From the Sector

Lectra announces its plan to acquire the entire capital and voting rights of US-based Gerber Technology. A key Industry 4.0 player in the fashion, automotive and furniture industries, Lectra designs smart industrial solutions – software, equipment, data and services – that help brands, manufacturers and retailers develop, produce and market their products.

The acquisition, if and when consummated, would allow Lectra to complement its market position and continue to enhance its offerings based on Industry 4.0 technology that will enable its customers to boost the productivity and profitability of their operations. After the French work council of Lectra is consulted and the binding documentation is signed, completion of the acquisition shall remain subject to merger control clearance and other customary conditions and shall be submitted to Lectra shareholders for approval.

The proposed combination would occur at an opportune time for both companies and their customers. The current uncertain economic climate and unprecedented challenges that fashion, automotive and furniture companies are facing due to the COVID-19 pandemic make it more important than ever for them to transform, digitalize and optimize their operations.

For over 50 years, Gerber Technology has used its proprietary technologies and deep domain expertise to provide integrated software and automated hardware solutions to companies around the world, including over 100 Fortune 500 companies in 134 countries.

The strategic combination of Gerber Technology and Lectra will create a premier advanced technology partner, able to quickly meet changing customer needs and deliver even more value through seamlessly integrated solutions. Together, the two companies will have a large installed base of product development software and automated cutting solutions in operation, with a worldwide presence and a long list of prestigious customers.

Consolidating the two companies’ research and development capabilities will enable the combined company to accelerate development of Industry 4.0 technologies and help its expanded customer base seize the full potential of these innovations.
Integrating the technology of the two companies will endow them with the resources to anticipate and address rapidly changing market conditions.

Key transaction terms

Under the proposed acquisition, Lectra would acquire all outstanding shares of Gerber Technology on a cash-free debt-free basis for an upfront payment of 175 million euros – through a combination of cash and debt – plus 5 million newly issued Lectra shares to AIPCF VI LG Funding, LP (“AIPCF VI LG”), an affiliate of American Industrial Partners that is Gerber Technology’s sole shareholder. This would represent a total amount of about 300 million euros based on Lectra’s closing share price on February 5, 2021. No contingent consideration is contemplated.

Gerber Technology’s revenues was 165 million euros in 2020.

Thanks to the strong value creation deriving from significant synergies, Lectra expects the transaction to be accretive for shareholders from 2022.

Upon closing, Daniel Harari would own c. 14.6% of the Lectra shares and AIPCF VI LG would own c. 13.3%.

Lectra’s Board of Directors would welcome a director representing AIPCF VI LG.

Daniel Harari would continue to be the Chairman and Chief Executive Officer of Lectra. Gerber Technology Chief Executive Officer, Mohit Uberoi, would assume special advisor to Daniel Harari role until end-2021.

Lectra’s shareholders would be invited to vote on the issuance of the 5 million new Lectra shares reserved to AIPCF VI LG at a dedicated Extraordinary Shareholders’ Meeting which is currently expected to be held on April 30, 2021. A report containing additional information will be made available to the shareholders prior to the Extraordinary Shareholders’ Meeting.

Lazard is acting as exclusive financial advisor to Lectra, and Latham & Watkins as legal counsel to Lectra.

Goldman Sachs is acting as exclusive financial advisor to AIPCF VI LG, and Ropes & Gray LLP, Baker Botts LLP and Gide Loyrette Nouel A.A.R.P.I. as legal counsel to AIPCF VI LG.

2020 results, update on the 2020-2022 strategic roadmap and guidance for the coming years will be disclosed on February 10, 2021.

Lectra management will discuss the transaction, provide forward-looking guidance for the combined company upon closing of the transaction and answer questions from the financial community during the February 11, 2021 webcast Analyst Conference meeting in French starting at 8:30 am (CET - Paris).

Royal DSM announces that its DSM Engineering Materials business will launch mass-balanced bio-based Arnitel®, a thermoplastic elastomer, together with Sympatex Technologies. In this way, DSM Engineering Materials is taking the next step on its sustainability journey and enabling its customers to transition to a more circular and bio-based economy.

To address growing consumer and legislative demand for lower carbon footprint and more sustainable feedstock, the sports and apparel value chain is increasingly integrating bio-based materials into its designs. By offering a new range of mass-balanced bio-based Arnitel®, DSM Engineering Materials is enabling membrane manufacturer, Sympatex Technologies to meet these demands and make more sustainable choices.

DSM’s bio-based Arnitel® is manufactured with bio-based feedstock using a mass-balance approach¹. The end product contains more than 25% bio-based content by weight.

Sympatex uses Arnitel® to manufacture its waterproof, windproof, and breathable membranes for sports applications. The transition to bio-based feedstock will maintain the unique functional properties of Arnitel® and will enable Sympatex to easily shift to a more sustainable solution with a lower carbon footprint without having to requalify materials.

¹ Mass balance accounting is a well-known approach that has been designed to trace the flow of materials through a complex value chain. The mass balance approach provides a set of rules for how to allocate the bio-based and/or recycled content to different products to be able to claim and market the content as ‘bio’-based or ‘recycled’-based. Source: Ellen MacArthur Foundation (Mass Balance White Paper).

Reinach, Switzerland, and Westlake, Ohio, 2 February 2021 - Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced a strategic partnership with technology innovator CleanKore, aiming to advance sustainable dyeing processes throughout the denim supply chain.

The agreement will allow Archroma and CleanKore to promote the benefits of each other’s technologies. This includes Archroma’s robust catalog of dyes and specialty chemicals along with CleanKore’s patented process of dyeing yarns at the denim mill that completely eliminates the need for potassium permanganate (PP) spray and laser booster to achieve the bright white abrasion effect in the garment finishing process. The result is a large and circular bright white core with a small ring of indigo dye. The technology does not just eliminate the chemicals associated in the PP spray and laser process, which is much safer for denim workers, it also allows to save significant amounts of water and energy throughout the manufacturing process from fabric to garmenting.

CleanKore initially looked at eliminating potassium permanganate due to its being classified as hazardous if inhaled or ingested, or in case of contact with the skin or the eye. It is also considered very toxic to aquatic life. No new equipment or capital expenses are needed to implement the CleanKore technology, which works on all denim fabric, including dark indigo, sulfur top/bottom and sulfur black.

This is where Archroma comes into the picture. Its global technical team of denim coloration specialists will provide support to denim mills seeking to implement the CleanKore technology and develop the desired looks and effects - with the right colors and chemical systems for their production set-up.

CleanKore estimates that the technology allows to save up to 15 liters of water per garment, or the equivalent to the drinking needs of 5 people per day, and up to 0.51 kWh of energy per garment, or the equivalent of five 100-watt light bulbs on for 1 hour. The CleanKore technology also leads to a 10% to 20% increase in production throughput, as a result of a faster garment wash-down and the elimination of PP spray.

For CleanKore CEO Darryl Costin Jr., the announcement comes at an ideal time for CleanKore: "We have successfully proven the technology with mill partners such as Arvind and other denim mills in Pakistan, Bangladesh, China, Vietnam, Thailand and the United States. The response from the industry has been overwhelmingly positive. Having a partner in Archroma, one that is highly respected for their innovation and emphasis on sustainability throughout the industry, will allow us to take CleanKore to the next level.”

Umberto Devita, Global Indigo Manager at the Archroma Global Competence Center for Denim & Casualwear, adds: "CleanKore is perfectly aligned with the 3 pillars of 'The Archroma Way to a Sustainable World: Safe, efficient, enhanced'. 'Safe' through the elimination of a potentially harmful substance and the protection of the denim workers, 'Efficient' through the reduction of resource consumption, improved productivity and cost-effective profile. And 'Enhanced' through the gorgeous colors and effects allowed with Archroma's innovations and systems, in particular our aniline-free* Denisol® Pure Indigo and Diresul® sulfur dyes. We look forward to help promoting an innovation that will help with many of the challenges facing our denim customers throughout the world. Because it’s our nature."

• ITM of TU Dresden – your research partner in the field of virtual product development at ISPO Munich
• ISPO Munich Online 2021 – the world´s leading sports business platform from February 1st to 5th 2021

The Chair of Assembly Technology for Textile Products of ITM presents itself for the first time at ISPO Munich Online 2021 – showcasing its expertise in the field of virtual product development. Its know-how in the determination of material parameters, digital data processing, and data transfer will be presented as well as its competencies in 3D/4D body shape recording via scanning, data animation for the 3D product development for functional clothing, and simulation for wear comfort/usage visualization. The Chair of Assembly Technology for Textile Products of ITM has manifested its leading global position in the virtual product development sector by successfully completing a variety of national and international interdisciplinary research projects.

Researchers of the Chair of Assembly Technology for Textile Products have been actively involved in the preparation and digital representation of material samples for the ISPO Textrends Forum. Thus, the material parameters of the ISPO Textrends Award textiles were determined for 3D fit simulations in Vidya (Assyst/Vizoo), automatically analyzed, and digitally processed by the specially developed "Material Analyzer" software. This software in addition to other state-of-the-art CAE infrastructure, such as the recently installed 4D Scanner Move4D, are essential for the further establishment and promotion of its leading position in the field of digitalization and virtual product development for garments for high-tech applications.

The researchers involved eagerly await future collaborations in this promising field of research. This pilot project presented at ISPO 2021 was coordinated by the company FOURSOURCE Group GmbH, thus enabling the characterization and 3D visualization of the award-winning materials that are presented to all visitors at ISPO 2021.

• DushaGreya is a well-known brand from talented Moscow-based designer, Natalia Dushagreya, who puts her all into her unique creations.

Combining her outstanding creativity with cutting-edge digital printing technology, Natalia has been delighting women with eye-catching, comfortable clothes, which boast unparalleled individuality and vivacity for several years. “The quality of digital prints surpasses that of traditional fabrics, both in the variety of colour compositions and in the contrast and clarity when printing small details or complex geometric elements. Digital technology makes it possible to achieve exceptionally smooth colour transitions, which is almost unattainable when using analogue printing methods. As a designer, I make sure to fully leverage the advantages of digital printing when designing and producing my collection”, says Natalia.

By the time the DushaGreya brand begun, Natalia and her like-minded associate and father, Alexander Kordovatov, already had experience in the field of sublimation printing and knew that printing on fabric for subsequent tailoring would be carried out using this technology. However, no third-party performers could be found that would meet the quality and deadline requirements of the brand, so they decided to purchase new equipment and start printing at their own site. 

Alexander says. “We also found out that Smart-T (Mimaki's distributor in Russia), the supplier of this equipment in Moscow, is highly rated by the industry community and customers due to its professional expertise, first-line service support, and highly qualified engineers.” At the end of 2019, Smart-T installed the highly anticipated Mimaki Tx300P-1800 direct textile printer at the DushaGreya facility. Today it prints fabrics for dresses, skirts, T-shirts, fleeces, jumpers, hoodies, trench coats, and other midwear.

"Mimaki Tx300P-1800 is the only printer in the Mimaki line that allows us to print on natural fabrics without pre-processing,” Alexander comments. “This gives us the ability to produce short, original print runs at no extra cost, which is vital in achieving our goals. The TP400 pigment inks used in this printer have an expanded colour gamut, so the prints are always bright and saturated.”

A polybutylene succinate (PBS) polycondensation system was commissioned at Yingkou Kanghui Petrochemical Co. Ltd. in Dalian in the Chinese Liaoning Province at the beginning of January 2021. The PBS system, for which Oerlikon Barmag Huitong Engineering supplied both equipment and engineering, has a daily production capacity of 100 tons

It is used to manufacture high-viscosity chips for biodegradable films. Consequently, Yingkou Kanghui, a subsidiary of the Hengli Group, is catering to rising demand for biodegradable polymer products – demand that is increasing not just in China, but across the globe. Yingkou Kanghui Petrochemical Co., Ltd., founded in 2011, predominantly produces polyester chips and films. By expanding its portfolio to include the manufacture of PBS products, the enterprise is positioning itself as a pioneer of biopolymer production: In view of the large quantities of plastic waste not just in the oceans, biopolymers are considered the materials of the future.

The new plant at Yingkou Kanghui Petrochemical Co, Ltd. was production-ready with the support of Oerlikon Barmag Huitong Engineering within less than 14 months following contract signing.

Hexcel is pleased to announce Type Approval Certification of its HexPly® M9 prepreg materials by DNV GL. The addition of the HexPly M9 prepreg range to Hexcel’s already comprehensive DNV GL certified portfolio provides ship and boat builders with optimal prepreg processing options.

HexPly M9 prepregs enable short cure cycles at 100˚C and above and provide a balance between ease of processing and mechanical performance. Available in high tack and medium tack variants, HexPly M9 prepregs are available with a wide range of unidirectional, woven, and multiaxial reinforcements. Partnered with Hexcel’s own HexTow® IMC2 and HexTow® HM54 / HM63 fibers, designers and engineers can optimize highly loaded composite structures such as masts, wing sails, and foils with increased glass transition temperatures (Tg) and excellent long-term fatigue performance.
 
Hexcel has completed the DNV GL certification for HexPly M9 in response to the rapidly increasing demand for type-approved high-performance prepreg materials for large composite structures in the commercial marine craft.  

Hexcel’s collaboration with Chantiers de l’Atlantique on its new Silenseas cruise ship concept – a concept that uses composite Solid Sail® propulsion as well as dual-fuel engines to reduce emissions and operating costs – is one such application. In this case, DNV GL type approval provides third-party assurance of the product’s quality, performance and consistency, and also helps to streamline the approval of composite parts that replace traditionally metallic structures.

Hexcel has supplied advanced composite materials to the marine industry for more than 40 years and manufactures a comprehensive range of DNV GL certified products including woven reinforcements, multiaxial fabrics, prepregs, and adhesive films. Hexcel is committed to developing new composite technologies for the marine sector, helping builders evolve their designs to produce lighter, more fuel-efficient, and a sustainable craft for the future.

“Our latest Type Approval Certification is an important part of our strategy to provide the most complete package of DNV GL certified composite materials for the marine sector,” said Andreas Sageder, Product Manager at Hexcel. “With the addition of our M9 prepreg resin systems, mast, ship, and boat builders have an expanded range of processing and cure options available for parts requiring higher Tg and improved fatigue performance.”

Kornit Digital, a worldwide market leader in digital textile printing technology, announced Westerbroek, Groningen-based Reclameland has invested nearly €20 million in a second production hall and state-of-the-art machines, including the Kornit Atlas system for industrial direct-to-garment (DTG) production on demand, in the past year to further accelerate growth. The fastest-growing online printer in the Netherlands, Reclameland achieved a turnover of almost €23 million in 2019 and a profit of more than €1 million.

Now the second-largest business of its type in the Netherlands, Reclameland’s workforce grew by 20% in the past year, enabling them to handle most production operations internally. They attributed increased demand for printed pieces to a strong growth in online buying, for both consumers and businesses.

“2019 marked the definitive breakthrough of online printing, and we have established ourselves as a total print solutions provider for signage, banners, posters, flags, and other digitally printed textiles,” says Wouter Haan, CEO of Reclameland.  "By continuously innovating, we can serve every type of customer. Our investment in Kornit technology has empowered us to imprint more than a thousand garments per day with a single operator, meeting the retail quality, wash and light fastness, and sustainability standards of the world’s largest apparel brands.”

“Reclameland demonstrates the vast opportunities on-demand producers have when they diversify their product offerings and align their operations for a marketplace that increasingly relies on e-commerce,” says Chris Govier, KDEU Managing Director. “Kornit technology offers the perfect foundation for making that business model a success, eliminating slow and costly steps between buyers seeing a brilliantly-designed piece virtually and having it in their hands. We are proud to support Reclameland as they grow to fulfill the promise of digital commerce.”

Reflecting the pandemic-related drop in worldwide vehicle production, Autoneum’s revenue in local currencies fell by –18.7% in 2020, although the second half of the year saw a significant market recovery. Group revenue in Swiss francs fell by –24.2% year-on-year to CHF 1 740.6 million. For the full year 2020, the EBIT margin will be around 1.5% and the free cash flow slightly over CHF 100 million.
At the Annual General Meeting on March 25, 2021, the Board of Directors will propose Liane Hirner and Oliver Streuli for election to the Board of Directors of Autoneum Holding. Peter Spuhler will not stand for re-election.

At 74.5 million, the number of light vehicles produced globally in 2020 was down –16.2% compared to the previous year, where around 89 million vehicles were manufactured. Autoneum’s revenue in local currencies decreased by –18.7% in 2020, pretty much in line with the negative market dynamics. The somewhat stronger decline of revenue compared to the market results from a lower share of Asia in Autoneum's total revenue. Impacted by the appreciation of the Swiss franc against the most important currencies for Autoneum, the consolidated revenue dropped in 2020 by –24.2% to CHF 1 740.6 million. The heterogeneous development of the first and second half of the year was characteristic for the pandemic-driven automotive year 2020. Worldwide lockdowns and production stoppages at vehicle manufacturers led to a market slump in the first six months and a corresponding loss in revenue for Autoneum. Thanks to the subsequent market recovery and catch-up effects in the second half of the year, revenue improved considerably compared to the first half of the year.

Revenue development in Asia and SAMEA region significantly better than market
While revenues in local currencies of the highest-volume Business Groups Europe and North America decreased by –25.6% and –19.3% respectively, reflecting the regional, pandemic-driven market development (Europe: –22.9%; North America: –20.1%), Business Group Asia almost held its prior-year level with an organic decline of only –2.1% in 2020 thanks to the strong upturn in automobile production in China in the second half of the year and despite the fact that the number of vehicles produced in Asia fell by –11.4%.*

Personnel changes to the Board of Directors
At the Annual General Meeting on March 25, 2021, the Board of Directors of Autoneum Holding will propose Liane Hirner and Oliver Streuli for election as new members of the Board of Directors.
Liane Hirner has been CFO and member of the Management Board of Vienna Insurance Group, based in Vienna, Austria, since 2018.*

Oliver Streuli, a Swiss national, has been CEO of PCS Holding, based in Frauenfeld (Canton Thurgau), Switzerland, since 2019.*

Peter Spuhler has been a member of the Board of Directors of Autoneum since 2011 and will not stand for re-election at the Annual General Meeting on March 25, 2021.*

*See attached document for further informationen

• ISKO Vital™+ Premium community face cover receives the NEN certification in the Netherlands.

The responsible face cover brand is the first to be awarded the Dutch standard, recently established by The Royal Netherlands Standardization Institute. The mark of conformity was issued on January 19, when ISKO Vital+ completed the certification process.

Supported by parent company ISKO’s 100-years of experience and know-how in the textile industry, ISKO Vital+’s range of Premium face covers has exceeded the requirements set out by NEN for community face covers. The recently established Dutch standard, NEN-spec 1- 2 requires manufacturers to pass rigorous testing for bacterial filtration efficiency, breathing resistance, fit and ease of use and sustainability.
With a bacterial filtration efficiency (BFE) of ≥95% that exceeds the NEN’s minimum requirement of ≥70%, the ISKO Vital+ Premium face cover is a patented 4-fold design made from ISKO Vital™ fabric, a groundbreaking textile solution created by ISKO’s in-house research and development experts. It is fluid repellent and very easy to breathe through thanks to a single layer of organic cotton which is dermatologically tested, OEKO-TEX Standard 100 certified and gentle on the skin, providing a superior level of comfort as assessed by an independent panel.

Available in different sizes and colors, the Premium face covers surpass the minimum NEN requirement for breathing resistance of <70 Pa/cm2 too, with a respiratory resistance lower than 40 Pa/cm2 – making the face covers very comfortable to wear. In addition, they are much more sustainable than disposable masks as they can be reused and hand or machine-washed up to 15 times without loss of quality. “Current circumstances are expected to last in the foreseeable future, so it is extremely important to wear proper community face covers”, explained Edgar van der Linden, ISKO Vital™ Medical Business Lead. “Thanks to the mark of conformity, it is now clear that face cover must have the highest possible filtration efficiency and must also be comfortable, expressed in the lowest possible breathing resistance. Environmental aspects are also addressed. As a supplier of washable face covers made from one innovative layer of organic cotton we consider that very important. A good community face cover offers a combination of high filtration efficiency, comfort, ease of use and minimizes the burden on the environment”.