From the Sector

Polyurethane has become an integral part of our daily lives, whether in the construction industry, in leisure activities, in the manufacture of furniture or in numerous other applications. The precision gear pumps from Oerlikon Barmag, which will be presented at this year's UTECH Asia / PU China 2024 in Shanghai, impress with customised solutions for demanding tasks in the chemical industry. They increase the productivity of the often complex manufacturing processes for this wide range of applications.

Oerlikon Barmag pumps handle demanding processes in PUR applications, in the chemical, plastics or paint and lacquers industries. One of the greatest challenges lies in the accurate and reliable metering of toxic or low-viscosity media. With the GM and GA series and the associated components, Oerlikon Barmag presents the optimum equipment for these applications.

GM pump
Pumps in the GM series achieve precise dosing by feeding the flow with low pulsation. The multi-stage GM pump conveys low-viscosity media even under high pressure and the most difficult operating conditions (e.g. 250 bar, 100 mPas). The standard pump for many dosing tasks is the GM series in a square design. With the development of the multi-stage pump, the range of applications for the GM series has been significantly expanded. The round 2-stage GM pump has been specially developed for use in high-pressure technology. It fulfils the special challenge of pumping small flow rates with low viscosities. The pump serves flow rates from 0.05 to 20 ccm/rev and is therefore particularly suitable for the production of PUR moulded parts, block foam, refrigeration unit insulation or sandwich panels.  

GA series
Making products and processes more efficient is a constant challenge for manufacturing companies. This is why Oerlikon Barmag has added the GA series to the GM series especially for the demanding conveying of high-viscosity media. The GA series is available in delivery volumes of 1.25 - 30 cm³/rev (0.6-144 l/h). It is designed for pressures up to 200 bar, for viscosities up to 1,500 Pas and for temperatures up to a maximum of 225°C. With this pump series, Oerlikon Barmag offers customised solutions for process engineering processes where highly accurate and uniform metering is required.

The drum pump
The drum pump from Oerlikon Barmag is specially designed for conveying and dosing highly viscous materials such as adhesives, silicones and other highly viscous materials from drums and other large containers and for pressures of up to 250 bar. One of its special features is not only that it discharges highly viscous materials from the drum, but also that the medium can be dosed directly without an intermediate stop.

The gear pump and drum follower plate are synchronised so that the plate effortlessly reaches the bottom of the container, leaving behind only a very small residual quantity of < 1%. This reduces material costs and has a positive effect on the production process.

British technology company Hypetex has been awarded a significant grant from Innovate UK to develop the world’s first technical coloured flax fibre, which will have applications in the sustainable manufacturing of cars, boats and other products that are usually made with carbon fibre.

Called FlaxTex the material is strong, lightweight and 100 per cent biodegradable, having a net positive carbon footprint at point of manufacturing. It can be colourised whilst enhancing its performance properties, with the process adding some important manufacturing attributes compared to standard flax fibre.

As such, FlaxTex’s mechanical properties represent the closest sustainable substitute for robust and lightweight materials like glass fibre and carbon fibre in composite structures.  

The performance of standard flax fibre is often hindered by its high moisture absorption, resulting in reduced structural integrity when used in composite construction. In addition, the natural brown colour of flax has been deemed unappealing for product use.

Flaxtex solves these issues by removing moisture through the colouring process and sealing the fibres, which waterproofs them and enabling their core mechanical properties. Hypetex’s patented nano-pigment technology changes the colour adding an aesthetic quality to the material.  

This colouring process is set to transform industrial design possibilities of Flax natural fibres by enhancing the strength and performance while simultaneously reducing post-processing requirements and total energy usage. This also aligns with Hypetex's commitment to supporting the green transition and helping manufacturers meet government expectations on the path to UK Net Zero targets and the European Green Deal.

Over the course of a 12-month industrial research project, Hypetex will further optimize its resin systems and processes, expanding the use of FlaxTex across various markets.  

FlaxTex has a range of industry uses, including on construction, automotive, sports equipment and furniture products.

Juki America and Coloreel revealed a partnership that will extend Coloreel’s thread dyeing technology to the sewing industry. With Coloreel, Juki sewing machines can now access millions of precise colors in real time.

Juki’s distributors will get exclusive rights to market and sell Coloreel for sewing machines within North and South America. The first official installation of Coloreel paired with a Juki sewing machine will be at FABRIC Incubator in Arizona, USA, a fashion incubator and garment manufacturer that supports up-and-coming designers.

• Continued growth in the semiconductor business
• Weak demand for carbon fibers further impacts Group sales and profitability
• Group sales down slightly at €272.6 million (-3.9%), adjusted EBITDA up 5.0% to €42.1 million
• Adjusted EBITDA margin at 15.4% after 14.1% in the same quarter of the previous year
• Outlook for 2024 confirmed

SGL Carbon had a solid start to the first quarter of 2024. Despite the slight decline in sales of 3.9% to €272.6 million (Q1 2023: €283.7 million), adjusted EBITDA improved by 5.0% to € 42.1 million (Q1 2023: € 40.1 million). Weak demand in the Carbon Fibers business unit in particular have a negative impact on the Group's sales and earnings performance. By contrast, slightly higher sales and, especially, the increase in adjusted EBITDA in the Graphite Solutions and Process Technology business units had a positive effect on the Group's performance.

Outlook
In line with the course of business in the first three months of 2024, the company confirms its sales and earnings outlook for the 2024 financial year. Consolidated sales for the 2024 financial year are expected to be at the previous year's level and adjusted EBITDA between €160 million and €170 million.

adidas introduces its 15-piece SS24 Paris Collection ahead of the 2024 clay season. Built to help players adapt to clay court conditions, the collection includes a core 8-piece range of apparel and footwear to help raise awareness of adidas’ annual Move For The Planet activation.

Designed to be played in seasonably warm Parisian temperatures, the collection features HEAT.RDY technology – breathable and lightweight fabrics that maximize airflow, to help keep players feel comfortable on court. Meanwhile increased mobility is unlocked thanks to adidas’ FreeLift Construction – a paneled fabric structure under the armpits – that enables greater freedom of arm movement during play while preventing the hems from riding up.

The pieces have been intentionally paired back, using zero prints to allow other bolder design features to make maximum impact, through striking color blocking, engineered paneling and textured fabrics. White and black panels on the garments emulate classic tennis court lines, highlighted by black bonding seams, meanwhile a stimulating Orange ‘Spark’ is used throughout to foster a sense of joyful energy for players during high-pressure games.

The collection will be worn by athletes including Caroline Wozniacki , Elina Svitolina, Xinyu Wang, Dana Mathewson, Jessica Pegula, Maria Sakkari, Stefanos Tsitsipas , Felix Auger Aliassime, Jason Wu and Martin de la Puente.

CARBIOS and Hündgen Entsorgungs GmbH & Co. KG (Hündgen), a waste management expert in logistics, sorting services and the recycling of recyclable materials from waste mixtures, announce the signing of a non-binding Memorandum of Understanding relating to the sourcing, preparation and recycling of 15kt/year of post-consumer PET waste using CARBIOS’ biorecycling technology at its first commercial plant in Longlaville, from end 2026.

The partnership will leverage Hündgen’s expertise and network in the sourcing and preparation of light packaging waste collected from German households. This PET waste will be prepared into flakes ready for biorecycling using CARBIOS’ enzymatic depolymerization technology, which produces food-grade PTA and MEG, further re-polymerized into PET.

The supply partnership with Hündgen contributes to securing the majority of CARBIOS’ feedstock needs for its first commercial plant in Longlaville, France. This plant will have a 50kt/year capacity when it will be fully operational and is currently under construction. This latest sourcing announcement comes in addition to previously announced agreements, such as with Landbell Group for food trays from Germany, and the winning CITEO tender for trays in France. The location of the Longlaville plant is strategically close to nearby waste supplies in Belgium, Germany and Luxembourg.

Through its enzymatic depolymerization process, CARBIOS can process all types of PET waste, including waste that cannot be recycled with current technologies. Multilayered, colored, and opaque packaging waste as well as polyester textile waste now have circular recycling solutions.

Computerized flat knitting technologist SHIMA SEIKI MFG., LTD. of Wakayama, Japan will exhibit at the upcoming International Exhibition for Garment, Textile Machinery and Accessories (IGATEX Pakistan 2024) exhibition in Lahore, Pakistan.

On display will be SHIMA SEIKI’s N.SSR®072 14G computerized flat knitting machine and SDS®-ONE APEX4 3D design system.

Shown for the first time in Pakistan, SHIMA SEIKI’s new N.SSR®072 computerized jacquard collar machine can produce shaped collars efficiently based on computer-generated designs. N.SSR®072 is based on the workhorse N.SSR®112 garment shaping machine, and offers similar leading technology in an economical yet reliable package.

Design is demonstrated on SHIMA SEIKI's SDS®-ONE APEX4 design system. At the core of the company’s "Total Fashion System" concept, it provides support throughout the supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to machine programming, production and even sales promotion. Especially effective is the way SDS®-ONE APEX4 improves on the product planning and design evaluation process by replacing physical samples with digital prototypes. Based on photo-realistic simulations, these virtual samples minimize the need for actual sample-making, realizing significant savings in time, cost and material.

Integrated textile mill Nuevo Mundo is partnering with Archroma to offer collections utilizing Archroma’s EarthColors® agricultural waste based dyes and produced with zero liquid discharge and substantial resource savings.

A strategic partner of apparel brands, Nuevo Mundo is a market leader in South America with a 75-year history. It helps brands expand into new markets with value-added products that capture growing consumer demand for quality and sustainability. The company is a pioneer in the adoption of water-saving processes and chemicals that have minimal impact on the environment.

Nuevo Mundo is now reinforcing its commitment to sustainability with the creation of new collections that utilize Archroma’s biowaste-based EarthColors® dyes. Based on patented Archroma technology, these high-performance dyes are from non-edible agricultural or herbal industry waste in a process that helps to reduce the negative impact on water footprint, natural resources and climate change compared to conventional synthetic dye production where toxic and non-renewable oil derivative products are used as raw material.*

The organic raw materials used for the dyes created for Nuevo Mundo include residues from cotton plants, beets and saw palmetto. In addition to using these biowaste-based dyes, the EarthColors® collections will be produced in Nuevo Mundo’s zero liquid discharge facilities, providing savings in time, water and energy, as well as emissions.

Nuevo Mundo and Archroma intend their alliance to be a long-term collaboration, with plans to release new collections based on EarthColors® in the coming year and beyond.

*Based on internal LCA comparative screening

Stahl, a provider of speciality coatings and treatments for flexible substrates, has launched the protective coating Stahl Integra® Dry 725, meeting the increasing demand for water-repellant technical fabrics.  
 
Part of the Stahl Integra® toolbox, Stahl Integra® Dry 725 is a fluorine-free coating for water-repellent technical textiles that harnesses Stahl’s proven polymer technology. Stahl has introduced Stahl Integra® Dry 725 in response to the growing market demand for fluorine-free, water-repellent technical textiles, which is projected to reach USD 605.1 million by 2029.  

Stahl Integra® Dry 725 offers a balanced performance between repellency, durability and adhesion. Stahl's durable water-repellent (DWR) technology, StayDry, repels water from fabric by modifying the surface tension of fibres. The solution can be combined with other top or back coatings and is specifically designed for technical textile applications such as camping equipment or luggage. As a fluorine-free, waterborne coating that is cured at low temperatures, Stahl Integra® Dry 725 can help reduce environmental impact without compromising on quality.

Stahl Integra® is a modular 'toolbox' of tailor-made, customer-orientated protective coating solutions that simultaneously ensure product quality and superior fabric integrity. This means that specific mechanical functionalities – from flame-retardant and breathable coatings to stay-clean technologies – can be introduced at different stages of the production process to meet specific end-market requirements as needed.

Archroma and Cotton Incorporated, a research and promotion company for cotton, have renewed their eight-year collaboration to help accelerate the shift to more sustainable circular economy.

The two organizations began working together in 2016 when Cotton Incorporated approached Archroma with the goal of developing a dyestuff from the byproducts of cotton production.

The U.S., the world’s third-largest cotton producer and largest exporter, produces sustainable cotton fiber for the textile and apparel industry as well as cottonseed for food and animal feed. Cotton farming and processing also generate byproducts, such as burs, stems and leaves, that are used to create insulation, packaging, erosion control products, and more. Cotton Incorporated recognized the potential to use these natural byproducts to produce dyes.

Drawing on a century-long heritage of sulfur dye innovation, the Archroma research team was able to apply its patented EarthColors® technology to create DIRESUL® Earth-Cotton using cotton by products from the U.S. supply chain. An alternative to the usual oil-based dyes, Earth-Cotton allows brands to offer textile products in warm natural shades, using cotton to create both fabric and dye.