developed and patented by Südwolle Group, which gives yarns enhanced performances in terms of reduced pilling, greater elasticity, strength and durability.

Espresso TEX Nm 48/2 (100% untreated wool,20.5μ) was created to value the authentic naturalness of wool. Made with undyed, untreated merino wool, it is a twisted yarn for weaving, ideal, for example, for flannel suits and jacket. It is available in 4 shades of brown obtained by mixing different percentages of untreated raw wool and undyed, naturally brown wool.
Eolo Nm 24/2 (100% wool 20.5 µ) is an example of circular production and reuse of recycled wool within the Karma project. Starting with in-house pre-and post-production waste, a partly carded, partly combed, product is created at Südwolle Group facilities where this type of process can be carried out.

Rhein GOTSNm 64/1 and Nm 64/2 (100% wool 19.5 µ) is the new pure woolyarn with GOTS –Global Organic Textile Standard certification, which certifies its organic provenance. The same traceable origin applies to Lerici GOTS X-COMPACT®Nm 60/1 (70% GOTS certified wool 19.5μ, 30% Schappe Mulberry silk), a glossy yarn with reduced pilling effect for improved anti-abrasion performance, obtained with X-COMPACT® spinning technology.

Performance paired with reduced energy consumption is the added value of SRP ClarkNm 60/2 (48% wool 23.5μ, 44% cationic polyester, 8% Donegal viscose), also available in a stretch version. The cationic polyester can be dyed blended with the wool, making double dying unnecessary and so saving on water and energy consumption. The addition of pre-dyed red, green or brown Donegal viscose to the blend creates a fluid look enhanced with slubbing and micro-nep effect.

Rosvic Nm 40/2 (98% wool 19.5μ, 2% Lycra®44 dtex) is a twisted yarn with Basolan treatment for comfort fabrics. It has a slightly textured surface with a contrasting or tone on tone micro mouliné pattern.

Key players among the circular knitting and hosiery yarns are Basak Nm 80/1(80% wool TEC. 20% polyamide 2.2 dtex), OTW® Barone GRS Nm 60/2(60% wool 23.5 µ TEC, 40% RENU™ recycled cationic polyester 2.2 dtex) and OTW®Concorde Nm 88/2(100% wool 19.3 µ TEC), available in the new colour cards.

More information:
Südwolle collection
Source:

(c) Suedwolle