From the Sector

from to
Reset
2746 results
(c) adidas AG
09.05.2022

adidas and Parley’s initiative "Run for the Oceans" returns for its fifth year

  • adidas x Parley’s global impact initiative, Run for the Oceans, returns for its fifth year, uniting sporting communities across the planet
  • More activities than ever will be eligible for Run for the Oceans, with the introduction of tennis, wheelchair movement, football and more
  • People across the world can take part by signing-up to the challenge from today and logging activity between May 23 – June 8

As we approach World Oceans Day on June 8, adidas and its longstanding partner Parley for the Oceans are once again encouraging the global sporting community to turn activity into action and Run for the Oceans in 2022.

  • adidas x Parley’s global impact initiative, Run for the Oceans, returns for its fifth year, uniting sporting communities across the planet
  • More activities than ever will be eligible for Run for the Oceans, with the introduction of tennis, wheelchair movement, football and more
  • People across the world can take part by signing-up to the challenge from today and logging activity between May 23 – June 8

As we approach World Oceans Day on June 8, adidas and its longstanding partner Parley for the Oceans are once again encouraging the global sporting community to turn activity into action and Run for the Oceans in 2022.

For the first time, new activities have been introduced to the challenge, making this the most inclusive Run for the Oceans yet. People from all parts of the global sporting community are invited to hit the streets, the tennis court and the football field, and unite to help protect the oceans from plastic waste. For every 10 minutes of running from select activities, such as running, tennis or football*, recorded by participants via the adidas Runtastic app, Joyrun, Codoon, Yeudongquan or Strava, Parley will clean up the equivalent weight of one plastic bottle from beaches, remote islands, and coastlines before it reaches the ocean (up to a maximum of 250,000kg).

Launching between May 23 – June 8, the event returns for its fifth year, with the ambition of mobilising a generation to help end plastic waste. Research shows that the world is at a tipping point, with it predicted that oceans will contain more plastic than fish by 2050.

Since the beginning of the partnership in 2015, adidas has made more than 50 million pairs of shoes with Parley Ocean Plastic and close to 18 million pairs in 2021 alone - this includes plastic waste intercepted from beaches and coastal communities, preventing it from polluting the oceans.

For 2022, adidas x Parley have announced the launch of Adizero X Parley and Ultraboost 22 X Parley . With a carbon footprint of just 3.5kg per pair, the Adizero X Parley is the first time adidas and Parley have combined to launch a lower footprint concept, a milestone for the partnership delivered through innovation and with no compromise on shoe performance.  

From raw material interception, processing, packaging, all the way to the end of product life, adidas calculate and communicate its carbon footprint, conforming to an internationally recognized standard: ISO 14067. The footprint results made available provide full transparency on the complete lifecycle of the product.

Source:

adidas AG

(c) ITM, Teknik Fairs INC
06.05.2022

The countdown for ITM 2022 has begun

Organized by the partnership of Tüyap Fairs and Exhibitions Organization Inc. and Teknik Fairs Inc., the ITM 2022 International Textile Machinery Exhibition will be held at Istanbul Tüyap Fair and Congress Center on 14-18 June 2022. Hundreds of domestic and international exhibitors are looking forward to presenting their newest technologies for the first time at the ITM 2O22 Exhibition. Leading textile machinery manufacturers, global sector investors, and professional visitors are planning to come to the ITM 2022 Exhibition to examine the latest technologies closely.

Trade committees from dozens of countries are requesting to attend the ITM 2022 Exhibition, which is included in the ‘Domestic Organizations Covered by State Incentives’ list by the Ministry of Commerce. Bangladesh, India, Iran, Serbia, Czech Republic, Pakistan, Indonesia, Ethiopia, Malaysia, Mexico, Egypt and Vietnam are among the countries that requested procurement delegations.

Organized by the partnership of Tüyap Fairs and Exhibitions Organization Inc. and Teknik Fairs Inc., the ITM 2022 International Textile Machinery Exhibition will be held at Istanbul Tüyap Fair and Congress Center on 14-18 June 2022. Hundreds of domestic and international exhibitors are looking forward to presenting their newest technologies for the first time at the ITM 2O22 Exhibition. Leading textile machinery manufacturers, global sector investors, and professional visitors are planning to come to the ITM 2022 Exhibition to examine the latest technologies closely.

Trade committees from dozens of countries are requesting to attend the ITM 2022 Exhibition, which is included in the ‘Domestic Organizations Covered by State Incentives’ list by the Ministry of Commerce. Bangladesh, India, Iran, Serbia, Czech Republic, Pakistan, Indonesia, Ethiopia, Malaysia, Mexico, Egypt and Vietnam are among the countries that requested procurement delegations.

The ITM 2022 Exhibition is of great importance for Turkish textile machinery and accessories manufacturers to increase their competitiveness in exports and to sign collaborations that will result in worldwide exports. Leading textile technology brands, which focus on product development and new productions during the pandemic conditions, are looking forward to the ITM 2022 Exhibition to present their products to the market and introduce them to their customers face to face. More than 300 manufacturers will make the world launches of their latest technological innovations at the ITM 2022 Exhibition.

Source:

ITM, Teknik Fairs INC

06.05.2022

adidas grows double-digit in Western markets in Q1 2022

  • Currency-neutral sales down 3% as supply constraints reduce top-line by € 400 million
  • Western markets continue to show strong momentum with combined currency-neutral sales growing 13% across North America (+13%), EMEA (+9%) and Latin America (+38%)  
  • Gross margin down 1.9pp to 49.9% driven by significantly higher supply chain costs
  • Operating margin of 8.2% reflecting additional investments into brand, DTC, and digital
  • Net income from continuing operations reaches € 310 million
  • FY 2022 outlook for revenue and net income confirmed at the lower end due to the impact from covid-19-related lockdowns in Greater China

“In the first quarter, consumer demand for our brand and products was strong in all Western markets. Our combined sales in North America, EMEA and Latin America grew at a double-digit rate.

  • Currency-neutral sales down 3% as supply constraints reduce top-line by € 400 million
  • Western markets continue to show strong momentum with combined currency-neutral sales growing 13% across North America (+13%), EMEA (+9%) and Latin America (+38%)  
  • Gross margin down 1.9pp to 49.9% driven by significantly higher supply chain costs
  • Operating margin of 8.2% reflecting additional investments into brand, DTC, and digital
  • Net income from continuing operations reaches € 310 million
  • FY 2022 outlook for revenue and net income confirmed at the lower end due to the impact from covid-19-related lockdowns in Greater China

“In the first quarter, consumer demand for our brand and products was strong in all Western markets. Our combined sales in North America, EMEA and Latin America grew at a double-digit rate. Backed by an exceptionally strong wholesale order book and relentless focus on driving growth in our own DTC channels, we expect this positive development to continue for the rest of the year,” said adidas CEO Kasper Rorsted. “In the East, we will return to growth in Asia-Pacific in the second quarter, while we expect the challenging market environment in Greater China to continue. With strong double-digit growth in the vast majority of our markets, representing more than 80% of our business, we are well positioned for success in 2022. “

For the full press release, see attached document.

Source:

adidas AG

Photo: SGL Carbon
05.05.2022

SGL Carbon: Dynamic business development in Q1 2022 continued

  • Low impact of Ukraine war on business performance in 1st quarter
  • 12.2% increase in sales to €270.9 million based on growth in all four business units
  • Adjusted EBITDA improves by 11.5% to €36.8 million

SGL Carbon generated consolidated sales of €270.9 million in Q1 2022 (Q1 2021: €241.5 million). This corresponds to an increase of €29.4 million or 12.2% compared to the same period of the prior year. All four business units contributed to the pleasing increase in sales. In parallel, adjusted EBITDA improved by 11.5% to €36.8 million in the reporting period.

  • Low impact of Ukraine war on business performance in 1st quarter
  • 12.2% increase in sales to €270.9 million based on growth in all four business units
  • Adjusted EBITDA improves by 11.5% to €36.8 million

SGL Carbon generated consolidated sales of €270.9 million in Q1 2022 (Q1 2021: €241.5 million). This corresponds to an increase of €29.4 million or 12.2% compared to the same period of the prior year. All four business units contributed to the pleasing increase in sales. In parallel, adjusted EBITDA improved by 11.5% to €36.8 million in the reporting period.

Sales development
In the first three months of fiscal 2022, the sales increase of €29.4 million was driven by all four operating business units: Graphite Solutions (+€11.3 million), Carbon Fibers (+€6.6 million), Composite Solutions (+€7.2 million) and Process Technology (+€6.0 million).
In particular, sales to customers in the automotive and semiconductor industries and a significant recovery in the industrial applications segment were key factors in the increase in sales. Sales of the Process Technology business unit to customers in the chemical industry also developed pleasingly. The effects of the war in Ukraine, which has been ongoing since the end of February 2022, had only a little impact on SGL Carbon's sales performance in the 1st quarter.

Earnings development
Despite the increasingly difficult market environment in the course of Q1 2022, associated with temporary supply and production bottlenecks at their customers, temporarily interrupted transport routes, and significantly higher energy prices, SGL Carbon was able to keep the adjusted EBITDA margin almost stable year-on-year at 13.6%.  
Adjusted EBITDA increased by 11.5% to €36.8 million in the reporting period. Higher capacity utilization in the business units and product mix effects contributed to the improvement in earnings, together with the cost savings achieved as a result of the transformation. By contrast, higher raw material, energy and logistics costs as of end of February 2022 had a negative impact on earnings. The Carbon Fibers business unit was particularly affected by the energy price increases. One-time expenses of €9.2 million in conjunction with energy transactions burdened the Carbon Fibers business unit in the 1st quarter of 2022.  
To secure our production and delivery capabilities, around 85% of the energy requirements of the entire SGL Carbon for 2022 are price-hedged.
Adjusted EBITDA and EBIT do not include in total positive one-time effects and special items of €8.5 million, among other things from the termination of a heritable building right to a site no longer in use. Taking into account the one-time effects and special items presented as well as depreciation and amortization of €14.1 million, reported EBIT increased by 83.5% to €31.2 million (Q1 2021: €17.0 million). The net profit for the period developed correspondingly and more than tripled from €6.1 million to €21.4 million in a quarter-on-quarter comparison.

Outlook
The sales and earnings figures for the 1st quarter 2022 confirm the stable demand from different market segments. Price increases and volatility in the availability of raw materials, transportation services and energy were largely offset by savings from the transformation program and pricing initiatives at the customers.
For 2022, SGL Carbon continues to expect volatile raw material and energy prices, which were included in their forecast for 2022 at the time of planning. However, there are uncertainties about the extent and duration to which SGL Carbon and the customers will be affected by the impact of the war in Ukraine or temporary supply chain disruptions due to the lockdowns in China. Therefore, SGL Carbon's outlook for fiscal 2022 does not include supply and/or production interruptions at customers or the impact of a possible energy embargo that cannot be estimated at this time.  
SGL Carbon's forecast also implies that factor cost increases can be at least partially passed on to the customers through pricing initiatives. SGL Carbon has also included the revenue and earnings impact from the expiry of a supply contract with a major automobile manufacturer at the end of June 2022 in our forecast.

Source:

SGL Carbon

05.05.2022

Monforts at Techtextil showcasing its finishing and coating technologies

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

Energy prices are rising steeply everywhere and a particular emphasis for Monforts in Frankfurt will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as better insulation of the treatment chambers or the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air resulting in a radical reduction in the conventional heat supply required compared to gas and thermal oil heating. The modular system for heat recovery can also be extended for exhaust air cleaning and odour elimination. Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation including modification of the heating source.

With the Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

All of these very different materials require coating and finishing for maximum efficiency, using Monforts technologies which provide the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

The Monforts EcoApplicator offers further potential for sustainably achieving perfect finishes via a precise direct application system, as an alternative to conventional padding – where fabrics are immersed in a bath of the required finishing chemicals. It can significantly further reduce the energy and water required and finishes can be applied on just one side of the fabric, or both, and even separately on each side, to be sealed in place via different heating zones in the stenter.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

(c) Mimaki
05.05.2022

Mimaki with latest technology for sign and textile industries at FESPA 2022

Mimaki Europe will be showcasing its latest innovative technologies and connecting with customers at FESPA 2022 Global Printing Expo (May 31st – June 3rd Berlin). Following the success of FESPA 2021, Mimaki will return as a gold sponsor for this landmark industry event. With a host of new solutions released this year, FESPA 2022 will be the first opportunity for Mimaki to demonstrate these printers and cutters at an international event and further explain the many benefits they offer sign and textile printing companies.

Mimaki Europe will be showcasing its latest innovative technologies and connecting with customers at FESPA 2022 Global Printing Expo (May 31st – June 3rd Berlin). Following the success of FESPA 2021, Mimaki will return as a gold sponsor for this landmark industry event. With a host of new solutions released this year, FESPA 2022 will be the first opportunity for Mimaki to demonstrate these printers and cutters at an international event and further explain the many benefits they offer sign and textile printing companies.

In the Spotlight
Standout technology on show includes the new 330 series, consisting of the JV330-160, the CJV330-160 and the TS330-1600. Launched during the company’s Global Innovation Days event, the 330 Series leverages Mimaki’s cross-platform strategy, to offer a high-end yet cost effective printing solution across several sectors. The eco-solvent inkjet printers, the JV330-160 and CJV330-160, boast innovative features such as the new media changer that allows three rolls of media to be loaded simultaneously, and the XY slitter, which provides in-line X-axis and Y-axis sheet-fed cutting. The TS330-1600, which will make its international tradeshow debut at FESPA, is a sublimation printer with an improved take-up system and optional add-ons to further increase efficiency, including a 10kg ink tank supply unit and a mini jumbo roll unit.

Additionally, FESPA visitors will see Mimaki’s all new CG-AR cutting plotter.

Urbanising FESPA 2022
In line with FESPA 2022’s tagline, ‘Experience print in motion’, Mimaki’s stand will bring a vibrancy to the show, by demonstrating real-world applications alongside the machines that created them. This year will see Mimaki’s stand convey the streets of Berlin in its design, and urban inspired works by designers, including Nicky Nahafahik and Xavier Protano, all printed using various Mimaki’s printing technologies and displayed on the stand - allowing visitors experience Berlin from inside the Messe Berlin halls. Mimaki will also join forces with Dutch designer Tessa Koops to create a selection of unique fashion items, after their successful collaborations in 2019.

Celebrating Customer Success
As a centrepiece of Mimaki’s stand, the customer gallery will return to FESPA 2022, showcasing and celebrating customer samples and testimonials. There will also be live demonstrations of Mimaki’s latest technologies in dedicated sign, UV and textile application areas. The latest UV printers on display include the UJV100, and the JFX and UJF series. The acclaimed 3D printer, the 3DUJ-2207, will also return to FESPA this year to showcase the many high-quality, full-colour models, including figurines, scale models and prototypes, achievable with this cost-efficient, entry-level printer.

To answer questions about the applications and Mimaki technologies, hospitality and meeting areas will provide space for one-to-one conversations with Mimaki experts.

Source:

Mimaki / Bespoke

(c) Beaulieu International Group
05.05.2022

B.I.G. Yarns at Clerkenwell Design Week with carpet tile collections

B.I.G. Yarns has secured its debut spot at the return of Clerkenwell Design Week (24-26 May 2022) and will showcase its sustainable contract flooring to carpet makers, architects and designers.

B.I.G. Yarns’ polyamide-based collections are high-performing with a strong emphasis on elevating design through remarkable colour contrasts and patterns: from bulk continuous filament (BCF) to twisted and heat-set yarns, one-colour to multi-colour, between 650 and 15000 dTex.

Designers can tap into the Class 33 resilience and various comfort levels of its one-step 3Ply Resilya, Softitude, and new two-step ColorMind solutions to meet application requirements, as well as access monthly inspiration care of #CatchtheColor. ColorMind offers yarn diversity to support a new level of design sophistication in high-end carpet segments. The ColorMind colour bank features predefined colours, always in stock, meaning short lead times. Manufacturers can also benefit from customized lot sizes and bobbin length, creating even more flexibility and design freedom.

B.I.G. Yarns has secured its debut spot at the return of Clerkenwell Design Week (24-26 May 2022) and will showcase its sustainable contract flooring to carpet makers, architects and designers.

B.I.G. Yarns’ polyamide-based collections are high-performing with a strong emphasis on elevating design through remarkable colour contrasts and patterns: from bulk continuous filament (BCF) to twisted and heat-set yarns, one-colour to multi-colour, between 650 and 15000 dTex.

Designers can tap into the Class 33 resilience and various comfort levels of its one-step 3Ply Resilya, Softitude, and new two-step ColorMind solutions to meet application requirements, as well as access monthly inspiration care of #CatchtheColor. ColorMind offers yarn diversity to support a new level of design sophistication in high-end carpet segments. The ColorMind colour bank features predefined colours, always in stock, meaning short lead times. Manufacturers can also benefit from customized lot sizes and bobbin length, creating even more flexibility and design freedom.

B.I.G. Yarns continues to extend its ranges to reduce fossil-carbon in the industry and encourage greater product circularity. Its EqoCycle PA6 yarns incorporate recycled content originating from recycled and regenerated PA6 and are fully recyclable, improving resource efficiency and other environmental benefits throughout the value chain. Carpet tufters can also contribute to a sustainable future through less use of fossil resources and reduced greenhouse gas emissions with EqoBalance yarns. Both ranges offer the same high-quality performance as virgin-based yarns.

Source:

Beaulieu International Group / EMG

(c) PCMC, Barry-Wehmiller
05.05.2022

PCMC opens Packaging Innovation Center for printing and packaging industries

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, welcomed 70-plus customers, suppliers and area supporters to its new Packaging Innovation Center on April 26 for a ribbon-cutting ceremony, tour and overview presentation.

Located at PCMC’s headquarters in Green Bay, the facility — focused on the printing and packaging industries — will serve as a resource for training, demonstrations and industry trials, along with research and development opportunities. The new center features the latest equipment for plate mounting, anilox roll laser cleaning, and central impression and inline flexographic printing.

PCMC’s current partners at the center include 3M, All Printing Resources Inc., AV Flexologic, Clean Planet, Fox Valley Flexo Services, Harper Corporation of America, Interflex Laser Engravers, INX International Ink Co., Miraclon, Rossini s.p.a., Sandon Global, tesa SE, Wikoff Color Corporation and XSYS, in addition to Hudson-Sharp, which is part of PCMC. In the future, PCMC will seek to expand the center’s capabilities by collaborating with additional innovative companies serving the flexographic printing industry.

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, welcomed 70-plus customers, suppliers and area supporters to its new Packaging Innovation Center on April 26 for a ribbon-cutting ceremony, tour and overview presentation.

Located at PCMC’s headquarters in Green Bay, the facility — focused on the printing and packaging industries — will serve as a resource for training, demonstrations and industry trials, along with research and development opportunities. The new center features the latest equipment for plate mounting, anilox roll laser cleaning, and central impression and inline flexographic printing.

PCMC’s current partners at the center include 3M, All Printing Resources Inc., AV Flexologic, Clean Planet, Fox Valley Flexo Services, Harper Corporation of America, Interflex Laser Engravers, INX International Ink Co., Miraclon, Rossini s.p.a., Sandon Global, tesa SE, Wikoff Color Corporation and XSYS, in addition to Hudson-Sharp, which is part of PCMC. In the future, PCMC will seek to expand the center’s capabilities by collaborating with additional innovative companies serving the flexographic printing industry.

Source:

PCMC, Barry-Wehmiller

05.05.2022

adidas und Foot Locker, Inc. announce partnership for sports community and sneaker culture

adidas AG and Foot Locker, Inc. announced a new and enhanced partnership built around product innovation, elevated experiences, and deeper consumer connectivity. This enhanced relationship will establish Foot Locker as the lead partner for adidas in the basketball category, accelerate energy and hype launches, as well as include the development and expansion of key franchises across women’s, kids, and apparel. Including all Foot Locker banners in North America, EMEA, and Asia-Pacific, the new strategic partnership will target over $2 billion in retail sales by 2025, nearly tripling levels from 2021. In 2022, adidas expects to generate incremental revenues of up to €100 million as a result of the new partnership.  

adidas AG and Foot Locker, Inc. announced a new and enhanced partnership built around product innovation, elevated experiences, and deeper consumer connectivity. This enhanced relationship will establish Foot Locker as the lead partner for adidas in the basketball category, accelerate energy and hype launches, as well as include the development and expansion of key franchises across women’s, kids, and apparel. Including all Foot Locker banners in North America, EMEA, and Asia-Pacific, the new strategic partnership will target over $2 billion in retail sales by 2025, nearly tripling levels from 2021. In 2022, adidas expects to generate incremental revenues of up to €100 million as a result of the new partnership.  

Foot Locker will lead adidas' basketball offering, led by Fear of God founder and designer Jerry Lorenzo, spanning the lifestyle and performance categories, and develop exclusive positions in both areas. In addition, the collaboration will focus on key Originals franchises including NMD, Superstar and Stan Smith, and on the adidas influencer partnership portfolio. It will also include a prominent role for Foot Locker in the launch of adidas’ new Sportswear product division targeting the lifestyle consumer.

To execute the new plan, adidas will provide Foot Locker with a dedicated team to deliver an elevated consumer experience both in stores and online to help create demand and elevate the marketplace. This will involve partnership on product development, exclusive Foot Locker positioning, increased product allocations, shared marketing spend, and an elevated premium presence across Foot Locker’s entire portfolio of banners with a special focus on key cities and communities that the companies jointly serve. Lastly, to provide consumers with a seamless consumer journey, on and offline, both partners will increase their digital focus and accelerate the rollout of the adidas partner program at Foot Locker.

Source:

adidas AG

Rieter is presenting the Autoconer X6 at the upcoming ITM 2022 in Istanbul (Turkey) (c) Rieter
Autoconer X6
04.05.2022

Rieter is presenting the Autoconer X6

ITM 2022: Rieter Further Improves Attractiveness of Ring and Compact-Spinning System

  • Autoconer X6 is the key machine for highest efficiency
  • Roving frame F 40 sets industry standard at 90 seconds only for doffing
  • New top and bottom aprons NO-79201 offer greater durability
  • i-Bearing enables 24/7 visibility for fast and smart decisions
  • Berkolizer pro introduces easily adjustable UV treatment as industry-first
  • European roll out of precision winder NEO-YW to launch in Turkey

Rieter is presenting the Autoconer X6 at the upcoming ITM 2022 in Istanbul (Turkey), taking place from June 14 to June 18, 2022, which further improves the attractiveness of the company’s ring and compact-spinning offering by completing the system. In addition, Rieter is showing the roving frame F 40 which doffs at 90 seconds only. SSM’s NEO-YW precision winder is launching into the European market while three key innovations in components are being introduced.

ITM 2022: Rieter Further Improves Attractiveness of Ring and Compact-Spinning System

  • Autoconer X6 is the key machine for highest efficiency
  • Roving frame F 40 sets industry standard at 90 seconds only for doffing
  • New top and bottom aprons NO-79201 offer greater durability
  • i-Bearing enables 24/7 visibility for fast and smart decisions
  • Berkolizer pro introduces easily adjustable UV treatment as industry-first
  • European roll out of precision winder NEO-YW to launch in Turkey

Rieter is presenting the Autoconer X6 at the upcoming ITM 2022 in Istanbul (Turkey), taking place from June 14 to June 18, 2022, which further improves the attractiveness of the company’s ring and compact-spinning offering by completing the system. In addition, Rieter is showing the roving frame F 40 which doffs at 90 seconds only. SSM’s NEO-YW precision winder is launching into the European market while three key innovations in components are being introduced.

Opportunities and Challenges to the Spinning Industry

2021 was an unprecedented year for the global spinning industry. Driven by the market recovery after the pandemic and the regional shift of the industry, customers invested in new spinning systems at levels never experienced before. And despite the current uncertainties, customers continue to invest.

As market and technology leader, Rieter succeeded in this environment in posting a record order intake for 2021. This is clear evidence of the high level of trust customers have in Rieter. Dr. Norbert Klapper, CEO of Rieter, says: “Systems, machines, components, parts and services from Rieter have ensured competitiveness and success for customers over many years in the past and will continue to do so in the future.”

Dr. Klapper also comments on the challenges that lie ahead for the industry as it takes advantage of market opportunities: “The pandemic is not over yet, and business is exposed to dramatic cost increases as well as shortages in material supplies and logistics. In difficult times, it is important to work together even more closely than under normal circumstances. It’s all about true partnership and trust – the basis of Rieter’s business for 226 years.”

Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term. (c) Lectra
Hélène Viot Poirier
04.05.2022

Ross McInnes and Hélène Viot Poirier join Lectra’s Board of Directors

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 
Daniel Harari, Chairman and Chief Executive Officer of Lectra, says: “We are delighted to welcome Ross McInnes and Hélène Viot Poirier to Lectra’s Board of Directors. Through Ross McInnes’ appointment, we will benefit from his extensive experience as a director of listed companies and his knowledge of Lectra’s challenges, as well as his expertise in strategy, management, finance, and governance. Hélène Viot Poirier has extensive knowledge of the digital world and the fashion market. Her appointment will enable the Board of Directors to benefit from her expertise in acquisition strategy, management and the development of environmentally responsible products”.
 
In the last five years, Ross McInnes has been a member of Lectra’s Board of Directors, and a member of the Audit Committee, the Compensation Committee and the Strategic Committee. This first mandate came to an end in April 2020. Ross McInnes is a graduate of the University of Oxford.
 
Since 2020, as an Independent Senior Advisor, she has supported strategic internal and external growth projects in the fashion, digital and consumer goods sectors. Hélène Viot Poirier is a graduate of HEC Paris.

Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  (c) EFI
EFI Fiery®
04.05.2022

Konica Minolta and EFI Fiery New Launch

  • Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  
  • Five new Fiery servers reduce job prep time while helping to ensure colour accuracy and higher overall throughput  

Electronics For Imaging, Inc. and Konica Minolta Business Solutions Europe GmbH (Konica Minolta) have announced a continuation of their long-term partnership with the release of five new EFI™ Fiery® digital front ends (DFEs) based on the newest Fiery platform, Fiery FS500 Pro.
 
The new solutions EFI and Konica Minolta are announcing include:

·        EFI Fiery IC-319 and IC-318 v2 DFEs that will drive the Konica Minolta AccurioPress C14000/C12000 colour production presses for the high-end production printing market
·        EFI Fiery IC-319 and IC-318L v2 DFEs that will drive the Konica Minolta AccurioPress C7100/C7090 light-production colour presses
·        EFI Fiery IC-317 and IC-419 v2 DFEs that will drive the Konica Minolta AccurioPress C4080/C4070 and AccurioPrint C4065 printers.
 

  • Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  
  • Five new Fiery servers reduce job prep time while helping to ensure colour accuracy and higher overall throughput  

Electronics For Imaging, Inc. and Konica Minolta Business Solutions Europe GmbH (Konica Minolta) have announced a continuation of their long-term partnership with the release of five new EFI™ Fiery® digital front ends (DFEs) based on the newest Fiery platform, Fiery FS500 Pro.
 
The new solutions EFI and Konica Minolta are announcing include:

·        EFI Fiery IC-319 and IC-318 v2 DFEs that will drive the Konica Minolta AccurioPress C14000/C12000 colour production presses for the high-end production printing market
·        EFI Fiery IC-319 and IC-318L v2 DFEs that will drive the Konica Minolta AccurioPress C7100/C7090 light-production colour presses
·        EFI Fiery IC-317 and IC-419 v2 DFEs that will drive the Konica Minolta AccurioPress C4080/C4070 and AccurioPrint C4065 printers.
 
“With these new EFI Fiery DFEs, we continue to extend the range of what AccurioPress users can achieve,” said Olaf Lorenz, General Manager DX Branding Division Konica Minolta, Inc. “We are pleased to be the first to bring these powerful new DFE solutions into our portfolio as they bring more competitive capabilities to Konica Minolta’s digital printing portfolio.”
 
EFI Fiery FS500 Pro servers offer a higher value proposition
 
“The Fiery FS500 Pro new platform offers advanced speed, higher automation and more capability than other digital front ends,” said John Henze, vice president of sales and marketing, EFI Fiery. “Intelligent automation solutions in these new EFI Fiery DFEs also save customers labour cost and time by minimising the need for manual inspection of print jobs, improving automated u management, and eliminating the need to print a test file to determine where to place finishing lines.
 
“All this decreases cycle time and increases customers’ profit opportunities, while ensuring that they can delight their clients with printing that gets completed accurately and quickly. Reducing the time prepress and press operators must spend on these repetitive tasks also helps print business owners make staff more efficient, offsetting the difficulties they have hiring and retaining talent in today’s labour-constrained economy.”

Source:

EFI GmbH

(c) Mahlo GmbH + Co. KG
04.05.2022

Altun Tekstil acquires weft straighteners from Mahlo

Turkish company Altun Tekstil, a manufacturer of home textiles and upholstery fabrics, has ordered a total of five of the latest Orthopac RVMC-15 weft straighteners from Mahlo.

The production of textured yarns, weaving and raschel knitting as well as dyeing and finishing is included in Altun’s operations. While the focus is on tulle curtains and upholstery, the company’s fabric range also encompasses a wide variety for apparel.

When investing in the future, Altun Tekstil has consistently trusted in Mahlo and has installed 10 Mahlo Orthopac RVMC-15 weft straighteners in its two plants since 2016.

Lowest residual distortion at highest speed
All the Mahlo weft straighteners Orthopac RVMC-15 are integrated into existing production lines. Mahlo’s latest weft straightener is fit to interact and communicate via the newly mSmart concept with all production lines and provide historical data, which help to improve the production processes.

Turkish company Altun Tekstil, a manufacturer of home textiles and upholstery fabrics, has ordered a total of five of the latest Orthopac RVMC-15 weft straighteners from Mahlo.

The production of textured yarns, weaving and raschel knitting as well as dyeing and finishing is included in Altun’s operations. While the focus is on tulle curtains and upholstery, the company’s fabric range also encompasses a wide variety for apparel.

When investing in the future, Altun Tekstil has consistently trusted in Mahlo and has installed 10 Mahlo Orthopac RVMC-15 weft straighteners in its two plants since 2016.

Lowest residual distortion at highest speed
All the Mahlo weft straighteners Orthopac RVMC-15 are integrated into existing production lines. Mahlo’s latest weft straightener is fit to interact and communicate via the newly mSmart concept with all production lines and provide historical data, which help to improve the production processes.

The fully integrated units benefit from universal control technology and the intuitive Mahlo mSmart G15 visualization concept. The HMI has been optimized for userfriendliness. The visualisation concept is constantly enhanced and ready for Industry 4.0. The path to a digital future within Altun is prepared.

Source:

Mahlo GmbH + Co. KG

04.05.2022

Lenzing rides out significant cost pressure to report solid first quarter

Lenzing – In the first quarter of 2022, the Lenzing Group, like the entire manufacturing industry, was significantly affected by the extreme developments in global energy and commodity markets. A predominantly positive market environment and the strategic focus on specialty fibers such as those of the TENCEL™, LENZING™ ECOVERO™ and VEOCEL™ brands nevertheless ensured a solid revenue and earnings trend, with the effect of higher costs being largely offset.

•    Solid revenue and earnings performance despite extremely tight cost situation
•    Personnel changes on the Managing and Supervisory Boards – Stephan Sielaff appointed as the new CEO
•    Successful production start at world’s largest lyocell plant in Thailand
•    World’s largest pulp mill of its kind successfully started-up in Brazil
•    Premium textile brand TENCEL™ celebrates 30 years of sustainable fiber innovation

The Lenzing Interim Report 01-03/2022 is available on the company website.

Lenzing – In the first quarter of 2022, the Lenzing Group, like the entire manufacturing industry, was significantly affected by the extreme developments in global energy and commodity markets. A predominantly positive market environment and the strategic focus on specialty fibers such as those of the TENCEL™, LENZING™ ECOVERO™ and VEOCEL™ brands nevertheless ensured a solid revenue and earnings trend, with the effect of higher costs being largely offset.

•    Solid revenue and earnings performance despite extremely tight cost situation
•    Personnel changes on the Managing and Supervisory Boards – Stephan Sielaff appointed as the new CEO
•    Successful production start at world’s largest lyocell plant in Thailand
•    World’s largest pulp mill of its kind successfully started-up in Brazil
•    Premium textile brand TENCEL™ celebrates 30 years of sustainable fiber innovation

The Lenzing Interim Report 01-03/2022 is available on the company website.

Source:

Lenzing AG

Dana Rastocna-Illova is the new OETI Country Manager in the Czech Republic (c) OETI
Dana Rastocna-Illova
04.05.2022

New OETI Country Manager in the Czech Republic

  • Ms Dana Rastocna-Illova (Cert. Eng., PhD) took on the role of OETI Country Manager in the Czech Republic in April 2022.

Her main tasks include customer service and the expansion of the customer structure in the Czech Republic. In addition, she will be responsible for conducting the STANDARD 100 by OEKO-TEX® on-site visits.

Dana Rastocna-Illova holds a doctorate from the Slovak University of Technology in Bratislava and has been working in the textile industry for almost 25 years – about 20 of them in management positions. She also has many years of in-depth experience in the field of OEKO-TEX® certifications.

  • Ms Dana Rastocna-Illova (Cert. Eng., PhD) took on the role of OETI Country Manager in the Czech Republic in April 2022.

Her main tasks include customer service and the expansion of the customer structure in the Czech Republic. In addition, she will be responsible for conducting the STANDARD 100 by OEKO-TEX® on-site visits.

Dana Rastocna-Illova holds a doctorate from the Slovak University of Technology in Bratislava and has been working in the textile industry for almost 25 years – about 20 of them in management positions. She also has many years of in-depth experience in the field of OEKO-TEX® certifications.

Source:

OETI

03.05.2022

DOMO: Mechanische Struktursimulation für PA6-GF-Werkstoffe

  • Das MMI (Materialmodellierung, mechanische Berechnung und Spritzgusssimulation)-Team für fortgeschrittene Simulationstechnologien bietet erheblich verbesserten Service für PA6-GF-Werkstoffe
  • Integrative Simulationsumgebung lässt sich effektiv mit der Digimat-Software anwenden und gewährleistet präzise und robuste Finite-Elemente-Analysen

DOMOs fortschrittliche Simulationsumgebung MMI für PA66-Bauteile gilt auf dem Markt bereits als Referenz für präzise Simulationen. Ab sofort unterstützt dieses Simulationstool OEMs und Bauteillieferanten bei der Entwicklung von leistungsfähigen, leichten und kosteneffizienten Bauteilen aus PA6. Mit dem DOMO Service Hub können Bauteilentwickler ihre Polyamidlösungen somit schneller in Serie bringen.

Bei glasfaserverstärkten Materialien muss die Ausrichtung der Glasfasern berücksichtigt werden, die während des Spritzgussverfahrens entsteht. Dabei ermöglicht die Digimat-Software eine genaue integrative Simulation. DOMO besitzt ein umfangreiches Fachwissen bei der integrativen Simulation der TECHNYL® A-Serie von PA66-GF-Materialien und ist daher in der Lage, präzise Bauteilsimulationen durchzuführen.

  • Das MMI (Materialmodellierung, mechanische Berechnung und Spritzgusssimulation)-Team für fortgeschrittene Simulationstechnologien bietet erheblich verbesserten Service für PA6-GF-Werkstoffe
  • Integrative Simulationsumgebung lässt sich effektiv mit der Digimat-Software anwenden und gewährleistet präzise und robuste Finite-Elemente-Analysen

DOMOs fortschrittliche Simulationsumgebung MMI für PA66-Bauteile gilt auf dem Markt bereits als Referenz für präzise Simulationen. Ab sofort unterstützt dieses Simulationstool OEMs und Bauteillieferanten bei der Entwicklung von leistungsfähigen, leichten und kosteneffizienten Bauteilen aus PA6. Mit dem DOMO Service Hub können Bauteilentwickler ihre Polyamidlösungen somit schneller in Serie bringen.

Bei glasfaserverstärkten Materialien muss die Ausrichtung der Glasfasern berücksichtigt werden, die während des Spritzgussverfahrens entsteht. Dabei ermöglicht die Digimat-Software eine genaue integrative Simulation. DOMO besitzt ein umfangreiches Fachwissen bei der integrativen Simulation der TECHNYL® A-Serie von PA66-GF-Materialien und ist daher in der Lage, präzise Bauteilsimulationen durchzuführen.

Die neuen MMI-PA6-GF Materialkarten können für eine Vielzahl von Glasfaserkonzentrationen und -temperaturen sowie für elastische und elastoplastische Materialmodelle mit Versagensindikatoren eingesetzt werden. Diese sind in der Digimat Software verfügbar und führen zu den gleichen präzisen Ergebnissen wie bei den TECHNYL® A PA66-Werkstoffen. Die neuen Materialkarten heben somit die PA6-Datenbank auf das gleiche Leistungsniveau wie PA66 an. Im nächsten Schritt werden in die Digimat-Datenbank auch crashspezifische und thermische Modelle eingepflegt.

„Dank der präzisen MMI-Simulation können TECHNYL® Bauteile entwickelt werden, die leichter, leistungsfähiger und kosteneffizienter sind“, erklärt Gilles Robert, Material Expert bei DOMO. „Unsere Kunden profitieren von kürzeren Entwicklungszeiten und haben eine bessere Kontrolle über die internen Kosten. Der kontinuierliche Aufbau der TECHNYL®-Materialdatenbank erweitert das Anwendungsfeld dieser Simulationsumgebung auf PA6 Bauteile.“

Source:

DOMO Chemicals / Marketing Solutions NV

Photo: ANDRITZ
03.05.2022

ANDRITZ to supply a second needlepunch line to Manifattura Fontana

ANDRITZ has received an order from Manifattura Fontana, part of Sioen Group, to supply a complete neXline needlepunch line for the production of geotextiles to its site in Romano d’Ezzelino, Italy. Start-up of the line is planned for the fourth quarter of 2022.

The ANDRITZ needlepunch line will cover all process steps from fiber opening to automatic packaging of the product. The line will also include the latest ProWin profiling technology to enhance web weight evenness on cards and crosslappers. Another important feature is waterproof roll packaging, which is increasingly in demand on the market. Thus, Manifattura Fontana will be one of the very few players in the world to deliver fabric rolls with waterproof protection.

ANDRITZ has received an order from Manifattura Fontana, part of Sioen Group, to supply a complete neXline needlepunch line for the production of geotextiles to its site in Romano d’Ezzelino, Italy. Start-up of the line is planned for the fourth quarter of 2022.

The ANDRITZ needlepunch line will cover all process steps from fiber opening to automatic packaging of the product. The line will also include the latest ProWin profiling technology to enhance web weight evenness on cards and crosslappers. Another important feature is waterproof roll packaging, which is increasingly in demand on the market. Thus, Manifattura Fontana will be one of the very few players in the world to deliver fabric rolls with waterproof protection.

This will be the second line in only three years to be supplied by ANDRITZ to Manifattura Fontana. Manifattura Fontana is part of the Belgian technical textile group Sioen Industries. It is a leading company in the global geotextile market and provides its customers with added-value geotextiles for many applications, such as the construction of roads, railways, reservoirs, dams, and tunnels, as well as for earthworks, foundations, erosion control, drainage, waste disposal, or containment.

Source:

ANDRITZ AG

(c) SANITIZED AG
03.05.2022

SANITIZED AG launches biocide-free product for odor-free textiles

SANITIZED AG, a specialist for hygiene function in textiles, is expanding its Sanitized® Odorex™ portfolio for odorneutralizing technologies. The new OX20 product is usable on cotton, viscose, or synthetic fibers. It does not contain any biocides, it is highly wash-resistant, and it can be combined well with other effects.

Sanitized® Odorex™ is the product of several years of experience with environmentally friendly textile treatments. SANITIZED focuses heavily on the causes of, the production of, and the fighting of unpleasant sweat odor in textiles. The basis for the newly introduced biocide-free OX20 product is a metal-free polymer that neutralizes odors. It meets market requirements regarding wash-resistance with excellent results after up to 50 household washes.

SANITIZED AG, a specialist for hygiene function in textiles, is expanding its Sanitized® Odorex™ portfolio for odorneutralizing technologies. The new OX20 product is usable on cotton, viscose, or synthetic fibers. It does not contain any biocides, it is highly wash-resistant, and it can be combined well with other effects.

Sanitized® Odorex™ is the product of several years of experience with environmentally friendly textile treatments. SANITIZED focuses heavily on the causes of, the production of, and the fighting of unpleasant sweat odor in textiles. The basis for the newly introduced biocide-free OX20 product is a metal-free polymer that neutralizes odors. It meets market requirements regarding wash-resistance with excellent results after up to 50 household washes.

Versatile and highly cost-efficient
The new product can be applied in extraction, pad, and spray. It can be used on all common substrates and is compatible with other textile effects. These properties increase the flexibility and efficiency during product design, and they reduce production costs. As one of the first technologies worldwide, OX20 can be applied to synthetics in the dye bath.

Feel and wearing comfort
Binders and particle systems negatively affect the textile’s feel and moisture management. OX20 is a particle-free product with a long-lasting effect that does not change how the textile feels, nor does it affect the textile’s moisture management.

Source:

SANITIZED AG

(c) Ralph Koch for Mayer & Cie
29.04.2022

Mayer & Cie. launches upgrade kits for existing circular knitting machines

This month, the circular knitting machine manufacturer Mayer & Cie. is launching its upgrade kits for circular knitting machines that are already successfully in use by customers. With tailor-made packages, the company wants to give its users the opportunity to take advantage of technological progress in their existing machines. The aim is to improve the performance of the existing machines and to extend their service life. In addition to the machine-specific upgrade kits, the company now starts offering tailormade spare parts packages. They are intended to ensure machine availability and equip customers with spare parts for standard situations. In addition, they offer a degree of independence from possible failures in the supply chain and rising transport costs.

Longevity, a popular product property
“Longevity of our circular knitting machines is definitely a property that our satisfied customers mention regularly”, Mayer & Cie. sales director Wolfgang Müller says. The company estimates that up to 50 percent of all the circular knitting machines it has ever made are still around in the market somewhere.

This month, the circular knitting machine manufacturer Mayer & Cie. is launching its upgrade kits for circular knitting machines that are already successfully in use by customers. With tailor-made packages, the company wants to give its users the opportunity to take advantage of technological progress in their existing machines. The aim is to improve the performance of the existing machines and to extend their service life. In addition to the machine-specific upgrade kits, the company now starts offering tailormade spare parts packages. They are intended to ensure machine availability and equip customers with spare parts for standard situations. In addition, they offer a degree of independence from possible failures in the supply chain and rising transport costs.

Longevity, a popular product property
“Longevity of our circular knitting machines is definitely a property that our satisfied customers mention regularly”, Mayer & Cie. sales director Wolfgang Müller says. The company estimates that up to 50 percent of all the circular knitting machines it has ever made are still around in the market somewhere.

Upgrades boost performance and value
Value retention, maintenance and upgrades for existing machines are a key issue for the company – and for the customers who successfully use existing Mayer & Cie equipment. That’s why the company recently launched customised upgrade kits to improve the long-term performance of machines.

Low budget, clear benefit
Compared to a new machine, upgrade kits are a low-cost investment that deliver clearly defined benefits. For example, an improved yarn guide ensures a significant increase in the plating reliability and output of the machine in question.

Most of the upgrade kits is machine-specific; the aforementioned yarn guide ensures a boost in productivity for the Relanit 3.2 II and Relanit 3.2 S. For S4 machines an optimised fluff blowing device can be the solution. It ensures that less fluff is knitted in and thereby improves the fabric quality. It also reduces downtimes that would otherwise be required for cleaning. Upgrade kits suitable for most Mayer & Cie. machines are the edge trimmer to open a fabric hose before the fabric’s rolling-up and the laying facility for high-quality hose fabric.

Spare part packages: Inside is what is required
In addition to individual upgrade kits Mayer & Cie. now offers spare parts packages. They too are customised for individual machines. When purchasing a machine, the customer can also order a small or a large spare parts package. Selected specially for the machine in question, it contains the most important consumables and spare parts.
The new spare parts packages also increase customers’ independence of supply chain failures and rising transport costs.

Source:

Mayer & Cie GmbH & Co. KG

(c) Hexcel Corporation
29.04.2022

Hexcel Composite Solutions for the Automotive, Marine, Wind Energy and Recreation Markets at JEC World 2022

Hexcel will present a wide range of high-performance composite innovations for the Automotive, Marine, Wind Energy and Recreation markets during JEC World 2022 in Paris on May 3 – 5.

Hexcel will present a wide range of high-performance composite innovations for the Automotive, Marine, Wind Energy and Recreation markets during JEC World 2022 in Paris on May 3 – 5.

G-Vent Technology for Marine Structures
Hexcel has developed a new technology for out-of-autoclave (OoA) processing that delivers a game-changing reduction in process time and cost for marine manufacturers without compromising mechanical performance. Hexcel has leveraged its experience in aerospace and wind energy to develop its new G-Vent technology for OoA processing of highly loaded, thick section marine structures such as masts, foils, and wind-assisted ship propulsion (WASP) components. A full range of Hexcel marine prepregs are now available with integrated G-Vent technology, reducing the requirement for debulking steps and ensuring extremely low porosity (<1%) regardless of the laminate thickness. Leading marine non-destructive testing specialists Q.I. Composites recently confirmed that the thick section G-Vent panels they had evaluated had void contents and laminate quality in line with state-of-the-art autoclaved prepreg components. Visitors to the Hexcel stand will see a unique 400mm carbon cube cured in a single stage using 695 layers of HexPly M79 carbon fiber UD600 prepreg with G-Vent technology.

New HexPly® Nature Range Sustainable Prepregs
HexPly® Nature Range prepregs feature proven resins such as HexPly M49, M78 and M79 with bio-derived epoxy resin content. Created for use in all industrial markets, HexPly Nature Range materials can be seamlessly integrated into existing production processes, maintaining consistent mechanical performance and processing properties. A dedicated sustainability corner of the Hexcel stand will detail Nature Range products optimized for automotive, marine, wind energy and winter sport applications. The display will include an alpine ski produced by leading manufacturer Tecnica Group Ski Excellence Center which produces skis for Blizzard and for Nordica using HexPly Nature M78.1 UD flax prepreg material. In addition to the reduced environmental impact of the sustainably grown reinforcement, the flax fiber laminates also improve impact resistance and vibration damping in the ski.

HexPly® XF Surface Technology for Improved Part Surface Finish Quality
HexPly XF is a lightweight, semi-preg material that replaces traditional in-mold gel coat. It eliminates time-consuming refinishing work typically required to obtain a paint-ready surface and produces lighter, more consistent parts with shorter cycle times and a cleaner working environment. Visitors to the stand will see a composite panel illustrating a high-quality painted surface enabled with XF technology in a diverse range of industrial applications such as super yacht roof parts, Class A surface automotive panels, and both prepreg and infused wind turbine blades.

HexPly® M49 Prepreg for Automotive Visual Carbon Parts
HexPly M49 is easy to process and is especially suitable for visual carbon fiber-look applications such as the Brabus hood scoop on display on the Hexcel stand at JEC.

HexPly® Prepregs and HiMax® Reinforcements for Performance Marine Structures
Using a scale model of a Gunboat 68 performance sailing catamaran, Hexcel will illustrate how its HexPly and HiMax materials provide manufacturers with a complete set of lightweight composite solutions for high-performance marine structures. HexPly prepreg was selected for critical structural parts of the Gunboat 68 and provides very high mechanical performance including high dry and wet Tg.

Heavyweight HiMax reinforcements offer high deposition rates and remain easy to handle after cutting, making them highly suitable for industrial applications. In combination with a lightweight PrimeTex® woven fabric, the package of carbon fiber HiMax materials developed for the Gunboat 68 enabled consistent resin flow during infusion with reduced surface print-through.

Hexcel Fibers and Reinforcements for Lightweight Sporting Equipment
Sporting equipment manufacturers rely on Hexcel composite materials to deliver the ultimate performance at the lowest possible weight. Hexcel will exhibit a number of the latest high-performance sporting equipment applications such as a Bauer hockey stick featuring PrimeTex 98 gsm AS4C 3K fabric and a Corima tri-spoke cycling wheel made with lightweight Hexcel carbon fiber UD tape. Hexcel will also demonstrate how its HexTow® carbon fibers are used in key leisure and marine applications by displaying an AEROrazr solid carbon rigging component manufactured by spar and rigging manufacturer Future Fibres for the 36th America’s Cup.

 

Source:

Hexcel Corporation / 100% Marketing