From the Sector

Reset
1193 results
09.02.2023

Italian textile machinery: declining orders for fourth quarter 2022

The fourth quarter 2022 textile machinery orders index, processed by ACIMIT, the Association of Italian Textile Machinery Manufacturers, showed a sharp 35% decline compared to the period from October to December 2021. In absolute value, the index stood at 83.6 points (basis: 2015=100).

Orders took a 34% drop on the domestic market, while the foreign index was down fully 37%. In Italy, the index’s absolute value came in at 155.4 points, whereas on foreign markets the value stood at 75.8 points.

On annual basis, the orders index marked an 18% decrease and an absolute value of 110.4 points. The drop in orders abroad was 17%, while orders collected in Italy were 28% lower than the figures drawn up in 2021.

The fourth quarter 2022 textile machinery orders index, processed by ACIMIT, the Association of Italian Textile Machinery Manufacturers, showed a sharp 35% decline compared to the period from October to December 2021. In absolute value, the index stood at 83.6 points (basis: 2015=100).

Orders took a 34% drop on the domestic market, while the foreign index was down fully 37%. In Italy, the index’s absolute value came in at 155.4 points, whereas on foreign markets the value stood at 75.8 points.

On annual basis, the orders index marked an 18% decrease and an absolute value of 110.4 points. The drop in orders abroad was 17%, while orders collected in Italy were 28% lower than the figures drawn up in 2021.

ACIMIT president Alessandro Zucchi stated that, “The orders index data for the fourth quarter confirms what had already been observed in the previous quarters in 2022. After a sharp increase in 2021, this decrease in orders for the past year is physiological. Furthermore, the ongoing war between Russia and Ukraine, with its related consequences on daily business and trade, and a macroeconomic framework in which uncertainty prevails, have further negatively affected the orders intake.”

Data for the last quarter does not suggest a reverse in the negative trend for the first months of 2023. Declining energy prices and inflation, although still high, also declining slightly are, however, signs of a light improvement in the business of companies in the sector as well. “We need to look to the current year with optimism,” continued ACIMIT president. “Our member companies are already focusing on ITMA, the upcoming global textile machinery industry trade fair, that will be held from June 8-14 in Milan.” “I am confident that ITMA Milan can represent an opportunity for further development of the Italian textile machinery sector,” concluded Zucchi. “The technological innovations that our manufacturers will bring to the trade show will meet the textile industry’s need to be increasingly sustainable, both environmentally and economically.”

More information:
ACIMIT
Source:

ACIMIT

09.02.2023

AVK Innovation Award 2023 – Submissions until 14 April

The The German Federation of Reinforced Plastics (AVK) is looking for the best innovations in the field of fibre-reinforced plastics (FRP) / composites covering the following categories:

  • Innovative products/components or applications
  • Innovative procedures/processes
  • Research and science

One goal of the AVK Innovation Award is to promote new products/components and applications made from fibre-reinforced plastics (FRP) and to promote new processes and methods for the manufacturing of FRP products. A further award is given to universities, colleges and institutes for outstanding work in science and research. In each of the categories special emphasis will be placed on the issue of sustainability.

Another goal is to give prominence to the innovations and also to the companies/institutions behind them, thus publicising their performance throughout the industry. The submissions will be evaluated by a jury of experts from the composites sector. The award ceremony will be held during the JEC Forum DACH event in Salzburg, Austria (24-25 October 2023).

The The German Federation of Reinforced Plastics (AVK) is looking for the best innovations in the field of fibre-reinforced plastics (FRP) / composites covering the following categories:

  • Innovative products/components or applications
  • Innovative procedures/processes
  • Research and science

One goal of the AVK Innovation Award is to promote new products/components and applications made from fibre-reinforced plastics (FRP) and to promote new processes and methods for the manufacturing of FRP products. A further award is given to universities, colleges and institutes for outstanding work in science and research. In each of the categories special emphasis will be placed on the issue of sustainability.

Another goal is to give prominence to the innovations and also to the companies/institutions behind them, thus publicising their performance throughout the industry. The submissions will be evaluated by a jury of experts from the composites sector. The award ceremony will be held during the JEC Forum DACH event in Salzburg, Austria (24-25 October 2023).

The submission deadline for the application documents is 14th April 2023.
Further details and assessment criteria can be found online.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

(c) adidas AG
08.02.2023

adidas and Stella McCartney present Spring / Summer 23 Collection

Stella McCartney hosted a party in L.A in celebration of her 18 year partnership with adidas and to present its new Spring/Summer 23 collection. Kicking off the biggest weekend in music, the collaboration took over LA’s famous Henson Recording Studios for an iconic evening that brought together music and fashion.

​A collaboration that has always pushed the limits, from innovation and sport style to working with pioneers across fashion, music and art, the party celebrated a partnership that continues to champion individual expression and inspires the new wave of trailblazers. ​Together, adidas and Stella McCartney are committed to finding new ways to create and support a better future through the fusion of recycled materials and key performance technologies.

The key collections showcased at the party include:​

Stella McCartney hosted a party in L.A in celebration of her 18 year partnership with adidas and to present its new Spring/Summer 23 collection. Kicking off the biggest weekend in music, the collaboration took over LA’s famous Henson Recording Studios for an iconic evening that brought together music and fashion.

​A collaboration that has always pushed the limits, from innovation and sport style to working with pioneers across fashion, music and art, the party celebrated a partnership that continues to champion individual expression and inspires the new wave of trailblazers. ​Together, adidas and Stella McCartney are committed to finding new ways to create and support a better future through the fusion of recycled materials and key performance technologies.

The key collections showcased at the party include:​

  • ICONS: Blending sport and style through contemporary cuts, the capsule sees iconic adidas by Stella McCartney designs reimagined in staple shades of black, grey and white – providing next-gen athletes with a timeless blank canvas to move with purpose. Featured for the first time is the Sportswear Run Shoe, an all-new gender-neutral silhouette made in part from natural and renewable materials.​
  • TRUENATURE: Designed for exploring the world outside, the collection captures a contemporary take on Earth and weather satellite images alongside conceptual contours and ley lines of maps. With leading technologies such as Parley Ocean Plastic and WIND.RDY, the collection has been crafted to protect the next generation of active activists.
Source:

adidas AG

(c) Messe Frankfurt (HK) Ltd
08.02.2023

Cinte Techtextil China 2023 set for September

With China easing its pandemic restrictions, foreign exhibitors and buyers can look forward to quarantine-free travel when participating at this year’s industry showcase in Shanghai. The technical textile and nonwovens fair is scheduled to take place from 19 – 21 September 2023 at the Shanghai New International Expo Centre, amid positive market forecasts for both sectors. The organisers are anticipating a strong showing and the conclusion of an inconsistent period for in-person textile business.

“The industry has demonstrated incredible patience and resilience over the course of the pandemic,” said Ms Wilmet Shea, General Manager of Messe Frankfurt (HK) Ltd. “With both markets growing and China opening its borders, we are excited at the prospect of providing participants with an international, business-friendly platform and expect to welcome a healthy number of exhibitors later this year.”

With China easing its pandemic restrictions, foreign exhibitors and buyers can look forward to quarantine-free travel when participating at this year’s industry showcase in Shanghai. The technical textile and nonwovens fair is scheduled to take place from 19 – 21 September 2023 at the Shanghai New International Expo Centre, amid positive market forecasts for both sectors. The organisers are anticipating a strong showing and the conclusion of an inconsistent period for in-person textile business.

“The industry has demonstrated incredible patience and resilience over the course of the pandemic,” said Ms Wilmet Shea, General Manager of Messe Frankfurt (HK) Ltd. “With both markets growing and China opening its borders, we are excited at the prospect of providing participants with an international, business-friendly platform and expect to welcome a healthy number of exhibitors later this year.”

The global technical textile and nonwovens markets are both set to perform strongly over the next few years. According to Grand View Research, the technical textile market is forecast to expand at a CAGR of 4.7% from 2022 to 2030[1]. The nonwoven fabrics market is anticipated to display an even stronger CAGR of 5.6% during the same period[2], with Asia-Pacific to maintain its position as the biggest regional market.

As one of Asia’s leading trade fairs for the abovementioned sectors, Cinte Techtextil China is the preferred platform for multiple industry players. Speaking at the previous edition in 2021, Mr Seven Shen, Sales Manager at Libero Trading (Shanghai) Co Ltd, China, said: “We have been exhibiting at this fair for years, and know we will meet our target customers at every edition. The buyers here are all highly specialised.”

During his interview at the same edition, Mr Eric Ni, Senior Manager, China Supply Chain Marketing for Cotton Council International, USA, commented: “We hope to use this platform to meet more companies and brands in the nonwovens industry who are interested in US cotton, and to meet up with old friends to discuss the current situation and industry trends. The fair’s buyers are quality, and we have found some new potential clients at this edition.”

Many buyers at the previous edition also gave positive appraisals. “As a professional trade fair for technical textile and nonwoven products, Cinte Techtextil China is not only a platform to gather qualified industry players, but also the best place to showcase new products and innovations,” said Mr Lin Bin, Technical Director at Zhejiang Xinna Medical Device Technology Co Ltd, China. “Specific and high quality products enhance sourcing efficiency for buyers, and exposure to new trends and market developments ensures my company visits here regularly.”

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

[1] “Technical Textile Market Size, Share & Trends Analysis Report 2022-2030”, 2022, Grand View Research, https://bit.ly/3IAxQIK, (Retrieved: January 2023)
[2] “Nonwoven Fabrics Market Size”, 7 September 2022, GlobeNewswire, https://bit.ly/3CxPE3u, (Retrieved: January 2023)

Source:

Messe Frankfurt (HK) Ltd

03.02.2023

Cellulose Fibres Conference 2023 publishes program

International experts will discuss topics along the entire cellulose fibre value chain at the upcoming Cellulose Fibres Conference, 8–9 March 2023 in Cologne and online.

How can the cellulose fibre industry contribute to the sustainability and circularity of the textile sector? How can fibre markets achieve a circular economy for their materials? What are the most sustainable technologies on the market? And, are there innovative, interesting raw materials and technologies worth exploring to meet the challenges of the coming years?

These and other questions in the field of cellulose fibres will be discussed within the program of the Cellulose Fibres Conference 2023. The two-day event will provide insights into the latest developments of the cellulose fibre sector and introduce innovative start-ups, technologies as well as novel fibre applications. A special focus will be set on the textile sector and its awaited paradigm shift towards circular economy in the following years.

Seven sessions will provide in depth views from fibre production to recycling, policy and market trends:

International experts will discuss topics along the entire cellulose fibre value chain at the upcoming Cellulose Fibres Conference, 8–9 March 2023 in Cologne and online.

How can the cellulose fibre industry contribute to the sustainability and circularity of the textile sector? How can fibre markets achieve a circular economy for their materials? What are the most sustainable technologies on the market? And, are there innovative, interesting raw materials and technologies worth exploring to meet the challenges of the coming years?

These and other questions in the field of cellulose fibres will be discussed within the program of the Cellulose Fibres Conference 2023. The two-day event will provide insights into the latest developments of the cellulose fibre sector and introduce innovative start-ups, technologies as well as novel fibre applications. A special focus will be set on the textile sector and its awaited paradigm shift towards circular economy in the following years.

Seven sessions will provide in depth views from fibre production to recycling, policy and market trends:

  • Strategies, Policy Framework of Textiles and Market Trends,
  • Circular Economy and Recyclability of Fibres,
  • Alternative Feedstocks and Supply Chains,
  • Innovation Award “Cellulose Fibre Innovation of the Year 2023″,
  • Sustainability and Environmental Impacts,
  • Ionic Liquids and New Technologies for Pulps, Fibres and Yarns,
  • New Technologies and Applications beyond Textiles.

The full conference program is available here.

Source:

nova-Institut für politische und ökologische Innovation GmbH

01.02.2023

Carbios appoints new Executive Committee Members

Carbios has strengthened its leadership team with the appointment of Martine Brisset as Senior Vice President from 1 January 2023. Martine will manage the Biodegradation Division and supervise the Human Resources, Legal, Regulatory, Project Management, Quality Health and Safety departments. Martine Brisset joins the Group’s Executive Committee, as does Delphine Denoizé, who remains Innovation Programs Funding, Regulation and LCA Director with an expanding team.

Carbios has strengthened its leadership team with the appointment of Martine Brisset as Senior Vice President from 1 January 2023. Martine will manage the Biodegradation Division and supervise the Human Resources, Legal, Regulatory, Project Management, Quality Health and Safety departments. Martine Brisset joins the Group’s Executive Committee, as does Delphine Denoizé, who remains Innovation Programs Funding, Regulation and LCA Director with an expanding team.

Martine Brisset has over 30 years of General Management experience in international groups within the plastic and paper packaging industry, most notably at Amcor, Huhtamaki, Linpac and Klockner Pentaplast.  Since 2021, she has held the position of General Manager of Carbiolice in order to integrate this high-potential subsidiary dedicated to biodegradation within the Carbios Group. In her new position as Senior Vice President of Carbios, her main mission will be to successfully deploy the biodegradation technology, facilitate the international expansion of Carbios’ activities, organise the recruitment and training of the Group’s employees. With numerous recruitments planned throughout the company in 2023, building Carbios’ attractivity will be a strategic topic.

After several years working in innovation within the agricultural industry, Delphine Denoizé joined the Carbios in 2016 and was one of its first twenty employees. Initially in charge of Innovation Funding and Regulation, then Project Management for PET biorecycling, she now oversees all the Group’s projects. Her responsibilities include French and European public funding for innovation, regulatory compliance of processes and products around the world, and assessment of their environmental impact through specific tools such as Life Cycle Assessment.

More information:
Carbios Recycling plastics
Source:

Carbios

(c) Beste Spa
01.02.2023

Beste x HeiQ AeoniQ™ launch first collection

Beste x HeiQ AeoniQ™ announce their partnership with the launch of a capsule in the CARPINI collection at Milano Unica. The fabrics including HeiQ AeoniQ™ are crafted by the Italian textiles manufacturer Beste, well known for supplying high-end fabrics for premium and luxury brands.

The fabrics capsule collection for S/S 24 includes 12 articles made with 100% HeiQ AeoniQ™, linen, and HeiQ AeoniQ™ blends, and cotton and HeiQ AeoniQ™ blends in several different proportions.
The collection is named FLOW, as related to the movement of water and air to be in tune with Nature’s balance and rhythm, with a color range including hay, black, water, caramel, violet, dust, denim, lime, and cobalt.

With this initiative, Beste becomes the first partner to incorporate the HeiQ AeoniQ™ fiber into its active fabric portfolio, and also its Tessuteka, the library that keeps all the fabrics produced by the company since 1993.

Beste x HeiQ AeoniQ™ announce their partnership with the launch of a capsule in the CARPINI collection at Milano Unica. The fabrics including HeiQ AeoniQ™ are crafted by the Italian textiles manufacturer Beste, well known for supplying high-end fabrics for premium and luxury brands.

The fabrics capsule collection for S/S 24 includes 12 articles made with 100% HeiQ AeoniQ™, linen, and HeiQ AeoniQ™ blends, and cotton and HeiQ AeoniQ™ blends in several different proportions.
The collection is named FLOW, as related to the movement of water and air to be in tune with Nature’s balance and rhythm, with a color range including hay, black, water, caramel, violet, dust, denim, lime, and cobalt.

With this initiative, Beste becomes the first partner to incorporate the HeiQ AeoniQ™ fiber into its active fabric portfolio, and also its Tessuteka, the library that keeps all the fabrics produced by the company since 1993.

For Carlo Centonze, HeiQ’s CEO “the partnership with Beste makes total sense for all the values embodied by HeiQ AeoniQ™ that we both share, namely its commitment to circular ethics, practice and promote sustainability, and have a positive impact in the environment while also creating new business opportunities that the market and the Planet so urgently need.”

According to Giovanni Santi, Beste’s CDA president: “Beste SpA benefit company is strongly committed to developing a positive and responsible impact over the environment and the social fabric it is surrounded by. To meet this precise criterion, we use HeiQ AeoniQ™, a new biodegradable fiber developed by HeiQ, a Swiss chemical company that is Beste's constant partner in this indispensable green revolution. The introduction of HeiQ AeoniQ™, namely a fiber that is cellulosic in nature but with characteristics and performances similar to polyester ones, concerns a significant step in the reduction of CO2 emissions and plastics. It is not only a responsible choice, but it also deals with a precise and courageous positioning in the constant battle in favor of our planet by starting from the textile innovation front.”

The new Beste x HeiQ AeoniQ™ fabrics will be displayed at Beste’s booth during the Milano Unica trade show from January 31st to February 2nd, in Milan, Italy.

More information:
HeiQ AeoniQ Beste Milano Unica
Source:

HeiQ

(c) INDA
01.02.2023

FiltXPO™ 2023 taking place in October

Global leading companies from more than 15 countries in the filtration and separation industry will connect with some 1,500 industry professionals and launch their innovations at FiltXPO™ 2023, Oct. 10-12, at Navy Pier in Chicago, Illinois.

FiltXPO™, an exhibition and conference dedicated exclusively to filtration and separation, is now being held on an 18-month cycle, making it a valuable opportunity to generate new business and grow global relationships with unique exposure to the North American market, according to INDA.

FiltXPO™ will draw senior-level professionals from around the world in major market segments involved in the design, manufacture, sales, and use of filtration/separation products and services.

A feature of the event will be the technical conference – Summit for Global Change. Five panels of global industry experts will debate filtration and separation’s most compelling challenges such as indoor air quality, filtration sustainability, standards and technologies. FiltXPO™ will also offer a one-and-a-half day intensive training course on the development, testing and application of filtration and separation media.

Global leading companies from more than 15 countries in the filtration and separation industry will connect with some 1,500 industry professionals and launch their innovations at FiltXPO™ 2023, Oct. 10-12, at Navy Pier in Chicago, Illinois.

FiltXPO™, an exhibition and conference dedicated exclusively to filtration and separation, is now being held on an 18-month cycle, making it a valuable opportunity to generate new business and grow global relationships with unique exposure to the North American market, according to INDA.

FiltXPO™ will draw senior-level professionals from around the world in major market segments involved in the design, manufacture, sales, and use of filtration/separation products and services.

A feature of the event will be the technical conference – Summit for Global Change. Five panels of global industry experts will debate filtration and separation’s most compelling challenges such as indoor air quality, filtration sustainability, standards and technologies. FiltXPO™ will also offer a one-and-a-half day intensive training course on the development, testing and application of filtration and separation media.

(c) Archroma
27.01.2023

FiberColors*: Upcycling textile waste into colors

With the Earth population reaching 8 billion in November 2022, the need to address the issue of textile waste becomes more critical.

According to earth.org, 92 million tons of textile waste is produced every year, a number that is expected to soar to 134 million tons by the end of the decade. Around 85% of all textiles discarded in the US are said to end up in landfills, leading to land and water pollution impacting first and foremost local communities.

Archroma, a company who creates colors for fashion, decided to look at the issue creatively: what if it could create colors from waste fashion?
The company had already developed a way to turn waste from the herbal and food industry into its range of EarthColors® featured by brands such as G-Star, Patagonia, Esprit, Tom Taylor, Pangaia, UGG, and Primark. Now they are is introducing a new innovation: the FiberColors* technology.

With the Earth population reaching 8 billion in November 2022, the need to address the issue of textile waste becomes more critical.

According to earth.org, 92 million tons of textile waste is produced every year, a number that is expected to soar to 134 million tons by the end of the decade. Around 85% of all textiles discarded in the US are said to end up in landfills, leading to land and water pollution impacting first and foremost local communities.

Archroma, a company who creates colors for fashion, decided to look at the issue creatively: what if it could create colors from waste fashion?
The company had already developed a way to turn waste from the herbal and food industry into its range of EarthColors® featured by brands such as G-Star, Patagonia, Esprit, Tom Taylor, Pangaia, UGG, and Primark. Now they are is introducing a new innovation: the FiberColors* technology.

With this technology, Archroma upcycles textile waste into colors. The colors are synthesized from a minimum content of 50% waste-based raw material.
R&D experts have developed a way to use cotton and/or polyamide and their blends (with a >95% purity) to substitute the major part of the petroleum-based raw material usually used to make dyestuff.

The resulting FiberColors* range, which is patent-pending and therefore exclusive to Archroma, includes five dyes covering a palette of timeless shades: Diresul® Fiber-Teak (brown shades), Diresul® Fiber-Ochre (olive shades), Diresul® Fiber-Maroon (bordeaux shades), Diresul® Fiber-Slate (blue grey shades) and Diresul® Fiber-Graphite (dark grey shades).

The dyes are especially suited for cellulose fibers such as cotton, viscose, linen and kapok, and can be used in continuous, exhaust, denim and garment dyeing and printing processes.

(c) nova-Institut GmbH
24.01.2023

Six nominees for„Cellulose Fibre Innovation of the Year 2023“

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

Here are the six nominees
Vybrana – The new generation banana fibre – GenCrest Bioproducts (India)

Vybrana is a Gencrest’s Sustainable Cellulosic Fibre upcycled from agrowaste. Raw fibres are extracted from the Banana Pseudo stem at the end of the plant lifecycle. The biomass waste is then treated by the Gencrest patented Fiberzyme technology. Here, cocktail enzyme formulations remove the high lignin content and other impurities and help fibre fibrillation. The company's proprietary cottonisation process provides fine, spinnable cellulose staple fibres suitable for blending with other staple fibres and can be spun on any conventional spinning systems giving yarns sustainable apparel. Vybrana is produced without the use of heavy chemicals and minimized water consumption and in a waste-free process where balance biomass is converted to bio stimulants Agrosatva and Bio Fertilizers & organic manure.

HeiQ AeoniQ™ – technology for more sustainability of textiles – HeiQ (Austria)
HeiQ AeoniQ™ is the disruptive technology and key initiative from HeiQ with the potential to change the sustainability of textiles. It is the first climate-positive continuous cellulose filament yarn, made in a proprietary manufacturing process and the first to reproduce the properties of polyester and nylon yarns in a cellulosic, biodegradable, and endlessly recyclable fibre.
HeiQ AeoniQ™ can be manufactured from different cellulosic raw materials such as pre- and post-consumer textile waste, biotech cellulose, and non-valorized agricultural waste, such as ground coffee waste or banana peels. It naturally degrades after only 12 weeks in the soil. Each ton of HeiQ AeoniQ™ saves 5 tons of CO2 emissions. The first garments made with this innovative cellulosic filament fiber were commercially launched in January 2023.

TENCEL™ LUXE – lyocell filament yarn – Lenzing (Austria)
TENCEL™ LUXE is LENZING’s new versatile lyocell yarn that offers an urgently needed sustainable filament solution for the textile and fashion industry. A possible botanical alternative for silk, long-staple cotton, and petrol-based synthetic filaments, is derived from wood grown in renewable, sustainably managed forests, and produced in an environmentally sound, closed-loop process that recycles water and reuses more than 99 % of organic solvent. Certified by The Vegan Society, it is suitable for a wide range of applications and fabric developments, from finer high fashion propositions to denim constructions, seamless and activewear innovations, and even agricultural and technical solutions.

Nullarbor™ – Nanollose & Birla Cellulose (Australia/India)
In 2020, Nanollose & Birla Cellulose started a journey to develop and commercialize tree-free lyocell from bacterial cellulose, called Nullarbor™. The name derives from the Latin “nulla arbor” which means “no trees”. Initial lab research at both ends led to a joint patent application with the patent “production of high-tenacity lyocell fibres made from bacterial cellulose”.
Nullarbor is significantly stronger than lyocell made from wood-based pulp; even adding small amounts of bacterial cellulose to wood pulp increases the fibre toughness. In 2022, the first pilot batch of 260kg was produced with 20 % bacterial pulp share. Several high-quality fabrics and garments were produced with this fibre. The collaboration between Nanollose & Birla Cellulose now focuses on increasing the production scale and amount of bacterial pulp in the fibre.

Circulose® – makes fashion circular – Renewcell (Sweden)
Circulose® made by Renewcell is a branded dissolving pulp made from 100 % textile waste, like worn-out clothes and production scraps. It provides a unique material for fashion that is 100 % recycled, recyclable, biodegradable, and of virgin-equivalent quality. It is used by fibre producers to make staple fibre or filaments like viscose, lyocell, modal, acetate or other types of man-made cellulosic fibres. In 2022, Renewcell, opened the world’s first textile-to-textile chemical recycling plant in Sundsvall, Sweden – Renewcell 1. The plant will eventually reach 120,000 tons of annual capacity.

Sparkle sustainable sanitary pads – Sparkle Innovations (United States)
Globally, around 300 billion period products are discarded every year, resulting in millions of tons of non-biodegradable waste. Since most conventional sanitary pads contain up to 90 % plastics, they do not biodegrade for around 600 years. Sparkle has designed sustainable, plastic-free, biodegradable and compostable Sparkle sanitary pads. From product to packaging, they are made up of around 90 % cellulose-based materials with top sheet, absorbent core, release paper, wrapping paper and packaging made of cellulose-based fibres. Whether Sparkle pads end up in a compost pit, are incinerated or end up in a landfill, they are a more sustainable alternative compared to conventional pads that contain large amounts of plastics, complex petro-chemical based ingredients and artificial fragrances. When tested according to ISO 14855-1 by a leading independent lab in Europe, Sparkle pads reached over 90 % absolute biodegradation within 90 days in commercial composting conditions.

19.01.2023

Alliance of the Willing at Berlin Fashion Week: VORN, Zalando, Unity and Kornit Digital

Kornit Digital LTD. (NASDAQ: KRNT) ("Kornit" or the "Company"), a market leader in sustainable, on-demand digital fashion and textile production technologies, announced its partnership with VORN – The Berlin Fashion Hub, Zalando, and Unity – creating an "alliance of the willing" to transform the industry via "phygital" fashion with a circular approach.

Kornit Digital LTD. (NASDAQ: KRNT) ("Kornit" or the "Company"), a market leader in sustainable, on-demand digital fashion and textile production technologies, announced its partnership with VORN – The Berlin Fashion Hub, Zalando, and Unity – creating an "alliance of the willing" to transform the industry via "phygital" fashion with a circular approach.

Nine designers were challenged to create fashion capsules in eight weeks utilizing the latest technology innovations from the three alliance partners – combining digital product creation, web3-based design, digital printing, immersive circular design, 3D rendering and avatar development. All collections are on display exclusively at Berlin Fashion Week from Wednesday, January 18 to Friday, January 20 at Bikini Berlin.
 
The challenge follows standing room only Kornit Fashion Week events across the globe, displaying how on-demand, digital production creates a fashion world of nearly endless creativity. Hosted at the Impact Hub Berlin, the VORN Academy Program offered creators access to a holistic technology toolset - including the advanced Kornit Presto MAX single-step solution for direct-to-fabric sustainable printing. Some of the prominent designers taking part include costume and fashion designer Alexis Mersmann, Judith Bondy, AR and NFT artist Ann-Britt Dittmar, Berlin-based director Tanja Bombach, Nina Jurcic, Olga Boncheva, digital artist, and fashion designer Schirin Negahbani, Johann Erhardt, and Israeli designer Idan Yoav.
 
"This collaboration across four industry leaders is so unique because the result is a sum so much greater than each of its individual parts. It's a true 'alliance of the willing' that opens doors to 'phygital' collections built at the intersection of digital fashion, 3D design, and on-demand production," said Omer Kulka, Chief Innovation Officer at Kornit Digital. "We're honored to team with VORN – The Berlin Fashion Hub, Zalando, and Unity during Berlin Fashion Week to demonstrate what's possible as the physical and virtual fashion worlds come together."
 
"When we launched the Berlin Fashion Hub, our intent was to create a B2B environment to spark unmatched fashion and sustainability innovations. As Berlin is one of the world's most important fashion and textile centers, there is no better place to demonstrate economically succesful circularity in the fashion industry," said Professor Marte Hentschel, Co-Founder at VORN – The Berlin Fashion Hub. "Together, we're changing fashion to drive sustainability and harness the creative power of both the physical and virtual. We're proud of what's been accomplished in conjunction with an incredible group of designers, creators, and partners."

Source:

Kornit

(c) FET Ltd
17.01.2023

FET looks forward following sucessful year

Fibre Extrusion Technology Limited (FET) of Leeds, England, a supplier of laboratory and pilot melt spinning systems, is celebrating a record breaking year of sales and product innovation. “Sales revenue for 2022 has easily beaten our previous high” said FET Managing Director, Richard Slack “and the research projects we have collaborated in have become increasingly challenging in terms of technical specification.”

Prestigious new projects during 2022 included a multifilament melt spinning line for Senbis Polymer Innovations, Netherlands enabling the development of textile fibres from recycled polymers or biopolymers; a FET-200LAB wet spinning system at the University of Manchester which will play a major part in advanced materials research in collaboration with the renowned Henry Royce Institute; and a FET-103 Monofilament line for RHEON LABS of London to help develop a hyper viscoelastic fibre from RHEON™ which displays high strain-rate sensitive properties. The latter two of these examples were aided by significant UK grants to develop advanced materials.

Fibre Extrusion Technology Limited (FET) of Leeds, England, a supplier of laboratory and pilot melt spinning systems, is celebrating a record breaking year of sales and product innovation. “Sales revenue for 2022 has easily beaten our previous high” said FET Managing Director, Richard Slack “and the research projects we have collaborated in have become increasingly challenging in terms of technical specification.”

Prestigious new projects during 2022 included a multifilament melt spinning line for Senbis Polymer Innovations, Netherlands enabling the development of textile fibres from recycled polymers or biopolymers; a FET-200LAB wet spinning system at the University of Manchester which will play a major part in advanced materials research in collaboration with the renowned Henry Royce Institute; and a FET-103 Monofilament line for RHEON LABS of London to help develop a hyper viscoelastic fibre from RHEON™ which displays high strain-rate sensitive properties. The latter two of these examples were aided by significant UK grants to develop advanced materials.

FET is now looking forward to 2023 with a record order book. The company’s newly opened Fibre Development Centre features over £1.5 million investment in customer laboratory systems that will further enable fibre trials and product R&D. Three new polymer types were developed with clients in 2022 and several more are lined up in 2023, which is expected to bring the total of different polymer types to more than 40 in multifilament, monofilament and nonwoven formats.

FET will be exhibiting at two major exhibitions in 2023; INDEX 23, a leading Nonwovens show at Geneva in April; and ITMA, Milan, an international textile and garment technology exhibition in June.

Source:

FET Ltd

17.01.2023

Freudenberg Performance Materials: New brand for filter media

Freudenberg Performance Materials announces the launch of Filtura, its new product brand for filter media solutions. Filtura is a comprehensive portfolio of innovative high-performance filter media products and customized solutions for air and liquid filtration. The company is debuting Filtura at Filtech, the international trade fair for the filtration technology industry, in Cologne in February 2023.

Freudenberg Performance Materials’ established Colback®, Enka®solutions, Evolon®, Karbofil and Lutradur® brands are being brought together under the Filtura brand. With the new brand, the specialist for technical textiles is pooling its know-how more effectively across products lines and giving innovations for the filter media market a further boost. Filtura will enable Freudenberg Performance Materials to extend its position in this market.

Freudenberg Performance Materials announces the launch of Filtura, its new product brand for filter media solutions. Filtura is a comprehensive portfolio of innovative high-performance filter media products and customized solutions for air and liquid filtration. The company is debuting Filtura at Filtech, the international trade fair for the filtration technology industry, in Cologne in February 2023.

Freudenberg Performance Materials’ established Colback®, Enka®solutions, Evolon®, Karbofil and Lutradur® brands are being brought together under the Filtura brand. With the new brand, the specialist for technical textiles is pooling its know-how more effectively across products lines and giving innovations for the filter media market a further boost. Filtura will enable Freudenberg Performance Materials to extend its position in this market.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

(c) MUNICH FABRIC START
13.01.2023

MUNICH FABRIC START announces programme for upcoming event

The Munich Fabric Start Exhibitions GmbH announces the programme for the upcoming editions of MUNICH FABRIC START (24 to 26 January 2023) and BLUEZONE & KEYHOUSE (24 and 25 January 2023).
From 24 to 26 January 2023, visitors can expect a range of the latest trends, fabric, accessories and denim highlights from around 900 international exhibitors, an event programme with expert panels, keynotes and trend lectures, as well as numerous networking opportunities.

Economic Environment
Conflicts, inflation, recession, energy crisis, massive inequality, climate change - how companies can position themselves securely in a volatile market environment - this is deciphered by trend analyst David Shah in his key note "Self-Empowerment" and numerous industry experts, futurologists and leading fashion editors in the lecture series "The Status Quo of Fashion" by strategy and communication consultants Alex Vogt and Jana Kern.

The Munich Fabric Start Exhibitions GmbH announces the programme for the upcoming editions of MUNICH FABRIC START (24 to 26 January 2023) and BLUEZONE & KEYHOUSE (24 and 25 January 2023).
From 24 to 26 January 2023, visitors can expect a range of the latest trends, fabric, accessories and denim highlights from around 900 international exhibitors, an event programme with expert panels, keynotes and trend lectures, as well as numerous networking opportunities.

Economic Environment
Conflicts, inflation, recession, energy crisis, massive inequality, climate change - how companies can position themselves securely in a volatile market environment - this is deciphered by trend analyst David Shah in his key note "Self-Empowerment" and numerous industry experts, futurologists and leading fashion editors in the lecture series "The Status Quo of Fashion" by strategy and communication consultants Alex Vogt and Jana Kern.

Next to David Shah (View-Publications), the panel will include Siems Luckwaldt (CAPITAL and BUSINESS PUNK, RTL Germany), Shamin Vogel (WeAr Global Magazine), Ben Hanson (The Interline), Maria Cristina Pavarini (The SPIN OFF) and Carl Tillessen (DMI)

Digital Era
From digital colour apps, digital twins and virtual models to 3D simulation and virtual dressing rooms - the world of digital fashion will not only be discussed in numerous lectures in Munich, but also brought to life in the new Assyst Experience. Whether it's Carola Seybold, Head of Global Key Accounts at Pantone, Jan Hilger from Roland Berger, Arndt Johannes from Verce, Dr. Stefan Hauswiesner, CEO of Reactive Reality or the experts of the panel "Textilfabrik X.0 - New Marketing Buzz Words or One Step Ahead": everyone will be looking at virtual fashion from a different angle and providing insights into the latest state of the art. In her trend presentation "The weird & wonderful world of fashion cores" at BLUEZONE, Angela Velasquez (Rivet) sheds light on how viral TikTok trends are reshaping denim merchandising.

Sustainable Future
Digitisation and sustainability - the third major theme of the event programme - could not be more closely intertwined. Lisa Lang, Director of Policy & EU Affairs Orchestrator of EIT Climate KIC in an interview with Muchaneta ten Napel (Shape Innovate) kicks things off about the importance of a green transformation for the industry. Other topics in focus: Liv Simpliciano from Fashion Revolution gives an overview of where the world's biggest fashion brands and retailers stand in terms of transparency. Tricia Carey from Renewcell, David Shah (View-Publications), Lien van der Schueren and Guy Buyle (CISUTAC & HEREWEAR), Mateusz Wielopolski (Circulix) and Mario Malzacher (Circular.Fashion) critically discuss whether the circular economy is really the solution for everything or just a placebo. Circular ecosystems are also presented by Franziska von Becker from Hachmeister & Partner.

The race of the new sustainable materials of the future will be opened by Kirsi Terho from Infinited Fiber, Kuben Edwards from Onezero8, Marianne Uddman from Trustrace and Simon Angel, Sustainable Innovations Curator of MUNICH FABRIC START in a panel discussion with Muchaneta ten Napel (Shape Innovate). New products for a sustainable future in the denim industry will be discussed at BLUEZONE.
Another highlight: In cooperation with the Transformers Foundation, an expert panel will also be held at BLUEZONE on both days of the trade show.

Trends Spring.Summer 2024
Gerd Müller-Thomkins, Carl Tillessen and Niels Holger Wien from the Deutsches Mode Institut (DMI) see a "vibe shift" - a turning point. They will analyse what this means for fashion in their trend presentation on Wednesday. The Women's Fashion Trends SS 24 with the must haves of the season will be analysed by Karin Schmitz from the Trend Forecast Institute Peclers Paris - from the glamorous appearance in everyday life, to the play with gender identity, to simplicity combined with functionality and mobility.

Source:

MUNICH FABRIC START / KERN. Consulting

(c) adidas AG
SS23 Melbourne Tennis Collection - Felix Auger Aliassime
13.01.2023

adidas introduces the new SS23 Melbourne Tennis Collection

  • adidas unveils its SS23 Melbourne Tennis Collection – an apparel range fit for performance
  • Inspired by plants and florals, the collection features bold prints, vibrant colorways and a moiré effect textile
  • The adidas SS23 Melbourne Tennis Collection will be available from Jan 13 2023

adidas launches its new SS23 Melbourne Tennis Collection, a range of performance apparel featuring striking colorful prints, inspired by plant life and nature. Select pieces feature a contrast-color mesh layering that when in motion creates a moiré effect and helps to mask the player’s movements and positioning on court.

With the help of innovation, adidas is seeing possibilities in turning towards new resources. For these products adidas turned to a greenhouse gas technology. It uses captured industrial emissions as a new material feedstock. CO2 is fermented into ethanol which constitutes 30% by weight of a polyester yarn. adidas knitted this yarn into various products and now this carbon-based ethanol makes up a minimum of 15% by weight of these garments.

  • adidas unveils its SS23 Melbourne Tennis Collection – an apparel range fit for performance
  • Inspired by plants and florals, the collection features bold prints, vibrant colorways and a moiré effect textile
  • The adidas SS23 Melbourne Tennis Collection will be available from Jan 13 2023

adidas launches its new SS23 Melbourne Tennis Collection, a range of performance apparel featuring striking colorful prints, inspired by plant life and nature. Select pieces feature a contrast-color mesh layering that when in motion creates a moiré effect and helps to mask the player’s movements and positioning on court.

With the help of innovation, adidas is seeing possibilities in turning towards new resources. For these products adidas turned to a greenhouse gas technology. It uses captured industrial emissions as a new material feedstock. CO2 is fermented into ethanol which constitutes 30% by weight of a polyester yarn. adidas knitted this yarn into various products and now this carbon-based ethanol makes up a minimum of 15% by weight of these garments.

In addition, the collection also utilizes HEAT.RDY and Aeroready technologies. HEAT.RDY technology is designed to maximize airflow and optimize sweat distribution, while AEROREADY is powered by moisture-wicking fabric that absorbs sweat quickly for a dry feeling, helping players to move freely and comfortably on court.

The SS23 Melbourne Tennis Collection will be premiered on court by adidas athletes, including Stefanos Tsitsipas, Felix Auger Aliassime, Garbiñe Muguruza, Qiang Wang and Maria Sakkari.

The SS23 Melbourne Tennis Collection will be available from Jan 13.

More information:
adidas Sportswear polyester yarns
Source:

adidas AG

05.01.2023

India ITME 2022: Empowering Textile Through Technology

The 11th edition of India ITME 2022, a textile engineering and technology B2B Exhibition, was hosted in IEML, Greater Noida, U.P. under participation from 68 countries. It showcased more than 1600  Live machinery and unveiled 69 new products.

After a gap of six years, the event recorded a high flow of quality visitors - approx. 87,400 unique visitors - which included industry members, technocrats, academicians, students and government officials apart from the delegations from 13 countries lead by senior officials of respective country who are looking to engage with India as sourcing and trade partner for developing their textile industry.

The high-profile technology & engineering exhibition for textiles witnessed participation from leading Indian institutes for textile engineering such as VJTI Mumbai, DKTE Ichalkaranji where MOU’s were signed for knowledge exchange with Swiss Textile Machinery Association and Italian Textile Machinery Association, paving way for collaboration not only in business but also in technical education.

The 11th edition of India ITME 2022, a textile engineering and technology B2B Exhibition, was hosted in IEML, Greater Noida, U.P. under participation from 68 countries. It showcased more than 1600  Live machinery and unveiled 69 new products.

After a gap of six years, the event recorded a high flow of quality visitors - approx. 87,400 unique visitors - which included industry members, technocrats, academicians, students and government officials apart from the delegations from 13 countries lead by senior officials of respective country who are looking to engage with India as sourcing and trade partner for developing their textile industry.

The high-profile technology & engineering exhibition for textiles witnessed participation from leading Indian institutes for textile engineering such as VJTI Mumbai, DKTE Ichalkaranji where MOU’s were signed for knowledge exchange with Swiss Textile Machinery Association and Italian Textile Machinery Association, paving way for collaboration not only in business but also in technical education.

The six-day event carried forward its theme “Empowering Textile Through Technology” encouraging indigenously developed innovations and research by Indian companies.

The six-day event set the foundation for upgradation and modernization of the textile industry of India which is the 2nd largest employment generation sector after agriculture.

Source:

ITME

Zyler
05.01.2023

Zyler: Virtual try-on in fashion stores

  • Digital display experience platform, Raydiant, partners with Zyler to offer virtual try-on to fashion retailers in-store.

Digital display experience platform, Raydiant, is now offering an exciting new virtual try-on solution to their fashion retail customers. Virtual try-on is brought to stores by Zyler, fashion technology that allows customers to see themselves in any outfit without having to physically try them on.

This means that retail spaces can be transformed, maximizing space and making use of the latest innovations in fashion. When customers see themselves in items before purchase, they are more excited about the products, their confidence is boosted, and the brand becomes more inclusive. Customers shop and buy more, and are less likely to return the products they purchase. Raydiant presents this new virtual try-on offering in combination with their digital signage solutions.

  • Digital display experience platform, Raydiant, partners with Zyler to offer virtual try-on to fashion retailers in-store.

Digital display experience platform, Raydiant, is now offering an exciting new virtual try-on solution to their fashion retail customers. Virtual try-on is brought to stores by Zyler, fashion technology that allows customers to see themselves in any outfit without having to physically try them on.

This means that retail spaces can be transformed, maximizing space and making use of the latest innovations in fashion. When customers see themselves in items before purchase, they are more excited about the products, their confidence is boosted, and the brand becomes more inclusive. Customers shop and buy more, and are less likely to return the products they purchase. Raydiant presents this new virtual try-on offering in combination with their digital signage solutions.

Source:

Anthropics Technology

Photo Pure Denim
03.01.2023

PureDenim & Bemberg ™: “Blue di Cupro” collection at Pitti Uomo

In occasion of the next edition of Pitti Uomo, Bemberg™ by Asahi Kasei – the unique fiber with a circular economy footprint obtained from cotton linters through a closed-loop process ensuring certified sustainability credentials through its transparent and traceable approach- reveals a very special Bemberg™ fabrics smart range dedicated to premium denimwear.

In occasion of the next edition of Pitti Uomo, Bemberg™ by Asahi Kasei – the unique fiber with a circular economy footprint obtained from cotton linters through a closed-loop process ensuring certified sustainability credentials through its transparent and traceable approach- reveals a very special Bemberg™ fabrics smart range dedicated to premium denimwear.

This has been made possible thanks to the partnership with PureDenim, a leading Italian company whose strategy since 10 years is based on an entire re-design of the production system, inspired by circular economy principles that combines technology and innovative materials in order to offer the highest levels of design, innovation and real responsible values derived from an holistic approach to sustainability.
The “Blue di Cupro” collection is made with seven fabrics made with Bemberg™, either 100% Bemberg™ or in blend with cotton, wool, and it applies the most advanced Pure Denim Technologies. The Blue di cupro fabrics made with Bemberg™ will also be dyed with “Smart Indigo” an indigo dye technology internally produced by PureDenim, through a chemical-free production. The only elements involved are: water, indigo pigments, and electricity. In terms of finishing, fabrics’ looks and performances are enhanced by the “Eco Sonic” ultrasounds finishing technology which brings significant reduction of water used, increased aesthetic features and controlled discoloration. And last but not least every yarn used at PureDenim is protected by NaturalReco® a 100% natural product that completely SUBSTITUTE the use of plastic films that are one of the key causes of microplastic emission for denim application.

“Blue” seems to be the new colour of Bemberg™, in fact, the company in early November 2022 announced, at the Blue Friday initiative by UNESCO's Intergovernmental Oceanographic Commission (IOC), the achievement of the OK biodegradable MARINE certification, which guarantees the biodegradability of its products even in the marine environment, as certified by TÜV AUSTRIA, meaning a lot in the context of microplastics in water issue solutions. This Bemberg™ certification’s achievement comes on top of other key ones such as the INNOVHUB report that confirms Bemberg™ biodegradability in soil without releasing hazardous substances, the RCS by Textile Exchange, and the Oeko-Tex Standard 100 and ISO 14001 corporate certifications.

Source:

C.L.A.S.S.

30.12.2022

Composites United declares membership in Composites Germany

Society and the economy are facing existential challenges. In addition to the consequences of climate change, these include the realisation that energy and many resources are no longer available in the usual quantities, so that their efficiency must be significantly increased in the short term. Lightweight construction, especially with fibre composite materials, can and will make an important contribution here, e.g. in wind power plants or hydrogen storage systems. As an umbrella organisation, Composites Germany represents the capabilities and interests of the German fibre composite industry. With the re-entry of Composites United, Composites Germany will combine the forces of the two leading composites networks in Germany and its position will be significantly strengthened. Changed framework conditions make the re-entry possible and necessary.

Society and the economy are facing existential challenges. In addition to the consequences of climate change, these include the realisation that energy and many resources are no longer available in the usual quantities, so that their efficiency must be significantly increased in the short term. Lightweight construction, especially with fibre composite materials, can and will make an important contribution here, e.g. in wind power plants or hydrogen storage systems. As an umbrella organisation, Composites Germany represents the capabilities and interests of the German fibre composite industry. With the re-entry of Composites United, Composites Germany will combine the forces of the two leading composites networks in Germany and its position will be significantly strengthened. Changed framework conditions make the re-entry possible and necessary.

VDMA and Leichtbau BW will continue to support the work of Composites Germany as associate members and contribute the know-how of their members. Together, the organisations will promote sustainable lightweight construction as a key technology for Germany, focusing on composites materials, says Prof. Klaus Drechsler of Composites United, one of the two board members of Composites Germany. As a network and mouthpiece of the composites industry, Composites Germany bundles the interests of its members. The aim is to continuously expand activities, promote innovations and technologies, develop new markets and new value chains, and anchor training and further education, adds his board colleague Dr Michael Effing of AVK. The agreement was concluded on 29 November 2022 during the JEC Forum DACH in Augsburg, where both associations were cooperation partners of the event.

Source:

Composites Germany

30.12.2022

Carbios hosts PET Biorecycling Summit

  • Scientific researchers from 10 countries, including North America, UK, Japan and Germany
  • Bertrand Piccard, Solar Impulse Foundation, as Keynote Speaker
  • Speakers from strategic partnerships: L’Oréal, Salomon, and McKinsey

Carbios hosted the first PET Biorecycling Summit from 7 to 8 December 2022 in Paris. The event attracted over 100 international participants from the scientific, academic, and industrial worlds to exchange on the advances in the field of biological recycling, and how to bring these innovations for a circular economy to market.

  • Scientific researchers from 10 countries, including North America, UK, Japan and Germany
  • Bertrand Piccard, Solar Impulse Foundation, as Keynote Speaker
  • Speakers from strategic partnerships: L’Oréal, Salomon, and McKinsey

Carbios hosted the first PET Biorecycling Summit from 7 to 8 December 2022 in Paris. The event attracted over 100 international participants from the scientific, academic, and industrial worlds to exchange on the advances in the field of biological recycling, and how to bring these innovations for a circular economy to market.

The two-day conference gathered scientists from various academic institutions to share their latest research on PET enzymatic depolymerization.  Bertrand Piccard, Initiator and Chairman of the Solar Impulse Foundation[1], joined as the Keynote Speaker for the last session focused on PET circularity, and praised Carbios’ contribution to reducing plastic pollution. The Summit concluded with a visit of Carbios’ demonstration plant in Clermont-Ferrand. The demonstration plant was inaugurated in September 2021 and brings Carbios’ technology one step closer to industrialization. Following the demonstration plant’s success, Carbios is on track to build and operate the world’s first industrial-scale enzymatic PET recycling plant (with a processing capacity of 50.000 tons of PET waste per year) in France (Longlaville) by 2025[2], and to start licensing its technology throughout the world.


[1] To address sustainability challenges while enabling economic growth, Bertrand Piccard and the Solar Impulse Foundation have identified 1000+ clean and profitable solutions. More details available on the official website.

[2] Cf. Press release dated 23 February 2022.

Source:

Carbios